Search

This article reports the sequential voltammetric determination of Hg(II) and Cu(II) at gold electrode (GE), and of Cu(II), Pb(II), Cd(II), Zn(II) at hanging mercury drop electrode by square wave anodic stripping voltammetry in mussels and clams, possible environmental bio-monitors. The analytical procedure was verified by the analysis of standard reference materials: oyster tissue NBS-SRM 1566a, mussel tissue BCR-CRM 278 and cod muscle BCR-CRM 422. Precision and accuracy, expressed as relative standard deviation and relative error, respectively, were always less than 6%. Then, the analytical procedure was transferred and applied to mussels and clams sampled in two lagoon ecosystems connected with Adriatic Sea (Italy): the Goro Bay, located in the Po river mouth area and the lagoon ecosystem located in proximity to Ravenna. A critical comparison with spectroscopic measurements is also discussed. [ABSTRACT FROM AUTHOR]

This study was conducted to develop systems for the identification of four tuna species (skipjack tuna Katsuwonus pelamis, yellowfin tuna Thunnus albacares, bullet tuna Auxis sp. and Atlantic bonito Sarda sp). At first, raw samples of these species and a mix intended as internal control were prepared for the authentication of fish muscle tissue of the genus Thunnus sp., Auxis sp. and Sarda sp. DNA from raw muscle tissue, the mix and samples was extracted with the DNeasy mericon Food Kit (Qiagen GmbH, Hilden, Germany). The concentration and purity of DNA in raw samples were evaluated using a spectrophotometer. Primers and probe sequences were specifically designed to identify the selected species. In addition, primers and a probe for the endogenous 12S rRNA gene were designed to determine the presence of amplifiable fish (especially tuna) DNA in samples. Furthermore, the species specificity of the designed primers and probes was verified in DNA samples of various tuna and bonito species. Limit of detection for the selected species was calculated as well as the coefficient of determination R2 and efficiency of real-time PCR testing was determined. To evaluate the developed real-time PCR methods, 70 commercial tuna products were analysed. The results show that mislabelling of fish products can still be encountered and, moreover, the presence of an additional species can be identified. [ABSTRACT FROM AUTHOR]

Alternaria toxins are emerging mycotoxins whose regulation and standardization are in progress by the European Commission and the European Committee for Standardization. This paper describes a dilute and shoot approach to determine five Alternaria toxins in selected food samples using liquid chromatography–tandem mass spectrometry (LC-MS/MS). The strategy involves sample extraction with acidified aqueous methanol, followed by a solvent change accomplished via sample evaporation and reconstitution. The quantification is based on isotope dilution, applying all corresponding isotopically labeled internal standards to compensate possible matrix effects of the analysis. The main advantages of the present method over other existing methods includes simple and effective sample preparation, as well as detection with high sensitivity. The five-fold sample dilution can decrease matrix effects, which were evaluated with both external and internal standard methods. The results demonstrated a limit of quantification lower than 1.0 µg/kg for all five analytes for the first time. The newly presented method showed acceptable accuracy (52.7–111%) when analyzing naturally contaminated and spiked standard samples at the described levels. The method was validated for tomato-based and flour samples (wheat, rye, and maize). The absolute recovery ranged from 66.7% to 91.6% (RSD < 10%). The developed method could be an alternative approach for those laboratories that exclude sample cleanup and pre-concentration of state-of-the-art instruments with enhanced sensitivity. [ABSTRACT FROM AUTHOR]

We developed a method for determination of imidacloprid and its metabolites 5-hydroxy imidacloprid, olefin imidacloprid, imidacloprid urea and 6-chloronicotinic acid in Procambarus clarkii (crayfish) tissues using quick, easy, cheap, effective, rugged, and safe (QuEChERS) and high-performance liquid chromatography-triple quadrupole mass spectrometry. Samples (plasma, cephalothorax, hepatopancrea, gill, intestine, and muscle) were extracted with acetonitrile containing 0.1% acetic acid and cleaned up using a neutral alumina column containing a primary secondary amine. The prepared samples were separated using reverse phase chromatography and scanned in the positive and negative ion multiple reaction-monitoring modes. Under the optimum experimental conditions, spiked recoveries for these compounds in P. clarkii samples ranged from 80.6 to 112.7% with relative standard deviations of 4.2 to 12.6%. The limits of detection were 0.02–0.5 μg·L−1, the limits of quantification were 0.05–2.0 μg·L−1 and the method of quantification was 0.05–2.0 μg·kg−1. The method is rapid, simple, sensitive and suitable for rapid determination and analysis of imidacloprid and its metabolites in P. clarkii tissues. [ABSTRACT FROM AUTHOR]

