Search

To endow an implant surface with enhanced properties to ensure an appropriate seal with the host tissue for inflammation/infection resistance, next-generation bone implant collagen-polyphenol nanolayers were built on conventional titanium surfaces through a multilayer approach. X-ray Photoelectron Spectroscopy (XPS) analysis was performed to investigate the chemical arrangement of molecules within the surface layer and to provide an estimate of their thickness. A short-term (2 and 4 weeks) in vivo test of bone implants in a healthy rabbit model was performed to check possible side effects of the soft surface layer on early phases of osteointegration, leading to secondary stability. Results show the building up of the different nanolayers on top of titanium, resulting in a final composite collagen-polyphenol surface and a layer thickness of about 10 nm. In vivo tests performed on machined and state-of-the-art microrough titanium implants do not show significant differences between coated and uncoated samples, as the surface microroughness remains the main driver of bone-to-implant contact. These results confirm that the surface nanolayer does not interfere with the onset and progression of implant osteointegration and prompt the green light for specific investigations of the potential merits of this bioactive coating as an enhancer of the device/tissue seal.

An injectable delivery platform for promoting delayed bone healing has been developed by combining a thermosensitive polyurethane-based hydrogel with strontium-substituted mesoporous bioactive glasses (MBG_Sr) for the long-term and localized co-delivery of pro-osteogenic Sr 2+ ions and an osteogenesis-enhancing molecule, N -Acetylcysteine (NAC). The incorporation of MBG_Sr microparticles, with a final concentration of 20 mg/mL, did not alter the overall properties of the thermosensitive hydrogel, in terms of sol-to-gel transition at a physiological-like temperature, gelation time, injectability and stability in aqueous environment at 37 °C. In particular, the hydrogel formulations (15% w/v polymer concentration) showed fast gelation in physiological conditions (1 mL underwent complete sol-to-gel transition within 3-5 min at 37 °C) and injectability in a wide range of temperatures (5-37 °C) through different needles (inner diameter in the range 0.4-1.6 mm). In addition, the MBG_Sr embedded into the hydrogel retained their full biocompatibility, and the released concentration of Sr 2+ ions were effective in promoting the overexpression of pro-osteogenic genes from SAOS2 osteoblast-like cells. Finally, when incorporated into the hydrogel, the MBG_Sr loaded with NAC maintained their release properties, showing a sustained ion/drug co-delivery along 7 days, at variance with the MBG particles as such, showing a strong burst release in the first hours of soaking.

Oral diseases and periodontitis in particular are a major health burden worldwide, because of their association with various systemic diseases and with conditions such as peri-implantitis. Attempts have been made over the years to reverse bone loss due to the host disproportionate inflammatory response and to prevent failure of dental implants. To this end, the use of biomaterials functionalized with molecules characterized by anti-inflammatory and antioxidant properties could represent a new frontier for regenerating functional periodontal tissues. In this study, a new ceramic granulated biomaterial, named Synergoss Red (SR), functionalized with a polyphenolic mixture extracted from pomace of the Croatina grape variety, is introduced. Following a preliminary in-depth characterization of the extract by HPLC analysis and of the biomaterial surface and composition, we performed evaluations of cytocompatibility and a biological response through in vitro assays. The anti-inflammatory and antioxidant properties of the identified phenolic molecules contained in SR were shown to downregulate inflammation in macrophages, to stimulate in osteoblast-like cells the expression of genes involved in deposition of the early bone matrix, and to mitigate bone remodeling by decreasing the RANKL/OPG ratio. Thanks to its cytocompatibility and assorted beneficial effects on bone regeneration, SR could be considered an innovative regenerative approach in periodontal therapy.

In the present study, the cytotoxicity and the antimicrobial activity of two silver citrate-based irrigant solutions were investigated. Cytotoxicity of various concentrations (0.25%, 0.5%, 1%, 2.5%, 5%) of both solutions (BioAKT and BioAKT Endo) was assessed on L-929 mouse fibroblasts using the MTT assay. For the quantitative analysis of components, an infrared (I.R.) spectroscopy was performed. The minimum inhibitory and minimal bactericidal concentrations (M.I.C. and M.B.C., respectively) were ascertained on Enterococcus faecalis strain ATCC 4083. For biofilm susceptibility after treatment with the irrigating agent, a minimum biofilm eradication concentration (M.B.E.C.) and confocal laser scanning microscope (C.L.S.M.) assays were performed. Quantification of E. faecalis cell biomass and percentage of live and dead cells in the biomass was appraised. Normality of data was analyzed using the D'Agostino & Pearson's test and the Shapiro-Wilk test. Statistical analysis was performed using one-way analysis of variance (ANOVA) and Tukey's test. Both silver citrate solutions showed mouse fibroblasts viability >70% when diluted to 0.25% and 0.5%. Conversely, at higher concentrations, they were extremely cytotoxic. F.T.-IR spectroscopy measurements of both liquids showed the same spectra, indicating similar chemical characteristics. No substantial contrast in antimicrobial activity was observed among the two silver citrate solutions by using broth microdilution methods, biofilm susceptibility (MBEC-HTP device), and biomass screening using confocal laser scanning microscopy (C.L.S.M.) technique. Both solutions, used as root canal irrigants, exhibited significant antimicrobial activity and low cytocompatibility at dilutions greater than 0.5%.

