Search

The multifunctional enzyme, type-1 (MFE1) is involved in several lipid metabolizing pathways. It catalyses: (a) enoyl-CoA isomerase and (b) enoyl-CoA hydratase (EC 4.2.1.17) reactions in its N-terminal crotonase part, as well as (3) a 3S-hydroxy-acyl-CoA dehydrogenase (HAD; EC 1.1.1.35) reaction in its C-terminal 3S-hydroxy-acyl-CoA dehydrogenase part. Crystallographic binding studies with rat peroxisomal MFE1, using unbranched and branched 2E-enoyl-CoA substrate molecules, show that the substrate has been hydrated by the enzyme in the crystal and that the product, 3S-hydroxy-acyl-CoA, remains bound in the crotonase active site. The fatty acid tail points into an exit tunnel shaped by loop-2. The thioester oxygen is bound in the classical oxyanion hole of the crotonase fold, stabilizing the enolate reaction intermediate. The structural data of these enzyme product complexes suggest that the catalytic base, Glu123, initiates the isomerase reaction by abstracting the C2-proton from the substrate molecule. Subsequently, in the hydratase reaction, Glu123 completes the catalytic cycle by reprotonating the C2 atom. A catalytic water, bound between the OE1-atoms of the two catalytic glutamates, Glu103 and Glu123, plays an important role in the enoyl-CoA isomerase and the enoyl-CoA hydratase reaction mechanism of MFE1. The structural variability of loop-2 between MFE1 and its monofunctional homologues correlates with differences in the respective substrate preferences and catalytic rates., (© 2013 The Authors Journal compilation © 2013 FEBS.)

Most mutations at position 15 in the N-terminal arm of the regulatory protein AraC leave the protein incapable of responding to arabinose and inducing the proteins required for arabinose catabolism. Mutations at other positions of the arm do not have this behavior. Simple energetic analysis of the interactions between the arm and bound arabinose do not explain the uninducibility of AraC with mutations at position 15. Extensive molecular dynamics (MD) simulations, carried out largely on the Open Science Grid, were done of the wild-type protein with and without bound arabinose and of all possible mutations at position 15, many of which were constructed and measured for this work. Good correlation was found for deviation of arm position during the simulations and inducibility as measured in vivo of the same mutant proteins. Analysis of the MD trajectories revealed that preservation of the shape of the arm is critical to inducibility. To maintain the correct shape of the arm, the strengths of three interactions observed to be strong in simulations of the wild-type AraC protein need to be preserved. These interactions are between arabinose and residue 15, arabinose and residues 8-9, and residue 13 and residue 15. The latter interaction is notable because residues L9, Y13, F15, W95, and Y97 form a hydrophobic cluster which needs to be preserved for retention of the correct shape., (Copyright © 2012 Wiley Periodicals, Inc.)

Phosphosugar isomerases can catalyze the isomerization of not only phosphosugar but also of monosaccharides, suggesting that the phosphosugar isomerases can be used as sugar isomerases that do not exist in nature. Determination of active-site residues of phosphosugar isomerases, including ribose-5-phosphate isomerase from Clostridium difficile (CDRPI), mannose-6-phosphate isomerase from Bacillus subtilis (BSMPI), and glucose-6-phosphate isomerase from Pyrococcus furiosus (PFGPI), was accomplished by docking of monosaccharides onto the structure models of the isomerases. The determinant residues, including Arg133 of CDRPI, Arg192 of BSMPI, and Thr85 of PFGPI, were subjected to alanine substitutions and found to act as phosphate-binding sites. R133D of CDRPI, R192 of BSMPI, and T85Q of PFGPI displayed the highest catalytic efficiencies for monosaccharides at each position. These residues exhibited 1.8-, 3.5-, and 4.9-fold higher catalytic efficiencies, respectively, for the monosaccharides than the wild-type enzyme. However, the activities of these 3 variant enzymes for phosphosugars as the original substrates disappeared. Thus, R133D of CDRPI, R192 of BSMPI, and T85Q of PFGPI are no longer phosphosugar isomerases; instead, they are changed to a d-ribose isomerase, an l-ribose isomerase, and an l-talose isomerase, respectively. In this study, we used substrate-tailored optimization to develop novel sugar isomerases which are not found in nature based on phosphosugar isomerases.

Exploiting catalytic promiscuity: The proline-based enzyme 4-oxalocrotonate tautomerase (4-OT) promiscuously catalyzes asymmetric Michael-type additions of linear aldehydes--ranging from acetaldehyde to octanal--to trans-β-nitrostyrene in aqueous solvent. The presence of 1.4 mol% of 4-OT effected formation of the anticipated γ-nitroaldehydes in fair to good yields with dr values of up to 93:7 and ee values of up to 81 %., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Absorption of a light particle by an opsin-pigment causes photoisomerization of its retinaldehyde chromophore. Restoration of light sensitivity to the resulting apo-opsin requires chemical re-isomerization of the photobleached chromophore. This is carried out by a multistep enzyme pathway called the visual cycle. Accumulating evidence suggests the existence of an alternative visual cycle for regenerating opsins in daylight. Here we identified dihydroceramide desaturase-1 (DES1) as a retinol isomerase and an excellent candidate for isomerase-2 in this alternative pathway. DES1 is expressed in retinal Müller cells, where it coimmunoprecipitates with cellular retinaldehyde binding protein (CRALBP). Adenoviral gene therapy with DES1 partially rescued the biochemical and physiological phenotypes in Rpe65(-/-) mice lacking isomerohydrolase (isomerase-1). Knockdown of DES1 expression by RNA interference concordantly reduced isomerase-2 activity in cultured Müller cells. Purified DES1 had very high isomerase-2 activity in the presence of appropriate cofactors, suggesting that DES1 by itself is sufficient for isomerase activity.

The recent spate of discoveries of novel acyl-CoA mutases has engendered a growing appreciation for the diversity of 5'-deoxyadenosylcobalamin-dependent rearrangement reactions. The prototype of the reaction catalyzed by these enzymes is the 1,2 interchange of a hydrogen atom with a thioester group leading to a change in the degree of carbon skeleton branching. These enzymes are predicted to share common architectural elements: a Rossman fold and a triose phosphate isomerase (TIM)-barrel domain for binding cofactor and substrate, respectively. Within this family, methylmalonyl-CoA mutase (MCM) is the best studied and is the only member found in organisms ranging from bacteria to man. MCM interconverts (2R)-methylmalonyl-CoA and succinyl-CoA. The more recently discovered family members include isobutyryl-CoA mutase (ICM), which interconverts isobutyryl-CoA and n-butyryl-CoA; ethylmalonyl-CoA mutase, which interconverts (2R)-ethylmalonyl-CoA and (2S)-methylsuccinyl-CoA; and 2-hydroxyisobutyryl-CoA mutase, which interconverts 2-hydroxyisobutyryl-CoA and (3S)-hydroxybutyryl-CoA. A variant in which the two subunits of ICM are fused to a G-protein chaperone, IcmF, has been described recently. In addition to its ICM activity, IcmF also catalyzes the interconversion of isovaleryl-CoA and pivalyl-CoA. This review focuses on the involvement of acyl-CoA mutases in central carbon and secondary bacterial metabolism and on their biotechnological potential for applications ranging from bioremediation to stereospecific synthesis of C2-C5 carboxylic acids and alcohols, and for production of potential commodity and specialty chemicals.

