Search

The article discusses a study on whether calcifications in breast arteries (BAC) predict future development of coronary artery calcifications (CAC). It references a study by F. Atsma et al. published in the "European Journal of Radiology." It cites that the independent effect of various risk factors on BAC and CAC was measured with logistic regression analysis. It was found in the study that BAC are predictive of subsequent development of calcifications in the coronary arteries.

Coronary artery calcium (CAC) scans contain valuable information beyond the Agatston Score which is currently reported for predicting coronary heart disease (CHD) only. We examined whether new artificial intelligence (AI) applied to CAC scans can predict non-CHD events, including heart failure, atrial fibrillation, and stroke. We applied AI-enabled automated cardiac chambers volumetry and calcified plaque characterization to CAC scans (AI-CAC) of 5830 asymptomatic individuals (52.2% women, age 61.7 ± 10.2 years) in the multi-ethnic study of atherosclerosis during 15 years of follow-up, 1773 CVD events accrued. The AUC at 1-, 5-, 10-, and 15-year follow-up for AI-CAC vs. Agatston score was (0.784 vs. 0.701), (0.771 vs. 0.709), (0.789 vs. 0.712) and (0.816 vs. 0.729) (p < 0.0001 for all), respectively. AI-CAC plaque characteristics, including number, location, density, plus number of vessels, significantly improved CHD prediction in the CAC 1-100 cohort vs. Agatston Score. AI-CAC significantly improved the Agatston score for predicting all CVD events., (© 2024. The Author(s).)

Background: We prospectively assessed the reproducibility of a novel low-dose single-volume dynamic computed tomography (CT) myocardial blood flow measurement technique., Methods: Thirty-four pairs of measurements were made under rest and stress conditions in 13 swine (54.3 ± 12.3 kg). One or two acquisition pairs were acquired in each animal with a 10-min delay between each pair. Contrast (370 mgI/mL; 0.5 mL/kg) and a diluted contrast/saline chaser (0.5 mL/kg; 30:70 contrast/saline) were injected peripherally at 5 mL/s, followed by bolus tracking and acquisition of a single volume scan (100 kVp; 200 mA) with a 320-slice CT scanner. Bolus tracking and single volume scan data were used to derive perfusion in mL/min/g using a first-pass analysis model; the coronary perfusion territories of the left anterior descending (LAD), left circumflex (LCx), and right coronary artery (RCA) were automatically assigned using a previously validated minimum-cost path technique. The reproducibility of CT myocardial perfusion measurement within the LAD, LCx, RCA, and the whole myocardium was assessed via regression analysis. The average CT dose index (CTDI) of perfusion measurement was recorded., Results: The repeated first (P myo1 ) and second (P myo2 ) single-volume CT perfusion measurements were related by P myo2 = 1.01P myo1 - 0.03(ρ = 0.96; RMSE = 0.08 mL/min/g; RMSE = 0.07 mL/min/g) for the whole myocardium, and by P reg2 = 0.86P reg1 + 0.13(ρ = 0.87; RMSE = 0.31 mL/min/g; RMSE = 0.29 mL/min/g) for the LAD, LCx, and RCA perfusion territories. The average CTDI of the single-volume CT perfusion measurement was 10.5 mGy., Conclusion: The single-volume CT blood flow measurement technique provides reproducible low-dose myocardial perfusion measurement using only bolus tracking data and a single whole-heart volume scan., Relevance Statement: The single-volume CT blood flow measurement technique is a noninvasive tool that reproducibly measures myocardial perfusion and provides coronary CT angiograms, allowing for simultaneous anatomic-physiologic assessment of myocardial ischemia., Key Points: A low-dose single-volume dynamic CT myocardial blood flow measurement technique is reproducible. Motion misregistration artifacts are eliminated using a single-volume CT perfusion technique. This technique enables combined anatomic-physiologic assessment of coronary artery disease., (© 2024. The Author(s).)

Coronary artery calcification is a significant predictor of cardiovascular disease, with current detection methods like Agatston scoring having limitations in sensitivity. This study aimed to evaluate the effectiveness of a novel CAC quantification method using dual-energy material decomposition, particularly its ability to detect low-density calcium and microcalcifications. A simulation study was conducted comparing the dual-energy material decomposition technique against the established Agatston scoring method and the newer volume fraction calcium mass technique. Detection accuracy and calcium mass measurement were the primary evaluation metrics. The dual-energy material decomposition technique demonstrated fewer false negatives than both Agatston scoring and volume fraction calcium mass, indicating higher sensitivity. In low-density phantom measurements, material decomposition resulted in only 7.41% false-negative (CAC = 0) measurements compared to 83.95% for Agatston scoring. For high-density phantoms, false negatives were removed (0.0%) compared to 20.99% in Agatston scoring. The dual-energy material decomposition technique presents a more sensitive and reliable method for CAC quantification., (© 2024. The Author(s).)

Background: Coronary artery calcium (CAC) scans contain valuable information beyond the Agatston Score which is currently reported for predicting coronary heart disease (CHD) only. We examined whether new artificial intelligence (AI) algorithms applied to CAC scans may provide significant improvement in prediction of all cardiovascular disease (CVD) events in addition to CHD, including heart failure, atrial fibrillation, stroke, resuscitated cardiac arrest, and all CVD-related deaths., Methods: We applied AI-enabled automated cardiac chambers volumetry and automated calcified plaque characterization to CAC scans (AI-CAC) of 5830 individuals (52.2% women, age 61.7±10.2 years) without known CVD that were previously obtained for CAC scoring at the baseline examination of the Multi-Ethnic Study of Atherosclerosis (MESA). We used 15-year outcomes data and assessed discrimination using the time-dependent area under the curve (AUC) for AI-CAC versus the Agatston Score., Results: During 15 years of follow-up, 1773 CVD events accrued. The AUC at 1-, 5-, 10-, and 15-year follow up for AI-CAC vs Agatston Score was (0.784 vs 0.701), (0.771 vs. 0.709), (0.789 vs.0.712) and (0.816 vs. 0.729) (p<0.0001 for all), respectively. The category-free Net Reclassification Index of AI-CAC vs. Agatston Score at 1-, 5-, 10-, and 15-year follow up was 0.31, 0.24, 0.29 and 0.29 (p<.0001 for all), respectively. AI-CAC plaque characteristics including number, location, and density of plaque plus number of vessels significantly improved NRI for CAC 1-100 cohort vs. Agatston Score (0.342)., Conclusion: In this multi-ethnic longitudinal population study, AI-CAC significantly and consistently improved the prediction of all CVD events over 15 years compared with the Agatston score.

