Search

As a sustainable alternative to using virgin polymer, we propose the use of recycled polymer for the fabrication of passive radiative cooling materials to tackle both the increasing demand for cooling systems and to upcycle plastic waste. Using recycled acrylic sheets as the binder for BaSO4 thorough sol–gel method, a sustained 1.2 °C sub-ambient temperature during daytime and 3 °C sub-ambient temperature during nighttime was achieved under the hot and humid conditions of the tropical climate. The coating achieved 97.7 % solar reflectance and 95 % infrared emittance. Separately, when porosity is introduced to recycled acrylic sheets through a phase inversion method, a near-ambient temperature during noontime and sustained sub-ambient temperature of 2.5 °C during nighttime was achieved (with 96.7 % solar reflectance). Comparable performances are also obtained using recycled polyvinyl chloride (PVC) pipe and expanded polystyrene (EPS) foam. [ABSTRACT FROM AUTHOR]

Silicon monoxide (SiO) is promising to be anode materials for next‐generation lithium‐ion batteries owing to its high capacity, but its application is hindered by the poor electrical conductivity, large volume expansion (≈150%) caused by the lithiation, and low lithium‐ion transport efficiency. Herein, TiO2/reduced graphene oxide (rGO) double‐layer‐coating strategy is proposed to solve the earlier issues. The anatase phase of TiO2 provides high mechanical strength and partial capacity in the SiO anode, and its lithiation product (LixTiO2) greatly enhances the lithium‐ion transport efficiency. The rGO coating on SiO makes a great contribution to suppressing the volume expansion of SiO particles during the lithiation and improves the electrical conductivity of SiO electrodes. The double‐layer coating strategy isolates SiO from direct contact with the electrolyte, reduces the loss of electrolyte, and improves the Coulombic efficiency of the batteries. Consequently, the TiO2/rGO double‐layer‐coated SiO composite maintains a capacity of 670 mAh g−1 after 200 cycles at 0.5 A g−1. The results indicate that the structural design of SiO@TiO2–rGO composite can solve the drawbacks of SiO and improve its cycling performance. Herein, a new route to prepare high‐performance SiO‐based anode for lithium‐ion batteries is provided. [ABSTRACT FROM AUTHOR]

The purpose of this study was to analyze the relationship between COL6A5 (collagen type VI alpha 5 chain) and LOC102181374 (alcohol dehydrogenase 1) genes and the production performance of Liaoning cashmere goats by single nucleotide polymorphism (SNP). We have searched for SNP loci of COL6A5 and LOC102181374 genes through sequence alignment and PCR experiments, and have used SPSS and SHEsis software to analyze production data. We obtained five SNP loci in total, including three SNP loci (G50985A, G51140T, G51175A) in COL6A5 gene and two SNP loci (A10067G, T10108C) in LOC102181374 gene. The genotypes G50985A (AG), G51140T (GT), G51175A (AA), A10067G (AA), and T10108C (CC) of these loci have certain advantages in improving the production performance of Liaoning cashmere goats. The haplotype combinations that can improve production performance in COL6A5 gene were H1H5:AGGGAG, H4H4:GGGGAA, and H4H4:GGGGAA. H3H3:GGCC and H2H4:AGTT were the dominant combinations in LOC102181374 gene. At G51175A and A10067G loci, we found that H1H2:AAAG and H1H3:AGAA have dominant effects. These results may provide some support for the molecular breeding of production traits in Liaoning cashmere goats. [ABSTRACT FROM AUTHOR]

Liaoning cashmere goat (LCG) is one of the excellent cashmere goat breeds in China. Because of its larger size, better cashmere, and better cashmere production performance, people pay special attention to it. This article mainly studied the relationship between SNP loci of LIPE gene and ITGB4 gene and milk production, cashmere production and body measurement traits of LCGs. We further identified potential SNP loci by PCR-Seq polymorphism detection and gene sequence comparison of LIPE and ITGB4 genes. Further, we use SPSS and SHEsis software to analyze their relationship to production performance. The consequence indicated that CC genotype of LIPE gene T16409C locus was dominant genotype in milk production and cashmere production, while CT genotype of LIPE gene T16409C locus was dominant in body size. The CT genotype of C168T locus of ITGB4 gene is the dominant genotype of body type and cashmere production, while the dominant genotype of milk production is TT genotype. Through joint analysis, in haploid combinations, H1H2:CCCT is the dominant haplotype combination in cashmere fineness. H3H4:TTCT is a dominant haplotype combination of milk production traits and body measurement traits. These dominant genotypes can provide a reliable basis for the study of production performance of LCG. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the relationship between the polymorphism of bile acid-CoA: amino acid N-acyltransferase (BAAT) and collagen type I alpha 1 chain (COL1A1) genes and the production performance of Liaoning Cashmere goat (LCG). The potential single nucleotide polymorphisms (SNPs) of LCG were detected by sequence comparison of BAAT and COL1A1 genes and PCR-Seq polymorphism, and the effect of SNPs on production performance was analyzed by SPSS software. The results showed that three SNPs loci were detected in BAAT gene: G7900A, T7967C, C7998T, and one SNP locus T6716C was detected in COL1AL gene. At G7900A locus, the dominant genotype for cashmere performance was GG, and the dominant genotype for body measurement traits and milk production traits was AG. At T7967C locus, the dominant genotype for cashmere performance was TT, and the dominant genotype for body measurement traits and milk production traits was CC. At C7998T locus, TT was the dominant genotype for cashmere performance, body measurement traits, and milk production traits. At the T6716C locus, TT was the dominant genotype for cashmere performance, body measurement traits, and milk production traits. H1H1: AACC is the dominant haplotype combination. Therefore, this study will provide a reliable reference for future research on cashmere production performance, body measurement traits, and milk production traits of LCG. [ABSTRACT FROM AUTHOR]

Reproductive traits have a high economic value in goat breeding, and increasing the number of lambs produced by ewes is of great importance to improve the production efficiency of goat farming. Lambing traits in goats are low heritability traits, but their genetic basis is ultimately determined by genes. This study aimed to investigate the relationship between INHA, RARG, and PGR gene polymorphisms and production performance, such as lambing, cashmere production, milk production, and body size in Liaoning cashmere goats. A total of six single nucleotide polymorphisms (SNPs) loci were identified in these three genes, G144A and T504C on the INHA gene, A56G, G144A, G490C on the RARG gene, and G109519T on the PGR gene. For lambing and cashmere production traits, the AA genotype of G144A on the INHA gene, TT on the T504C genotype, GG genotype of G144A on the INHA gene, A56G, G144A, and T504C on RARG and G109519T on PGR gene are dominant genotypes. AATT is a dominant haplotype combination. Allele G can be used as a molecular marker for lambing, cashmere, and milk production traits in Liaoning cashmere goats. Marker-assisted selection can be used for early selection to achieve improvement of genetic traits in Liaoning cashmere goats. [ABSTRACT FROM AUTHOR]