Search

Summary For neutral intramolecular circuits with two constitutionally identical branches, a maximum 4-fold increase in total conductance can be obtained according to constructive quantum interference (CQI). For charged intramolecular circuits, however, the strong electrostatic interactions entangle the quantum states of these two parallel pathways, thus introducing complicated transport behavior that warrants experimental investigation of the intramolecular circuit rules. Here, we report that a tetracationic cyclophane with parallel channels exhibits a 50-fold conductance enhancement compared with that of a single-channel control, an observation that supplements intramolecular circuit law in systems with strong Coulombic interactions. Flicker noise measurements and theoretical calculations show that strong electrostatic interactions between charged parallel channels—serving as the chemical gate to promote the effective conductance of each channel—and CQI boosts the total conductance of the two-channel circuit. The molecular design presented herein constitutes a proof-of-principle approach to charged intramolecular circuits that are desirable for quantum circuits and devices.

A class of γ-cyclodextrin-containing hybrid frameworks (CD-HFs) has been synthesized, employing γ-cyclodextrin (γ-CD) as the primary building blocks, along with 4-methoxysalicylate (4-MS-) anions as the secondary building blocks. CD-HFs are constructed through the synergistic exploitation of coordinative, electrostatic, and dispersive forces. The syntheses have been carried out using an organic counteranion co-assembly strategy, which allows for the introduction of 4-MS-, in place of inorganic OH-, into the cationic γ-CD-containing metal-organic frameworks (CD-MOFs). Although the packing arrangement of the γ-CD tori in the solid-state superstructure of CD-HFs is identical to that of the previously reported CD-MOFs, CD-HFs crystallize with lower symmetry and in the cuboid space group P43212-when compared to CD-MOF-1, which has the cubic unit cell of I432 space group-on account of the chiral packing of the 4-MS- anions in the CD-HF superstructures. Importantly, CD-HFs have ultramicroporous apertures associated with the pore channels, a significant deviation from CD-MOF-1, as a consequence of the contribution from the 4-MS- anions, which serve as supramolecular baffles. In gas adsorption-desorption experiments, CD-HF-1 exhibits a Brunauer-Emmett-Teller (BET) surface area of 306 m2 g-1 for CO2 at 195 K, yet does not uptake N2 at 77 K, confirming the difference in porosity between CD-HF-1 and CD-MOF-1. Furthermore, the 4-MS- anions in CD-HF-1 can be exchanged with OH- anions, leading to an irreversible single-crystal to single-crystal transformation, with rearrangement of coordinated metal ions. Reversible transformations were also observed in CD-MOF-1 when OH- ions were exchanged for 4-MS- anions, with the space group changing from I432 to R32. This organic counteranion co-assembly strategy opens up new routes for the construction of hybrid frameworks, which are inaccessible by existing de novo MOF assembly methodologies.

Aqueous rechargeable zinc batteries (ZBs) have received considerable attention recently for large-scale energy storage systems in terms of rate performance, cost, and safety. Nevertheless, these ZBs still remain a subject for investigation, as researchers search for cathode materials enabling high performance. Among the various candidate cathode materials for ZBs, quinone compounds stand out as candidates because of their high specific capacity, sustainability, and low cost. Quinone-based cathodes, however, suffer from the critical limitation of undergoing dissolution during battery cycling, leading to a deterioration in battery life. To address this problem, we have introduced a redox-active triangular phenanthrenequinone-based macrocycle (PQ-Δ) with a rigid geometry and layered superstructure. Notably, we have confirmed that Zn2+ ions, together with H2O molecules, can be inserted into the PQ-Δ organic cathode, and, as a consequence, the interfacial resistance between the cathode and electrolytes is decreased effectively. Density functional theory calculations have revealed that the low interfacial resistance can be attributed mainly to decreasing the desolvation energy penalty as a result of the insertion of hydrated Zn2+ ions in the PQ-Δ cathode. The combined effects of the insertion of hydrated Zn2+ ions and the robust triangular structure of PQ-Δ serve to achieve a large reversible capacity of 210 mAh g-1 at a high current density of 150 mA g-1, along with an excellent cycle-life, that is, 99.9% retention after 500 cycles. These findings suggest that the utilization of electron-active organic macrocycles, combined with the low interfacial resistance associated with the solvation of divalent carrier ions, is essential for the overall performance of divalent battery systems.

Although host–guest pairing interactions between bisradical dicationic cyclobis(paraquat-p-phenylene) (BB2(˙+)) and the bipyridinium radical cation (BIPY˙+) have been studied extensively, host molecules other than BB2(˙+) are few and far between., Although host–guest pairing interactions between bisradical dicationic cyclobis(paraquat-p-phenylene) (BB2(˙+)) and the bipyridinium radical cation (BIPY˙+) have been studied extensively, host molecules other than BB2(˙+) are few and far between. Herein, four bisradical dicationic cyclophanes with tunable cavity sizes are investigated as new bisradical dicationic hosts for accommodating the methyl viologen radical cation (MV˙+) to form trisradical tricationic complexes. The structure–property relationships between cavity sizes and binding affinities have been established by comprehensive solution and solid-state characterizations as well as DFT calculations. The association constants of the four new trisradical tricationic complexes are found to range between 7400 and 170 000 M–1, with the strongest one being 4.3 times higher than that for [MV⊂BB]3(˙+). The facile accessibility and tunable stability of these new trisradical tricationic complexes make them attractive redox-controlled recognition motifs for further use in supramolecular chemistry and mechanostereochemistry.

