Search

Mussel-inspired adhesive hydrogels represent innovative candidate medical sealants or glues. In the present work, we describe an enzyme-degradable mussel-inspired adhesive hydrogel formulation, achieved by incorporating minimal elastase substrate peptide Ala-Ala into the branched poly(ethylene glycol) (PEG) macromonomer structure. The system takes advantage of neutrophil elastase expression upregulation and secretion from neutrophils upon recruitment to wounded or inflamed tissue. By integrating adhesive degradation behaviors that respond to cellular cues, we expand the functional range of our mussel-inspired adhesive hydrogel platforms. Rapid (<1 min) and simultaneous gelation and adhesion of the proteolytically active, catechol-terminated precursor macromonomer was achieved by addition of sodium periodate oxidant. Rheological analysis and equilibrium swelling studies demonstrated that the hydrogel is appropriate for soft tissue-contacting applications. Notably, hydrogel storage modulus (G') achieved values on the order of 10 kPa, and strain at failure exceeded 200% strain. Lap shear testing confirmed the material's adhesive behavior (shear strength: 30.4 ± 3.39 kPa). Although adhesive hydrogel degradation was not observed during short-term (27 h) in vitro treatment with neutrophil elastase, in vivo degradation proceeded over several months following dorsal subcutaneous implantation in mice. This work represents the first example of an enzymatically degradable mussel-inspired adhesive and expands the potential biomedical applications of this family of materials.

A growing number of device-related nosocomial infections, elevated hospitalization costs, and patient morbidity necessitate the development of novel antibacterial strategies for clinical devices. We have previously demonstrated a simple, aqueous polydopamine dip-coating method to functionalize surfaces for a wide variety of uses. Here, we extend this strategy with the goal of imparting antifouling and antimicrobial properties to substrates, exploiting the ability of polydopamine to immobilize polymers and induce metal nanoparticle formation. Polydopamine was deposited as a thin adherent film of 4 nm thickness from alkaline aqueous solution onto polycarbonate substrates, followed by grafting of antifouling polymer polyethylene glycol and in situ deposition of silver nanoparticles onto the polydopamine coated polycarbonate substrates. Elemental and morphological surface analyses confirmed successful grafting of polyethylene glycol brushes onto polydopamine-coated substrates, as well as spontaneous silver nanoparticle formation for polydopamine-coated substrates incubated in silver-nitrate solutions. Sustained silver release was observed over at least 7 days from silver-coated substrates, and the release kinetics could be modulated via additional polydopamine overlayers. In vitro functional assays employing gram negative and positive strains demonstrated dual fouling resistance and antibacterial properties of the coatings due to the fouling resistance of grafted polyethylene glycol and antibacterial effect of silver, respectively. Polycarbonate substrates coated only with silver using a method similar to existing commercial coatings provided an antibacterial effect but failed to inhibit bacterial attachment. Taking into account the previously demonstrated substrate versatility of polydopamine coatings, our findings suggest that this strategy could be implemented on a variety of substrate materials to simultaneously improve antifouling and antimicrobial performance., (© 2011 American Chemical Society)

A novel cell-targeting, pH-sensitive polymeric carrier was employed in this study for delivery of the anticancer drug bortezomib (BTZ) to cancer cells. Our strategy is based on facile conjugation of BTZ to catechol-containing polymeric carriers that are designed to be taken up selectively by cancer cells through cell surface receptor-mediated mechanisms. The polymer used as a building block in this study was poly(ethylene glycol), which was chosen for its ability to reduce nonspecific interactions with proteins and cells. The catechol moiety was exploited for its ability to bind and release borate-containing therapeutics such as BTZ in a pH-dependent manner. In acidic environments, such as in cancer tissue or the subcellular endosome, BTZ dissociates from the polymer-bound catechol groups to liberate the free drug, which inhibits proteasome function. A cancer-cell-targeting ligand, biotin, was presented on the polymer carriers to facilitate targeted entry of drug-loaded polymer carriers into cancer cells. Our study demonstrated that the cancer-targeting drug-polymer conjugates dramatically enhanced cellular uptake, proteasome inhibition, and cytotoxicity toward breast carcinoma cells in comparison with nontargeting drug-polymer conjugates. The pH-sensitive catechol-boronate binding mechanism provides a chemoselective approach for controlling the release of BTZ in targeted cancer cells, establishing a concept that may be applied in the future toward other boronic acid-containing therapeutics to treat a broad range of diseases., (© 2011 American Chemical Society)

Mussels attach to solid surfaces in the sea. Their adhesion must be rapid, strong, and tough, or else they will be dislodged and dashed to pieces by the next incoming wave. Given the dearth of synthetic adhesives for wet polar surfaces, much effort has been directed to characterizing and mimicking essential features of the adhesive chemistry practiced by mussels. Studies of these organisms have uncovered important adaptive strategies that help to circumvent the high dielectric and solvation properties of water that typically frustrate adhesion. In a chemical vein, the adhesive proteins of mussels are heavily decorated with Dopa, a catecholic functionality. Various synthetic polymers have been functionalized with catechols to provide diverse adhesive, sealant, coating, and anchoring properties, particularly for critical biomedical applications.

Here we report the synthesis and characterization of pH-responsive, self-healing hydrogels based on boronate-catechol complexation.

Objective: Iatrogenic preterm premature rupture of membranes (iPPROM), the main complication of invasive interventions in the prenatal period, seriously limits the benefit of diagnostic or surgical prenatal procedures. This study aimed to evaluate preventive plugging of punctured fetal membranes in an ex vivo situation using a new mussel-mimetic tissue adhesive (mussel glue) to inhibit leakage., Methods: A novel biomechanical test device that tests the closure of injured membranes under near-physiological conditions was used. Mussel glue, a poly(ethylene glycol)-based hydrogel, was used to seal membrane defects of up to 3 mm in mechanically well-defined elastomeric membranes with three different degrees of stiffness., Results: Elastomeric test membranes were successfully employed for testing mussel glue under well-defined conditions. Mussel glue plugs were distended by up to 94%, which translated to an improved sealing efficiency on elastomeric membranes with high stiffness. For the stiffest membrane tested, a critical burst pressure of 48 mbar (36 mmHg) was accomplished in this ex vivo setting., Conclusions: Mussel glue appears to efficiently seal membrane defects under well-standardized ex vivo conditions. As repaired membranes resist pressures measured in amniotic cavities, mussel glue might represent a novel sealing method for iatrogenic membrane defects., (Copyright © 2011 John Wiley & Sons, Ltd.)