Polyphenols are increasingly investigated for the treatment of periodontitis and research on their use in dental biomaterials is currently being conducted. Grape pomace extracts are a rich source of polyphenols. In the present study, the polyphenols of two different types of grape pomace were characterized and identified by high‑performance liquid chromatography‑diode array detector, and the effect of polyphenol‑rich grape pomace extracts on mesenchymal stem cell (MSC) osteogenic differentiation was investigated. Solid‑liquid extraction was used to recover polyphenols from red and white grape pomace. The two extracts have been characterized through the phenolic content and antioxidant power. Human MSCs (hMSCs) from the bone marrow were cultured both with and without given amounts (10 or 20 µg/ml) of the obtained pomace extracts. Their effects on cell differentiation were evaluated by reverse transcription‑quantitative polymerase chain reaction, compared with relevant controls. Results showed that both pomace extracts, albeit different in phenolic composition and concentration, induced multiple effects on hMSC gene expression, such as a decreased receptor activator of nuclear factor κ‑Β ligand/osteoprotegerin ratio and an enhanced expression of genes involved in osteoblast differentiation, thus suggesting a shift of hMSCs towards osteoblast differentiation. The obtained results provided data in favor of the exploitation of polyphenol properties from grape pomace extracts as complementary active molecules for dental materials and devices for bone regeneration in periodontal defects.

Mesoporous bioactive glass nanoparticles (MBGNs) are emerging biomaterials for bone repair/regeneration, considering their favorable pro-osteogenic and proangiogenic activities. To further improve their therapeutic effects, the endowment of MBGNs with additional antioxidant properties is of particular interest to target oxidative stress related to bone remodeling and diseases. To this end, we developed antioxidant cerium-containing MBGNs (Ce-MBGNs) (particle size of 100-300 ​nm) by using a postimpregnation strategy to incorporate Ce, through which the shape, pore structure, and dispersity of the nanoparticles were preserved. The incorporated amount of Ce could be tailored by adjusting the concentration of the Ce precursor solution. When impregnated at a relatively low temperature (20 ​°C), Ce-MBGNs containing either 1.8 or 2.8 ​mol% of Ce were produced, while the formation of by-product cerium oxide nanoparticles (nanoceria) could be avoided. In both developed Ce-MBGNs, the concentration of Ce 4+ was higher than that of Ce 3+ , while the relative molar percentage of Ce 4+ was similar (∼74%) in both Ce-MBGNs. The obtained Ce-MBGNs were evidenced to be non-cytotoxic against fibroblasts at the concentration of 1 ​mg/mL. Moreover, the incorporation of Ce into MBGNs significantly reduced the expression of oxidative stress-related genes in macrophages (J774a.1). Particularly in the presence of pro-oxidation agents, Ce-MBGNs could downregulate the expression of oxidative stress-related genes in comparsion with the polystyrene plates (control). When cultured with Ce-MBGNs, the expression of proinflammatory-related genes in macrophages could also be downregulated in comparsion with MBGNs and the control. Ce-MBGNs also exhibited pro-osteogenic activities through suppressing pro-osteoclastogenic responses. The obtained results highlight the great potential of the developed Ce-MBGNs in a variety of biomedical applications, particularly in treating bone defects under inflammatory conditions, considering their antioxidant, anti-inflammatory, and pro-osteogenesis activities., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2020 The Author(s).)

To achieve optimal performances, guided bone regeneration membranes should have several properties, in particular, proper stiffness and tear resistance for space maintenance, appropriate resorption time, and non-cytotoxic effect. In this work, polyphenol-rich pomace extract (PRPE), from a selected grape variety (Nebbiolo), rich in proanthocyanidins and flavonols (e.g., quercetin), was used as a rich source of polyphenols, natural collagen crosslinkers, to improve the physical properties of the porcine pericardium membrane. The incorporation of polyphenols in the collagen network of the membrane was clearly identified by infra-red spectroscopy through the presence of a specific peak between 1360-1380 cm -1 . Polyphenols incorporated into the pericardium membrane bind to collagen with high affinity and reduce enzymatic degradation by 20% compared to the native pericardium. The release study shows a release of active molecules from the membrane, suggesting a possible use in patients affected by periodontitis, considering the role of polyphenols in the control of this pathology. Mechanical stiffness is increased making the membrane easier to handle. Young's modulus of pericardium treated with PRPE was three-fold higher than the one measured on native pericardium. Tear and suture retention strength measurement suggest favorable properties in the light of clinical practice requirements.

Biochemical modification of titanium surfaces (BMTiS) entails immobilization of biomolecules to implant surfaces in order to induce specific host responses. This crossover randomized clinical trial assesses clinical success and marginal bone resorption of dental implants bearing a surface molecular layer of covalently-linked hyaluronan in comparison with control implants up to 36 months after loading. Patients requiring bilateral implant rehabilitation received hyaluronan covered implants in one side of the mouth and traditional implants in the other side. Two months after the first surgery, a second surgery was undergone to uncover the screw and to place a healing abutment. After two weeks, the operator proceeded with prosthetic procedures. Implants were evaluated by periapical radiographs and the crestal bone level was recorded at mesial and distal sites-at baseline and up to 36 months. One hundred and six implants were positioned, 52 HY-coated, and 48 controls were followed up. No differences were observed in terms of insertion and stability, wound healing, implant success, and crestal bone resorption at any time considered. All interventions had an optimal healing, and no adverse events were recorded. This trial shows, for the first time, a successful use in humans of biochemical-modified implants in routine clinical practice and in healthy patients and tissues with satisfactory outcomes.

