Search

Flexible strain sensors from biaxially stretched carbon nanotubes (CNTs)/polydimethylsiloxane (PDMS) nanocomposites are fabricated in this study. It is shown that biaxial stretching promotes the homogeneous distribution and alignment of CNTs in the stretching plane, improving the sensing performance of the strain sensors. The optimized stretching ratios (SRs) of CNT/PDMS nanocomposites are determined. Compared to an unstretched CNT/PDMS-1.0 sensor (gauge factor [GF] value = 0.73, detectable range from 0 to 60%), the 1.5 wt% CNT/PDMS-1.5 sensor (SR = 1.5) exhibits enhanced strain sensitivity (GF = 2.8), a wider detectable range (0-370%) and better performance stability. The GF values of CNT/PDMS-2.0 and CNT/PDMS-2.5 sensors with SRs of 2.0 and 2.5, respectively, were 1.18 and 1.06, respectively, due to more significant conductive network reconstruction in the process of applying strain, leading to a decreasing GF. The possibility of sensors in the application of wearable electronic components is also demonstrated. The sensor shows a clear and stable signal output when different strain modes are applied, such as tensile, compressive, bending, and twisting. KEYWORDS CNTs, flexible strain sensor, PDMS, simultaneous biaxial stretching, orcid.org/0000-0002-8714-6576 orcid.org/0000-0001-7355-8759 orcid.org/0000-0002-1148-777X orcid.org/0000-0001-6106-1868 1 | INTRODUCTION With the development of new materials and the great progress of manufacturing technology, flexible and stretchable electronic products, such as stretchable conductors, transistors, [...]

Abstract Alzheimer’s disease (AD) is a progressive neurodegenerative disorder characterized by the accumulation of Aβ plaques and neurofibrillary tangles, resulting in synaptic loss and neurodegeneration. The retina is an extension of the central nervous system within the eye, sharing many structural similarities with the brain, and previous studies have observed AD-related phenotypes within the retina. Three-dimensional retinal organoids differentiated from human pluripotent stem cells (hPSCs) can effectively model some of the earliest manifestations of disease states, yet early AD-associated phenotypes have not yet been examined. Thus, the current study focused upon the differentiation of hPSCs into retinal organoids for the analysis of early AD-associated alterations. Results demonstrated the robust differentiation of retinal organoids from both familial AD and unaffected control cell lines, with familial AD retinal organoids exhibiting a significant increase in the Aβ42:Aβ40 ratio as well as phosphorylated Tau protein, characteristic of AD pathology. Further, transcriptional analyses demonstrated the differential expression of many genes and cellular pathways, including those associated with synaptic dysfunction. Taken together, the current study demonstrates the ability of retinal organoids to serve as a powerful model for the identification of some of the earliest retinal alterations associated with AD.

Abstract Aim To determine the level of evidence for innovative high-risk medical devices at market entry. Methods We reviewed all Belgian healthcare payer (RIZIV-INAMI) assessor reports on novel implants or invasive medical devices (n = 18, Class IIb-III) available between 2018 to mid-2019 on applications submitted for inclusion on their reimbursement list. We also conducted a review of the literature on evidence gaps and an analysis of relevant legal and ethical frameworks within the European context. Findings Conformity assessment of medical devices is based on performance, safety, and an acceptable risk-benefit balance. Information submitted for obtaining CE marking is confidential and legally protected, limiting access to clinical evidence. Seven out of the 18 RIZIV-INAMI assessor reports (39%) included a randomized controlled trial (RCT) using the novel device, whilst 2 applications (11%) referred to an RCT that used a different device. The population included was inappropriate or unclear for 3 devices (17%). Only half of the applications presented evidence on quality of life or functioning and 2 (11%) presented overall survival data. Four applications (22%) included no data beyond twelve months. The findings from the literature demonstrated similar problems with the study design and the clinical evidence. Discussion and conclusions CE marking does not indicate that a device is effective, only that it complies with the law. The lack of transparency hampers evidence-based decision making. Despite greater emphasis on clinical benefit for the patient, the provisions of the European Medical Device Regulation (MDR) are not yet fully aligned with international ethical standards for clinical research. The MDR fails to address key issues, such as the lack of access to data submitted for CE marking and a failure to require evidence of clinical effectiveness. Indeed, a first report shows no improvement in the clinical evidence for implantable devices generated under the MDR. Thus, patients may continue to be exposed to ineffective or unsafe novel devices. The Health Technology Assessment Regulation plans for Joint Scientific Consultations for specific high-risk devices before companies begin their pivotal clinical investigations. The demanded comparative evidence should facilitate payer decisions. Nevertheless, there is also a need for legislation requiring comparative RCTs assessing patient-relevant outcomes for high-risk devices to ensure implementation, including development and implementation of common specifications for study designs.

