Search

The garnet structure has been proposed as a potential crystalline nuclear waste form for accommodation of actinide elements, especially uranium (U). In this study, yttrium iron garnet (YIG) as a model garnet host was studied for the incorporation of U analogs, cerium (Ce) and thorium (Th), incorporated by a charge-coupled substitution with calcium (Ca) for yttrium (Y) in YIG, namely, 2Y(3+) = Ca(2+) + M(4+), where M(4+) = Ce(4+) or Th(4+). Single-phase garnets Y3-xCa0.5xM0.5xFe5O12 (x = 0.1-0.7) were synthesized by the citrate-nitrate combustion method. Ce was confirmed to be tetravalent by X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. X-ray diffraction and (57)Fe-Mössbauer spectroscopy indicated that M(4+) and Ca(2+) cations are restricted to the c site, and the local environments of both the tetrahedral and the octahedral Fe(3+) are systematically affected by the extent of substitution. The charge-coupled substitution has advantages in incorporating Ce/Th and in stabilizing the substituted phases compared to a single substitution strategy. Enthalpies of formation of garnets were obtained by high temperature oxide melt solution calorimetry, and the enthalpies of substitution of Ce and Th were determined. The thermodynamic analysis demonstrates that the substituted garnets are entropically rather than energetically stabilized. This suggests that such garnets may form and persist in repositories at high temperature but might decompose near room temperature.

Suppressing lithium (Li) dendrite growth is one of the most critical challenges for the development of Li metal batteries. Here, we report for the first time the growth of dendrite-free lithium films with a self-aligned and highly compacted nanorod structure when the film was deposited in the electrolyte consisting of 1.0 M LiPF6 in propylene carbonate with 0.05 M CsPF6 as an additive. Evolution of both the surface and the cross-sectional morphologies of the Li films during repeated Li deposition/stripping processes were systematically investigated. It is found that the formation of the compact Li nanorod structure is preceded by a solid electrolyte interphase (SEI) layer formed on the surface of the substrate. Electrochemical analysis indicates that an initial reduction process occurred at ∼ 2.05 V vs Li/Li(+) before Li deposition is responsible for the formation of the initial SEI, while the X-ray photoelectron spectroscopy indicates that the presence of CsPF6 additive can largely enhance the formation of LiF in this initial SEI. Hence, the smooth Li deposition in Cs(+)-containing electrolyte is the result of a synergistic effect of Cs(+) additive and preformed SEI layer. A fundamental understanding on the composition, internal structure, and evolution of Li metal films may lead to new approaches to stabilize the long-term cycling stability of Li metal and other metal anodes for energy storage applications.

A fundamental understanding of the mechanisms of both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in nonaqueous lithium-oxygen (Li-O2) batteries is essential for the further development of these batteries. In this work, we systematically investigate the mechanisms of the ORR/OER reactions in nonaqueous Li-O2 batteries by using electron paramagnetic resonance (EPR) spectroscopy, using 5,5-dimethyl-pyrroline N-oxide as a spin trap. The study provides direct verification of the formation of the superoxide radical anion (O2(˙-)) as an intermediate in the ORR during the discharge process, while no O2(˙-) was detected in the OER during the charge process. These findings provide insight into, and an understanding of, the fundamental reaction mechanisms involving oxygen and guide the further development of this field., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The long-term operation of Li-O2 batteries under full discharge/charge conditions is investigated in a glyme-based electrolyte. The formation of stable interfacial layer on the electrode surface during the initial cycling stabilizes reaction products at subsequent cycling stages as demonstrated by quantitative analyses of the discharge products and the gases released during charging. There is a quick switch from the predominant formation of Li2O2 to the predominant formation of side products during the first few cycles. However, after the formation of the stable interfacial layer, the yield of Li2O2 in the reaction products is stabilized at about 33-40%. Extended cycling under full discharge/charge conditions is achievable upon selection of appropriate electrode materials (carbon source and catalyst) and cycling protocol. Further investigation on the interfacial layer, which in situ forms on air electrode, may increase the long-term yield of Li2O2 during the cycling and enable highly reversible Li-O2 batteries required for practical applications.

Water reduction under two different visible-light ranges (λ > 400 nm and λ > 435 nm) was investigated in gold-loaded titanium dioxide (Au-TiO2) heterostructures with different sizes of Au nanoparticles (NPs). Our study clearly demonstrates the essential role played by Au NP size in plasmon-driven H2O reduction and reveals two distinct mechanisms to clarify visible-light photocatalytic activity under different excitation conditions. The size of the Au NP governs the efficiency of plasmon-mediated electron transfer and plays a critical role in determining the reduction potentials of the electrons transferred to the TiO2 conduction band. Our discovery provides a facile method of manipulating photocatalytic activity simply by varying the Au NP size and is expected to greatly facilitate the design of suitable plasmonic photocatalysts for solar-to-fuel energy conversion.

A hydrogen-evolving homogeneous Ni(P2N2)2 electrocatalyst with peripheral ester groups has been covalently attached to a 1,2,3-triazolyllithium-terminated planar glassy carbon electrode surface. Coupling proceeds with both the Ni(0) and the Ni(II) complexes. X-ray photoemission spectra show excellent agreement between the Ni(0) coupling product and its parent complex, and voltammetry of the surface-confined system shows that a single species predominates with a surface density of 1.3 × 10(-10) mol cm(-2), approaching the value estimated for a densely packed monolayer. With the Ni(II) system, both photoemission and voltammetric data show speciation to unidentified products on coupling, and the surface density is 6.7 × 10(-11) mol cm(-2). The surface-confined Ni(0) complex is an electroctalyst for hydrogen evolution, showing the onset of catalytic current at the same potential as the soluble parent complex. Decomposition of the surface-confined species is observed in acidic acetonitrile. This is interpreted to reflect the lability of the Ni(II)-phosphine interaction and the basicity of the free phosphine and bears on concurrent efforts to implement surface-confined Ni(P2N2)2 complexes in electrochemical or photoelectrochemical devices.

