Search

Purpose: Digital breast tomosynthesis (DBT) has been introduced more than a decade ago. Studies have shown higher breast cancer detection rates and lower recall rates, and it has become an established imaging method in diagnostic settings. However, full-field digital mammography (FFDM) remains the most common imaging modality for screening in many countries, as it delivers high-resolution planar images of the breast. To combine the advantages of DBT with the faster acquisition and the unique in-plane resolution capabilities known from FFDM, a system concept was developed for application in screening and diagnosis., Approach: The concept comprises an X-ray tube with adaptive focal spot position based on the flying focal spot (FFS) technology and optimized X-ray spectra. This is combined with innovative algorithmic concepts for tomosynthesis reconstruction and synthetic mammograms (SMs)., Results: An X-ray tube with FFS was incorporated into a DBT system that performs 50-deg wide tomosynthesis scans with 25 projections in 4.85 s. Laboratory evaluations demonstrated significant improvements in the effective modular transfer function (eMTF). The improved eMTF as well as the effectiveness of the algorithmic concepts is shown in images from a clinical evaluation study., Conclusions: The DBT system concept enables high spatial resolution at short acquisition times. This leads to improved microcalcification visibility, reduced risk of motion artifacts, and shorter breast compression times. It shifts the in-plane resolution of DBT into the high-resolution range of FFDM. The presented technology leap might be a key contributor to facilitating the paradigm shift of replacing FFDM with DBT plus SM., (© 2024 The Authors.)

Background: Several studies indicate that people who stutter show greater variability in speech movements than people who do not stutter, even when the speech produced is perceptibly fluent. Speaking to the beat of a metronome reliably increases fluency in people who stutter, regardless of the severity of stuttering., Objectives: Here, we aimed to test whether metronome-timed speech reduces articulatory variability., Method: We analysed vocal tract MRI data from 24 people who stutter and 16 controls. Participants repeated sentences with and without a metronome. Midsagittal images of the vocal tract from lips to larynx were reconstructed at 33.3 frames per second. Any utterances containing dysfluencies or non-speech movements (e.g. swallowing) were excluded. For each participant, we measured the variability of movements (coefficient of variation) from the alveolar, palatal and velar regions of the vocal tract., Results: People who stutter had more variability than control speakers when speaking without a metronome, which was then reduced to the same level as controls when speaking with the metronome. The velar region contained more variability than the alveolar and palatal regions, which were similar., Conclusions: These results demonstrate that kinematic variability during perceptibly fluent speech is increased in people who stutter compared with controls when repeating naturalistic sentences without any alteration or disruption to the speech. This extends our previous findings of greater variability in the movements of people who stutter when producing perceptibly fluent nonwords compared with controls. These results also show, that in addition to increasing fluency in people who stutter, metronome-timed speech also reduces articulatory variability to the same level as that seen in control speakers., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Wiltshire et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

A microstructural informed thermodynamic model is utilized to tailor the pseudoelastic performance of a series of Fe-Mn-Al-Ni shape-memory alloys. Following this approach, the influence of the stability and the amount of the B2-ordered precipitates on the stability of the austenitic state and the pseudoelastic response is revealed. This is assessed by a combination of complementary nanoindentation measurements and incremental-strain tests under compressive loading. Based on these investigations, the applicability of the proposed models for the prediction of shape-memory capabilities of Fe-Mn-Al-Ni alloys is confirmed. Eventually, these thermodynamic considerations enable the guided enhancement of functional properties in this alloy system through the direct design of alloy compositions. The procedure proposed renders a significant advancement in the field of shape-memory alloys., (© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Alloys of the form (Mn 54 Al 44 C 2 ) 100-x Cu x (with x = 0, 1, 2, 4 and 6) were produced by induction melting. After homogenisation and quenching, most of the alloys consist entirely of the retained ε-phase, except for x = 6, in which the κ-phase was additionally present. After subsequent annealing, the alloys with x ≤ 2 consist entirely of a Cu-doped, ferromagnetic τ-phase, whereas the alloys with x > 2 additionally contain the κ-phase. The polarisation of the alloys at an applied field of 14 T decreases with increasing Cu-content, which is attributed i) to the dilution of the magnetic moment of the τ-phase unit cell by the Cu atoms, which do not carry a magnetic moment, and ii) at higher Cu-contents, to the formation of the κ-phase, which has a much lower polarisation than the τ-phase and therefore dilutes the net polarisation of the alloys. The Curie temperature was not affected by the Cu-additions. The stress needed to die-upset the alloys with x ≤ 2 was similar to that of the undoped alloy, whereas it was much lower for x = 4 and 6, due to the presence of intergranular layers of the κ-phase. The extrinsic magnetic properties of alloys with x ≤ 2 were improved by die-upsetting, whereas decomposition of the τ-phase during processing had a deleterious effect on the magnetic properties for higher Cu-additions.

