Search

Ein biomimetischer Ansatz liegt der Selbstorganisation eines helikalen Poly(para ‐ aryltriazol) ‐ Foldamers um ein Templat zugrunde. Diese solvophobe Faltung ergibt Helices, die sich weiterhin zu langen Nanoröhren zusammenlagern (siehe Bild; Maßstab: 100 nm). Konstrukte einer bestimmten Länge und Chiralität werden mit dem Poly(γ ‐ benzyl ‐ L ‐ glutamat) ‐ Gerüst unter geeigneten Bedingungen erhalten, wie beim selbstorganisierten Aufbau von Tabakmosaikviren. [ABSTRACT FROM AUTHOR]

Over the past 50 years, numerous roads towards carbon-based materials have been explored, all of them being paved using mainly one functional group as the brick: acetylene. The acetylene group, or the carbon–carbon triple bond, is one of the oldest and simplest functional groups in chemistry, and although not present in any of the naturally occurring carbon allotropes, it is an essential tool to access their synthetic carbon-rich family. In general, two strategies towards the synthesis of π-conjugated carbon-rich structures can be employed: (a) either the acetylene group serves as a building blockto access acetylene-derived structures or (b) it serves as a synthetic toolto provide other, usually benzenoid, structures. The recently discovered copper-catalysed azide–alkyne cycloaddition (CuAAC) reaction, however, represents a new powerful alternative: it transforms the acetylene group into a five-membered heteroaromatic 1H-1,2,3-triazole (triazole) ring and this gives rise to new opportunities. Compared with all-carbon aromatic non-functional rings, the triazole ring possesses three nitrogen atoms and, thus, can serve as a ligand to coordinate metals, or as a hydrogen bond acceptor and donor. This Feature Article summarises examples of using the triazole ring to construct conjugation- and/or function-related heteroaromatic materials, such as tuneable multichromophoric covalent ensembles, macrocyclic receptors or responsive foldamers. These recent examples, which open a new sub-field within organic materials, started to appear only few years ago and represent “a few more bricks” on the road to carbon-rich functional materials. [ABSTRACT FROM AUTHOR]

We describe a novel modular approach to a series of luminescent iridium complexes bearing triazole–pyridine-derived ligands that were conveniently prepared by using “click” chemistry. One, two or three triazole–pyridine units were effectively built into the heteroaromatic macromolecule using versatile acetylene- and azide-functionalised precursors. Using this approach, a series of iridium-derived molecules, that differ in the number of iridium centres, the structural characteristics of the cyclometalating ligand and the backbone, were synthesised. The preliminary photophysical properties of the prepared complexes indicate that there is only limited interaction (through space or through the backbone) between the iridium centres within one molecule and that each iridium centre retains its individual properties. The results show that our approach can be generally applied towards covalently linked multichromophoric systems with potential application, for instance, in the design and preparation of tunable light emitters. As a demonstration of this concept, a single molecule white-light emitter, constructed from two iridium centres (yellow emission) and a fluorene unit (blue emission), is presented. [ABSTRACT FROM AUTHOR]

A novel, elegant, and significantly improved protocol for the synthesis of a protected octaacetylene phthalocyanine is described. Inexpensive, mild, and environmentally benign iodination of 1,2-dibromobenzene and subsequent optimized chemoselective palladium-catalyzed cyanation are employed to effectively build up the key intermediate 4,5-dibromophthalonitrile in two steps. Introduction of the tert-butyldimethylsilyl-protected acetylene moieties via a Sonogashira cross-coupling provides the desired phthalonitrile precursor that, after cyclization, yielded the protected octaacetylene phthalocyanine. Subsequently, in situ deprotection and "clicking" are employed as a highly efficient and quantitative route to a novel class of octatriazole-functionalized phthalocyanines. The ability of such triazole-derived phthalocyanines to form well-defined supramolecular structures upon doping with zinc(lI) triflate is demonstrated. [ABSTRACT FROM AUTHOR]

We have investigated the effect of structure modification of various discotic liquid crystal side chain polymers on their phase transitions and the resulting dynamics. This has resulted in a better understanding of the structure of the various nematic phases that can be formed, in particular giving rise to the identification of supramolecular thermotropic nematic phases where the fundamental units comprise assemblies of molecules. In addition we have examined the dynamics of field-induced order parameters in the isotropic phase of calamitic side chain polymers using dielectric relaxation spectroscopy and dynamic Kerr effect measurements. [ABSTRACT FROM AUTHOR]