Our previous study showed that formation of TcS2-like phases is favored over TcO2 under sulfidic conditions stimulated by nano zerovalent iron. This study further investigates the stability of Tc(IV) sulfide upon reoxidation by solution chemistry, solid phase characterization, and X-ray absorption spectroscopy. Tc dissolution data showed that Tc(VII) reduced by sulfide-transformed nZVI has substantially slower reoxidation kinetics than Tc(VII) reduced by nZVI only. The initial inhibition of Tc(IV) dissolution at S/Fe = 0.112 is due to the redox buffer capacity of FeS, which is evidenced by the parallel trends in oxidation-reduction potentials (ORP) and Tc dissolution kinetics. The role of FeS in inhibiting Tc oxidation is further supported by the Mössbauer spectroscopy and micro X-ray diffraction data at S/Fe = 0.112, showing persistence of FeS after 24-h oxidation but complete oxidation after 120-h oxidation. X-ray absorption spectroscopy data for S/Fe = 0.011 showed significantly increasing percentages of TcS2 in the solid phase after 24-h oxidation, indicating stronger resistance of TcS2 to oxidation. At S/Fe = 0.112, the XAS results revealed significant transformation of Tc speciation from TcS2 to TcO2 after 120-h oxidation. Given that no apparent Tc dissolution occurred during this period, the speciation transformation might play a secondary role in hindering Tc oxidation. Collectively, the results indicate that sequestrating Tc as TcS2 under stimulated sulfate reduction is a promising strategy to improve the long-term stability of reduced Tc in subsurface remediation.

Lithium-sulfur (Li-S) battery is one of the most promising energy storage systems because of its high specific capacity of 1675 mAh g(-1) based on sulfur. However, the rapid capacity degradation, mainly caused by polysulfide dissolution, remains a significant challenge prior to practical applications. This work demonstrates that a novel Ni-based metal organic framework (Ni-MOF), Ni6(BTB)4(BP)3 (BTB = benzene-1,3,5-tribenzoate and BP = 4,4'-bipyridyl), can remarkably immobilize polysulfides within the cathode structure through physical and chemical interactions at molecular level. The capacity retention achieves up to 89% after 100 cycles at 0.1 C. The excellent performance is attributed to the synergistic effects of the interwoven mesopores (∼2.8 nm) and micropores (∼1.4 nm) of Ni-MOF, which first provide an ideal matrix to confine polysulfides, and the strong interactions between Lewis acidic Ni(II) center and the polysulfide base, which significantly slow down the migration of soluble polysulfides out of the pores, leading to the excellent cycling performance of Ni-MOF/S composite.

Porous carbon nanofiber (CNF)-supported tin-antimony (SnSb) alloys are synthesized and applied as a sodium-ion battery anode. The chemistry and morphology of the solid electrolyte interphase (SEI) film and its correlation with the electrode performance are studied. The addition of fluoroethylene carbonate (FEC) in the electrolyte significantly reduces electrolyte decomposition and creates a very thin and uniform SEI layer on the cycled electrode surface, which an promote the kinetics of Na-ion migration/transportation, leading to excellent electrochemical performance., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Hydrogenase enzymes use first-row transition metals to interconvert H2 with protons and electrons, reactions that are important for the storage and recovery of energy from intermittent sources such as solar, hydroelectric, and wind. Here we present Ni(P(Cy)2N(Gly)2)2, a water-soluble molecular electrocatalyst with the amino acid glycine built into the diphosphine ligand framework. Proton transfer between the outer coordination sphere carboxylates and the second coordination sphere pendant amines is rapid, as observed by cyclic voltammetry and FTIR spectroscopy, indicating that the carboxylate groups may participate in proton transfer during catalysis. This complex oxidizes H2 (1-33 s(-1)) at low overpotentials (150-365 mV) over a range of pH values (0.1-9.0) and produces H2 under identical solution conditions (>2400 s(-1) at pH 0.5). Enzymes employ proton channels for the controlled movement of protons over long distances-the results presented here demonstrate the effects of a simple two-component proton channel in a synthetic molecular electrocatalyst.

The reaction of a lithium acetylide-ethylenediamine complex with azide-terminated glassy carbon surfaces affords 1,2,3-triazolyllithium surface groups that are active toward covalent C-C coupling reactions, including salt metathesis with an aliphatic halide and nucleophilic addition at an aldehyde. Surface ferrocenyl groups were introduced by reaction with (6-iodohexyl)ferrocene; the voltammetry of electrode samples shows narrow, symmetric peaks indicating uniform attachment. X-ray photoelectron and reflectance infrared spectroscopic data provide further support for the surface-attached products. Formation of the 1,2,3-triazolyllithium linkage requires neither a catalyst nor a strained alkyne. Coverages obtained by this route are similar to those obtained by the more common Cu(I)-catalyzed alkyne-azide coupling (CuAAC) of ethynylferrocene with surface azides. Preconditioning of the glassy carbon disk electrodes at ambient temperature under nitrogen affords coverages comparable to those reported with preconditioning at 1000 °C under hydrogen/nitrogen.

The ability to harness the nanoscale structural properties is essential for the exploration of functional properties of nanomaterials. This report demonstrates a novel strategy exploring bifunctional nanoparticles for spectroscopic detection and magnetic intervention of DNA assembly, disassembly, and enzyme cutting processes in a solution phase. In contrast to existing single-function based approaches, this strategy exploits magnetic MnZn ferrite nanoparticles decorated with gold or silver on the surface to retain adequate magnetization while producing sufficient plasmonic resonance features to impart surface-enhanced Raman scattering (SERS) functions. The decoration of MnZn ferrite nanoparticles with Au or Ag (MZF/Au or MZF/Ag) was achieved by thermally activated deposition of Au or Ag atoms/nanoparticles on MZF nanoparticles. Upon interparticle double-stranded DNA linkage of the MZF/Au (or MZF/Ag) nanoparticles with gold nanoparticles labeled with a Raman reporter, the resulting interparticle "hot spots" are shown to enable real time SERS monitoring of the DNA assembly, disassembly, or enzyme cutting processes, where the magnetic component provides an effective means for intervention of the biomolecular processes in the solution. The unique bifunctional combination of the SERS "hot spots" and the magnetic separation capability serves as the first example of bifunctional nanoprobes for biomolecular recognition and intervention.

Cr-doped core-shell iron/iron-oxide nanoparticles (NPs) containing 0, 2, 5, and 8 at.% of Cr dopant were synthesized via a nanocluster deposition system and their structural and magnetic properties were investigated. We observed the formation of a σ-FeCr phase in 2 at.% of Cr doping in core-shell NPs. This is unique since it was reported in the past that the σ-phase forms above 20 at.% of Cr. The large coercive field and exchange bias are ascribed to the antiferromagnetic Cr2O3 layer formed with the Fe-oxide shell, which also acts as a passivation layer to decrease the Fe-oxide shell thickness. The additional σ-phase in the core and/or Cr2O3 in the shell cause the hysteresis loop to appear tight waisted near the zero-field axis. The exchange interaction competes with the dipolar interaction with the increase of σ-FeCr grains in the Fe-core. The interaction reversal has been observed in 8 at.% of Cr. The observed reversal mechanism is confirmed from the Henkel plot and delta M value, and is supported by a theoretical watermelon model based on the core-shell nanostructure system.