The objectives of this study are to evaluate long-term wettability of novel surface-engineered, clinically available dental implants, featuring a surface nanolayer of covalently linked hyaluronan, and to confirm the relationships between wetting properties and surface nanostructure and microstructure. Wettability measurements were performed on clinically available hyaluronan-coated Grade 4 titanium implants, packaged and sterile, that is, in the "on the shelf" condition, after 1 year from production. Wetting properties were measured by the Wilhelmy plate method. Analysis of the surface structure and chemistry was perfomed by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) analysis, atomic force microscopy (AFM), and ζ -potential measurement, either on implants or disks or plates subjected to the same surface-engineering process. Results show that hydrophilicity and ensuing capillary rise of the hyaluronan-coated implant surface is unaffected by aging and dry storage. Chemical analysis of the implant surface by XPS and evaluation of the ζ potential indicate that hyaluronan chemistry and not that of titanium dictates interfacial properties. Comparison between XPS versus EDX and SEM versus AFM data confirm that the thickness of the hyaluronan surface layer is within the nanometer range. Data show that nanoengineering of the implant surface by linking of the hydrophilic hyaluronan molecule endows tested titanium implants by permanent wettability, without need of wet storage as presently performed to keep long-term hydrophilic implant surfaces. From an analytical point of view, the introduction in routine clinical practice of nanoengineered implant surfaces requires upgrading of analytical methods to the nanoscale.

Over the recent years, mesoporous bioactive glasses (MBGs) gained interest as bone regeneration systems, due to their excellent bioactivity and ability to release therapeutic molecules. In order to improve the bone regeneration ability of MBGs, the incorporation of Sr 2+ ions, due to its recognized pro-osteogenenic potential, represents a very promising strategy. In this study, MBGs based on the SiO₂⁻CaO system and containing different percentages (2 and 4 mol %) of strontium were prepared by two synthesis methods, in the form of microspheres and nanoparticles. Sr-containing MBGs were characterized by FE-SEM, XRD and N₂ adsorption/desorption analysis. The in vitro bioactivity in SBF resulted excellent. The assessment of fibroblast cell (line L929) viability showed that Sr-containing MBGs were biocompatible both in form of micro- and nanoparticles. The osteogenic response of osteoblast-like SAOS-2 cells was investigated by analysing the expression of GAPDH, COL1a1, RANKL, SPARC, OPG and ALPL genes, as cell differentiation markers. The results indicate that the incorporation of Sr into MBG is beneficial for bone regeneration as promotes a pro-osteogenic effect, paving the way to the design of advanced devices enabled by these nanocarriers also in combination with drug release, for the treatment of bone pathologies, particularly in patients with osteoporosis.

Periprosthetic infection is a consequence of implant insertion procedures and strategies for its prevention involve either an increase in the rate of new bone formation or the release of antibiotics such as vancomycin. In this work we combined both strategies and developed a novel, multifunctional three-dimensional porous scaffold that was produced using hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP), coupled with a pectin (PEC)-chitosan (CHIT) polyelectrolyte (PEI), and loaded with vancomycin (VCA). By this approach, a controlled vancomycin release was achieved and serial bacterial dilution test demonstrated that, after 1week, the engineered construct still inhibits the bacterial growth. Degradation tests show an excellent behavior in a physiological and acidic environment (<10% of mass loss). Furthermore, the PEI coating shows an anti-inflammatory response, and good cell proliferation and migration were demonstrated in vitro using osteoblast SAOS-2 cell line. This new engineered construct exhibits excellent properties both as an antibacterial material and as a stimulator of bone formation, which makes it a good candidate to contrast periprosthetic infection., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Unlabelled: The osseointegration of dental implants and their consequent long-term success is guaranteed by the presence, in the extraction site, of healthy and sufficient alveolar bone. Bone deficiencies may be the result of extraction traumas, periodontal disease and infection. In these cases, placement of titanium implants is contraindicated until a vertical bone augmentation is obtained. This goal is achieved using bone graft materials, which should simulate extracellular matrix (ECM), in order to promote osteoblast proliferation and fill the void, maintaining the space without collapsing until the new bone is formed. In this work, we design, develop and characterize a novel, moldable chitosan-pectin hydrogel reinforced by biphasic calcium phosphate particles with size in the range of 100-300μm. The polysaccharide nature of the hydrogel mimics the ECM of natural bone, and the ceramic particles promote high osteoblast proliferation, assessed by Scanning Electron Microscopy analysis. Swelling properties allow significant adsorption of water solution (up to 200% of solution content) so that the bone defect space can be filled by the material in an in vivo scenario. The incorporation of ceramic particles makes the material stable at different pH and increases the compressive elastic modulus, toughness and ultimate tensile strength. Furthermore, cell studies with SAOS-2 human osteoblastic cell line show high cell proliferation and adhesion already after 72h, and the presence of ceramic particles increases the expression of alkaline phosphatase activity after 1week. These results suggest a great potential of the developed moldable biomaterials for the regeneration of the alveolar bone., Statement of Significance: The positive fate of a surgical procedure involving the insertion of a titanium screw still depends on the quality and quantity of alveolar bone which is present in the extraction site. Available materials are basically hard scaffold materials with un-predictable behavior in different condition and difficult shaping properties. In this work we developed a novel pectin-chitosan hydrogel reinforced with ceramic particles. Polysaccharides simulate the extracellular matrix of natural bone and the extensive in vitro cells culture study allows to assess that the incorporation of the ceramic particles promote a pro-osteogenic response. Shape control, easy adaption of the extraction site, predictable behavior in different environment condition, swelling properties and an anti-inflammatory response are the significant characteristics of the developed biomaterial., (Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