4-Oxalocrotonate tautomerase (4-OT), a member of tautomerase superfamily, is an essential enzyme in the degradative metabolism pathway occurring in the Krebs cycle. The proton transfer process catalyzed by 4-OT has been explored previously using both experimental and theoretical methods; however, the elaborate catalytic mechanism of 4-OT still remains unsettled. By combining classical molecular mechanics with quantum mechanics, our results demonstrate that the native hexametric 4-OT enzyme, including six protein monomers, must be employed to simulate the proton transfer process in 4-OT due to protein-protein steric and electrostatic interactions. As a consequence, only three out of the six active sites in the 4-OT hexamer are observed to be occupied by three 2-oxo-4-hexenedioates (2o4hex), i.e., half-of-the-sites occupation. This agrees with experimental observations on negative cooperative effect between two adjacent substrates. Two sequential proton transfers occur: one proton from the C3 position of 2o4hex is initially transferred to the nitrogen atom of the general base, Pro1. Subsequently, the same proton is shuttled back to the position C5 of 2o4hex to complete the proton transfer process in 4-OT. During the catalytic reaction, conformational changes (i.e., 1-carboxyl group rotation) of 2o4hex may occur in the 4-OT dimer model but cannot proceed in the hexametric structure. We further explained that the docking process of 2o4hex can influence the specific reactant conformations and an alternative substrate (2-hydroxymuconate) may serve as reactant under a different reaction mechanism than 2o4hex.

Styrene oxide isomerase (SOI) is involved in peripheral styrene catabolism of bacteria and converts styrene oxide to phenylacetaldehyde. Here, we report on the identification, enrichment, and biochemical characterization of a novel representative from the actinobacterium Rhodococcus opacus 1CP. The enzyme, which is strongly induced during growth on styrene, was shown to be membrane integrated, and a convenient procedure was developed to highly enrich the protein in active form from the wild-type host. A specific activity of about 370 U mg(-1) represents the highest activity reported for this enzyme class so far. This, in combination with a wide pH and temperature tolerance, the independence from cofactors, and the ability to convert a spectrum of substituted styrene oxides, makes a biocatalytic application imaginable. First, semipreparative conversions were performed from which up to 760 μmol of the pure phenylacetaldehyde could be obtained from 130 U of enriched SOI. Product concentrations of up to 76 mM were achieved. However, due to the high chemical reactivity of the aldehyde function, SOI was shown to be the subject of an irreversible product inhibition. A half-life of 15 min was determined at a phenylacetaldehyde concentration of about 55 mM, indicating substantial limitations of applicability and the need to modify the process.

Background: Receptors with a single transmembrane (TM) domain are essential for the signal transduction across the cell membrane. NMR spectroscopy is a powerful tool to study structure of the single TM domain. The expression and purification of a TM domain in Escherichia coli (E.coli) is challenging due to its small molecular weight. Although ketosteroid isomerase (KSI) is a commonly used affinity tag for expression and purification of short peptides, KSI tag needs to be removed with the toxic reagent cyanogen bromide (CNBr)., Result: The purification of the TM domain of p75 neurotrophin receptor using a KSI tag with the introduction of a thrombin cleavage site is described herein. The recombinant fusion protein was refolded into micelles and was cleaved with thrombin. Studies showed that purified protein could be used for structural study using NMR spectroscopy., Conclusions: These results provide another strategy for obtaining a single TM domain for structural studies without using toxic chemical digestion or acid to remove the fusion tag. The purified TM domain of p75 neurotrophin receptor will be useful for structural studies.

Recombinant (+)-δ-cadinene synthase (DCS) from Gossypium arboreum catalyzes the metal-dependent cyclization of (E,E)-farnesyl diphosphate (FDP) to the cadinane sesquiterpene δ-cadinene, the parent hydrocarbon of cotton phytoalexins such as gossypol. In contrast to some other sesquiterpene cyclases, DCS carries out this transformation with >98% fidelity but, as a consequence, leaves no mechanistic traces of its mode of action. The formation of (+)-δ-cadinene has been shown to occur via the enzyme-bound intermediate (3R)-nerolidyl diphosphate (NDP), which in turn has been postulated to be converted to cis-germacradienyl cation after a 1,10-cyclization. A subsequent 1,3-hydride shift would then relocate the carbocation within the transient macrocycle to expedite a second cyclization that yields the cadinenyl cation with the correct cis stereochemistry found in (+)-δ-cadinene. An elegant 1,10-mechanistic pathway that avoids the formation of (3R)-NDP has also been suggested. In this alternative scenario, the final cadinenyl cation is proposed to be formed through the intermediacy of trans, trans-germacradienyl cation and germacrene D. In addition, an alternative 1,6-ring closure mechanism via the bisabolyl cation has previously been envisioned. We report here a detailed investigation of the catalytic mechanism of DCS using a variety of mechanistic probes including, among others, deuterated and fluorinated FDPs. Farnesyl diphosphate analogues with fluorine at C2 and C10 acted as inhibitors of DCS, but intriguingly, after prolonged overnight incubations, they yielded 2F-germacrene(s) and a 10F-humulene, respectively. The observed 1,10-, and to a lesser extent, 1,11-cyclization activity of DCS with these fluorinated substrates is consistent with the postulated macrocyclization mechanism(s) en route to (+)-δ-cadinene. On the other hand, mechanistic results from incubations of DCS with 6F-FPP, (2Z,6E)-FDP, neryl diphosphate, 6,7-dihydro-FDP, and NDP seem to be in better agreement with the potential involvement of the alternative biosynthetic 1,6-ring closure pathway. In particular, the strong inhibition of DCS by 6F-FDP, coupled to the exclusive bisabolyl- and terpinyl-derived product profiles observed for the DCS-catalyzed turnover of (2Z,6E)-farnesyl and neryl diphosphates, suggested the intermediacy of α-bisabolyl cation. DCS incubations with enantiomerically pure [1-(2)H(1)](1R)-FDP revealed that the putative bisabolyl-derived 1,6-pathway proceeds through (3R)-nerolidyl diphosphate (NDP), is consistent with previous deuterium-labeling studies, and accounts for the cis stereochemistry characteristic of cadinenyl-derived sesquiterpenes. While the results reported here do not unambiguously rule in favor of 1,6- or 1,10-cyclization, they demonstrate the mechanistic versatility inherent to DCS and highlight the possible existence of multiple mechanistic pathways.

Abietadiene synthase from Abies grandis (AgAS) is a model system for diterpene synthase activity, catalyzing class I (ionization-initiated) and class II (protonation-initiated) cyclization reactions. Reported here is the crystal structure of AgAS at 2.3 Å resolution and molecular dynamics simulations of that structure with and without active site ligands. AgAS has three domains (α, β, and γ). The class I active site is within the C-terminal α domain, and the class II active site is between the N-terminal γ and β domains. The domain organization resembles that of monofunctional diterpene synthases and is consistent with proposed evolutionary origins of terpene synthases. Molecular dynamics simulations were carried out to determine the effect of substrate binding on enzymatic structure. Although such studies of the class I active site do lead to an enclosed substrate-Mg(2+) complex similar to that observed in crystal structures of related plant enzymes, it does not enforce a single substrate conformation consistent with the known product stereochemistry. Simulations of the class II active site were more informative, with observation of a well ordered external loop migration. This "loop-in" conformation not only limits solvent access but also greatly increases the number of conformational states accessible to the substrate while destabilizing the nonproductive substrate conformation present in the "loop-out" conformation. Moreover, these conformational changes at the class II active site drive the substrate toward the proposed transition state. Docked substrate complexes were further assessed with regard to the effects of site-directed mutations on class I and II activities.