A series of novel mesogens have been prepared by a five-fold Sonogashira reaction of terminal acetylenes with a functionalized pentabromophenol. The corresponding side chain polymers were prepared by a polymer analogous substitution reaction. The mesogens differ in the nature of the substituents, linking five hexyl tails to the aromatic core, i.e. CH2, O, S, SO2 and CONH groups. A wide range of mesophases and corresponding transition temperatures has been detected, ranging from low melting nematic phases to highly stable columnar phases. The widely variable phase behavior is described in terms of specific intermolecular interactions. [ABSTRACT FROM AUTHOR]

Various core materials have been introduced at the terminal end of a discotic mesogen (based on a pentakis(methylphenylethynyl) phenoxy core), resulting in the formation of liquid crystalline ‘monomers’ and ‘dimers.’ The mesomorphic properties of this series of derivatives were investigated as a function of the attached core material. It is shown that the clearing temperatures of the mesogens are dependent on: (i) the fraction of rigid mesogen, (ii) the presence of any linkages between the mesogens and (iii) the presence of any H-bonding interactions. In some materials extra stabilisation of the phase or, indeed, higher ordered mesophases were observed due to the end-group interactions. In addition, we report the investigations to prepare DAB-Am based dendrimers. [ABSTRACT FROM AUTHOR]

Nature uses discrete molecular building blocks to form polymers that assemble into multicomponent, multi-dynamic networks, inside (cytoskeleton) and outside (extracellular matrix) the cell. Both the intra-fibrous molecular dynamics and interactions between fibers dictate (non)linear mechanics, such as stress stiffening and relaxation, and ultimately biological function. Current synthetic systems capture only one dynamic process. Here, we present multi-dynamic hydrogels by uniting a stress-stiffening polymer with supramolecular polymers. Crucial is the molecular dynamics of the supramolecular polymers: They dictate the interaction strength with the stress-stiffening polymer and the subsequent dynamic mechanical properties of the mixed networks. The biological relevance of our multi-dynamic hydrogels is demonstrated by their ability to support fibroblast cell spreading. Future work may address the display of various dynamically presented bioactive cues to cells. [ABSTRACT FROM AUTHOR]

Over the years, synthetic hydrogels have proven remarkably useful as cell culture matrixes to elucidate the role of the extracellular matrix (ECM) on cell behavior. Yet, their lack of interconnected macropores undermines the widespread use of hydrogels in biomedical applications. To overcome this limitation, cryogels, a class of macroporous hydrogels, are rapidly emerging. Here, we introduce a new, highly elastic, and tunable synthetic cryogel, based on poly(isocyanopeptides) (PIC). Introduction of methacrylate groups on PIC facilitated cryopolymerization through free-radical polymerization and afforded cryogels with an interconnected macroporous structure. We investigated which cryogelation parameters can be used to tune the architectural and mechanical properties of the PIC cryogels by systematically altering cryopolymerization temperature, polymer concentration, and polymer molecular weight. We show that for decreasing cryopolymerization temperatures, there is a correlation between cryogel pore size and stiffness. More importantly, we demonstrate that by simply varying the polymer concentration, we can selectively tune the compressive strength of PIC cryogels without affecting their architecture. This unique feature is highly useful for biomedical applications, as it facilitates decoupling of stiffness from other variables such as pore size. As such, PIC cryogels provide an interesting new biomaterial for scientists to unravel the role of the ECM in cellular functions.

Patients diagnosed with advanced prostate cancer (PCa) often experience incurable bone metastases; however, a lack of relevant experimental models has hampered the study of disease mechanisms and the development of therapeutic strategies. In this study, we employed the recently established Temp erature-based Easy -separable ( TempEasy ) 3D cell coculture system to investigate PCa bone metastasis. Through coculturing PCa and bone cells for 7 days, our results showed a reduction in PCa cell proliferation, an increase in neovascularization, and an enhanced metastasis potential when cocultured with bone cells. Additionally, we observed increased cell proliferation, higher stemness, and decreased bone matrix protein expression in bone cells when cocultured with PCa cells. Furthermore, we demonstrated that the stiffness of the extracellular matrix had a negligible impact on molecular responses in both primary (PCa cells) and distant malignant (bone cells) sites. The TempEasy 3D hydrogel coculture system is an easy-to-use and versatile coculture system that provides valuable insights into the mechanisms of cell-cell communication and interaction in cancer metastasis.

