Search

Power-to-X concepts promise a reduction of greenhouse gas emissions simultaneously guaranteeing a safe energy supply even at high share of renewable power generation, thus becoming a cornerstone of a sustainable energy system. Power-to-syngas, that is, the electrochemical conversion of steam and carbon dioxide with the use of renewably generated electricity to syngas for the production of synfuels and high-value chemicals, offers an efficient technology to couple different energy-intense sectors, such as "traffic and transportation" and "chemical industry". Syngas produced by co-electrolysis can thus be regarded as a key-enabling step for a transition of the energy system, which offers additionally features of CO 2 -valorization and closed carbon cycles. Here, we discuss advantages and current limitations of low- and high-temperature co-electrolysis. Advances in both fundamental understanding of the basic reaction schemes and stable high-performance materials are essential to further promote co-electrolysis., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Aprotic lithium-oxygen (Li-O2 ) batteries have attracted considerable attention in recent years owing to their outstanding theoretical energy density. A major challenge is their poor reversibility caused by degradation reactions, which mainly occur during battery charge and are still poorly understood. Herein, we show that singlet oxygen ((1) Δg ) is formed upon Li2 O2 oxidation at potentials above 3.5 V. Singlet oxygen was detected through a reaction with a spin trap to form a stable radical that was observed by time- and voltage-resolved in operando EPR spectroscopy in a purpose-built spectroelectrochemical cell. According to our estimate, a lower limit of approximately 0.5 % of the evolved oxygen is singlet oxygen. The occurrence of highly reactive singlet oxygen might be the long-overlooked missing link in the understanding of the electrolyte degradation and carbon corrosion reactions that occur during the charging of Li-O2 cells., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The defect structure for copper-doped sodium potassium niobate (KNN) ferroelectrics has been analyzed with respect to its defect structure. In particular, the interplay between the mutually compensating dimeric (Cu(Nb)'''-V(O)··) and trimeric (V(O)··-Cu(Nb)'''-V(O)··)· defect complexes with 180° and non-180° domain walls has been analyzed and compared to the effects from (Cu'' - V(O)··)(x)× dipoles in CuO-doped lead zirconate titanate (PZT). Attempts are made to relate the rearrangement of defect complexes to macroscopic electromechanical properties.

Silicon electrochemistry in fluorohydrogenate ionic liquids is partly hampered owing to the incapability of producing an accurate and reproducible potential measurement due to a lack of appropriate reference electrodes. This research work describes a simple assembly of a stable external reference electrode enabling accurate studies of silicon electrochemistry in fluorohydrogenate ionic liquids. The electrode configuration is based on the ferrocene/ferrocenium (Fc|Fc(+)) couple dissolved in the EMIm(HF)(2.3)F (1-ethyl-3-methyl-imidazolium fluorohydrogenate)/Carbopol 941 gel. A stable potential of 2.5 wt% Carbopol-based electrode was measured versus a calomel reference electrode at 250 ± 3 mV. By utilizing the constructed electrode, an intensive electrochemical investigation on n-type silicon in EMIm(HF)(2.3)F was conducted. Flat-band and open circuit potentials were measured, along with Si-air half- and full-cell electrochemical measurements. A suggested mechanism for the n-type Si dissolution process in the EMIm(HF)(2.3)F electrolyte, without illumination, is discussed as well.

The mechanism of discharge termination in silicon-air batteries, employing a silicon wafer anode, a room-temperature fluorohydrogenate ionic liquid electrolyte and an air cathode membrane, is investigated using a wide range of tools. EIS studies indicate that the interfacial impedance between the electrolyte and the silicon wafer increases upon continuous discharge. In addition, it is shown that the impedance of the air cathode-electrolyte interface is several orders of magnitude lower than that of the anode. Equivalent circuit fitting parameters indicate the difference in the anode-electrolyte interface characteristics for different types of silicon wafers. Evolution of porous silicon surfaces at the anode and their properties, by means of estimated circuit parameters, is also presented. Moreover, it is found that the silicon anode potential has the highest negative impact on the battery discharge voltage, while the air cathode potential is actually stable and invariable along the whole discharge period. The discharge capacity of the battery can be increased significantly by mechanically replacing the silicon anode.