Abstract Introduction Doctors have a legal requirement and duty of care to ensure patients are enabled to make an informed decision about their treatment, including discussion of the benefits, risks and alternatives to a procedure. A patient-centred approach to consent has been firmly established in Ireland, and fundamental to this is the ability to engage in a dialogue that offers comprehensible information to patients. Telemedicine has revolutionised the way we can deliver care to patients in the modern era of computers, tablets, and smartphones, and its use has been rapidly expanded. Novel digital strategies to improve the informed consent process for surgical procedures have been increasingly under investigation over the last 10–15 years and may offer a low cost, accessible and tailored solution to consent for surgical interventions. Within vascular surgery, superficial venous interventions have been associated with a high number medicolegal claims and also represents an area within the specialty with rapidly evolving technology and techniques. The ability to communicate comprehensible information to patients has never been greater. Thus, the author’s aim is to explore whether it is feasible and acceptable to deliver a digital health education intervention to patients undergoing endovenous thermal ablation (EVTA) to supplement the consent process. Methods This is a prospective, single centre, randomised controlled, feasibility trial recruiting patients with chronic venous disease deemed suitable to undergo EVTA. Patients will be randomised to receive either standard consent (SC) or a newly developed digital health education tool (dHET). The primary outcome is feasibility; assessing the recruitment and retention rate of participants and assessing acceptability of the intervention. Secondary outcomes include knowledge retention, anxiety and satisfaction. This feasibility trial is designed to recruit 40 patients, which will allow for a moderate dropout rate. This pilot study will inform the authors of the appropriateness of an adequately powered multicentre trial. Discussion To examine the role of a digital consent solution for EVTA. This may improve and standardise the consent dialogue with patients and may have the potential to reduce claims related to poor consent processes and disclosure of risks. Ethical committee reference Ethical approval has been sought and received from both the Bon Secours Hospital and RCSI (202109017), on 14 May 2021 and 10 October 2021, respectively. Trial registration ClinicalTrials.gov Identifier: NCT05261412 , registered on 1 March 2022

Background: Hamstring injuries are commonly considered the number one reason for delayed return to play and return to sport (RTS) across several sport disciplines. Traditionally, they are treated conservatively. However, recent literature has shown surgical intervention to improve recovery and expedite RTS. One potential explanation behind this phenomenon is conservative treatment does not address the disrupted length-tendon relationship, which can cause hamstring re-injury. Indications: Operative indications for tendon excision include patients with distal semitendinosus avulsions tear with retraction, especially patients who had already failed conservative management. Elite athletes with distal hamstring tears who have experienced a delayed RTS or desired activity level should also be considered for distal hamstring excision. Technique Description: A distal 4-cm incision, which was longitudinal in line with the semitendinosus, was made over the posterior knee at the measured level of the avulsed tendon stump, 2 cm proximal to the knee flexion crease. Blunt dissection was used for the subcutaneous layers, and the overlying hypertrophic and fibrotic tendon sheath was sharply incised. The torn and retracted tendon tissue was exteriorized. An allis clamp was used to provide tension on the distal semitendinosus, and mobilization of the avulsed tendon was performed. Sheath tissue surrounding the injured tendon was removed. The stump was whipstitched to provide further traction, and the hypertrophied portion of the tendon was excised. An open tendon stripper was implemented to exercise both limbs of the semitendinosus. The subcutaneous tissue and skin were closed, and an incisional wound vac was placed. Discussion/Conclusion: Distal avulsion tears of semitendinosus tendons can lead to unsatisfactory results with conservative treatment, with delayed RTS and recurrence of symptoms. Resection of hamstring tendon tissue may eliminate the recurrence of injury, along with inflammation, fibrosis, and hemorrhage associated with retraction reinjuries. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.