5'-Deoxyadenosylcobalamin (AdoCbl)-dependent isomerases catalyze carbon skeleton rearrangements using radical chemistry. We have recently characterized a fusion protein that comprises the two subunits of the AdoCbl-dependent isobutyryl-CoA mutase flanking a G-protein chaperone and named it isobutyryl-CoA mutase fused (IcmF). IcmF catalyzes the interconversion of isobutyryl-CoA and n-butyryl-CoA, whereas GTPase activity is associated with its G-protein domain. In this study, we report a novel activity associated with IcmF, i.e. the interconversion of isovaleryl-CoA and pivalyl-CoA. Kinetic characterization of IcmF yielded the following values: a K(m) for isovaleryl-CoA of 62 ± 8 μM and V(max) of 0.021 ± 0.004 μmol min(-1) mg(-1) at 37 °C. Biochemical experiments show that an IcmF in which the base specificity loop motif NKXD is modified to NKXE catalyzes the hydrolysis of both GTP and ATP. IcmF is susceptible to rapid inactivation during turnover, and GTP conferred modest protection during utilization of isovaleryl-CoA as substrate. Interestingly, there was no protection from inactivation when either isobutyryl-CoA or n-butyryl-CoA was used as substrate. Detailed kinetic analysis indicated that inactivation is associated with loss of the 5'-deoxyadenosine moiety from the active site, precluding reformation of AdoCbl at the end of the turnover cycle. Under aerobic conditions, oxidation of the cob(II)alamin radical in the inactive enzyme results in accumulation of aquacobalamin. Because pivalic acid found in sludge can be used as a carbon source by some bacteria and isovaleryl-CoA is an intermediate in leucine catabolism, our discovery of a new isomerase activity associated with IcmF expands its metabolic potential.

Nature has hardly evolved a biochemistry of fluorine although there is a low-level occurrence of fluoroacetate found in selected tropical and subtropical plants. This compound, which is generally produced in low concentrations, has been identified in the plants due to its high toxicity, although to date the biosynthesis of fluoroacetate in plants remains unknown. After that, fluorinated entities in nature are extremely rare, and despite increasingly sophisticated screening and analytical methods applied to natural product extraction, it has been 25 years since the last bona fide fluorinated natural product was identified from an organism. This was the reported isolation of the antibiotic 4-fluorothreonine and the toxin fluoroacetate in 1986 from Streptomyces cattleya. This bacterium has proven amenable to biochemical investigation, the fluorination enzyme (fluorinase) has been isolated and characterized, and the biosynthetic pathway to these bacterial metabolites has been elucidated. Also the fluorinase gene has been cloned into a host bacterium (Salinispora tropica), and this has enabled the de novo production of a bioactive fluorinated metabolite from fluoride ion, by genetic engineering. Biotechnological manipulation of the fluorinase offers the prospects for the assembly of novel fluorinated metabolites by fermentation technology. This is particularly attractive, given the backdrop that about 15-20% of pharmaceuticals licensed each year (new chemical entities) contain a fluorine atom., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Glucosamine-6-phosphate (GlcN-6-P) synthase catalyses the first and practically irreversible step in hexosamine metabolism. The final product of this pathway, uridine 5' diphospho N-acetyl-D-glucosamine (UDP-GlcNAc), is an essential substrate for assembly of bacterial and fungal cell walls. Moreover, the enzyme is involved in phenomenon of hexosamine induced insulin resistance in type II diabetes, which makes it a potential target for antifungal, antibacterial and antidiabetic therapy. The crystal structure of the isomerase domain of GlcN-6-P synthase from human pathogenic fungus Candida albicans, in complex with UDP-GlcNAc has been solved recently but it has not revealed the molecular mechanism of inhibition taking place under UDP-GlcNAc influence, the unique feature of the eukaryotic enzyme. UDP-GlcNAc is a physiological inhibitor of GlcN-6-P synthase, binding about 1 nm away from the active site of the enzyme. In the present work, comparative molecular dynamics simulations of the free and UDP-GlcNAc-bounded structures of GlcN-6-P synthase have been performed. The aim was to complete static X-ray structural data and detect possible changes in the dynamics of the two structures. Results of the simulation studies demonstrated higher mobility of the free structure when compared to the liganded one. Several amino acid residues were identified, flexibility of which is strongly affected upon UDP-GlcNAc binding. Importantly, the most fixed residues are those related to the inhibitor binding process and to the catalytic reaction. The obtained results constitute an important step toward understanding of mechanism of GlcN-6-P synthase inhibition by UDP-GlcNAc molecule.

A complete pathway (structures and energies of intermediates and transition state structures connecting them) from geranylgeranyl diphosphate to taxadiene, obtained using quantum chemical calculations, is described. This pathway is fully consistent with previous labeling experiments, despite differing in several subtle ways (in terms of conformations of certain carbocation intermediates and in the concertedness and synchronicity of certain bond-forming events) from previous mechanistic proposals. Also, on the basis of the theoretical results, it is proposed that the 2-fluoro-geranylgeranyl diphosphate substrate analogue in the recently reported X-ray crystal structure of taxadiene synthase is bound in a nonproductive orientation.

Analysis of the products generated by mutants of aristolochene synthase from P. roqueforti (PR-AS) revealed the prominent structural role played by the aliphatic residue Leu 108 in maintaining the productive conformation of farnesyl diphosphate to ensure C1-C10 (σ-bond) ring-closure and hence (+)-aristolochene production.

L-Heptoses (L-glycero-D-manno-heptopyranoses) are constituents of the inner core of lipolysaccharide (LPS), a molecule playing key roles in the mortality of many infectious diseases as well as in the virulence of many human pathogens. The inhibition of the first enzymes of the bacterial heptose biosynthetic pathway is an almost unexplored field to date although it appears to be a very novel way for the development of antivirulence drugs. We report the synthesis of a series of D-glycero-D-manno-heptopyranose 7-phosphate (H7P) analogues and their inhibition properties against the isomerase GmhA and the the kinase HldE, the two first enzymes of the bacterial heptose biosynthetic pathway. The heptose structures have been modified at the 1-, 2-, 6- and 7-positions to probe the importance of the key structural features of H7P that allow a tight binding to the target enzymes; H7P being the product of GmhA and the substrate of HldE, the second objective was to find structures that could simultaneously inhibit both enzymes. We found that GmhA and HldE were extremely sensitive to structural modifications at the 6- and 7- positions of the heptose scaffold. To our surprise, the epimeric analogue of H7P displaying a D-glucopyranose configuration was found to be the best inhibitor of both enzymes but also the only molecule of this series that could inhibit GmhA (IC(50)=34 μM) and HldE (IC(50)=9.4 μM) in the low micromolar range. Noteworthy, this study describes the first inhibitors of GmhA ever reported, and paves the way to the design of a second generation of molecules targeting the bacterial virulence., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The biosynthesis of the C ring of the antitumor antibiotic agent, tomaymycin, is proposed to proceed through five enzyme-catalyzed steps from l-tyrosine. The genes encoding these enzymes have recently been cloned and their functions tentatively assigned, but there is limited biochemical evidence supporting the assignments of the last three steps. One enzyme, TomN, shows 58% pairwise sequence similarity with 4-oxalocrotonate tautomerase (4-OT), an enzyme found in a catabolic pathway for aromatic hydrocarbons. The TomN sequence includes three amino acids (Pro-1, Arg-11, and Arg-39) that have been identified as critical catalytic residues in 4-OT. However, the proposed substrate for TomN is very different from that processed by 4-OT. To establish the function and mechanism of TomN and its relationship with 4-OT, we conducted kinetic, mutagenic, and structural studies. The kinetic parameters for TomN, and four alanine mutants, P1A, R11A, R39A, and R61A, were determined using 2-hydroxymuconate, the substrate for 4-OT. The TomN-catalyzed reaction using this substrate compares favorably to that of 4-OT. In addition, the kinetic parameters for the P1A, R11A, and R39A mutants of TomN parallel the trends observed for the corresponding 4-OT mutants, implicating an analogous mechanism. A high-resolution crystal structure (1.4 Å) of TomN shows that the overall structure and the active site region are highly similar to those of 4-OT with a root-mean-square deviation of 0.81 Å. Moreover, key active site residues are positionally conserved. The combined results suggest that the tentative assignment for TomN and the proposed sequence of events in the biosynthetic pathway leading to the formation of the C ring of tomaymycin might not be correct. An alternative pathway that awaits biochemical confirmation is proposed.