This review examines characterization challenges inherently associated with understanding nanomaterials and the roles surface and interface characterization methods can play in meeting some of the challenges. In parts of the research community, there is growing recognition that studies and published reports on the properties and behaviors of nanomaterials often have reported inadequate or incomplete characterization. As a consequence, the true value of the data in these reports is, at best, uncertain. With the increasing importance of nanomaterials in fundamental research and technological applications, it is desirable that researchers from the wide variety of disciplines involved recognize the nature of these often unexpected challenges associated with reproducible synthesis and characterization of nanomaterials, including the difficulties of maintaining desired materials properties during handling and processing due to their dynamic nature. It is equally valuable for researchers to understand how characterization approaches (surface and otherwise) can help to minimize synthesis surprises and to determine how (and how quickly) materials and properties change in different environments. Appropriate application of traditional surface sensitive analysis methods (including x-ray photoelectron and Auger electron spectroscopies, scanning probe microscopy, and secondary ion mass spectroscopy) can provide information that helps address several of the analysis needs. In many circumstances, extensions of traditional data analysis can provide considerably more information than normally obtained from the data collected. Less common or evolving methods with surface selectivity (e.g., some variations of nuclear magnetic resonance, sum frequency generation, and low and medium energy ion scattering) can provide information about surfaces or interfaces in working environments ( operando or in situ ) or information not provided by more traditional methods. Although these methods may require instrumentation or expertise not generally available, they can be particularly useful in addressing specific questions, and examples of their use in nanomaterial research are presented.

Under anoxic conditions, soluble pertechnetate (⁹⁹TcO₄⁻) can be reduced to less soluble TcO₂·nH₂O, but the oxide is highly susceptible to reoxidation. Here we investigate an alternative strategy for remediation of Tc-contaminated groundwater whereby sequestration as Tc sulfide is favored by sulfidic conditions stimulated by nano zerovalent iron (nZVI). nZVI was pre-exposed to increasing concentrations of sulfide in simulated Hanford groundwater for 24 h to mimic the onset of aquifer biotic sulfate reduction. Solid-phase characterizations of the sulfidated nZVI confirmed the formation of nanocrystalline FeS phases, but higher S/Fe ratios (>0.112) did not result in the formation of significantly more FeS. The kinetics of Tc sequestration by these materials showed faster Tc removal rates with increasing S/Fe between 0 and 0.056, but decreasing Tc removal rates with S/Fe > 0.224. The more favorable Tc removal kinetics at low S/Fe could be due to a higher affinity of TcO₄⁻ for FeS than iron oxides, and electron microscopy confirmed that the majority of the Tc was associated with FeS phases. The inhibition of Tc removal at high S/Fe appears to have been caused by excess HS(-). X-ray absorption spectroscopy revealed that as S/Fe increased, the pathway for Tc(IV) formation shifted from TcO₂·nH2₂ to Tc sulfide phases. The most substantial change of Tc speciation occurred at low S/Fe, coinciding with the rapid increase in Tc removal rate. This agreement further confirms the importance of FeS in Tc sequestration.

Rechargeable lithium metal batteries are considered the "Holy Grail" of energy storage systems. Unfortunately, uncontrollable dendritic lithium growth inherent in these batteries (upon repeated charge/discharge cycling) has prevented their practical application over the past 40 years. We show a novel mechanism that can fundamentally alter dendrite formation. At low concentrations, selected cations (such as cesium or rubidium ions) exhibit an effective reduction potential below the standard reduction potential of lithium ions. During lithium deposition, these additive cations form a positively charged electrostatic shield around the initial growth tip of the protuberances without reduction and deposition of the additives. This forces further deposition of lithium to adjacent regions of the anode and eliminates dendrite formation in lithium metal batteries. This strategy may also prevent dendrite growth in lithium-ion batteries as well as other metal batteries and transform the surface uniformity of coatings deposited in many general electrodeposition processes.

Sub-15 nm Au nanoparticles have been fabricated on a nanostructured Ag surface at room temperature via a liquid-phase chemical deposition upon excitation of the localized surface plasmon resonance (SPR). Measurement of the SPR-mediated photothermal local heating of the substrate surface by a molecular thermometry strategy indicated the temperature to be above 230 °C, which led to an efficient decomposition of CH(3)AuPPh(3) to form Au nanoparticles on the Ag surface. Particle sizes were tunable between 3 and 10 nm by adjusting the deposition time. A surface-limited growth model for Au nanoparticles on Ag is consistent with the deposition kinetics.

Aqueous Fe(II) reacts with Fe(III) oxides by coupled electron transfer and atom exchange (ETAE) resulting in mineral recrystallization, contaminant reduction, and trace element cycling. Previous studies of Fe(II)-Fe(III) ETAE have explored the reactivity of either pure iron oxide phases or those containing small quantities of soluble trace elements. Naturally occurring iron oxides, however, contain substantial quantities of insoluble impurities (e.g., Al) which are known to affect the chemical properties of such minerals. Here we explore the effect of Al(III), Cr(III), and Sn(IV) substitution (1-8 mol %) on trace element release from Ni(II)-substituted goethite and Zn(II)-substituted hematite during reaction with aqueous Fe(II). Fe(II)-activated trace element release is substantially inhibited from both minerals when an insoluble element is cosubstituted into the structure, and the total amount of release decreases exponentially with increasing cosubstituent. The limited changes in surface composition that occur following reaction with Fe(II) indicate that Al, Cr, and Sn do not exsolve from the structure and that Ni and Zn released to solution originate primarily from the bulk rather than the particle exterior (upper ~3 nm). Incorporation of Al into goethite substantially decreases the amount of iron atom exchange with aqueous Fe(II) and, consequently, the amount of Ni release from the structure. This implies that trace element release inhibition caused by substituting insoluble elements results from a decrease in the amount of mineral recrystallization. These results suggest that naturally occurring iron oxides containing insoluble elements are less susceptible to Fe(II)-activated recrystallization and exhibit a greater retention of trace elements and contaminants than pure mineral phases.

The understanding of the atomic-scale structural and chemical ordering in supported nanosized alloy particles is fundamental for achieving active catalysts by design. This report shows how such knowledge can be obtained by a combination of techniques including X-ray photoelectron spectroscopy and synchrotron radiation based X-ray fine structure absorption spectroscopy and high-energy X-ray diffraction coupled to atomic pair distribution function analysis, and how the support-nanoalloy interaction influences the catalytic activity of ternary nanoalloy (platinum-nickel-cobalt) particles on three different supports: carbon, silica, and titania. The reaction of carbon monoxide with oxygen is employed as a probe to the catalytic activity. The thermochemical processing of this ternary composition, in combination with the different support materials, is demonstrated to be capable of fine-tuning the catalytic activity and stability. The support-nanoalloy interaction is shown to influence structural and chemical ordering in the nanoparticles, leading to support-tunable active sites on the nanoalloys for oxygen activation in the catalytic oxidation of carbon monoxide. A nickel/cobalt-tuned catalytic site on the surface of nanoalloy is revealed for oxygen activation, which differs from the traditional oxygen-activation sites known for oxide-supported noble metal catalysts. The discovery of such support-nanoalloy interaction-enabled oxygen-activation sites introduces a very promising strategy for designing active catalysts in heterogeneous catalysis.