Hair follicles provide an easily accessible tissue for interrogating gene expression for multiple purposes in mammals. RNAlater® is a liquid storage solution that stabilises and preserves cellular RNA, eliminating the need to immediately process or freeze tissue specimens. The manufacturer advises storage of samples at 2-8°C overnight before transfer to -20°C. This study aimed to evaluate RNA integrity in hair follicle samples collected from horses, stabilized in RNAlater®, and stored under three short-term storage conditions. Mane hair samples complete with follicles were collected from four horses at a single time point. Approximately 15 hairs were placed in each of three 2 mL tubes containing 0.75ml RNAlater® solution. Test group A was stored at 4°C for 24-h, then decanted and stored at -20°C. Test groups B and C were stored at 4°C and 19°C (room temperature) respectively for 7 days, then decanted and stored at -20°C. RNA was isolated from all samples and RNA quantity and quality were measured. One-way ANOVA revealed no difference in RNA concentration (A:516 +/-125 ng/ml, B:273+/-93 ng/ml, C:476+/-176 ng/ml;P = 0.2) or quality (A:9.5 +/-0.19, B:9.8+/-0.09, C:9.2+/-0.35 RIN; P = 0.46) between the test groups. There were no group differences in mean Cycle Threshold values from qPCR validation assays confirming high-quality template cDNA. The results suggest that storage of hair follicles for one week in RNAlater® at cool or room temperature conditions will not compromise RNA integrity and will permit extended transport times from remote sampling locations without the need for freezing.

Microglia play crucial roles in immune responses and contribute to fundamental biological processes within the central nervous system (CNS). In neurodegenerative diseases, microglia undergo functional changes and can have both protective and pathogenic roles. Microglia in the retina, as an extension of the CNS, have also been shown to be affected in many neurological diseases. While our understanding of how microglia contribute to pathological conditions is incomplete, non-invasive in vivo imaging of brain and retinal microglia in living subjects could provide valuable insights into their role in the neurodegenerative diseases and open new avenues for diagnostic biomarkers. This mini-review provides an overview of the current brain and retinal imaging tools for studying microglia in vivo. We focus on microglia targets, the advantages and limitations of in vivo microglia imaging approaches, and applications for evaluating the pathogenesis of neurological conditions, such as Alzheimer’s disease and multiple sclerosis.

Background & Aims: Non-alcoholic fatty liver disease (NAFLD) is characterised by the accumulation of lipid droplets (LDs) within hepatocytes. Perilipin 2 (PLIN2) is the most abundant protein in hepatic LDs and its expression correlates with intracellular lipid accumulation. A recently discovered PLIN2 coding variant, Ser251Pro (rs35568725), was found to promote the accumulation of small LDs in embryonic kidney cells. In this study, we investigate the role of PLIN2-Ser251Pro (PLIN2-Pro251) on hepatic LD metabolism in vivo and research the metabolic phenotypes associated with this variant in humans. Methods: For our animal model, we used Plin2 knockout mice in which we expressed either human PLIN2-Pro251 (Pro251 mice) or wild-type human PLIN2-Ser251 (Ser251 mice) in a hepatocyte-specific manner. We fed both cohorts a lipogenic high-fat, high-cholesterol, high-fructose diet for 12 weeks. Results: Pro251 mice were associated with reduced liver triglycerides (TGs) and had lower mRNA expression of fatty acid synthase and diacylglycerol O-acyltransferase-2 compared with Ser251 mice. Moreover, Pro251 mice had a reduction of polyunsaturated fatty acids-TGs and reduced expression of epoxygenase genes. For our human study, we analysed the Penn Medicine BioBank, the Million Veteran Program, and UK Biobank. Across these databases, the minor allele frequency of PLIN2-Pro251 was approximately 5%. There was no association with the clinical diagnosis of NAFLD, however, there was a trend toward reduced liver fat in PLIN2-Pro251 carriers by MRI-spectroscopy in UK Biobank subjects. Conclusions: In mice lacking endogenous Plin2, expression of human PLIN2-Pro251 attenuated high-fat, high-fructose, high-cholesterol, diet-induced hepatic steatosis compared with human wild-type PLIN2-Ser251. Moreover, Pro251 mice had lower polyunsaturated fatty acids-TGs and epoxygenase genes expression, suggesting less liver oxidative stress. In humans, PLIN2-Pro251 is not associated with NAFLD. Impact and Implications: Lipid droplet accumulation in hepatocytes is the distinctive characteristic of non-alcoholic fatty liver disease. Perilipin 2 (PLIN2) is the most abundant protein in hepatic lipid droplets; however, little is known on the role of a specific polymorphism PLIN2-Pro251 on hepatic lipid droplet metabolism. PLIN2-Pro251 attenuates liver triglycerides accumulation after a high-fat-high-glucose-diet. PLIN2-Pro251 may be a novel lipid droplet protein target for the treatment of liver steatosis.

