Search

Background: The extent of intraductal carcinoma in situ (DCIS) is commonly underestimated due to the discontinuous growth and lack of microcalcifications. Specimen radiography has been established to reduce the rate of re-excision. However, the predictive value for margin assessment with conventional specimen radiography for DCIS is low. In this study we assessed the potential of grating-based phase-contrast computed tomography (GBPC-CT) at conventional X-ray sources for specimen tomography of DCIS containing samples. Materials and methods: GBPC-CT was performed on four ex-vivo breast specimens containing DCIS and invasive carcinoma of non-specific type. Phase-contrast and absorption-based datasets were manually matched with corresponding histological slices as the standard of reference. Results: Matching of CT images and histology was successful. GBPC-CT showed an improved soft tissue contrast compared to absorption-based images revealing more histological details in the same sections. Non-calcifying DCIS exceeding the invasive tumor could be correlated to areas of dilated bright ducts around the tumor. Conclusions: GBPC-CT imaging at conventional X-ray sources offers improved depiction quality for the imaging of breast tissue samples compared to absorption-based imaging, allows the identification of diagnostically relevant tissue details, and provides full three-dimensional assessment of sample margins. [ABSTRACT FROM AUTHOR]

To further reduce the noise and artifacts in the reconstructed image of sparse-view CT, we have modified the traditional total variation (TV) methods, which only calculate the gradient variations in x and y directions, and have proposed 8- and 26-directional (the multi-directional) gradient operators for TV calculation to improve the quality of reconstructed images. Different from traditional TV methods, the proposed 8- and 26-directional gradient operators additionally consider the diagonal directions in TV calculation. The proposed method preserves more information from original tomographic data in the step of gradient transform to obtain better reconstruction image qualities. Our algorithms were tested using two-dimensional Shepp–Logan phantom and three-dimensional clinical CT images. Results were evaluated using the root-mean-square error (RMSE), peak signal-to-noise ratio (PSNR), and universal quality index (UQI). All the experiment results show that the sparse-view CT images reconstructed using the proposed 8- and 26-directional gradient operators are superior to those reconstructed by traditional TV methods. Qualitative and quantitative analyses indicate that the more number of directions that the gradient operator has, the better images can be reconstructed. The 8- and 26-directional gradient operators we proposed have better capability to reduce noise and artifacts than traditional TV methods, and they are applicable to be applied to and combined with existing CT reconstruction algorithms derived from CS theory to produce better image quality in sparse-view reconstruction. [ABSTRACT FROM AUTHOR]

The purposes of this study were as follows: (1) to radiolabel ibandronic acid (IBA, a third‐generation bisphosphonate) with 177Lu, investigating optimal labeling conditions, and (2) to analyze biodistribution and imaging properties of intravenous 177Lu‐ibandronate (177Lu‐IBA) administered in animals. 177Lu‐labeled methylene diphosphonate (177Lu‐MDP) served as a comparator agent. Differing proportions of IBA solution and 177LuCl3 solution were combined to determine an optimal ratio for radiolabeling purposes, varying pH, temperature, and time to establish ideal reactivity conditions. Radiochemical purity of the labeled compounds was then assessed by paper chromatography. In vitro and in vivo stabilities were also measured at specific time intervals. In Kunming mice, biodistributions of 177Lu‐IBA and 177Lu‐MDP and respective agent activities in various organs were monitored by gamma counter, and we performed single photon computed tomography/computed tomography (SPECT/CT) imaging of 177Lu‐IBA in normal New Zealand White rabbits. Radiolabeling yields for 177Lu‐IBA proved to be >97% within 30 minutes at 90°C, and its radiochemical purity ensured stability in vitro and in vivo. Furthermore, we found that 177Lu‐IBA is readily soluble in water, showing higher skeletal uptake than 177Lu‐MDP but lower uptake by liver and spleen. The image quality of 177Lu‐IBA was so clear that even after 6 days, analysis was still feasible. To develop a new efficient and safe bone‐seeking radiopharmaceutical, 177Lu‐ibandronate, for bone pain palliation, which could be used for the purposes of both treatment and monitoring of the patient's condition. [ABSTRACT FROM AUTHOR]

The lacuno-canalicular network (LCN) hosting the osteocytes in bone tissue represents a biological signature of the mechanotransduction activity in response to external biomechanical loading. Using third-harmonic generation (THG) microscopy with sub-micrometer resolution, we investigate the impact of microgravity on the 3D LCN structure in mice following space flight. A specific analytical procedure to extract the LCN characteristics from THG images is described for ex vivo studies of bone sections. The analysis conducted in different anatomical quadrants of femoral cortical bone didn’t reveal any statistical differences between the control, habitat control and flight groups, suggesting that the LCN connectivity is not affected by one month space flight. However, significant variations are systematically observed within each sample. We show that our current lack of understanding of the extent of the LCN heterogeneity at the organ level hinders the interpretation of such investigations based on a limited number of samples and we discuss the implications for future biomedical studies. [ABSTRACT FROM AUTHOR]

This study used available or purchased equipment and an image reconstruction system developed by the college of dentistry to establish a basic self-assembled micro-computed tomography (micro-CT) system. Such a system would be suitable for teaching dental radiology to dental students. Specifically, it could help students to understand the principles governing dental cone-beam computed tomography (CBCT) and provide graduate students with a system for scanning small samples (e.g., individual teeth) during the early stages of research. The self-assembled micro-CT system was constructed using a portable dental X-ray tube, an intraoral digital X-ray detector, a high-precision rotation stage, related bracket accessories, and a notebook computer. Reconstructed images and three-dimensional models of the maxillary right third molar were produced using the self-assembled micro-CT system and an advanced commercially available micro-CT system (Skyscan 2211). Subsequently, the reconstructed images and 3D models produced using the two systems were compared by two senior dentists to determine whether considerable visual differences could be observed. Finally, the signal-to-noise ratio (SNR) was used for quantitative analysis and to compare the systems. Although the self-assembled micro-CT system produced image boundaries that were not as sharp as those of Skyscan 2211, the images were nonetheless remarkably similar. In addition, the two micro-CT systems produced 3D models that were almost identical in appearance and root canal shape. Quantitative analysis revealed that Skyscan 2211 had produced a SNR that was superior to that of the self-assembled micro-CT system, with the difference ranging from 36.77% to 136.22%; enamel, which has a higher density, exhibited lower SNR differences, whereas dentin, which has a lower density, exhibited higher SNR differences. The self-assembled micro-CT system with a resolution of 36 μm was created using a portable dental X-ray tube and an intraoral digital X-ray detector. Although the scanning time was relatively long (~30 min to scan images of a tooth), the images were adequate in the preliminary stage of experiments. More importantly, students were afforded the opportunity to observe the process of assembling and disassembling each component of a micro-CT scanner and thereby achieve a more comprehensive understanding of the principles governing micro-CT and dental CBCT. [ABSTRACT FROM AUTHOR]