In many bacteria tenI is found clustered with genes involved in thiamin thiazole biosynthesis. However, while TenI shows high sequence similarity with thiamin phosphate synthase, the purified protein has no thiamin phosphate synthase activity, and the role of this enzyme in thiamin biosynthesis remains unknown. In this contribution, we identify the function of TenI as a thiazole tautomerase, describe the structure of the enzyme complexed with its reaction product, identify the substrates phosphate and histidine 122 as the acid/base residues involved in catalysis, and propose a mechanism for the reaction. The identification of the function of TenI completes the identification of all of the enzymes needed for thiamin biosynthesis by the major bacterial pathway.

The structure of ent-copalyl diphosphate synthase reveals three α-helical domains (α, β and γ), as also observed in the related diterpene cyclase taxadiene synthase. However, active sites are located at the interface of the βγ domains in ent-copalyl diphosphate synthase but exclusively in the α domain of taxadiene synthase. Modular domain architecture in plant diterpene cyclases enables the evolution of alternative active sites and chemical strategies for catalyzing isoprenoid cyclization reactions.

Enzymatic processes are useful for industrially important sugar production, and in vitro two-step isomerization has proven to be an efficient process in utilizing readily available sugar sources. A hypothetical uncharacterized protein encoded by ydaE of Bacillus licheniformis was found to have broad substrate specificities and has shown high catalytic efficiency on D-lyxose, suggesting that the enzyme is D-lyxose isomerase. Escherichia coli BL21 expressing the recombinant protein, of 19.5 kDa, showed higher activity at 40 to 45°C and pH 7.5 to 8.0 in the presence of 1.0 mM Mn²+. The apparent K(m) values for D-lyxose and D-mannose were 30.4 ± 0.7 mM and 26 ± 0.8 mM, respectively. The catalytic efficiency (k(cat)/K(m)) for lyxose (3.2 ± 0.1 mM⁻¹ s⁻¹) was higher than that for D-mannose (1.6 mM⁻¹ s⁻¹). The purified protein was applied to the bioproduction of D-lyxose and D-glucose from d-xylose and D-mannose, respectively, along with the thermostable xylose isomerase of Thermus thermophilus HB08. From an initial concentration of 10 mM D-lyxose and D-mannose, 3.7 mM and 3.8 mM D-lyxose and D-glucose, respectively, were produced by two-step isomerization. This two-step isomerization is an easy method for in vitro catalysis and can be applied to industrial production.

The enzyme 4-oxalocrotonate tautomerase (4-OT) is part of a catabolic pathway for aromatic hydrocarbons in Pseudomonas putida mt-2, where it catalyzes the conversion of 2-hydroxy-2,4-hexadienedioate(1) to 2-oxo-3-hexenedioate(2). 4-OT is a member of the tautomerase superfamily, a group of homologous proteins that are characterized by a β-α-β structural fold and a catalytic amino-terminal proline. In the mechanism of 4-OT, Pro1 is a general base that abstracts the 2-hydroxyl proton of 1 for delivery to the C-5 position to yield 2. Here, 4-OT was explored for nucleophilic catalysis based on the mechanistic reasoning that its Pro1 residue has the correct protonation state (pK(a) ∼6.4) to be able to act as a nucleophile at pH 7.3. By using inhibition studies and mass spectrometry experiments it was first demonstrated that 4-OT can use Pro1 as a nucleophile to form an imine/enamine with various aldehyde and ketone compounds. The chemical potential of the smallest enamine (generated from acetaldehyde) was then explored for further reactions by using a small set of selected electrophiles. This systematic screening approach led to the discovery of a new promiscuous activity in wild-type 4-OT: the enzyme catalyzes the aldol condensation of acetaldehyde with benzaldehyde to form cinnamaldehyde. This low-level aldolase activity can be improved 16-fold with a single point mutation (L8R) in 4-OT's active site. The proposed mechanism of the reaction mimicks that used by natural class-I aldolases and designed catalytic aldolase antibodies. An important difference, however, is that these natural and designed aldolases use the primary amine of a lysine residue to form enamines with carbonyl substrates, whereas 4-OT uses the secondary amine of an active-site proline as the nucleophile catalyst. Further systematic screening of 4-OT and related proline-based biocatalysts might prove to be a useful approach to discover new promiscuous carbonyl transformation activities that could be exploited to develop new biocatalysts for carbon-carbon bond formation., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In histidine and tryptophan biosynthesis, two related isomerization reactions are generally catalyzed by two specific single-substrate enzymes (HisA and TrpF), sharing a similar (β/α)(8)-barrel scaffold. However, in some actinobacteria, one of the two encoding genes (trpF) is missing and the two reactions are instead catalyzed by one bisubstrate enzyme (PriA). To unravel the unknown mechanism of bisubstrate specificity, we used the Mycobacterium tuberculosis PriA enzyme as a model. Comparative structural analysis of the active site of the enzyme showed that PriA undergoes a reaction-specific and substrate-induced metamorphosis of the active site architecture, demonstrating its unique ability to essentially form two different substrate-specific actives sites. Furthermore, we found that one of the two catalytic residues in PriA, which are identical in both isomerization reactions, is recruited by a substrate-dependent mechanism into the active site to allow its involvement in catalysis. Comparison of the structural data from PriA with one of the two single-substrate enzymes (TrpF) revealed substantial differences in the active site architecture, suggesting independent evolution. To support these observations, we identified six small molecule compounds that inhibited both PriA-catalyzed isomerization reactions but had no effect on TrpF activity. Our data demonstrate an opportunity for organism-specific inhibition of enzymatic catalysis by taking advantage of the distinct ability for bisubstrate catalysis in the M. tuberculosis enzyme.

The human type 1 isoform of 3β-hydroxysteroid dehydrogenase is a member of short-chain oxidoreductase family that catalyzes the conversion of dehydroepiandrosterone to androstenedione. To compare the molecular events underlying cofactor specificity in the wild-type and D35A/K36R mutant enzymes, molecular dynamics (MD) simulations of fully solvated cofactor-3β-HSD1 (wild-type and mutant) complex are performed. Molecular modeling methods are applied to construct three-dimensional models of cofactor-3β-HSD1 complexes based on Uridine diphosphate (UDP)-galactose 4-epimerase crystal structure from Escherichia coli. The binding mode and binding energy analysis between four different complexes indicate that Asp35 and Lys36 are key residues for the cofactor specificity of 3β-HSD1, which is in agreement with mutagenesis studies results obtained by Thomas et al.8 The MD results also display that the residue Glu41 may be another important residue except Asp35 and Lys36 for the cofactor specificity and that this result needs further mutational experiment for validation.

