Search

Abstract: Edges of 2D transition metal dichalcogenides (TMDs) are well known as highly reactive sites, thus researchers have attempted to maximize the edge site density of 2D TMDs. In this work, metal‐organic framework (MOF) templates are introduced to synthesize few‐layered WS2 nanoplates (a lateral dimension of ≈10 nm) confined in Co, N‐doped hollow carbon nanocages (WS2_Co‐N‐HCNCs), for highly sensitive NO2 gas sensors. WS2 precursors are assembled in the surface cavity of Co‐based zeolite imidazole framework (ZIF‐67) and subsequent pyrolysis produced WS2_Co‐N‐HCNCs. During the pyrolysis, the carbonized ZIF‐67 are doped by Co and N elements, and the growth of WS2 is effectively suppressed, creating few‐layered WS2 nanoplates functionalized Co‐N‐HCNCs. The WS2_Co‐N‐HCNCs exhibit outstanding NO2 sensing characteristics at room temperature, in terms of response (48.2% to 5 ppm), selectivity, response and recovery speed, and detection limit (100 ppb). These results are attributed to the enhanced adsorption and desorption kinetics of NO2 on abundant WS2 edges, confined in the gas permeable HCNCs. This work opens up an efficient way for the facile synthesis of edge abundant few‐layered TMDs combined with porous carbon matrix via MOF templating route, for applications relying on highly active sites. [ABSTRACT FROM AUTHOR]

Transition metal dichalcogenides (TMDs), such as molybdenum disulfide (MoS2) and tungsten disulfide (WS2), have been studied intensively in recent years due to wide range of potential applications. TMD gas sensors have been developed and intensively explored for their promising applications. In recent times, it has been reported that edge sites of TMDs can contribute to highly enhanced gas adsorption properties. Herein, superior room temperature gas sensing properties of WS2 edge functionalized carbon nanofibers (CNFs) with multiple tubular pores (WS2@MTCNFs) have been demonstrated. A copolymer-electrospinning route, which uses poly(styrene-acrylonitrile) as sacrificial templates and WS2 precursor containing poly(acrylonitrile) as carbon matrix, offered facile synthesis of CNFs having high gas permeability with single-layered WS2 edge-rich surface. As a result, WS2@MTCNFs based sensors exhibited notable gas response (15% at 1 ppm of NO2) at room temperature compared to pristine CNFs (2% at 1 ppm of NO2), which can be attributed to the synergistic effects that originated from enhanced surface area and open porosity with numerous elongated pore channels of MTCNFs as well as remarkably increased active spots on the surface from WS2 edge sites. [ABSTRACT FROM AUTHOR]

2D Ru oxide nanosheets (NSs) with optically punched nanoholes are synthesized and integrated on a flexible heating substrate, i.e., silver nanowire (Ag NW)-embedded colorless polyimide (cPI) film, for application in wearable chemical sensors. Multiple discrete pores on the sub-5-nm scale are formed on the basal planes of Ru oxide NSs by irradiation of intense pulsed light. The chemical sensing characteristic of the porous Ru oxide NSs toward nitrogen dioxide (NO2) is investigated under controlled temperatures by applying DC voltage to the Ag NW-embedded cPI film. The improved NO2 responding and recovery kinetics are achieved using the porous Ru oxide NSs with sensitivity of 1.124% at 20 ppm at a film temperature of 80.3 °C. A wireless patch-type sensor module is developed to demonstrate wearable sensing of NO2 using the Ru oxide NSs on Ag NW-embedded cPI heating film. This work paved the new way for application of atomically thin and porous Ru oxide NSs in chemical sensors, which can detect hazardous species in real time. [ABSTRACT FROM AUTHOR]