Although catenanes comprising two ring-shaped components can be made in large quantities by templation, the preparation of three-dimensional (3D) catenanes with cage-shaped components is still in its infancy. Here, we report the design and syntheses of two 3D catenanes by a sequence of SN2 reactions in one pot. The resulting triply mechanically interlocked molecules were fully characterized in both the solution and solid states. Mechanistic studies have revealed that a suit[3]ane, which contains a threefold symmetric cage component as the suit and a tribromide component as the body, is formed at elevated temperatures. This suit[3]ane was identified as the key reactive intermediate for the selective formation of the two 3D catenanes which do not represent thermodynamic minima. We foresee a future in which this particular synthetic strategy guides the rational design and production of mechanically interlocked molecules under kinetic control.

Artificial molecular pumps (AMPs), inspired by the active cellular transport exhibited in biological systems, enable cargoes to undergo unidirectional motion, courtesy of molecular ratchet mechanisms in the presence of energy sources. Significant progress has been achieved, using alternatively radical interactions and Coulombic repulsive forces to create working AMPs. In an attempt to widen the range of these AMPs, we have explored the effect of molecular pumping on the photophysical properties of a collecting chain on a dumbbell incorporating a centrally located pyrene fluorophore and two terminal pumping cassettes. The AMP discussed here sequesters two tetracationic cyclophanes from the solution, generating a [3]rotaxane in which the fluorescence of the dumbbell is quenched. The research reported in this Article demonstrates that the use of pumping cassettes allows us to generate the [3]rotaxane in which the photophysical properties of fluorophores can be modified in a manner that cannot be achieved with a mixture of the dumbbell and ring components of the rotaxane on account of their weak binding in solution.

Single-molecule electronics is a sub-field ofnanoelectronicsin which individual devices are formed from single molecules placed between source and drain electrodes. During the past few years, scientists have demonstrated that the flow of electricity through these devices is controlled by quantum interference (QI) between electrons passing from source to drain. Their future development, however, is hampered by difficulties in controlling interference effects. Herein, we demonstrate that electron transport in tetracationic cyclophane circuits is mediated by QI between channels formed from two lowest unoccupied molecular orbitals (LUMOs), while their highest occupied molecular orbitals (HOMOs) play no significant role. Energy differences between these two LUMO channels induce constructive interference, leading to high conductance. By contrast, phase differences between these LUMO channels result in destructive interference and a suppression in overall conductance. Such a design of single-molecule circuits enables the construction of single-molecule conductors and insulators based on a single cyclophane platform.

Nanographenes have kindled considerable interest in the fields of materials science and supramolecular chemistry as a result of their unique self-assembling and optoelectronic properties. Encapsulating the contorted nanographenes inside artificial receptors, however, remains challenging. Herein, we report the design and synthesis of a trigonal prismatic hexacationic cage, which has a large cavity and adopts a relatively flexible conformation. It serves as a receptor, not only for planar coronene, but also for contorted nanographene derivatives with diameters of approximately 15 Å and thicknesses of 7 Å. A comprehensive investigation of the host-guest interactions in the solid, solution and gaseous states by experimentation and theoretical calculations reveals collectively an induced-fit binding mechanism with high binding affinities between the cage and the nanographenes. Notably, the photostability of the nanographenes is improved significantly by the ultrafast deactivation of their excited states within the cage. Encapsulating the contorted nanographenes inside the cage provides a noncovalent strategy for regulating their photoreactivity., Encapsulating large and contorted nanographenes inside artificial receptors remain challenging. This work reports the synthesis, characterization and binding properties of a trigonal prismatic cage compound that can serve as a receptor for contorted nanographene derivatives.

The design and synthesis of artificial molecular switches (AMSs) displaying architectures of increased complexity would constitute significant progress in meeting the challenging task of realizing artificial molecular machines (AMMs). Here, we report the synthesis and characterization of a molecular shuttle composed of a cyclobis(paraquat-4,4'-biphenylene) cyclophane ring and a dumbbell incorporating a cyclobis(paraquat

A series of donor-acceptor (D-A) naphthalene-viologen-based cyclophanes of different shapes, sizes, and symmetries have been synthesized and characterized. Solution optical studies on these cyclophanes reveal the existence of photoinduced intramolecular charge transfer (CT) at 465 nm from naphthalene (D) to viologen (A) units, resulting in a conformational change in the viologen units and the emergence of an emission at 540 nm. The D-A cyclophanes with box-like and hexagon-like shapes offer an opportunity to control the arrangement within 2D layers where D-A interactions direct the superstructures. While a box-like 2,6-disubstituted naphthalene-based tetracationic cyclophane does not form square tiling patterns, a truncated hexagon-like congener self-assembles to form a hexagonal superstructure which, in turn, adopts a hexagonal tiling pattern. Tessellation of the more rigid and highly symmetrical 2,7-disubstituted naphthalene-based cyclophanes leads to the formation of 2D square and honeycomb tiling patterns with the box-like and hexagon-like cyclophanes, respectively. Co-crystallization of the box-like cyclophanes with tetrathiafulvalene (TTF) results in the formation of D-A CT interactions between TTF and viologen units, leading to tubular superstructures. Co-crystallization of the hexagon-like cyclophane with TTF generates well-ordered and uniform tubular superstructures in which the TTF-viologen CT interactions and naphthalene-naphthalene [π···π] interactions propagate with 2D topology. In the solid state, the TTF-cyclophane co-crystals are paramagnetic and display dual intra- and intermolecular CT behavior at ∼470 and ∼1000 nm, respectively, offering multi-responsive materials with potential pathways for electron transport.

Organic radicals are of importance in developing smart materials that have paramagnetic and/or near-infrared optical properties. Their practical applications, however, are limited by the labile nature of the radicals. Here, we demonstrate that by using a tetracationic cyclophane, namely, cyclobis(4,4'-(1,4-phenylene)bispyridine-p-phenylene) (ExBox4+), to encapsulate a naphthalenediimide (NDI) guest, the redox properties of NDI can be modulated. In organic solvents such as MeCN or DMF, ExBox4+ is able to provide the surrounding Coulombic attraction to the NDI•- radical anion and therefore enhance its stability toward oxidation. In water, NDI•- is prone to dimerization, forming its (NDI•-)2 dimer. Under UV-light irradiation, the (NDI•-)2 dimer is observed to disproportionate and yield the dianionic NDI2-. ExBox4+ is able to encapsulate the NDI•- radical anion and prevent its dimerization, and as a consequence, the radical anion is protected from further reduction in a noncovalent manner. We believe that our strategy of modulating the redox properties of NDI by either host-guest recognition or mechanical interlocking can aid and abet the development of radical-based materials, which could be employed in pursuit of applications in many areas, such as transporting spin and charges.