With more than 55,000 members identified so far in all forms of life, the family of terpene or terpenoid natural products represents the epitome of molecular biodiversity. A well-known and important member of this family is the polycyclic diterpenoid Taxol (paclitaxel), which promotes tubulin polymerization and shows remarkable efficacy in cancer chemotherapy. The first committed step of Taxol biosynthesis in the Pacific yew (Taxus brevifolia) is the cyclization of the linear isoprenoid substrate geranylgeranyl diphosphate (GGPP) to form taxa-4(5),11(12)diene, which is catalysed by taxadiene synthase. The full-length form of this diterpene cyclase contains 862 residues, but a roughly 80-residue amino-terminal transit sequence is cleaved on maturation in plastids. We now report the X-ray crystal structure of a truncation variant lacking the transit sequence and an additional 27 residues at the N terminus, hereafter designated TXS. Specifically, we have determined structures of TXS complexed with 13-aza-13,14-dihydrocopalyl diphosphate (1.82 Å resolution) and 2-fluorogeranylgeranyl diphosphate (2.25 Å resolution). The TXS structure reveals a modular assembly of three α-helical domains. The carboxy-terminal catalytic domain is a class I terpenoid cyclase, which binds and activates substrate GGPP with a three-metal ion cluster. The N-terminal domain and a third 'insertion' domain together adopt the fold of a vestigial class II terpenoid cyclase. A class II cyclase activates the isoprenoid substrate by protonation instead of ionization, and the TXS structure reveals a definitive connection between the two distinct cyclase classes in the evolution of terpenoid biosynthesis.

The absence of the leucine biosynthesis pathway in humans makes the enzymes of this pathway in pathogenic bacteria such as Mycobacterium tuberculosis potential candidates for developing novel antibacterial drugs. One of these enzymes is isopropylmalate isomerase (IPMI). IPMI exists as a complex of two subunits: the large (LeuC) and the small (LeuD) subunit. The functional LeuCD complex catalyzes the stereospecific conversion reaction of α-isopropylmalate to β-isopropylmalate. Three C-terminally truncated variants of LeuD have been analyzed by X-ray crystallography to resolutions of 2.0 Å (LeuD_1-156), 1.2 Å (LeuD_1-168), and 2.5 Å (LeuD_1-186), respectively. The two most flexible parts of the structure are the regions of residues 30-37, the substrate discriminating loop, and of residues 70-74, the substrate binding loop. The three determined structures were also compared with the structures of other bacterial LeuDs. This comparison suggests the presence of two LeuD subfamilies. A model for the structure of the inactive enzyme complex has been obtained from solution X-ray scattering experiments. The crystal structure of LeuD was shown to be compatible with the solution X-ray scattering data from the small subunit. In contrast, the solution scattering results suggest that the large subunit LeuC and the LeuCD complex have overall shapes, which are radically different from the ones observed in the crystals of the functional homolog mitochondrial aconitase., (Copyright © 2010 Wiley-Liss, Inc.)

Linoleic acid isomerase in Lactobacillus plantarum was found to be a novel multi-component enzyme system widespread in membrane and soluble fractions. The isomerization reaction involved a hydration step, 10-hydroxy-12-octadecenoic acid production from linoleic acid, as part of the reaction, and the hydration reaction was catalyzed by the membrane fraction. Both membrane and soluble fractions were required for the whole isomerization reaction, i.e., conjugated linoleic acid (CLA) production from linoleic acid, and for CLA production from 10-hydroxy-12-octadecenoic acid, a reaction intermediate. The multi-component enzyme system was inhibited by o-phenanthroline, and divalent metal ions such as Ni(2+) and Co(2+) restored activity. Metal oxides such as VO(4)(3+), MoO(4)(2+), and MnO(4)(2+) enhanced activity. The multi-component enzyme systems required oxidoreduction cofactors such as NADH together with FAD or NADPH for total activity.

The tautomerase superfamily consists of structurally homologous proteins that are characterized by a β-α-β fold and a catalytic amino-terminal proline. 4-Oxalocrotonate tautomerase (4-OT) family members have been identified and categorized into five subfamilies on the basis of multiple sequence alignments and the conservation of key catalytic and structural residues. Representative members from two subfamilies have been cloned, expressed, purified, and subjected to kinetic and structural characterization. The crystal structure of DmpI from Helicobacter pylori (HpDmpI), a 4-OT homolog in subfamily 3, has been determined to high resolution (1.8Å and 2.1Å) in two different space groups. HpDmpI is a homohexamer with an active site cavity that includes Pro-1, but lacks the equivalent of Arg-11 and Arg-39 found in 4-OT. Instead, the side chain of Lys-36 replaces that of Arg-11 in a manner similar to that observed in the trimeric macrophage migration inhibitory factor (MIF), which is the title protein of another family in the superfamily. The electrostatic surface of the active site is also quite different and suggests that HpDmpI might prefer small, monoacid substrates. A kinetic analysis of the enzyme is consistent with the structural analysis, but a biological role for the enzyme remains elusive. The crystal structure of DmpI from Archaeoglobus fulgidus (AfDmpI), a 4-OT homolog in subfamily-4, has been determined to 2.4Å resolution. AfDmpI is also a homohexamer, with a proposed active site cavity that includes Pro-1, but lacks any other residues that are readily identified as catalytic ones related to 4-OT activity. Indeed, the electrostatic potential of the active site differs significantly in that it is mostly neutral, in contrast to the usual electropositive features found in other 4-OT family members, suggesting that AfDmpI might accommodate hydrophobic substrates. A kinetic analysis has been carried out, but does not provide any clues about the type of reaction the enzyme might catalyze., (Copyright © 2010 Elsevier Inc. All rights reserved.)

Prokaryotes can use a variety of sugars as carbon sources in order to provide a selective survival advantage. The gene z5688 found in the pathogenic Escherichia coli O157:H7 encodes a "hypothetical" protein of unknown function. Sequence analysis identified the gene product as a putative member of the cupin superfamily of proteins, but no other functional information was known. We have determined the crystal structure of the Z5688 protein at 1.6 A resolution and identified the protein as a novel E. coli sugar isomerase (EcSI) through overall fold analysis and secondary-structure matching. Extensive substrate screening revealed that EcSI is capable of acting on d-lyxose and d-mannose. The complex structure of EcSI with fructose allowed the identification of key active-site residues, and mutagenesis confirmed their importance. The structure of EcSI also suggested a novel mechanism for substrate binding and product release in a cupin sugar isomerase. Supplementation of a nonpathogenic E. coli strain with EcSI enabled cell growth on the rare pentose d-lyxose., (Copyright (c) 2010 Elsevier Ltd. All rights reserved.)

The structures and mechanism of action of many terpene cyclases are known, but no structures of diterpene cyclases have yet been reported. Here, we propose structural models based on bioinformatics, site-directed mutagenesis, domain swapping, enzyme inhibition, and spectroscopy that help explain the nature of diterpene cyclase structure, function, and evolution. Bacterial diterpene cyclases contain approximately 20 alpha-helices and the same conserved "QW" and DxDD motifs as in triterpene cyclases, indicating the presence of a betagamma barrel structure. Plant diterpene cyclases have a similar catalytic motif and betagamma-domain structure together with a third, alpha-domain, forming an alphabetagamma structure, and in H(+)-initiated cyclases, there is an EDxxD-like Mg(2+)/diphosphate binding motif located in the gamma-domain. The results support a new view of terpene cyclase structure and function and suggest evolution from ancient (betagamma) bacterial triterpene cyclases to (betagamma) bacterial and thence to (alphabetagamma) plant diterpene cyclases., (2010 Wiley-Liss, Inc.)

