Search

The effects of different mixed external donors on the crystallization behavior and sequence length distribution of polypropylene prepared by MgCl2-supported TiCl4 Ziegler-Natta catalyst were studied through successive self-nucleation and annealing (SSA) technique. The SSA results show that the crystallization ability and the relative contents of long isotactic sequence length gradually increase with the increase of the relative component of Donor-1 (cyclohexylmethyldimethoxysilane, dicyclohexyl(dimethoxy)silane, and dipiperidinedimethoxysilane) in the different mixed external donors when the ratio of the mixed external donors/Ti (Si/Ti) is unchanged. The thickness distribution of lamellar also becomes broader, indicating the sequence length distribution of polypropylene gets broader. The crystallization ability and the relative contents of long isotactic sequence length of polypropylene prepared by the mixed cyclohexylmethyldimethoxysilane and n-propyltriethoxysilane (CN) external donors are lowest. However, the effect of the mixed dicyclohexyl(dimethoxy)silane and n-propyltriethoxysilane (HN) and the mixed dipiperidinedimethoxysilane and n-propyltriethoxysilane (PyN) external donors on the crystallization ability and sequence length of polypropylene are more significantly. Especially, the relative content of long isotactic sequence length increases sharply from 0.2 to 27.5% in the polypropylene chain of sample prepared by the mixed PyN external donors when the proportion of Donor 1 is running up to 90%. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 [ABSTRACT FROM AUTHOR]

A series of star block polymers with a hyperbranched core and 26 arms are successfully synthesized by atom transfer radical polymerization of styrene (St), and poly(ethylene glycol) methyl ether methacrylate from a hyperbranched polystyrene (HBPS) multifunctional initiator. All-solid polymer electrolytes composed of these multiarm star polymers and lithium salts are prepared. The influences of polyoxyethylene (PEO) side-chain length, PEO content, lithium salt concentration and type, and the structure of polymer on ionic conductivity are systematically investigated. The resulting polymer electrolyte with the longest PEO side chains exhibits the best ionic conductive properties. The maximum conductivity is 0.8 × 10−4 S cm−1 at 25°C with EO/Li = 30. All the prepared multiarm star block polymers possess good thermal stability. The mechanical property is greatly improved owing to the existence of polystyrene blocks in the multiarm star polymer molecules, and flexible films can be obtained by solution-casting technique. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 [ABSTRACT FROM AUTHOR]

As the external donor in Ziegler-Natta catalysts have an important influence on the stereo-defects distribution of polypropylene, the effects of the mixed external donors (the mixture of Donor-C (cyclohexylmethyldimethoxysilane) and Donor-N ( n-propyltriethoxysilane) ) on the isotactic sequence length and its distribution of polypropylene prepared by Ziegler-Natta catalyst through propylene bulk polymerization were studied through the Successive self-nucleating and annealing (SSA) and C-NMR techniques. The SSA results showed that the relative contents of the highest isotactic component and the lamellar thickness in the polypropylene chain gradually increased with the increase of the relative component of Donor-C in the C/N mixed external donors, indicating the isotactic sequence length of polypropylene got longer, and the lamellar thickness distribution of polypropylene became broader, revealing the isotactic sequence length distribution of polypropylene got broader. In addition, the C-NMR results showed that the average meso isotactic sequence length ( MSL) of polypropylene gradually increased with the increase of the content of Donor-C in the C/N mixed external donors, which was in good coincident with the results calculated from SSA, showing a good correspondence between the SSA and C-NMR techniques. [ABSTRACT FROM AUTHOR]

MgCl2/TiCl4/diether is a fifth-generation Ziegler-Natta catalyst for the commercial polymerization of propylene. The outstanding features of this catalyst are the high activity and high isotacticity for propylene polymerization without using an external electron donor. In this study, we explored the copolymerization of propylene and 1-octene with MgCl2/TiCl4/diether catalyst. It was found that MgCl2/TiCl4/diether catalyst showed higher polymerization activity and led to greater 1-octene content incorporation, compared with a fourth-generation Ziegler-Natta catalyst (MgCl2/TiCl4/diester). With an increase in 1-octene incorporation in polypropylene chains, the melting temperature, glass transition temperature and crystallinity of the copolymers decreased distinctly. The microstructures of the copolymers were characterized using 13C NMR spectroscopy, and the copolymer compositions and number-average sequence lengths were calculated from the dyad concentration and distribution. This result is very important for the in-reactor polyolefin alloying process, especially for the case of a single catalyst and two-step (or two-reactor) process. Copyright © 2011 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

Discusses the synthesis of well-defined functional polyethylene graft copolymer via atom transfer radical polymerization (ATRP) process. Transformation of the pendant styrene groups into ATRP initiator sites; Determination of the quantitative hydrochlorination reaction; Lack of polar functional groups on its polymer chain.