Surface pollution deposition in a high voltage surface can reduce the surface flashover voltage, which is considered to be a serious accident in the transmission of electric power for the high conductivity of pollution in wet weather, such as rain or fog. Accordingly, a rapid and accurate online pollution detection method is of great importance for monitoring the safe status of transmission lines. Usually, to detect the equivalent salt deposit density (ESDD) and non-soluble deposit density (NSDD), the pollution should be collected when power cut off and bring back to lab, time-consuming, low accuracy and unable to meet the online detection. Laser-induced breakdown spectroscopy (LIBS) shows the highest potential for achieving online pollution detection, but its application in high voltage electrical engineering has only just begun to be examined. In this study, a LIBS method for quantitatively detecting the compositions of pollutions on the insulators was investigated, and the spectral characteristics of a natural pollution sample were examined. The energy spectra and LIBS analysis results were compared. LIBS was shown to detect pollution elements that were not detected by conventional energy spectroscopy and had an improved capacity to determine pollution composition. Furthermore, the effects of parameters, such as laser energy intensity and delay time, were investigated for artificial pollutions. Increasing the laser energy intensity and selecting a suitable delay time could enhance the precision and relative spectral intensities of the elements. Additionally, reducing the particle size and increasing the density achieved the same results. [ABSTRACT FROM AUTHOR]

Volatile organic compounds (VOCs) in wood furniture are an important factor that affects indoor air quality. In this study, radiata pine (Pinus radiata D. Don) was treated with sodium bicarbonate and ozone aqueous solution to reduce the VOC contents without sacrificing mechanical properties. The VOCs of radiata pine were identified by gas chromatography-mass spectrometry (GC-MS), and the functional group changes of wood samples were characterized by Fourier-transform infrared spectroscopy (FTIR). The results showed that the main VOCs of radiata pine include alkenes, aldehydes, and esters. The sodium bicarbonate and ozone treatments almost eliminated the VOC contents of radiata pine. The two treatments mentioned above had little effect on compressive strength and surface color of radiata pine. [ABSTRACT FROM AUTHOR]

(1) Background: Flavonoids are the primary medicinal ingredient of Saussurea involucrate, which have significant antioxidant capacity. Optimizing the extraction of Saussurea involucrate flavonoids (SIFs) and exploring the ability to block melanin deposition caused by reactive oxygen can greatly promote the development of S. involucrate whitening products. (2) Methods: Ultrasonic extraction process was optimized using the Box–Behnken design (BBD) and response surface methodology (RSM). Then, the effect of SIFs on antioxidant activity and anti-deposition of melanin, and genes related to the melanin synthesis are studied. (3) Results: The optimal extraction procedures are as follows: the extraction time, ethanol content, and solvent ratio (v/w) are 64 min, 54%, and 54:1, respectively. The reducing activity and scavenging rates of 2,2-diphenyl-1-picrylhydrazyl (DPPH), superoxide anion, hydroxyl radical, and ABTS+ were promoted as more S. involucrate flavonoid extract was added. The SIFs extract induced a decrease in the melanin synthesis by inhibiting the human melanoma A375 cell tyrosinase activity. SIFs also depress expression of melanin synthesis related genes. (4) Conclusions: the highest SIFs content was obtained by using 54% ethanol and 54:1 solvent ratio (v/w) for 64 min. The extract of SIFs exhibited good ability of antioxidant and anti-deposition of melanin in human melanocytes. [ABSTRACT FROM AUTHOR]

Extracellular vesicles (EVs) are lipid bilayer enclosed particles which present in almost all types of biofluids and contain specific proteins, lipids, and RNA. Increasing evidence has demonstrated the tremendous clinical potential of EVs as diagnostic and therapeutic tools, especially in biofluids, since they can be detected without invasive surgery. With the advanced mass spectrometry (MS), it is possible to decipher the protein content of EVs under different physiological and pathological conditions. Therefore, MS-based EV proteomic studies have grown rapidly in the past decade for biomarker discovery. This review focuses on the studies that isolate EVs from different biofluids and contain MS-based proteomic analysis. Literature published in the past decade (2009.1–2019.7) were selected and summarized with emphasis on isolation methods of EVs and MS analysis strategies, with the aim to give an overview of MS-based EV proteomic studies and provide a reference for future research. [ABSTRACT FROM AUTHOR]