BackgroundThe demand for orthopedic specialist consultations for patients with osteoarthritis in public hospitals is high and continues to grow. Lengthy waiting times are increasingly affecting patients from low socioeconomic and culturally and linguistically diverse backgrounds who are more likely to rely on public health care. ObjectiveThis study aimed to co-design a digital health intervention for patients with OA who are waiting for an orthopedic specialist consultation at a public health service, which is located in local government areas (LGAs) of identified social and economic disadvantage. MethodsThe stakeholders involved in the co-design process included the research team; end users (patients); clinicians; academic experts; senior hospital staff; and a research, design, and development agency. The iterative co-design process comprised several key phases, including the collation and refinement of evidence-based information by the research team, with assistance from academic experts. Structured interviews with 16 clinicians (female: n=10, 63%; male: n=6, 38%) and 11 end users (age: mean 64.3, SD 7.2 y; female: n=7, 64%; male: n=4, 36%) of 1-hour duration were completed to understand the requirements for the intervention. Weekly workshops were held with key stakeholders throughout development. A different cohort of 15 end users (age: mean 61.5, SD 9.7 y; female: n=12, 80%; male: n=3, 20%) examined the feasibility of the study during a 2-week testing period. The System Usability Scale was used as the primary measure of intervention feasibility. ResultsOverall, 7 content modules were developed and refined over several iterations. Key themes highlighted in the clinician and end user interviews were the diverse characteristics of patients, the hierarchical structure with which patients view health practitioners, the importance of delivering information in multiple formats (written, audio, and visual), and access to patient-centered information as early as possible in the health care journey. All content was translated into Vietnamese, the most widely spoken language following English in the local government areas included in this study. Patients with hip and knee osteoarthritis from culturally and linguistically diverse backgrounds tested the feasibility of the intervention. A mean System Usability Scale score of 82.7 (SD 16) was recorded for the intervention, placing its usability in the excellent category. ConclusionsThrough the co-design process, we developed an evidence-based, holistic, and patient-centered digital health intervention. The intervention was specifically designed to be used by patients from diverse backgrounds, including those with low health, digital, and written literacy levels. The effectiveness of the intervention in improving the physical and mental health of patients will be determined by a high-quality randomized controlled trial.

Objective: Alcohol-associated liver disease (ALD) is the leading cause of liver-related mortality worldwide. Current strategies to manage ALD focus largely on advanced stage disease, however, metabolic changes such as glucose intolerance are apparent at the earliest stage of alcoholic steatosis and increase the risk of disease progression. Ceramides impair insulin signaling and accumulate in ALD, and metabolic pathways involving ceramide synthase 6 (CerS6) are perturbed in ALD during hepatic steatosis. In this study, we aimed to investigate the role of CerS6 in ALD development and the relevance of CerS6 to human ALD. Methods: C57BL/6 WT and CerS6 KO mice of both sexes were fed either a Lieber-DeCarli control (CON) or 15% ethanol (EtOH) diet for six weeks. In vivo metabolic tests including glucose and insulin tolerance tests (GTT and ITT) and energy expenditure were performed. The mice were euthanized, and serum and liver lipids and liver histology were examined. For in vitro studies, CerS6 was deleted in human hepatocytes, VL17A and cells were incubated with EtOH and/or C16:0-ceramides. RNAseq analysis was performed in livers from mice and human patients with different stages of ALD and diseased controls. Results: After six weeks on an EtOH diet, CerS6 KO mice had reduced body weight, food intake, and %fat mass compared to WT mice. Energy expenditure increased in both male and female KO mice, however, was only statistically significant in male mice. In response to EtOH, WT mice developed mild hepatic steatosis, while steatosis was ameliorated in KO mice as determined by H&E and ORO staining. KO mice showed significantly decreased long-chain ceramide species, especially C16:0-ceramides, in the serum and liver tissues compared to WT mice. CerS6 deletion decreased serum TG and NEFA only in male not female mice. CerS6 deletion improved glucose tolerance and insulin resistance in EtOH-fed mice of both sexes. RNAseq analysis revealed that 74 genes are significantly upregulated and 66 genes are downregulated by CerS6 deletion in EtOH-fed male mice, with key network pathways including TG biosynthetic process, positive regulation of lipid localization, and fat cell differentiation. Similar to RNAseq results, absence of CerS6 significantly decreased mRNA expression of lipid droplet associated proteins in EtOH-fed mice. In vitro, EtOH stimulation significantly increased PLIN2 protein expression in VL17A cells while CerS6 deletion inhibited EtOH-mediated PLIN2 upregulation. C16:0-ceramide treatment significantly increased PLIN2 protein expression compared to CON. Notably, progression of ALD in humans was associated with increased hepatic CerS6 expression. Conclusions: Our findings demonstrate that CerS6 deletion improves glucose homeostasis in alcohol-fed mice and exhibits sex-based differences in the attenuation of EtOH-induced weight gain and hepatic steatosis. Additionally, we unveil that CerS6 plays a major role as a regulator of lipid droplet biogenesis in alcohol-induced intra-hepatic lipid droplet formation, identifying it as a putative target for early ALD management.