This case report provided a unique opportunity to investigate the extent of microbiota infiltration on the oxidized implant surface that has been compromised by peri-implantitis. Scanning electron microscopic analysis confirmed the etiologic role of the bacteria on the loss of supporting structure and the difficulty in complete removal of bacterial infiltration on the implant surface. This case report emphasizes the need to perform definitive surface decontamination on failing dental implants prior to a regeneration procedure.

The objects of this research are commercially pure titanium surfaces, with multifunctional behavior, obtained through a chemical treatment and biological functionalization. The explored surfaces are of interest for dental implants, in contact with bone, where several simultaneous and synergistic actions are needed, in order to get a fast and effective osseointegration. The here described modified surfaces present a layer of titanium oxide, thicker than the native one, with a multi-scale surface topography (a surface roughness on the nano scale, which can be overlapped to a micro or macro roughness of the substrate) and a high density of OH groups, that increase surface wettability, induce a bioactive behavior (hydroxyapatite precipitation in simulated body fluid) and make possible the grafting of biomolecules (alkaline phosphatase, ALP, in the present research). The surface oxide is an efficient barrier against corrosion, with passive behavior both with and without application of an external voltage., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The goal of the present work was to investigate the relationship between in vivo healing and inflammatory response and in vitro cytokine expression by macrophages of a synthetic bone filler (25% hydroxylapatite-75% β-tricalcium phosphate) bearing a surface nanolayer of collagen. A clinically accepted, state-of-the-art xenograft material was used as a "negative control," that is, as a material that provides the correct clinical response for the intended use. In vitro data show that both materials exert a very low stimulation of proinflammatory cytokines by macrophages, and this was confirmed by the very mild inflammatory response detected in in vivo tests of local response in a rabbit model. Also, in vitro findings suggest a different mechanism of healing for the test and the control material, with a higher regenerative activity for the synthetic, resorbable filler, as confirmed by in vivo observation and literature reports. Thus, the simple in vitro model adopted provides a reasonable forecast of in vivo results, suggesting that new product development can be guided by in vitro tuning of cell-materials interactions.

Purpose: To investigate the effects of titanium implants functionalised with collagen type I (TiColl) on bone regeneration and osteointegration in a healthy and osteopenic rat animal model., Method: TiColl screws were implanted into the femoral condyles of healthy and osteopenic rats and compared with acid-etched titanium (Ti) screws. The osteointegration process was evaluated by a complementary approach combining microtomographic, histological, histomorphometric and biomechanical investigations at four and 12 weeks., Results: The TiColl screw also ensured a greater mechanical stability; the push-out values for TiColl screws increased from four to 12 weeks (+28 %). The energy necessary to detach the bone from the screw was significantly higher for TiColl-functionalised screws in comparison to Ti screws (+23 %) at 12 weeks. Histomorphometric investigation revealed that total bone-to-implant contact was higher in TiColl screws in comparison to Ti screws (P < 0.05) and at epiphyseal level, increased bone-to-implant contact was found with TiColl screws in comparison to Ti screws (P < 0.05) in an ovariectomy (OVX) condition. A significant increase in the measured total bone ingrowth from four to 12 weeks was detected for both materials, but more significant for the TiColl material (P < 0.0005). Finally, bone ingrowth in the TiColl group was significantly higher (P < 0.005) in comparison to that of Ti screws in the SHAM condition at metaphyseal level at 12 weeks., Conclusion: The present results showed that TiColl is effective in promoting implant osteointegration even in compromised bone.

The paper presents results of physico-chemical and biological investigations of a surface-engineered synthetic bone filler. Surface analysis confirms that the ceramic phosphate granules present a collagen nanolayer to the surrounding environment. Cell cultures tests show that, in agreement with literature reports, surface-immobilized collagen molecular cues can stimulate progression along the osteogenic pathway of undifferentiated human mesenchymal cells. Finally, in vivo test in a rabbit model of critical bone defects shows statistically significant increase of bone volume and mineral apposition rate between the biomimetic bone filler and collagen-free control. All together, obtained data confirm that biomolecular surface engineering can upgrade the properties of implant device, by promoting more specific and targeted implant-host cells interactions.