The entropy of conduction electrons was evaluated utilizing the thermodynamic definition of the Seebeck coefficient as a tool. This analysis was applied to two different kinds of scientific questions that can-if at all-be only partially addressed by other methods. These are the field-dependence of meta-magnetic phase transitions and the electronic structure in strongly disordered materials, such as alloys. We showed that the electronic entropy change in meta-magnetic transitions is not constant with the applied magnetic field, as is usually assumed. Furthermore, we traced the evolution of the electronic entropy with respect to the chemical composition of an alloy series. Insights about the strength and kind of interactions appearing in the exemplary materials can be identified in the experiments.

Purpose: Talbot-Lau x-ray interferometry provides information about the scattering and refractive properties of an object - in addition to the object's attenuation features. Until recently, this method was ineligible for imaging human-sized objects as it is challenging to adapt Talbot-Lau interferometers (TLIs) to the relevant x-ray energy ranges. In this work, we present a preclinical Talbot-Lau prototype capable of imaging human-sized objects with proper image quality at clinically acceptable dose levels., Methods: The TLI is designed to match a setup of clinical relevance as closely as possible. The system provides a scan range of 120 × 30 cm 2 by using a scanning beam geometry. Its ultimate load is 100 kg. High aspect ratios and fine grid periods of the gratings ensure a reasonable setup length and clinically relevant image quality. The system is installed in a university hospital and is, therefore, exposed to the external influences of a clinical environment. To demonstrate the system's capabilities, a full-body scan of a euthanized pig was performed. In addition, freshly excised porcine lungs with an extrinsically provoked pneumothorax were mounted into a human thorax phantom and examined with the prototype., Results: Both examination sequences resulted in clinically relevant image quality - even in the case of a skin entrance air kerma of only 0.3 mGy which is in the range of human thoracic imaging. The presented case of a pneumothorax and a reader study showed that the prototype's dark-field images provide added value for pulmonary diagnosis., Conclusion: We demonstrated that a dedicated design of a Talbot-Lau interferometer can be applied to medical imaging by constructing a preclinical Talbot-Lau prototype. We experienced that the system is feasible for imaging human-sized objects and the phase-stepping approach is suitable for clinical practice. Hence, we conclude that Talbot-Lau x-ray imaging has potential for clinical use and enhances the diagnostic power of medical x-ray imaging., (© 2018 American Association of Physicists in Medicine.)

In this study, the effect of thermomechanical processing on microstructure evolution of the indium-containing β-type Ti alloys (Ti-40Nb)-3.5In and (Ti-36Nb)-3.5In was examined. Both alloys show an increased β-phase stability compared to binary alloys due to In additions. This leads to a reduced α''-phase fraction in the solution treated and recrystallized state in the case of (Ti-36Nb)-3.5In and to the suppression of stress-induced α'' formation and deformation twinning for (Ti-40Nb)-3.5In. The mechanical properties of the alloys were subsequently studied by quasistatic tensile tests in the recrystallized state, revealing reduced Young's modulus values of 58GPa ((Ti-40Nb)-3.5In) and 56GPa ((Ti-36Nb)-3.5In) compared to 60GPa as determined for Ti-40Nb. For both In-containing alloys the ultimate tensile strength is in the range of 560MPa. Due to the suppressed α'' formation, (Ti-40Nb)-3.5In exhibits a linear elastic deformation behavior during tensile loading together with a low Young's modulus and is therefore promising for load-bearing implants., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Different hardening strategies were evaluated regarding their potential to improve the mechanical biofunctionality of the cast and solution-treated low modulus β-Ti alloy Ti 40Nb. The strategies are based on thermomechanical treatments comprised of different hot- and cold-rolling steps, as well as annealing treatments aiming at the successive exploitation of different hardening mechanisms (grain boundary hardening, work hardening and precipitation hardening). Quasi-static tensile testing revealed that grain refinement by one order of magnitude has only a small impact on improving the mechanical biofunctionality of Ti-40Nb. However, work hardening effectively improves the tensile strength by 30% to a value of 650MPa, while retaining Young׳s modulus at 60GPa. The α-phase precipitation hardening was verified to have an increasing effect on both, strength and Young׳s modulus. Thereby, the change of Young׳s modulus dominates the change of the strength, even at low α-phase fractions. The pseudo-elastic behavior of Ti 40Nb is discussed under consideration of the microstructural changes due to the thermomechanical treatment. The texture changes evolving upon cold-rolling markedly influence the recrystallization behavior. However, the present results do not show a significant effect of the texture on the mechanical properties of Ti-40Nb., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The correlation between the microstructure and mechanical behavior during tensile loading of Ti68.8Nb13.6Al6.5Cu6Ni5.1 and Ti71.8Nb14.1Al6.7Cu4Ni3.4 alloys was investigated. The present alloys were prepared by the non-equilibrium processing applying relatively high cooling rates. The microstructure consists of a dendritic bcc β-Ti solid solution and fine intermetallic precipitates in the interdendritic region. The volume fraction of the intermetallic phases decreases significantly with slightly decreasing the Cu and Ni content. Consequently, the fracture mechanism in tension changes from cleavage to shear. This in turn strongly enhances the ductility of the alloy and as a result Ti71.8Nb14.1Al6.7Cu4Ni3.4 demonstrates a significant tensile ductility of about 14% combined with the high yield strength of above 820 MPa already in the as-cast state. The results demonstrate that the control of precipitates can significantly enhance the ductility and yet maintaining the high strength and the low Young's modulus of these alloys. The achieved high bio performance (ratio of strength to Young's modulus) is comparable (or even superior) with that of the recently developed Ti-based biomedical alloys., (© 2013.)

