Search

Purpose: To evaluate the effect of urethane methacrylate precursor (UMP) on the enzymatic resistance of demineralized dentin (DD) matrices. Materials and Methods: Experimental treatments containing 0 (control), 1, and 5 mmol/L UMP dissolved in an acetone (Ace) solution were formulated. Dentin matrix specimens were demineralized in vitro and immersed in the experimental treatments for 1 h. The treated specimens were then stored in 0.1 mg/mL collagenase solution for 24 h, after which their dry mass loss and hydroxyproline (HYP) release were assessed. The swelling ratios of specimens in each group were also evaluated. The interaction between UMP and the dentin matrix was observed using field-emission scanning electron microscopy (FE-SEM). Endogenous enzyme activity in dentin was evaluated using confocal laser scanning microscopy (CLSM). Results: Compared with the other treatment groups, treatment with 1 mM and 5 mM UMP-Ace significantly decreased the dry mass loss, HYP release and swelling ratio of the DD matrix (p < 0.05). FE-SEM and CLSM observations showed that treatment with UMP-Ace protected the structure of the dentin matrix and decreased porosity within the dentin-collagen network. Conclusion: Treatment with 1 mM and 5 mM UMP-Ace protects DD matrix against collagenase degradation and may be clinically useful for improving the durability of the hybrid layer. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the effect of adhesive type and long-term aging on the shear bond strength (SBS) between silicabased ceramics and composite cement (CC). Materials and Methods: Lithium-silicate (LS), feldspathic (FD) and polymer-infiltrated ceramic (PIC) blocks were sectioned (10 x 12 x 2 mm) and divided into 24 groups considering the factors: "ceramics" (LS, FD, and PIC), "adhesive" (Ctrl: without adhesive; 2SC: 2-step conventional; 3SC: 3-step conventional; 1SU: 1-step universal), and "aging" (non-aged or aged [A]). After the surface treatments, CC cylinders (n = 15, ɸ=2mm; height = 2mm) were made and half of the samples were subjected to thermocycling (10,000) and stored in water at 37°C for 18months. The samples were submitted to SBS testing (100 kgf, 1mm/min) and failure analysis. Extra samples were prepared for microscopic analysis of the adhesive interface. SBS (MPa) data was analyzed by 3-way ANOVA and Tukey's test (5%). Weibull analysis was performed on the SBS data. Results: All factors and interactions were significant for SBS (p<0.05). Before aging, there was no significant difference between the tested groups and the respective control groups. After aging, the LS_1SU (22.18±7.74) and LS_2SC (17.32±5.86) groups exhibited significantly lower SBS than did the LS_Ctrl (30.30±6.11). Only the LS_1SU group showed a significant decrease in SBS after aging vs without aging. The LS_1SU (12.20) group showed the highest Weibull modulus, which was significantly higher than LS_2SC_A (2.82) and LS_1SU_A (3.15) groups. Conclusion: No type of adhesive applied after silane benefitted the long-term adhesion of silica-based ceramics to CC in comparison to the groups without adhesive. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the antibacterial effects of Terminalia catappa Linn (TCL) leaf extracts at different concentrations and the effects of these extracts used as primers on the long-term adhesive properties of two universal adhesives. Materials and Methods: After extract preparation, the antimicrobial and antibacterial activities of TCL against Streptococcus mutans (UA 159) were assessed in microdilution assays to provide the minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC). Additionally, to provide quantitative data on the ability of TCL extract to reduce cell viability, colony forming units (CFU) were counted. To examine adhesive properties, 288 human molars were randomly assigned to 32 experimental conditions (n = 9) according to the following variables: (1) treatment agent: negative control (untreated surface), and primers at concentrations of 1xMIC, 5xMIC, and 10xMIC; (2) adhesives: Scotchbond Universal (SBU) and Futurabond Universal (FBU); (3) adhesive strategy: etch-and-rinse (ER) or self-etch (SE); and (4) storage time: 24 h or after 2 years. Primers were applied for 60 s, upon which the teeth were incrementally restored and sectioned into adhesive-dentin bonded sticks. These were tested for microtensile bond strength (pTBS) and nanoleakage (NL) after 24-h and 2-year water storage, as well as in-situ degree of conversion (DC) at 24 h. The chemical profile of the hybrid layer was determined via micro-Raman spectroscopy. Biofilm assay data were analyzed using the Kruskal-Wallis test; the pH of culture media and the chemical profile were analyzed by one-way ANOVA. The adhesive properties (pTBS, NL, DC) were evaluated using a four-way ANOVA and Tukey's test. Significance was set at 5%. Results: Similar values of MIC and MBC were observed (2 mg/ml), showing bactericidal potential. CFU analysis demonstrated that concentrations of 5xMIC and 10xMIC significantly inhibited biofilm formation (p < 0.001). The application of the TCL primer at all concentrations significantly increased the immediate pTBS and DC, and decreased the immediate NL values when compared to the control group (p < 0.05), regardless of the adhesive and adhesive strategies. Despite an increase in the NLvalues for all groups after2years (p > 0.05), in groups where the TCL primerwas applied, the pTBS remained constant after 2 years for both adhesives, while a decrease in the pTBS was observed in the control groups (p < 0.05). Usually, IOxMIC showed better results than 1xMIC and 5xMIC (p < 0.05). The application of TCL promoted cross-linking; cross-linking rates increased proportionally to the concentration of TCL (p < 0.05). Conclusion: Primers containing TCL promoted bactericidal and bacteriostatic action, as well as cross-linking with dentin, while maintaining the adhesive properties of the adhesive-dentin interface after 2 years of water storage. [ABSTRACT FROM AUTHOR]

Purpose: This study investigated and compared the bond strengths, microleakage, microgaps, and marginal adaptation of self-adhesive resin composites (SAC) to dentin with or without universal adhesives. Materials and Methods: Dentin surfaces of 75 molars were prepared for shear and microtensile bond strength testing (SBS and μTBS). Silicon molds were used to build up direct restorations using the following materials to form 5 groups: 1. Surefil One; 2. Prime&Bond active Universal Adhesive + Surefil One; 3. Vertise Flow; 4. OptiBond Universal + Vertise Flow; 5. Scotchbond Universal + Filtek Z500 (control group). Bonded specimens were thermocycled 10,000x before being tested either for SBS or μTBS using a universal testing machine at a crosshead speed of 0.5mm/min. Direct mesial and distal class-II cavities were created on 100 sound premolars, with the gingival margin of distal cavities placed below CEJ and restored according to the five groups. After thermocycling, microleakage scores were assessed following immersion of restored premolars in 2% methylene blue dye for 24h, while marginal gaps and adaptation percentages were investigated on epoxy resin replicas under SEM at magnifications of 2000X and 200X, respectively. Results were statistically analyzed with parametric and non-parametric tests as applicable, with a level of significance set at a = 0.05. Results: Bond strengths, microleakage scores, microgaps, and percent marginal adaptation of Surefil One and Vertise Flow were significantly (p<0.001) inferior to the control group. Dentin preconditioning with universal adhesives significantly increased the study parameter outcomes of Surefil One and Vertise Flow, yet they were still significantly below the performance of the control group. Conclusion: Conventional resin composite outperformed the SAC whether applied solely or in conjunction with their corresponding universal adhesives. [ABSTRACT FROM AUTHOR]