Background: Immobilization of lipase on appropriate solid supports is one way to improve their stability and activity, and can be reused for large scale applications. A sample, cost- effective and high loading capacity method is still challenging., Results: A facile method of lipase immobilization was developed in this study, by the use of polydopamine coated magnetic nanoparticles (PD-MNPs). Under optimal conditions, 73.9% of the available lipase was immobilized on PD-MNPs, yielding a lipase loading capacity as high as 429 mg/g. Enzyme assays revealed that lipase immobilized on PD-MNPs displayed enhanced pH and thermal stability compared to free lipase. Furthermore, lipase immobilized on PD-MNPs was easily isolated from the reaction medium by magnetic separation and retained more than 70% of initial activity after 21 repeated cycles of enzyme reaction followed by magnetic separation., Conclusions: Immobilization of enzyme onto magnetic iron oxide nanoparticles via poly-dopamine film is economical, facile and efficient.

A novel strategy was developed to synthesize polymer-coated metal nanoparticles (NPs) through reduction of metal cations with 3,4-dihydroxyphenylalanine (DOPA)-containing polyethylene glycol (PEG) polymers. Catechol redox chemistry was used to both synthesize metal NPs and simultaneously form a cross-linked shell of PEG polymers on their surfaces. DOPA reduced gold and silver cations into neutral metal atoms, producing reactive quinones that covalently cross-linked the PEG molecules around the surface of the NP. Importantly, these PEG-functionalized metal NPs were stable in physiological ionic strengths and under centrifugation, and hold broad appeal since they absorb and scatter light in aqueous solutions.

Growing evidence supports a critical role of metal-ligand coordination in many attributes of biological materials including adhesion, self-assembly, toughness, and hardness without mineralization [Rubin DJ, Miserez A, Waite JH (2010) Advances in Insect Physiology: Insect Integument and Color, eds Jérôme C, Stephen JS (Academic Press, London), pp 75-133]. Coordination between Fe and catechol ligands has recently been correlated to the hardness and high extensibility of the cuticle of mussel byssal threads and proposed to endow self-healing properties [Harrington MJ, Masic A, Holten-Andersen N, Waite JH, Fratzl P (2010) Science 328:216-220]. Inspired by the pH jump experienced by proteins during maturation of a mussel byssus secretion, we have developed a simple method to control catechol-Fe(3+) interpolymer cross-linking via pH. The resonance Raman signature of catechol-Fe(3+) cross-linked polymer gels at high pH was similar to that from native mussel thread cuticle and the gels displayed elastic moduli (G') that approach covalently cross-linked gels as well as self-healing properties.

A precise control of metallic-nanoparticle assembly is highly critical for the realization of tangible, high-performance devices or materials. Until recently, nanoparticle assembly using 1D templates had been limited to a narrow spectrum of nanoparticles as it was mostly dependent on the surface chemistry of the nanoparticles used. Inspired by the universal adhesive properties of mussels, we demonstrate a universal polymeric template for 1D assembly of various nanoparticles including, gold nanoparticles, iron oxide nanoparticles, and quantum dots. We find that the length of the 1D assembly is tunable using hyaluronic acid-graft-catechol templates with various contour lengths., (Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Early loss of proteoglycan 4 (PRG4), a lubricating glycoprotein implicated in boundary lubrication, from the cartilage surface has been associated with degeneration of cartilage and early onset of osteoarthritis. Viscosupplementation with hyaluronic acid and other macromolecules has been proposed as a treatment of osteoarthritis. However, the efficacy of viscosupplementation is variable and may be influenced by the short residence time of lubricant in the knee joint after injection. Recent studies have demonstrated the use of aldehyde (CHO) modified extracellular matrix proteins for targeted adherence to a biological tissue surface. It is hypothesized that CHO could be exploited to enhance the binding of lubricating proteoglycans to the surface of PRG4-depleted cartilage. The objective of this study was to determine the feasibility of molecular resurfacing of cartilage with CHO-modified PRG4. PRG4 was chemically functionalized with aldehyde (PRG4-CHO) and aldehyde plus Oregon Green (OG) fluorophore (PRG4-OG-CHO) to allow for differentiation of endogenous and exogenous PRG4. Cartilage disks depleted of native PRG4 were then treated with solutions of PRG4, PRG4-CHO, or PRG4-OG-CHO and then assayed for the presence of PRG4 by immunohistochemistry, ELISA, and fluorescence imaging. Repletion of cartilage surfaces was significantly enhanced with the inclusion of CHO compared with repletion with unmodified PRG4. These findings suggest a generalized approach which may be used for molecular resurfacing of tissue surfaces with PRG4 and other lubricating biomolecules, perhaps leading in the future to a convenient method for overcoming loss of lubrication during the early stages of osteoarthritis., (Published by Elsevier Ltd.)

Direct acetonide protection of the catechol of dopamine has proven to be problematic due to formation of Pictet-Spengler isoquinolines. Here we report an efficient method for acetonide protection of dopamine, allowing preparation of a dopamine prodrug without complications from the Pictet-Spengler reaction. Acetonide-protected dopamine was first synthesized by pre-protecting the amino group with phthaloyl followed by refluxing with 2,2-dimethoxypropane in the presence of TsOH. Further work demonstrated that Fmoc or trifluoroacetyl were also suitable N-protective groups, while Boc-protected dopamine gave an isoquinoline product. Acetonide-protected dopamine was coupled to DHA (all cis-4,7,10,13,16,19-docosahexaenoic acid) to produce the N-DHA-dopamine prodrug in high purity.