Osteoimmunology is the crosstalk between cells from the immune and skeletal systems, suggesting a role of pro-inflammatory cytokines in the stimulation of osteoclast activity. Endotoxin or bacterial challenges to inflammatory cells are directly relevant to dental implant pathologies involving bone resorption, such as osseointegration failure and peri-implantitis. While the endotoxin amount on implant devices is regulated by standards, it is unknown whether commercially available dental implants elicit different levels of adherent-endotoxin stimulated cytokines. The objective of this work is to develop a model system and evaluate endotoxin-induced expression of pro-inflammatory cytokine genes relevant to osteoclast activation on commercially available dental implants. Murine J774-A1 macrophages were cultured on Ti disks with different level of lipopolysaccharide (LPS) contamination to define the time-course of the inflammatory response to endotoxin, as evaluated by reverse transcription polymerase chain reaction analysis. The developed protocol was then used to measure adherent endotoxin on commercially available packaged and sterile dental implants in the "as-implanted" condition. Results show that tested dental implants induce variable expression of endotoxin-stimulated genes, sometimes above the level expected to promote bone resorption in vivo. Results are unaffected by the specific surface treatment; rather, they likely reflect care in cleaning and packaging protocols. In conclusion, expression of genes that enhance osteoclast activity through endotoxin stimulation of inflammatory cells is widely different on commercially available dental implants. A reappraisal of the clinical impact of adherent endotoxins on dental (and bone) implant devices is required in light of increasing knowledge on crosstalk between cells from the immune and skeletal systems.

The aim of the study was to standardize the pellet cryopreservation procedure for chicken semen. Mericanel della Brianza male chicken breeders (Italian breed) were used. Pooled semen samples were processed according to the following conditions: (1) dilution in prefreezing extender to 1 versus 1.5 bill cells/mL sperm working concentration (SWC); (2) 6% versus 9% dimethyl acetamide (DMA) concentration (DMAco); (3) 1 versus 30 minutes DMA equilibration (DMAeq) at 4 °C. Sperm viability and motility were assessed in semen (four replicates/treatment) soon after collection (time 0), after DMAeq (time D), and after freezing/thawing (time FT). The recovery rates (%) of viable and motile sperm after freezing/thawing were also calculated. The low SWC (1 bill/mL) and the low DMAco (6%) indicated a positive significant effect on the proportion of motile sperm (1 bill/mL = 53% vs. 1.5 bill/mL = 48%; 6% DMA = 55% vs. 9% DMA = 47%). Very short DMAeq (1 minute) did not significantly change sperm viability during processing (from time 0 to time D) before freezing whatever the DMAco, and, in contrast, the longer DMAeq showed a significant negative effect on sperm viability. The highest proportion of motile sperm was recorded in semen samples diluted to 1 bill/mL and added with 6% DMA; in this condition, DMAeq had no effect (57% 1 minute and 61% 30 minutes). Increasing SWC to 1.5 bill/mL and adding again 6% DMA, a significant effect of DMAeq was observed, and the higher proportion of motile sperm (58% vs. 43%) was recorded after 1 minute DMAeq. A general decrease in sperm motility was shown in semen samples with 9% DMA (47% vs. 55%), and different conditions in SWC and DMAeq were not effective in the prevention of such decrease., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Purpose: This study was conducted to analyze how a cleaning treatment using plasma of argon would affect fibroblast growth on titanium disks at different time points to determine whether this treatment could enhance soft tissue healing around titanium dental implant abutments., Materials and Methods: Sixty sterile disks made of machined grade 5 titanium were divided into two groups; 30 disks were left untreated (control) and 30 were cleaned using plasma of argon (test). To simulate clinical conditions during soft tissue healing around titanium abutments, both groups were immersed in a culture of murine fibroblasts (L929) for 2, 8, or 48 hours. After preparation, they were stained using 4',6-diamidino-2-phenylindole dihydrochloride (DAPI) to label the cellular nuclei and fluorescent phalloidin to label the cellular bodies. The nuclei were counted, and cellular bodies were analyzed with fluorescent microscopy and imaging analysis software. Analysis was performed at the three different time points., Results: Fibroblast adhesion for the test group was statistically significantly greater versus the control group at 2 and 8 hours but not at 48 hours. At 2 and 8 hours, the cellular bodies in the test group appeared flatter and more spread out, revealing more advanced cellular adhesion, compared to the cells observed in the control group. At 48 hours, the test and control specimens were nearly indistinguishable., Conclusion: The removal of organic and inorganic contaminants from the surfaces of titanium disks using plasma of argon accelerated fibroblast adhesion in the early stages of colonization (2 to 8 hours). This effect disappeared after 48 hours as a result of saturation. Clinically, abutment cleaning using plasma of argon might positively affect soft tissue healing in early stages.

Background and Objective: In the field of bone implant surfaces, the effects of nanoscale modifications have received significant attention. In the present study, bone cell activity on 2 implant surfaces with similar microtopography but distinct chemistry and nanotopography (sandblasted/acid-etched surface as control group, and calcium phosphate (CaP) low impregnated surface (Ossean) as test group, both from Intra-Lock, Boca Raton, FL) were evaluated., Study Design: The 2 surfaces were characterized by X-ray photoelectronic spectroscopy (XPS) and scanning electron microscopy (SEM) up to x200,000 magnification. The micrometer level roughness profiles were evaluated by means of computer software. Cell adhesion, proliferation, and alkaline phosphatase activity were assessed with human SaOS-2 osteoblasts and bone mesenchymal stem cells in nonosteogenic culture conditions., Results: The XPS and SEM results showed that the Ossean surface presented low levels of CaP impregnation within the titanium oxide layer and texturization at the nanometer scale (nanoroughness) compared with the control surface. Moreover Ossean surface induced significantly higher cell differentiation levels than the control (P < .01)., Conclusion: This study showed that both homogeneous nanoroughness and CaP low impregnation differently affected in vitro bone cell behavior compared with the control moderately rough surface with less texturing in the nanometer scale. However, the relative importance of nanotopography and surface chemistry in cell reactions is yet to be determined., (Copyright (c) 2010 Mosby, Inc. All rights reserved.)