ABSTRACTMedical Professionalism (MP) defined as values, behaviours and attitudes that promote professional relationships, public trust and patient safety is a vital competency in health profession education. MP has a distinctive uniqueness due to cultural, contextual, conceptual, and generational variations. There is no standard instructional strategy to probe the understanding of MP in a cohesive, structured, interactive manner. This study aimed to investigate undergraduate medical students’ understanding of MP using express team-based learning (e-TBL) at both campuses of Royal College of Surgeons Ireland (RCSI). Using the key principles of a sociocultural theoretical lens in adult learning theory, we designed e-TBL as a context-learning-based educational strategy. We conducted three e-TBL sessions on cross-cultural communication and health disparities, a reflective report on clinical encounters, and professionalism in practice. We collected, collated, and analyzed the student experiences qualitatively using data gathered from team-based case discussions during e-TBL sessions. A dedicated working group developed very short-answer questions for the individual readiness assurance test (IRAT) and MP-based case scenarios for team discussions. In this adapted 4-step e-TBL session, pre-class material was administered, IRAT was undertaken, and team-based discussions were facilitated, followed by facilitator feedback. A qualitative inductive thematic analysis was performed, which generated subthemes and themes illustrated in excerpts. Our thematic analysis of data from 172 students (101 from Bahrain and 71 from Dublin) yielded four unique themes: incoming professional attitudes, transformative experiences, sociological understanding of professionalism, and new professional identity formation. This qualitative study provides a deeper understanding of medical students’ perceptions of medical professionalism. The generated themes resonated with divergent and evolving elements of MP in an era of socioeconomic and cultural diversity, transformative experiences, and professional identity formation. The core elements of these themes can be integrated into the teaching of MP to prepare fit-to-practice future doctors.

The combination of a high sensitivity and a wide strain detection range in conductive polymer composites-based flexible strain sensors is still challenging to achieve. Herein, a double-percolation structural fiber strain sensor based on carbon nanotubes (CNT)/styrene butadiene styrene (SBS)@thermoplastic polyurethane (TPU) composite was fabricated by a simple melt mixing and fused filament fabrication strategy, in which the CNT/SBS and TPU were the conductive and insulating phases, respectively. Compared with the sensor without the double percolated structure, the CNT/SBS@TPU sensor achieved a lower percolation threshold (from 2.0 to 0.5 wt%, a reduction of 75%), and better electrical and sensing performance. It is shown that the strain detection range of the CNT/SBS@TPU sensor increases with increasing CNT loading. An opposite trend was observed for the sensitivity. The 1%-CNT/SBS@TPU sensor exhibited a high conductivity (1.08 * [10.sup.-3] S/m), high sensitivity (gauge factor of 2.65 [10.sup.6] at 92% strain), wide strain detection range (0.2%-92% strain), high degree of linearity ([R.sup.2] = 0.954 at 0-10% strain), broad monitoring frequencies (0.05-0.5 Hz), and excellent stability (2000 cycles). Moreover, the CNT/SBS@TPU sensor was shown to successfully monitor a range of human physiological activities and to be capable of tactile perception and weight distribution sensing. KEYWORDS double percolated structure, fiber strain sensor, nanocomposites, styrene butadiene styrene, thermoplastic polyurethane, 1 | INTRODUCTION In recent years, conductive polymer composites (CPCs) composed of elastic matrix materials and conductive nanofillers have been rapidly developed and are widely used in various applications including [...]