Introduction: [68Ga]PSMA-HBED-CC and [18F]DCFPyL show a high potential for the detection of recurrent prostate cancer. While 18F-based tracers have several advantages in availability and image resolution, their sensitivity in the skeleton might be impaired by released [18F]fluoride due to its high bone affinity. In turn, chemically unbound trivalent 68Ga might also accumulate in osseous tissue, in cases of occupied binding sites of plasma proteins and thereby influence bone signal. Methods: A comparison of average bone SUV was performed in 17 bone-negative and 4 bone-positive patients. All patients underwent PET/CT 125 minutes after application of [18F]DCFPyL and 73 minutes after application of [68Ga]PSMA-HBED-CC at another date. Results: Native SUVs in unaffected bone tissue and SUVs relative to liver uptake were lower in [18F]DCFPyL (0.49) than in [68Ga]PSMA-HBED-CC scans (0.52). SUVs relative to gluteal muscles did not differ between the two tracers. Average lesional SUVs did not differ between tracers. Conclusion: No difference of average bone signal intensity was observed for [18F]DCFPyL-PET/CT in comparison to [68Ga]PSMA-HBED-CC scans indicating that diagnostic assessment of the skeleton is not affected by non-specific accumulation of free [18F]fluoride or 68Ga. [ABSTRACT FROM AUTHOR]

Purpose: This paper lays the groundwork for linking Hounsfield unit measurements to the International System of Units (SI), ultimately enabling traceable measurements across X-ray CT (XCT) machines. We do this by characterizing a material basis that may be used in XCT reconstruction giving linear combinations of concentrations of chemical elements (in the SI units of mol/m3) which may be observed at each voxel. By implication, linear combinations not in the set are not observable. Methods and materials: We formulated a model for our material basis with a set of measurements of elemental powders at four tube voltages, 80 kV, 100 kV, 120 kV, and 140 kV, on a medical XCT. The samples included 30 small plastic bottles of powders containing various compounds spanning the atomic numbers up to 20, and a bottle of water and one of air. Using the chemical formulas and measured masses, we formed a matrix giving the number of Hounsfield units per (mole per cubic meter) at each tube voltage for each of 13 chemical elements. We defined a corresponding matrix in units we call molar Hounsfield unit (HU) potency, the difference in HU values that an added mole per cubic meter in a given voxel would add to the measured HU value. We built a matrix of molar potencies for each chemical element and tube voltage and performed a singular value decomposition (SVD) on these to formulate our material basis. We determined that the dimension of this basis is two. We then compared measurements in this material space with theoretical measurements, combining XCOM cross section data with the tungsten anode spectral model using interpolating cubic splines (TASMICS), a one-parameter filter, and a simple detector model, creating a matrix similar to our experimental matrix for the first 20 chemical elements. Finally, we compared the model predictions to Hounsfield unit measurements on three XCT calibration phantoms taken from the literature. Results: We predict the experimental HU potency values derived from our scans of chemical elements with our theoretical model built from XCOM data. The singular values and singular vectors of the model and powder measurements are in substantial agreement. Application of the Bayesian Information Criterion (BIC) shows that exactly two singular values and singular vectors describe the results over four tube voltages. We give a good account of the HU values from the literature, measured for the calibration phantoms at several tube voltages for several commercial instruments, compared with our theoretical model without introducing additional parameters. Conclusions: We have developed a two-dimensional material basis that specifies the degree to which individual elements in compounds effect the HU values in XCT images of samples with elements up to atomic number Z = 20. We show that two dimensions is sufficient given the contrast and noise in our experiment. The linear combination of concentrations of elements that can be observed using a medical XCT have been characterized, providing a material basis for use in dual-energy reconstruction. This approach provides groundwork for improved reconstruction and for the link of Hounsfield units to the SI. [ABSTRACT FROM AUTHOR]

Analytical CT reconstruction is popular in practice because of its computational efficiency, but it suffers from low reconstruction quality when an insufficient number of projections are used. To address this issue, this paper presents a new analytical method of backprojection Wiener deconvolution (BPWD). BPWD executes backprojection first, and then applies a Wiener deconvolution to the whole backprojected image. The Wiener filter is derived from a ramp filter, enabling the proposed approach to perform reconstruction and denoising simultaneously. The use of a filter after backprojection does not differentiate between real sampled projections and interpolated ones, introducing reconstruction errors. Therefore a weighted ramp filter was applied to increase the contribution of real sampled projections in the reconstruction, thus improving reconstruction quality. Experiments on synthetic data and real phase-contrast x-ray images showed that the proposed approach yields better reconstruction quality compared to the classical filtered backprojection (FBP) method, with comparable reconstruction speed. [ABSTRACT FROM AUTHOR]

Background: Metastasis and multiple myeloma are common malignant bone marrow lesions which may be difficult to distinguish because of similar imaging findings. The purpose of this study was to determine the value of adding diffusion-weighted imaging (DWI) to standard MR imaging to differentiate multiple myeloma from metastasis. Methods: 25 patients with metastasis and 18 patients with multiple myeloma underwent 3T MR imaging with DWI (b = 0, 800 s/mm2) were enrolled. They all had pathologically confirmed bone lesions and were in a treatment naïve state. Two readers who were blind of final diagnosis measured the average ADC (ADCav) and minimum ADC (ADCmin) on the DWI. They then estimated the diagnosis, based on the standard MR imaging and measured ADC values. Another reader performed histogram analysis on the whole tumor volume and obtained mean ADC (ADCvol), standard deviation (SDvol), skewness, and kurtosis. Comparison of the obtained values from DWI was performed by the t-test or Mann-Whitney U test. The receiver operating characteristic (ROC) curve with areas under the curve (AUC) was used to obtain the cut off values and to evaluate the diagnostic performance of the two readers. Results: ADCav, ADCmin, and ADCvol of multiple myeloma were significantly lower than those of metastasis: ADCav, 752 μm2/sec versus 1081 μm2/sec; ADCmin, 704 μm2/sec vs 835 μm2/sec; ADCvol 761 μm2/sec vs 1184 μm2/sec (p < .001). In histogram analysis, ADC values of multiple myeloma showed narrow distribution than metastasis: SDvol, 144 vs 257 (p < .001). Areas under the receiver operating characteristic curve was significantly higher with additive DWI than standard MR alone: 0.762 vs 0.953; 0.706 vs 0.950 (p < .05) for two readers. Conclusions: This study suggested that the addition of axial DWI to standard MR imaging can be helpful to diagnose multiple myeloma from metastasis at 3T. [ABSTRACT FROM AUTHOR]

About one third of all deaths worldwide can be traced back to cardiovascular diseases. An interventional radiology procedure for their diagnosis is Digital Subtraction Angiography (DSA). An alternative to DSA is K-Edge subtraction (KES) imaging, which has been shown to be advantageous for moving organs and eliminating image artifacts caused by patient movement. As highly brilliant, monochromatic X-rays are required for this method, it has been limited to synchrotron facilities so far, restraining the feasibility in clinical routine. Compact synchrotron X-ray sources based on inverse Compton scattering, which have been evolving substantially over the past decade, provide X-rays with sufficient brilliance that meet spatial and financial requirements affordable in laboratory settings or for university hospitals. In this work, we demonstrate a first proof-of-principle K-edge subtraction imaging experiment using the Munich Compact Light Source (MuCLS), the first user-dedicated installation of a compact synchrotron X-ray source worldwide. It is shown experimentally that the technique of KES increases the visibility of small blood vessels overlaid by bone structures. [ABSTRACT FROM AUTHOR]