Allomelanin is a type of nitrogen-free melanin most commonly found in fungi. Its existence enhances resistance of the organisms to environmental damage and helps fungi survive harsh radiation conditions such as those found on spacecraft and inside contaminated nuclear power plants. We report the preparation and characterization of artificial allomelanin nanoparticles (AMNPs) via oxidative oligomerization of 1,8-dihydroxynaphthalene (1,8-DHN). We describe the resulting morphological and size control of AMNPs and demonstrate that they are radical scavengers. Finally, we show that AMNPs are taken up by neonatal human epidermal keratinocytes and packaged into perinuclear caps where they quench reactive oxygen species generated following UV exposure.

Summary Sophisticated architectures assembled from a single class of subunits by cooperative interactions are ubiquitous in nature. The construction of their artificial mimics, however, remains one of the most formidable challenges facing synthetic chemists. Here, we report a hierarchical diamondoid superstructure—namely, a supramolecular diamond—that is constructed from the multiple-level self-assembly of a highly symmetrical salt, hexakis[(4,4′-bipyridin-1-ium)methylene]benzene hexafluorophosphate. The uniform octahedral single crystals, with 96 cationic organic fragments and 96 counteranions in a unit cell, can be prepared quantitatively in a controllable one-step procedure within seconds at ambient conditions. The sizes of the resulting samples are modulated from 280 nm to 660 μm. The mechanism of the self-assembly was elucidated at the atomic level. As proof of its intrinsically cationic superstructure with mobile anions, the three-dimensional nanoporous framework can exchange efficiently with metal oxoanions. This research shows that precisely tunable hierarchical assemblies can translate charged molecules into complicated architectures.

Mechanically interlocked molecules (MIMs), such as rotaxanes, catenanes, and molecular knots, have attracted significant interest because of their unique properties originating from their mechanically bonded components. Recently, MIMs have been employed in increasingly diverse architectures thanks to the tools of rational molecular design and the ability to incorporate functions in a precise manner. Here, we discuss advances in MIM synthesis, the fundamental understanding of their working processes, and applications exploiting their singular behavior. This review covers some of the most recent studies demonstrating the widespread interest in MIMs by scientists pursuing the ultimate goal of designing functional molecular machines that surpass their natural analogs or exhibit unprecedented properties.

Lateral interactions enhance the guest inclusion and peripheral complexation within a highly charged covalent cage., A hexacationic triangular covalent organic cage, AzaEx2Cage6+, has been synthesized by means of a tetrabutylammonium iodide-catalyzed SN2 reaction. The prismatic cage is composed of two triangular 2,4,6-triphenyl-1,3,5-triazine (TPT) platforms bridged face-to-face by three 4,4′-bipyridinium (BIPY2+) spacers. The rigidity of these building blocks leads to a shape-persistent cage cavity with an inter-platform distance of approximately 11.0 Å. This distance allows the cage to accommodate two aromatic guests, each of which is able to undergo π–π interactions with one of the two TPT platform simultaneously, in an A–D–D–A manner. In the previously reported prism-shaped cage, the spacers (pillars) are often considered passive or non-interactive. In the current system, the three BIPY2+ spacers are observed to play an important role in guest recognition. Firstly, the BIPY2+ spacers are able to interact with the carbonyl group in a pyrene-1-carbaldehyde (PCA) guest, by introducing lateral dipole–cation or dipole–dipole interactions. As a consequence, the binding affinity of the cage towards the PCA guest is significantly larger than that of pyrene as the guest, even although the latter is often considered to be a better π-electron donor. Secondly, in the case of the guest 1,5-bis[2-(2-(2-(2-hydroxyethoxy)ethoxy)ethoxy)ethoxy]naphthalene (BH4EN), the pillars can provide higher binding forces compared to the TPT platform. Hence, peripheral complexation occurs when AzaEx2Cage6+ accommodates BH4EN in MeCN. Thirdly, when both PCA and BH4EN are added into a solution of AzaEx2Cage6+, inclusion and peripheral complexation occur simultaneously to PCA and BH4EN respectively, even though the accommodation of the former guest seems to attenuate the external binding of the latter. This discovery of the importance of lateral interactions highlights the relationship between the electrostatic properties of a highly charged host and its complexation behavior, and as such, provides insight into the design of more complex hosts that bind guests in multiple locations and modes.

For the most part, enzymes contain one active site wherein they catalyze in a serial manner chemical reactions between substrates both efficiently and rapidly. Imagine if a situation could be created within a chiral porous crystal containing trillions of active sites where substrates can reside in vast numbers before being converted in parallel into products. Here, we report how it is possible to incorporate 1-anthracenecarboxylate (1-AC-) as a substrate into a γ-cyclodextrin-containing metal-organic framework (CD-MOF-1), where the metals are K+ cations, prior to carrying out [4+4] photodimerizations between pairs of substrate molecules, affording selectively one of four possible regioisomers. One of the high-yielding regioisomers exhibits optical activity as a result of the presence of an 8:1 ratio of the two enantiomers following separation by high-performance liquid chromatography. The solid-state superstructure of 1-anthracenecarboxylate potassium salt (1-ACK), which is co-crystallized with γ-cyclodextrin, reveals that pairs of substrate molecules are not only packed inside tunnels between spherical cavities present in CD-MOF-1, but also stabilized-in addition to hydrogen-bonding to the C-2 and C-3 hydroxyl groups on the d-glucopyranosyl residues present in the γ-cyclodextrin tori-by combinations of hydrophobic and electrostatic interactions between the carboxyl groups in 1-AC- and four K+ cations on the waistline between the two γ-cyclodextrin tori in the tunnels. These non-covalent bonding interactions result in preferred co-conformations that account for the highly regio- and enantioselective [4+4] cycloaddition during photoirradiation. Theoretical calculations, in conjunction with crystallography, support the regio- and stereochemical outcome of the photodimerization.