Tissue engineering scaffolds capable of gene delivery can provide a structure that supports tissue formation while also inducing the expression of inductive factors. Sustained release strategies are hypothesized to maintain elevated plasmid concentrations locally that can enhance gene transfer. In this report, we investigate the relationship between plasmid release kinetics and the extent and duration of transgene expression. Scaffolds were fabricated from polymer microspheres modified with cationic polymers (polyethylenimine, poly(L-lysine), poly(allylamine hydrochloride), polydiallyldimethylammonium) or polydopamine (PD), with PD enhancing incorporation and slowing release. In vivo implantation of scaffolds into the peritoneal fat pad had no significant changes in the level and duration of transgene expression between PD and unmodified scaffolds. Control studies with plasmid dried onto scaffolds, which exhibited a rapid release, and scaffolds with extended leaching to reduce initial quantities released had similar levels and duration of expression. Changing the plasmid design, from a cytomegalovirus (CMV) to an ubiquitin C (UbC) promoter substantially altered the duration of expression. These studies suggest that the initial dose released and vector design affect the extent and duration of transgene expression, which may be sustained over several weeks, potentially leading to numerous applications in cell transplantation and regenerative medicine., ((c) 2009 Elsevier Ltd. All rights reserved.)

Pancreatic islet encapsulation within semi-permeable materials has been proposed for transplantation therapy of type I diabetes mellitus. Polymer hydrogel networks used for this purpose have been shown to provide protection from islet destruction by immunoreactive cells and antibodies. However, one of the fundamental deficiencies with current encapsulation methods is that the permselective barriers cannot protect islets from cytotoxic molecules of low molecular weight that are diffusible into the capsule material, which subsequently results in beta-cell destruction. Use of materials that can locally inhibit the interaction between the permeable small cytotoxic factors and islet cells may prolong the viability and function of encapsulated islet grafts. Here we report the design of anti-inflammatory hydrogels supporting islet cell survival in the presence of diffusible pro-inflammatory cytokines. We demonstrated that a poly(ethylene glycol)-containing hydrogel network, formed by native chemical ligation and presenting an inhibitory peptide for islet cell surface IL-1 receptor, was able to maintain the viability of encapsulated islet cells in the presence of a combination of cytokines including IL-1 beta, TNF-alpha, and INF-gamma. In stark contrast, cells encapsulated in unmodified hydrogels were mostly destroyed by cytokines which diffused into the capsules. At the same time, these peptide-modified hydrogels were able to efficiently protect encapsulated cells against beta-cell specific T-lymphocytes and maintain glucose-stimulated insulin release by islet cells. With further development, the approach of encapsulating cells and tissues within hydrogels presenting anti-inflammatory agents may represent a new strategy to improve cell and tissue graft function in transplantation and tissue engineering applications.

There is significant need for effective medical adhesives that function reliably on wet tissue surfaces with minimal inflammatory insult. To address these performance characteristics, we have generated a synthetic adhesive biomaterial inspired by the protein glues of marine mussels. In-vivo performance was interrogated in a murine model of extrahepatic syngeneic islet transplantation, as an alternative to standard portal administration. The adhesive precursor polymer consisted of a branched poly(ethylene glycol) (PEG) core, whose endgroups were derivatized with catechol, a functional group abundant in mussel adhesive proteins. Under oxidizing conditions, adhesive hydrogels formed in less than 1 min from catechol-derivatized PEG (cPEG) solutions. Upon implantation, the cPEG adhesive elicited minimal acute or chronic inflammatory response in C57BL6 mice, and maintained an intact interface with supporting tissue for up to one year. In-situ cPEG adhesive formation was shown to efficiently immobilize transplanted islets at the epididymal fat pad and external liver surfaces, permitting normoglycemic recovery and graft revascularization. These findings establish the use of synthetic, biologically-inspired adhesives for islet transplantation at extrahepatic sites.

Objective: This study was undertaken to test injectable surgical sealants that are biocompatible with fetal membranes and that are to be used eventually for the closure of iatrogenic membrane defects., Study Design: Dermabond (Ethicon Inc, Norderstedt, Germany), Histoacryl (B. Braun GmbH, Tuttlingen, Germany), and Tissucol (Baxter AG, Volketwil, Switzerland) fibrin glue, and 3 types of in situ forming poly(ethylene glycol)-based polymer hydrogels were tested for acute toxicity on direct contact with fetal membranes for 24 hours. For the determination of elution toxicity, extracts of sealants were incubated on amnion cell cultures for 72 hours. Bonding and toxicity was assessed through morphologic and/or biochemical analysis., Results: Extracts of all adhesives were nontoxic for cultured cells. However, only Tissucol and 1 type of poly(ethylene glycol)-based hydrogel, which is a mussel-mimetic tissue adhesive, showed efficient, nondisruptive, nontoxic bonding to fetal membranes. Mussel-mimetic tissue adhesive that was applied over membrane defects that were created with a 3.5-mm trocar accomplished leak-proof closure that withstood membrane stretch in an in vitro model., Conclusion: A synthetic hydrogel-type tissue adhesive that merits further evaluation in vivo emerged as a potential sealing modality for iatrogenic membrane defects., (2010 Mosby, Inc.)

A facile approach for material-independent surface modification using norepinephrine was investigated. pH-induced oxidative polymerization of norepinephrine forms adherent films on vastly different types of material surfaces of noble metals, metal oxides, semiconductors, ceramics, shape-memory alloys, and synthetic polymers. Secondary biochemical functionalizations such as immobilization of proteins and growth of biodegradable polyester on the poly(norepinephrine) films were demonstrated.

This paper quantifies how the quality of dispersion and the quality of the interfacial interaction between TiO(2) nanoparticles and host polymer independently affect benchmark properties such as glass transition temperature (Tg), elastic modulus and loss modulus. By examining these composites with differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM), we were able to demonstrate changes in properties depending on the adhesive/wetting or repulsive/dewetting interactions the nanoparticles have with the bulk polymer. We further quantified the dispersion of TiO(2) nanoparticles in polymethylmethacrylate (PMMA) matrices by a digital-optical method and correlated those values to the degree of Tg depression compared to neat PMMA. Samples with the same weight percent of nanoparticles but better dispersion showed larger shifts in Tg.