Reliable in vitro models closely resembling native tissue are urgently needed for disease modeling and drug screening applications. Recently, conductive biomaterials have received increasing attention in the development of in vitro models as they permit exogenous electrical signals to guide cells toward a desired cellular response. Interestingly, they have demonstrated that they promote cellular proliferation and adhesion even without external electrical stimulation. This paper describes the development of a conductive, fully synthetic hydrogel based on hybrids of the peptide-modified polyisocyanide (PIC-RGD) and the relatively conductive poly(aniline- co - N -(4-sulfophenyl)aniline) (PASA) and its suitability as the in vitro matrix. We demonstrate that incorporating PASA enhances the PIC-RGD hydrogel's electroactive nature without significantly altering the fibrous architecture and nonlinear mechanics of the PIC-RGD network. The biocompatibility of our model was assessed through phenotyping cultured human foreskin fibroblasts (HFF) and murine C2C12 myoblasts. Immunofluorescence analysis revealed that PIC-PASA hydrogels inhibit the fibrotic behavior of HFFs while promoting myogenesis in C2C12 cells without electrical stimulation. The composite PIC-PASA hydrogel can actively change the cell fate of different cell types, providing an attractive tool to improve skin and muscle repair.

Gradient matters with hierarchical structures endow the natural world with excellent integrity and diversity. Currently, direct ink writing 3D printing is attracting tremendous interest, and has been used to explore the fabrication of 1D and 2D hierarchical structures by adjusting the diameter, spacing, and angle between filaments. However, it is difficult to generate complex 3D gradient matters owing to the inherent limitations of existing methods in terms of available gradient dimension, gradient resolution, and shape fidelity. Here, we report a filament diameter-adjustable 3D printing strategy that enables conventional extrusion 3D printers to produce 1D, 2D, and 3D gradient matters with tunable heterogeneous structures by continuously varying the volume of deposited ink on the printing trajectory. In detail, we develop diameter-programmable filaments by customizing the printing velocity and height. To achieve high shape fidelity, we specially add supporting layers at needed locations. Finally, we showcase multi-disciplinary applications of our strategy in creating horizontal, radial, and axial gradient structures, letter-embedded structures, metastructures, tissue-mimicking scaffolds, flexible electronics, and time-driven devices. By showing the potential of this strategy, we anticipate that it could be easily extended to a variety of filament-based additive manufacturing technologies and facilitate the development of functionally graded structures., (© 2024. The Author(s).)

The suboptimal outcomes of pelvic organ prolapse (POP) surgery illustrate the demand for improved therapies. However, their development is hampered by the limited knowledge on the cellular pathophysiology of POP. Current investigations, that are limited to tissues and 2D in vitro models, provide highly inconclusive results on how the extracellular matrix (ECM) metabolism and fibroblasts are affected in POP. This study uses a physiologically relevant 3D in vitro model to investigate the cellular pathophysiology of POP by determining the differences between POP and non-POP fibroblasts on ECM metabolism, proliferation, and fibroblast-to-myofibroblast (FMT) transition. This model, based on the synthetic and biomimetic polyisocyanide hydrogel, enables the incorporation of mechanical loading, which simulates the forces exerted on the pelvic floor. Under static conditions, 3D cultured POP fibroblasts are less proliferative, undergo FMT, and exhibit lower collagen and elastin contents compared to non-POP fibroblasts. However, under mechanical loading, the differences between POP and non-POP fibroblasts are less pronounced. This study contributes to the development of more comprehensive models that can accurately mimic the POP pathophysiology, which will aid in an enhanced understanding and may contribute to improved therapies in the future., (© 2024 The Authors. Advanced Healthcare Materials published by Wiley‐VCH GmbH.)