Colored charge-transfer complexes can be formed by the association between electron-rich donor and electron-deficient acceptor molecules, bringing about the narrowing of HOMO-LUMO energy gaps so that they become capable of harnessing visible light. In an effort to facilitate the use of these widespread, but nonetheless weak, interactions for visible light photocatalysis, it is important to render the interactions strong and robust. Herein, we employ a well-known donor-acceptor [2]catenane-formed by the mechanical interlocking of cyclobis(paraquat-p-phenylene) and 1,5-dinaphtho[38]crown-10-in which the charge-transfer interactions between two 4,4'-bipyridinium and two 1,5-dioxynaphthalene units are enhanced by mechanical bonding, leading to increased absorption of visible light, even at low concentrations in solution. As a result, since this [2]catenane can generate persistent bipyridinium radical cations under continuous visible-light irradiation without the need for additional photosensitizers, it can display good catalytic activity in both photo-reductions and -oxidations, as demonstrated by hydrogen production-in the presence of platinum nanoparticles-and aerobic oxidation of organic sulfides, such as l-methionine, respectively. This research, which highlights the usefulness of nanoconfinement present in mechanically interlocked molecules for the reinforcement of weak interactions, can not only expand the potential of charge-transfer interactions in solar energy conversion and synthetic photocatalysis but also open up new possibilities for the development of active artificial molecular shuttles, switches, and machines.

Supramolecular assembly is a promising bottom-up approach for producing materials that behave as charge transporting components in electronic devices. Although extensive advances have been made during the past two decades, formidable challenges exist in controlling the local randomness present in supramolecular assemblies. Here, a temperature-triggered supramolecular assembly strategy using heat to heal defects and disorders is reported. The central concept of the molecular design-named the "Tetris strategy" in this research-is to: i) increase the rotational freedom of the molecules through thermal perturbation, ii) induce conformation-fitting of adjacent molecules through two different kinds of intermolecular [π···π] interactions, and finally iii) lock the nearby molecules in inactive co-conformations. Experimentally, upon heating to 57 °C, amorphous solid-state films undergo spontaneous assembly, leading to the growth of uniform and highly ordered microwire arrays. Temperature-triggered supramolecular assembly provides an approach closer to the precision control of assembled structures and presents with a broad canvas to work on in approaching a new generation of supramolecular electronics. Tetris is a registered trademark of Tetris Holding, LLC, used with permission.

The coordination-driven self-assembly of organometallic half-sandwich iridium(III)- and rhodium(III)-based building blocks with asymmetric ambidentate pyridyl-carboxylate ligands is described. Despite the potential for obtaining a statistical mixture of multiple products, D

The interaction of low-energy light with matter that leads to the production of high-energy light is known as photon upconversion. This phenomenon is of importance because of its potential applications in optoelectronics, energy harvesting, and the biomedical arena. Herein, we report a pillared-paddlewheel metal-organic framework (MOF), constructed from a tetrakis(4-carboxyphenyl)porphyrin sensitizer and a dipyridyl thiazolothiazole annihilator, designed for efficient triplet-triplet annihilation upconversion (TTA-UC). Single-crystal X-ray diffraction studies reveal that the Zn-metalated sensitizers are coordinated to Zn2 nodes in a paddlewheel fashion, forming 2D sheets, to which are linked annihilators, such that each sensitizer is connected to five of them. The precise arrangements of sensitizers with respect to annihilators, and the high annihilator-to-sensitizer ratio, facilitate Dexter energy transfer. This level of organization in an extended structure leads to a high TTA-UC efficiency of 1.95% (theoretical maximum = 50%) at an excitation power density of 25 mW cm-2.

Macrocycles that assemble into nanotubes exhibit emergent properties stemming from their low dimensionality, structural regularity, and distinct interior environments. Here, we report a versatile strategy to synthesize diverse nanotube structures in a single, efficient reaction by using a conserved building block bearing a pyridine ring. Imine condensation of a 2,4,6-triphenylpyridine-based diamine with various aromatic dialdehydes yields chemically distinct pentagonal [5+5], hexagonal [3+3], and diamond-shaped [2+2] macrocycles depending on the substitution pattern of the aromatic dialdehyde monomer. Atomic force microscopy and in solvo X-ray diffraction demonstrate that protonation of the macrocycles under the mild conditions used for their synthesis drives assembly into high-aspect ratio nanotubes. Each of the pyridine-containing nanotube assemblies exhibited measurable proton conductivity by electrochemical impedance spectroscopy, with values as high as 10-3 S m-1 (90% R.H., 25°C) that we attribute to differences in their internal pore sizes. This synthetic strategy represents a general method to access robust nanotube assemblies from a universal pyridine-containing monomer, which will enable systematic investigations of their emergent properties.

The charge transport in single-molecule junctions depends critically on the chemical identity of the anchor groups that are used to connect the molecular wires to the electrodes. In this research, we report a new anchoring strategy, called the electrostatic anchor, formed through the efficient Coulombic interaction between the gold electrodes and the positively charged pyridinium terminal groups. Our results show that these pyridinium groups serve as efficient electrostatic anchors forming robust gold-molecule-gold junctions. We have also observed binary switching in dicationic viologen molecular junctions, demonstrating an electron injection-induced redox switching in single-molecule junctions. We attribute the difference in low- and high-conductance states to a dicationic ground state and a radical cationic metastable state, respectively. Overall, this anchoring strategy and redox-switching mechanism could constitute the basis for a new class of redox-activated single-molecule switches.