Aqueous biocompatible tribosystems are desirable for a variety of tissue-contacting medical devices. L-3,4-dihydroxyphenylalanine (DOPA) and lysine (K) peptide mimics of mussel adhesive proteins strongly interact with surfaces and may be useful for surface attachment of lubricating polymers in tribosystems. Here, we describe a significant improvement in lubrication properties of poly (dimethylsiloxane) (PDMS) surfaces when modified with PEG-DOPA-K. Surfaces were characterized by optical and atomic force microscopy, contact angle, PM-IRRAS, and X-ray photoelectron spectroscopy. Such surfaces, tested over the course of 200 rotations ( approximately 8 m in length), maintained an extremely low friction coefficient (mu) (0.03 +/- 0.00) compared to bare PDMS (0.98 +/- 0.02). These results indicate the potential applications of PEG-DOPA-K for the modification of device surfaces. Extremely low mu values were maintained over relatively long length scales and a range of sliding speeds without the need for substrate pre-activation and in the absence of excess polymer in aqueous solution. These results were only obtained when DOPA was bound to lysine (modification with PEG-DOPA did not have an effect on mu) suggesting the critical role of lysine in obtaining a lowered friction coefficient.

We describe the use of native chemical ligation (NCL) reaction to covalently cross-link soluble polymers into hydrogels. Macromonomers consisting of a four-armed poly(ethylene glycol) (PEG) core end-functionalized with either thioester or N-terminal cysteine peptide were designed and synthesized. Upon mixing aqueous solutions of the thioester and N-terminal cysteine macromonomers, rigid hydrogels formed within minutes. The gelation time was affected by choice of buffer, pH, polymer concentration, reaction temperature, and chemical composition of the N-terminal cysteine conjugate. The kinetics of gel formation and the viscoelastic behavior of selected hydrogels were further studied by oscillatory rheology, which demonstrated a minimum gel formation time of approximately two minutes and the formation of an elastic cross-linked hydrogel via the NCL reaction. A useful feature of this hydrogel strategy is the regeneration of thiol functional groups as a result of the NCL reaction, thereby allowing functionalization of the polymer hydrogel with biomolecules. This was demonstrated by conjugation of a maleimide-GRGDSPG-NH(2) peptide to an NCL hydrogel, permitting the attachment of human mesenchymal stem cells (hMSCs) on the hydrogel. Due to the mild reaction conditions, chemoselectivity, and potential for biological functionalization, our approach may prove useful as a general method for hydrogel formation, including hydrogels intended for biomedical applications.

Numerous strategies exist to prevent biological fouling of surfaces in physiological environments; our strategy focuses on the modification of surfaces with poly-N-substituted glycine oligomers (polypeptoids). We previously reported the synthesis and characterization of three novel polypeptoid polymers that can be used to modify titanium oxide surfaces, rendering the surfaces resistant to adsorption of proteins, to adhesion of mammalian and bacterial cells and to degradation by common protease enzymes. In this study, we investigated the effect of polypeptoid chain length on the antifouling properties of the modified surfaces. For these experiments we used poly(N-methoxyethyl) glycines with lengths between ten and fifty repeat units and determined the influence of chain length on coating thickness and density as well as resistance to protein adsorption and cellular adhesion. Short-term protein resistance remained low for all polymers, as measured by optical waveguide lightmode spectroscopy, while fibroblast adhesion after several weeks indicated reduced fouling resistance for the polypeptoid-modified surfaces with the shortest chain length polymer. Experimental observations were compared to predictions obtained from a molecular theory of polymer and protein adsorption. Good agreement was found between experiment and theory for the chain length dependence of peptoid grafting density, and for protein adsorption as a function of peptoid grafting density. The theoretical predictions provide specific guidelines for the surface coverage for each molecular weight for optimal antifouling. The predictions show the relationship between polymer layer structure and fouling.

Mimicking the in vivo stem cell niche to increase stem cell expansion will likely require the presentation of multiple ligands. Presenting ligands in fluid-supported lipid monolayers (SLMs) or bilayers (SLBs) allows for ligand diffusion to complement the arrangement of cell receptors as well as cell-mediated ligand rearrangement and clustering. Cells in tissues interact with ligands presented by other cells and the extracellular matrix (ECM), so it will likely be beneficial to present both cell-associated and ECM-derived ligands. A number of investigators have incorporated cell-membrane-associated ligands within fluid surfaces, and several groups have shown that these ligands cluster beneath the cells. However, few studies have investigated cell adhesion to ECM-derived ligands in fluid surfaces. Fibronectin is an important ECM component in many tissues, including the hematopoietic stem cell niche. We examined the adhesion of the M07e and THP-1 hematopoietic progenitor cell lines to fibronectin-derived peptide ligands for the alpha5beta1 (cyclic and linear RGD) and alpha4beta1 (cyclic LDV) integrins as well as the heparin-binding domain (HBD) presented as lipopeptides in fluid and gel SLMs. M07e cells adhered more avidly than THP-1 cells to all of the lipopeptides in fluid and gel surfaces. The adhesion of both cell lines to all peptides was less avid in fluid versus gel SLMs. Adhesion to cyclic LDV (cLDV) and cRGD was similar on gel SLMs for both cell lines. In contrast, adhesion to cLDV was less extensive than to cRGD in fluid SLMs, especially for M07e cells. Adhesion to linear RGD was less avid than to cRGD or cLDV and decreased to a greater extent in fluid SLMs. Human aortic endothelial cells adhered to cRGD in fluid SLMs and remained viable for at least 24 h but did not spread. We also showed additive THP-1 cell adhesion to cLDV and linear RGD lipopeptides presented in a fluid SLM. Although DOPC (dioleoyl phosphatidyl choline) SLMs are not sufficiently stable for long-term cell culture studies, our results and those of others suggest that fluid SLMs are likely to be useful for presenting multiple ligands and for mimicking short-term interactions in the stem cell niche.