Composite nanoparticles were used in solid phase micro membrane tip extraction and capillary electrophoresis to determine phenol and p-amino-phenol in wastewater. The optimized conditions were 100 g/L concentration, 40 min contact time, 11 pH, 5 mg/mL nanoparticles amounts, 60 min desorption time, 9 desorption pH and 298 K temperature. Capillary electrophoresis conditions were phosphate buffer (15 mM, pH 7.0) background electrolyte, 18 kV applied voltage, 214 nm UV detection, 30 s sample loading at 23 ± 1 °C. The maximum percent uptakes of p-amino-phenol and phenol were 80.0 and 85.0%. High ratio recoveries of p-amino-phenol and phenol from nanomaterial were 99.0 and 98. Consequently, the actual extractions of p-amino-phenol and phenol from wastewater were 79.2 and 83.30 percent. The migration times of phenol and p-amino-phenol and were 9.0 and 12.0 min. The detection limits of phenol and p-amino-phenols were 0.1 and 0.2 µg/L after extraction and CE. Therefore, this combination of solid phase micro membrane tip extraction and capillary electrophoresis may be considered as the ideal one for monitoring of toxic phenol and p-amino-phenol in water sample. [ABSTRACT FROM AUTHOR]

Multiclass screening of drugs with high resolution mass spectrometry is of great interest due to its high time-efficiency and excellent accuracy. A high-scale, fast screening method for pesticides in fishery drugs was established based on ultrahigh performance liquid chromatography tandem quadrupole-Orbitrap high-resolution mass spectrometer. The target compounds - were diluted in methanol and extracted by ultrasonic treatment, and the extracts were diluted with MeOH-water (1:1, v/v) and centrifuged to remove impurities. The chromatographic separation was performed on an Accucore aQ-MS column (100 mm × 2.1 mm, 2.6 μm) with gradient elution using 0.1% formic acid in water (containing 5 mmol/L ammonium formate) and 0.1% formic acid in methanol (containing 5 mmol/L ammonium formate) in Full Scan/dd-MS2 (TopN) scan mode. A screening database, including mass spectrometric and chromatographic information, was established for identification of compounds. The screening detection limits of methods ranged between 1–500 mg/kg, the recoveries of real samples spiked with the concentration of 10 mg/kg and 100 mg/kg standard mixture ranged from 70% to 110% for more than sixty compounds, and the relative standard deviations (RSDs) were less than 20%. The application of this method showed that target pesticides were screened out in 10 samples out of 21 practical samples, in which the banned pesticide chlorpyrifos were detected in 3 out of the 10 samples. [ABSTRACT FROM AUTHOR]

Ginseng (Panax ginseng) has long been used as a traditional medicine for the prevention and treatment of various diseases. Generally, the harvest time and age of ginseng have been regarded as important factors determining the efficacy of ginseng. However, most studies have mainly focused on the root of ginseng, while studies on other parts of ginseng such as its berry have been relatively limited. Thus, the aim of this study iss to determine effects of harvest time on yields, phenolics/ginsenosides contents, and the antioxidant/anti-elastase activities of ethanol extracts of three- and four-year-old ginseng berry. In both three- and fourfour-year-old ginseng berry extracts, antioxidant and anti-elastase activities tended to increase as berries ripen from the first week to the last week of July. Liquid chromatography-tandem mass spectrometry analysis has revealed that contents of ginsenosides except Rg1 tend to be the highest in fourfour-year-old ginseng berries harvested in early July. These results indicate that biological activities and ginsenoside profiles of ginseng berry extracts depend on their age and harvest time in July, suggesting the importance of harvest time in the development of functional foods and medicinal products containing ginseng berry extracts. To the best of our knowledge, this is the first report on the influence of harvest time on the biological activity and ginsenoside contents of ginseng berry extracts. [ABSTRACT FROM AUTHOR]

So far, there is no report on the quality evaluation of lemonade available in the market. In this study, a sample preparation method was developed for the determination of flavonoid glycosides by ultra-performance liquid chromatography–mass spectrometry (UPLC-MS) based on vortex-assisted dispersive liquid-liquid microextraction. First, potential flavonoids in lemonade were scanned and identified by ultra-performance liquid chromatography–time of flight mass spectrometry (UPLC-TOF/MS). Five flavonoid glycosides were identified as eriocitrin, narirutin, hesperidin, rutin, and diosmin according to the molecular formula provided by TOF/MS and subsequent confirmation of the authentic standard. Then, an ultra-performance liquid chromatography–triple quadrupole mass spectrometry (UPLC-QqQ/MS) method was developed to determine these five flavonoid glycosides in lemonade. The results showed that the content of rutin in some lemonade was unreasonably high. We suspected that many illegal manufacturers achieved the goal of low-cost counterfeiting lemonade by adding rutin. This suggested that it was necessary for relevant departments of the state to make stricter regulations on the quality standards of lemonade beverages. [ABSTRACT FROM AUTHOR]