Cyclodextrin-based metal-organic frameworks (CD-MOFs), derived from γ-cyclodextrin (γ-CD) and alkali metal cations, constitute a class of porous, renewable, and edible MOFs that can be synthesized from a naturally occurring carbohydrate on a large scale. γ-CD is a C8-symmetrical cyclic oligosaccharide composed of eight asymmetric α-1,4-linked d-glucopyranosyl residues that possesses a bucket-shaped cavity with an inner diameter of ∼1 nm and a depth of ∼0.8 nm. Upon combination of 1 equiv of γ-CD with 8 equiv of potassium hydroxide in an aqueous solution, followed by vapor diffusion of MeOH (or EtOH) into this solution during several days, CD-MOF-1 is obtained as cubic crystals. This carbohydrate-based MOF, which was discovered serendipitously in 2010, was the first highly crystalline CD-MOF to be obtained. X-ray crystallography of a single crystal reveals that it adopts the space group I432 with unit cell dimensions of approximately 31 × 31 × 31 A3. Other CD-MOFs, namely, CD-MOF-2 and CD-MOF-3, can be obtained when potassium ions are replaced by rubidium and cesium ions, respectively. CD-MOFs comprise extended body-centered frameworks of (γ-CD)6 cubic units, which contain spherical pores that reside at the center of the cubes, interconnected by alkali metal cations, forming both cylindrical and triangular channels.During the past decade, CD-MOFs have emerged as a useful class of multifunctional materials based on porous frameworks with extended structures displaying robust crystallinity, permanent porosity, and excellent biocompatibility. The family of CD-MOFs has been joined by a growing collection of metal nodes involving alkali metal cations (Li+, Na+, K+, Rb+, Cs+) and γ-CD as well as its derivatives. As a result of the ability of their extended porous frameworks to absorb guest molecules, including gases, drugs, metal-based nanoclusters, and nanoparticles, CD-MOFs have potential applications in areas as disparate as templating syntheses of metal-based nanoparticles and gels, adsorption and separation, trapping highly reactive intermediates, catalyst supports, sensing, electrical memory, and drug delivery.In this Account, we tell the story of CD-MOFs, a scientific discovery made in our research laboratory at Northwestern University, and the opportunities to use these environmentally friendly porous materials across different fields of science and technology. The story includes representative synthetic protocols for the preparation of CD-MOFs, along with an overview of their structural features, functionalization, and chemical modification aimed at increasing their stabilities in aqueous environments, and finally, a summary of their applications. The examples we will discuss, however, are only illustrative, and there is a significant body of additional findings emanating from our laboratory and others, especially in the realm of developing new synthetic strategies, tuning the framework stabilities, and exploring the guest inclusion and emergent properties of CD-MOFs. We refer readers to the original communications, papers, and reviews cited herein. We hope that, in the telling of the story of CD-MOFs, this Account may promote new scientific discoveries and further development of CD-MOF-based technologies in the future.

The development of synthetic receptors that recognize carbohydrates in water with high selectivity and specificity is challenging on account of their structural complexity and strong hydrophilicity. Here, we report on the design and synthesis of two pyrene-based, temple receptors for the recognition of a range of common sugars in water. These receptors rely on the use of two parallel pyrene panels, which serve as roofs and floors, capable of forming multiple [C–H•••π] interactions with the axially oriented C–H bonds on glycolpyranosyl rings in the carbohydrate-based substrates. In addition, 8 polarized pyridinium C–H bonds, projecting from the roofs and floors of the temple receptors toward the binding cavities, form [C–H•••O] hydrogen bonds with the equatorially oriented OH groups on the sugars located inside the hydrophobic cavities. Four para -xylylene pillars play a crucial role in controlling the distance between the roof and floor. These temple receptors are highly selective for the binding of glucose and its derivatives. Furthermore, they show enhanced fluorescence upon binding with glucose in water, a property which could be integrated into glucose-sensing devices.

The digital revolution sets a milestone in the progressive miniaturization of working devices and in the underlying advent of molecular machines. Foldamers involving mechanically entangled components with modular secondary structures are among the most promising designs for molecular switch‐based applications. Characterizing the nature and dynamics of their intramolecular network following the application of a stimulus is the key to their performance. Here, we use non‐dissociative electron transfer as a reductive stimulus in the gas phase and probe the consecutive co‐conformational transitions of a donor‐acceptor oligorotaxane foldamer using electrospray mass spectrometry interfaced with ion mobility and infrared ion spectroscopy. A comparison of collision cross section distributions for analogous closed‐shell and radical molecular ions sheds light on their respective formation energetics, while variations in their respective infrared absorption bands evidence changes in intramolecular organization as the foldamer becomes more compact. These differences are compatible with the advent of radical‐pairing interactions., Gas‐phase non‐dissociative electron transfer is used for charge reduction of a donor‐acceptor oligorotaxane foldamer (green). The consecutive co‐conformational transition is monitored using ion mobility spectrometry and infrared ion spectroscopy. Comparing the collision cross section distributions (blue) and infrared spectra (red) recorded for analogous closed‐shell and radical systems highlights differences that can be attributed to radical‐pairing interactions.