The adhesive proteins secreted by marine mussels form a natural glue that cures rapidly to form strong and durable bonds in aqueous environments. These mussel adhesive proteins contain an unusual amino acid, 3,4-dihydroxy-L-phenylalanine (DOPA), which is largely responsible for their cohesive and adhesive strengths. In this study, we incorporated DOPA into diblock and triblock polymers and developed a membrane contact experiment to assess the adhesive interactions of these materials with TiO(2) and tissue surfaces. In a typical experiment a micrometer-thick DOPA-functionalized elastomeric membrane is attached to the end of a cylindrical glass tube. Application of a positive pressure to the tube brings the membrane into contact with the surface of interest. The negative pressure needed to separate the membrane from the substrate is a measure of the strength of the adhesive interaction. The test confirms previous results obtained with TiO(2) substrates. Because the membrane geometry is well suited for rough or chemically heterogeneous surfaces, it is ideal for studies of tissue adhesion. DOPA was found to give strong adhesion to tissue surfaces, with the strongest adhesion obtained when the DOPA groups were oxidized while in contact with the tissue surface.

We report a facile approach to the synthesis of acetonide and Fmoc protected 3,4-dihydroxyphenylalanine (DOPA), Fmoc-DOPA(acetonide)-OH. By protecting the amino group of DOPA with a phthaloyl group and the carboxyl group as a methyl ester, acetonide protection of the catechol of DOPA derivative was realized in the presence of p-toluenesulfonic acid. Following removal of protecting groups, the intermediate was converted to Fmoc-DOPA(acetonide)-OH, which was successfully incorporated into a short DOPA-containing peptide, derived from marine tubeworm cement proteins Pc1 and Pc2.

The macroscale properties of polymer-matrix composites depend immensely on the quality of the interaction between the reinforcement phase and the bulk polymer. This work presents a method to improve the interfacial adhesion between metal-oxides and a polymer matrix by performing surface-initiated polymerization (SIP) by way of a biomimetic initiator. The initiator was modeled after 3,4-dihydroxy-L-phenylalanine (dopa), an amino acid that is highly concentrated in mussel foot adhesive proteins. Mechanical pull out tests of NiTi and Ti-6Al-4V wires from poly (methyl methacrylate) (PMMA) were performed to directly test the interfacial adhesion. These tests demonstrated improvements in maximum interfacial shear stress of 116% for SIP-modified NiTi wires and 60% for SIP-modified Ti-6Al-4V wires over unmodified specimens. Polymer chain growth from the metal oxides was validated using x-ray photoemission spectroscopy (XPS), ellipsometry, scanning electron microscopy (SEM), and contact angle analysis.

Peptidomimetic polymers consisting of poly-N-substituted glycine oligomers (polypeptoids) conjugated to biomimetic adhesive polypeptides were investigated as antifouling surface coatings. The polymers were immobilized onto TiO(2) surfaces via an anchoring peptide consisting of alternating residues of 3,4-dihydroxyphenylalanine (DOPA) and lysine. Three polypeptoid side-chain compositions were investigated for antifouling performance and stability toward enzymatic degradation. Ellipsometry and XPS analysis confirmed that purified polymers adsorbed strongly to TiO(2) surfaces, and the immobilized polymers were resistant to enzymatic degradation as demonstrated by mass spectrometry. All polypeptoid-modified surfaces exhibited significant reductions in adsorption of lysozyme, fibrinogen and serum proteins, and were resistant to 3T3 fibroblast cell attachment for up to seven days. Long-term in vitro cell attachment studies conducted for six weeks revealed the importance of polypeptoid side-chain composition, with a methoxyethyl side chain providing superior long-term fouling resistance compared to hydroxyethyl and hydroxypropyl side chains. Finally, attachment of both gram-positive and gram-negative bacteria for up to four days under continuous-flow conditions was significantly reduced on the polypeptoid-modified surfaces compared to unmodified TiO(2) surfaces. The results reveal the influence of polypeptoid side-chain chemistry on short-term and long-term protein, cell and bacterial fouling resistance.

Surface modification techniques that create surfaces capable of killing adherent bacteria are promising solutions to infections associated with implantable medical devices. Antimicrobial (AM) peptoid oligomers (ampetoids) that were designed to mimic helical AM peptides were synthesised with a peptoid spacer chain to allow mobility and an adhesive peptide moiety for easy and robust immobilisation onto substrata. TiO(2) substrata were modified with the ampetoids and subsequently backfilled with an antifouling (AF) polypeptoid polymer in order to create polymer surface coatings composed of both AM (active) and AF (passive) peptoid functionalities. Confocal microscopy images showed that the membranes of adherent E. coli cells were damaged after 2-h exposure to the modified substrata, suggesting that ampetoids retain AM properties even when immobilised on substrata.

Marine mussels anchor to a variety of surfaces by secreting liquid proteins that harden and form water-resistant bonds to a variety of surfaces. Studies have revealed that these mussel adhesive proteins contain an unusual amino acid, 3,4-dihydroxy-L-phenylalanine (DOPA), which is believed to be responsible for the cohesive and adhesive properties of these proteins. To separate the cohesive and adhesive roles of DOPA, we incorporated DOPA into the midblock of poly(methyl methacrylate)-poly(methacrylic acid)-poly(methyl methacrylate) (PMMA-PMAA-PMMA) triblock copolymers. Self-assembled hydrogels were obtained by exposing triblock copolymer solutions in dimethyl sulfoxide to water vapor. As water diffused into the solution, the hydrophobic end blocks formed aggregates that were bridged by the water-soluble midblocks. Strong hydrogels were formed with polymer weight fractions between 0.01 and 0.4 and with shear moduli between 1 and 5 kPa. The adhesive properties of the hydrogels on TiO2 surfaces were investigated by indentation with a flat-ended cylindrical punch. At pH values of 6 and 7.4, the fully protonated DOPA groups were highly adhesive to the TiO2 surfaces, giving values of approximately equal to 2 J/m2 for the interfacial fracture energy, which we believe corresponds to the cohesive fracture energy of the hydrogel. At these pH values, the DOPA groups are hydrophobic and have a tendency to aggregate, so contact times of 10 or 20 min are required for these high values of the interfacial strength to be observed. At a pH of 10, the DOPA groups were hydrophilic and highly swellable, but less adhesive gels were formed. Oxidation of DOPA groups, a process that is greatly accelerated at a pH of 10, decreased the adhesive performance of the hydrogels even further.