U(VI) doped hematite was synthesized and exposed to two different organic reductants with E(0) of 0.23 and 0.70 V. A combination of HAADF-TEM and EXAFS provided evidence that uranium was incorporated in hematite in uranate, likely octahedral coordination. XPS indicated that structurally incorporated U(VI) was reduced to U(V), whereas non-incorporated U(VI) was reduced to U(IV). Specifically, the experiments indicate that U(V) was the dominant oxidation state of uranium in hematite around Eh -0.24 to -0.28 V and pH 7.7-8.6 for at least up to 5 weeks of reaction time. U(V), but not U(IV), was also detected in hematite at Eh +0.21 V (pH 7.1-7.3). The results support the hypothesis, based on previous experimental and theoretical work, that the stability field of U(V) is widened relative to U(IV) and U(VI) in uranate coordination environments where the coordination number of U is less than 8.

The oxidation state switching of cerium in cerium oxide nanoparticles is studied in detail. The influence of synthesis medium, aging time and local environment on the oxidation state switching, between +3 and + 4, is analyzed by tracking the absorption edge using UV-Visible spectroscopy. It is observed that by tuning the local environment, the chemistry of the nanoparticles could be altered. These time dependent, environmentally induced changes likely contribute to inconsistencies in the literature regarding quantum-confinement effects for ceria nanoparticles. The results in this article indicate that there is a need to carry out comprehensive analysis of nanoparticles while considering the influence of synthesis and processing conditions, aging time and local environment.

A novel vulcanized polyaniline nanotube/sulfur composite was prepared successfully via an in situ vulcanization process by heating a mixture of polyaniline nanotube and sulfur at 280 °C. The electrode could retain a discharge capacity of 837 mAh g(-1) after 100 cycles at a 0.1 C rate and manifested 76% capacity retention up to 500 cycles at a 1 C rate., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Nanocrystalline WO(3) thin films were produced by sputter-deposition by varying the ratio of argon to oxygen in the reactive gas mixture during deposition. The surface chemistry, physical characteristics, and optical properties of nanocrystalline WO(3) films were evaluated using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray reflectivity (XRR), and spectrophotometric measurements. The effect of ultramicrostructure was significant on the optical properties of WO(3) films. The XPS analyses indicate the formation of stoichiometric WO(3) with tungsten existing in fully oxidized valence state (W(6+)). However, WO(3) films grown at high oxygen concentration (>60%) in the sputtering gas mixture were over stoichiometric with excess oxygen. XRR simulations based on isotropic WO(3) film-SiO(2) interface-Si substrate modeling indicate that the density of WO(3) films is sensitive to the oxygen content in the sputtering gas. The spectral transmission of the films increased with increasing oxygen. The band gap of these films increases from 2.78 to 3.25 eV with increasing oxygen. A direct correlation between the film density and band gap in nanocrystalline WO(3) films is established on the basis of the observed results., (© 2012 American Chemical Society)

The effect of zinc promotion on the oxidation state of cobalt in Co/ZrO(2) catalysts was investigated and correlated with the activity and selectivity for ethanol steam reforming (ESR). Catalysts were synthesized by applying incipient wetness impregnation and characterized by using Brunauer-Emmett-Teller (BET), temperature-programmed reduction (TPR) measurements, X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Higher ethanol conversion and lower CH(4) selectivity are observed for the Co/ZrO(2) catalyst promoted with Zn as compared to the Co/ZrO(2) catalyst alone. Addition of Zn inhibits the oxidation of metallic cobalt (Co(0) ) particles and results in a higher ratio of Co(0) /Co(2+) in the Zn-promoted Co/ZrO(2) catalyst. These results suggest that metallic cobalt (Co(0) ) is more active than Co(2+) in the ethanol conversion through dehydrogenation and that Co(2+) may play a role in the CH(4) formation. TPR measurements, on the other hand, reveal that Zn addition inhibits the reduction of Co(2+) and Co(3+) , which would lead to the false conclusion that oxidized Co is required to reduce the CH(4) formation. Therefore, TPR measurements may not be appropriate to correlate the degree of metal reducibility (in this case Co(0)) with the catalyst activity for reactions, such as ESR, where oxidizing conditions exist., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Most metallic nanoparticles exposed to air at room temperature will be instantaneously oxidized and covered by an oxide layer. In most cases the true structural nature of the oxide layer formed at this stage is hard to determine. As shown previously for Fe and other nanoparticles, the nature of the oxides form on the particles can vary with particle size and nature of the oxidation process. In this paper, we report the morphology and structural features of the native oxide layer on pure Ni and Cr-doped Ni nanoparticles synthesized using a cluster deposition process. Structural characterization carried out at the atomic level using aberration corrected high resolution transmission electron microscopy (HRTEM) in combination with electron and X-ray diffractions reveals that both pure Ni and Cr-doped Ni particles exposed to air at room temperature similarly possesses a core-shell structure of metal core covered by an oxide layer of typically 1.6 nm in thickness. There exists a critical size of approximately 6 nm, below which the particle is fully oxidized. The oxide particle corresponds to the rock-salt structured NiO and is faceted on the (001) planes. XPS of O-1s shows a strong peak that is attributed to (OH)-, which in combination with the atomic level HRTEM imaging indicates that the very top layer of the oxide is hydrolyzed.

This Article describes findings of the correlation between the atomic scale structure and the electrocatalytic performance of nanoengineered PtNiFe/C catalysts treated at different temperatures for oxygen reduction reaction, aiming at providing a new fundamental insight into the role of the detailed atomic alloying and interaction structures of the catalysts in fuel cell reactions. Both mass and specific activities of the catalysts were determined using rotating disk electrode and proton exchange membrane fuel cell. The mass activities extracted from the kinetic regions in both measurements revealed a consistent trend of decreasing activity with increasing temperature. However, the specific activity data from RDE revealed an opposite trend, that is, increasing activity with increasing temperature. In addition to TEM, XRD, and XPS characterizations, a detailed XAFS analysis of the atomic scale coordination structures was carried out, revealing increased heteroatomic coordination with improved alloying structures for the catalyst treated at the elevated temperatures. XPS analysis has further revealed a reduced surface concentration of Pt for the catalyst for the high temperature treated catalyst. The higher mass activity for the lower temperature treated catalyst is due to Pt surface enrichment on the surface sites, whereas the higher specific activity for the higher temperature treated catalyst reflects an enhanced Pt-alloying surface sites. These findings have thus provided a new insight for assessing the structural correlation of the electrocatalytic activity with the fcc-type lattice change and the atomic scale alloying characteristics. Implications of these findings to the design of highly active alloy electrocatalysts are discussed, along with their enhanced electrocatalytic performance in the fuel cell.