We report the molecular recognition of the Au(CN)2- anion, a crucial intermediate in today's gold mining industry, by α-cyclodextrin. Three X-ray single-crystal superstructures-KAu(CN)2⊂α-cyclodextrin, KAu(CN)2⊂(α-cyclodextrin)2, and KAg(CN)2⊂(α-cyclodextrin)2-demonstrate that the binding cavity of α-cyclodextrin is a good fit for metal-coordination complexes, such as Au(CN)2- and Ag(CN)2- with linear geometries, while the K+ ions fulfill the role of linking α-cyclodextrin tori together as a result of [K+···O] ion-dipole interactions. A 1:1 binding stoichiometry between Au(CN)2- and α-cyclodextrin in aqueous solution, revealed by 1H NMR titrations, has produced binding constants in the order of 104 M-1. Isothermal calorimetry titrations indicate that this molecular recognition is driven by a favorable enthalpy change overcoming a small entropic penalty. The adduct formation of KAu(CN)2⊂α-cyclodextrin in aqueous solution is sustained by multiple [C-H···π] and [C-H···anion] interactions in addition to hydrophobic effects. The molecular recognition has also been investigated by DFT calculations, which suggest that the 2:1 binding stoichiometry between α-cyclodextrin and Au(CN)2- is favored in the presence of ethanol. We have demonstrated that this molecular recognition process between α-cyclodextrin and KAu(CN)2 can be applied to the stripping of gold from the surface of activated carbon at room temperature. Moreover, this stripping process is selective for Au(CN)2- in the presence of Ag(CN)2-, which has a lower binding affinity toward α-cyclodextrin. This molecular recognition process could, in principle, be integrated into commercial gold-mining protocols and lead to significantly reduced costs, energy consumption, and environmental impact.

Francois Nico Diederich, an iconic organic chemist who innovated and created in the fields of molecular recognition and host–guest chemistry, new allotropes of carbon and novel carbon-rich molecules, and drug activity and design, passed away on September 23, 2020 in Zurich, Switzerland at the age of 68, after battling an aggressive cancer. Francois N. Diederich. Reproduced with permission from ref. 1. Francois Diederich in the Chemistry Library at UCLA, 1980. Image credit: Marion C. Peters (Librarian Emeritus, University of California, Los Angeles, CA). Francois and Georgine Diederich at UCLA in 2019. Image credit: Penny Jennings (University of California, Los Angeles, CA). A proud native of Luxembourg, Diederich became known the world over both for his chemical discoveries and for his warm, lively, and interactive personality. Educated first in Luxembourg and then earning his diploma and doctorate at the University of Heidelberg, Germany with Heinz Staab, Diederich gained early fame for the first synthesis in 1978 of a hydrocarbon that Staab had named “Kekulene” to honor the discoverer of the structure of benzene. Kekulene, containing 12 fused benzene rings in a planar circular structure, was resynthesized and studied by single-molecule imaging in 2019, and found to have the structural details predicted by Diederich and Staab. By conquering the synthesis of this molecule, Diederich became enamored of carbon-rich molecules that he studied throughout his career. Diederich was a postdoctoral fellow with Orville L. Chapman at the University of California, Los Angeles (UCLA) from 1979 to 1981, and had fruitful interactions with Donald Cram, UCLA professor, who was on his way to the Nobel Prize in 1987 for host–guest chemistry. This field was another one in which Diederich became a world leader. Both of us (K.N.H. and J.F.S.) had similarly memorable educational interactions with Cram (and with Diederich!) at various times in … [↵][1]1To whom correspondence may be addressed. Email: houk{at}chem.ucla.edu. [1]: #xref-corresp-1-1

The solid-state properties of organic radicals depend on radical-radical interactions that are influenced by the superstructure of the crystalline phase. Here, we report the synthesis and characterization of a substituted tetracationic cyclophane, cyclobis(paraquat-p-1,4-dimethoxyphenylene), which associates in its bisradical dicationic redox state with the methyl viologen radical cation (MV•+) to give a 1:1 inclusion complex. The (super)structures of the reduced cyclophane and this 1:1 complex in the solid state deviate from the analogous (super)structures observed for the reduced state of cyclobis(paraquat-p-phenylene) and that of its trisradical tricationic complex. Titration experiments reveal that the methoxy substituents on the p-phenylene linkers do not influence binding of the cyclophane toward small neutral guests-such as dimethoxybenzene and tetrathiafulvalene-whereas binding of larger radical cationic guests such as MV•+ by the reduced cyclophane decreases 10-fold. X-ray diffraction analysis reveals that the solid-state superstructure of the 1:1 complex constitutes a discrete entity with weak intermolecular orbital overlap between neighboring complexes. Transient nutation EPR experiments and DFT calculations confirm that the complex has a doublet spin configuration in the ground state as a result of the strong orbital overlap, while the quartet-state spin configuration is higher in energy and inaccessible at ambient temperature. Superconducting quantum interference device (SQUID) measurements reveal that the trisradical tricationic complexes interact antiferromagnetically and form a one-dimensional Heisenberg antiferromagnetic chain along the a-axis of the crystal. These results offer insights into the design and synthesis of organic magnetic materials based on host-guest complexes.

Semi-supervised learning has proved its efficacy in utilizing extensive unlabeled data to alleviate the use of a large amount of supervised data and improve model performance. Despite its tremendous potential, semi-supervised learning has yet to be implemented in the field of drug discovery. Empirical testing of drugs and their classification is costly and time-consuming. In contrast, predicting therapeutic applications of drugs from their structural formulas using semi-supervised learning would reduce costs and time significantly. Herein, we employ a new multicontrastive-based semi-supervised learning algorithm-MultiCon-for classifying drugs into 12 categories, according to therapeutic applications, on the basis of image analyses of their structural formulas. By rational use of data balancing, online augmentations of the drug image data during training, and the combined use of multicontrastive loss with consistency regularization, MultiCon achieves better class prediction accuracies when compared with the state-of-the-art machine learning methods across a variety of existing semi-supervised learning benchmarks. In particular, it performs exceptionally well with a limited number of labeled examples. For instance, with just 5000 labeled drugs in a PubChem (D3) data set, MultiCon achieved a class prediction accuracy of 97.74%.