Covalent attachment of synthetic and biological molecules to tissue surfaces can be used to enhance local drug delivery, reduce adhesions after surgery, and attach reconstructive biomaterials and tissue-engineered matrices to tissues. We present here a mild approach to coupling polymers to tissue surfaces through an enzyme catalyzed reaction between peptide modified polymer and native protein components of the tissue extracellular matrix (ECM). Tissue transglutaminase (tTG), a Ca2+-dependent enzyme that catalyzes the reaction between lysine and glutamine residues to form a epsilon(gamma-glutaminyl) lysine isopeptide bond, was incubated with cartilage in the presence of lysine (FKG-NH2) and glutamine (GQQQLG-NH2) peptides as well as peptide functionalized poly(ethylene glycol) (PEG). Immunohistochemistry was used to detect the presence of covalently bound PEG polymer at the tissue surface as well as to a depth of as much as 10 microm below the surface. Collagen II, fibronectin, osteopontin and osteonectin were found to react with the peptides and peptide modified PEG in the presence of tTG in solution, suggesting these cartilage ECM components as being substrates in the tissue reaction. The results illustrate the use of tTG as a simple, effective and biologically compatible method of coupling synthetic and biological molecules to cartilage and other tissues containing ECM proteins that are substrates of tTG.

Marine and freshwater mussels are notorious foulers of natural and manmade surfaces, secreting specialized protein adhesives for rapid and durable attachment to wet substrates. Given the strong and water-resistant nature of mussel adhesive proteins, significant potential exists for mimicking their adhesive characteristics in bioinspired synthetic polymer materials. An important component of these proteins is L-3,4-dihydroxylphenylalanine (DOPA), an amino acid believed to contribute to mussel glue solidification through oxidation and crosslinking reactions. Synthetic polymers containing DOPA residues have previously been shown to crosslink into hydrogels upon the introduction of oxidizing reagents. Here we introduce a strategy for stimuli responsive gel formation of mussel adhesive protein mimetic polymers. Lipid vesicles with a bilayer melting transition of 37 degrees C were designed from a mixture of dipalmitoyl and dimyristoyl phosphatidylcholines and exploited for the release of a sequestered oxidizing reagent upon heating from ambient to physiologic temperature. Colorimetric studies indicated that sodium-periodate-loaded liposomes released their cargo at the phase transition temperature, and when used in conjunction with a DOPA-functionalized poly(ethylene glycol) polymer gave rise to rapid solidification of a crosslinked polymer hydrogel. The tissue adhesive properties of this biomimetic system were determined by in situ thermal gelation of liposome/polymer hydrogel between two porcine dermal tissue surfaces. Bond strength measurements showed that the bond formed by the adhesive hydrogel (mean = 35.1 kPa, SD = 12.5 kPa, n = 11) was several times stronger than a fibrin glue control tested under the same conditions. The results suggest a possible use of this biomimetic strategy for repair of soft tissues.

We report a method to form multifunctional polymer coatings through simple dip-coating of objects in an aqueous solution of dopamine. Inspired by the composition of adhesive proteins in mussels, we used dopamine self-polymerization to form thin, surface-adherent polydopamine films onto a wide range of inorganic and organic materials, including noble metals, oxides, polymers, semiconductors, and ceramics. Secondary reactions can be used to create a variety of ad-layers, including self-assembled monolayers through deposition of long-chain molecular building blocks, metal films by electroless metallization, and bioinert and bioactive surfaces via grafting of macromolecules.

We have developed surfaces for the selective presentation of biotinylated peptides and proteins in a background that resists nonspecific protein adsorption; controlled amounts of biotinylated poly(ethylene glycol) (MW 3400 Da; PEG3400) anchored to titanium-dioxide-coated surfaces via an adhesive tri-peptide sequence of L-3,4-dihydroxyphenylalanine (DOPA3-PEG3400-biotin; DPB) were incorporated within a DOPA3-PEG2000 background. Using optical waveguide lightmode spectroscopy, we found that the amounts of sequentially adsorbed NeutrAvidin and singly biotinylated molecules increased proportionally with the amount of DPB in the surface. Biotinylated peptides (MW approximately 2000 Da) were able to fill all three of the remaining avidin-binding sites, while only one molecule of biotinylated PEG5000 or stem cell factor bound to each avidin. The resulting biotin-avidin-biotin linkages were stable for prolonged periods under continuous perfusion, even in the presence of excess free biotin. Hematopoietic M07e cells bound to immobilized peptide ligands for alpha5beta1 (cyclic RGD) and alpha4beta1 (cylic LDV) integrins in a DPB-dose-dependent manner, with near-maximal binding to cylic LDV for surfaces containing 1% DPB. Multiple ligands were adsorbed in a controlled manner by incubating NeutrAvidin with the respective ligands in the desired molar ratio and then adding the resulting complexes to DPB-containing surfaces. Cell adhesion to surfaces containing both cylic LDV and cyclic RGD increased in an additive manner compared to that for the individual ligands. The bioactivity of adsorbed biotinylated stem cell factor was retained, as demonstrated by DPB-dose-dependent M07e cell adhesion and ERK1/2 activation.