The electrocatalytical process at the air cathode in novel silicon-air batteries using the room-temperature ionic liquid hydrophilic 1-ethyl-3-methylimidazolium oligofluorohydrogenate [EMI⋅2.3 HF⋅F] as electrolyte and highly doped silicon wafers as anodes is investigated by electrochemical means, X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) spectroscopy. The results obtained by XPS and EPR provide a model to describe the limited discharge capacity by means of a mechanism of air-electrode deactivation. In that respect, upon discharge the silicon-air battery's cathode is not only blocked by silicon oxide reduction products, but also experiences a major modification in the MnO₂ catalyst nature. The proposed modification of the MnO₂ catalyst by means of a MnF₂ surface layer greatly impacts the Si-air performance and describes a mechanism relevant for other metal-air batteries, such as the lithium-air. Moreover, the ability for this deactivation layer to form is greatly impacted by water in the electrolyte., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The fabrication of novel iron-doped barium strontium titanate thin films by means of radio frequency (RF) magnetron co-sputtering is shown. Investigations of the elemental composition and the dopant distribution in the thin films obtained by X-ray photoelectron spectroscopy, Rutherford backscattering spectrometry, and time-of-flight secondary ion mass spectroscopy reveal a homogeneous dopant concentration throughout the thin film. The incorporation of the iron dopant and the temperature-dependent evolution of the crystal structure and morphology are analyzed by electron paramagnetic resonance spectroscopy, X-ray diffraction, Raman spectroscopy, atomic force microscopy, and scanning electron microscopy. In summary, these results emphasize the RF magnetron co-sputter process as a versatile way to fabricate doped thin films.

The Mo(10-x)V(x)O(y) solid-solution systems (0≤x≤10) were studied by electron paramagnetic resonance spectroscopy. The results show the existence of paramagnetic vanadyl VO(2+) species, whose concentration becomes maximal for Mo(5)V(5)O(y·). A quantitative analysis of the [VO(2+)] concentration as a function of the Mo/V ratio allows it to characterize the prevailing defect chemistry in the Mo(10-x)V(x)O(y) system. In this respect, the semi-conducting properties of Mo(10-x)V(x)O(y) are p-type in an interval of Mo(9)V(1)O(y)-Mo(5)V(5)O(y) and switch into n-type because of the conduction electrons in a composition range of Mo(5)V(5)O(y)-Mo(1)V(9)O(y). Highest catalytic activity is obtained when vanadium acts as an acceptor center and oxygen vacancies ν(··)(O) are formed for reasons of charge compensation. In addition to the surface, ν(··)(O) and VO(2+) centers in the bulk have to be considered too for heterogeneous catalysis., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The local coordination of the Fe(3+)-centers in Li[Co(0.98)Fe(0.02)]O(2) cathode materials for lithium-ion batteries has been investigated by means of XRD and multi-frequency EPR spectroscopy. EPR clearly showed the Fe(3+) being in a high-spin state with S = 5/2. The set of spin-Hamiltonian parameters obtained from multi-frequency EPR experiments with Larmor frequencies ranging between 9.8 and 406 GHz was transformed into structural information by means of an expansion to standard Newton-superposition modeling, termed as Monte-Carlo Newman superposition modeling. Based on this analysis, an isovalent incorporation of the Fe(3+)-ions on the Co(3+)-sites, i.e. Fe(x)(Co), has been shown. With that respect, the positive sign of the axial second-order fine-structure interaction parameter B(0)(2) is indicative of an elongated oxygen octahedron, whereas B(0)(2) < 0 points to a compressed octahedron coordinated about the Fe(3+)-center. Furthermore, the results obtained here suggest that the oxygen octahedron about the Fe(3+)-ion is slightly distorted as compared to the CoO(6) octahedron, which in turn may impose mechanical strain to the cathode material., (This journal is © the Owner Societies 2011)

Multi-frequency and pulsed electron paramagnetic resonance (EPR) provides a sensitive spectroscopic tool to elucidate the defect structure of transition-metal doped perovskite oxides, as well as to monitor dynamic processes of oxygen vacancies in these materials. In this regard, high-frequency EPR spectrometers and pulsed EPR techniques such as the hyperfine sublevel correlation experiment (HYSCORE) may now routinely be used for dedicated investigations, providing considerably more insight than the application of standard continuous-wave EPR. Recent results include the formation of defect complexes between acceptor-type transition-metal centers with either one or two oxygen vacancies for the reason of charge compensation. Furthermore, such defect complexes follow the domain switching upon poling ferroelectric compounds with correspondingly high electric fields. On the other hand, multi-valent manganese functional centers provide trapping centers for electronic and ionic charge carriers (e', ) such that valency altered acceptor states or defect complexes are formed. Additionally, the trapping of charge carriers at the intrinsic 'reduced' B-site ions, and , can be observed by means of EPR spectroscopy.