Purpose: Metastatic brain tumors pose a severe problem in the treatment of patients with breast carcinoma. Preclinical models have been shown to play an important role in unraveling the underlying mechanisms behind the metastatic process and evaluation of new therapeutic approaches. As the size of the rat brain allows improved in vivo imaging, we attempted to establish a rat model for breast cancer brain metastasis that allows follow-up by 7 tesla (7T) preclinical Magnetic Resonance Imaging (MRI). Procedures: Green fluorescent protein-transduced (eGFP) MDA-MB-231br breast cancer cells were labeled with micron-sized particles of iron oxide (MPIOs) and intracardially injected in the left ventricle of female nude rats and mice. 7T preclinical MRI was performed to show the initial distribution of MPIO-labeled cancer cells and to visualize metastasis in the brain. Occurrence of potential metastasis outside the brain was evaluated by 2-deoxy-2-[18F]fluoro-D-glucose ([18F]FDG) positron emission tomography (PET)/computed tomography (CT) and potential bone lesions were assessed using [18F]sodium fluoride ([18F]NaF) PET/CT. Results: The first signs of brain metastasis development were visible as hyperintensities on T2-weighted (T2w) MR images acquired 3 weeks after intracardiac injection in rats and mice. Early formation of unexpected bone metastasis in rats was clinically observed and assessed using PET/CT. Almost no bone metastasis development was observed in mice after PET/CT evaluation. Conclusions: Our results suggest that the metastatic propensity of the MDA-MB-231br/eGFP cancer cell line outside the brain is species-dependent. Because of early and abundant formation of bone metastasis with the MDA-MB-231br/eGFP cancer cell line, this rat model is currently not suitable for investigating brain metastasis as a single disease model nor for evaluation of novel brain metastasis treatment strategies. [ABSTRACT FROM AUTHOR]

Sugarcane bagasse is a vast lignocellulosic byproduct generated in the industry with ~50% humidity (1 kg dry matter associated with 1 kg water). Although the presence of water brings deleterious consequences for combustion, storage and sugar extraction, the location of water in fresh bagasse remains unknown. In this work, we use synchrotron X-ray microtomography for non-invasive 3D imaging of fresh bagasse particles, which allows the visualization of intraparticle water. The sclerified fiber cells in the sheaths surrounding xylem vessels are often found full of water. We suggest this can be juice preserved from the native stalks as many sclerified fibers seem to keep their structural integrity despite the mechanical action during sugarcane crushing. The microtomograms of fresh bagasse also shows mineral particles adhered to biomass surfaces, with adhesion presumably favored by the presence of water. In summary, this work unveils the location of water in fresh bagasse, solving an old mystery of sugarcane technology. [ABSTRACT FROM AUTHOR]

The mechanical behavior of long bones and fractures has been under investigation for many decades due to its complexity and clinical relevance. In this paper, we report a new subject-specific methodology to predict and analyze the mechanical behavior of the soft tissue at a bone interface with the intent of identifying the presence and location of bone abnormalities with high accuracy, spatial resolution, and contrast. The proposed methodology was tested on both intact and fractured rabbit femur samples with finite element-based 3-D simulations, created from actual femur computed tomography data, and ultrasound elastography experiments. The results included in this study demonstrate that elastographic strains at the bone/soft tissue interface can be used to differentiate fractured femurs from the intact ones on a distribution level. These results also demonstrate that coronal plane axial shear strain creates a unique contrast mechanism that can be used to reliably detect fractures (both complete and incomplete) in long bones. Kruskal–Wallis test further demonstrates that the contrast measure for the fracture group (simulation: 2.1286±0.2206; experiment: 2.7034 ± 1.0672) is significantly different from that for the intact group (simulation: 0 ± 0; experiment: 1.1540±0.6909) when using coronal plane axial shear strain elastography ($p$ < 0.01). We conclude that: 1) elastography techniques can be used to accurately identify the presence and location of fractures in a long bone and 2) the proposed model-based approach can be used to predict and analyze strains at a bone fracture site and to better interpret experimental elastographic data. [ABSTRACT FROM AUTHOR]

The typical giant cell tumor (GCT) is a solitary neoplams that occurs in the epiphysis or epimetaphysis of long bones. GCT is seen with a slightly increased frequency in females, and 70% of patients are between 20 and 40 years of age at the time of presentation. Multicentric giant cell tumor (MGCT; two or more centers) is an unusual variant of GCT. Patients with MGCT are likely to be younger than those with a solitary lesion. The multicentric variety is often of a higher stage at diagnosis and is more often associated with a pathological fracture than the unifocal tumor. We are reporting five new cases of MGCT, with a total of 21 tumors seen over a period of 25 years from 1967 to 1992.

The bacterium Sporosarcina pasteurii can produce significant volumes of solid precipitation in the presence of specific chemical environments. These solid precipitate particles can enter a network of microscale pores and cause long-range clogging. As a result, the medium gains strength and exhibits superior mechanical properties. This concept is also known as Microbiologically Induced Calcite Precipitation (MICP). In this study, we have used sponge blocks as surrogate porous media mimics and analyzed several aspects of MICP. A synergistic approach involving electron microscopy (SEM), computerized X-Ray tomography (μCT), quasi-static compressive load testing and chemical characterization (EDX) has been used to understand several physical and chemical aspects of MICP. [ABSTRACT FROM AUTHOR]

This paper presents the histological characterisation of a selection of worked bone artefacts from Middle Stone Age layers at Sibudu cave, South Africa. Histographic rendering is achieved using high-resolution Computed Tomography, which is non-destructive and facilitates three-dimensional histologic analysis. Excellent congruency in image quality was achieved with previous studies using this method. The results show that most of the artefact fragments contain mostly primary lamellar tissue, which is the bone tissue best adapted to withstand impact stresses. This indicates that bone with greater elastic properties was chosen. Histological characterisation allows the identification of animal taxa. Based on the sample analysed in this paper, Perissodactyla bone was used predominantly in the older layers at the site. Artiodactyla are represented throughout but appear far more frequently in the later (post-Howiesons Poort onwards) layers. Some of the Artiodactyla specimens have high proportions of Haversian tissue, reducing elasticity. The higher percentages of Haversian tissue in the post-Howiesons Poort artefacts relative to Holocene examples from southern Africa suggests that people may have started experimenting with bone from different animal taxa at this time and had not yet learned to eliminate the mechanically weaker secondary tissue. Apart from mechanical considerations, possible cultural constraints governing raw material selection is also explored. [ABSTRACT FROM AUTHOR]