Fibrosis is characterized by the formation of fibrous connective tissue in response to primary injury. As a result, an affected organ may lose part of its functionality due to chronic, organ-specific tissue damage. Since fibrosis is a leading cause of death worldwide, targeting fibrotic diseases with antifibrotic hydrogels can be a lifesaving therapeutic strategy. This study developed a novel hybrid antifibrotic hydrogel by combining the synthetic polyisocyanide (PIC) with hyaluronic acid (HA). Gels of PIC are highly tailorable, thermosensitive, and strongly biomimetic in architecture and mechanical properties, whereas HA is known to promote non-fibrotic fetal wound healing and inhibits inflammatory signaling. The developed HA-PIC hybrids were biocompatible with physical properties comparable to those of the PIC gels. The antifibrotic nature of the gels was assessed by 3D cultures of human foreskin fibroblasts in the presence (or absence as control) of TGFβ1 that promotes differentiation into myofibroblasts, a critical step in fibrosis. Proliferation and macroscopic contraction assays and studies on the formation of stress fibers and characteristic fibrosis markers all indicate a strong antifibrotic nature of HA-PIC hydrogel. We showed that these effects originate from both the lightly crosslinked architecture and the presence of HA itself. The hybrid displaying both these effects shows the strongest antifibrotic nature and is a promising candidate for use as in vivo treatment for skin fibrosis., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: PHJ Kouwer reports financial support was provided by Netherlands Ministry of Education Culture and Science. none., (Copyright © 2023. Published by Elsevier B.V.)

In pelvic organ prolapse (POP) patients, the uterus, bladder and/or rectum descends into vagina due to weakened support tissues. High recurrence rates after POP surgery suggest an urgent need for improved surgical outcomes. Our aim is to promote connective tissue healing that results in stimulated tissue support functions by surgically applying a hydrogel functionalized with biological cues. We used known vaginal wound healing promoting factors (basic fibroblast growth factor, β-estradiol, adipose-derived stem cells) in the biomimetic and injectable polyisocyanide (PIC) hydrogel, which in itself induces regenerative vaginal fibroblast behavior. The regenerative capacity of injected PIC hydrogel, and the additional pro-regenerative effects of these bioactive factors was evaluated in abdominal wounds in rabbits. Assessment of connective tissue healing (tensile testing, histology, immunohistochemistry) revealed that injection with all PIC formulations resulted in a statistically significant stiffness and collagen increase over time, in contrast to sham. Histological evaluation indicated new tissue growth with moderate to mild immune activity at the hydrogel - tissue interface. The results suggest that PIC injection in an abdominal wound improves healing towards regaining load-bearing capacity, which encourages us to investigate application of the hydrogel in a more translational vaginal model for POP surgery in sheep., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

With its involvement in cell proliferation, migration and differentiation basic fibroblast growth factor (bFGF) has great potential for tissue engineering purposes. So far, however, clinical translation of soluble bFGF-based therapies is unsuccessful, because the required effective doses are often supraphysiological, which may cause adverse effects. An effective solution is growth factor immobilization, whereby bFGF retains its bioactivity at increased efficacy. Studied carriers include films, solid scaffolds, and particles, as well as natural and synthetic hydrogels. However, these synthetic hydrogels poorly resemble the characteristics of the native extracellular matrix (ECM). In this work, bFGF is covalently conjugated to the synthetic, but highly biocompatible, polyisocyanide-based hydrogel (PIC-bFGF), which closely mimics the architecture and mechanical properties of the ECM. The growth factor conjugation protocol is straightforward and readily extrapolated to other growth factors or proteins. The PIC-bFGF hydrogel shows a prolonged bioactivity up to 4 weeks although no clear effects on the ECM metabolism are observed. Beyond the future potential of the PIC-bFGF hydrogel toward various tissue engineering applications, this work underlines that simple biological conjugation procedures are a powerful strategy to induce additional bioactivity in 3D synthetic cell culture matrices., (© 2023 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH.)

