Search

The main objective of this work was to evaluate a measure to decrease the excessive application of chemical fertili­zers and to increase the quality of medicinal and aromatic plants grown in Egypt. Basil is one of the most important medicinal plants which grows well under Egyptian conditions and plays a vital role for the export of the country. Two field experiments were conducted on the farm of the National Research Center in Giza during two successive seasons in 2003 and 2004. The treatments of the first experiment were 25, 50, 75 and 100% of the recommended NPK fertilization. In the second experiment different percentages of chemical and organic fertilizers (100% orga­nic, 100% chemical, 50 organic and 50 chemical, 25 organic and 75 chemical and 75 organic and 25 chemical) were applied. The investigation yielded the following main result: increasing NPK rates increased the growth and yield of Genovese basil but the application of only 50% from recommended NPK gave already about 80% of the yield of 100% recommended NPK. Compost as a source of nutrients gave similar yield but higher quality than fertilization with chemical NPK fertilizers alone.

Contamination of agricultural soil by heavy metals poses a significant threat to soil quality and crop yields. Using plants as a natural remediation approach attracts researchers' attention around the world. A 16-month pot experiment was conducted using Conocarpus erectus in a randomized complete block design. The growth, enzymatic activity, electrolyte leakage, and remediation potential were estimated under Cd nitrate]40 low (L), 60 medium (M), 80 high (H) mg/kg soil [and Pb nitrate]400 (L), 700 (M), 1,000 (H) mg/kg soil [applied individually and in combination. Conocarpus erectus demonstrated a good tolerance (over 70%) against lower and medium cadmium (Cd) and lead (Pb) levels and a medium resistance against high Cd and Pb levels, with a survival rate of 100% under all the treatments used. The most negative treatment on the growth traits and tolerance of C. erectus was (H) Cd and (H) Pb, which reduced plant height; chlorophyll index; dry weights of the leaves, stems, and roots; root length; and tolerance index of biomass and roots by 25.87%, 48.97%, 50.56%, 47.25%, 58.67%, 50.18%, 51.00%, and 50% in comparison to the respective control, consecutively. Relative to the control, all Cd and Pb applications increased polyphenol oxidase (PPO), peroxidase (POD), and catalase (CAT) activities, and the increment was parallel up to medium Cd and Pb levels and then decreased with their high levels but still higher than the control. Electrolyte leakage (EL) was upheaved by raising the levels of Cd and Pb, and it reached the maximum (52.79%) at the (H) Cd (H) Pb treatment. Cd and Pb in the leaves, stems, and roots were boosted by raising their levels in the treatments. Conocarpus erectus is considered a phytoextractor for the Cd levels used because the bioconcentration factor of the stem (BCFs) and the translocation factor (TF) of Cd were >1, and it is a suitable plant for Pb phytoextraction at (L) Pb, (M) Pb, and (M) Cd (M) Pb levels because its Pb BCFs and bioconcentration factor of the root (BCFr) were <1 and its Pb TF was >1. On the other hand, C. erectus is considered a phytostabilizator for Pb at (H) Pb, (L) Cd, (L) Pb, and (H) Cd (H) Pb levels because its Pb BCFs, BCFr, and TF were <1. [ABSTRACT FROM AUTHOR]

Aim: Calcium hydroxide (CH) has been considered as a direct pulp capping materials (DPC) for the last decades despite having some limitations. Phosphorylate pullulan (PPL) incorporated with CH (CHPPL) is a novel biomaterial that was introduced as a promising DPC material. Thus, the aim of the study was to evaluate the inflammatory response and mineralized tissue formation (MTF) ability of PPL‐based CH formulations on rat molars after DPC. Methodology: This study consisted of six groups: CH with 1% PPL (CHPPL‐1); 3% PPL (CHPPL‐3); 5% PPL (CHPPL‐5); Dycal and NEX MTA Cement (N‐MTA) as the positive control, and no capping materials (NC). One hundred twenty maxillary first molar cavities were prepared on Wistar rats. After capping, all the cavities were restored with 4‐META/MMA‐TBB resin and pulpal responses were evaluated at days 1, 7, and 28. Kruskal–Wallis followed by Mann–Whitney U‐test was performed with a significance level of 0.05. Immunohistochemical expression of IL‐6, Nestin, and DMP‐1 was observed. Results: At day 1, CHPPL‐1, N‐MTA, and Dycal exhibited no to mild inflammation, whilst CHPPL‐3, CHPPL‐5, and NC showed mild to moderate inflammation, and the results were significantly different (p <.05). At day 7, mild to moderate inflammation was observed in CHPPL‐1, N‐MTA, and Dycal, whereas CHPPL‐3, CHPPL‐5, and NC exhibited moderate to severe inflammation. Significant differences were observed between CHPPL‐1 and N‐MTA with NC (p <.05), CHPPL‐1 and CHPPL‐3 with CHPPL‐5 and Dycal (p <.05), and CHPPL‐3 with N‐MTA (p <.05). A thin layer of mineralized tissue formation (MTF) was observed in all groups. At day 28, CHPPL‐1, Dycal, and N‐MTA showed no to mild inflammation, whilst CHPPL‐3, CHPPL‐5, and NC exhibited mild to severe inflammation, and statistically significant difference was detected (p <.05). CHPPL‐1, Dycal, and N‐MTA exhibited continuous MTF, whilst CHPPL‐3, CHPPL‐5, and NC had thicker and interrupted MTF. Significant differences were observed between CHPPL‐1, CHPPL‐3, and N‐MTA with NC group (p <.05). Variable expressions of IL‐6, Nestin, and DMP‐1 indicated differences in the materials' impact on odontoblast‐like cell formation and tissue mineralization. Conclusions: These findings suggest that CHPPL‐1 has the potential to minimize pulpal inflammation and promote MTF and had similar efficacy as MTA cement. [ABSTRACT FROM AUTHOR]

MXene is a rapidly emerging group of two-dimensional (2D) multifunctional nanomaterials, drawing huge attention from researchers of a broad scientific field. Reporting the synthesis of MXene was the following breakthrough in 2D materials following the discovery of graphene. MXene is considered the most recent developments of materials, including transition metal carbonitrides, nitrides, and carbides synthesized by etching or mechanical-based exfoliation of selective MAX phases. MXene has a plethora of prodigious properties such as unique interlayer spacing, high ion and electron transport, large surface area, excellent thermal and electrical conductivity, exceptional volumetric capacitance, thermal shock, and oxidation resistance, easily machinable and inherently hydrophilic, and biocompatibility. Owing to the abundance of tailorable surface function groups, these properties can be further enhanced by surface functionalization with covalent and non-covalent modifications via numerous surface functionalization methods. Therefore, MXene finds their way to a plethora of applications in numerous fields including catalysis, membrane separation, energy storage, sensing, and biomedicine. Here, the focus is on reviewing the structure, synthesis techniques, and functionalization methods of MXene. Furthermore, MXene-based detection platforms in different sensing applications are survived. Great attention is given to reviewing the applications of MXene in the detection of biomolecules, pathogenic bacteria and viruses, cancer biomarkers food contaminants and mycotoxins, and hazardous pollutants. Lastly, the future perspective of MXene-based biosensors as a next-generation diagnostics tool is discussed. Crucial visions are introduced for materials science and sensing communities to better route while investigating the potential of MXene for creating innovative detection mechanisms. [ABSTRACT FROM AUTHOR]