Objectives: To evaluate the effect of treatment using collagen cross-linking agents as primer on resin-dentin bond interfaces subjected to cariogenic oral environment (COE)., Methods: Each of forty human teeth had two cavities (4×4×1.5mm) prepared within enamel margins. These cavities were acid-etched and treated by the primers containing one of the following treatment agents (6.5% proanthocyanidins, 0.1% riboflavin-UVA activated light, 5% glutaraldehyde or distilled water as a control group). After that the cavities were bonded and restored with resin composite. One restoration for each tooth was tested immediately (IM) and another was included in an intra-oral palatal device that was placed in each mouth of ten adult volunteers for 14 days in COE. After 14 days, the teeth were removed and each restoration was sectioned to obtain a slice for Knoop microhardness (KHN) and resin-dentin bonded sticks for microtensile bond strength (μTBS) and nanoleakage (NL) evaluation. Data were evaluated by two-way ANOVA and Tukey's tests (α=0.05)., Results: After 14days in a COE, the KHN was reduced for all groups, except for the glutaraldehyde group; however, the proanthocyanidins group retained the highest KHN in IM and after COE (p<0.05). The μTBS was not reduced after COE for the proanthocyanidins and glutaraldehyde groups, however only the proanthocyanidins treatment did not increase the NL after COE (p>0.05)., Conclusion: The in situ study model seems to be a suitable short-term methodology to investigate the degradation of the bonding interfaces under a more realistic condition. Under COE, the proanthocyanidins and glutaraldehyde treatments produced stable interfaces that are worth further clinical investigation., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Objective: To investigate the effect of collagen cross-links on the stability of adhesive properties, the degree of conversion within the hybrid layer, cytotoxicity and the inhibition potential of the MMPs' activity., Methods: The dentin surfaces of human molars were acid-etched and treated with primers containing: 6.5wt% proanthocyanidin, UVA-activated 0.1wt% riboflavin, 5wt% glutaraldehyde and distilled water for 60s. Following, dentin was bonded with Adper Single Bond Plus and Tetric N-Bond; and restored with resin composite. The samples were sectioned into resin-dentin "sticks" and tested for microtensile bond strength (μTBS) after immediate (IM) and 18-month (18M) periods. Bonded sticks at each period were used to evaluate nanoleakage and the degree of conversion (DC) under micro-Raman spectroscopy. The enzimatic activity (P1L10 cross-linkers, P1L22 MMPs' activities) in the hybrid layer was evaluated under confocal microscopy. The culture cell (NIH 3T3 fibroblast cell line) and MTT assay were performed to transdentinal cytotoxicity evaluation. Data from all tests were submitted to appropriate statistical analysis (α=0.05)., Results: All cross-linking primers reduced the degradation of μTBS compared with the control group after 18M (p>0.05). The DC was not affected (p>0.213). The NL increased after 18M for all experimental groups, except for proanthocyanidin with Single Bond Plus (p>0.05). All of the cross-link agents reduced the MMPs' activity, although this inhibition was more pronounced by PA. The cytotoxicity assay revealed reduced cell viability only for glutaraldehyde (p<0.001)., Significance: Cross-linking primers used in clinically relevant minimized the time degradation of the μTBS without jeopardizing the adhesive polymerization, as well as reduced the collagenolytic activity of MMPs. Glutaraldeyde reduced cell viability significantly and should be avoided for clinical use., (Copyright © 2016 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Objectives: This study evaluated the effect of etching using 2% proanthocynidin-containing 10% phosphoric acid 2% PA/10% PhA vs. 35% phosphoric acid 35% PhA on immediate (IM) and 6-months (6M) resin-enamel microshear bond strength (μSBS), resin-dentin microtensile bond strength (μTBS), nanoleakage (NL) and as well as in situ MMP inhibition potential., Methods: The dentin surface of human were exposed and then etched using 35% phosphoric acid for 15s or 2% PA/10% phosphoric acid for 30s. After rinsing with water, the dentin was bonded with Single Bond Plus (3M ESPE) and composite build-ups were constructed, followed by polymerization. The teeth were sectioned and the bonds were testing for microtensile bond strength (μTBS) and by SEM for NL analysis at IM and 6M. For MMP activity, resin-dentin slices were prepared for in situ zymography, and analyzed under confocal microscopy. For μSBS, others teeth had flattened enamel surfaces etched according the experimental groups and prepared to microshear procedure. The specimens were tested IM and after 6M by microshear bond strength. The data were submitted to two-way repeated measures ANOVA and Tukey's test (α=0.05)., Results: Acid-etching using the 2% PA/10% phosphoric acid did not lower the μTBS in IM (p>0.05) compared to the control 35% phosphoric acid group. However, after 6M, only the 2% PA/10% PhA etched dentin had remained stable the resin-dentin bond strength (p<0.05). Bonds made with 35% PhA showed significant increase in NL% after 6M (p<0.05). Dentin bonds made with 2% PA/10% phosphoric acid showed no increase in NL% after 6 months. The MMP activity within the resin-dentin interface was almost completely reduced after 2% PA/10% PhA etching, while the 35% PhA exhibited intense MMP activity. For μSBS, the type of etchant and the storage period did not affect the resin-enamel bond strengths (p>0.05)., Significance: Ten percent phosphoric acid containing 2% PA can produce stable resin-dentin and enamel-resin interfaces, without requiring additional steps in the bonding procedure. Future studies for longer evaluation time are required., (Copyright © 2016. Published by Elsevier Ltd.)

Purpose: To evaluate the effect of dentin treatment using HEMA phosphate (HEMA-P) on the microtensile bond strength (μTBS) and nanoleakage of an etch-and-rinse adhesive system., Materials and Methods: The occlusal surfaces of human molars were wet ground until superficial dentin was exposed. The specimens were then assigned to two groups according to dentin treatment: PA: 37% H₃PO₄ for 15 s; or HP: HEMA-P for 15 s. Adper Single Bond 2 was applied to the treated dentin surfaces and resin composite buildups were incrementally constructed over them. After 24-h storage in artificial saliva at 37°C, the bonded teeth were cut into resin-dentin sticks with a cross-sectional area of 1 mm², which were submitted to μTBS testing immediately or after 3 months of storage in artificial saliva at 37°C. Nanoleakage was assessed using SEM/EDS, and the interaction between dentin and H₃PO₄ or HEMA-P was evaluated by combining micro-Raman and FT-IR spectroscopy. The data were analyzed using two-way ANOVA and Tukey's HSD post-hoc test (α = 0.05)., Results: HP presented significantly higher μTBS than PA at both times (p < 0.05). Both treatments maintained μTBS stability after 3 months of artificial saliva storage (p > 0.005). At both times, PA presented higher nanoleakage than HP (p < 0.05)., Conclusions: Both dentin treatments maintained μTBS stability after 3 months of artificial saliva storage. The use of HEMA-P was associated with less nanoleakage than was traditional phosphoric-acid etching.

Purpose: To evaluate the effect of an acid containing 2% chlorhexidine (Ac/CHX) or a 2% CHX aqueous solution (Aq/CHX) on the immediate and 5-year bonding properties of resin/dentin interfaces produced by two adhesives. The presence of CHX in these interfaces was also evaluated under micro-Raman spectroscopy., Materials and Methods: Forty-two molars were ground to expose a flat dentin surface. In the control group, the surfaces were etched with conventional phosphoric acid, and Prime&Bond NT (PB) and Adper Single Bond 2 (SB) were applied. In Ac/CHX, an acid containing 2% CHX was applied after adhesive application. In the Aq/CHX group, an aqueous solution of 2% CHX was applied for 60 s after etching. After placing the restoration, specimens were prepared and tested using the microtensile bond strength test (μTBS, 0.5 mm/min) immediately or after 5 years. For nanoleakage (NL), specimens at each period were immersed in silver nitrate solution and examined by EDX-SEM. In addition, specimens at each period underwent examination for CHX using micro-Raman spectroscopy. Data were submitted to appropriate statistical analysis (a=0.05)., Results: After 5 years, NL was more pronounced in the control than in the Ac/CHX or Aq/CHX (p<0.001). Significant reductions in the μTBS were observed for all groups; however, they were more pronounced for the control (p<0.001). CHX was still present in the hybrid layers Ac/CHX or Aq/CHX groups after 5 years., Conclusion: The use of a 2% chlorhexidine-containing acid or the application of an aqueous CHX primer may increase the long-term stability of resin/dentin interfaces.

Purpose: To evaluate the microshear bond strength (μSBS) of several universal adhesive systems applied on five different indirect restorative materials., Materials and Methods: Five CAD/CAM materials were selected: 1) indirect resin composite (LAV); 2) feldspathic glass ceramic (VTR); 3) leucite-reinforced glass-ceramic (EMP); 4) lithium disilicate ceramic (EMX); 5) yttrium-stabilized zirconium dioxide (CZI). For each material, 15 blocks were cut into 4 rectangular sections (6 × 6 × 6 mm) (n = 60 per group), and processed as recommended by the respective manufacturer. For each indirect material, the following adhesive systems were applied according to the respective manufacturer's instructions: 1) AdheSE Universal [ADU]; 2) All-Bond Universal (ABU); 3) Ambar Universal (AMB); 4) Clearfil Universal (CFU); 5) Futurabond U (FBU); 6) One Coat 7 Universal (OCU); 7) Peak Universal Bond (PUB); 8) Prime&Bond Elect (PBE); 9) Scotchbond Universal Adhesive (SBU); 10) Xeno Select (XEN, negative control). After the application of the adhesive system, cylinder-shaped transparent matrices were filled with a dual-curing resin cement (NX3) and light cured. Specimens were stored in water (37°C for 24 h) and tested in shear mode at 1.0 mm/min (mSBS). The failure pattern and μSBS were statistically evaluated (a = 0.05)., Results: LAV, VTR, and EMP showed a greater number of cohesive fractures than EMX and CZI (p < 0.0001). PUB was the only adhesive for which the mean μSBS reached the highest ranking of statistical significance for all five substrates. When each adhesive was compared across the five substrates, 8 out of 10 (ADU, ABU, AMB, CFU, OCU, PUB, PBE, and SBU) reached the statistically highest mean μSBS when applied on CZI., Conclusion: The specific chemical composition of universal adhesives was not the decisive factor in the bond strength values measured for different CAD/CAM indirect materials. There was a wide variability in mean μSBS when different universal adhesives were applied to the several CAD/CAM indirect materials. Most universal adhesives bonded well to air-abraded zirconia.