There is an urgent need for improved outcomes in the treatment of pelvic organ prolapse (POP). Success of primary surgery relies on the load bearing capacity of plicated connective tissue underneath the vaginal wall, which is compromised due to an altered vaginal fibroblast function and collagen composition. There is an important factor in connective tissue repair that relates to changes in stiffness of the vaginal fibroblast microenvironment, which influences cell activity through cellular mechanosensing. The aim of this study is to investigate the effect of stiffness changes on vaginal fibroblast functions that relate to connective tissue healing in prolapse repair. The substrate stiffness was controlled by changing the polymer concentration in the fibrous and strongly biomimetic polyisocyanide (PIC) hydrogel. We analyzed stiffness during cell culture and assessed the consequential fibroblast proliferation, morphology, collagen deposition, and contraction. Our results show that increasing stiffness coincides with vaginal fibroblast alignment, promotes collagen deposition, and inhibits PIC gel contraction. These findings suggest that the matrix stiffness directly influences vaginal fibroblast functionality. Moreover, we observed a buildup in stiffness and collagen, with an enhanced fibroblast and collagen organization on the PIC-substrate, which indicate an enhanced structural integrity of the hydrogel-cell construct. An improved tissue structure during healing is relevant in the functional repair of POP. Therefore, this study encourages future research in the use of PIC gels as a supplement in prolapse surgery, whereby the hydrogel stiffness should be considered.

Surgical outcomes of pelvic organ prolapse (POP) surgery are poor, resulting in a 20% recurrence risk. Following the hypothesis that impaired wound healing is the main determinant of recurrent POP, growth factors have the potential to promote wound healing and may improve surgical outcomes. In this study, we systematically reviewed the effect of growth factors on vaginal wound healing in both in vitro and animal studies. For each independent comparison, the standardized mean difference and 95% CI were calculated using the Hedges' g correction. Of the 3858 retrieved studies, seven studies were included, of which six were included in meta-analysis (three in vitro studies and four in vivo studies). In vitro , basic fibroblast growth factor (bFGF) promotes proliferation, differentiation, and collagen types I and III production. Epidermal growth factor stimulates proliferation and connective tissue growth factor promotes Tenascin-C expression. These effects, however, are less pronounced in vivo ; only bFGF slightly promotes collagen production. The review shows that growth factors, particularly bFGF, are able to promote vaginal wound healing in vitro . The uncertain in vivo findings suggest that preclinical models should be improved. The ultimate goal is to develop effective growth factor-supplemented therapies that improve surgical outcomes for POP.

Cells continuously sense external forces from their microenvironment, the extracellular matrix (ECM). In turn, they generate contractile forces, which stiffen and remodel this matrix. Although this bidirectional mechanical exchange is crucial for many cell functions, it remains poorly understood. Key challenges are that the majority of available matrices for such studies, either natural or synthetic, are difficult to control or lack biological relevance. Here, we use a synthetic, yet highly biomimetic hydrogel based on polyisocyanide (PIC) polymers to investigate the effects of the fibrous architecture and the nonlinear mechanics on cell-matrix interactions. Live-cell rheology was combined with advanced microscopy-based approaches to understand the mechanisms behind cell-induced matrix stiffening and plastic remodeling. We demonstrate how cell-mediated fiber remodeling and the propagation of fiber displacements are modulated by adjusting the biological and mechanical properties of this material. Moreover, we validate the biological relevance of our results by demonstrating that cellular tractions in PIC gels develop analogously to those in the natural ECM. This study highlights the potential of PIC gels to disentangle complex bidirectional cell-matrix interactions and to improve the design of materials for mechanobiology studies.

Pelvic organ prolapse (POP) is the descent of the bladder, uterus, and/or rectum into the vagina. POP is associated with altered vaginal fibroblast functionality and connective tissue composition in the vaginal wall. The results of surgical intervention are poor, which may be related to the lack of true restoration of the connective tissue. An innovative treatment addresses tissue repair after surgery by the introduction of a bioactive supplement that enhances the healing process through collagen and elastin deposition. As a novel strategy, we first studied the effects in an in vitro model. Here, we investigate how the presence of cell binding GRGDS (RGD) peptides on the highly biomimetic polyisocyanide (PIC) gel facilitates and promotes the function of primary vaginal fibroblasts isolated from a POP patient. Fibroblast function was analyzed in terms of morphology, proliferation, and extracellular matrix (ECM) deposition and remodeling. RGD modification of the gel facilitated cell spread and proliferation. Quantitative outcomes of the ECM content indicated increased production of collagen and elastin by fibroblasts on gels with the highest RGD density. The in vitro results suggest that PIC-RGD hydrogel application may translate into improved connective tissue healing in the pelvic floor, which is essential for its use as a regeneration promoting additive in surgery., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier B.V.)