Here we report that poly(diallyldimethylammonium chloride) (PDDA) acts as both a reducing agent and a stabilizer to prepare soluble graphene nanosheets from graphite oxide. The results of transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscopy, and Fourier transform infrared indicated that graphite oxide was successfully reduced to graphene nanosheets which exhibited single-layer structure and high dispersion in various solvents. The reaction mechanism for PDDA-induced reduction of exfoliated graphite oxide was proposed. Furthermore, PDDA facilitated the in situ growth of highly dispersed Pt nanoparticles on the surface of graphene nanosheets to form Pt/graphene nanocomposites, which exhibited excellent catalytic activity toward formic acid oxidation. This work presents a facile and environmentally friendly approach to the synthesis of graphene nanosheets and opens up a new possibility for preparing graphene and graphene-based nanomaterials for large-scale applications.

P53 phosphorylation plays an important role in many biological processes and might be used as a potential biomarker in clinical diagnoses. We report a new electrochemical immunosensor for ultrasensitive detection of phosphorylated p53 at Ser392 (phospho-p53(392)) based on graphene oxide (GO) as a nanocarrier in a multienzyme amplification strategy. Greatly enhanced sensitivity was achieved by using the bioconjugates featuring horseradish peroxidase (HRP) and p53(392) signal antibody (p53(392)Ab(2)) linked to functionalized GO (HRP-p53(392)Ab(2)-GO) at a high ratio of HRP/p53(392)Ab(2). After a sandwich immunoreaction, the HRP-p53(392)Ab(2)-GO captured onto the electrode surface produced an amplified electrocatalytic response by the reduction of enzymatically oxidized thionine in the presence of hydrogen peroxide. The increase of response current was proportional to the phospho-p53(392) concentration in the range of 0.02-2 nM with the detection limit of 0.01 nM, which was 10-fold lower than that of the traditional sandwich electrochemical measurement for p53(392). The amplified immunoassay developed in this work shows acceptable stability and reproducibility, and the assay results for phospho-p53(392) spiked in human plasma also show good recovery (92-103.8%). This simple and low-cost immunosensor shows great promise for detection of other phosphorylated proteins and clinical applications.

We report a novel core-shell-structured ternary nanocube of MnZn ferrite synthesized by controlling the reaction temperature and composition in the absence of conventionally used reducing agents. The highly monodispersed core-shell structure consists of an Fe(3)O(4) core and an MnZn Ferrite shell. The observation of a Moiré pattern indicates that the core and the shell are two highly crystalline materials with slightly different lattice constants that are rotated relative to each other by a small angle. The ternary core-shell nanocubes display magnetic properties regulated by a combination of the core-shell composition and exhibit an increased coercivity and field-cooled/zero-field-cooled characteristics drastically different from those of regular MnZn ferrite nanoparticles. The ability to engineer the spatial nanostructures of ternary magnetic nanoparticles in terms of shape and composition offers atomic-level versatility in fine-tuning the nanoscale magnetic properties.

This report demonstrates a novel strategy of chromium-assisted synthesis of platinum nanocubes as electrocatalysts for oxygen reduction reaction with enhanced specific activity.

Extracellular polymeric substances (EPS) secreted by suspended cultures of microorganisms from an activated sludge plant in the presence of glucose were characterized in detail using colorimetry, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy. EPS produced by the multi-species community were similar to literature reports of pure cultures in terms of functionalities with respect to C and O but differed subtly in terms of N and P. Hence, it appears that EPS produced by different microorganisms maybe homologous in major chemical constituents but may differ in minor components such as lipids and phosphodiesters. The role of specific EPS constituents on microbial aggregation was also determined. The weak tendency of microorganisms to bioflocculate during the exponential growth phase was attributed to electrostatic repulsion when EPS concentration was low and acidic in nature (higher fraction of uronic acids to total EPS) as well as reduced polymer bridging. However, during the stationary phase, polymeric interactions overwhelmed electrostatic interactions (lower fraction of uronic acids to total EPS) resulting in improved bioflocculation. More specifically, microorganisms appeared to aggregate in the presence of protein secondary structures including aggregated strands, beta-sheets, alpha- and 3-turn helical structures. Bioflocculation was also favored by increasing O-acetylated carbohydrates and overall C-(O,N) and O=C-OH+O=C-OR functionalities., ((c) 2010 Elsevier Ltd. All rights reserved.)

We describe the synthesis and characterization of high-performance, superparamagnetic, iron oxide nanoparticle-based, heavy metal sorbents, which demonstrate excellent affinity for the separation of heavy metals in contaminated water systems (i.e., spiked Columbia River water). The magnetic nanoparticle sorbents were prepared from an easy-to-synthesize iron oxide precursor, followed by a simple, one-step ligand exchange reaction to introduce an affinity ligand to the nanoparticle surface that is specific to a heavy metal or class of heavy metal contaminants. The engineered magnetic nanoparticle sorbents have inherently high active surface areas, allowing for increased binding capacities. To demonstrate the performance of the nanoparticle sorbents, river water was spiked with specific metals and exposed to low concentrations of the functionalized nanoparticles. In almost all cases, the nanoparticles were found to be superior to commercially available sorbent materials as well as the unfunctionalized iron oxide nanoparticles.

A novel electrochemical immunosensor for sensitive detection of cancer biomarker alpha-fetoprotein (AFP) is described that uses a graphene sheet sensor platform and functionalized carbon nanospheres (CNSs) labeled with horseradish peroxidase-secondary antibodies (HRP-Ab2). Greatly enhanced sensitivity for the cancer biomarker is based on a dual signal amplification strategy: first, the synthesized CNSs yielded a homogeneous and narrow size distribution, which allowed several binding events of HRP-Ab2 on each nanosphere. Enhanced sensitivity was achieved by introducing the multibioconjugates of HRP-Ab2-CNSs onto the electrode surface through "sandwich" immunoreactions. Second, functionalized graphene sheets used for the biosensor platform increased the surface area to capture a large amount of primary antibodies (Ab1), thus amplifying the detection response. On the basis of the dual signal amplification strategy of graphene sheets and the multienzyme labeling, the developed immunosensor showed a 7-fold increase in detection signal compared to the immunosensor without graphene modification and CNSs labeling. The proposed method could respond to 0.02 ng mL(-1) AFP with a linear calibration range from 0.05 to 6 ng mL(-1). This amplification strategy is a promising platform for clinical screening of cancer biomarkers and point-of-care diagnostics.

