Search

The simplified metrological software test (MST) for modeling the method of determining the thermocouple (TC) error in situ during operation is considered in the paper. The interaction between the proposed MST and a temperature measuring system is also reflected in order to study the error of determining the TC error in situ during operation. The modelling studies of the random error influence of the temperature measuring system, as well as interference magnitude (both the common and normal mode noises) on the error of determining the TC error in situ during operation using the proposed MST, have been carried out. The noise and interference of the order of 5-6 μV cause the error of about 0.2-0.3°C. It is shown that high noise immunity is essential for accurate temperature measurements using TCs. [ABSTRACT FROM AUTHOR]

The results of the calculation of the energy band structure and luminescent research of CeF3 crystals are presented. The existence of two 5d1 and 5d2 subbands of the conduction band genetically derived from 5d states of Ce3+ ions with different effective electron masses of 4.9 me and 0.9 me, respectively, is revealed. The large electron effective mass in the 5d1 subband facilitates the localization of electronic excitations forming the 4f-5d cerium Frenkel self-trapped excitons responsible for the CeF3 luminescence. The structure of the excitation spectra of the exciton luminescence peaked at 290 nm, and the defect luminescence at 340 nm confirms the aforementioned calculated features of the conduction band of CeF3 crystals. The peculiarities of the excitation spectra of the luminescence of CaF2:Ce crystals dependent on the cerium concentration are considered with respect to the phase formation possibility of CeF3. [ABSTRACT FROM AUTHOR]

The development was carried out using the Qt5.2 integrated development environment, which uses the programming language C++. The main advantage of this environment is that the code written in it can be compiled to different platforms (for example, Windows, Linux, Mac OS). A software router based on a modular architecture has been developed. It uses the socket technology, which allows forming a program-oriented packet network with any topology, including full-coupled topology. A network traffic generator to test the developed software router has been designed. We proposed a scheme to measure the packet processing time of a router using a specialized packet-capture network interface cards (NIC 1 and NIC 2) and a novel traffic generator installed on PC. Based on an experimental test bed we confirmed that our software router provides a cost-efficient alternative to the expensive, special hardware router CISCO 2801. [ABSTRACT FROM AUTHOR]

In this paper, considering the hydrogen production cycle coupled with the supercritical CO 2 cycle, hydrogen is produced as a clean fuel along with power and heat production. Also, the world's need for clean energy doubles the solutions to achieve clean hydrogen energy. The investigated cycle has a supercritical CO 2 cycle with a combustion chamber where enriched fuel is introduced. Combustion products produce work in the gas turbine, and further hydrogen separation is formed with the help of water gas shift reaction and hydrogen separation membrane. In the thermodynamic analysis, combustion chamber known as the most irreversible member of set, where the most exergy is lost. The energy and exergy efficiency for whole set are 64.82%, 52.46% respectively. Produced hydrogen mass flow rate calculated 46.8 kg/h. Also, multi-objective optimization based on genetic algorithm were done and the results were reported. All calculation and optimization method has been done in MATLAB software. [Display omitted] • Hydrogen production cycle coupled with the supercritical CO2 cycle is optimized. • Multi-objective optimization of combined cycle power plants has been performed. • Optimal energy and exergy efficiency can reach 64.82%, 52.46% respectively. [ABSTRACT FROM AUTHOR]

Oily sludge-derived activated carbon was prepared using the potassium hydroxide (KOH) activation method using oily sludge as a raw material, and one-factor experiments determined the best conditions for preparing activated carbon. The activated carbon's morphological structure and surface chemical properties were analyzed by scanning different characterization tools, and the adsorption behavior of tetracycline hydrochloride was investigated. The results showed that the optimum conditions for preparing oily sludge-derived activated carbon were an activation temperature of 400 °C, activation time of 30 min, activator concentration of 1 mol/L, and impregnation ratio of 2 mL/g. After activation, the activated carbon had more pores and a more orderly crystal structure arrangement, the specific surface area was 2.07 times higher than that before activation, and the surface was rich in functional groups such as -HO, -C-O, -C=C, and -C-H, which increased the active sites of activated carbon. Physicochemical effects dominated the adsorption process. It belonged to the spontaneous heat absorption process under the quasi-secondary kinetic and Langmuir isothermal models. The maximum monolayer adsorption capacity of KOH-activated carbon was 205.1 mg·g -1 .