Background: To evaluate the reproducibility of a vessel-specific minimum cost path (MCP) technique used for lobar segmentation on noncontrast computed tomography (CT)., Methods: Sixteen Yorkshire swine (49.9 ± 4.7 kg, mean ± standard deviation) underwent a total of 46 noncontrast helical CT scans from November 2020 to May 2022 using a 320-slice scanner. A semiautomatic algorithm was employed by three readers to segment the lung tissue and pulmonary arterial tree. The centerline of the arterial tree was extracted and partitioned into six subtrees for lobar assignment. The MCP technique was implemented to assign lobar territories by assigning lung tissue voxels to the nearest arterial tree segment. MCP-derived lobar mass and volume were then compared between two acquisitions, using linear regression, root mean square error (RMSE), and paired sample t-tests. An interobserver and intraobserver analysis of the lobar measurements was also performed., Results: The average whole lung mass and volume was 663.7 ± 103.7 g and 1,444.22 ± 309.1 mL, respectively. The lobar mass measurements from the initial (MLobe1) and subsequent (MLobe2) acquisitions were correlated by MLobe1 = 0.99 MLobe2 + 1.76 (r = 0.99, p = 0.120, RMSE = 7.99 g). The lobar volume measurements from the initial (VLobe1) and subsequent (VLobe2) acquisitions were correlated by VLobe1 = 0.98VLobe2 + 2.66 (r = 0.99, p = 0.160, RSME = 15.26 mL)., Conclusions: The lobar mass and volume measurements showed excellent reproducibility through a vessel-specific assignment technique. This technique may serve for automated lung lobar segmentation, facilitating clinical regional pulmonary analysis., Relevance Statement: Assessment of lobar mass or volume in the lung lobes using noncontrast CT may allow for efficient region-specific treatment strategies for diseases such as pulmonary embolism and chronic thromboembolic pulmonary hypertension., Key Points: • Lobar segmentation is essential for precise disease assessment and treatment planning. • Current methods for segmentation using fissure lines are problematic. • The minimum-cost-path technique here is proposed and a swine model showed excellent reproducibility for lobar mass measurements. • Interobserver agreement was excellent, with intraclass correlation coefficients greater than 0.90., (© 2024. The Author(s).)

Background CT lymphangiography has been used to image the lymphatic anatomy and assess lymphatic abnormalities. There is, however, a need to develop a method for quantification of lymphatic flow rate in the thoracic duct (TD). Purpose To develop and validate a TD lymphatic flow measurement technique using dynamic contrast-enhanced CT lymphangiography. Materials and Methods Lymphatic flow rate was measured with two techniques: a first-pass analysis technique based on a single compartment model and a thresholding technique distinguishing between opacified and nonopacified voxels within the TD. The measurements were validated in a swine animal model between November 2021 and September 2022. CT images were acquired at 100 kV and 200 mA using a fast-pitched helical scan mode covering the entire TD following contrast material injection into the bilateral inguinal lymph nodes. Two helical CT scans, acquired at the base and peak contrast enhancement of the TD, were used to measure lymphatic flow rate. A US flow probe surgically placed around the TD provided the reference standard measurement. CT lymphatic flow measurements were compared with the reference US flow probe measurements using regression and Bland-Altman analysis. Repeatability was determined using repeated flow measurements within approximately 10 minutes of each other. Results Eleven swine (10 male; mean weight, 43.6 kg ± 2.6 [SD]) were evaluated with 71 dynamic CT acquisitions. The lymphatic flow rates measured using the first-pass analysis and thresholding techniques were highly correlated with the reference US flow probe measurements ( r = 0.99 and 0.91, respectively) and showed good agreement with the reference standard, with Bland-Altman analysis showing small mean differences of 0.04 and 0.05 mL/min, respectively. The first-pass analysis and thresholding techniques also showed good agreement for repeated flow measurements ( r = 0.94 and 0.90, respectively), with small mean differences of 0.09 and 0.03 mL/min, respectively. Conclusion The first-pass analysis and thresholding techniques could be used to accurately and noninvasively quantify TD lymphatic flow using dynamic contrast-enhanced CT lymphangiography. © RSNA, 2023 See also the editorial by Choyke in this issue.

Rationale and Objectives: To improve the image quality of CT pulmonary angiography (CTPA) using a patient-specific timing protocol., Material and Methods: A total of 24 swine (48.5 ± 14.3 kg) underwent continuous contrast-enhanced dynamic CT acquisition over 30 s to capture the pulmonary arterial input function (AIF). Multiple contrast injections were made under different cardiac outputs (1.4-5.1 L/min), resulting in a total of 154 AIF curves. The volume scans with maximal enhancement in these AIF curves were retrospectively selected as the reference standard (group A). Two prospective CTPA protocols with bolus-tracking were then simulated using these AIF curves: one used a fixed delay of 5 s between triggering and CTPA acquisition (group B), while the other used a specific delay based on one-half of the contrast injection duration (group C). The mean attenuation, signal-to-noise (SNR) and contrast-to-noise ratios (CNR) between the three groups were then compared using independent sample t -test. Subjective image quality scores were also compared using Wilcoxon-Mann-Whitney test., Results: The mean attenuation of pulmonary arteries for group A, B and C (expressed in [HU]) were 870.1 ± 242.5 HU, 761.1 ± 246.7 HU and 825.2 ± 236.8 HU, respectively. The differences in the mean SNR and CNR between Group A and Group C were not significant (SNR: 65.2 vs. 62.4, CNR: 59.6 vs. 56.4, both p > 0.05), while Group B was significantly lower than Group A ( p < 0.05)., Conclusion: The image quality of CT pulmonary angiography is significantly improved with a timing protocol determined using contrast injection delivery time, as compared with a standard timing protocol with a fixed delay between bolus triggering and image acquisition., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Sabee Molloi reports financial support was provided by Canon America Medical Systems., (© 2023 The Author(s).)