Background: Pneumothorax can precipitate a life-threatening emergency due to lung collapse and respiratory or circulatory distress. Pneumothorax is typically detected on chest X-ray; however, treatment is reliant on timely review of radiographs. Since current imaging volumes may result in long worklists of radiographs awaiting review, an automated method of prioritizing X-rays with pneumothorax may reduce time to treatment. Our objective was to create a large human-annotated dataset of chest X-rays containing pneumothorax and to train deep convolutional networks to screen for potentially emergent moderate or large pneumothorax at the time of image acquisition.Methods and Findings: In all, 13,292 frontal chest X-rays (3,107 with pneumothorax) were visually annotated by radiologists. This dataset was used to train and evaluate multiple network architectures. Images showing large- or moderate-sized pneumothorax were considered positive, and those with trace or no pneumothorax were considered negative. Images showing small pneumothorax were excluded from training. Using an internal validation set (n = 1,993), we selected the 2 top-performing models; these models were then evaluated on a held-out internal test set based on area under the receiver operating characteristic curve (AUC), sensitivity, specificity, and positive predictive value (PPV). The final internal test was performed initially on a subset with small pneumothorax excluded (as in training; n = 1,701), then on the full test set (n = 1,990), with small pneumothorax included as positive. External evaluation was performed using the National Institutes of Health (NIH) ChestX-ray14 set, a public dataset labeled for chest pathology based on text reports. All images labeled with pneumothorax were considered positive, because the NIH set does not classify pneumothorax by size. In internal testing, our "high sensitivity model" produced a sensitivity of 0.84 (95% CI 0.78-0.90), specificity of 0.90 (95% CI 0.89-0.92), and AUC of 0.94 for the test subset with small pneumothorax excluded. Our "high specificity model" showed sensitivity of 0.80 (95% CI 0.72-0.86), specificity of 0.97 (95% CI 0.96-0.98), and AUC of 0.96 for this set. PPVs were 0.45 (95% CI 0.39-0.51) and 0.71 (95% CI 0.63-0.77), respectively. Internal testing on the full set showed expected decreased performance (sensitivity 0.55, specificity 0.90, and AUC 0.82 for high sensitivity model and sensitivity 0.45, specificity 0.97, and AUC 0.86 for high specificity model). External testing using the NIH dataset showed some further performance decline (sensitivity 0.28-0.49, specificity 0.85-0.97, and AUC 0.75 for both). Due to labeling differences between internal and external datasets, these findings represent a preliminary step towards external validation.Conclusions: We trained automated classifiers to detect moderate and large pneumothorax in frontal chest X-rays at high levels of performance on held-out test data. These models may provide a high specificity screening solution to detect moderate or large pneumothorax on images collected when human review might be delayed, such as overnight. They are not intended for unsupervised diagnosis of all pneumothoraces, as many small pneumothoraces (and some larger ones) are not detected by the algorithm. Implementation studies are warranted to develop appropriate, effective clinician alerts for the potentially critical finding of pneumothorax, and to assess their impact on reducing time to treatment. [ABSTRACT FROM AUTHOR]

Background: Detection of ossification areas of hand bones in X-ray images is an important task, e.g. as a preprocessing step in automated bone age estimation. Deep neural networks have emerged recently as de facto standard detection methods, but their drawback is the need of large annotated datasets. Finetuning pre-trained networks is a viable alternative, but it is not clear a priori if training with small annotated datasets will be successful, as it depends on the problem at hand. In this paper, we show that pre-trained networks can be utilized to produce an effective detector of ossification areas in pediatric X-ray images of hands. Methods and findings: A publicly available Faster R-CNN network, pre-trained on the COCO dataset, was utilized and finetuned with 240 manually annotated radiographs from the RSNA Pediatric Bone Age Challenge, which comprises over 14.000 pediatric radiographs. The validation is done on another 89 radiographs from the dataset and the performance is measured by Intersection-over-Union (IoU). To understand the effect of the data size on the pre-trained network, subsampling was applied to the training data and the training was repeated. Additionally, the network was trained from scratch without any pre-trained weights. Finally, to understand whether the trained model could be useful, we compared the inference of the network to an annotation of an expert radiologist. The finetuned network was able to achieve an average precision (mAP@0.5IoU) of 92.92 ± 1.93. Apart from the wrist region, all ossification areas were able to benefit from more data. In contrast, the network trained from scratch was not able to produce any correct results. When compared to the annotations of the expert radiologist, the network was able to localize the regions quite well, as the F1-Score was on average 91.85 ± 1.06. Conclusions: By finetuning a pre-trained deep neural network, with 240 annotated radiographs, we were able to successfully detect ossification areas in prediatric hand radiographs. [ABSTRACT FROM AUTHOR]

In vivo micro-computed tomography (micro-CT) can monitor longitudinal changes in bone mass and microstructure in small rodents but imposing high doses of radiation can damage the bone tissue. However, the effect of weekly micro-CT scanning during the adolescence on bone growth and architecture is still unknown. The right proximal tibia of male Sprague-Dawley rats randomized into three dose groups of 0.83, 1.65 and 2.47 Gy (n = 11/group) were CT scanned at weekly intervals from 4th to 12th week of age. The left tibia was used as a control and scanned only at the last time point. Bone marrow cells were investigated, bone growth rates and histomorphometric analyses were performed, and bone structural parameters were determined for both left and right tibiae. Radiation doses of 1.65 and 2.47 Gy affected bone marrow cells, heights of the proliferative and hypertrophic zones, and bone growth rates in the irradiated tibiae. For the 1.65 Gy group, irradiated tibiae resulted in lower BMD, Tb.Th, Tb.N and a higher Tb.Sp compared with the control tibiae. A decrease in BMD, BV/TV, Tb.Th, Tb.N and an increase in Tb.Sp were observed between the irradiated and control tibiae for the 2.47 Gy group. For cortical bone parameters, no effects were noticed for 1.65 and 0.83 Gy groups, but a lower Ct.Th was observed for 2.47 Gy group. Tibial bone development was adversely impacted and trabecular bone, together with bone marrow cells, were negatively affected by the 1.65 and 2.47 Gy radiation doses. Cortical bone microstructure was affected for 2.47 Gy group. However, bone development and morphometry were not affected for 0.83 Gy group. These findings can be used as a proof of concept for using the reasonable high-quality image acquisition under 0.83 Gy radiation doses during the adolescent period of rats without interfering with the bone development process. [ABSTRACT FROM AUTHOR]

Use-wear analysis provides a means of studying traces produced on animal bone during manufacture and use in an effort to reconstruct these processes. Often, these analyses are qualitative and based on experience and expertise. Previous studies have focused on interpreting final traces, but little is known about how these traces develop and change over time. We propose the use of an innovative quantitative method for studying bone surface traces that aims to reduce any unreliable or non-replicable results that can confound more traditional qualitative analyses. We seek to understand the basics of use-wear formation over Time by taking incremental molds of bone specimens subjected to a controlled, mechanical experiment. This study assesses how bone wears during extended use on three Material types (fresh skin, processed leather, or dry bark), from three initial Manufacturing states (unworked, ground with sandstone, or scraped with flint). With data obtained from a confocal disc-scanning microscope, we then apply 3D surface texture analysis using ISO 25178 parameters: surface roughness [Sa], autocorrelation length [Sal], peak curvature [Spc], and upper material ratio [Smr1]. We employ a multilevel multivariate Bayesian model to explain parameter variation under experimental conditions. Our findings show how duration of use strongly affects the transformation of the bone’s surface. Unworked bone is completely distinguishable from bone used for long time intervals and those modified by scraping. Interestingly, material wear does not often produce type-specific traces, but does affect the rate of bone alteration and how it is transformed. Specifically, fresh skin transforms bone at a faster rate than other materials. This novel quantitative and experimental approach enhances our understanding of the use of bone as a raw material for making and using tools and provides a foundation for future exploration of archaeological materials and questions. [ABSTRACT FROM AUTHOR]

