Search

Used cooking oils (UCOs) have a high potential as renewable fuels for the maritime shipping industry. However, their corrosiveness during storage and usage are some of the concerns yet to be investigated for addressing compatibility issues. Thus, the corrosion of steels and copper exposed to the UCOs was studied through the immersion of metal rods for different periods. The changes on the rod surfaces were analyzed with a scanning electron microscope (SEM). After the immersion, the copper concentration dissolved in the bio-oils was measured using inductively coupled plasma-optical emission spectrometry (ICP-OES). The free fatty acids and glycerides were analyzed using gas chromatography with flame ionization detection (GC-FID). The acid number (AN), water concentration, as well as density and kinematic viscosity of the bio-oils were determined with standard methods. The UCOs with the highest water content were corrosive, while the oils with lower water concentrations but higher ANs induced lower corrosion. After mixing two different UCOs, the metal corrosion decreased with an increasing concentration of the oil with lower corrosive properties. The lower corrosion properties were most likely due to the monounsaturated fatty acids, e.g., oleic acid in oils. These acids formed a barrier layer on the rod surfaces, thereby inhibiting the permeation of oxygen and water to the surface. Even adding 0.025 wt% of tert-butylamine decreased the corrosivity of UCO against polished steel rod. The results suggested that mixing several oil batches and adding a suitable inhibitor reduces the potential corrosive properties of UCOs. [ABSTRACT FROM AUTHOR]

Waste fish oils (FOs) and used cooking vegetable oils (UCOs) are increasingly becoming alternative renewable fuels. However, different physicochemical aspects of these renewable fuels, including the effect of storage, are not well-known. In this work, the effect of the storage period on physicochemical properties of selected samples of FOs and UCOs was investigated. The bio-oils were stored at 4 °C for up to five years before each experimentation. The chemical properties were characterized using capillary gas chromatography with flame ionization detection (GC-FID) and high-performance size exclusion chromatography including an evaporative light scattering detector (HPSEC-ELSD). Water contents and acid numbers of the bio-oils were determined using the Karl Fischer (KF) titration and the ASTM D 664 methods. Furthermore, the average heating values and surface tension of the bio-oils were determined. According to the results obtained, for all bio-oil types, the concentrations of polymerized triglycerides, diglycerides, and fatty acids and monoglycerides had increased during the storage periods. The physical properties of the bio-oils also showed a small variation as a function of the storage period. The overall results observed indicate that the deterioration of the physicochemical properties of bio-oils can be controlled through storage in dark, dry, and cold conditions. [ABSTRACT FROM AUTHOR]