Swine are commonly used for research on the respiratory system, but various anatomic features of the tracheobronchial tree of swine are poorly defined. The purpose of our study was to acquire normative measurements of the tracheobronchial tree of swine by using chest CT scans, thus laying a foundation for treating or studying airway disorders in this species. In our study, 33 male swine underwent thoracic CT scans; we measured anatomic features of the tracheobronchial tree, including the diameter, length, and angle of various airway structures. We further analyzed the relationships among selected principal parameters. Our data revealed several similarities and differences in anatomy between swine and humans. This information may be useful in future research.

Purpose: Agatston scoring does not detect all the calcium present in computed tomography scans of the heart. A technique that removes the need for thresholding and quantifies calcium mass more accurately and reproducibly is needed., Approach: Integrated intensity and volume fraction techniques were evaluated for accurate quantification of calcium mass. Integrated intensity calcium mass, volume fraction calcium mass, Agatston scoring, and spatially weighted calcium scoring were compared with known calcium mass in simulated and physical phantoms. The simulation was created to match a 320-slice CT scanner. Fat rings were added to the simulated phantoms, which resulted in small ( 30 × 20    cm 2 ), medium ( 35 × 25    cm 2 ), and large ( 40 × 30    cm 2 ) phantoms. Three calcification inserts of different diameters and hydroxyapatite densities were placed within the phantoms. All the calcium mass measurements were repeated across different beam energies, patient sizes, insert sizes, and densities. Physical phantom images from a previously reported study were then used to evaluate the accuracy and reproducibility of the techniques., Results: Both integrated intensity calcium mass and volume fraction calcium mass yielded lower root mean squared error (RMSE) and deviation (RMSD) values than Agatston scoring in all the measurements in the simulated phantoms. Specifically, integrated calcium mass (RMSE: 0.49 mg, RMSD: 0.49 mg) and volume fraction calcium mass (RMSE: 0.58 mg, RMSD: 0.57 mg) were more accurate for the low-density stationary calcium measurements than Agatston scoring (RMSE: 3.70 mg, RMSD: 2.30 mg). Similarly, integrated calcium mass (15.74%) and volume fraction calcium mass (20.37%) had fewer false-negative (CAC = 0) measurements than Agatston scoring (75.00%) and spatially weighted calcium scoring (26.85%), on the low-density stationary calcium measurements., Conclusion: The integrated calcium mass and volume fraction calcium mass techniques can potentially improve risk stratification for patients undergoing calcium scoring and further improve risk assessment compared with Agatston scoring., (© 2023 Society of Photo-Optical Instrumentation Engineers (SPIE).)

Background: Computed tomography pulmonary angiography (CTPA) is the primary modality for the detection and diagnosis of pulmonary embolism (PE) while the stratification of PE severity remains challenging using angiography. Hence, an automated minimum-cost path (MCP) technique was validated to quantify the subtended lung tissue distal to emboli using CTPA., Methods: A Swan-Ganz catheter was placed in the pulmonary artery of seven swine (body weight: 42.6±9.6 kg) to produce different PE severities. A total of 33 embolic conditions were generated, where the PE location was adjusted under fluoroscopic guidance. Each PE was induced by balloon inflation followed by computed tomography (CT) pulmonary angiography and dynamic CT perfusion scans using a 320-slice CT scanner. Following image acquisition, the CTPA and the MCP technique were used to automatically assign the ischemic perfusion territory distal to the balloon. Dynamic CT perfusion was used as the reference standard (REF) where the low perfusion territory was designated as the ischemic territory. The accuracy of the MCP technique was then evaluated by quantitatively comparing the MCP-derived distal territories to the perfusion-derived reference distal territories by mass correspondence using linear regression, Bland-Altman analysis, and paired sample t -test. The spatial correspondence was also assessed., Results: The MCP-derived distal territory masses ( Mass MCP , g) and the reference standard ischemic territory masses ( Mass REF , g) were related by Mass MCP =1.02 Mass REF - 0.62 g (r=0.99, paired t -test P=0.51). The mean Dice similarity coefficient was 0.84±0.08., Conclusions: The MCP technique enables accurate assessment of lung tissue at risk distal to a PE using CTPA. This technique can potentially be used to quantify the fraction of lung tissue at risk distal to PE to further improve the risk stratification of PE., Competing Interests: Conflicts of Interest: All authors have completed the ICMJE uniform disclosure form (available at https://qims.amegroups.com/article/view/10.21037/qims-22-791/coif). S Molloi has previously received grants from Canon America Medical Systems. The other authors have no conflicts of interest to declare, (2023 Quantitative Imaging in Medicine and Surgery. All rights reserved.)

Objectives: The objective was to retrospectively develop a protocol in swine for optimal contrast media timing in coronary CT angiography (CCTA)., Methods: Several dynamic acquisitions were performed in 28 swine (55 ± 24 kg) with cardiac outputs between 1.5 and 5.5 L/min, for 80 total acquisitions. The contrast was injected (1mL/kg, 5mL/s, Isovue 370), followed by dynamic scanning of the entire aortic enhancement curve, from which the true peak time and aortic and coronary enhancements were recorded as the reference standard. Each dataset was then used to simulate two different CCTA protocols-a new optimal protocol and a standard clinical protocol. For the optimal protocol, the CCTA was acquired after bolus tracking-based trigging using a variable time delay of one-half the contrast injection time interval plus 1.5 s. For the standard protocol, the CCTA was acquired after bolus tracking-based triggering using a fixed time delay of 5 s. For both protocols, the CCTA time, aortic enhancement, coronary enhancement, and coronary contrast-to-noise ratio (CNR) were quantitatively compared to the reference standard measurements., Results: For the optimal protocol, the angiogram was acquired within -0.15 ± 0.75 s of the true peak time, for a mean coronary CNR within 7% of the peak coronary CNR. Conversely, for the standard CCTA protocol, the angiogram was acquired within -1.82 ± 1.71 s of the true peak time, for a mean coronary CNR that was 23% lower than the peak coronary CNR., Conclusions: The optimal CCTA protocol improves contrast media timing and coronary CNR by acquiring the angiogram at the true aortic root peak time., Key Points: • This study in swine retrospectively developed the mathematical basis of an improved approach for optimal contrast media timing in CCTA. • By combining dynamic bolus tracking with a simple contrast injection timing relation, CCTA can be acquired at the peak of the aortic root enhancement. • CCTA acquisition at the peak of the aortic root enhancement should maximize the coronary enhancement and CNR, potentially improving the accuracy of CT-based assessment of coronary artery disease., (© 2022. The Author(s).)

