Search

Abstract Background Genomic predictions can be applied early in life without impacting selection candidates. This is especially useful for meat quality traits in sheep. Carcass and novel meat quality traits were predicted in a multi-breed sheep population that included Merino, Border Leicester, Polled Dorset and White Suffolk sheep and their crosses. Methods Prediction of breeding values by best linear unbiased prediction (BLUP) based on pedigree information was compared to prediction based on genomic BLUP (GBLUP) and a Bayesian prediction method (BayesR). Cross-validation of predictions across sire families was used to evaluate the accuracy of predictions based on the correlation of predicted and observed values and the regression of observed on predicted values was used to evaluate bias of methods. Accuracies and regression coefficients were calculated using either phenotypes or adjusted phenotypes as observed variables. Results and conclusions Genomic methods increased the accuracy of predicted breeding values to on average 0.2 across traits (range 0.07 to 0.31), compared to an average accuracy of 0.09 for pedigree-based BLUP. However, for some traits with smaller reference population size, there was no increase in accuracy or it was small. No clear differences in accuracy were observed between GBLUP and BayesR. The regression of phenotypes on breeding values was close to 1 for all methods, indicating little bias, except for GBLUP and adjusted phenotypes (regression = 0.78). Accuracies calculated with adjusted (for fixed effects) phenotypes were less variable than accuracies based on unadjusted phenotypes, indicating that fixed effects influence the latter. Increasing the reference population size increased accuracy, indicating that adding more records will be beneficial. For the Merino, Polled Dorset and White Suffolk breeds, accuracies were greater than for the Border Leicester breed due to the smaller sample size and limited across-breed prediction. BayesR detected only a few large marker effects but one region on chromosome 6 was associated with large effects for several traits. Cross-validation produced very similar variability of accuracy and regression coefficients for BLUP, GBLUP and BayesR, showing that this variability is not a property of genomic methods alone. Our results show that genomic selection for novel difficult-to-measure traits is a feasible strategy to achieve increased genetic gain.

Abstract Background The theory of genomic selection is based on the prediction of the effects of genetic markers in linkage disequilibrium with quantitative trait loci. However, genomic selection also relies on relationships between individuals to accurately predict genetic value. This study aimed to examine the importance of information on relatives versus that of unrelated or more distantly related individuals on the estimation of genomic breeding values. Methods Simulated and real data were used to examine the effects of various degrees of relationship on the accuracy of genomic selection. Genomic Best Linear Unbiased Prediction (gBLUP) was compared to two pedigree based BLUP methods, one with a shallow one generation pedigree and the other with a deep ten generation pedigree. The accuracy of estimated breeding values for different groups of selection candidates that had varying degrees of relationships to a reference data set of 1750 animals was investigated. Results The gBLUP method predicted breeding values more accurately than BLUP. The most accurate breeding values were estimated using gBLUP for closely related animals. Similarly, the pedigree based BLUP methods were also accurate for closely related animals, however when the pedigree based BLUP methods were used to predict unrelated animals, the accuracy was close to zero. In contrast, gBLUP breeding values, for animals that had no pedigree relationship with animals in the reference data set, allowed substantial accuracy. Conclusions An animal's relationship to the reference data set is an important factor for the accuracy of genomic predictions. Animals that share a close relationship to the reference data set had the highest accuracy from genomic predictions. However a baseline accuracy that is driven by the reference data set size and the overall population effective population size enables gBLUP to estimate a breeding value for unrelated animals within a population (breed), using information previously ignored by pedigree based BLUP methods.

Key message: A multi-environment genomic prediction model incorporating environmental covariates increased the prediction accuracy of wheat grain protein content. The advantage of the haplotype-based model was dependent upon the trait of interest. The inclusion of environment covariates (EC) in genomic prediction models has the potential to precisely model environmental effects and genotype-by-environment interactions. Together with EC, a haplotype-based genomic prediction approach, which is capable of accommodating the interaction between local epistasis and environment, may increase the prediction accuracy. The main objectives of our study were to evaluate the potential of EC to portray the relationship between environments and the relevance of local epistasis modelled by haplotype-based approaches in multi-environment prediction. The results showed that among five traits: grain yield (GY), plant height, protein content, screenings percentage (SP) and thousand kernel weight, protein content exhibited a 2.1% increase in prediction accuracy when EC was used to model the environmental relationship compared to treatment of the environment as a regular random effect without a variance–covariance structure. The approach used a Gaussian kernel to characterise the relationship among environments that displayed no advantage in contrast to the use of a genomic relationship matrix. The prediction accuracies of haplotype-based approaches for SP were consistently higher than the genotype-based model when the numbers of single-nucleotide polymorphisms (SNP) in a haplotype were from three to ten. In contrast, for GY, haplotype-based models outperformed genotype-based methods when two to four SNPs were used to construct the haplotype. [ABSTRACT FROM AUTHOR]

Many genome variants shaping mammalian phenotype are hypothesized to regulate gene transcription and/or to be under selection. However, most of the evidence to support this hypothesis comes from human studies. Systematic evidence for regulatory and evolutionary signals contributing to complex traits in a different mammalian model is needed. Sequence variants associated with gene expression (expression quantitative trait loci [eQTLs]) and concentration of metabolites (metabolic quantitative trait loci [mQTLs]) and under histone-modification marks in several tissues were discovered from multiomics data of over 400 cattle. Variants under selection and evolutionary constraint were identified using genome databases of multiple species. These analyses defined 30 sets of variants, and for each set, we estimated the genetic variance the set explained across 34 complex traits in 11,923 bulls and 32,347 cows with 17,669,372 imputed variants. The per-variant trait heritability of these sets across traits was highly consistent (r > 0.94) between bulls and cows. Based on the per-variant heritability, conserved sites across 100 vertebrate species and mQTLs ranked the highest, followed by eQTLs, young variants, those under histone-modification marks, and selection signatures. From these results,we defined a Functional-And-Evolutionary Trait Heritability (FAETH) score indicating the functionality and predicted heritability of each variant. In additional 7,551 cattle, the high FAETH-ranking variants had significantly increased genetic variances and genomic prediction accuracies in 3 production traits compared to the low FAETH-ranking variants. The FAETH framework combines the information of gene regulation, evolution, and trait heritability to rank variants, and the publicly available FAETH data provide a set of biological priors for cattle genomic selection worldwide. [ABSTRACT FROM AUTHOR]