Objectives: To evaluate the effects of Nd:YAG laser irradiation on the microstructures of dentin surfaces and the long-term bond strength of dentin under simulated pulpal pressure., Materials and Methods: Under simulated pulp pressure, 30 freshly extracted caries-free third molars were cut into 2-mm-thick dentin samples and then divided into five groups: the control and laser groups (93.3 J/cm 2 ; 124.4 J/cm 2 ; 155.5 J/cm 2 ; 186.6 J/cm 2 ). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and Vickers hardness were used to analyze the surface morphology, composition, and mechanical properties of the dentin before and after laser irradiation. Another 80 caries-free third molars were removed and treated as described above, and the resin was bonded to the dentin surface with Single Bond Universal (SBU) adhesive in self-etch mode to make stick specimens. Microtensile bond strength (µTBS), confocal laser scanning microscopy (CLSM), and interfacial silver nanoleakage tests before and after 10,000 times thermocycling were then performed to analyze the bonding properties and interfacial durability of each group., Results: SEM observations revealed that the surfaces of all laser group specimens were rough with open dentin tubules. Laser irradiation altered the surface composition of dentin while removing some collagen fibers but did not affect its surface hardness or crystallographic characteristics. Furthermore, laser irradiation with an energy density of 124.4 J/cm 2 significantly promoted the immediate and aging bond strengths and reduced nanoleakage compared to those of the control group., Conclusions: Under simulated pulp pressure, Nd:YAG laser pretreatment altered the chemical composition of dentin and improved the immediate and long-term bond strength., Clinical Relevance: This study investigated the optimal parameters for Nd:YAG laser pretreatment of dentin, which has potential as a clinical method to strengthen bonding., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objectives: This study aims to assess hydrogen peroxide (HP) penetration within the pulp chamber, color change (CC), physical-chemical properties, and temperature using in-office different concentration bleaching gels with or without violet light., Materials and Methods: Fifty teeth were divided into five groups (n = 10) based on the HP concentration bleaching gels used (6% and 35%) and the used violet light (with or without). HP penetration within the pulp chamber was measured using UV-Vis. The CC was evaluated with a digital spectrophotometer. Initial and final concentration, and pH were measured through titration, and a Digital pHmeter, respectively. Temperature analyses were measured through a thermocouple. Statistical analysis included two-way ANOVA, Tukey's, and Dunnett's test (α = 0.05)., Results: The presence of violet light did not affect the amount of HP within the pulp chamber, or the CC (p > 0.05). Greater penetration of HP was observed within the pulp chamber, as well as CC when using 35% HP (p < 0.05). The final concentration of both gels was lower than the initial concentration, regardless of the use of violet light (p < 0.05). The initial and final pH levels remained neutral and stable (p > 0.05). The pulp temperature increased when the gels were used in conjunction with violet light (p < 0.05)., Conclusions: Using violet light in conjunction with 6% or 35% HP does not alter the physical properties of the bleaching agents, the penetration of HP or enhance color change. However, an increase in temperature was observed when violet light was applied associated with bleaching gels., Clinical Relevance: While the simultaneous use of violet light with hydrogen peroxide 6% or 35% does not alter the material's properties, it also does not bring benefits in reducing hydrogen peroxide penetration and improving color change. Furthermore, the use of violet light increases pulp temperature., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Statement of the Problem: It is still debatable which technique should be used with universal adhesives, either etch-and-rinse (wet or dry) or self-etch strategy (with or without selective enamel etching)., Purpose of the Study: To evaluate the 36-month clinical performance of Scotchbond Universal Adhesive (SU, 3M ESPE) in non-carious cervical lesions (NCCLs) using two evaluation criteria., Methods/materials: Thirty-nine patients participated in this study. Two-hundred restorations were assigned to four groups: ERm: etch-and-rinse+moist dentin; ERd: etch-and-rinse+dry dentin; Set: selective enamel etching; and SE: self-etch. The same composite resin was inserted for all restorations in up to 3 increments. The restorations were evaluated at baseline and at 6-, 18-, and 36-months using both the FDI and the USPHS criteria. Statistical analyses were performed with Friedman repeated measures ANOVA by rank and McNemar test for significance in each pair (α=0.05)., Results: Eight restorations (ERm: 1; ERd: 1; Set: 1 and SE: 5) were lost after 36 months, but only significant for SE when compared with baseline (p=0.02 for either criteria). Marginal staining occurred in 6.8% of the restorations (groups ERm, ERd, and Set) and 17.5% of the restorations (group SE), with significant difference for each group when compared with baseline using the FDI criteria (p<0.04), while statistical significance was reached only for SE when compared with baseline using the USPHS criteria (p<0.03). Twenty-eight and 49 restorations were scored as bravo for marginal adaptation using the USPHS and FDI criteria, respectively, with significant difference for each group when compared with baseline (p<0.05)., Conclusions: While there was no statistical difference among bonding strategies when a universal adhesive was used, there were signs of degradation when the universal adhesive was applied in SE mode. The FDI criteria remain more sensitive than the USPHS criteria, especially for the criteria marginal staining and marginal adaptation., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Objectives: To evaluate the effect of adhesion strategy on the enamel microshear bond strengths (μSBS), etching pattern, and in situ degree of conversion (DC) of seven universal adhesives., Methods: 84 extracted third molars were sectioned in four parts (buccal, lingual, proximal) and divided into 21 groups, according to the combination of the main factors adhesive (AdheSE Universal [ADU], All-Bond Universal [ABU], Clearfil Universal [CFU], Futurabond U [FBU], G-Bond Plus [GBP], Prime&Bond Elect (PBE), and Scotchbond Universal Adhesive [SBU]), and adhesion strategy (etch-and-rinse, active self-etch, and passive self-etch). Specimens were stored in water (37°C/24h) and tested at 1.0mm/min (μSBS). Enamel-resin interfaces were evaluated for DC using micro-Raman spectroscopy. The enamel-etching pattern was evaluated under a field-emission scanning electron microscope (direct and replica techniques). Data were analyzed with two-way ANOVA and Tukey's test (α=0.05)., Results: Active self-etch application increased μSBS and DC for five out of the seven universal adhesives when compared to passive application (p<0.001). A deeper enamel-etching pattern was observed for all universal adhesives in the etch-and-rinse strategy. A slight improvement in etching ability was observed in active self-etch application compared to that of passive self-etch application. Replicas of GBP and PBE applied in active self-etch mode displayed morphological features compatible with water droplets. The DC of GBP and PBE were not affected by the application/strategy mode., Conclusions: In light of the improved performance of universal adhesives when applied actively in SE mode, selective enamel etching with phosphoric acid may not be crucial for their adhesion to enamel., Clinical Significance: The active application of universal adhesives in self-etch mode may be a practical alternative to enamel etching in specific clinical situations., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Objective: To compare the 18-month retention rates of composite restorations in non-carious cervical lesions [NCCLs] bonded with a self-etch adhesive with and without preliminary conditioning with EDTA., Methods: Forty-eight patients with two similar-sized NCCL were selected and randomly allocated to one of two groups. Two calibrated operators placed 96 restorations with a one-step self-etch adhesive (Adper Easy One, 3M ESPE). Half of the restorations were placed according to the manufacturer's instructions while, for the other half, the surfaces of the lesions were conditioned with 17% EDTA for 2 min prior to adhesive application. Two blinded and independent examiners evaluated the restorations at baseline, 6, 12, and 18 months, according to the FDI criteria. The comparison between groups in each period was conducted with the Fisher's exact test, and the performance of each group at the different periods was evaluated by McNemar's test (α=0.05)., Results: After 18 months, significantly higher retention rates (95% CI) were observed for the EDTA group (95.5 [84.9-98.7]) than the control group (79.6% [65.5-88.9]) (p=0.02). Significant deterioration of the marginal adaptation and marginal discoloration were observed for both groups over the 18-month evaluation., Conclusions: The preliminary conditioning with EDTA before application of a one-step self-etch adhesive significantly improved the retention rates of composite restorations in cervical lesions., Clinical Significance: Conditioning with EDTA is an alternative that improves the 18-month retention rate of cervical restorations bonded with a self-etch adhesive., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Unlabelled: The aim of this study was to evaluate the effect of low shrinkage monomers on physicochemical properties of dental resin composites. Two low shrinkage resin composites: one with a crosslink branching monomer (Kalore, GC Corp) and a novel monomer (Venus Diamond, Heraeus Kulzer) were compared to a conventional resin composite formulation (Filtek Z250, 3M/ESPE). The volumetric shrinkage was evaluated by µCT analysis (n=5) and the physicochemical properties by degree of C=C conversion (DC), flexural strength (FS) and Young's modulus (YM) (n=10). All samples were light cured by a LED device (Radii, SDI) with 16 J/cm2. The results were analysed by one-way ANOVA and Tukey test for multiple comparisons (α=0.05). No statistical difference was found between µCT shrinkage values to Kalore (1.8%) and Venus Diamond (1.7%) (p≥0.05); Z250 presented statistical highest shrinkage value (2.0%). Kalore presented higher statistical DC (60.8%) than Venus Diamond (49.5%) and Z250 (49.6%). No statistical difference was found between FS or YM properties to Venus Diamond and Z250; Kalore presented statistical lowest FS and YM properties (p≥0.05)., Conclusion: Using novel monomers seem to reduce polymerization shrinkage without affecting the physicochemical properties evaluated of resin composites rather than using crosslink branching monomers.