We present the results of a detailed operando XAFS and density functional theory (DFT)-based ab initio molecular dynamics (AIMD) investigation of a proposed mechanism of the dehydrogenation of dimethylaminoborane (DMAB) by a homogeneous Rh(4) cluster catalyst. Our AIMD simulations reveal that previously proposed Rh structures, based on XAFS measurements, are highly fluxional, exhibiting both metal cluster and ligand isomerizations and dissociation that can only be accounted for by examining a finite temperature ensemble. It is found that a fluxional species Rh(4)(H(2)BNMe(2))(8)(2+) is fully compatible with operando XAFS measurements, suggesting that this species may be the observed catalyst resting state. On the basis of this assignment, we propose a mechanism for catalytic DMAB dehydrogenation that exhibits an energy barrier of approximately 28 kcal/mol.

An iron (Fe) nanoparticle exposed to air at room temperature will be instantly covered by an oxide shell that is typically approximately 3 nm thick. The nature of this native oxide shell, in combination with the underlying Fe(0) core, determines the physical and chemical behavior of the core-shell nanoparticle. One of the challenges of characterizing core-shell nanoparticles is determining the structure of the oxide shell, that is, whether it is FeO, Fe(3)O(4), gamma-Fe(2)O(3), alpha-Fe(2)O(3), or something else. The results of prior characterization efforts, which have mostly used X-ray diffraction and spectroscopy, electron diffraction, and transmission electron microscopic imaging, have been framed in terms of one of the known Fe-oxide structures, although it is not necessarily true that the thin layer of Fe oxide is a known Fe oxide. In this Article, we probe the structure of the oxide shell on Fe nanoparticles using electron energy loss spectroscopy (EELS) at the oxygen (O) K-edge with a spatial resolution of several nanometers (i.e., less than that of an individual particle). We studied two types of representative particles: small particles that are fully oxidized (no Fe(0) core) and larger core-shell particles that possess an Fe core. We found that O K-edge spectra collected for the oxide shell in nanoparticles show distinct differences from those of known Fe oxides. Typically, the prepeak of the spectra collected on both the core-shell and the fully oxidized particles is weaker than that collected on standard Fe(3)O(4). Given the fact that the origin of this prepeak corresponds to the transition of the O 1s electron to the unoccupied state of O 2p hybridized with Fe 3d, a weak pre-edge peak indicates a combination of the following four factors: a higher degree of occupancy of the Fe 3d orbital; a longer Fe-O bond length; a decreased covalency of the Fe-O bond; and a measure of cation vacancies. These results suggest that the coordination configuration in the oxide shell on Fe nanoparticles is defective as compared to that of their bulk counterparts. Implications of these defective structural characteristics on the properties of core-shell structured iron nanoparticles are discussed.

Amelogenin is a unique protein that self-assembles into spherical aggregates called "nanospheres" and is believed to be involved in controlling the formation of the highly anisotropic and ordered hydroxyapatite crystallites that form enamel. The adsorption behavior of amelogenin onto substrates is of great interest because protein-surface interactions are critical to its function. We report studies of the adsorption of amelogenin onto self-assembled monolayers containing COOH end group functionality as well as single crystal fluoroapatite, a biologically relevant surface. We found that although our solutions contained only nanospheres of narrow size distribution, smaller structures such as dimers or trimers were observed on the hydrophilic surfaces. This suggests that amelogenin can adsorb onto surfaces as small structures that "shed" or disassemble from the nanospheres that are present in solution., (2008 Wiley Periodicals, Inc.)

The ability to regulate how molecular chirality of enantiomeric amino acids operates in biological systems constitutes the basis of drug design for specific targeting. We report herein a nanoparticle-based strategy to regulate interparticle chiral recognition of enantiomers using enantiomeric cysteines (l and d) and gold nanoparticles as a model system. A key element of this strategy is the creation of a nanoscale environment either favoring or not favoring the preferential configuration of the pairwise zwitterionic dimerization of the enantiomeric cysteines adsorbed on gold nanoparticles as a footprint for interparticle chiral recognition. This recognition leads to interparticle assembly of the nanoparticles which is determined by the change in the nanoparticle surface plasmonic resonance. While the surface density and functionality of cysteines on gold nanoparticles are independent of chirality, the interparticle chiral recognition is evidenced by the sharp contrast between the interparticle homochiral and heterochiral assembly rates based on a first-order kinetic model. The structural properties for the homochiral and heterochiral assemblies of nanoparticles depend on the particle size, the cysteine chirality, and other interparticle binding conditions. The structural and thermodynamic differences between the homochiral and heterochiral interactions for the interparticle assemblies of nanoparticles were not only substantiated by spectroscopic characterizations of the adsorbed cysteine species but also supported by structures and enthalpies obtained from preliminary density functional theory calculations. The experimental-theoretical correlation between the interparticle reactivity and the enantiomeric ratio reveals that the chiral recognition is tunable by the nanoscale environment, which is a key feature of the nanoparticle-regulation strategy for the interparticle chiral recognition.

Fluorescein isothiocyanate (FITC)-encapsulated SiO(2) core-shell particles with a nanoscale ZnO finishing layer have been synthesized for the first time as multifunctional "smart" nanostructures. Detailed characterization studies confirmed the formation of an outer ZnO layer on the SiO(2)-FITC core. These approximately 200 nm sized particles showed promise toward cell imaging and cellular uptake studies using the bacterium Escherichia coli and Jurkat cancer cells, respectively. The FITC encapsulated ZnO particles demonstrated excellent selectivity in preferentially killing Jurkat cancer cells with minimal toxicity to normal primary immune cells (18% and 75% viability remaining, respectively, after exposure to 60 microg/ml) and inhibited the growth of both gram-positive and gram-negative bacteria at concentrations > or =250-500 microg/ml (for Staphylococcus aureus and Escherichia coli, respectively). These results indicate that the novel FITC encapsulated multifunctional particles with nanoscale ZnO surface layer can be used as smart nanostructures for particle tracking, cell imaging, antibacterial treatments and cancer therapy.

Free and bound (or capsular) EPS produced by suspended cultures of Escherichia coli and Serratia marcescens were characterized in detail using colorimetric analysis of total proteins and polysaccharides, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and Auger electron spectroscopy (AES) in the presence and absence of bismuth-based antifouling agents. Subtle differences in the chemical composition of free and bound EPS were observed for both bacteria in the absence of bismuth. Total polysaccharides and proteins in free and bound EPS decreased upon treatment with subinhibitory concentrations of lipophilic bismuth thiols (bismuth dimercaptopropanol, BisBAL; bismuth ethanedithiol, BisEDT; and bismuth pyrithione, BisPYR), with BisBAL being most effective. Bismuth thiols also influenced acetylation and carboxylation of polysaccharides in EPS from S. marcescens. Extensive homology between EPS samples in the presence and absence of bismuth was observed with proteins, polysaccharides, and nucleic acids varying predominantly only in the total amount produced. Second derivative analysis of the amide I region of FTIR spectra revealed decreases in protein secondary structures in the presence of bismuth thiols. Hence, antifouling properties of bismuth thiols appear to originate in their ability to suppress O-acetylation and protein secondary structure formation in addition to free and bound EPS secretion.