Aims: The goal of this study was to examine the association of breast arterial calcification (BAC) presence and quantity with incident atrial fibrillation (AF) in a large cohort of post-menopausal women., Methods and Results: We conducted a longitudinal cohort study among women free of clinically overt cardiovascular disease and AF at baseline (between October 2012 and February 2015) when they attended mammography screening. Atrial fibrillation incidence was ascertained using diagnostic codes and natural language processing. Among 4908 women, 354 incident cases of AF (7%) were ascertained after a mean (standard deviation) of 7 (2) years of follow-up. In Cox regression adjusting for a propensity score for BAC, BAC presence vs. absence was not significantly associated with AF [hazard ratio (HR) = 1.12; 95% confidence interval (CI), 0.89-1.42; P = 0.34]. However, a significant (a priori hypothesized) age by BAC interaction was found ( P = 0.02) such that BAC presence was not associated with incident AF in women aged 60-69 years (HR = 0.83; 95% CI, 0.63-1.15; P = 0.26) but was significantly associated with incident AF in women aged 70-79 years (HR = 1.75; 95% CI, 1.21-2.53; P = 0.003). No evidence of dose-response relationship between BAC gradation and AF was noted in the entire cohort or in age groups separately., Conclusion: Our results demonstrate, for the first time, an independent association between BAC and AF in women over age 70 years., Competing Interests: Conflict of interest: None declared., (© The Author(s) 2023. Published by Oxford University Press on behalf of the European Society of Cardiology.)

Background: Prior studies support the utility of high sensitivity troponin I (hsTnI) for cardiovascular disease (CVD) risk stratification among asymptomatic populations; however, only two prior studies examined women separately. The association between hsTnI and breast arterial calcification is unknown., Methods: Cohort study of 2896 women aged 60-79 years recruited after attending mammography screening between 10/2012 and 2/2015. BAC status (presence versus absence) and quantity (calcium mass mg) was determined using digital mammograms. Pre-specified endpoints were incident coronary heart disease (CHD), ischemic stroke, heart failure and its subtypes and all CVD., Results: After 7.4 (SD = 1.7) years of follow-up, 51 CHD, 30 ischemic stroke and 46 heart failure events were ascertained. At a limit of detection of 1.6 ng/L, 98.3 of the cohort had measurable hsTnI concentration. HsTnI in the 4-10 ng/L range were independently associated of CHD (adjusted hazard ratio[aHR] = 2.78; 95% CI, 1.48-5.22; p = 0.002) and all CVD (aHR = 2.06; 95% CI, 1.37-3.09; p = 0.0005) and hsTnI over 10 ng/L was independently associated with CHD (aHR = 4.75; 95% CI, 1.83-12.3; p = 0.001), ischemic stroke (aHR = 3.81; 95% CI, 1.22-11.9; p = 0.02), heart failure (aHR = 3.29; 95% CI, 1.33-8.13; p = 0.01) and all CVD (aHR = 4.78; 95% CI, 2.66-8.59; p < 0.0001). No significant association was found between hsTnI and BAC. Adding hsTnI to a model containing the Pooled Cohorts Equation resulted in significant and clinical important improved calibration, discrimination (Δ C index  = 6.5; p = 0.02) and reclassification (bias-corrected clinical NRI = 0.18; 95% CI, -0.13-0.49 after adding hsTnI categories)., Conclusions: Our results support the consideration of hsTnI as a risk enhancing factor for CVD in asymptomatic women that could drive preventive or therapeutic decisions., Competing Interests: C.I. is a consultant for Abbott Diagnostics. 10.13039/100014386Abbott Diagnostics performed the ARCHITECT assays for hs-cTn I and BNP and provided financial support to the MINERVA Biomarkers Study., (© 2022 The Authors.)

The aim of this study was to validate a motion-immune (MI) solution to dynamic CT myocardial perfusion measurement, in the presence of motion without image registration. The MI perfusion technique was retrospectively validated in six swine (37.3 ± 7.5 kg) with a motion-susceptible (MS) perfusion technique performed for comparison. In each swine, varying severities of stenoses were generated in the left anterior descending (LAD) coronary artery using a balloon under intracoronary adenosine stress, followed by contrast-enhanced imaging with 20 consecutive volume scans per stenosis. Two volume scans were then systematically selected from each acquisition for both MI and MS perfusion measurement, where the resulting LAD and left circumflex (LCx) measurements were compared to reference microsphere perfusion measurements using regression and diagnostic performance analysis. The MI (P MI ) and microsphere (P MICRO ) perfusion measurements were related through regression by P MI  = 0.98 P MICRO  + 0.03 (r = 0.97), while the MS (P MS ) and microsphere (P MICRO ) perfusion measurements were related by P MS  = 0.62 P MICRO  + 0.15 (r = 0.89). The accuracy of the MI and MS techniques in detecting functionally significant stenosis was 93% and 84%, respectively. The motion-immune (MI) perfusion technique provides accurate myocardial perfusion measurement in the presence of motion without image registration., (© 2022. The Author(s).)

The purpose of this study is to develop and validate an optimal timing protocol for a low-radiation-dose CT pulmonary perfusion technique using only two volume scans. A total of 24 swine (48.5 ± 14.3 kg) underwent contrast-enhanced dynamic CT. Multiple contrast injections were made under different pulmonary perfusion conditions, resulting in a total of 141 complete pulmonary arterial input functions (AIFs). Using all the AIF curves, an optimal contrast timing protocol was developed for a first-pass, two-volume dynamic CT perfusion technique (one at the base and the other at the peak of AIF curve). A subset of swine was used to validate the prospective two-volume pulmonary perfusion technique. The prospective two-volume perfusion measurements were quantitatively compared to the previously validated retrospective perfusion measurements with t-test, linear regression, and Bland-Altman analysis. As a result, the pulmonary artery time-to-peak ([Formula: see text]) was related to one-half of the contrast injection duration ([Formula: see text]) by [Formula: see text] (r = 0.95). The prospective two-volume perfusion measurements (P PRO ) were related to the retrospective measurements (P RETRO ) by P PRO  = 0.87P RETRO  + 0.56 (r = 0.88). The CT dose index and size-specific dose estimate of the two-volume CT technique were estimated to be 28.4 and 47.0 mGy, respectively. The optimal timing protocol can enable an accurate, low-radiation-dose two-volume dynamic CT perfusion technique., (© 2022. The Author(s).)