Abstract This work shows that radio‐frequency (RF) fields can simultaneously align carbon nanotubes (CNTs) dispersed in a resin and induce Joule heating to cure the resin. The timescales of alignment and curing using RF heating are numerically computed and compared at different field strengths in order to determine a temperature where alignment happens before the matrix crosslinks. Composites are experimentally fabricated at the desired target temperature and are optically analyzed and quantified; the CNT network is successfully aligned in the direction of the applied electric field. This methodology can be used to create composites where the local alignment can be varied across the sample. Composites fabricated using RF fields have higher electrical conductivity in the direction of the aligned CNTs than an oven‐cured, randomly aligned sample. Also, RF‐cured nanocomposites exhibit higher tensile strength and modulus in the direction of alignment compared to an oven‐cured sample. Finally, it is further demonstrated how this methodology can be coupled with a direct ink writing additive manufacturing process to induce alignment in any desired direction, even orthogonal to the shear forces in the extrusion direction.

In order to ensure a strong research design, literature stresses the adoption of a research paradigm that is consistent with the researcher’s beliefs about the nature of reality. In this article we provide an overview of research paradigm choices in relation to the creation of a Medical Education e-Professionalism (MEeP) framework discussing the research design, research methods, data collection and analysis to enhance the transparency of our previously published research. The MEeP framework was conceived to help Health Care Professionals (HCPs) safeguard the construct of professionalism in the digital context. This entire process was heavily informed by wider readings and deliberations of published literature on e-professionalism. Although the MEeP framework research journey has been published, the paradigms approach was not discussed in any detail. Considering that one of the duties of medical educator is to balance the service and science by bringing the theoretical underpinnings of one’s research to public attention and scrutiny so as to nullify the notion of ‘weak’ research. We were compelled to unfold this paradigm story of the MEeP framework in a detailed manner. In an effort to make our research both robust and effective, this study portrays a philosophical approach to guide future research designs and methodological choices by detailing our rationale for pragmatism as a choice of paradigm.

Objectives The fundamental role of medical education is the transformation of students to doctors, through a process of education and professional identity formation (PIF), which can be informed by several educational, behavioural and emotional factors. PIF has been deemed to be of equal importance to the acquisition of clinical knowledge and skills and includes constructs such as professionalism, leadership and resilience. We aimed to assess p rofessional i dentity formation, professiona l ism, l eadership a nd r esilience (PILLAR) in the junior years of medical school in the 2020/2021 academic year and illustrate the potential role of quantitative assessment to demonstrate progression in these areas. In this research, we provide the methods and baseline results for the PILLAR study. Methods We implemented a compulsory assessment in pre-clinical years of graduate entry and direct entry medicine at the Royal College of Surgeons in Ireland University of Medicine and Health Sciences, Dublin, Ireland. Validated scales were used to assess students’ PILLAR. Descriptive and univariable statistical techniques were used to compare student scores between respective years. Results A total of 1311 students (92% response rate) provided their consent for research. For the psychometric scales, there were no evident trends among the years on these assessment measures. Results indicated significant differences in all measures, however, these did not correspond to ascending years of seniority. Conclusion The PILLAR methodology provides important information on the challenges of quantitatively assessing medical students in the four key areas of PIF, professionalism, leadership, and resilience. Our cross-sectional results point to cohort effects, without the expected progression per year in the cross-sectional data, or suggest that the chosen quantitative measures may be problematic for these constructs in pre-clinical students. Therefore, while we believe that PILLAR has potential as a progress test for these constructs, this will only truly be elucidated by repeated measures of each cohort over time.

This online structured survey has demonstrated the global impact of the COVID-19 pandemic on vascular services. The majority of centres have documented marked reductions in operating and services provided to vascular patients. In the months during recovery from the resource restrictions imposed during the pandemic peaks, there will be a significant vascular disease burden awaiting surgeons. One of the most affected specialties.