Investigates the polymerization method in the preparation of long-branched polyethylene (LBPE). Use of late transition metal and metallocene catalysts; Characteristics of LBPE; Determination of narrow molecular weight distribution.

Examines the polymerization of a linear low-density polyethylene. Observation of high activity in the catalytic system; Determination of the melting point of the polymer; Production of narrow molecular weight distribution.

Reports on the preparation of a series of high molecular weight amphiphilic graft copolymers. Esterification of the copolymers under different conditions; Study of the composition using nuclear magnetic resonance and fourier transform infrared spectroscopy.

Polyethylene based polyurethanes (PE-PUs) with 20% ethyl branches were synthesized through hydrogenation reaction of linear and thermoplastic hydroxyl-terminated polybutadiene based polyurethanes (HTPB-PUs), which has not been explored widely. Linear and thermoplastic HTPB-PUs with Mw ranged from 130~280 kg/mol were synthesized by microwave-assisted reaction. More importantly, we systematically researched a series of reaction conditions to ensure the degree of hydrogenation meanwhile slow down the extent of degradation reaction of urethane bond. In addition, structure and thermal performance of PE-PUs have been investigated in the present work by NMR, FT-IR, DSC and TGA. The Mw of PE-PUs ranging from 120~207 kg/mol were carried out with a high temperature GPC. Moreover, the degree of crystalline of PE-PUs with 20% ethyl branches at the range of 10% to 33% were further explored by X-ray diffraction, which in turn certify that the PE-PUs possess certain strength but lower than polyethylene with no branches. [ABSTRACT FROM AUTHOR]

Reversible addition-fragmentation chain transfer radical polymerization of styrene and maleic anhydride was successfully performed in continuous-flow microreactor. Results of the structural characterization showed that the obtained styrene-maleic anhydride (SMA) copolymers possessed controlled molecular weight, low dispersity and alternating structures. Subsequently, effects of the polymerization conditions, including reaction pressure, temperature, feed flowrate and tube length, on the polymerization kinetics and molecular structure of the SMA copolymers were investigated in detail. It was found that the reaction rate was increased as the reaction temperature increased within certain limits, as well as the feed flowrate due to the increased mass and heat transfer efficiency. Besides, first-order kinetics of the polymerization was observed when the reaction times were adjusted by only changing the tube length. Good stability was exhibited when the reaction conducted continuously for 10 h. This approach can reduce the reaction time significantly from several hours to about half an hour. [ABSTRACT FROM AUTHOR]

A novel macromolecular auxiliary antioxidant with polyethylene (PE) as polymer skeleton and phosphites as side groups is prepared based on commercial ethylene‐vinyl acetate (EVA) copolymers and its potential as polyolefin stabilizers is studied in depth. The synthesis approach of this PE‐grafted antioxidant consists of a typical EVA hydrolysis reaction and a two‐step nucleophilic substitution reaction of PCl3, 2,4‐di‐tert‐butylphenol, and the hydrolysis product. Results of the thermogravimetric analysis show that the macromolecular structures endow the as‐synthesized antioxidant with much better thermal stability than that of the commercial antioxidant 168. In addition, antioxidant behaviors of the PE‐grafted antioxidants in polypropylene (PP) matrix are investigated in detail through characterization of the melt flow index of multiple‐extruded stabilized PP as well as the short‐term oxidation induction time test and the long‐term thermo‐oxidative aging test. Results show that even with extremely low content of the effective antioxidant groups, the as‐synthesized macromolecular antioxidant still has excellent antioxygenic properties. [ABSTRACT FROM AUTHOR]

Carbon nanoforms (CNFs, including graphene, carbon nanotube and fullerene) were functionalized via microwave-assisted thiol-ene click chemistry. Different functional CNFs with −COOH, −NH 2 , −NH 3 Cl,-Si(OCH 3 ) 3 , alkyl and furyl groups were obtained and characterized by XPS, EDS, TGA, Raman spectroscopy and MALDI-TOF MS. Microwave was much more efficient to promote reactions than traditional thermal method. XPS confirmed the binding energy of C-S-C (163.3ev) the modified CNFs. Raman spectroscopy showed increasing I D /I G and A D /A G of graphene and CNT after thiol-ene addition reaction. The result of MALDI-TOF MS indicated that the thiol-containing molecules were attached on fullerene. All these results indicated the successful thiol-ene click reactions between CNFs and thiol-containing molecules under microwave. TGA analysis results showed the mass loss of the modified CNFs, which provided that AIBN and 3-merlaptopropionic acid were the most efficient initiator and monomer, respectively. In summary, the microwave-assisted thiol-ene click reaction provided a powerful chemical tool for the preparation of functional CNFs materials. [ABSTRACT FROM AUTHOR]