Hospital leaders can take four strategic steps to ensure their IT systems are prepared to meet the requirements of healthcare reform: Examine the extent to which current IT system capacity is sufficient to meet future demands. Create a solid foundation for expanding IT capabilities or implementing a new IT system. Share ownership and accountability for IT development and implementation with end users. Reconsider the value of third-party solutions.

Having succeeded in the fabrication of epitaxial superconducting LaFeAsO(1-x)F(x) thin films we performed an extensive study of electrical transport properties. In the face of multiband superconductivity we can demonstrate that an anisotropic Ginzburg-Landau scaling of the angular dependent critical current densities can be adopted, although being originally developed for single band superconductors. In contrast with single band superconductors the mass anisotropy of LaFeAsO(1-x)F(x) is temperature dependent. A very steep increase of the upper critical field and the irreversibility field can be observed at temperatures below 6 K, indicating that the band with the smaller gap is in the dirty limit. This temperature dependence can be theoretically described by two dominating bands responsible for superconductivity. A pinning force scaling provides insight into the prevalent pinning mechanism and can be specified in terms of the Kramer model., (© 2011 American Physical Society)

Superconducting LaFeAsO1-xFx thin films were grown on single crystalline LaAlO3 substrates with critical temperatures (onset) up to 28 K. Resistive measurements in high magnetic fields up to 40 T reveal a paramagnetically limited upper critical field mu{0}H{c2}(0) around 77 T and a remarkable steep slope of -6.2 T K-1 near T{c}. From transport measurements we observed weak-link behavior in low magnetic fields and evidence for a broad reversible regime.

We report upper critical field Bc2(T) data for disordered (arsenic-deficient) LaO0.9F0.1FeAs1-delta in a wide temperature and magnetic field range up to 47 T. Because of the large linear slope of Bc2 approximately -5.4 to -6.6 T/K near Tc approximately 28.5 K, the T dependence of the in-plane Bc2(T) shows a flattening near 23 K above 30 T which points to Pauli-limited behavior with Bc2(0) approximately 63-68 T. Our results are discussed in terms of disorder effects within [corrected] unconventional superconducting pairings.

The future demands of computed tomography imaging regarding the x-ray source can be summarized with higher scan power, shorter rotation times, shorter cool down times and smaller focal spots. We report on a new tube technology satisfying all these demands by making use of a novel cooling principle on one hand and of a novel beam control system on the other hand. Nowadays tubes use a rotating anode disk mainly cooled via radiation. The Straton x-ray tube is the first tube available for clinical routine utilizing convective cooling exclusively. It is demonstrated that this cooling principle makes large heat storage capacities of the anode disk obsolete. The unprecedented cooling rate of 4.8 MHU/min eliminates the need for waiting times due to anode cooling in clinical workflow. Moreover, an electronic beam deflection system for focal spot position and size control opens the door to advanced applications. The physical backgrounds are discussed and the technical realization is presented. From this discussion the superior suitability of this tube to withstand g-forces well above 20 g created by fast rotating gantries will become evident. Experience from a large clinical trial is reported and possible ways for future developments are discussed.

Parametric x rays (PXR) produced by bombarding silicon and diamond crystals with electrons of 30 to 87 MeV were detected at 180 degrees relative to the direction of the electron beam. It was found that the dependence of the intensity on the orientation of the crystal agrees with the predictions of the kinematical theory of PXR. The absolute intensity is twice as large as predicted. These findings can be explained considering dynamical effects that govern the x-ray crystal interaction. Additionally, x rays caused by self-diffracted transition radiation have been observed.