No abstract available. published

One ring threaded by two other rings to form a non-intertwined ternary ring-in-rings motif is a challenging task in noncovalent synthesis. Constructing multicolor photoluminescence systems with tunable properties is also a fundamental research goal, which can lead to applications in multidimensional biological imaging, visual displays, and encryption materials. Herein, we describe the design and synthesis of binary and ternary ring-in-ring(s) complexes, based on an extended tetracationic cyclophane and cucurbit[8]uril. The formation of these complexes is accompanied by tunable multicolor fluorescence outputs. On mixing equimolar amounts of the cyclophane and cucurbit[8]uril, a 1:1 ring-in-ring complex is formed as a result of hydrophobic interactions associated with a favorable change in entropy. With the addition of another equivalent of cucurbit[8]uril, a 1:2 ring-in-rings complex is formed, facilitated by additional ion-dipole interactions involving the pyridinium units in the cyclophane and the carbonyl groups in cucurbit[8]uril. Because of the narrowing in the energy gaps of the cyclophane within the rigid hydrophobic cavities of cucurbit[8]urils, the binary and ternary ring-in-ring(s) complexes emit green and bright yellow fluorescence, respectively. A series of color-tunable emissions, such as sky blue, cyan, green, and yellow with increased fluorescence lifetimes, can be achieved by simply adding cucurbit[8]uril to an aqueous solution of the cyclophane. Notably, the smaller cyclobis(paraquat-p-phenylene), which contains the same p-xylylene linkers as the extended tetracationic cyclophane, does not form ring-in-ring(s) complexes with cucurbit[8]uril. The encapsulation of this extended tetracationic cyclophane by both one and two cucurbit[8]urils provides an incentive to design and synthesize more advanced supramolecular systems, as well as opening up a feasible approach toward achieving tunable multicolor photoluminescence with single chromophores.

The ability to control the relative motions of component parts in molecules is essential for the development of molecular nanotechnology. The advent of mechanically interlocked molecules (MIMs) has enhanced significantly the opportunities for chemists to harness such motions in artificial molecular machines (AMMs). Recently, we have developed artificial molecular pumps (AMPs) capable of producing highly energetic oligo- and polyrotaxanes with high precision. Here, we report the design, synthesis, and operation of an AMP incorporating a photocleavable stopper that allows for the use of orthogonal stimuli. Our approach employs a ratchet mechanism to pump a ring onto a collecting chain, forming an intermediate [2]rotaxane. At a subsequent time, application of light triggers the release of the ring back into the bulk solution with temporal control. This process is monitored by the quenching of the fluorescence of a naphthalene-based fluorophore. This design may find application in the fabrication of molecular transporting systems with on-demand functions.

Developing an extremely efficient and highly selective process for gold recovery is urgently desired for maintaining a sustainable ecological environment. Herein, we report a highly efficient gold-recovery protocol on the basis of the instantaneous assembly between cucurbit[6]uril (CB[6]) and [AuX

We report the encapsulation of free-base and zinc porphyrins by a tricyclic cyclophane receptor with subnanomolar binding affinities in water. The high affinities are sustained by the hydrophobic effect and multiple [CH···π] interactions covering large [π···π] stacking surfaces between the substrate porphyrins and the receptor. We discovered two co-conformational isomers of the 1:1 complex, where the porphyrin is orientated differently inside the binding cavity of the receptor on account of its tricyclic nature. The photophysical properties and chemical reactivities of the encapsulated porphyrins are modulated to a considerable extent by the receptor. Improved fluorescence quantum yields, red-shifted absorptions and emissions, and nearly quantitative energy transfer processes highlight the emergent photophysical enhancements. The encapsulated porphyrins enjoy unprecedented chemical stabilities, where their D/H exchange, protonation, and solvolysis under extremely acidic conditions are completely blocked. We anticipate that the ultrahigh stabilities and improved optical properties of these encapsulated porphyrins will find applications in single-molecule materials, artificial photodevices, and biomedical appliances.

Two new highly charged [2]catenanes—namely, mHe[2]C·6PF₆ and mHo[2]C·6PF₆—were synthesized by exploiting radical host–guest templation between derivatives containing BIPY•+ radical cations and the meta analogue of cyclobis(paraquat-p-phenylene). In contrast to related [2]catenanes that have been isolated as air-stable monoradicals, both mHe[2]C·6PF₆ and mHo[2]C·6PF₆ exist as air-stable singlet bisradicals, as evidenced by both X-ray crystallography in the solid state and EPR spectroscopy in solution. Electrochemical studies indicate that the first two reduction peaks of these two [2]catenanes are shifted significantly to more positive potentials, a feature which is responsible for their extraordinary stability in air. The mixed-valence nature of the mono- and bisradical states endows them with unique NIR absorption properties, e.g., NIR absorption bands for the mono- and bisradical states observed at ∼1800 and ∼1450 nm, respectively. These [2]catenanes are potentially useful in applications that include NIR photothermal conversion, UV–vis–NIR multiple-state electrochromic materials, and multiple-state memory devices. Our findings highlight the principle of “mechanical-bond-induced stabilization” as an efficient strategy for designing persistent organic radicals.

Aromatic hydrocarbon belts (AHCBs) have fascinated scientists for over half a century because of their aesthetically appealing structures and potential applications in the field of carbon nanotechnology. One of the enduring challenges in synthesizing AHCBs is how do we cope with the build-up of energy in the highly strained structures during their synthesis? Successful preparations of AHCBs offer the prospect of providing well-defined templates for the growth of uniform single-walled carbon nanotubes-a long-standing interest in nanocarbon science. In this Review, we revisit the protracted historical background involving the rational design and synthesis of AHCBs and highlight some of the more recent breakthroughs, with emphasis being placed on the different strategies that have been used for building up curved and fused benzenoid rings into molecular belts. We also discuss the scientific challenges in this fledgling field and provide some pointers as to what could transpire in years to come.