There are many circumstances in science where the process of measuring the properties of a system alters the system. An imaging process can exert an inadvertent effect on the object being observed. Consequently, what we observe does not necessarily represent what had been present before the observation. Normally, this effect can be ignored if the consequence of such a change is believed not to be significant. The expansion of nanostructured materials has made high-resolution transmission electron microscopy one of the indispensable tools for probing the characteristics of nanomaterials. Modification of nanoparticles by the electron beam during their imaging has been widely noticed and this is generally believed to be due to electron beam-induced heating effect, defect formation in the particles, charging of the particle, or excitation of surrounding gases. However, an explicit experimental identification of which process dominates is often very hard to establish. We report the thickening of native oxide layer on iron nanoparticle under electron beam irradiation. Based on atomic level imaging, electron diffraction, and computer simulation, we have direct evidence that the protecting oxide layer formed on Fe nanoparticle at room temperature in air or oxygen continues to grow during an electron beam bombardment in the vacuum system typical of most TEM systems. Typically, the oxide layer increases from approximately 3 to approximately 6 nm following approximately 1h electron beam exposure typically with an electron flux of 7 x 10(5)nm(-2)s(-1) and an vacuum of approximately 3 x 10(-5)Pa. Partial illumination of a nanoparticle and observation of the shell thickening conclusively demonstrates that many of the mechanisms postulated to explain such processes are not occurring to a significant extent. The observed growth is not related to the electron beam-induced heating of the nanoparticle, or residual oxygen ionization, or establishment of an electrical field, rather it is related to electron beam-facilitated mass transport across the oxide layer (a defect-related process). The growth follows a parabolic growth law.

We report the results of a detailed investigation of sol-gel-synthesized nanoscale Zn(1-x)Co(x)O powders processed at 350 °C with 0≤x≤0.12 to understand how the structural, morphological, optical and magnetic properties of ZnO are modified by Co doping, in addition to searching for the theoretically predicted ferromagnetism. With x increasing to 0.03, both lattice parameters a and c of the hexagonal ZnO decreased, suggesting substitutional doping of Co at the tetrahedral Zn(2+) sites. For x>0.03, these trends reversed and the lattice showed a gradual expansion as x approached 0.12, probably due to additional interstitial incorporation of Co. Raman spectroscopy measurements showed a rapid change in the ZnO peak positions for x>0.03, suggesting significant disorder and changes in the ZnO structure, in support of additional interstitial Co doping possibility. Combined x-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance spectroscopy, photoluminescence spectroscopy and diffuse reflectance spectroscopy showed clear evidence for tetrahedrally coordinated high-spin Co(2+) ions occupying the lattice sites of ZnO host system, which became saturated for x>0.03. Magnetic measurements showed a paramagnetic behaviour in Zn(1-x)Co(x)O with increasing antiferromagnetic interactions as x increased to 0.10. Surprisingly, a weak ferromagnetic behaviour was observed for the sample with x = 0.12 with a characteristic hysteresis loop showing a coercivity H(c)∼350 Oe, 25% remanence M(r), a low saturation magnetization M(s)∼0.04 emu g(-1) and with a Curie temperature T(c)∼540 K. The XPS data collected from Zn(1-x)Co(x)O samples showed a gradual increase in the oxygen concentration, changing the oxygen-deficient undoped ZnO to an excess oxygen state for x = 0.12. This indicates that such high Co concentrations and appropriate oxygen stoichiometry may be needed to achieve adequate ferromagnetic exchange coupling between the incorporated Co(2+) ions.

Surface and interface properties are important in controlling the yield and efficiency of the photochemically initiated immobilization. Using a silane-functionalized perfluorophenyl azide (PFPA-silane) as the photoactive cross-linker, the immobilization of polymers was studied by adjusting the density of the surface azido groups. Dilution of the photolinker resulted in a gradual decrease in the density of surface azido groups as well as the thickness of the immobilized film. When a nonphotoactive silane was added to PFPA-silane, the film thickness decreased more rapidly, suggesting that the additive competed with PFPA-silane and effectively reduced the density of the surface azido groups. The effect of surface topography was studied by adding a nonphotoactive silane with either a shorter (n-propyltrimethoxysilane (PTMS)) or a longer spacer (n-octadecyltrimethoxysilane (ODTMS)). In most cases the long chain ODTMS shielded the surface azido groups, resulting in a more rapid decrease in film thickness as compared to PTMS treated under the same conditions. As the density of the surface azido groups decreased, the immobilized polymer changed from smooth films to patched structures and, eventually, single polymer molecules.

A novel electrochemical immunosensor for the detection of tumor necrosis factor-alpha (TNF-alpha) based on poly(guanine)-functionalized silica nanoparticles (NPs) label is presented. The detection of mouse TNF-alpha via immunological reaction is based on a dual signal amplification: (1) a large amount of guanine residues introduced on the electrode surface through sandwich immunoreaction and poly(guanine)-functionalized silica NP label; (2) Ru(bpy)3(2+)-induced catalytic oxidation of guanine, which results in great enhancement of anodic current. The synthesized silica NP conjugates were characterized with atomic force microscopy, X-ray photoelectron spectroscopy, and electrochemistry. These experiments confirmed that poly(guanine) and avidin were immobilized on the surface of silica NPs. The performance of the electrochemical immunosensor was evaluated and some experiment parameters (e.g., concentration of Ru(bpy)3(2+), incubation time of TNF-alpha, etc.) were optimized. The detection limit for TNF-alpha is found to be 5.0 x 10(-11) g mL(-1) (2.0 pM), which corresponds to 60 amol of TNF-alpha in 30 microL of sample. This immunosensor based on the poly(guanine)-functionalized silica NP label offers great promise for rapid, simple, cost-effective analysis of biological samples.