Background: Breast arterial calcification (BAC), a common incidental finding in mammography, has been shown to be associated with angiographic coronary artery disease and cardiovascular disease (CVD) outcomes. We aimed to (1) examine the association of BAC presence and quantity with hard atherosclerotic CVD (ASCVD) and global CVD; (2) ascertain model calibration, discrimination and reclassification of ASCVD risk; (3) assess the joint effect of BAC presence and 10-year pooled cohorts equations risk on ASCVD., Methods: A cohort study of 5059 women aged 60-79 years recruited after attending mammography screening between October 2012 and February 2015 was conducted in a large health plan in Northern California, United States. BAC status (presence versus absence) and quantity (calcium mass mg) was determined using digital mammograms. Prespecified end points were incident hard ASCVD and a composite of global CVD., Results: Twenty-six percent of women had BAC >0 mg. After a mean (SD) follow-up of 6.5 (1.6) years, we ascertained 155 (3.0%) ASCVD events and 427 (8.4%) global CVD events. In Cox regression adjusted for traditional CVD risk factors, BAC presence was associated with a 1.51 (95% CI, 1.08-2.11; P =0.02) increased hazard of ASCVD and a 1.23 (95% CI, 1.002-1.52; P =0.04) increased hazard of global CVD. While there was no evidence of dose-response association with ASCVD, a threshold effect was found for global CVD at very high BAC burden (95th percentile when BAC present). BAC status provided additional risk stratification of the pooled cohorts equations risk. We noted improvements in model calibration and reclassification of ASCVD: the overall net reclassification improvement was 0.12 (95% CI, 0.03-0.14; P =0.01) and the bias-corrected clinical-net reclassification improvement was 0.11 (95% CI, 0.01-0.22; P =0.04) after adding BAC status., Conclusions: Our results indicate that BAC has potential utility for primary CVD prevention and, therefore, support the notion that BAC ought to be considered a risk-enhancing factor for ASCVD among postmenopausal women.

Rationale and Objectives: To validate the accuracy of a novel low-dose dynamic CT perfusion technique in a swine model using fluorescent microsphere measurement as the reference standard., Materials and Methods: Contrast-enhanced dynamic CT perfusion was performed in five swine at baseline and following brain embolization. Reference microspheres and intravenous contrast (370 mg/ml iodine, 1 ml/kg) were injected (5 ml/s), followed by dynamic CT perfusion. Scan parameters were 320×0.5 mm, 100 kVp and 200 mA. On average, 47 contrast-enhanced volume scans were acquired per acquisition to capture the time attenuation curve. For each acquisition, only two systematically selected volume scans were used to quantify brain perfusion with first-pass analysis technique. The first volume scan was selected at the base, simulating bolus tracking, while the second volume at the peak of the time attenuation curve similar to a CT angiogram. Regional low-dose CT perfusion measurements were compared to the microsphere perfusion measurements with t-test, linear regression and Bland-Altman analysis. The radiation dose of the two-volume CT perfusion technique was determined., Results: Low-dose CT perfusion measurements (P CT ) showed excellent correlation with reference microsphere perfusion measurements (P MICRO ) by P CT  = 1.15 P MICRO  - 0.01 (r = 0.93, p ≤ 0.01). The CT dose index and dose-length product for the two-volume CT perfusion technique were 25.6 mGy and 409.6 mGy, respectively., Conclusions: The accuracy and repeatability of a low-dose dynamic CT perfusion technique was validated in a swine model. This technique has the potential for accurate diagnosis and follow up of stroke and vasospasm., (Copyright © 2021 Elsevier Masson SAS. All rights reserved.)

Purpose: Small airways with inner diameters less than 2 mm are sites of major airflow limitations in patients with chronic obstructive pulmonary disease (COPD) and asthma. The purpose of this study is to investigate the limitations for accurate assessment of small airway dimensions using both high-resolution CT (HRCT) and conventional normal-resolution CT at low dose levels., Methods: To model the normal human airways from the 3rd to 20th generations, a cylindrical polyurethane phantom with 14 airway tubes of inner diameters (ID) ranging from 0.3 to 3.4 mm and wall thicknesses (WT) ranging from 0.15 to 1.6 mm was placed within an Anthropomorphic QRM-Thorax phantom. The Aquilion Precision (Canon Medical Systems Corporation) HRCT scanner was used to acquire images at 80, 100, and 120 kV using high resolution mode (HR, 0.25 mm × 160 detector configuration) and normal-resolution (NR) mode (0.5 mm × 80 detector configuration). The HR data were reconstructed using a 1024 × 1024 matrix (0.22 × 0.22 × 0.25 mm voxel size) and the NR data were reconstructed using a 512 × 512 matrix (0.43 × 0.43 × 0.50 mm). Two reconstruction algorithms (filtered back projection; FBP and an adaptive iterative dose reduction 3D algorithm; AIDR 3D) and three reconstruction kernels (FC30, FC52, and FC56) were investigated. The C T D I vol dose values ranged from 0.2 to 6.2 mGy. A refined automated full-width half-maximum (FWHM) method was used for the measurement of airway dimensions, where the density profiles were computed by radial oversampling using a polar coordinate system. Both ID and WT were compared to the known dimensions using a regression model, and the root-mean-square error (RMSE) and average error were computed across all 14 airway tubes., Results: The results indicate that the ID can be measured within a 15% error down to approximately 0.8 and 2.0 mm using the HR and NR modes, respectively. The overall RMSE (and average error) of ID measurements for HR and NR were 0.10 mm (-0.70%) and 0.31 mm (-2.63%), respectively. The RMSE (and average error) of WT measurements using HR and NR were 0.10 mm (23.27%) and 0.27 mm (53.56%), respectively. The WT measurement using HR yielded a factor of two improvement in accuracy as compared to NR., Conclusions: High-resolution CT can provide more accurate measurements of airway dimensions as compared with NR CT, potentially improving quantitative assessment of pathologies such as COPD and asthma. The HR mode acquired and reconstructed with AIDR3D and the FC52 kernel provides most accurate measurement of airway dimensions. Low-dose HR measurements at dose level above 0.9 mGy can provide improved accuracy on both inner diameters and wall thicknesses compared to full dose NR airway phantom measurements., (© 2021 American Association of Physicists in Medicine.)