The defect structure of Fe(3+)-, Cu(2+)-, Mn(4+)- and Gd(3+)-doped PbTiO(3) nano-powders has been studied by electron paramagnetic resonance (EPR) spectroscopy. Analogous to the situation for 'bulk' ferroelectrics, Fe(3+) and Cu(2+) act as acceptor-type functional centers that form defect complexes with charge-compensating oxygen vacancies. The corresponding defect dipoles are aligned along the direction of spontaneous polarization, P(S), and possess an additional defect polarization, P(D). Upon the transition to the nano-regime, the defect structure is modified such that orientations perpendicular to P(S), [Formula: see text] and [Formula: see text] also become realized. Moreover, the binding energy for the defect complexes is lowered such that instead 'free' Fe'(Ti) and V··(O)-centers are formed. As a consequence, the concentration of mobile V··(O) that enhances the ionic conductivity through drift diffusion is increased for the nano-powders. Finally, in the nano-regime the ferroelectric 'hardening' is expected to be considerably decreased as compared to the 'bulk' compounds. In contrast to the acceptor-type dopants, the donor-type Gd(3+) dopant is incorporated as an 'isolated' functional center, where charge compensation by means of lead vacancies is performed in distant coordination spheres.

Cu(2+)-doped Pb[Zr(0.54)Ti(0.46)]O(3) (PZT) and Cu(2+)-doped [K(0.5)Na(0.5)]NbO(3) (KNN) ferroelectrics with a dopant concentration of 0.25 mol% were investigated by means of multi-frequency and multi-pulse electron paramagnetic resonance (EPR) spectroscopy. Through the use of high magnetic fields and pulsed microwave fields an enhanced resolution was achieved yielding valuable information about the structural distortion at the dopant site. The results obtained suggest that Cu(2+) substitutes for both systems as an acceptor centre for the perovskite B-site. For reasons of local charge compensation, different kinds of defect associates invoking one and two oxygen vacancies are formed. These two kinds of extended defects differ in their electric and elastic properties. The results obtained are analyzed in order to characterize differences of the local structure in the Cu(2+)-defect center for morphotropic phase boundary compositions between the two systems. In particular, it is found that Cu(2+)-doping in KNN creates 50% more oxygen vacancies than the same amount of copper in PZT. Furthermore, local differences in covalent and ionic bonding are monitored.

Silver containing catalysts were prepared by aqueous ion exchange of Ag(+) against Na(+) in an LTA zeolite. A well-defined paramagnetic cluster consisting of six equivalent silver nuclei was obtained after oxidation and hydrogen reduction. Continuous wave EPR demonstrates that the reduced Ag(6)(+) clusters are isolated and all silver atoms are close to equivalent. Upon addition of NO gas at room temperature, the spectrum of the Ag(6)(+) cluster disappears immediately. A new spectrum has the character of adsorbed NO. Its line is split by hyperfine interaction between the unpaired electron with (14)N of the adsorbed NO, and by the nuclear spin of one Ag nucleus to which NO is bound. The experimental isotropic hyperfine coupling a approximately 11.0 G is too large for being observed in the HYSCORE spectrum, but a small (14)N-hyperfine interaction is observed and assigned to a second nitrogen spin in the vicinity of the silver cluster. In the presence of trace oxygen NO transforms slowly into NO(2), but no further activity was observed at room temperature. The NO(2) molecule exhibits dynamics in the temperature range of 30 to 125 K. The rotational diffusion is axially symmetric about the molecular y axis of the adsorbed NO(2). Above 50 K, it becomes rapidly nearly isotropic. Analysis of the correlation time (tau(c)) derived from the EPR lineshapes provides the kinetic parameters, and an Arrhenius representation gives access to the activation energy for the rotational motion.

Lithium-doped polymer-derived silicon carbonitride ceramics (SiCN:Li) synthesized at various pyrolysis temperatures, have been investigated by means of multifrequency and multipulse electron paramagnetic resonance (EPR) and Raman spectroscopy in order to determine different defect states that may impact the materials electronic properties. In particular, carbon- and silicon-based 'dangling bonds' at elevated, as well as metallic networks containing Li0 in the order of 1 microm at low pyrolysis temperatures have been observed in concentrations ranging between 10(14) and 10(17) spins mg(-1).