Bone integration of orthopaedic or dental implants and regeneration of damaged bone at the surgical site are still unresolved problems in prosthetic surgery. For this reason, biomimetic surfaces (i.e. both inorganic and biological bioactive surfaces) represent a challenge for bone implantation. In this research work a hydrolase enzyme (alkaline phosphatase) was covalently grafted to inorganic bioactive glass and glass ceramic surfaces, in order to impart biological bioactivity. The functionalized samples were analysed by means of X-ray photoelectron spectroscopy in order to verify enzyme presence on the surface. Enzyme activity was measured by means of UV-visual spectroscopy after reaction with the natural substrate. Scanning electron microscopy-energy-dispersive spectroscopy observations allowed monitoring of the morphological and chemical modification of the materials during the different steps of functionalization. In vitro inorganic bioactivity was investigated by soaking samples in simulated body fluid. Enzymatic activity of the samples was tested and compared before and after soaking. Enzymatic activity of the solution was monitored at different experimental times. This study demonstrates that alkaline phosphatase could be successfully grafted onto different bioactive surfaces while maintaining its activity. Presence of the enzyme in vitro enhances the inorganic bioactivity of the materials tested.

The goal of this study was the in vivo evaluation of nanoporous titanium (Ti) implants bearing a covalently linked surface hyaluronan (HA) layer. Implant surface topography and surface chemistry were previously evaluated by scanning electron microscopy and X-ray photoelectron spectroscopy. Results showed that the surface modification process did not affect surface topography, yielding a homogeneously HA-coated nanotextured implant surface. In vivo evaluation of implants in both cortical and trabecular bone of rabbit femurs showed a significant improvement of both bone-to-implant contact and bone ingrowth at HA-bearing implant interfaces at 4 weeks. The improvement in osteointegration rate was particularly evident in the marrow-rich trabecular bone (bone-to-implant contact: control 22.5%; HA-coated 69.0%, p < 0.01). Mechanical testing (push-out test) and evaluation of interfacial bone microhardness confirmed a faster bone maturation around HA-coated implants (Bone Maturation Index: control 79.1%; HA-coated 90.6%, p < 0.05). Suggestions based on the biochemical role of HA are presented to account for the observed behavior.

Previous work has reported the results of a multidisciplinary effort producing a proof-of-concept on the use of pectic polysaccharides in the surface modification of medical devices. This study was designed to learn more about the capability of engineered rhamnogalacturonan-I (RG-I) fractions of apple pectin to control bone cell and macrophage behavior. Thermanox or polystyrene Petri dishes were surface modified with two different modified hairy regions (MHRs) obtained by different enzymatic liquefaction processes of apples differing in relative amounts and lengths of their neutral side chains: (long-haired) MHR-alpha and (short-haired) MHR-B. Bone explants from 14-day-old chick embryos were cultured for 14 days on both pectic substrata. MHR-B promoted cell migration and differentiation, MHR-alpha did not. On MHR-alpha, J774.2 macrophages grew well, their percentage in G1 phase was decreased and in S phase increased, and they did not secrete either proinflammatory-cytokines or nitrites. Contrasting results were gained from macrophages on MHR-B, except for nitrite secretion. Thus, we conclude that coatings from tailored pectins show different biological activities in vitro and are potential innovative candidates for improving the biocompatibility of medical devices in various applications.

Improved biocompatibility and performance of biomedical devices can be achieved through the incorporation of bioactive molecules on device surfaces. Five structurally distinct pectic polysaccharides (modified hairy regions (MHRs)) were obtained by enzymatic liquefaction of apple (MHR-B, MHR-A and MHR-alpha), carrot (MHR-C) and potato (MHR-P) cells. Polystyrene (PS) Petri dishes, aminated by a plasma deposition process, were surface modified by the covalent linking of the MHRs. Results clearly demonstrate that MHR-B induces cell adhesion, proliferation and survival, in contrast to the other MHRs. Moreover, MHR-alpha causes cells to aggregate, decrease proliferation and enter into apoptosis. Cells cultured in standard conditions with 1% soluble MHR-B or MHR-alpha show the opposite behaviour to the one observed on MHR-B and -alpha-grafted PS. Fibronectin was similarly adsorbed onto MHR-B and tissue culture polystyrene (TCPS) control, but poorly on MHR-alpha. The Fn cell binding site (RGD sequence) was more accessible on MHR-B than on TCPS control, but poorly on MHR-alpha. The disintegrin echistatin inhibited fibroblast adhesion and spreading on MHR-B-grafted PS, which suggests that MHRs control fibroblast behaviour via serum-adhesive proteins. This study provides a basis for the design of intelligently-tailored biomaterial coatings able to induce specific cell functions.