In recent years, heavy metals (HMs) levels in soil and vegetation have increased considerably due to traffic pollution. These pollutants can be taken up from the soil through the root system. The ability of plants to accumulate HMs into their tissues can therefore be used to monitor soil pollution. The aim of this study was to test the ruderal species Senecio vulgaris L., Polygonum aviculare L., and Poa annua L., as possible candidates for biomonitoring Cu, Zn, Cd, Cr, Ni and Pb in multiple environments. The soils analyzed in this work came from three different environments (urban, woodland, and ultramafic), and therefore deeply differed for their metal content, texture, pH, and organic matter (OM) content. All urban soils were characterized by high OM content and presence of anthropogenic metals like Pb, Zn, Cd, and Cu. Woodland soils were sandy and characterized by low metal content and low OM content, and ultramafic soils had high Ni and Cr content. This soil variability affected the bioindication properties of the three studied species, leading to the exclusion of most metals (Zn, Cu, Cr, Cd, and Pb) and one species (P. aviculare) due to the lack of linear relations between metal in soil and metal in plants. Senecio vulgaris and Poa annua, conversely, appeared to be good indicators of Ni in all the soils tested. A high linear correlation between total Ni in soil and Ni concentration in P. annua shoots (R2 = 0.78) was found and similar results were achieved for S. vulgaris (R2 = 0.88). [ABSTRACT FROM AUTHOR]

In this work, the electrochemical behavior of hydrochlorothiazide and pyridoxine on the ethylenediamine-modified glassy carbon electrode were investigated by differential pulse voltammetry. In pH 3.4 Britton-Robinson (B-R) buffer solution, both hydrochlorothiazide and pyridoxine had a pair of sensitive irreversible oxidation peaks, that overlapped in the 1.10 V to 1.20 V potential range. Under the optimum experimental conditions, the peak current was linearly related to hydrochlorothiazide and pyridoxine in the concentration range of 0.10–2.0 μg/mL and 0.02–0.40 μg/mL, respectively. Chemometrics methods, including classical least squares (CLS), principal component regression (PCR) and partial least squares (PLS), were introduced to resolve the overlapped signals and determine the two components in mixtures, which avoided the troublesome steps of separation and purification. Finally, the simultaneous determination of the two components in commercial pharmaceuticals was performed with satisfactory results. [ABSTRACT FROM AUTHOR]

Sporotrichosis occurs worldwide and is caused by the fungus Sporothrix brasiliensis. This agent has a high zoonotic potential and is transmitted mainly by bites and scratches from infected felines. A new association between the drugs clotrimazole and itraconazole is shown to be effective against S. brasiliensis yeasts. This association was formulated as a microemulsion containing benzyl alcohol as oil, Tween® 60 and propylene glycol as surfactant and cosurfactant, respectively, and water. Initially, the compatibility between clotrimazole and itraconazole was studied using differential scanning calorimetry (DSC), thermogravimetric analysis (TG), Fourier transform infrared spectroscopy (FTIR), and X-ray powder diffraction (PXRD). Additionally, a simple and efficient analytical HPLC method was developed to simultaneously determine the concentration of clotrimazole and itraconazole in the novel microemulsion. The developed method proved to be efficient, robust, and reproducible for both components of the microemulsion. We also performed an accelerated stability study of this formulation, and the developed analytical method was applied to monitor the content of active ingredients. Interestingly, these investigations led to the detection of a known clotrimazole degradation product whose structure was confirmed using NMR and HRMS, as well as a possible interaction between itraconazole and benzyl alcohol. [ABSTRACT FROM AUTHOR]

Background: Solasodine is a major bioactive ingredient in Solanum nigrum L. that has strong pharmacological characteristics. Therefore, the development of a simple and effective extraction method for obtaining solasodine is highly important. This study aims to provide a rapid and effective method for extracting solasodine from Solanum nigrum L. by microwave-assisted aqueous two-phase extraction (MAATPE). Methods: First, the high-performance liquid chromatography (HPLC) conditions were established for the detection of solasodine. Then, the aqueous two-phase system (ATPS) compositions were examined. On the basis of the results of single-factor experiments, for a better yield, response surface methodology (RSM) was used to optimize influential factors including the extraction temperature, extraction time and liquid-to-solid ratio. Results: The maximum extraction yield of 7.11 ± 0.08 mg/g was obtained at 44 °C, an extraction time of 15 min, and a liquid-to-solid ratio of 42:1 mL/g in the ATPS consisting of EtOH solvent, (NH4)2SO4, and water (28:16:56, w/w/w). The extraction yield of the alkaloid obtained using this method was markedly higher than those of microwave-assisted extraction (MAE) and ultrasonic-assisted extraction (UAE). Conclusions: In this work, solasodine was extracted by MAATPE for the first time and a high yield was obtained. MAATPE is a simple, rapid, and green technique for extraction from medical plants. Thus, the present study will enable the development of a feasible extraction method of active alkaloids from Solanum nigrum L. [ABSTRACT FROM AUTHOR]