Ferroelectric 1 mol.% La(3)+ and 0.5 mol.% Fe(3)+ codoped Pb[Zr0(0.54)Ti0(0.46)]O(3) ceramics were studied by means of multifrequency electron paramagnetic resonance (EPR) spectroscopy. The obtained results prove that iron is incorporated at the [Zr,Ti]-site, acting as an acceptor and building a charged Fe'(Zr,Ti) - V(O)..)(.) defect dipole with a directly coordinated oxygen vacancy for partial charge compensation. This feature of the defect associates has hitherto been identified only in hard, exclusively Fe(3)+-doped PZT compounds. The present results show, however, that a similar defect association of the Fe3+ functional center with a V(O)..) also exists in soft, donor-acceptor (La(3)+,Fe(3)+)-codoped PZT. According to models developed by Arlt et al. electric dipoles from defect associates, such as the Fe'(Zr,Ti) - V(O)..)(.) defect associate, which may give rise to an internal bias field that is discussed being responsible for ferroelectric aging.

The defect structure of hard copper-modified polycrystalline PbTiO3 ferroelectrics is investigated by means of electron paramagnetic resonance and hyperfine sublevel correlation spectroscopy, as well as density functional theory calculations. Special emphasis is put on the 207Pb-hyperfine couplings, which are resolved up to the third coordination sphere. The results prove that copper is incorporated at the octahedrally coordinated Ti site, acting as an acceptor. Because of charge compensation the formation of Cu impurity-oxygen vacancy pairs is energetically very favorable. The corresponding (CuTi''-VO)x defect dipole is found to be orientated along the [001] axis.

Multifrequency electron paramagnetic resonance (EPR) and electron nuclear double resonance (ENDOR) techniques were used to obtain structural information about the copper(II)-chelidamate complex. Well-resolved nitrogen ENDOR spectra could be recorded from solid solution samples by using selective excitation of spin packets. Evaluation of nuclear quadrupole and dipolar hyperfine interaction of the directly ligated nitrogen allowed for an identification of the bond direction to the copper ion within the eigen frame of the copper g-matrix. Invoking two-dimensional EPR techniques, additional hyperfine interaction with a "distant" nitrogen spin, identified as resulting from the solvent dimethylformamide (DMF), was observed. The experimental data are only consistent with formation of a stable pseudoplanar copper complex with single solvent ligation via its oxygen atom.

The double-bridged hemicarcerand [A,B-(CH2OH)2-cavitand]-(CH2NHCH2)2-[A,B-(CH2OH)2-cavitand] 23 (and several other related compounds) was synthesized by the condensation of the two complementary precursors A,B-(CH2NH2)2(CH2OH)2-cavitand and A,B-(CH2Br)2(CH2OAc)2-cavitand followed by hydrolysis of the acetate groups. This hemicarcerand has nitrogen and oxygen donor atoms located on the interior of the spherical cavity and thus allows endohedral coordination of metal ions. The cavity has a volume of approximately 0.12 nm3, a value obtained by calculating a Connolly-type contact surface and the molecular electrostatic potential. The Cu2+ complex of hemicarcerand 23 was studied in detail by EPR and DFT calculations at the UB3LYP/6-31G level to verify the anticipated endohedral nature of the metal complex. It could be shown that the copper ion is coordinated to four oxygen donor atoms and no deviation from axial symmetry at the copper site could be detected. No direct coordination to nitrogen atoms of the hemicarcerand could be observed; however, complexation with DMF solvent molecules was detected by ESEEM and HYSCORE experiments. The closed structure of the hemicarcerand was also confirmed by an evaluation of proton-copper distances. Results from DFT calculations are in accord with the EPR results, and further support suggested coordination of the Cu(II) within the hemicarcerand cavity by four oxygen donor atoms.

A well-defined cluster containing 12 equivalent platinum atoms was prepared by ion exchange of an NaY zeolite, followed by hydrogen reduction. It was characterized by electron paramagnetic resonance (EPR) spectroscopy, hyperfine sublevel correlation (HYSCORE), and theoretical calculations. Combing the results of the experiments with density functional calculations, the likely structure of this cluster is icosahedral Pt13Hm, possibly with a low positive charge. The adsorbed H/D on the Pt cluster surface can be exchanged reversibly at room temperature. From H/D desorption experiments, an H2 binding energy of 1.36 eV is derived, in reasonable agreement with the calculated value but clearly larger than that for a (111) Pt single-crystal surface, revealing a finite size effect. While the hydrogen-covered cluster should clearly be regarded as a molecule, it is conceivable that the cluster adopts metallic character upon hydrogen desorption. It is likely that up to m=30 H atoms bind to this cluster with 12 surface atoms, which has important implications for the determination of the dispersion of small Pt catalyst particles by hydrogen chemisorption. Calculations as well as experiments give evidence of an interesting magnetic behavior with high-spin states playing a prominent role. There are strong indications that a reservoir of EPR silent but structurally similar clusters exists which can partly be converted to EPR visible species by H/D exchange or by gas adsorption.