Efficient heterogeneous photosensitizing materials require both large accessible surface areas and excitons of suitable energies and with well-defined spin structures. Confinement of the tetracationic cyclophane (ExBox4+ ) within a nonporous anionic polystyrene sulfonate (PSS) matrix leads to a surface area increase of up to 225 m2 g-1 in ExBox•PSS. Efficient intersystem crossing is achieved by combining the spin-orbit coupling associated to Br heavy atoms in 1,3,5,8-tetrabromopyrene (TBP), and the photoinduced electron transfer in a TBP⊂ExBox4+ supramolecular dyad. The TBP⊂ExBox4+ complex displays a charge transfer band at 450 nm and an exciplex emission at 520 nm, indicating the formation of new mixed-electronic states. The lowest triplet state (T1 , 1.89 eV) is localized on the TBP and is close in energy with the charge separated state (CT, 2.14 eV). The homogeneous and heterogeneous photocatalytic activities of the TBP⊂ExBox4+ , for the elimination of a sulfur mustard simulant, has proved to be significantly more efficient than TBP and ExBox+4 , confirming the importance of the newly formed excited-state manifold in TBP⊂ExBox4+ for the population of the low-lying T1 state. The high stability, facile preparation, and high performance of the TBP⊂ExBox•PSS nanocomposites augur well for the future development of new supramolecular heterogeneous photosensitizers using host-guest chemistry.

Synthetic macrocycles capable of undergoing allosteric regulation by responding to versatile external stimuli are the subject of increasing attention in supramolecular science. Herein, we report a structurally transformative tetracationic cyclophane containing two 3,6-bis(4-pyridyl)-l,2,4,5-tetrazine (4-bptz) units, which are linked together by two p-xylylene bridges. The cyclophane, which possesses modular redox states and structural post-modifications, can undergo two reversibly consecutive two-electron reductions, affording first its bisradical dicationic counterpart, and then subsequently the fully reduced species. Furthermore, one single-parent cyclophane can afford effectively three other new analogs through box-to-box cascade transformations, taking advantage of either reductions or an inverse electron-demand Diels-Alder (IEDDA) reaction. While all four new tetracationic cyclophanes adopt rigid and symmetric box-like conformations, their geometries in relation to size, shape, electronic properties, and binding affinities toward polycyclic aromatic hydrocarbons can be readily regulated. This structurally transformative tetracationic cyclophane performs a variety of new tasks as a result of structural post-modifications, thus serving as a toolbox for probing the radical properties and generating rapidly a range of structurally diverse cyclophanes by efficient divergent syntheses. This research lays a solid foundation for the introduction of the structurally transformative tetracationic cyclophane into the realm of mechanically interlocked molecules and will provide a toolbox to construct and operate intelligent molecular machines.

The rational design of wholly synthetic receptors that bind active substrates with ultrahigh affinities is a challenging goal, especially in water. Here, we report the synthesis of a tricyclic octacationic cyclophane, which exhibits complementary stereoelectronic binding toward a widely used fluorescent dye, perylene diimide, with picomolar affinity in water. The ultrahigh binding affinity is sustained by a large and rigid hydrophobic binding surface, which provides a highly favorable enthalpy and a slightly positive entropy of complexation. The receptor–substrate complex shows significant improvement in optical properties, including red-shifted absorption and emission, turn-on fluorescence, and efficient energy transfer. An unusual single-excitation, dual-emission, imaging study of living cells was performed by taking advantage of a large pseudo-Stokes shift, produced by the efficient energy transfer.

Protection of enzymes with synthetic materials is a viable strategy to stabilize, and hence to retain, the reactivity of these highly active biomolecules in non-native environments. Active synthetic supports, coupled to encapsulated enzymes, can enable efficient cascade reactions which are necessary for processes like light-driven CO

Protection of enzymes with synthetic materials is a viable strategy to stabilize, and hence to retain, the reactivity of these highly active biomolecules in non-native environments. Active syntheti...

Melanin is a class of ubiquitous, heterogeneous, polymeric pigments. One of the most unusual features of melanin is the presence of stable persistent radicals, which has been reported to relate to ionizing radiation protection, including X-rays and gamma rays. In this work, we aimed to increase the radical content by introducing nitroxide radicals into synthetic melanin nanomaterials. Nanoparticles (NPs) were prepared by copolymerization of a stable radical modified monomer with the monomer dopamine. The radical content increased to 1 order of magnitude higher than that of the conventional melanin-like material, polydopamine. These radical NPs can enter human epidermal keratinocytes and form perinuclear caps, mimicking natural melanin synthesized by melanocytes. We demonstrated that these NPs display protective properties by scavenging reactive oxygen species, one of the most important biological effects of ionizing radiation exposure. This finding may have potential application for materials capable of mitigating side effects of clinical radiation therapy.

Valuing diversity leads to scientific excellence, the progress of science and most importantly, it is simply the right thing to do. We can value diversity not only in words, but also in actions. From the structure of DNA,1 to computer science,2 and space-station batteries,3 several key scientific discoveries that enhance our lives today, were made by marginalized scientists. These three scientists, Rosalind E. Franklin, Alan M. Turing and Olga D. González-Sanabria, did not conform to the cultural expectations of how scientists should look and behave. Unfortunately, marginalized scientists are often viewed as just a resource rather than the lifeblood that constitutes science itself. We need to embrace scientists from all walks of life and corners of the globe; this will also mean that nobody is excluded from tackling the life-threatening societal challenges that lie ahead. An awareness of science policy is essential to safeguarding our future. Science policy deals with creating the framework and codes of conduct that determine how science can best serve society.4-6 Discussions around science policy are often accompanied by anecdotes of “good” and “bad” practices regarding the merits of diversity and inclusion. Excellence and truth, which flow inexorably from diversity and inclusion, are the bedrocks upon which science should influence political and economic outcomes. A vital area of science policy is to support the professional development of marginalized scientists, an objective that must be acted upon by scientific leaders and communicators...