Purpose: To evaluate the effect of different radiant exposure values delivered to two simplified etch-and-rinse adhesive systems on push-out bond strength (PBS) of fiber posts to root canal, as well as nanoleakage (NL) and in situ degree of conversion (DC) within the hybrid layer., Materials and Methods: The roots of human premolars were endodontically prepared and divided into 6 groups according to the combination of the main factors adhesive/resin cement (2 commercial brands) and radiant exposure (4, 16, 48, and 288 J/cm2). The posts were cemented and the PBS tested at 0.5 mm/min (n = 7). The NL (n = 3) was evaluated using SEM after immersion of specimens in 50% silver nitrate. Micro-Raman spectroscopy was performed to determine the in situ DC (n = 2). Data were analyzed by three-way repeated measures ANOVA and Tukey's post-hoc test (5%)., Results: PBS (MPa) showed a significant difference only for the middle third when an increase in radiant exposure from 4 to 16 J/cm2 or higher was used (p < 0.05). The NL (%) decreased significantly with increasing radiant exposure from 48 to 288 J/cm2 in the middle and apical thirds when compared to lower radiant exposure (p < 0.05). The radiant exposure of 288 J/cm2 significantly increased the DC (%) in the middle and apical thirds, compared the other radiant exposure values (p < 0.05)., Conclusion: The increase in radiant exposure delivered to the cervical third of root canals during post cementation improved the adhesive performance of simplified etch-and-rinse adhesive systems in the apical and middle thirds.

Background: Obtaining a perfect color match with resin composite presents a significant challenge. The chameleon effect has enabled resin composite to mimic the color of the adjacent tooth structure in vitro. This double-blind, split-mouth and equivalent randomized clinical trial evaluated the color matching of one-shade resin composite with chameleon effect versus multi-shade resin composite in non-carious cervical lesion restorations (NCCLs). Methods: One hundred twenty restorations were performed on NCCLs with two restorative materials (n = 60). After prophylaxis, the teeth were isolated with rubber dam and one universal adhesive was applied in the selective enamel etching strategy. For both groups, the restorations were inserted incrementally. The values of ΔEab and ΔE00 in the cervical and middle third were evaluated using a digital spectrophotometer before vs. after the restorations. The restorations were evaluated at baseline and after 7 days, 6-, 12- and 18-month of clinical performance according to the FDI criteria (Word Federation Criteria). Statistical analysis was performed using Chi-square test for all parameters. Color change was analyzed by two one-sided t-tests for paired samples (α = 0.05). Results: Regarding the color measurement no significant difference was observed when Vittra APS (FGM Dental Products, Joinville, SC, Brazil) was compared to Vittra Unique (FGM Dental Products, Joinville, SC, Brazil) for any of the comparisons performed (p > 0.05). However, the ΔEab and ΔE00 values for the cervical third, both before and after the restorations, were higher compared to the ΔEab and ΔE00 values observed when comparing the cervical and middle thirds after the restorations. After 18 months, five restorations exhibited minimal discrepancies in terms of marginal adaptation or marginal discoloration (p > 0.05). In all other criteria, including retention rate, no changes were detected at the 18-month recall. Conclusions: The one-shade resin composite used achieve the same color match when compared to a multi-shade resin composite after a period of 7 days in NCCLs. Overall, the restorations scored clinically very good (FDI) at baseline and after 18 months for all outcomes. Clinical Significance: The use of a one-shade resin composite in NCCLs can be recommended because it has the ability to simplify the restoration procedure and maintaining an excellent clinical performance. Registration of clinical trials: RBR-8txr4fw: 26/05/2022. [ABSTRACT FROM AUTHOR]

Statement of the Problem: One of the most important factors in the clinical longevity of composite resin restorations is proper adhesion, which is achieved using phosphoric acid. Different phosphoric acid products might affect the micro-shear bond strength of composite resin to enamel. Purpose: The present study aimed to evaluate the micro-shear bond strength of composite resin to sound enamel using six different brands of acid-etch agents. Materials and Method: The present in vitro study was carried out on 72 extracted sound human (mandibular and maxillary) first premolar teeth. The teeth crowns were divided into two equal parts with a mesiodistal cut and randomly assigned to six groups in terms of the acid etchant brand: Ultra-etch, SDI, Morvabon, FGM, Nik Darman, and Experimental. The bonding procedure was carried out using the Margin Bond enamel adhesive. Tygon tubes (1×0.7 mm) containing composite resin were bonded to each enamel surface. After 24 hours of storage in distilled water, each sample underwent a shearing force with a crosshead speed of 0.5 mm/min. The morphologic changes were evaluated using scanning electron microscopy. The data were analyzed with SPSS using one-way ANOVA and Tukey test (p< 0.05). Results: One-way ANOVA showed that micro-shear bond strength in different etchant agents have significant differences (p< 0.001). The highest and lowest composite resin micro-shear bond strengths belonged to Ultradent and SDI brands, respectively. The enamel surfaces in the SDI group revealed residual debris after dissolution. Conclusion: Preparation of the enamel surface with different phosphoric acid products might affect the micro-shear bond strength and enamel surface morphology differently. Further clinical studies are suggested to evaluate the effect of different types and concentrations of acid etching agents on the enamel and dentin bonds. [ABSTRACT FROM AUTHOR]

Purpose: To determine if there was a statistically significant difference between physician assistant (PA) faculty and nurse practitioner (NP) faculty cultural awareness and sensitivity (CAS) and cultural competence behaviors (CCB). Methods: This quantitative comparative analysis utilized the Cultural Competence Assessment (CCA), to measure participants' cultural competence (CC) subscales of CAS and CCB. PA and NP faculty, broadly defined as any PA or NP licensed to practice within a United States jurisdiction and functioning as full- or part-time faculty, adjunct faculty, guest lecturers, or clinical preceptors, participated online. Descriptive statistics were used to generate a depiction of the sample and central tendencies of the CAS and CCB scores. The data were then analyzed using the independent-samples t-test. Results: PA (n = 100) and NP (n = 102) responses were evaluated. For each of the subscales, NP faculty scored marginally higher than their PA counterparts. However, the differences in CAS (P = 0.463) and CCB (P = 0.353) scores failed to achieve statistical significance. The results uncovered that for both groups, CAS scores were higher than CCB scores. This finding may indicate that attitudes and desires regarding diversity and CC are greater than participants' ability or willingness to manifest CC. Conclusion: While there was not a statistically significant difference in the CC scores between PA and NP faculty, there are theoretical and practical implications for employers, NP and PA faculty, NP and PA program administrators, and accrediting organizations for each profession. [ABSTRACT FROM AUTHOR]

The translation of pre‐clinical anti‐cancer therapies to regulatory approval has been promising, but slower than hoped. While innovative and effective treatments continue to achieve or seek approval, setbacks are often attributed to a lack of efficacy, failure to achieve clinical endpoints, and dose‐limiting toxicities. Successful efforts have been characterized by the development of therapeutics designed to specifically deliver optimal and effective dosing to tumour cells while minimizing off‐target toxicity. Much effort has been devoted to the rational design and application of synthetic nanoparticles to serve as targeted therapeutic delivery vehicles. Several challenges to the successful application of this modality as delivery vehicles include the induction of a protracted immune response that results in their rapid systemic clearance, manufacturing cost, lack of stability, and their biocompatibility. Extracellular vesicles (EVs) are a heterogeneous class of endogenous biologically produced lipid bilayer nanoparticles that mediate intercellular communication by carrying bioactive macromolecules capable of modifying cellular phenotypes to local and distant cells. By genetic, chemical, or metabolic methods, extracellular vesicles (EVs) can be engineered to display targeting moieties on their surface while transporting specific cargo to modulate pathological processes following uptake by target cell populations. This review will survey the types of EVs, their composition and cargoes, strategies employed to increase their targeting, uptake, and cargo release, and their potential as targeted anti‐cancer therapeutic delivery vehicles. [ABSTRACT FROM AUTHOR]