Copper(II)- and iron(III)-modified Pb[Zr(x)Ti(1-x)]O3 ferroelectrics were investigated by means of high-field/high-frequency EPR. The results obtained suggest that Cu2+ and Fe3+ both substitute as acceptor centers for [Zr,Ti]4+. Whereas for the iron-doped system the charge compensating oxygen vacancies (V(O)**) lead to the formation of charged (Fe'(Ti-)V(O)**)* defect associates, no such associates have been observed for the copper-modified system. As regards the morphotropic phase boundary, the model of a mesoscopic mixing of the pure-member phases has been refined to a picture in which a nanoscale composition distribution prevails., (Copyright 2005 John Wiley & Sons, Ltd)

Two schemes for the measurement of orientation-dependent spin-lattice relaxation times are introduced, which combine the inversion-recovery experiment with electron-Zeeman-resolved or right-angle wiggling EPR. The principles of the experiments are outlined and their performance is illustrated by examples of application. With the electron Zeeman-resolved approach the relaxation times of two metal complexes with different g values are unraveled, whereas with right-angle wiggling the orientation-dependent relaxation behavior of a metal complex with large hyperfine anisotropy is analyzed.

Detailed information on the structure of cobalt(II) corrinates is of interest in the context of studies on the coenzyme B(12) catalyzed enzymatic reactions, where cob(II)alamin has been identified as a reaction intermediate. Cob(II)ester (heptamethyl cobyrinate perchlorate) is found to be soluble in both polar and nonpolar solvents and is therefore very suitable to study solvent effects on Co(II) corrinates. In the literature, Co(II) corrinates in solution are often addressed as four-coordinated Co(II) corrins. However, using a combination of continuous-wave (CW) and pulse electron paramagnetic resonance (EPR) and pulse ENDOR (electron nuclear double resonance) at different microwave frequencies we clearly prove axial ligation for Cob(II)ester and the base-off form of cob(II)alamin (B(12r)) in different solvents. This goal is achieved by the analysis of the g values, and the hyperfine couplings of cobalt, some corrin nitrogens and hydrogens, and solvent protons. These parameters are shown to be very sensitive to changes in the solvent ligation. Density functional computations (DFT) facilitate largely the interpretation of the EPR data. In the CW-EPR spectrum of Cob(II)ester in methanol, a second component appears below 100 K. Different cooling experiments suggest that this observation is related to the phase transition of methanol from the alpha-phase to the glassy state. A detailed analysis of the EPR parameters indicates that this transition induces a change from a five-coordinated (above 100 K) to a six-coordinated (below 100 K) Co(II) corrin. In a CH(3)OH:H(2)O mixture the phase-transition properties alter and only the five-coordinated form is detected for Cob(II)ester and for base-off B(12r) at all temperatures. Our study thus shows that the characteristics of the solvent can have a large influence on the structure of Co(II) corrinates and that comparison with the protein-embedded cofactor requires some caution. Finally, the spectral similarities between Cob(II)ester and base-off B(12r) prove the analogies in their electronic structure.

Endohedral fullerenes N@C(60) and N@C(70) were dissolved in the liquid crystal 4-methoxybenzylidene-4'-n-butylaniline (MBBA) and investigated by electron paramagnetic resonance. In both cases well resolved EPR spectra give proof for molecular orientation in the nematic mesophase. Spectral features are dominated by a nonvanishing zero-field interaction, indicating a deviation from spherical spin density distribution at the encased nitrogen atom. In N@C(70), a maximum order parameter O(33) = 0.18(3), correlated with the long axis of the cage, and a zero-field-splitting parameter D = -2.6(4) MHz were determined. A persistent zero-field splitting is also observed in C(60) via the quartet spin of the encapsulated nitrogen, although no assignment of the director with respect to the molecular frame is possible. The observed line splitting is indicative of pseudo orientation of the rapidly rotating cage in this case.