In this study, polypyrrole (PPy) thin films were electrodeposited on carbon nanotube (CNT) backbones by applying a constant deposition potential in 0.1 M pyrrole solution with different electrolytes, such as NaCl, NaNO3, or NaClO4. The hybrid films were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy, and cyclic voltammetry. SEM images revealed the nanostructrure of PPy films generated on CNT surface. The electrochemical and anion exchange properties of the PPy-CNT composite films have been investigated. Nanostructured composite thin films of PPy-CNTs were studied by cyclic voltammetry between 0.4 and -0.8 V in aqueous solution to evaluate their cycling stability and capacity for electrically switched anion exchange. The presence of the CNT backbone greatly improved the anion exchange capacity and stability of the PPy-CNT composite film, which may be attributed to the high surface area of CNT matrix, nanostructure of the PPy film, and the interaction between CNTs and PPy.

TiO2- and gamma-Al2O3-supported Pt catalysts were characterized by HRTEM, XPS, EXAFS, and in situ FTIR spectroscopy after activation at various conditions, and their catalytic properties were examined for the oxidation of CO in the absence and presence of H2 (PROX). When gamma-Al2O3 was used as the support, the catalytic, electronic, and structural properties of the Pt particles formed were not affected substantially by the pretreatment conditions. In contrast, the surface properties and catalytic activity of Pt/TiO2 were strongly influenced by the pretreatment conditions. In this case, an increase in the reduction temperature led to higher electron density on Pt, altering its chemisorptive properties, weakening the Pt-CO bonds, and increasing its activity for the oxidation of CO. The in situ FTIR data suggest that both the terminal and bridging CO species adsorbed on fully reduced Pt are active for this reaction. The high activity of Pt/TiO2 for the oxidation of CO can also be attributed to the ability of TiO2 to provide or stabilize highly reactive oxygen species at the metal-support interface. However, such species appear to be more reactive toward H2 than CO. Consequently, Pt/TiO2 shows substantially lower selectivities toward CO oxidation under PROX conditions than Pt/gamma-Al2O3.

The ability to synthesize and assemble monodispersed core-shell nanoparticles is important for exploring the unique properties of nanoscale core, shell, or their combinations in technological applications. This paper describes findings of an investigation of the synthesis and assembly of core (Fe(3)O(4))-shell (Au) nanoparticles with high monodispersity. Fe(3)O(4) nanoparticles of selected sizes were used as seeding materials for the reduction of gold precursors to produce gold-coated Fe(3)O(4) nanoparticles (Fe(3)O(4)@Au). Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, core-shell composition, surface reactivity, and magnetic properties have confirmed the formation of the core-shell nanostructure. The interfacial reactivity of a combination of ligand-exchanging and interparticle cross-linking was exploited for molecularly mediated thin film assembly of the core-shell nanoparticles. The SQUID data reveal a decrease in magnetization and blocking temperature and an increase in coercivity for Fe(3)O(4)@Au, reflecting the decreased coupling of the magnetic moments as a result of the increased interparticle spacing by both gold and capping shells. Implications of the findings to the design of interfacial reactivities via core-shell nanocomposites for magnetic, catalytic, and biological applications are also briefly discussed.

The adsorption and reaction of CO and CO(2) on oxidized and reduced SrTiO(3)(100) surfaces have been studied with temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). XPS results indicate that the oxidized SrTiO(3)(100) surfaces are nearly defect-free with predominantly Ti(4+) ions whereas the sputter-reduced surfaces contain substantial amounts of defects. Both CO and CO(2) are found to adsorb weakly on the oxidized SrTiO(3)(100) surfaces. On sputter-reduced surfaces, enhanced reactivity of CO and CO(2) is observed due to the presence of oxygen vacancy sites, which are responsible for dissociative adsorption of these molecules. Our studies indicate that the CO and CO(2) molecules exhibit relatively weaker interactions with SrTiO(3)(100) compared to those with TiO(2)(110) and TiO(2)(100) surfaces. This is most likely an influence of the Sr cations on the electronic structure of the Ti cations in the mixed oxide of SrTiO(3).

The adsorption and reaction of methanol (CH(3)OH) on stoichiometric (TiO(2)-terminated) and reduced SrTiO(3)(100) surfaces have been investigated using temperature-programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and first-principles density-functional calculations. Methanol adsorbs mostly nondissociatively on the stoichiometric SrTiO(3)(100) surface that contains predominately Ti(4+) cations. Desorption of a monolayer methanol from the stoichiometric surface is observed at approximately 250 K, whereas desorption of a multilayer methanol is found to occur at approximately 140 K. Theoretical calculations predict weak adsorption of methanol on TiO(2)-terminated SrTiO(3)(100) surfaces, in agreement with the experimental results. However, the reduced SrTiO(3)(100) surface containing Ti(3+) cations exhibits higher reactivity toward adsorbed methanol, and H(2), CH(4), and CO are the major decomposition products. The surface defects on the reduced SrTiO(3)(100) surface are partially reoxidized upon saturation exposure of CH(3)OH onto this surface at 300 K.

This paper reports findings of an investigation of the synthesis of monolayer-capped binary gold-silver (AuAg) bimetallic nanoparticles that is aimed at understanding the control factors governing the formation of the bimetallic compositions. The synthesis of alkanethiolate-capped AuAg nanoparticles was carried out using two related synthetic protocols using aqueous sodium borohydride as a reducing agent. One involves a two-phase reduction of AuCl(4)(-), which is dissolved in organic solution, and Ag(+), which is dissolved in aqueous solution. The other protocol involves a two-phase reduction of AuCl(4)(-) and AgBr(2)(-), both of which are dissolved in the same organic solution. AuAg nanoparticles of 2-3 nm core sizes with different compositions in the range of 0-100% Au have been synthesized. The two synthetic routes were compared in terms of bimetallic composition and size properties. Our new findings have allowed us to establish the correlation between synthetic feeding of metals and metal compositions in the bimetallic nanoparticles, which have important implications to the exploration of gold-based bimetallic nanoparticles for constructing sensing and catalytic nanomaterials.

The reaction of hematite with quinones and the quinone moieties of larger molecules may be an important factor in limiting the rate of reductive dissolution, especially by iron-reducing bacteria. Here, the electrochemical and physical properties of hydroquinone adsorbed on hematite surfaces at pH 2.5-3 were investigated with cyclic voltammetry (CV), electrochemical-scanning tunneling microscopy (EC-STM), and X-ray photoelectron spectroscopy (XPS). An oxidation peak for hydroquinone was observed in the CV experiments, as well as (photo)reduction of iron and decomposition of the solvent. The EC-STM results indicate that hydroquinone sometimes forms an ordered monolayer with approximately 1.1 QH(2)/nm(2), but can be fairly disordered (especially when viewed at larger scales). XPS results indicate that hydroquinone and benzoquinone are retained at the interface in increasing amounts as the reaction proceeds, but reduced iron is not observed. These results suggest that quinones do not adsorb by an inner-sphere complex where adsorbate-surface interactions determine the adsorbate surface structure, but rather in an outer-sphere complex where interactions among the adsorbate molecules dominate.