Objectives: The objective of this study is to optimize the evaluation of the exposure to N,N-dimethylformamide (DMF) in synthetic leather factories by diffusive samplers. The DMF exposure was monitored in synthetic leather factories by two sampler types: active and diffusive., Methods: Air measurements were carried out using two different personal air samplers, a diffusive and an active one. The diffusive sampling method, TK200 with charcoal filters, was examined in comparison with pumping through NIOSH silica gel tubes workplace air as with the currently available "gold standard". The evaluation was carried out, in two different years but in the same season, for all the duration of the shift, i.e. 8 h on workers employed in five different factories in the district of Florence and Prato (Italy)., Results: The statistical and graphical analysis of data show a good correlation between active and passive samplers (r = 0.96, P < 0.001, n = 91), a good linear regression (DMF(diffusive )= 0.95 DMF(active) + 0.15, R (2) = 0.92), a not statistically significant difference between data (tested by paired t test and non-parametric Wilcoxon test). Moreover, all these results are confirmed for data lower and higher than TLV-TWA, in particular we found a significant Pearson correlation (r = 0.92, P < 0.001, n = 83; r = 0.92, P < 0.05, n = 8, respectively) and a significant linear regression (DMF(diffusive )= 0.88 DMF(active) + 0.73, R (2 )= 0.86; DMF(diffusive )= 0.90 DMF(active) + 3.76, R (2 )= 0.85). Besides, the analysis of graphical representations confirmed the previous evidences. Finally, we can not find a significant difference between different types of job., Conclusions: Due to the good agreement between the two groups of data, the TK200 samplers can be considered as a simpler approach than the pump for screening worker exposures to DMF.

Background: The aim of this study was to analyze the effects of erbium-doped:yttrium, aluminum, and garnet (Er:YAG) laser and ultrasonic treatment on fibroblast attachment to periodontally diseased root surfaces., Methods: Thirty single-rooted human periodontally involved teeth were included in this study. A total of 60 specimens were obtained from all selected teeth and were randomly assigned to the following three groups: group A, untreated control group; group B, ultrasonic group; and group C, Er:YAG laser at 160 mJ/pulse at 10 Hz group. All of the specimens were incubated in petri dishes with fibroblast suspension and observed by scanning electron microscopy., Results: Laser-treated specimens showed a significantly higher cell density number, with a mean+/-SD of 3,720+/-316 cells/mm2. The ultrasonically treated group showed a lower cell density number, with a mean+/-SD of 658+/-140 cells/mm2. The untreated control group showed the lowest cell density number, with a mean+/-SD of 130+/-80 cells/mm2. Differences between all groups were significant (P<0.0001)., Conclusion: The results of the study indicate that untreated control surfaces and ultrasonically treated surfaces exhibited a significantly lower number of attached cells compared to laser-treated specimens, which showed a significantly higher cell density number.

Purpose: The aim of this study was to evaluate the surface chemistry and the microhardness at the implant-bone interface using a recently developed collagen-coated titanium implant in a short-term rabbit model., Materials and Methods: Surface chemistry was evaluated by x-ray photoelectron spectroscopy (XPS), while in vivo studies involved 4-week implants mid-diaphysis in the lateral femurs of adult male rabbits. After conventional embedding and evaluation of histologic sections, the resinembedded blocks containing the implanted screws were used to measure bone hardness by means of an indentation test., Results: Decomposition of the C1s peak obtained by XPS analysis confirmed that surface-immobilized collagen retained all the molecular features of the control, nonimmobilized reference. As to microhardness measurement, newly formed bone at the collagen-coated-implant/bone interface was significantly harder than bone at the interface of the uncoated control implant and bone., Discussion: These results suggested that collagen coating significantly improves bone maturation and mineralization at the interface in comparison with uncoated commercially pure titanium. Surface modification of titanium implants by collagen coating has recently been discussed as a promising approach to the biochemical modification of implant surfaces. The present results support previous histologic findings and demonstrated that the biomolecular layer linked over the titanium implant can increase the bone healing rate, at least in this animal model., Conclusions: The present microhardness measurement at the bone-implant interface showed that collagen coating can significantly improve bone maturation and mineralization at the interface in comparison with uncoated commercially pure titanium, confirming and substantiating previous findings by histomorphometric measurements from the same model.

The use of biodegradable polymers for drug delivery systems excluded the need for a second operation to remove the carrier. However, the development of an avascular fibrous capsule, reducing drug release, has raised concern about these polymers in terms of tissue-implant reaction. Five novel polymers were evaluated in vivo after implantation in the rat dorsal subcutis and compared to the reference polycaprolactone (PCL). Poly(cyclohexyl-sebacate) (PCS), poly(L-lactide-b-1,5-dioxepan-2-one-b-L-lactide) (PLLA-PDXO-PLLA), two 3-hydroxybutyrate-co-3-hydroxyvalerate copolymers (D400G and D600G), and a poly(organo)phosphazene (POS-PheOEt:Imidazole) specimens were histologically evaluated in terms of the inflammatory tissue thickness and vascular density at 4 and 12 weeks from surgery. The highest values of inflammatory tissue thickness were observed in D600G (P < 0.01), PCS (P < 0.001) and PLLA-PDXO-PLLA (P < 0.001) at 4 weeks, while POP-PheOEt:Imidazole showed the lowest value of inflammatory tissue thickness (P < 0.05) at 12 weeks. D400G, D600G, PLLA-PDXO-PPLA and POP-PheOEt:Imidazole showed higher (P < 0.001) values of vascular density near the implants in comparison to PCL at 4 weeks. Finally, D400G and D600G increased their vessel densities while POP-PheOEt:Imidazole and the synthetic polyester PLLA-PDXO-PLLA presented similar vessel density values during experimental times. These different behaviours to improve neoangiogenesis without severe inflammatory tissue-responses could be further investigated with drugs in order to obtain time-programmable drug delivery systems for musculoskeletal therapy.