Introduction: Achieving strong bond strength of adhesive systems to deep dentin is challenging. Various methods to improve bond strength to deep dentin have been investigated. Chlorhexidine (CHX) enhances the longevity of the bond between adhesives and dentin by inhibiting the collagenolytic activity of Matrix Metalloproteinases (MMPs). Benincasa hispida is a natural plant-based functional food containing minerals and vitamins that help prevent osteoporosis and improve bone health. Aim: To evaluate the Microshear Bond Strength (MSBS) of a 10-methacryloyloxydecyl-dihydrogen Phosphate-based (10-MDP) universal adhesive system to coronal dentin with different dentin surface pretreatments, specifically CHX and Benincasa hispida. Materials and Methods: An in-vitro pilot study was conducted at the Department of Conservative Dentistry and Endodontics, Vishnu Dental College, Bhimavaram, Andhra Pradesh, India, from May 2023 to November 2023. Dentin discs (42) were prepared from human mandibular first molars. A standard etch-and-rinse protocol was performed on the discs. The specimens were assigned to different dentin pretreatments: Group-I (no pretreatment), Group-II (CHX) and Group-III (Benincasa hispida). CHX and Benincasa hispida were applied using micro applicator tips. A dentin bonding agent containing 10-MDP (DBA) was applied, photopolymerised and a composite restoration was fabricated. The MSBS to dentin was evaluated using a universal testing machine. The failure patterns were analysed using a stereomicroscope at 10x magnification. One-way Analysis of Variance (ANOVA) and Tukey's Honestly Significant Difference (HSD) HSD tests were used for statistical analysis, with a significance level set at α=0.05. Results: The mean MSBS values were 24.2732±5.41329 MPa for Group-III, 14.3848±4.23492 MPa for Group-II and 6.9724±3.15837 MPa for Group-I. Pretreatment of dentin with B. hispida resulted in significantly higher MSBS values compared to the other two groups (p<0.001*). Conclusion: Pretreatment with B. hispida significantly improved MSBS. Thus, B. hispida pretreatment may be beneficial in increasing dentin bond strength. [ABSTRACT FROM AUTHOR]

Aim: To evaluate the effect of applying a matrix metalloproteinase (MMP) inhibitor on the fracture resistance of root-filled teeth restored with Everstick fiber-reinforced composite resin. Subjects and Methods: After the selection of 60 freshly extracted human mandibular first molar, root canal access and standard uniformly sized mesio-occluso-distal (MOD) cavities were made and the teeth were randomly assigned into three groups (n = 20 each): Group I, the MOD cavity was first lined with flowable composite resin and then restored with composite resin. In Group II, Everstick fiber was placed into the bed of flowable composite in buccal–pulpal–lingual direction before the composite restoration was placed. In Group III, after etching of the cavity, a 2% chlorhexidine MMP inhibitor was applied. Then, the MOD cavity was restored same as group II. A universal testing machine was employed to compressively load the teeth at a cross-head speed of 0.5 mm/min till fracture. The maximum fracture loads were recorded in Newtons (N) and data were analyzed with one-way ANOVA and post-hoc Tukey tests. Results: Group III exhibited significantly higher fracture resistance compared to all other groups (P < 0.001), whereas Group I demonstrated the lowest fracture resistance. Conclusion: The utilization of Everstick glass fiber, combined with MMP inhibitor treatment, yielded the greatest fracture resistance. Hence, this method may be prioritized over conventional restoration techniques for strengthening root canal-treated teeth with structurally compromised crowns. [ABSTRACT FROM AUTHOR]

Objective: The objective of this study was to evaluate the effect of different surface treatment methods on the shear bond strength (SBS) of metal brackets bonded to two types of CAD/CAM composite restorations: milled and 3D-printed. Materials and Methods: A total of 160 flat-shaped specimens (10 × 10 × 2 mm3) were prepared from four different CAD/CAM composites; two milled (Lava Ultimate™ [LU] and Grandio™ [GR]) and two 3D-printed (Crowntec™ [CT] and C&B Permanent™ [CB]). These specimens underwent thermocycling (5000 cycles at 5–55 °C), then were categorized based on the surface treatment into four groups (n = 10): Group C (control, no surface treatment), Group HF (treated with 9.6% hydrofluoric acid), Group DB (mechanical roughening by a diamond bur), and Group SB (sandblasting using aluminum oxide). Metal brackets were bonded using Transbond XT Primer and universal adhesive, stored in artificial saliva for 24 h, then thermocycled again. Shear bond strength (SBS) was tested using a universal testing machine until bracket debonding occurred. The adhesive remnant index (ARI) was assessed using a stereomicroscope to quantify the residual adhesive following debonding. Result: Regarding material, GR and LU restorations had significantly higher SBS values compared to CT and CB, ranging from 13.90 MPa to 20.35 MPa. Regarding surface treatment, SB and HF groups showed significantly higher SBS values. The ARI scores showed different adhesive modes of failure, with higher instances of scores 0 and 1, which indicate no or minimal adhesive remaining. Conclusions: Both milled and 3D-printed materials had adequate SBS for clinical use, with milled materials showing superior results. Surface treatments like sandblasting and HF significantly improved bond strength, with adhesive failure being common. [ABSTRACT FROM AUTHOR]

The aim of this study is to present the characteristics and a comparison of four different commercial materials dedicated to the CAD/CAM technique in dentistry, all of which can be classified as ceramic materials. Its purpose is also to evaluate the impact of surface treatment on the cytotoxicity and microbiological properties of the materials. The CAD/CAM technique has a perpetually growing role in modern reconstructive dentistry. It requires a material's possession of peculiar characteristics, such as mechanical resistance, durability, functionality (similar to natural tissues), good aesthetics and biocompatibility. To critically evaluate a biomaterial, both manufacturer claims and in vitro tests should be considered. Further steps of evaluation may include animal tests and clinical trials. There are certain attributes of biomaterials that may be modified by surface treatment that can be crucial to the clinical success of the material. The evaluated materials were Vita Suprinity (VITA-Zahnfabrik, Germany), Vita Mark II (VITA-Zahnfabrik, Germany), Celtra Duo (Dentsply Sirona, USA) and Empress Cad (Ivoclar Vivadent, Liechtenstein). They are available in the form of prefabricated blocks of various diameters and are popular among operators performing clinical procedures using CAD/CAM. Standardized blocks of each material were prepared. Half of them had their surface polished. Further, half of all the samples were covered by a nano-copper layer. The samples were evaluated for cytotoxicity, presented on a 0–4 scale, adhesion susceptibility and potential of forming a biofilm on their surface. Physicochemical properties such as the water contact angle (WCA) were evaluated for the tested materials. The influence of copper coating on cytotoxicity cannot be unequivocally stated or denied. Surface polishing did not affect the materials' cytotoxicity, but it increased the WCA of all materials and, therefore, their hydrophobicity. Different degrees of adhesion ability and biofilm formation were dependent on the species of microorganisms and properties of the dental materials. [ABSTRACT FROM AUTHOR]

Copyright of GeSec: Revista de Gestao e Secretariado is the property of Sindicato das Secretarias e Secretarios do Estado de Sao Paulo (SINSESP) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: This study aims to evaluate the microtensile bond strength (µTBS) of different resin composite restorations bonded to mid-coronal dentin and proximal root dentin using light-cured, chemical-cured, and dual-cured adhesives immediately and after aging. Nanoleakage and degree of cure were also assessed. Methods: Eighty-four molars were divided into mid-coronal dentin and proximal root dentin. Each group was further subdivided into three subgroups based on the restorative systems used, which involved the utilization of light-cured, chemical-cured, and dual-cured adhesives. Half of the specimens underwent µTBS testing after 24 h, while the other half after aging. Representative specimens were analyzed for nanoleakage. The degree of cure of the tested adhesive systems was also assessed. Results: Aging showed a significant negative effect on µTBS results and led to increased nanoleakage (p < 0.001). Furthermore, in all subgroups, the µTBS values of proximal root dentin were lower compared to mid-coronal dentin, except in the aged subgroup for the system utilizing the dual-cured adhesive. The restorative systems with chemical and dual-cured adhesives demonstrated comparable bonding properties. However, the system with the light-cured adhesive exhibited the worst bonding properties after aging when bonded to proximal root dentin and cured at a large distance (p < 0.05). Conclusions: All tested restorative systems were negatively affected by aging, and the regional dentin had variable effects on the bonding properties. Clinicians should exercise caution when using the tested light-cured adhesive in areas where the curing distance exceeds 3 mm. [ABSTRACT FROM AUTHOR]