The Antikythera Mechanism is an extraordinarily complex ancient Greek astronomical calculating device whose mode of operation is now relatively well understood particularly since imaging studies in 2005 revealed gears and inscriptions which were previously illegible. Unfortunately, the highest resolution X-ray computed tomography image of the largest fragment had some errors which meant that the reconstructed images were not as clear as had been expected. Here, the original X-ray data have been reanalysed and reconstructed. The new X-ray computed tomography images have improved contrast and resolution, leading to better clarity and legibility. The improvement in image quality is characterised and some examples of writing on the Mechanism which can now be read with increased confidence are given. [ABSTRACT FROM AUTHOR]

The purpose of this investigation was to determine the validity of 4-compartment (4C) model body fat percent (BF%) estimates when using dual energy x-ray absorptiometry (DXA) derived body volume (BV) equations (4C-DXA1 and 4C-DXA2) in adults with varying body mass index (BMI) and waist circumference (WC) classifications. Each model was compared to a criterion 4C model with air-displacement plethysmography (ADP) generated BV (4C-ADP). Participants were categorized as normal weight (n = 40; NW = BMI<25.0kg/m2); overweight (n = 40; OWBMI = BMI≥25.0 kg/m2); and overweight with at-risk WC (n = 35; OWBMI+WC = BMI≥25.0 kg/m2 and WC≥88.0cm for women and 102.0cm for men). 4C-DXA1 produced lower BF% than that derived using the 4C-ADP in NW (CE = -3.0%; p<0.001) while 4C-DXA2 was significantly higher (CE = 4.8%; p<0.001). The SEE and 95% limits of agreement (LOA) were lower for 4C-DXA2 (1.24% and ±2.5%, respectively) than 4C-DXA1 (2.59% and ±5.0%, respectively) and proportional bias was present for both (p<0.05). 4C-DXA1 BF% was not significant in OWBMI (CE = -0.5%; p = 0.112) whereas 4C-DXA2 was higher (CE = 4.5%; p<0.001). The SEE and 95% LOA were lower for 4C-DXA2 (1.20% and ±2.9%, respectively) than 4C-DXA1 (1.92% and ±3.9%, respectively) in OWBMI. Proportional bias was present for 4C-DXA1 (p = 0.007), but not 4C-DXA2 (p = 0.832). 4C-DXA1 and 4C-DXA2 produced significantly higher BF% in OWBMI+WC (CE = 2.2 and 2.3%, respectively; both p<0.001). The SEE and 95% LOA remained lower for 4C-DXA2 (1.15% and ±2.5%, respectively) than 4C-DXA1 (1.84% and ±3.8%, respectively). There was proportional bias for 4C-DXA2 (p = 0.020), but not 4C-DXA1 (p = 0.183) in OWBMI+WC. Only one prediction model (i.e., 4C-DXA1 in OWBMI+WC) revealed valid estimates of BF%. Practitioners are encouraged to use criteria for both BMI and WC when utilizing DXA-derived BV in 4C-models for normal and overweight populations. [ABSTRACT FROM AUTHOR]

Introduction: Pathological calcium-containing crystals accumulating in the joints, synovial fluid, and soft tissues are noted in most elderly patients, yet arthritic crystal formation remains idiopathic. Interestingly, elevated lactic acid and bone erosion are frequently among the comorbidities and clinical features of patients with highest incidence of crystal arthropathies. This work shows that bone particulates (modeling bone erosion) dissolve in lactic acid and directly generate crystals, possibly presenting a mechanism for crystal accumulation in osteoarthritis. Methods and results: Micronized human bone (average particle size of 160 μm x 79 μm) completely dissolved in lactic acid in 48 hours, and in synovial fluid with 500 mMol lactic acid in 5 days, generating birefringent rhomboid and rod-shaped crystals. SEM analysis with energy dispersive x-ray spectroscopy of these crystals showed average dimensions of around 2 μm x 40 μm, which contained oxygen, calcium and phosphorous at 8.64:1.85:1. Raman spectroscopy of the generated crystals further showed 910/cm and 1049/cm peaks, aligning with calcium oxalate monohydrate and calcium pyrophosphate, respectively. Conclusions: This work shows that lactic acid and micronized mineralized bone together directly generate calcium-containing crystals. These observations may provide insights into the elusive etiology of arthritis with crystal involvement, possibly indicating lactic acid as a clinical target for treatment. [ABSTRACT FROM AUTHOR]

Recent studies on murine models have demonstrated the potential of dark field (DF) x-ray imaging for lung diseases. The alveolar microstructure causes small angle scattering, which is visualised in DF images. Whether DF imaging works for human lungs is not a priori guaranteed as human alveoli are larger and system settings for murine imaging will probably have to be adapted. This work examines the potential of translating DF imaging to human lungs. The DF contrast due to murine and human lung models was studied using numerical wave propagation simulations, where the lungs were modelled as a volume filled with spheres. Three sphere diameters were used: 39, 60 and 80 μm for the murine model and 200, 300 and 400 μm spheres for the human model. System settings applied for murine lung response modelling were taken from a prototype grating interferometry scanner used in murine lung experiments. The settings simulated for human lung imaging simulations combine the requirements for grating interferometry and conventional chest RX in terms of x-ray energy and pixel size. The DF signal in the simulated murine model was consistent with results from experimental DF data. The simulated linear diffusion coefficient for medium alveoli diameters was found to be (1.31±0.01)⋅10−11 mm-1, 120 times larger than those of human lung tissue ((1.09±0.01)⋅10−13 mm-1). However, as the human thorax is typically a factor 15 times larger than that of murine animals, the overall DF effect in human lungs remains substantial. At the largest lung thickness and for the DF setup simulated, human lungs have an estimated DF response of around 0.31 and murine lungs of 0.23. Dark field imaging can therefore be considered a promising modality for use in human lung imaging. [ABSTRACT FROM AUTHOR]

In this paper the possibility of classification of X-ray images of the cervical vertebrae is studied. The images should be classified into one of the following classes—the images of healthy vertebrae and the images of vertebrae with syndesmophytes. The vertebra contours, described unambiguously by using the generalized shape language, are the basis of the analysis. As a result, the contour is represented as a chain of sinquads that determine switches. The found switches are the characteristic points of the analyzed contour. In these points additional features of the contour are determined. On the basis of these features two aforementioned classes of images are defined as fuzzy sets. Such an approach allows us to create a hierarchical algorithm of classification based on the syntactic and fuzzy description of the contour. [ABSTRACT FROM AUTHOR]

Background and objective: The current methods to image alveolar bone in humans include intraoral 2D radiography and cone-beam computed tomography (CBCT). However, these methods expose the subject to ionizing radiation. Therefore, ultrasound imaging has been investigated as an alternative technique, as it is both non-invasive and free from ionizing radiation. In order to assess the validity and reliability of ultrasonography in visualizing alveolar bone, a systematic review was conducted comparing ultrasound imaging to CBCT for examination of the alveolar bone level. Study design: Seven databases were searched. Studies addressing examination of alveolar bone level via CBCT and ultrasound were selected. Risk of bias under Cochrane guidelines was used as a methodological quality assessment tool. Results: All the four included studies were ex vivo studies that used porcine or human cadaver samples. The alveolar bone level was measured by the distance from the alveolar bone crest to certain landmarks such as cemento-enamel junction or gingival margin. The risk of bias was found as low. The mean difference between ultrasound and CBCT measurements ranged from 0.07 mm to 0.68 mm, equivalent to 1.6% - 8.8%. Conclusions: There is currently preliminary evidence to support the use of ultrasonography as compared to CBCT for the examination of alveolar bone level. Further studies comparing ultrasound to gold standard methods would be necessary to help validate the accuracy of ultrasonography as a diagnostic technique in periodontal imaging. [ABSTRACT FROM AUTHOR]