Background: The use of whole-genome sequence (WGS) data for genomic prediction and association studies is highly desirable because the causal mutations should be present in the data. The sequencing of 935 sheep from a range of breeds provides the opportunity to impute sheep genotyped with single nucleotide polymorphism (SNP) arrays to WGS. This study evaluated the accuracy of imputation from SNP genotypes to WGS using this reference population of 935 sequenced sheep. Results: The accuracy of imputation from the Ovine Infinium® HD BeadChip SNP (~ 500 k) to WGS was assessed for three target breeds: Merino, Poll Dorset and F1 Border Leicester × Merino. Imputation accuracy was highest for the Poll Dorset breed, although there were more Merino individuals in the sequenced reference population than Poll Dorset individuals. In addition, empirical imputation accuracies were higher (by up to 1.7%) when using larger multi-breed reference populations compared to using a smaller single-breed reference population. The mean accuracy of imputation across target breeds using the Minimac3 or the FImpute software was 0.94. The empirical imputation accuracy varied considerably across the genome; six chromosomes carried regions of one or more Mb with a mean imputation accuracy of < 0.7. Imputation accuracy in five variant annotation classes ranged from 0.87 (missense) up to 0.94 (intronic variants), where lower accuracy corresponded to higher proportions of rare alleles. The imputation quality statistic reported from Minimac3 (R2) had a clear positive relationship with the empirical imputation accuracy. Therefore, by first discarding imputed variants with an R2 below 0.4, the mean empirical accuracy across target breeds increased to 0.97. Although accuracy of genomic prediction was less affected by filtering on R2 in a multi-breed population of sheep with imputed WGS, the genomic heritability clearly tended to be lower when using variants with an R2 ≤ 0.4. Conclusions: The mean imputation accuracy was high for all target breeds and was increased by combining smaller breed sets into a multi-breed reference. We found that the Minimac3 software imputation quality statistic (R2) was a useful indicator of empirical imputation accuracy, enabling removal of very poorly imputed variants before downstream analyses. [ABSTRACT FROM AUTHOR]

Key message: Exploitation of data from a ryegrass breeding program has enabled rapid development and implementation of genomic selection for sward-based biomass yield with a twofold-to-threefold increase in genetic gain.Abstract: Genomic selection, which uses genome-wide sequence polymorphism data and quantitative genetics techniques to predict plant performance, has large potential for the improvement in pasture plants. Major factors influencing the accuracy of genomic selection include the size of reference populations, trait heritability values and the genetic diversity of breeding populations. Global diversity of the important forage species perennial ryegrass is high and so would require a large reference population in order to achieve moderate accuracies of genomic selection. However, diversity of germplasm within a breeding program is likely to be lower. In addition, de novo construction and characterisation of reference populations are a logistically complex process. Consequently, historical phenotypic records for seasonal biomass yield and heading date over a 18-year period within a commercial perennial ryegrass breeding program have been accessed, and target populations have been characterised with a high-density transcriptome-based genotyping-by-sequencing assay. Ability to predict observed phenotypic performance in each successive year was assessed by using all synthetic populations from previous years as a reference population. Moderate and high accuracies were achieved for the two traits, respectively, consistent with broad-sense heritability values. The present study represents the first demonstration and validation of genomic selection for seasonal biomass yield within a diverse commercial breeding program across multiple years. These results, supported by previous simulation studies, demonstrate the ability to predict sward-based phenotypic performance early in the process of individual plant selection, so shortening the breeding cycle, increasing the rate of genetic gain and allowing rapid adoption in ryegrass improvement programs. [ABSTRACT FROM AUTHOR]

Abstract: We have developed the first comprehensive simulator for polyploid genomes (PolySim) and demonstrated its value by performing large‐scale simulations to examine the effect of different population parameters on the evolution of polyploids. PolySim is unlimited in terms of ploidy, population size or number of simulated loci. Our process considered the evolution of polyploids from diploid ancestors, polysomic inheritance, inbreeding, recombination rate change in polyploids and gene flow from lower to higher ploidies. We compared the number of segregating single nucleotide polymorphisms, minor allele frequency, heterozygosity, R2 and average kinship relatedness between different simulated scenarios, and to real data from polyploid species. As expected, allotetraploid populations showed no difference from their ancestral diploids when population size remained constant and there was no gene flow or multivalent (MV) pairing between subgenomes. Autotetraploid populations showed significant differences from their ancestors for most parameters and diverged from their ancestral populations faster than allotetraploids. Autotetraploids can have significantly higher heterozygosity, relatedness and extended linkage disequilibrium compared with allotetraploids. Interestingly, autotetraploids were more sensitive to increasing selfing rate and decreasing population size. MV formation can homogenize allotetraploid subgenomes, but this homogenization requires a higher MV rate than previously proposed. Our results can be considered as the first building block to understand polyploid population evolutionary dynamics. PolySim can be used to simulate a wide variety of polyploid organisms that mimic empirical populations, which, in combination with quantitative genetics tools, can be used to investigate the power of genomewide association, genomic selection or breeding programme designs in these species. [ABSTRACT FROM AUTHOR]