This article comprehensively reviews the performance of simplified direct restorative materials that have the potential to be an alternative to amalgam. Following an understanding of the material structures and clinical performances, this review provides an analysis of the bonding mechanisms and influential factors on the bond strength. These factors include substrate-related variations, involving primary vs. permanent dentin, sound- vs. caries-affected/demineralized dentin comparisons and surface-related factors and pretreatments. Special attention is given to the factors changing the substrate surface, such as different contaminants, remedy methods after contamination and different conditioning methods related to the materials. Variations in sample preparation and bond strength test parameters are also evaluated for the analysis of the outcomes. This review aims to provide an overview of the factors involved in the application procedure of direct restorations together with in vitro testing variations to guide the selection of suitable materials by understanding strengths and shortcomings. [ABSTRACT FROM AUTHOR]

We study a discrete-time interacting particle system with continuous state space, which is motivated by a mathematical model for turnover through branching in actin filament networks. It gives rise to transient clusters reminiscent of actin filament assemblies in the cortex of living cells. We reformulate the process in terms of the inter-particle distances and characterize their marginal and joint distributions. We construct a recurrence relation for the associated characteristic functions and pass to the large population limit, reminiscent of the Fleming-Viot super processes. The precise characterization of all marginal distributions established in this work opens the way to a detailed analysis of cluster dynamics. We also obtain a recurrence relation that enables us to compute the moments of the asymptotic single particle distribution characterizing the transient aggregates. Our results indicate that aggregates have a fat-tailed distribution. [ABSTRACT FROM AUTHOR]

Background: In Denmark, the first standalone supervised injecting facility (SIF) opened in Copenhagen's Vesterbro neighborhood on October 1, 2012. The purpose of this study was to assess whether use of services provided by the recently opened SIF was associated with changes in injecting behavior and syringe disposal practices among people who inject drugs (PWID). We hypothesized that risk behaviors (e.g., syringe sharing), and unsafe syringe disposal (e.g., dropping used equipment on the ground) had decreased among PWID utilizing the SIF., Methods: Between February and August of 2013, we conducted interviews using a survey (in English and Danish) with forty-one people who reported injecting drugs at the SIF. We used descriptive statistics and McNemar's test to examine sociodemographic characteristics of the sample, current drugs used, sites of syringe disposal before and after opening of the SIF, and perceived behavior change since using the SIF., Results: Of the interviewed participants, 90.2% were male and the majority were younger than 40 years old (60.9%). Three-quarters (75.6%) of participants reported reductions in injection risk behaviors since the opening of the SIF, such as injecting in a less rushed manner (63.4%), fewer outdoor injections (56.1%), no longer syringe sharing (53.7%), and cleaning injecting site(s) more often (43.9%). Approximately two-thirds (65.9%) of participants did not feel that their frequency of injecting had changed; five participants (12.2%) reported a decrease in injecting frequency, and only two participants (4.9%) reported an increase in injecting frequency. Twenty-four (58.5%) individuals reported changing their syringe disposal practices since the opening of the SIF; of those, twenty-three (95.8%) reported changing from not always disposing safely to always disposing safely (McNemar's test p-value < 0.001)., Conclusions: Our findings suggest that use of the Copenhagen SIF is associated with adoption of safer behaviors that reduce harm and promote health among PWID, as well as practices that benefit the Vesterbro neighborhood (i.e., safer syringe disposal). As a public health intervention, Copenhagen's SIF has successfully reached PWID engaging in risk behavior. To fully characterize the impacts of this and other Danish SIFs, further research should replicate this study with a larger sample size and prospective follow-up.

Introduction: Luting posts inside the root canal is still a challenge because of the difficulty of bonding adhesive materials in the apical third of roots. This study evaluated the effect of the application mode of 3 simplified etch-and-rinse adhesives on the push-out bond strength (PBS), nanoleakage (NL), and in situ degree of conversion (DC) of fiber posts in the root canal., Methods: The roots of human premolars were endodontically prepared and divided into 6 groups according to the combination of the main factors: adhesive (Ambar, FGM, Joinville, SC, Brazil; Adper Single Bond 2, 3MESPE, St Paul, MN; and XP Bond+self-cure activator, DeTrey Dentsply, Konstanz, Germany) and application mode (manual or sonic). The posts were cemented and the PBS tested at 0.5 mm/min. The NL was evaluated by scanning electron microscopy after the immersion of specimens in 50% silver nitrate. Micro-Raman spectroscopy was used to measure the in situ DC. Root third was also considered in the statistical evaluation. Data were analyzed by 3-way repeated measures analysis of variance and Tukey tests (5%)., Results: Under sonic application, the PBS and the in situ DC increased, whereas NL decreased significantly for all groups in the middle and apical thirds (P < .05)., Conclusions: The application of simplified adhesives by sonic mode in the root canal is a feasible tool to increase the fiber post bond to root canals., (Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

Aim: The purpose of this study was to evaluate the 18-month retrospective study of self-etch adhesive (Prime&Bond One Select) and self-etch mode of universal adhesives (Single Bond Universal, Gluma Bond Universal) applied to non-carious cervical lesions according to the World Dental Federation criteria., Materials and Methods: Thirty patients without any systemic disease, good oral hygiene, having at least 20 teeth and six non-carious cervical lesions treated using a self-etch mode of adhesives operated between January and March 2017. Accordingly, 335 restorations were evaluated according to the World Dental Federation criteria at 3, 6, 12 and 18 months. Pillai's Trace test was used to determine the interaction of criteria with time and adhesive systems. IBM SPSS Statistics 21.0 program was used in the analysis. Value of P < 0.05 was accepted as a criterion for statistical significance., Results: At the end of 18 months, participation was 100%. There was a statistically significant difference P < 0.05 between Prime&Bond One Select and Single Bond Universal, Prime&Bond One Select and Gluma Bond Universal in the 18-month period. In terms of marginal staining, fracture of material and retention, recurrence of caries, erosion and abfraction, tooth integrity criteria at the end of the 18 months, Prime&Bond One Select performed clinically very good, Single Bond Universal and Gluma Bond Universal performed clinically good according to World Dental Federation criteria. Marginal adaptation criteria, Prime&Bond One Select, Single Bond Universal and Gluma Bond Universal performed clinically good. Retention loss rate was found to be the lowest in Prime&Bond One Select and the highest in Gluma Bond Universal., Conclusion: Accordingly, 18-month evaluation of all adhesives used in the study showed clinically acceptable results in all of the World Dental Federation criteria., (© 2023 Australian Dental Association.)

Purpose: To evaluate different protocols for recementation of dislodged glass fiber posts (GFPs).Materials and Methods: The root canals of 50 bovine incisors were prepared to receive GFPs, which were conditioned with 24% hydrogen peroxide, silanized, and cemented with a self-adhesive resin cement. After light curing, the specimens were submitted to a pullout test. The dislodged GPFs were distributed into five experimental groups (n = 10 each) according to surface treatment for recementation: NT = no treatment; SI = silane; ET = 92.8% ethanol/silane; HP = 24% hydrogen peroxide/silane; AL = airborne-particle abrasion (50-μm alumina)/silane. The GFPs were recemented with the same self-adhesive resin cement, and specimens were submitted to a second pullout test. Data were analyzed by Student t test and one-way ANOVA (α = .05).Results: For all groups, the recementation bond strength was higher than the strength obtained after the first cementation (P < .05). There were no statistical differences among the experimental recementation protocols (P = .096).Conclusion: All recementation protocols might be reliably applied since they led to higher bond strength than the first cementation. [ABSTRACT FROM AUTHOR]