Collagen was covalently linked to the surface of Titanium (Ti) by a surface modification process involving deposition of a thin film from hydrocarbon plasma followed by acrylic acid grafting. The composition and properties of surface-modified Ti were investigated by a number of surface sensitive techniques: XPS, ATR-IR, atomic force microscopy and AFM force-separation curves. In vitro tests were performed to check samples cytotoxicity and the behavior of osteoblast-like SaOS-2 cells. In vivo experiments involved 12 weeks implants in rabbit muscle as general biocompatibility assessment and 1-month implants in rabbit bone to evaluate the effect of surface modification on osteointegration rate. Results of XPS measurements show how surface chemistry is affected throughout each step of the surface modification process, finally leading to a complete and homogeneous collagen overlayer on top of the Ti samples. AFM data clearly display the modification of the surface topography and of the surface area of the samples as a consequence of the grafting and coupling process. AFM force-distance curves show that the interfacial structure responds by shrinking or swelling to variations of ionic force of the surrounding aqueous environment, suggesting that the aqueous interface of the biochemically modified Ti samples has enhanced degrees of freedom as compared to the inorganic surface of plain Ti. As to biological evaluations, the biochemically modified Ti samples are safe in terms of cytotoxicity and in vivo biocompatibility assessment. SaOS-2 cells growth rate is lower on collagen modified surfaces, and no significant difference is detected in terms of alkaline phosphatase production as compared to control Ti. Importantly, implants in rabbit femur show a significant increase of bone growth and bone-to-implant contact in the case of the collagen modified samples, confirming that biochemical modifications of Ti surface can enhance the rate of bone healing as compared to plain Ti.

Hyaluronan (HA) was immobilized on aminated glass surfaces in three different ways: by simple ionic interaction and by covalent linking at low density and at full density. In agreement with previous reports, in vitro experiments show that the outcome of fibroblast adhesion tests is markedly affected by the details of the coupling procedure, suggesting that different interfacial forces are operating at the aqueous/HA interface in the three cases investigated. The interfacial properties of the HA-coated surfaces were probed by force-distance curves obtained with the atomic force microscope (AFM). This approach readily shows significant differences among the tested samples, which are directly related to the coupling strategy and to results of cell adhesion tests. In particular, the range of interaction between the tip and the surface is much lower when HA is covalently linked than when it is ionically coupled, suggesting a more compact surface structure in the former case. Increasing HA surface density minimizes the interaction force between the surface and the AFM tip, likely reflecting more complete shielding by the HA chains of the underlying substrate. In summary, these measurements clearly show the different nature of the aqueous interfaces tested, and underline the role of this analytical approach in the development and control of finely tuned biomaterial surfaces.

Aim: The aim of this study was to evaluate the behaviour of titanium (Ti) in precipitant condition, and more precisely the resistance against corrosion of Ti in presence of fluorides and the electrochemical interaction between Ti- amalgam couples in fluorinated solution., Methods: The experimental test was made with the use of an electrochemical cell. The following materials were tested: commercially pure Ti and 2 types of amalgams, the Persistalloy (Prs) and the IQC. Palladium (IQC.P). The free corrosion potential of Ti and the amalgams, the polarization curves of both amalgams and the corrosion current of the Ti-amalgam couples in the measurements were performed in 3 different electrolytic solutions: Ringer solution, fluorinated neutral Ringer solution and acid fluorinated solution. The three corrosive media are described., Results: The results showed that Ti could be damaged by the presence of fluorides with an acid pH: Ti potential becomes more negative in acid fluorinated solution. The corrosion currents between Ti and amalgam couples were considered: the amalgams underwent anodic oxidation in neutral Ringer, but a reversal phenomenon occurred in the fluorinated acid solution: Ti was damaged and the amalgams both Prs and IQC.P became the cathodic partner of the couple. In neutral fluorinated solution the IQC.P amalgam induced a significantly higher corrosion of Ti, when compared to the Prs one., Conclusion: Results clearly show the dependence of the Ti corrosion behaviour on the pH and composition of the solution and that the outcome of the damage is affected by the composition of other metals.

Purpose: To analyze the surface composition of 34 different commercially available titanium dental implants., Materials and Methods: Surface composition was evaluated by x-ray photoelectron spectroscopy (XPS). Samples were divided into 4 groups, depending on their surface topography (machined, sandblasted, acid etched, or plasma sprayed)., Results: Statistical analysis of the data showed a clear relationship between surface composition and topography, which can be easily accounted for by the chemical effects of the surface treatment performed. On average, acid-etched and plasma-sprayed surfaces had higher titanium and lower carbon concentration than machined surfaces., Discussion and Conclusion: Current studies aimed at the evaluation of implants with different topography should not implicitly assume that topography is the only variable controlling the biologic response. Rather, when comparing different topographies, it should be taken into account that surface chemistry may be a variable as well.