1D metal-oxide nanotube (NT) structures have attracted considerable attention for applications in chemical sensors due to their high surface area and unique chemical and physical properties. Moreover, bimodal pores, i.e., meso- and macro-sized pores, which are formed on the shell of NTs, can further facilitate gas penetration into the sensing layers, leading to much improved sensing properties. However, thin-walled NTs with bimodal pore distribution have been rarely fabricated due to the limitations of synthetic methods. Here, Ostwald ripening-driven electrospinning combined with sacrificial templating route using polystyrene (PS) colloid and bioinspired protein is firstly proposed for producing both bi-modal pores and catalyst-loaded thin-walled SnO2 NTs. Homogeneous catalyst loading on porous SnO2 NTs is achieved by the protein cage that contains catalysts and PS colloids and protein shells are thermally decomposed during calcination of electrospun fibers, resulting in the creation of dual-sized pores on NTs. Pt catalyst decorated porous SnO2 NTs (Pt-PS_SnO2 NTs) show exceptionally high acetone gas response, superior selectivity against other interfering gases, and very low limit of detection (10 ppb) to simulated diabetic acetone molecules. More importantly, sensor arrays assembled with developed porous SnO2 NTs enable the direct distinction between the simulated diabetic breath and normal breath from healthy people. [ABSTRACT FROM AUTHOR]

In this work, highly porous WO 3 nanotubes (NTs) were synthesized by facile layer-by-layer (LbL) self-assembly on polymeric nanofiber (NF) templates followed by calcination. Polymeric NFs using poly(methyl methacrylate) (PMMA) were prepared by electrospinning as sacrificial templates. Then, ionic polymers were coated on PMMA to modify the surface charge of PMMA NFs. Catalyst-loaded WO 3 NTs were synthesized by self-assembly of tungsten precursor and catalytic precursor on the surface of the polymeric PMMA NFs followed by calcination at 500 °C for 1 h. Gas sensing performances were evaluated in highly humid atmosphere (90% RH) using pristine WO 3 NTs, Pt-loaded WO 3 NTs (Pt-WO 3 NTs), and Pd-loaded WO 3 NTs (Pd-WO 3 NTs). Pristine WO 3 NTs exhibited a high NO response ( R gas / R air = 63.59 at 5 ppm) at 350 °C and cross-selectivity toward toluene ( R air / R gas = 1.05 at 5 ppm). On the other hand, Pt-WO 3 NTs and Pd-WO 3 NTs exhibited a high toluene response ( R air / R gas = 2.24 for the Pt-WO 3 NTs and R air / R gas = 2.35 for the Pd-WO 3 NTs at 5 ppm) at 400 °C and a negligible NO response ( R gas / R air = 1.25 for the Pt-WO 3 NTs and R gas / R air = 1.04 for the Pd-WO 3 NTs at 5 ppm) at 400 °C. These results demonstrated that LbL synthesis is a highly promising method for producing hollow semiconductor metal oxide NTs functionalized with various catalysts, which leads to potential application in exhaled breath analysis for asthma and lung cancer diagnosis. [ABSTRACT FROM AUTHOR]

In order to increase two important factors of capacitance and self-resonant frequency (SRF) of the microelectromechanical systems (MEMS)-switched capacitor, we developed a room-temperature-grown high- $\kappa $ TiO2 dielectric layer in the metal–insulator–metal (MIM) capacitor and an SU-8 bridged beam structure in the MEMS switch. The high- $\kappa $ TiO2 dielectric layer, which has a relative dielectric constant of up to 32, was utilized to minimize the MIM capacitors’ sizes while maintaining their high capacitance values. In addition, the SU-8 bridged beam structure of the MEMS switch, whose radio frequency (RF) signal interconnecting part is electrically isolated from the switching mechanism, was introduced to shorten the RF signal path. Because of the high- $\kappa $ dielectric and the bridged beam structure, we have achieved a very high capacitance of up to 14.3 pF with an SRF of 1.8 GHz (the MIM capacitor size was $50~\mu $ m $\times 1200~\mu $ m). The same-sized MIM capacitor with a conventional Si3N4 dielectric layer and a conventional cantilever beam-switched capacitor showed only 4.9 pF with an SRF of 2.8 GHz. In a similar capacitance value, the proposed switched capacitor showed 22% increase in SRF (7.1 GHz at 0.92 pF) compared with the conventional cantilever beam switched capacitor with a Si3N4 dielectric layer (5.8 GHz at 1.01 pF). The high SRF was attributed to the short RF signal path and the minimized capacitor size, thereby reducing parasitic inductance. [2014-0130] [ABSTRACT FROM AUTHOR]