The materials properties of biological tissues are unique. Nature is able to spatially and temporally manipulate (mechanical) properties while maintaining responsiveness toward a variety of cues; all without majorly changing the material's composition. Artificial mimics, synthetic or biomaterial-based are far less advanced and poorly reproduce the natural cell microenvironment. A viable strategy to generate materials with advanced properties combines different materials into nanocomposites. This work describes nanocomposites of a synthetic fibrous hydrogel, based on polyisocyanide (PIC), that is noncovalently linked to a responsive cross-linker. The introduction of the cross-linker transforms the PIC gel from a static fibrous extracellular matrix mimic to a highly dynamic material that maintains biocompatibility, as demonstrated by in situ modification of the (non)linear mechanical properties and efficient self-healing properties. Key in the material design is cross-linking at the fibrillar level using nanoparticles, which, simultaneously may be used to introduce more advanced properties., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

In vivo, natural biomaterials are frequently anisotropic, exhibiting directional microstructures and mechanical properties. It remains challenging to develop such anisotropy in synthetic materials. Here, a facile one-step approach for in situ fabrication of hydrogels with hierarchically anisotropic architectures and direction-dependent mechanical properties is proposed. The anisotropic hydrogels, composed of a fibrous gel network (0.1 wt%), cross-linked with magnetic nanoparticles (spheres, rods, and wires, <0.1 wt%) are readily formed in the presence of very low magnetic fields (<20 mT). The anisotropy of the nanoparticles is transduced to the polymer network, leading to macroscopic anisotropy, for instance, in mechanical properties. Electrostatic repulsion by the negatively charged nanoparticles induces an additional layer of order in the material, perpendicular to the magnetic field direction. The straightforward fabrication strategy allows for stepwise deposition of layers with different degrees or directions of anisotropy, which enables the formation of complex structures that are able to mimic some of the complex hierarchical architectures found in biology. It is anticipated that this approach of hydrogel alignment may serve as a guide for designing advanced biomaterials in tissue engineering., (© 2022 The Authors. Small published by Wiley-VCH GmbH.)

The driving factors causing fibrosis and scar formation include fibroblast differentiation into myofibroblasts and hampered myofibroblast apoptosis, which ultimately results in collagen accumulation and tissue contraction. Currently, only very few drugs are available for fibrosis treatment, and there is an urgent demand for new pharmaceutical products. High-throughput in vitro fibrosis models are necessary to develop such drugs. In this study, we developed such a novel model based on synthetic polyisocyanide (PIC-RGD) hydrogels. The model not only measures contraction but also allows for subsequent molecular and cellular analysis. Fibroblasts were seeded in small (10 μL) PIC-RGD gels in the absence or presence of TGFβ1, the latter to induce myofibroblast differentiation. The contraction model clearly differentiates fibroblasts and myofibroblasts. Besides a stronger contraction, we also observed α-smooth muscle actin (αSMA) production and higher collagen deposition for the latter. The results were supported by mRNA expression experiments of αSMA , Col1α1 , P53 , and Ki67 . As proof of principle, the effects of FDA-approved antifibrotic drugs nintedanib and pirfenidone were tested in our newly developed fibrosis model. Both drugs clearly reduce myofibroblast-induced contraction. Moreover, both drugs significantly decrease myofibroblast viability. Our low-volume synthetic PIC-RGD hydrogel platform is an attractive tool for high-throughput in vitro antifibrotic drug screening.

Interactions between different cell types are crucial for their behavior in tissues, but are rarely considered in 3D in vitro cell culture experiments. One reason is that such coculture experiments are sometimes difficult to perform in 3D or require specialized equipment or know-how. Here, a new 3D cell coculture system is introduced, TempEasy, which is readily applied in any cell culture lab. The matrix material is based on polyisocyanide hydrogels, which closely resemble the mechanical characteristics of the natural extracellular matrix. Gels with different gelation temperatures, seeded with different cells, are placed on top of each other to form an indirect coculture. Cooling reverses gelation, allowing cell harvesting from each layer separately, which benefits downstream analysis. To demonstrate the potential of TempEasy , human adipose stem cells (hADSCs) with vaginal epithelial fibroblasts are cocultured. The analysis of a 7-day coculture shows that hADSCs promote cell-cell interaction of fibroblasts, while fibroblasts promote proliferation and differentiation of hADSCs. TempEasy provides a straightforward operational platform for indirect cocultures of cells of different lineages in well-defined microenvironments., (© 2022 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH.)