4-Oxalocrotonate tautomerase (4-OT) isozymes play prominent roles in the bacterial utilization of aromatic hydrocarbons as sole carbon sources. These enzymes catalyze the conversion of 2-hydroxy-2,4-hexadienedioate (or 2-hydroxymuconate) to 2-oxo-3-hexenedioate, where Pro-1 functions as a general base and shuttles a proton from the 2-hydroxyl group of the substrate to the C-5 position of the product. 4-OT, a homohexamer from Pseudomonas putida mt-2, is the most extensively studied 4-OT isozyme and the founding member of the tautomerase superfamily. A search of five thermophilic bacterial genomes identified a coded amino acid sequence in each that had been annotated as a tautomerase-like protein but lacked Pro-1. However, a nearby sequence has Pro-1, but the sequence is not annotated as a tautomerase-like protein. To characterize this group of proteins, two genes from Chloroflexus aurantiacus J-10-fl were cloned, and the corresponding proteins were expressed. Kinetic, biochemical, and X-ray structural analyses show that the two expressed proteins form a functional heterohexamer 4-OT (hh4-OT), composed of three alphabeta dimers. Like the P. putida enzyme, hh4-OT requires the amino-terminal proline and two arginines for the conversion of 2-hydroxymuconate to the product, implicating an analogous mechanism. In contrast to 4-OT, hh4-OT does not exhibit the low-level activity of another tautomerase superfamily member, the heterohexamer trans-3-chloroacrylic acid dehalogenase (CaaD). Characterization of hh4-OT enables functional assignment of the related enzymes, highlights the diverse ways the beta-alpha-beta building block can be assembled into an active enzyme, and provides further insight into the molecular basis of the low-level CaaD activity in 4-OT.

A light-activated reaction analog has been developed to mimic the catalytic reaction cycle of Delta(5)-3-ketosteroid isomerase to probe the functionally relevant protein solvation response to the catalytic charge transfer. Delta(5)-3-ketosteroid isomerase from Pseudomonas putida catalyzes a C-H bond cleavage and formation through an enolate intermediate. Conversion of the ketone substrate to the enolate intermediate is simulated by a photoacid bound to the active site oxyanion hole. In the ground state, the photoacid electrostatically resembles the enolate intermediate while the low pK(a) excited state resembles the ketone starting material. Time-resolved fluorescence experiments with photoacids coumarin 183 and equilenin show the active site of Delta(5)-3-ketosteroid isomerase to be largely unperturbed by the light-activated reaction. The small solvation response for the photoacid at the active site as compared with a simple solvent suggests the active site does not significantly change its electrostatic environment during the catalytic cycle. Instead, the reaction takes place in an electrostatically preorganized environment.

The aconitase family of hydro-lyase enzymes includes three classes of proteins that catalyze the isomerization of alpha-hydroxy acids to beta-hydroxy acids. Besides aconitase, isopropylmalate isomerase (IPMI) proteins specifically catalyze the isomerization of alpha,beta-dicarboxylates with hydrophobic gamma-chain groups, and homoaconitase (HACN) proteins catalyze the isomerization of tricarboxylates with variable chain length gamma-carboxylate groups. These enzymes' stereospecific hydro-lyase activities make them attractive catalysts to produce diastereomers from unsaturated precursors. However, sequence similarity and convergent evolution among these proteins lead to widespread misannotation and uncertainty about gene function. To find the substrate specificity determinants of homologous IPMI and HACN proteins from Methanocaldococcus jannaschii, the small-subunit HACN protein (MJ1271) was crystallized for X-ray diffraction. The structural model showed characteristic residues in a flexible loop region between alpha2 and alpha3 that distinguish HACN from IPMI and aconitase proteins. Site-directed mutagenesis of MJ1271 produced loop-region variant proteins that were reconstituted with wild-type MJ1003 large-subunit protein. The heteromers formed promiscuous hydro-lyases with reduced activity but broader substrate specificity. Both R26K and R26V variants formed relatively efficient IPMI enzymes, while the T27A variant had uniformly lower specificity constants for both IPMI and HACN substrates. The R26V T27Y variant resembles the MJ1277 IPMI small subunit in its flexible loop sequence but demonstrated the broad substrate specificity of the R26V variant. These mutations may reverse the evolution of HACN activity from an ancestral IPMI gene, demonstrating the evolutionary potential for promiscuity in hydro-lyase enzymes. Understanding these specificity determinants enables the functional reannotation of paralogous HACN and IPMI genes in numerous genome sequences. These structural and kinetic results will help to engineer new stereospecific hydro-lyase enzymes for chemoenzymatic syntheses.

Incubations of isotopically pure [2-(2)H(1)](E,E)-farnesyl diphosphate with recombinant patchoulol synthase (PTS) from Pogostemon cablin afforded a 65:35 mixture of monodeuterated and dideuterated patchoulols as well as numerous sesquiterpene hydrocarbons. Extensive NMR analyses ((1)H and (13)C NMR, (1)H homodecoupling NMR, HMQC, and (2)H NMR) of the labeled patchoulol mixture and comparisons of the spectra with those of unlabeled alcohol led to the conclusion that the deuterium label was located at positions (patchoulol numbering system) C5 (both isotopomers, ca. 100%) and C12 (minor isotopomer, 30-35%), that is, an approximately 2:1 mixture of [5-(2)H(1)]- and [5,12-(2)H(2)]-patchoulols. Low-resolution FIMS analyses and isotope ratio calculations further corroborated the composition of the mixture as mainly one singly deuterated and one doubly deuterated patchoulol. From a mechanistic point of view, the formation of [5,12-(2)H(2)]patchoulol is rationalized through the intermediacy of an unknown exocyclic [7,10:1,5]patchoul-4(12)-ene (15-d(1)), which could incorporate a deuteron at the C-12 position on the pathway to doubly labeled patchoulol. The corresponding depletion of deuterium content observed in the hydrocarbon coproducts, beta-patchoulene and alpha-guaiene (55% d(0)), identified the source of the excess label found in patchoulol-d(2). Comparison of the PTS amino acid sequence with those of other sesquiterpene synthases, and examination of an active site model, suggested that re-orientation of leucine 410 side chain in PTS might facilitate the creation of a 2-pocket active site where the observed deuteron transfers could occur. The retention of deuterium at C5 in the labeled patchoulol and its absence at C4 rule out an alternative mechanism involving two consecutive 1,2-hydride shifts and appears to confirm the previously proposed occurrence of a 1,3-hydride shift across the 5-membered ring. A new, semisystematic nomenclature is presented for the purpose of distinguishing the three different skeletal structures of the patchoulane sesquiterpenes.

Aristolochene synthase from Penicillium roqueforti (PR-AS) catalyzes the formation of the bicyclic sesquiterpene (+)-aristolochene (5) from farnesyl diphosphate (1, FDP) in two mechanistically distinct cyclization reactions. The first reaction transforms farnesyl diphosphate to the uncharged intermediate (S)-(-)-germacrene A (3) through a macrocyclization process that links C1 and C10 upon magnesium ion-assisted diphosphate ester activation. In the second reaction mediated by PR-AS, a protonation induced cyclization has been suggested to generate the highly reactive trans-fused eudesmane cation 4 as a consequence of the precise folding of the enzyme-bound germacrene A intermediate. This contribution describes the use of the transition state analogue inhibitor 4-aza-eudesm-11-ene to explore the intermediacy of cation 4 as an on-path intermediate in the biosynthesis of aristolochene. 4-Aza-eudesm-11-ene as the hydrochloride salt 6 was stereospecifically synthesized in seven steps and 37% overall yield starting from chiral enamine 9. The synthetic sequence featured a highly regio- and stereoselective deracemization reaction of 9 that gave rise to the corresponding Michael adduct in >95% diastereomeric excess as evidenced by optical rotation and NMR measurements. 6 acts as a potent competitive inhibitor of PR-AS (K(i) = 0.35 +/- 0.12 microM) independent of the presence of diphosphate (K(i) = 0.24 +/- 0.09 microM). The failure of exogenous PP(i) to enhance the binding affinity of 6 for PR-AS could be interpreted against an eudesmyl cation/diphosphate anion pair mechanism as the enzymatic strategy to stabilize the highly reactive eudesmane cation 4. In addition, these observations seem to rule out simple favorable electrostatic and/or hydrogen bonding interactions between the active site anchored diphosphate ion and the ammonium ion 6 as the binding mode. Ammonium ion 6 seems to act as a genuine mimic of eudesmane cation (4) that most likely binds the active site of PR-AS in a productive conformation resembling that adapted by 4 during the PR-AS-catalyzed synthesis of 5.