Pore-loaded WO3 nanofibers (NFs) functionalized with spherical catalyst films were achieved via electrospinning combined by the sacrificial templating route using layer-by-layer (LbL) catalyst assembled polystyrene (PS) colloids. The catalyst-loaded porous WO3 NFs exhibited significantly improved toluene and acetone detection capability for potential application in exhaled breath analysis. [ABSTRACT FROM AUTHOR]

Abstract: Chemoresistive H2S sensors using various oxide nanoparticles were prepared and heat-treated at 600°C in an effort to define halitosis in human breath. WO3, ZnO, and SnO2 were tested as sensing materials, among which WO3 showed the highest stability to H2S. XPS analysis showed a metal sulfate peak on the surface of ZnO and SnO2, which causes a recovery problem after 2ppm H2S exposure. On the contrary, the WO3 sensor showed a stable signal in long-term operation in the presence of H2S gas. WO3 gas sensors decorated with various catalytic metals were fabricated to investigate their sensing properties in the 0.2–5ppm H2S range with 80% relative humidity (RH). A 0.03wt% Au-doped WO3 sensor exhibited excellent H2S sensitivity (R air/R gas =12.40at 2ppm) toward H2S, whereas pure WO3 showed a sensitivity of 4.85 with negligible interference from the volatile organic compounds (VOCs). [Copyright &y& Elsevier]

In this work, we report a remarkably improved toluene response and superior cross-sensitivity against H2S molecules by combining Pd catalysts and highly porous WO3 nanofibers (NFs). We functionalized Pd catalysts inside and/or outside of WO3 NFs synthesized by electrospinning, which is a facile and versatile process for producing webs of metal oxide NFs. Pd-embedded WO3 NFs were obtained by the electrospinning of a Pd and W composite precursor/poly(methyl methacrylate) (PMMA) solution followed by calcination at 700°C. Pd nanoparticles (NPs) (6–10nm) synthesized by a polyol method were decorated on the WO3 NFs (Pd-NPs/WO3 NFs) by the attachment of the Pd NPs on as-prepared WO3 NFs. The gas sensing characteristics of pure WO3, Pd-embedded WO3, Pd-NPs/WO3, and Pd-NPs/Pd-embedded WO3 NFs were tested using H2S and toluene gases in a highly humid atmosphere (RH 90%), which is similar to human exhaled breath. The results showed that the Pd-NPs/Pd-embedded WO3 NFs whose inner and outer layers were decorated by Pd catalysts, exhibited a high toluene response (R air/R gas =5.5 at 1ppm) and remarkable selectivity against H2S (R air/R gas =1.36 at 1ppm) at 350°C, whereas pristine WO3 NFs showed superior H2S response (R air/R gas =11.1 at 1ppm) along with a negligible response toward toluene (R air/R gas =1.27 at 1ppm). The highly porous WO3 NFs decorated with Pd catalysts, exhibited potential feasibility, i.e., a low limit of detection (LOD) of 20ppb (R air/R gas =1.32) at 350°C, for application in VOCs sensors, particularly for diagnoses of lung cancer. [ABSTRACT FROM AUTHOR]

Hierarchical SnO2 fibers assembled from wrinkled thin tubes are synthesized by controlling the microphase separation between tin precursors and polymers, by varying flow rates during electrospinning and a subsequent heat treatment. The inner and outer SnO2 tubes have a number of elongated open pores ranging from 10 nm to 500 nm in length along the fiber direction, enabling fast transport of gas molecules to the entire thin-walled sensing layers. These features admit exhaled gases such as acetone and toluene, which are markers used for the diagnosis of diabetes and lung cancer. The open tubular structures facilitated the uniform coating of catalytic Pt nanoparticles onto the inner SnO2 layers. Highly porous SnO2 fibers synthesized at a high flow rate show five-fold higher acetone responses than densely packed SnO2 fibers synthesized at a low flow rate. Interestingly, thin-wall assembled SnO2 fibers functionalized by Pt particles exhibit a dramatically shortened gas response time compared to that of un-doped SnO2 fibers, even at low acetone concentrations. Moreover, Pt-decorated SnO2 fibers significantly enhance toluene response. These results demonstrate the novel and practical feasibility of thin-wall assembled metal oxide based breath sensors for the accurate diagnosis of diabetes and potential detection of lung cancer. [ABSTRACT FROM AUTHOR]