Recent far-reaching advances in synthetic biology have yielded exciting tools for the creation of new materials. Conversely, advances in the fundamental understanding of soft-condensed matter, polymers and biomaterials offer new avenues to extend the reach of synthetic biology. The broad and exciting range of possible applications have substantial implications to address grand challenges in health, biotechnology and sustainability. Despite the potentially transformative impact that lies at the interface of synthetic biology and biomaterials, the two fields have, so far, progressed mostly separately. This Perspective provides a review of recent key advances in these two fields, and a roadmap for collaboration at the interface between the two communities. We highlight the near-term applications of this interface to the development of hierarchically structured biomaterials, from bioinspired building blocks to 'living' materials that sense and respond based on the reciprocal interactions between materials and embedded cells., (© 2022. Springer Nature Limited.)

The mechanical environment of a cell is not constant. This dynamic behavior is exceedingly difficult to capture in (synthetic) in vitro matrices. This paper describes a novel, highly adaptive hybrid hydrogel composed of magnetically sensitive magnetite nanorods and a stress-responsive synthetic matrix. Nanorod rearrangement after application of (small) magnetic fields induces strain in the network, which results in a strong (over 10-fold) stiffening even at minimal (2.5 wt %) nanorod concentrations. Moreover, the stiffening mechanism yields a fast and fully reversible response. In the manuscript, we quantitatively analyze that forces generated by the particles are comparable to cellular forces. We demonstrate the value of magnetic stiffening in a 3D MCF10A epithelial cell experiment, where simply culturing on top of a permanent magnet gives rise to changes in the cell morphology. This work shows that our hydrogels are uniquely suited as 3D cell culture systems with on-demand adaptive mechanical properties.

Three-dimensional (3D) matrix models using hydrogels are powerful tools to understand and predict cell behavior. The interactions between the cell and its matrix, however is highly complex: the matrix has a profound effect on basic cell functions but simultaneously, cells are able to actively manipulate the matrix properties. This (mechano)reciprocity between cells and the extracellular matrix (ECM) is central in regulating tissue functions and it is fundamentally important to broadly consider the biomechanical properties of the in vivo ECM when designing in vitro matrix models. This manuscript discusses two commonly used biopolymer networks, i.e. collagen and fibrin gels, and one synthetic polymer network, polyisocyanide gel (PIC), which all possess the characteristic nonlinear mechanics in the biological stress regime. We start from the structure of the materials, then address the uses, advantages, and limitations of each material, to provide a guideline for tissue engineers and biophysicists in utilizing current materials and also designing new materials for 3D cell culture purposes., Competing Interests: The authors declare no conflict of interest., (© 2021 The Authors.)

In periodontal treatment, topical adjunctive therapy with antimicrobials or anti-inflammatory agents is frequently applied. However, currently available drug carrier biomaterials often exhibit poor perfusion into small crevices, such as the deep and irregular periodontal pockets, due to relatively high viscosity. Moreover, high polymer concentrations of the polymer can potentially be cytotoxic upon confined local administration. This study aimed to formulate an antimicrobial and anti-inflammatory treatment option, by incorporating doxycycline (DOX) and/or lipoxin A 4 (LXA 4 ) into 0.5 wt% thermo-reversible polyisocyanopeptide (PIC). PIC can form hydrogels upon low polymer concentration, and we hypothesized that the thermo-reversible nature of the material would allow for application into the periodontal pocket. The formulations were characterized in vitro and finally tested in dogs with naturally occurring periodontitis, which were not euthanized afterward. Results showed that PIC/DOX/LXA 4 hydrogel could be easily prepared and injected into periodontal pockets. The PIC hydrogel facilitated the release of DOX or LXA 4 for around 4 days in vitro. When applied in dogs, the hydrogel exerted no local or systemic adverse effects. Gels loaded with LXA 4 and/or DOX reduced the subgingival bacterial load and pro-inflammatory interleukin-8 level. In addition, PIC-DOX and PIC-DOX+LXA 4 improved gingival clinical attachment by 0.6 mm compared with conventional periodontal treatment alone (i.e. mechanical debridement). In conclusion, the thermo-reversible PIC hydrogel is a safe and effective vehicle for periodontal drug delivery., Competing Interests: Declaration of Competing Interest The authors declare no potential conflicts of interest with respect to the authorship and/or publication of this article., (Copyright © 2020. Published by Elsevier Ltd.)