Background: Since vascular risk factors are implicated in cognitive decline, and breast arterial calcification (BAC) is related to vascular risk, we postulated that BAC may be associated with cognitive impairment and dementia. Methods: We used a multiethnic cohort of 3,913 asymptomatic women 60-79 years of age recruited after mammography screening at a large health plan in 2012-2015. A BAC mass score (mg) was derived from digital mammograms. Cognitive function was measured at baseline using the Montreal Cognitive Assessment (MoCA) and incident all-cause dementia ( n  = 49 events; median follow-up = 5.6 years) were ascertained with validated ICD-9 and ICD-10 codes. We used cross-sectional linear regression of MoCA scores on BAC, then multinomial logistic regression predicting mild cognitive impairment not progressing to dementia and incident all-cause dementia and, finally, Cox regression of incident all-cause dementia. Results: No association by linear regression was found between MoCA scores and BAC presence in unadjusted or adjusted analysis. Women with severe (upper tertile) BAC had a MoCA score lower by 0.58 points (standard error [SE] = 0.18) relative to women with no BAC. However, this difference disappeared after multivariate adjustment. No significant associations were found in multinomial logistic regression for either BAC presence or gradation in unadjusted or adjusted analysis. No significant associations were found between BAC presence with incident all-cause dementia (fully adjusted hazard ratio = 0.74; 95% confidence interval: 0.39-1.39). Likewise, no significant association with incident all-cause dementia was noted for BAC gradation. Conclusions: Our results do not support the hypothesis that BAC presence or gradation may contribute to cognitive impairment or development of all-cause dementia.

Morphological and physiological assessment of coronary artery disease (CAD) is necessary for proper stratification of CAD risk. The objective was to evaluate a low-dose cardiac CT technique that combines morphological and physiological assessment of CAD. The low-dose technique was evaluated in twelve swine, where three of the twelve had coronary balloon stenosis. The technique consisted of rest perfusion measurement combined with angiography followed by stress perfusion measurement, where the ratio of stress to rest was used to derive coronary flow reserve (CFR). The technique only required two volume scans for perfusion measurement in mL/min/g; hence, four volume scans were acquired in total; two for rest with angiography and two for stress. All rest, stress, and CFR measurements were compared to a previously validated reference technique that employed 20 consecutive volume scans for rest perfusion measurement combined with angiography, and stress perfusion measurement, respectively. The 32 cm diameter volumetric CT dose index ([Formula: see text]) and size-specific dose estimate (SSDE) of the low-dose technique were also recorded. All low-dose perfusion measurements (P LOW ) in mL/min/g were related to reference perfusion measurements (P REF ) through regression by P LOW  = 1.04 P REF - 0.08 (r = 0.94, RMSE = 0.32 mL/min/g). The [Formula: see text] and SSDE of the low-dose cardiac CT technique were 8.05 mGy and 12.80 mGy respectively, corresponding to an estimated effective dose and size-specific effective dose of 1.8 and 2.87 mSv, respectively. Combined morphological and physiological assessment of coronary artery disease is feasible using a low-dose cardiac CT technique.

Objectives: Breast cancer is the most common cancer in women and the second leading cause of cancer death. It is well known that breast density is an important risk factor for breast cancer and also can be used to personalize screening and for assessment of treatment response. Breast density has previously been correlated to volumetric water density. The purpose of this study is to validate the accuracy and precision of dual-energy mammography in measuring water density in postmortem breasts., Methods: Twenty pairs of postmortem breasts were imaged using dual-energy mammography with energy-sensitive photon-counting detectors. Chemical analysis was used as the reference standard to assess the accuracy of dual-energy mammography in measuring volumetric water and lipid density. Images from different views and contralateral breasts were used to assess estimate of precision for water and lipid volumetric density measurements., Results: The measured volumetric water and lipid density from dual-energy mammography and chemical analysis were in good agreement, where the standard errors of estimates (SEE) of both were calculated to be 2.1%. Volumetric water and lipid density measurements from different views were also in good agreement, with a SEE of 1.3% and 1.1%, respectively., Conclusions: The results indicate that dual-energy mammography can be used to accurately measure volumetric water and lipid density in breast tissue. Accurate quantification of volumetric water density is expected to enhance its utility as a risk factor for breast cancer and for assessment of response to therapy., Key Points: • Dual-energy mammography can be used to accurately measure water and lipid volumetric density in breast tissue. • Improved quantification of volumetric water density is expected to enhance its utility for assessment of response to therapy and as a risk factor for breast cancer.

To investigate the feasibility of quantifying the chemical composition of coronary artery plaque in terms of water, lipid, protein, and calcium contents using dual-energy computed tomography (CT) in a simulation study. A CT simulation package was developed based on physical parameters of a clinical CT scanner. A digital thorax phantom was designed to simulate coronary arterial plaques in the range of 2-5 mm in diameter. Both non-calcified and calcified plaques were studied. The non-calcified plaques were simulated as a mixture of water, lipid, and protein, while the calcified plaques also contained calcium. The water, lipid, protein, and calcium compositions of the plaques were selected to be within the expected clinical range. A total of 95 plaques for each lesion size were simulated using the CT simulation package at 80 and 135 kVp. Half-value layer measurements were made to make sure the simulated dose was within the range of clinical dual energy scanning protocols. Dual-energy material decomposition using a previously developed technique was performed to determine the volumetric fraction of water, lipid, protein, and calcium contents in each plaque. For non-calcified plaque, the total volume conservation provides the third constrain for three-material decomposition with dual energy CT. For calcified plaque, a fourth criterion was introduced from a previous report suggesting a linear correlation between water and protein contents in soft tissue. For non-calcified plaque, the root mean-squared error (RMSE) of the image-based decomposition was estimated to be 0.7%, 1.5%, and 0.3% for water, lipid, and protein contents, respectively. As for the calcified plaques, the RMSE of the 5 mm plaques were estimated to be 5.6%, 5.7%, 0.2%, and 3.1%, for water, lipid, calcium, and protein contents, respectively. The RMSE increases as the plaque size reduces. The simulation results indicate that chemical composition of coronary arterial plaques can be quantified using dual-energy CT. By accurately quantifying the content of a coronary plaque lesion, our decomposition method may provide valuable insight for the assessment and stratification of coronary artery disease.