Objective: Area of muscle, fat, and bone is often measured in thigh CT scans when tissue composition is a key outcome. SliceOmatic software is commonly referenced for such analysis but published methods may be insufficient for new users. Thus, a quick start guide to calculating thigh composition using SliceOmatic has been developed. Methods: CT images of the thigh were collected from older (69 ± 4 yrs, N = 24) adults before and after 12-weeks of resistance training. SliceOmatic was used to segment images into seven density regions encompassing fat, muscle, and bone from -190 to +2000 Hounsfield Units [HU]. The relative contributions to thigh area and the effects of tissue density overlap for skin and marrow with muscle and fat were determined. Results: The largest contributors to the thigh were normal fat (-190 to -30 HU, 29.1 ± 7.4%) and muscle (35 to 100 HU, 48.9 ± 8.2%) while the smallest were high density (101 to 150 HU, 0.79 ± 0.50%) and very high density muscle (151 to 200 HU, 0.07 ± 0.02%). Training significantly (P<0.05) increased area for muscle in the very low (-29 to -1 HU, 5.5 ± 7.9%), low (0 to 34 HU, 9.6 ± 16.8%), normal (35 to 100 HU, 4.2 ± 7.9%), and high (100 to 150 HU, 70.9 ± 80.6%) density ranges for muscle. Normal fat, very high density muscle and bone did not change (P>0.05). Contributions to area were altered by ~1% or less and the results of training were not affected by accounting for skin and marrow. Conclusions: When using SliceOmatic to calculate thigh composition, accounting for skin and marrow may not be necessary. We recommend defining muscle as -29 to +200 HU but that smaller ranges (e.g. low density muscle, 0 to 34 HU) can easily be examined for relationships with the health condition and intervention of interest. Trial registration: Clinicaltrials.gov [ABSTRACT FROM AUTHOR]

Disorders of the lungs such as chronic obstructive pulmonary disease (COPD) are a major cause of chronic morbidity and mortality and the third leading cause of death in the world. The absence of sensitive diagnostic tests for early disease stages of COPD results in under-diagnosis of this treatable disease in an estimated 60–85% of the patients. In recent years a grating-based approach to X-ray dark-field contrast imaging has shown to be very sensitive for the detection and quantification of pulmonary emphysema in small animal models. However, translation of this technique to imaging systems suitable for humans remains challenging and has not yet been reported. In this manuscript, we present the first X-ray dark-field images of in-situ human lungs in a deceased body, demonstrating the feasibility of X-ray dark-field chest radiography on a human scale. Results were correlated with findings of computed tomography imaging and autopsy. The performance of the experimental radiography setup allows acquisition of multi-contrast chest X-ray images within clinical boundary conditions, including radiation dose. Upcoming clinical studies will have to demonstrate that this technology has the potential to improve early diagnosis of COPD and pulmonary diseases in general. [ABSTRACT FROM AUTHOR]

The multi-plated skeleton of echinoids is made of the stereom, a light-weight construction which resembles a micro-beam framework. Although the two-dimensional design of the stereom has been studied, its spatial architecture is only little known. It is, however, imperative to understand the spatial architecture of the trabecular system in order to interpret its structural principles of this load-bearing construction. The echinoid’s trabecular system is thus analyzed in-depth with respect to eight topological descriptors. The echinoid’s plates are divided into two regions, the center of which consists of an unordered stereom, and the margin which consists of an ordered stereom. The eight trabecular descriptors indicate that the basal topology of the two plate regions are similar. The trabecular system predominantly consists of short and stocky trabeculae that show little tortuosity. The majority of trabeculae intersect in a 3N configuration, where three trabeculae intersect in one common node. Trabeculae in the 3N configuration intersect in an angle of around 120° resulting in a planar and triangular motif. These planar elements, when arranged in an angular off-set, can resist multi-dimensional loads. Results also show that the trabecular orientation perpendicular to the plate’s surface is at an angle of 60°. The trabecular orientation in the plate’s horizontal plane is directional. Both trabecular orientations reflect a construction which is capable of resisting applied loads and can distribute these loads over the entire skeleton. The spatial architecture of the echinoid’s trabecular system is thus considered to be a performative light-weight and load-bearing system. [ABSTRACT FROM AUTHOR]

Although an extensive research is being undertaken, the ideal bone graft and evaluation method of the bone formation draw still a warranted attention. The purpose of this study was to develop a novel multimodal radiomics evaluation method, utilizing X-ray computed tomography (CT) and single photon emission computed tomography (SPECT) with Tc-99m-Methyl diphosphonate (Tc-99m-MDP) tracer. These modalities are intended to provide quantitative data concerning the mineral bone density (after evaluation it is referred to as opacity) and the osteoblast activity, at the same time. The properties of bone formation process within poly (methyl methacrylate)-based bone cement graft (PMMA) was compared to that of albumin coated, sterilized, antigen-extracted freeze-dried human bone grafts (HLBC), in caudal vertebrae (C5) of rats. The animals were scanned at 3 and 8 weeks after surgery. In both groups, the mean opacity increased, while the mean Tc-99m-MDP activity decreased. The later parameter was significant (n = 4, p = 0.002) only in HLBC group. The linear regression analysis of PMMA-treated group variables (mean opacity increase; mean Tc-99m-MDP activity decrease), revealed a negative correlation with the medium strength (r = 0.395, p = 0.605). Whereas, it showed strong positive correlation when HLBC group variables were analyzed (r = 0.772, p = 0.012). These results indicate that using HLBC grafts is advantageous in terms of the osteoblast activity and bone vascularization over PMMA cement. Using this regression analysis method, we were able to distinguish characteristics that otherwise could not be distinguished by a regular data analysis. Hence, we propose utilizing this novel method in preclinical tests, and in clinical monitoring of bone healing, in order to improve diagnosis of bone-related diseases. [ABSTRACT FROM AUTHOR]