In periodontal treatment, patient differences in disease phenotype and treatment responses are well documented. Therefore, therapy duration and dosage should be tailored to the requirements of individual patients. To facilitate such personalized medication, a tunable and controllable system is needed to deliver drugs directly into the diseased periodontal pockets. The current study established a system to achieve different drug release rates and periods by incorporating bioactive agents into poly(lactic-co-glycolic acid) (PLGA) microspheres dispersed into a novel thermo-reversible polyisocyanopeptide (PIC) hydrogel. Specifically, two drugs, i.e. doxycycline and lipoxin, were separately loaded into acid-terminated and ester-capped PLGA by electrospraying. Different formulations were developed by loading the two kinds of PLGA microspheres with different mass ratios in the PIC gels. The results demonstrated that the PIC-PLGA vehicle exhibited appropriate injectability, long-term structural stability, and no obvious in vivo inflammatory response for the desired clinical application. Furthermore, the release profiles of drugs could be manipulated by adjusting the loaded mass ratio of acid- and ester- terminated PLGA microspheres in the PIC gels. The more ester-capped PLGA was used, the slower the release rate and the longer the release period, and vice versa. Additionally, the released drugs still preserved their bio-efficacy. This PIC-PLGA system can be further developed and tested in translational studies to demonstrate the final clinical benefit., Competing Interests: Declaration of Competing Interest This work was financially supported by the Dutch Research Council (NWO) Domain Applied and Engineering Sciences (project number 13844) and the Chinese Scholarship Council (project number 201509370020 and 201506170058). The authors declare no potential conflicts of interest with respect to the authorship and/or publication of this article., (Copyright © 2020 The Author(s). Published by Elsevier B.V. All rights reserved.)

Adequate sterilization procedures for soft biomaterials such as hydrogels are known to be challenging. These materials are delicate in structure, making them sensitive to harsh conditions and prone to damage. In this study, a suitable sterilization method for hydrogels composed of tri(ethylene glycol)-functionalized polyisocyanopeptides (PIC) was explored. These high biomimetic hydrogels are temperature and strain sensitive and have been presented as novel cell culturing matrices, wound dressings, and drug carriers. The methods that were investigated include autoclaving, γ-irradiation, ultraviolet (UV) light irradiation, and supercritical CO 2 (scCO 2 ) treatment. The results show that autoclaving and γ-irradiation have deleterious effects on the gelation behavior and mechanical characteristics of PIC. For γ-irradiation, cooling the gels on dry ice alleviated this negative impact, but not sufficiently enough to make the method viable. In contrast, UV light and scCO 2 treatment do not affect the mechanical properties of the PIC gels. Studies with gels inoculated with 10 7 CFU/mL Gram-positive bacteria Staphylococcus aureus show that only scCO 2 is capable of successfully sterilizing PIC hydrogels by achieving a 6-log reduction in bacterial load. It was concluded that, within the range of tested techniques, the sterilization of PIC is limited to scCO 2 .

Although common in biology, controlled stiffening of hydrogels in vitro is difficult to achieve; the required stimuli are commonly large and/or the stiffening amplitudes small. Here, we describe the hierarchical mechanics of ultra-responsive hybrid hydrogels composed of two synthetic networks, one semi-flexible and stress-responsive, the other flexible and thermoresponsive. Heating collapses the flexible network, which generates internal stress that causes the hybrid gel to stiffen up to 50 times its original modulus; an effect that is instantaneous and fully reversible. The average generated forces amount to ~1 pN per network fibre, which are similar to values found for stiffening resulting from myosin molecular motors in actin. The excellent control, reversible nature and large response gives access to many biological and bio-like applications, including tissue engineering with truly dynamic mechanics and life-like matter.