Objectives: The aim of this study was to correlate the degree of conversion measured inside the hybrid layer (DC) with the microtensile resin-dentin bond strength (μTBS) and silver nitrate uptake or nanoleakage (SNU) for five simplified etch-and-rinse adhesive systems., Methods: Fifty-five caries free extracted molars were used in this study. Thirty teeth were used for μTBS/SNU [n=6] and 25 teeth for DC [n=5]. The dentin surfaces were bonded with the following adhesives: Adper Single Bond 2 (SB), Ambar (AB), XP Bond (XP), Tetric N-Bond (TE) and Stae (ST) followed by composite resin build-ups. For μTBS and SNU test, bonded teeth were sectioned in order to obtain stick-shaped specimens (0.8mm(2)), which were tested under tensile stress (0.5mm/min). Three bonded sticks, from each tooth, were not tested in tensile stress and they were immersed in 50% silver nitrate, photo-developed and analyzed by scanning electron microscopy. Longitudinal 1-mm thick sections were prepared for the teeth assigned for DC measurement and evaluated by micro-Raman spectroscopy., Results: ST showed lowest DC, μTBS, and higher SNU (p<0.05). All other adhesives showed similar DC, μTBS, and SNU (p>0.05), except for TE which showed an intermediate SNU level. The DC was positively correlated with μTBS and negatively correlated with SNU (p<0.05). SNU was also negatively correlated with μTBS (p<0.05)., Significance: The measurement of DC inside the hybrid layer can provide some information about bonding performance of adhesive systems since this property showed a good correlation with resin-dentin bond strength and SNU values., (Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Objectives: To evaluate the dentine microtensile bond strength (μTBS), nanoleakage (NL), degree of conversion (DC) within the hybrid layer for etch-and-rinse and self-etch strategies of universal simplified adhesive systems., Methods: forty caries free extracted third molars were divided into 8 groups for μTBS (n=5), according to the adhesive and etching strategy: Clearfil SE Bond [CSE] and Adper Single Bond 2 [SB], as controls; Peak Universal Adhesive System, self-etch [PkSe] and etch-and-rinse [PkEr]; Scotchbond Universal Adhesive, self-etch [ScSe] and etch-and-rinse [ScEr]; All Bond Universal, self-etch [AlSe] and etch-and-rinse [AlEr]. After restorations were constructed, specimens were stored in water (37°C/24h) and then resin-dentine sticks were prepared (0.8mm(2)). The sticks were tested under tension at 0.5mm/min. Some sticks from each tooth group were used for DC determination by micro-Raman spectroscopy or nanoleakage evaluation (NL). The pH for each solution was evaluated using a pH metre. Data were analyzed with one-way ANOVA and Tukey's test (α=0.05)., Results: For μTBS, only PkSe and PkEr were similar to the respective control groups (p>0.05). AlSe showed the lowest μTBS mean (p<0.05). For NL, ScEr, ScSe, AlSe, and AlEr showed the lowest NL similar to control groups (p<0.05). For DC, only ScSe showed lower DC than the other materials (p<0.05)., Conclusions: Performance of universal adhesives was shown to be material-dependent. The results indicate that this new category of universal adhesives used on dentine as either etch-and-rinse or self-etch strategies were inferior as regards at least one of the properties evaluated (μTBS, NL and DC) in comparison with the control adhesives (CSE for self-etch and SB for etch-and-rinse)., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Objectives: To evaluate the effect of prolonged exposure times on immediate and 6-month adhesive properties: degree of conversion (DC), nanoleakage (NL) and resin-dentine bond strength (μTBS) of three one-step self-etch adhesive systems (Adper Easy One [EO], Clearfil S(3) Bond [CS3] and Go [GO])., Material and Methods: The adhesives were applied on exposed dentine surfaces of 90 human molars according to manufacturers' instructions and light polymerized for 10, 20, and 40 s at 600 mW/cm(2). Bonded teeth were sectioned to obtain stick-shaped specimens (0.8 mm(2)) and tested under tensile stress (0.5 mm/min) immediately (IM) or after 6 months of water storage. Two bonded sticks from each tooth at each storage time interval were analysed by SEM for NL evaluation. The in situ DC was evaluated by micro-Raman spectroscopy. Data were analysed by appropriate ANOVA and Tukey's test (α = 0.05)., Results: Prolonged exposure times significantly increased the DC (%) (10 s [67.4 ± 17.3]; 20 s [85.9 ± 8.9] and 40 s [85.2 ± 9.0]) and decreased the NL (%) (10 s [24.8 ± 13.2]; 20 s [13.3 ± 7.5] and 40 s [13.5 ± 9.3]) for all adhesives; however it did not increase the IM μTBS for two (EO, GO) out of the three adhesives. Furthermore, this technique did not minimize dentine bond degradation., Conclusion: Although longer exposure times than those recommended could not prevent degradation of dentine bonds, they could increase DC within the hybrid layer and reduced NL for all adhesives tested., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Purpose: To evaluate the association between the resin-dentin bond strength (microtensile bond strength, μTBS) and the physical properties (ultimate tensile strength [UTS] and microhardness [VHN]) of the cured adhesive resin using five commercial one-step self-etching systems., Materials and Methods: Futurabond NR, Go, G Bond, 1-step All Bond SE and Clearfil S3 Bond were applied on flat superficial dentin surfaces. Each adhesive system was applied in five teeth. A resin buildup was then made. After 24 h, resin-dentin beams (0.9 mm2) were prepared to be tested immediately at 0.5 mm/min. For the UTS measurement, hourglass specimens were prepared with each adhesive system (n = 5) to be tested under tensile stress at 0.5 mm/min. The fractured specimens from the UTS test were taken to a Vickers microhardness tester (25 gf/20 s). μTBS, UTS, and VHN values were submitted to a one-way ANOVA and Tukey's test (α = 0.05) for pairwise comparisons. Correlations between μTBS, UTS and VHN were analyzed using the Pearson product moment correlation test (α = 0.05)., Results: Significantly higher μTBS values were observed for 1-step All Bond SE and Clearfil S3 Bond (p > 0.05). The adhesive All Bond SE showed the highest UTSmean among all systems (p < 0.05). The adhesives All Bond SE and G-Bond showed the highest microhardness mean among all systems (p < 0.05). A strong (r = 0.93) and significant (p = 0.021) correlation was only found between the μTBS and UTS values., Conclusion: The ultimate tensile strength of one-step self-etching systems correlates with the resin-dentin bond strength values.

This study aimed to assess the efficacy of phototherapy with an Er, Cr:YSGG laser on the bond strength of dentin using two different adhesive systems after chlorhexidine (CHX) application. Twenty-four non-carious human molar teeth were separated into three main groups: negative control Group A (Group A), CHX and phototherapy with an Er, Cr:YSGG laser (Group PC), and CHX with conventional diamond bur (no phototherapy) (Group C). These groups were divided into two subgroups based on adhesives: Clearfil Universal Quick Bond and Clearfil SE Bond. To evaluate the microtensile bond strength, the occlusal enamel surfaces of the teeth were removed with a low-speed, water-cooled diamond bur to expose hard dentin tissue. The teeth within Group PC were treated with Er, Cr:YSGG phototherapy. The surfaces were then disinfected with 0.2% chlorhexidine gluconate. Subgroups were applied according to the manufacturer's instructions using the adhesive systems mentioned above. Following adhesive application, the teeth were restored with composite resin. A microtensile bond strength test was performed on the test sticks obtained from the teeth using a universal test device. Data were analyzed using variance analysis (ANOVA) at a significance level of p < 0.05. Among all groups, the highest bond strength was achieved with Clearfil SE Bond with CHX + phototherapy (45.6 ± 4.2), while the lowest was achieved with Clearfil Universal Quick Bond without phototherapy (control group) (27.0 ± 6.7) (p < 0.05). Phototherapy with Er, Cr: YSGG following chlorhexidine application enhanced the bond strength of both the bond systems (p < 0.05)., (© 2023. The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.)

Objective: This study aims to evaluate the effects of exposure time and irradiance on the dentin bonding properties (microtensile bond strength (μTBS) and nanoleakage (NL)) of the Clearfil Universal Bond Quick (CUQ) adhesive and Scotchbond Universal Adhesive (SBU) immediately and after 2 years of water storage., Material and Methods: Hence, 128 human molars were randomly assigned to 16 groups based on adhesive strategy, irradiance/exposure times, and storage time for each universal adhesive tested. The adhesives were applied using the etch-and-rinse and self-etch strategies and were light-cured using four different irradiance/exposure times: 1400 mW/cm 2 for 5 s (1400 × 5), 1400 mW/cm 2 for 10 s (1400 × 10), 3200 mW/cm 2 for 5 s (3200 × 5), and 3200 mW/cm 2 for 10 s (3200 × 10). Then, each sample was restored and sectioned into a resin-dentin bonded stick to be tested for μTBS and NL (immediately and after 2 years of water storage). The mean μTBS and NL of all resin-dentin bonded sticks from the same hemi-tooth (factor time) were statistically analyzed using a three-way ANOVA and Tukey's test (a = 0.05)., Results: Despite a significant decrease in the μTBS values for all groups after 2 years of water storage, the 3200 × 5 group showed higher μTBS values, whereas the 3200 × 10 group showed lower μTBS values for both universal adhesives tested. Although a significant increase in the NL values was observed for all groups after 2 years of water storage, the 3200 × 10 group showed higher NL values than the other groups (p < 0.001)., Conclusion: Results indicate that light-curing the adhesive layer with 14-16 J/cm 2 led to an improvement in the stability of the resin-dentin adhesive interface. A longer exposure time (10 s) coupled with a higher irradiance (3200 mW/cm 2 ) resulted in a greater degree of degradation of the adhesive interface., Clinical Significance: To guarantee better stability of the adhesive interface, clinicians could be preferred a light-cured universal adhesive layer with 14-16 J/cm 2 . Higher irradiances should be avoided., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Fall detection and prevention require logged physiological activity data of a patient for a long period of time. This work develops a data acquisition system to collect motion data from multiple patients and store in a data base. A wireless sensor network is built using high precision inertia sensors and low power Zigbee wireless transceivers. Testing results prove the system function properly. Researchers and physicians can now retrieve and analyze the accurate data of the patient movement with ease.