In scenarios where the use of a Computed Tomography (CT) is difficult, such as during surgery or in the ICU, the use of a C-arm system to generate tomographic information could contribute with interesting additional clinical information. Recent days are seeing the development of the so-called cone-beam CT (CBCT) based on advanced motorized isocentric C-arm systems. To be able to make use of more basic C-arm systems, apart from the geometric non-idealities common to any CBCT, we need to address other difficulties. First, the trajectory of the source-detector pair may differ from a circular path and the system may suffer mechanical strains that modify the relative positions of the source and detector for different projection angles. Second, and more importantly, the exact position of the source and detector elements may not be repeatable for consecutive rotations due to low mechanical precision, thus preventing an accurate geometrical calibration of the system. Finally, the limitation of the angular span and the difficulty of obtaining a high number of projections pose a great challenge to the image reconstruction. In this work, we present a novel method to adapt a standard C-arm, originally designed for planar imaging, to be used as a tomograph. The key parts of the new acquisition protocol are (1) a geometrical calibration method to compensate mechanical inaccuracies that prevent an accurate repetition of source-detector position between acquisitions, and (2) an advanced image reconstruction method able to deal with limited angle data, sparse projections and non-circular trajectories. Both methods exploit surface information from the patient, which can be obtained using a 3D surface scanner. The proposed method was evaluated with two real C-arm systems, based on an image intensifier and a flat panel detector respectively, showing the feasibility of the proposal. [ABSTRACT FROM AUTHOR]

Introduction: Posterior tibial slope (PTS) and sagittal alignment are important factors in the etiology of knee osteoarthritis and knee surgery. Clinically, sagittal alignment, which indicates flexion contracture of the knee, contributes to knee function in weight-bearing (WB) conditions. PTS and sagittal alignment under WB conditions in varus osteoarthritic knees are presumed to affect each other, but their association remains unclear. In this study, we aimed to clarify the association. Material and methods: In total, 140 osteoarthritic varus knees were investigated. Under WB conditions, a three-dimensional (3D) alignment assessment system was applied via biplanar long-leg X-rays, using 3D-to-2D image registration technique. The evaluation parameters were as follows: 1) 3D mechanical flexion angle (3DMFA) in regards to sagittal alignment, 2) passing point in the WB line (PP), and 3) medial and lateral PTS. Results: The medial and lateral PTS showed a positive correlation with 3DMFA and PP, respectively (medial PTS–3DMFA, p = 0.001; medial PTS–PP, p < 0.0001; lateral PTS–3DMFA, p < 0.0001; lateral PTS–PP, p = 0.002). The flexion contracture group with 3DMFA >5° demonstrated greater PTS than non-flexion contracture group (medial PTS, p = 0.006; lateral PTS, p = 0.006). Conclusions: Both medial and lateral PTS were correlated with sagittal alignment under WB conditions and were larger in the flexion contracture group. This finding can explain the function to take the load articular surface parallel to the ground for holding the balance in WB conditions in the sagittal plane for osteoarthritic knees. Moreover, surgeons may be required to decrease the PTS during knee arthroplasty to restore full extension in knees of patients with fixed flexion contracture. [ABSTRACT FROM AUTHOR]

This paper describes and presents a stable and reliable set of stereo-photogrammetric normative data for global and spino-pelvic sagittal alignment, as a proven reference system for evaluating/measuring a fully unconstrained natural upright neutral standing attitude in a young healthy adult population. The methodological features described in this article will enable future studies to replicate and/or directly compare a wide range of different postural tests and/or sagittal alignment assessment procedures including the study of sagittal spine shape variations occurring during gait performance. To date, the quantitative evaluation of adult spinal deformity (ASD) has been mainly confined to the X-ray imaging approach and, more recently, to 3D X-ray reconstruction. Within the existing evaluation framework an opportunity exists for an additional approach: a quantitative evaluation procedure which is easy, accurate, relatively speedy and non-ionising, in order to monitor and track the progress of patients in the areas of both surgical and non-surgical treatment. The resources and methodology described in this paper have been proven to meet all these criteria. They have enabled full 3D posture (including 3D spine shape and sagittal alignment of the skeleton) to be consistently and successfully measured in adult volunteers. All the measurement/evaluation procedures and outcomes carried out were based entirely on the new non-ionising 3D opto-electronic stereo-photogrammetric approach described in this article. The protocol for this methodology was based on a standard set of 27 pre-selected anatomical “landmarks” on the human body, providing standard reference points for observation and measurement. A total of 124 healthy subjects were successfully assessed and, for each subject, 27 individual markers were applied to the corresponding locations on his/her body. Statistical tests to investigate gender differences were also carried out. Descriptive statistics are provided for all 15 of the spino-pelvic parameters under consideration. Results indicated significant differences between genders in five sets of parameters: Kyphosis tilt, Head tilt, Pelvic tilt, Spino-pelvic angle and T1-pelvic angle. The data also demonstrate a high degree of congruity with results obtained using the X-ray method, as evidenced by the existing literature in the field. In summary, the current study presents a new stereo-photogrammetric opto-electronic technology which can be used successfully for ASD evaluation and introduces a comprehensive set of normative data analogous to those proposed in X-ray analysis for sagittal spino-pelvic and total body alignment. [ABSTRACT FROM AUTHOR]

Bone remodeling occurs via coupling between bone resorption by osteoclasts and bone formation by osteoblasts. The mechanisms that regulate osteoclast signals to osteoblasts are not well understood. Published studies have reported that BMP signaling in osteoclasts regulate osteoclast coupling targets. To investigate the necessity of canonical BMP signaling on osteoclast differentiation and coupling, we mated Smad1fl/fl; Smad5fl/fl mice to c-Fms-Cre mice. We analyzed male mice at 3 months of age to determine the skeletal phenotype of the Smad1fl/fl; Smad5fl/fl;c-Fms-Cre (SMAD1/5 cKO) mice. There was a 1.2-fold decrease in trabecular BV/TV in SMAD1/5 cKO. Analyses of osteoclast serum markers in SMAD1/5 cKO mice, showed a significant increase in CTX-1 (1.5 fold) and TRAP ELISA (3 fold) compared to control mice. In these same mice, there was a 1.3-fold increase in cortical thickness. Consistent with the increase in cortical thickness, we found a 3-fold increase in osteoblast activity as measured by P1NIP ELISA assay from SMAD1/5 cKO mice. To explain the changes in cortical thickness and P1NP activity, we determined conditioned media from SMAD1/5 cKO osteoclast cultures enhanced mineralization of an osteoblast cell line and coupling factors expressed by osteoclasts that regulate osteoblast activity Wnt1 (4.5-fold increase), Gja1 (3-fold increase) and Sphk1 (1.5-fold increase) were all upregulated in osteoclasts from SMAD1/5 cKO compared to control osteoclasts. Lastly osteoclasts treated with dorsomorphin, a chemical inhibitor of SMAD1/5 signaling, demonstrates an increase in Wnt1 and Gja1 expression similar to the SMAD1/5 cKO mice. Previous studies demonstrated that TGF-β signaling in osteoclasts leads to increases in WNT1 expression by osteoclasts. Therefore, our data suggest that TGF-β and BMP signaling pathways in osteoclasts could act in an antagonistic fashion to regulate osteoblast activity through WNT1 and other coupling factors. [ABSTRACT FROM AUTHOR]