Availability of isotope-labelled metabolites often proves to be an essential prerequisite for the successful identification of a biosynthetic pathway. Also for the metabolic engineering isotope-labelled, either radioactive or non-radioactive, biosynthetic intermediates represent valuable tools for the assessment of metabolic flux, identification of unexpected biosynthetic side reactions, or for the confirmation of the functionality of the engineered reaction step. Most often the required compounds are neither available commercially nor prepared by chemical means within an acceptable time span and effort. Biocatalytic synthesis of early pathway intermediates may offer an attractive solution for this problem. For the metabolic engineering of taxol biosynthesis in a heterologous host, like yeast, isotope-labelled taxanes represent useful tools for the establishment and functional assessment of the introduced biosynthetic steps. Using Taxus chinensis taxadiene synthase expressed in the heterologous organism Pichia pastoris, we describe a method for the biocatalytic synthesis of tritium ((3)H)-labelled taxa-4(5),11(12)-diene, which represents the pathway committing biosynthetic precursor for all taxoid diterpenoids.

When methyl-substituted aromatic compounds are degraded via ortho (intradiol)-cleavage of 4-methylcatechol, the dead-end metabolite 4-methylmuconolactone (4-ML) is formed. Degradation of 4-ML has only been described in few bacterial species, including Pseudomonas reinekei MT1. The isomerization of 4-ML to 3-methylmuconolactone (3-ML) is the first step required for the mineralization of 4-ML and is catalyzed by an enzyme termed 4-methylmuconolactone methylisomerase (MLMI). We identified the gene encoding MLMI in P. reinekei MT1 and solved the crystal structures of MLMI in complex with 3-ML at 1.4-A resolution, with 4-ML at 1.9-A resolution and with a MES buffer molecule at 1.45-A resolution. MLMI exhibits a ferredoxin-like fold and assembles as a tight functional homodimeric complex. We were able to assign the active site clefts of MLMI from P. reinekei MT1 and of the homologous MLMI from Cupriavidus necator JMP134, which has previously been crystallized in a structural genomics project. Kinetic and structural analysis of wild-type MLMI and variants created by site-directed mutagenesis indicate Tyr-39 and His-26 to be the most probable catalytic residues. The previously proposed involvement of Cys-67 in covalent catalysis can now be excluded. Residue His-52 was found to be important for substrate affinity, with only marginal effect on catalytic activity. Based on these results, a novel catalytic mechanism for the isomerization of 4-ML to 3-ML by MLMI, involving a bislactonic intermediate, is proposed. This broadens the knowledge about the diverse group of proteins exhibiting a ferredoxin-like fold.

The tRNA-modifying enzyme tRNA-guanine transglycosylase (Tgt) is a putative target for new selective antibiotics against Shigella bacteria. The formation of a Tgt homodimer was suggested on the basis of several crystal structures of Tgt in complex with RNA. In the present study, noncovalent mass spectrometry was used (i) to confirm the dimeric oligomerization state of Tgt in solution and (ii) to evidence the binding stoichiometry of the complex formed between Tgt and its full-length substrate tRNA. To further investigate the importance of Tgt protein-protein interaction, point mutations were introduced into the dimer interface in order to study their influence on the formation of the catalytically active complex. Enzyme kinetics revealed a reduced catalytic activity of these mutated variants, which could be related to a destabilization of the dimer formation as evidenced by both noncovalent mass spectrometry and X-ray crystallography. Finally, the effect of inhibitor binding was investigated by noncovalent mass spectrometry, thus providing the binding stoichiometries of Tgt:inhibitor complexes and showing competitive interactions in the presence of tRNA. Inhibitors that display an influence on the formation of the dimer interface in the crystal structure are promising candidates to alter the protein-protein interaction, which could provide a new way to inhibit Tgt.

The last steps of the Leu biosynthetic pathway and the Met chain elongation cycle for glucosinolate formation share identical reaction types suggesting a close evolutionary relationship of these pathways. Both pathways involve the condensation of acetyl-CoA and a 2-oxo acid, isomerization of the resulting 2-malate derivative to form a 3-malate derivative, the oxidation-decarboxylation of the 3-malate derivative to give an elongated 2-oxo acid, and transamination to generate the corresponding amino acid. We have now analyzed the genes encoding the isomerization reaction, the second step of this sequence, in Arabidopsis thaliana. One gene encodes the large subunit and three encode small subunits of this enzyme, referred to as isopropylmalate isomerase (IPMI) with respect to the Leu pathway. Metabolic profiling of large subunit mutants revealed accumulation of intermediates of both Leu biosynthesis and Met chain elongation, and an altered composition of aliphatic glucosinolates demonstrating the function of this gene in both pathways. In contrast, the small subunits appear to be specialized to either Leu biosynthesis or Met chain elongation. Green fluorescent protein tagging experiments confirms the import of one of the IPMI small subunits into the chloroplast, the localization of the Met chain elongation pathway in these organelles. These results suggest the presence of different heterodimeric IPMIs in Arabidopsis chloroplasts with distinct substrate specificities for Leu or glucosinolate metabolism determined by the nature of the different small subunit.

(+)-Delta-cadinene synthase (DCS) from Gossypium arboreum (tree cotton) is a sesquiterpene cyclase that catalyzes the cyclization of farnesyl diphosphate in the first committed step of the biosynthesis of gossypol, a phytoalexin that defends the plant from bacterial and fungal pathogens. Here, we report the X-ray crystal structure of unliganded DCS at 2.4 A resolution and the structure of its complex with three putative Mg(2+) ions and the substrate analogue inhibitor 2-fluorofarnesyl diphosphate (2F-FPP) at 2.75 A resolution. These structures illuminate unusual features that accommodate the trinuclear metal cluster required for substrate binding and catalysis. Like other terpenoid cyclases, DCS contains a characteristic aspartate-rich D(307)DTYD(311) motif on helix D that interacts with Mg(2+)(A) and Mg(2+)(C). However, DCS appears to be unique among terpenoid cyclases in that it does not contain the "NSE/DTE" motif on helix H that specifically chelates Mg(2+)(B), which is usually found as the signature sequence (N,D)D(L,I,V)X(S,T)XXXE (boldface indicates Mg(2+)(B) ligands). Instead, DCS contains a second aspartate-rich motif, D(451)DVAE(455), that interacts with Mg(2+)(B). In this regard, DCS is more similar to the isoprenoid chain elongation enzyme farnesyl diphosphate synthase, which also contains two aspartate-rich motifs, rather than the greater family of terpenoid cyclases. Nevertheless, the structure of the DCS-2F-FPP complex shows that the structure of the trinuclear magnesium cluster is generally similar to that of other terpenoid cyclases despite the alternative Mg(2+)(B) binding motif. Analyses of DCS mutants with alanine substitutions in the D(307)DTYD(311) and D(451)DVAE(455) segments reveal the contributions of these segments to catalysis.