We describe a new method for encoded synthesis, efficient on-resin screening, and rapid unambiguous sequencing of combinatorial peptide libraries. An improved binary tag system for encoding peptide libraries during synthesis was designed to facilitate unequivocal assignment of isobaric residues by MALDI-TOF MS analysis. The improved method for encoded library synthesis was combined with a new versatile on-resin screening strategy that permitted multiple stages and types of screening to be employed successively on one library under mild conditions. The new method facilitated a combinatorial study of transglutaminase (TGase) enzyme substrate peptides, revealing new details of the effect of amino acid composition on TGase substrates. The approach was first demonstrated for an encoded library (130,321 compounds) of lysine pentapeptide substrates of TGase, synthesized using the "split-mix" method. The library was reacted on-resin with TGase enzyme and a soluble desthiobiotin labeled glutamine substrate. Initial screening was performed by adsorbing streptavidin-coated magnetic microparticles onto library beads, followed by magnetic separation. The differential binding affinities of desthiobiotin and biotin for streptavidin were exploited to release the magnetic microparticles and regenerate the desthiobiotin-labeled resin beads for further screening by flow-cytometry-based automated bead sorting, resulting in 345 beads that were sequenced by MALDI-TOF MS analysis. A second library consisted of encoded glutamine hexapeptide substrates, which was reacted on-resin with TGase enzyme and a soluble desthiobiotin-labeled cadaverine. Two-stage screening identified 267 glutamine peptides as TGase-reactive, of which 21 were further analyzed by solution-phase enzyme kinetics. Kinetic results indicated that the peptide PQQQYV from the library has a 68-fold greater substrate specificity than the best known glutamine substrate QQIV. The new encoding and screening strategies described here are expected to be broadly applicable to synthesis and screening of combinatorial peptide libraries in the future.

The adhesive strategy of the gecko relies on foot pads composed of specialized keratinous foot-hairs called setae, which are subdivided into terminal spatulae of approximately 200 nm (ref. 1). Contact between the gecko foot and an opposing surface generates adhesive forces that are sufficient to allow the gecko to cling onto vertical and even inverted surfaces. Although strong, the adhesion is temporary, permitting rapid detachment and reattachment of the gecko foot during locomotion. Researchers have attempted to capture these properties of gecko adhesive in synthetic mimics with nanoscale surface features reminiscent of setae; however, maintenance of adhesive performance over many cycles has been elusive, and gecko adhesion is greatly diminished upon full immersion in water. Here we report a hybrid biologically inspired adhesive consisting of an array of nanofabricated polymer pillars coated with a thin layer of a synthetic polymer that mimics the wet adhesive proteins found in mussel holdfasts. Wet adhesion of the nanostructured polymer pillar arrays increased nearly 15-fold when coated with mussel-mimetic polymer. The system maintains its adhesive performance for over a thousand contact cycles in both dry and wet environments. This hybrid adhesive, which combines the salient design elements of both gecko and mussel adhesives, should be useful for reversible attachment to a variety of surfaces in any environment.

Poly(ethylene glycol) (PEG) is widely used in the pharmaceutical, biotechnology, and medical device industries. Although PEG is a biocompatible polymer that has enjoyed widespread use in drug delivery technology, it is not considered adhesive toward mucosal tissue. Here the authors describe a simple approach to enhancing mucoadsorption of PEG polymers through end group functionalization with the amino acid 3,4-dihydroxyphenyl-L-alanine (DOPA). Using a variety of surface analytical techniques, the authors show that a four-armed poly(ethylene glycol) polymer functionalized with a single DOPA residue at the terminus of each arm (PEG-(DOPA)(4)) adsorbed strongly to surface immobilized mucin. Successful mucoadsorption of PEG-(DOPA)(4) across several pH values ranging from 4.5 to 8.5 was demonstrated, and control experiments with unfunctionalized four-arm PEG demonstrated that mucoadsorption of PEG-(DOPA)(4) is due largely to the presence of DOPA end groups. This conclusion was confirmed with single molecule atomic force microscopy experiments that revealed a surprisingly strong interaction force of 371+/-93 pN between DOPA and adsorbed mucin. Direct comparisons with known mucoadhesive polymers revealed that PEG-(DOPA)(4) was equal to or more adsorptive to immobilized mucin than these existing mucoadhesive polymers. In addition to demonstrating significant enhancement of mucoadhesive properties of PEG by DOPA functionalization, this study also introduced a new simple approach for rapid screening of mucoadhesive polymers.

The glue proteins secreted by marine mussels bind strongly to virtually all inorganic and organic surfaces in aqueous environments in which most adhesives function poorly. Studies of these functionally unique proteins have revealed the presence of the unusual amino acid 3,4-dihydroxy-L-phenylalanine (dopa), which is formed by posttranslational modification of tyrosine. However, the detailed binding mechanisms of dopa remain unknown, and the chemical basis for mussels' ability to adhere to both inorganic and organic surfaces has never been fully explained. Herein, we report a single-molecule study of the substrate and oxidation-dependent adhesive properties of dopa. Atomic force microscopy (AFM) measurements of a single dopa residue contacting a wet metal oxide surface reveal a surprisingly high strength yet fully reversible, noncovalent interaction. The magnitude of the bond dissociation energy as well as the inability to observe this interaction with tyrosine suggests that dopa is critical to adhesion and that the binding mechanism is not hydrogen bond formation. Oxidation of dopa, as occurs during curing of the secreted mussel glue, dramatically reduces the strength of the interaction to metal oxide but results in high strength irreversible covalent bond formation to an organic surface. A new picture of the interfacial adhesive role of dopa emerges from these studies, in which dopa exploits a remarkable combination of high strength and chemical multifunctionality to accomplish adhesion to substrates of widely varying composition from organic to metallic.

This paper presents a comparative study on the antifouling properties of poly(ethylene glycol) (PEG)-based polymer coatings prepared by surface-initiated polymerization (SIP). Three types of poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMEMA) polymer thin films of approximate 100 nm thickness were grafted from a catechol initiator that was immobilized on a Ti substrate. OEGMEMA monomers containing side chains of 4, 9, and 23 EG units were used in surface-initiated atom transfer radical polymerization (SI-ATRP) to form POEGMEMA-4, -9, and -23 polymer brushes. The chemical composition, thickness, and wettability of the polymer brushes were characterized by X-ray photoelectron spectroscopy (XPS), ellipsometry, and static water contact angle measurements, respectively. The dependence of antifouling performance on EG side chain length was systemically tested and compared by 3T3 fibroblast cell adhesion assays. Results from 4-h cell culture experiments revealed the complete absence of cell attachment on all the grafted Ti substrates. Excellent cell fouling resistance continued with little dependence on EG side chain length up to three weeks, after which long-term antifouling performance depended on the EG chain length as the grafted samples reached confluent cell coverage in 7, 10, and 11 weeks for POEGMEMA-4, -9, and -23, respectively.