The central aim of adhesive dentistry is to improve the compatibility between current adhesives and a range of substrates by employing diverse application techniques. Therefore, the overarching objective of this review is to offer a comprehensive analysis of dentin bonding systems, starting with an introduction to adhesion and a detailed overview of enamel and dentin structures, their histology, and the impact of dentin structure on resin–dentin bonding. It covers the mechanisms of resin–dentin bonding, including resin adhesive application, bonding mechanisms, and factors influencing efficacy. Further, this review explores the composition of resin adhesive systems, including acidic components, cross-linking monomers, solvents, and other critical elements. It also examines various adhesive strategies—etch-and-rinse, self-etch, and universal adhesives—highlighting their applications and advantages. The review extends to clinical applications of dental adhesion, including direct restorations, indirect restorations, and immediate dentin sealing (IDS), demonstrating the practical implications of adhesive systems in enhancing restoration longevity and performance. In conclusion, despite significant advancements, no gold-standard method for optimal adhesion exists. Each adhesive system has distinct strengths and limitations. The review emphasizes the importance of evaluating methods for achieving durable adhesion and staying current with technological advancements in adhesive systems. Summary: This review provides a thorough analysis of dentin bonding systems, delving into the structures and bonding mechanisms of both enamel and dentin. By exploring various adhesive systems and their components, it highlights the ongoing challenges in achieving optimal resin–dentin adhesion. The review also addresses the clinical applications of dental adhesion, including direct restorations, indirect restorations, and immediate dentin sealing (IDS), illustrating how different adhesive techniques impact clinical outcomes. It underscores the necessity for continuous innovation and assessment of adhesive systems to enhance long-term bonding effectiveness in clinical practice. [ABSTRACT FROM AUTHOR]

Background and Aims: The bond strength of direct composite restoration to the caries affected dentin is a challenging issue. Preparation of dentin with an antibacterial agent is a method for creating durable bonded restorations. The aim of this study was to investigate the effect of curcumin photosensitizer on the bond strength of a universal adhesive to the caries-affected dentin (CAD). Materials and Methods: In this experimental in vitro study, forty-four decayed human molar teeth were selected. After removing the surface enamel and dentin by a water-cooled saw, the decayed mid-coronal dentin was stained with a caries detection solution. The green and soft infected dentin was removed and CAD and hard and healthy surrounding dentin were left. Then, the remaining dentin surfaces were treated by 600 grit silicon carbide papers and polished. The specimens were divided into two groups (n=22): dentin pretreatment group by curcumin and control with no dentin pretreatment group by curcumin. Each group was divided into two subgroups based on the method of application of All-Bond Universal adhesive (Bisco, USA) (etch and rinseand self-etching methods). After placing the Aelite All Purpose Body (Bisco, USA) composite, all specimens were placed in a universal testing machine for microshear bond strength (µSBS) test. The failure mode of the isolated surfaces was evaluated under a stereomicroscope. Two-way ANOVA analysis was used for statistical analysis. Results: Based on the obtained results, intervention with the adhesive application method and surface pretreatment with curcumin had no significant effect on the bond strength. Also, there was no significant difference in the bond strength of the curcumin group in both etch and rinse and self-etching methods (SE=56.3±27.11 MPa; ER=52.4±84.11 MPa) (P=0.847). In the curcumin-free group, there was no significant difference between the two different adhesive application methods (P=0.187). Conclusion: The results obtained in the present study showed that the pretreatment of dentin affected by caries with light-sensitive curcumin and also use of a universal adhesive by either self-etching or self-etchinf methods had no influence on the microshear bond strength of the composite restoration. [ABSTRACT FROM AUTHOR]

Prior research has indicated that bisphosphonates (BPs) can improve periodontal disease because of their anti-osteoporosis properties. In vitro studies have shown that BPs induce cytotoxicity, inhibit wound healing, and thus affect periodontal disease. Denosumab and BPs have alternative indications. BP and denosumab are not known to correlate with gingival disorders. We assessed such a relationship by applying Bayesian and nonproportional analyses to data in the US FDA Adverse Event Reporting System (FAERS) database. The study analyzed BPs and denosumab-reported incidents with preferred terms found in the narrow Standardized MedDRA Queries for gingival disorders. A total of 5863 reported cases of gingival disorders were associated with five BPs (alendronate, pamidronate, ibandronate, risedronate, and zoledronate) and denosumab. More than 15% of patients with gingival disorders related to BPs and denosumab other than denosumab were hospitalized over short- or long-term periods. Our findings indicated BPs and denosumab had significant reporting odds ratios (ROR), proportional reporting ratios (PRR), and information components (IC) with respect to gingival disorders. Pamidronate had the highest association (ROR = 64.58, PRR = 57.99, IC = 5.71), while the weakest association was found with denosumab (ROR = 3.61, PRR = 3.60, IC = 1.77). Significant associations were found between the six drugs and gingival pain, gingival recession, gingivitis, periodontal disease, and periodontitis. In conclusion, our comprehensive overview of the correlations, clinical characteristics, and prognoses of BPs and denosumab-related gingival disorders suggests that these issues deserve continued surveillance and appropriate management. [ABSTRACT FROM AUTHOR]

Objective: This systematic review evaluated how different storage times and conditions affect universal adhesives' bond strength and degree of conversion (DC). Methods: A literature search was conducted in PubMed, Scopus, Web of Science, and Google Scholar databases for articles published from January 1st, 2000, until May 15th, 2022. The researchers comprehensively evaluated the articles using a multi-step process to identify articles relevant to the topic of interest. Quality assessment was performed through the ROBDEMAT tool. Due to the high heterogeneity in the preliminary data, performing a meta-analysis was not feasible. Results: A total of 3169 records were obtained, and after removing duplicates, 2267 remained. Following title and abstract screening, 2253 studies were excluded based on the predetermined exclusion criteria. Of the 14 remaining studies, seven were further excluded due to the use of non-universal adhesives, experimental adhesives, or lack of aging protocols. Ultimately, seven studies were included in this systematic review. All studies focused on bond strength, with only one addressing DC. The Findings showed that aging or different storage conditions generally led to reduced bond strength and DC values in universal adhesives, although exceptions with stable or improved properties were noted. Conclusions: Adhesives with higher pH and those containing methacrylamides, HEMA-free compositions, or hydrolytically stable monomers showed better durability than others. Strict adherence to storage instructions, lower storage temperatures, and immediate recapping of adhesive bottles after use is recommended to maintain adhesive properties. These findings provide insights for optimizing the long-term performance of universal adhesives in clinical settings. [ABSTRACT FROM AUTHOR]

This editorial reviews key themes, trends, and assumptions of organizational research on place and sustainability and introduces the special issue on the "Role of Place in Sustainability." While recent theorizing has often emphasized global issues such as grand challenges, planetary boundaries, and climate change, this special issue revisits the local by focusing on the role of place in sustainability. We discuss trends and subdomains of research on place and sustainability and identify key assumptions at the interplay between global and local perspectives. Instead of advocating for universal solutions or exclusively context-specific approaches, we highlight the concept of "senses of place," emphasizing the connections among diverse notions of place and intrinsic links to these locations. We demonstrate how the four insightful articles featured in this special issue provide a broader dialogue on place and sustainability. Finally, we outline a research agenda that identifies underexplored themes in place-based sustainability studies. [ABSTRACT FROM AUTHOR]

This study examined research interest in copper materials for caries management. We conducted an exhaustive literature search of English publications on copper materials for caries management. We removed duplicate publications and screened the titles and abstracts to identify relevant publications. Then, we analyzed the bibliometric data of the publications using the Bibliometrix and VOSviewer programs. This study included 75 laboratory studies, six clinical trials, and 17 reviews. Most of the original research studied copper or copper oxide nanoparticles (45/81, 56%). The materials could be doped into topical agents, restorative fillers, dental adhesives, dental implants, and orthodontic appliances. Since the first paper was published in 1980, publication counts gradually increased and surged in 2019. Among publications on copper materials for caries management, the publication counts and citations from 2019 to 2024 accounted for 65% (64/98) and 74% (1677/2255) over the last 45 years. Cocitation analysis revealed that the two main keywords were nanoparticles and antibacterial activity, and their burst strengths (period) were 3.84 (2021–2024) and 2.21 (2020–2021). The topics of the top two publications with the highest citation burst strength (period) are the antimicrobial effect of copper oxide nanoparticles (3.14, 2021–2022) and the dental application of copper nanoparticles (2.84, 2022–2024). In conclusion, this study revealed a growing interest in copper materials for caries management. [ABSTRACT FROM AUTHOR]