Objectives: This study compared the accuracy of an automated, vessel-specific minimum cost path (MCP) myocardial perfusion territory assignment technique as compared with the standard American Heart Association 17-segment (AHA) model., Methods: Six swine (42 ± 9 kg) were used to evaluate the accuracy of the MCP technique and the AHA method. In each swine, a dynamic acquisition, comprised of twenty consecutive whole heart volume scans, was acquired with a computed tomography scanner, following peripheral injection of contrast material. From this acquisition, MCP and AHA perfusion territories were determined, for the left (LCA) and right (RCA) coronary arteries. Each animal underwent additional dynamic acquisitions, consisting of twenty consecutive volume scans, following direct intracoronary contrast injection into the LCA or RCA. These images were used as the reference standard (REF) LCA and RCA perfusion territories. The MCP and AHA techniques' perfusion territories were then quantitatively compared with the REF perfusion territories., Results: The myocardial mass of MCP perfusion territories (M MCP ) was related to the mass of reference standard perfusion territories (M REF ) by M MCP  = 0.99M REF  + 0.39 g (r = 1.00; R 2  = 1.00). The mass of AHA perfusion territories (M AHA ) was related to M REF by M AHA  = 0.81M REF  + 5.03 g (r = 0.99; R 2  = 0.98)., Conclusion: The vessel-specific MCP myocardial perfusion territory assignment technique more accurately quantifies LCA and RCA perfusion territories as compared with the current standard AHA 17-segment model. Therefore, it can potentially provide a more comprehensive and patient-specific evaluation of coronary artery disease., Key Points: • The minimum cost path (MCP) technique accurately determines left and right coronary artery perfusion territories, as compared with the American Heart Association 17-segment (AHA) model. • The minimum cost path (MCP) technique could be applied to cardiac computed-tomography angiography images to accurately determine patient-specific left and right coronary artery perfusion territories. • The American Heart Association 17-segment (AHA) model often fails to accurately determine left and right coronary artery perfusion territories, especially in the inferior and inferoseptal walls of the left ventricular myocardium.

Purpose: To evaluate the accuracy of a low-dose first-pass analysis (FPA) CT pulmonary perfusion technique in comparison to fluorescent microsphere measurement as the reference standard., Method: The first-pass analysis CT perfusion technique was validated in six swine (41.7 ± 10.2 kg) for a total of 39 successful perfusion measurements. Different perfusion conditions were generated in each animal using serial balloon occlusions in the pulmonary artery. For each occlusion, over 20 contrast-enhanced CT images were acquired within one breath (320 x 0.5mm collimation, 100kVp, 200mA or 400mA, 350ms gantry rotation time). All volume scans were used for maximum slope model (MSM) perfusion measurement, but only two volume scans were used for the FPA measurement. Both MSM and FPA perfusion measurements were then compared to the reference fluorescent microsphere measurements., Results: The mean lung perfusion of MSM, FPA, and microsphere measurements were 6.21 ± 3.08 (p = 0.008), 6.59 ± 3.41 (p = 0.44) and 6.68 ± 3.89 ml/min/g, respectively. The MSM (PMSM) and FPA (PFPA) perfusion measurements were related to the corresponding reference microsphere measurement (PMIC) by PMSM = 0.51PMIC + 2.78 (r = 0.64) and PFPA = 0.79PMIC + 1.32 (r = 0.90). The root-mean-square-error for the MSM and FPA techniques were 3.09 and 1.72 ml/min/g, respectively. The root-mean-square-deviation for the MSM and FPA techniques were 2.38 and 1.50 ml/min/g, respectively. The CT dose index for MSM and FPA techniques were 138.7 and 8.4mGy, respectively., Conclusions: The first-pass analysis technique can accurately measure regional pulmonary perfusion and has the potential to reduce the radiation dose associated with dynamic CT perfusion for assessment of pulmonary disease., Competing Interests: The authors have declared that no competing interests exist.

Objectives: The aim of this study was to assess the feasibility of a prospective first-pass analysis (FPA) dynamic computed tomography (CT) perfusion technique for accurate low-radiation-dose global stress perfusion measurement., Materials and Methods: The prospective FPA technique was evaluated in 10 swine (42 ± 12 kg) by direct comparison to a previously validated retrospective FPA technique. Of the 10 swine, 3 had intermediate stenoses with fractional flow reserve severities of 0.70 to 0.90. In each swine, contrast and saline were injected peripherally followed by dynamic volume scanning with a 320-slice CT scanner. Specifically, for the reference standard retrospective FPA technique, volume scans were acquired continuously at 100 kVp and 200 mA over 15 to 20 seconds, followed by systematic selection of only 2 volume scans for global perfusion measurement. For the prospective FPA technique, only 2 volume scans were acquired at 100 kVp and 50 mA for global perfusion measurement. All prospective global stress perfusion measurements were then compared with the corresponding reference standard retrospective global stress perfusion measurements through regression analysis. The CTDIvol and size-specific dose estimate of the prospective FPA technique were also determined., Results: All prospective global stress perfusion measurements (PPRO) at 50 mA were in good agreement with the reference standard retrospective global stress perfusion measurements (PREF) at 200 mA (PPRO = 1.07 PREF -0.09, r = 0.94; root-mean-square error = 0.30 mL/min per gram). The CTDIvol and size-specific dose estimate of the prospective FPA technique were 2.3 and 3.7 mGy, respectively., Conclusions: Accurate low-radiation-dose global stress perfusion measurement is feasible using a prospective FPA dynamic CT perfusion technique.

Context: The association between bone mineral density (BMD) and breast arterial calcification (BAC) remains poorly understood and controversial., Objective: The objective of this article is to examine the association between BMD and BAC in a large cohort of postmenopausal women undergoing routine mammography., Design: A cross-sectional analysis of baseline data from a multiethnic cohort was performed., Setting: The setting for this analysis is an integrated health care delivery system in Northern California in the United States., Patients: A total of 1273 women age 60 to 79 years (mean age, 67 years) were recruited within 12 months of screening mammography., Main Outcome Measure: A BAC score (mg) was obtained from digital mammograms using a novel densitometry method. BAC presence was defined as a BAC score greater than 0 mg, and severe BAC as a BAC score greater than 20 mg., Results: Overall, 53% of women had osteopenia and 21% had osteoporosis. The prevalence of BAC greater than 0 mg was 29%, 30%, and 29% among women with normal BMD, osteopenia, and osteoporosis, respectively ( P  = 0.98). The prevalence of BAC greater than 20 mg was 5%, 3%, and 5% among women with normal BMD, osteopenia and osteoporosis, respectively ( P  = .65). The odds ratios (ORs) of BAC greater than 0 mg vs BAC = 0 mg after multivariable adjustment were 1.09 (95% CI, 0.81-1.48; P  = .54) for osteopenia and 0.99 (95% CI, 0.69-1.48; P  = .98) for osteoporosis. The adjusted ORs for BAC greater than 20 mg vs BAC 20 mg or less were 1.03 (95% CI, 0.52-2.01; P  = .93) for osteopenia and 1.89 (95 CI, 0.81-4.47; P  = .14) for osteoporosis., Conclusion: Our findings do not support an association of either osteopenia or osteoporosis with BAC presence or severity among postmenopausal women., (© Endocrine Society 2019.)