Spreading of liquids and soft solids on a rigid surface in a surrounding liquid medium is investigated by utilizing the lateral sensitivity of the quartz crystal microbalance (QCM). While the QCM has been used extensively to study systems with spatial variations in the direction normal to the crystal's electrodes, few studies have exploited the QCM's ability to sense changes in loading in the plane of the electrodes. We propose equations to describe the predicted response of the QCM to a generalized viscoelastic material spreading at the QCM surface at the expense of the surrounding liquid medium. Several experimental examples are given in order to support the validity of the proposed equations, including situations where the spreading material is a Newtonian liquid, a viscoelastic liquid, or one of two viscoelastic solids. The first viscoelastic solid is a physically cross-linked gel based on a styrene/ethylene-butene/styrene triblock copolymer in mineral oil, and the second is a cross-linked poly(ethylene glycol) hydrogel.

The marine antifouling and fouling-release performance of titanium surfaces coated with a bio-inspired polymer was investigated. The polymer consisted of methoxy-terminated poly(ethylene glycol) (mPEG) conjugated to the adhesive amino acid l-3,4-dihydroxyphenylalanine (DOPA) and was chosen based on its successful resistance to protein and mammalian cell fouling. Biofouling assays for the settlement and release of the diatom Navicula perminuta and settlement, growth and release of zoospores and sporelings (young plants) of the green alga Ulva linza were carried out. Results were compared to glass, a poly(dimethylsiloxane) elastomer (Silastic T2) and uncoated Ti. The mPEG-DOPA3 modified Ti surfaces exhibited a substantial decrease in attachment of both cells of N. perminuta and zoospores of U. linza as well as the highest detachment of attached cells under flow compared to control surfaces. The superior performance of this polymer over a standard silicone fouling-release coating in diatom assays and approximately equivalent performance in zoospore assays suggests that this bio-inspired polymer may be effective in marine antifouling and fouling-release applications.

In this paper, we demonstrate the first use of a catecholic initiator for surface-initiated polymerization (SIP) from metal surfaces to create antifouling polymer coatings. A new bifunctional initiator inspired by mussel adhesive proteins was synthesized, which strongly adsorbs to Ti and 316L stainless steel (SS) substrates, providing an anchor for surface immobilization of grafted polymers. Surface-initiated atom transfer radical polymerization (SI-ATRP) was performed through the adsorbed biomimetic initiator to polymerize methyl methacrylate macromonomers with oligo(ethylene glycol) (OEG) side chains. X-ray photoelectron spectroscopy, surface FT-IR, and contact angle analysis confirmed the sequential grafting of initiator and polymer, and ellipsometry indicated the formation of polymer coatings of up to 100 nm thickness. Cell adhesion experiments performed with 3T3-Swiss albino fibroblasts showed substantially reduced cell adhesion onto polymer grafted Ti and 316L SS substrates as compared to the unmodified metals. Moreover, micropatterning of grafted polymer coatings on Ti surfaces was demonstrated by combining SI-ATRP and molecular assembly patterning by lift-off (MAPL), creating cell-adhesive and cell-resistant regions for potential use as cell arrays. Due to the ability of catechols to bind to a large variety of inorganic surfaces, this biomimetic anchoring strategy is expected to be a highly versatile tool for polymer thin film surface modification for biomedical and other applications.

Exposure of therapeutic and diagnostic medical devices to biological fluids is often accompanied by interfacial adsorption of proteins, cells, and microorganisms. Biofouling of surfaces can lead to compromised device performance or increased cost and in some cases may be life-threatening to the patient. Although numerous antifouling polymer coatings have enjoyed short-term success in preventing protein and cell adsorption on surfaces, none have proven ideal for conferring long-term biofouling resistance. Here we describe a new biomimetic antifouling N-substituted glycine polymer (peptoid) containing a C-terminal peptide anchor derived from residues found in mussel adhesive proteins for robust attachment of the polymer onto surfaces. The methoxyethyl side chain of the peptoid portion of the polymer was chosen for its chemical resemblance to the repeat unit of the known antifouling polymer poly(ethylene glycol) (PEG), whereas the composition of the 5-mer anchoring peptide was chosen to directly mimic the DOPA- and Lys-rich sequence of a known mussel adhesive protein. Surfaces modified with this biomimetic peptide-peptoid conjugate exhibited dramatic reduction of serum protein adsorption and resistance to mammalian cell attachment for over 5 months in an in vitro assay. These new synthetic peptide based antifouling polymers may provide long-term control of surface biofouling in the physiologic, marine, and industrial environments.

In the present study, we have utilized X-ray photoelectron spectroscopy (XPS), spectroscopic ellipsometry (ELM), and optical waveguide lightmode spectroscopy (OWLS) to examine the surface adsorption and protein resistance behavior of bio-inspired polymers consisting of poly(ethylene glycol) (PEG) conjugated to peptide mimics of mussel adhesive proteins. Peptides containing up to three residues of 3,4-dihydroxyphenylalanine (DOPA), a key component of mussel adhesive proteins, were conjugated to monomethoxy-terminated PEG polymers. These mPEG-DOPA polymers were found to be highly adhesive to TiO2 surfaces, with quantitative XPS analysis providing useful insight into the binding mechanism. Additionally, the antifouling properties of immobilized PEG were reflected in the excellent resistance of mPEG-DOPA-modified TiO2 surfaces to protein adsorption. Measurements of mPEG-DOPA and human serum adsorption were related in terms of ethylene glycol (EG) surface density and serum mass adsorbed and demonstrated a threshold of approximately 15-20 EG/nm2, above which substantially little protein adsorbs. With respect to surface density of adsorbed PEG and the associated nonfouling behavior of the adlayers, strong parallels exist between the nonfouling properties of the surface-bound mPEG-DOPA polymers and PEG polymers immobilized to surfaces using other approaches. Peptide anchors containing three DOPA residues resulted in PEG surface densities higher than those achieved using several existing PEG immobilization strategies, suggesting that peptide mimics of mussel adhesive proteins may be useful for achieving high densities of protein-resistant polymers on surfaces.