The catalytic mechanism of Propionibacterium acnes polyunsaturated fatty acid isomerase (PAI) is explored by kinetic, spectroscopic, and thermodynamic studies. The PAI-catalyzed double bond isomerization takes place by selective removal of the pro-R hydrogen from C-11 followed by suprafacial transfer of this hydrogen to C-9 as shown by conversion of C-9-deuterated substrate isotopologs. Data on the midpoint potential, photoreduction, and cofactor replacement suggest PAI to operate via an ionic mechanism with the formation of FADH(2) and linoleic acid carbocation as intermediates. In line with this proposal, no radical intermediates were detected neither by stopped flow absorption nor by EPR spectroscopy. The substrate preference toward free fatty acids is determined by the interaction between Arg-88 and Phe-193, and the reaction rate is strongly affected by replacement of these amino acids, indicating that the efficiency of the hydrogen transfer relies on a fixed distance between the free carboxyl group and the N-5 atom of FAD. Combining data obtained for PAI from the structural studies and experiments described here suggests that at least two different prototypical active site geometries exist among polyunsaturated fatty acid double bond isomerases.

Monotopic membrane proteins bind tightly to cell membranes but do not generally span the lipid bilayer. Their interactions with lipid bilayers may be studied via coarse-grained molecular dynamics (CG-MD) simulations. Understanding such interactions is important as monotopic enzymes frequently act on hydrophobic substrates, while X-ray structures rarely provide direct information about their interactions with membranes. CG-MD self-assembly simulations enable prediction of the orientation and depth of insertion into a lipid bilayer of a monotopic protein, and also of the interactions of individual protein residues with lipid molecules. The CG-MD method has been evaluated via comparison with extended (>30 ns) atomistic simulations of monoamine oxidase, revealing good agreement between the results of coarse-grained and atomistic simulations. CG-MD simulations have been applied to a set of 11 monotopic proteins for which three-dimensional structures are available. These proteins may be divided into two groups on the basis of the results of the simulations. One group consists of those proteins which are inserted into the lipid bilayer to a limited extent, interacting mainly at the phospholipid-water interface. The second group consists of those which are inserted more deeply into the bilayer. Those monotopic proteins which are inserted more deeply cause significant local perturbation of bilayer properties such as bilayer thickness. Deeper insertion seems to correlate with a greater number of basic residues in the "foot" whereby a monotopic protein interacts with the membrane.

4-Oxalocrotonate tautomerase enzyme (4-OT) catalyzes the isomerization of 2-oxo-4-hexenedioate to 2-oxo-3-hexenedioate. The chemical process involves two proton transfers, one from a carbon of the substrate to the nitrogen of Pro1 and another from this nitrogen atom to a different carbon of the substrate. In this paper the isomerization has been studied using the combined quantum mechanical and molecular mechanical method with a dual-level treatment of the quantum subsystem employing the MPW1BK density functional as the higher level. Exploration of the potential energy surface shows that the process is stepwise, with a stable intermediate state corresponding to the deprotonated substrate and a protonated proline. The rate constant of the overall process has been evaluated using ensemble-averaged variational transition state theory, including the quantized vibrational motion of a primary zone of active-site atoms and a transmission coefficient based on an ensemble of optimized reaction coordinates to account for recrossing trajectories and optimized multidimensional tunneling. The two proton-transfer steps have similar free energy barriers, but the transition state associated with the first proton transfer is found to be higher in energy. The calculations show that reaction progress is coupled to a conformational change of the substrate, so it is important that the simulation allows this flexibility. The coupled conformational change is promoted by changes in the electron distribution of the substrate that take place as the proton transfers occur.

Terpene synthases (TPS) require divalent metal ion co-factors, typically magnesium, that are bound by a canonical DDXXD motif, as well as a putative second, seemingly less well conserved and understood (N/D)DXX(S/T)XXXE motif. Given the role of the Ser/Thr side chain hydroxyl group in ligating one of the three catalytically requisite divalent metal ions and the loss of catalytic activity upon substitution with Ala, it is surprising that Gly is frequently found in this 'middle' position of the putative second divalent metal binding motif in plant TPS. Herein we report mutational investigation of this discrepancy in a model plant diterpene cyclase, abietadiene synthase from Abies grandis (AgAS). Substitution of the corresponding Thr in AgAS with Ser or Gly decreased catalytic activity much less than substitution with Ala. We speculate that the ability of Gly to partially restore activity relative to Ala substitution for Ser/Thr stems from the associated reduction in steric volume enabling a water molecule to substitute for the hydroxyl group from Ser/Thr, potentially in a divalent metal ion coordination sphere. In any case, our results are consistent with the observed conservation pattern for this putative second divalent metal ion binding motif in plant TPS.

Coenzyme B(12)-dependent mutases are radical enzymes that catalyze reversible carbon skeleton rearrangement reactions. Here we describe Rhodobacter sphaeroides ethylmalonyl-CoA mutase (Ecm), a novel member of the family of coenzyme B(12)-dependent acyl-CoA mutases, that operates in the recently discovered ethylmalonyl-CoA pathway for acetate assimilation. Ecm is involved in the central reaction sequence of this novel pathway and catalyzes the transformation of ethylmalonyl-CoA to methylsuccinyl-CoA in combination with a second enzyme that was further identified as promiscuous ethylmalonyl-CoA/methylmalonyl-CoA epimerase. In contrast to the epimerase, Ecm is highly specific for its substrate, ethylmalonyl-CoA, and accepts methylmalonyl-CoA only at 0.2% relative activity. Sequence analysis revealed that Ecm is distinct from (2R)-methylmalonyl-CoA mutase as well as isobutyryl-CoA mutase and defines a new subfamily of coenzyme B(12)-dependent acyl-CoA mutases. In combination with molecular modeling, two signature sequences were identified that presumably contribute to the substrate specificity of these enzymes.

Tautomerase superfamily members have an amino-terminal proline and a beta-alpha-beta fold, and include 4-oxalocrotonate tautomerase (4-OT), 5-(carboxymethyl)-2-hydroxymuconate isomerase (CHMI), trans- and cis-3-chloroacrylic acid dehalogenase (CaaD and cis-CaaD, respectively), malonate semialdehyde decarboxylase (MSAD), and macrophage migration inhibitory factor (MIF), which exhibits a phenylpyruvate tautomerase (PPT) activity. Pro-1 is a base (4-OT, CHMI, the PPT activity of MIF) or an acid (CaaD, cis-CaaD, MSAD). Components of the catalytic machinery have been identified and mechanistic hypotheses formulated. Characterization of new homologues shows that these mechanisms are incomplete. 4-OT, CaaD, cis-CaaD, and MSAD also have promiscuous activities with a hydratase activity in CaaD, cis-CaaD, and MSAD, PPT activity in CaaD and cis-CaaD, and CaaD and cis-CaaD activities in 4-OT. The shared promiscuous activities provide evidence for divergent evolution from a common ancestor, give hints about mechanistic relationships, and implicate catalytic promiscuity in the emergence of new enzymes.

The biotransformation of linoleic acid (LA) into conjugated linoleic acid (CLA) by microorganisms is a potentially useful industrial process. In most cases, however, the identities of proteins involved and the details of enzymatic activity regulation are far from clear. Here we summarize available data on the reaction mechanisms of CLA-producing enzymes characterized until now, from Butyrivibrio fibrisolvens, Lactobacillus acidophilus, Ptilota filicina, and Propionibacterium acnes. A general feature of enzymatic LA isomerization is the protein-assisted abstraction of an aliphatic hydrogen atom from position C-11, while the role of flavin as cofactor for the double bond activation in CLA-producing enzymes is also discussed with regard to the recently published three-dimensional structure of an isomerase from P. acnes. Combined data from structural studies, isotopic labeling experiments, and sequence comparison suggest that at least two different prototypical active site geometries occur among polyunsaturated fatty acid (PUFA) double bond isomerases.