Rationale and Objectives: The accuracy of coronary computed tomography (CT) angiography depends upon the degree of coronary enhancement as compared to the background noise. Unfortunately, coronary contrast-to-noise ratio (CNR) optimization is difficult on a patient-specific basis. Hence, the objective of this study was to validate a new combined diluted test bolus and CT angiography protocol for improved coronary enhancement and CNR., Materials and Methods: The combined diluted test bolus and CT angiography protocol was validated in six swine (28.9 ± 2.7 kg). Specifically, the aortic and coronary enhancement and CNR of a standard CT angiography protocol, and a new combined diluted test bolus and CT angiography protocol were compared to a reference retrospective CT angiography protocol. Comparisons for all data were made using box plots, t tests, regression, Bland-Altman, root-mean-square error and deviation, as well as Lin's concordance correlation., Results: The combined diluted test bolus and CT angiography protocol was found to improve aortic and coronary enhancement by 26% and 13%, respectively, as compared to the standard CT angiography protocol. More importantly, the combined protocol was found to improve aortic and coronary CNR by 29% and 20%, respectively, as compared to the standard protocol., Conclusion: A new combined diluted test bolus and CT angiography protocol was shown to improve coronary enhancement and CNR as compared to an existing standard CT angiography protocol., (Copyright © 2018 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.)

Background: Myocardial perfusion measurement with a low-dose first-pass analysis (FPA) dynamic computed tomography (CT) perfusion technique depends upon acquisition of two whole-heart volume scans at the base and peak of the aortic enhancement. Hence, the objective of this study was to validate an optimal timing protocol for volume scan acquisition at the base and peak of the aortic enhancement., Methods: Contrast-enhanced CT of 28 Yorkshire swine (weight, 55 ± 24 kg, mean ± standard deviation) was performed under rest and stress conditions over 20-30 s to capture the aortic enhancement curves. From these curves, an optimal timing protocol was simulated, where one volume scan was acquired at the base of the aortic enhancement while a second volume scan was acquired at the peak of the aortic enhancement. Low-dose FPA perfusion measurements (P FPA ) were then derived and quantitatively compared to the previously validated retrospective FPA perfusion measurements as a reference standard (P REF ). The 32-cm diameter volume CT dose index, [Formula: see text] and size-specific dose estimate (SSDE) of the low-dose FPA perfusion protocol were also determined., Results: P FPA were related to the reference standard by P FPA  = 0.95 · P REF  + 0.07 (r = 0.94, root-mean-square error = 0.27 mL/min/g, root-mean-square deviation = 0.04 mL/min/g). The [Formula: see text] and SSDE of the low-dose FPA perfusion protocol were 9.2 mGy and 14.6 mGy, respectively., Conclusions: An optimal timing protocol for volume scan acquisition at the base and peak of the aortic enhancement was retrospectively validated and has the potential to be used to implement an accurate, low-dose, FPA perfusion technique.

We developed three-dimensionally (3D) printed patient-specific coronary phantoms that are capable of sustaining physiological flow and pressure conditions. We assessed the accuracy of these phantoms from coronary CT acquisition, benchtop experimentation, and CT-FFR software. Five patients with coronary artery disease underwent 320-detector row coronary CT angiography (CCTA) (Aquilion ONE, Canon Medical Systems) and a catheter lab procedure to measure fractional flow reserve (FFR). The aortic root and three main coronary arteries were segmented (Vitrea, Vital Images) and 3D printed (Eden 260V, Stratasys). Phantoms were connected into a pulsatile flow loop, which replicated physiological flow and pressure gradients. Contrast was introduced and the phantoms were scanned using the same CT scanner model and CCTA protocol as used for the patients. Image data from the phantoms were input to a CT-FFR research software (Canon Medical Systems) and compared to those derived from the clinical data, along with comparisons between image measurements and benchtop FFR results. Phantom diameter measurements were within 1 mm on average compared to patient measurements. Patient and phantom CT-FFR results had an absolute mean difference of 4.34% and Pearson correlation of 0.95. We have demonstrated the capabilities of 3D printed patient-specific phantoms in a diagnostic software.

Coronary computed tomography (CT) angiography is a noninvasive method for visualizing coronary artery disease. However, coronary CT angiography is limited in assessment of stenosis severity by the partial volume effect and calcification. Therefore, an accurate method for assessment of stenosis severity is needed. A 10 cm diameter cylindrical Lucite phantom with holes in the range of 0.4-4.5 mm diameter was fitted in a chest phantom. The holes were filled with an iodine solution of 8 mg/mL. To simulate coronary artery disease, different levels of stenosis were created by inserting Lucite rods into the holes with diameter range of 2-4.5 mm. The resulting lumen cross sectional areas ranged from 1.4 to 12.3 mm 2 . To simulate arterial calcification, calcium hydroxyapatite rods were inserted into the holes with diameter range of 2-4.5 mm. Images of the phantoms were acquired at 100 kVp using a 320-slice CT scanner. A maual and a semi-automated technique based on integrated Hounsfield units was used to calculate vessel cross-sectional area. There was an excellent correlation between the measured and the known cross-sectional area for both normal and stenotic vessels using the manual and the semi-automated techniques. However, the overall measurement error for the manual method was more than twice as compared with the integrated HU technique. Determination of vessel lumen area using the semi-automated integrated Hounsfield unit technique yields more than a factor of two improvement in precision and accuracy as compared to the existing manual technique for vessels with and without stenosis. This technique can also be used to accurately measure arterial cross-sectional area in the presence of coronary calcification.