Bone is a highly organized tissue in which each structural level influences the macroscopic and microscopic mechanical behavior. In particular, the quantity, quality, and distribution of the different bone components, i.e. collagen matrix and hydroxyapatite crystals, are associated with bone strength or fragility. Common spectroscopic techniques used to assess bone composition have resolutions limited to the micrometer range. In this study, our aims were two-fold: i) to develop and validate the AFM-IR methodology for skeletal tissues and ii) to apply the methodology to sheep cancellous bone with the objective to obtain novel findings on the composition and structure of trabecular packets.To develop the methodology, we assessed spatial and temporal reproducibility using a known homogeneous material (polymethylmethacrylate, PMMA). We verified that the major peak positions were similar and not shifted when compared to traditional Fourier Transform Infrared imaging (FTIRI). When AFM-IR was applied to sheep cancellous bone, the mineral-to-matrix ratio increased and the acid phosphate substitution ratio decreased as a function of tissue maturity. The resolution of the technique enabled visualization of different stages of the bone maturation process, particularly newly-formed osteoid prior to mineralization. We also observed alternating patterns of IR parameters in line and imaging measurements, suggesting the apposition of layers of alternating structure and / or composition that were not visible with traditional spectroscopic methods. In conclusion, nanoscale IR spectroscopy demonstrates novel compositional and structural changes within trabecular packets in cancellous bone. Based on these results, AFM-IR is a valuable tool to investigate cancellous bone at the nanoscale and, more generally, to analyze small dynamic areas that are invisible to traditional spectroscopic methods. [ABSTRACT FROM AUTHOR]

Hard x-ray lenses are useful elements in x-ray microscopy and in creating focused illumination for analytical applications such as x-ray fluorescence imaging. Recently, polymer compound refractive lenses for focused illumination in the soft x-ray regime (< 10 keV) have been created with nano-printing. However, there are no such lenses yet for hard x-rays, particularly of short focal lengths for benchtop microscopy. We report the first instance of a nano-printed lens for hard x-ray microscopy, and evaluate its imaging performance. The lens consists of a spherically focusing compound refractive lens designed for 22 keV photon energy, with a tightly packed structure to provide a short total length of 1.8 mm and a focal length of 21.5 mm. The resulting lens technology was found to enable benchtop microscopy at 74x magnification and 1.1 μm de-magnified image pixel size at the object plane. It was used to image and evaluate the focal spots of tungsten-anode micro-focus x-ray sources. The overall system resolution with broadband illumination from a tungsten-anode x-ray tube at 30 kV and 10 mm focal distance was measured to be 2.30±0.22 μm. [ABSTRACT FROM AUTHOR]

Because of the importance of bone in the biomedical, forensic and archaeological contexts, new investigation techniques are constantly required to better characterize bone ultrastructure. In the present paper, we provide an extended investigation of the vibrational features of bone tissue in the 0.1-3 THz frequency range by time-domain THz spectroscopy. Their assignment is supported by a combination of X-ray diffraction and DFT-normal modes calculations. We investigate the effect of heating on bone tissue and synthetic calcium-phosphates compounds with close structure and composition to bone mineral, including stoichiometric and non-stoichiometric hydroxyapatite (HA), tricalcium phosphate, calcium pyrophosphate and tetracalcium phosphate. We thus demonstrate that the narrow vibrational mode at 2.1 THz in bone samples exposed to thermal treatment above 750 °C arises from a lattice mode of stoichiometric HA. This feature is also observed in the other synthetic compounds, although weaker or broader, but is completely smeared out in the non-stoichiometric HA, close to natural bone mineral composition, or in synthetic poorly crystalline HA powder. The THz spectral range therefore provides a clear signature of the crystalline state of the investigated bone tissue and could, therefore be used to monitor or identify structural transitions occurring in bone upon heating. [ABSTRACT FROM AUTHOR]

A competitive scheme for economic storage of the informational content of an X-Ray image, as it can be used for further processing, is presented. It is demonstrated that sparse representation of that type of data can be encapsulated in a small file without affecting the quality of the recovered image. The proposed representation, which is inscribed within the context of data reduction, provides a format for saving the image information in a way that could assist methodologies for analysis and classification. The competitiveness of the resulting file is compared against the compression standards JPEG and JPEG2000. [ABSTRACT FROM AUTHOR]

Dental implants are important tools for restoring the loss of teeth. The rapid growth and periodic regeneration of antlers make Sika deer a good and less invasive alternative model for studying bone remodelling in mammals. We developed a special loading device for antlers and analysed the bone reaction around unloaded implants and under immediate loading conditions until osseointegration occurred. In micro-computed tomography images, the density of antler tissue around the implants increased as the loading time increased. This finding was histologically confirmed by the good osseointegration observed in unloaded and loaded specimens. Antler tissue displays a similar healing process to human bone. The use of an antler model is a promising alternative for implant studies that does not require animal sacrifice. [ABSTRACT FROM AUTHOR]

Methods for preventing medication-related osteonecrosis of the jaw (MRONJ) in cancer patients who have received high-dose bisphosphonate (BP) or denosumab (Dmab) have not yet been established. Tooth extraction after starting medication has been believed to be a major risk factor for MRONJ, and therefore this procedure tends to be avoided. This study investigated the risk factors for MRONJ, with a special reference to the correlation between tooth extraction and development of MRONJ. One hundred and thirty-five cancer patients who were administrated high-dose BP or Dmab were enrolled in the study. Demographic factors, general condition, treatment factors, and dental findings were examined retrospectively using medical records and panoramic X-ray findings. The cumulative occurrence rate of MRONJ was calculated using the Kaplan–Meier method, and the correlation between these variables and development of MRONJ was analyzed by univariate and multivariate Cox regression analysis. MRONJ developed in 18 of 135 patients. The 1-, 2-, and 3-year cumulative occurrence rates were 8.6%, 21.5%, and 29.2%, respectively. The duration of medication before first visit to the dental unit and the presence of a tooth with clinical symptoms were significantly correlated with the development of MRONJ. The rate of MRONJ occurrence in patients who had teeth with clinical symptoms, but who did not undergo tooth extraction, became higher 2 years later than that in patients who underwent extraction of teeth with symptoms, although not significant. Early dental examination and effective preventative care to avoid infection/inflammation are important for preventing MRONJ. [ABSTRACT FROM AUTHOR]

Background and aims: Body composition assessment is often used in clinical practice for nutritional evaluation and monitoring. The standard method, dual-energy X-ray absorptiometry (DXA), is hardly feasible in routine clinical practice contrary to Bioelectrical Impedance Analysis (BIA) method. We thus aimed to compare body composition assessment by DXA and BIA according to the body mass index (BMI) in a large cohort. Methods: Retrospectively, we analysed DXA and BIA measures in patients followed in a Nutrition Unit from 2010 to 2016. Body composition was assessed under standardized conditions in the morning, after a fasting period of 12 h, by DXA (Lunar Prodigy Advance) and BIA (Bodystat QuadScan 4000, Manufacturer’s equation). Bland-Altman test was performed for each class of BMI (kg/m2) and fat mass and fat free mass values were compared using Kruskal-Wallis test. Pearson correlations were also performed and the concordance coefficient of Lin was calculated. Results: Whatever the BMI, BIA and DXA methods reported higher concordance for values of FM than FFM. Body composition values were very closed for patients with BMI between 16 and 18,5 (difference < 1kg). For BMI > 18,5 and BMI < 40, BIA overestimated fat free mass from 3,38 to 8,28 kg, and underestimated fat mass from 2,51 to 5,67 kg compared with DXA method. For BMI ≥ 40, differences vary with BMI. For BMI < 16, BIA underestimated fat free mass by 2,25 kg, and overestimated fat mass by 2,57 kg. However, limits of agreement were very large either for FM and FFM values, irrespective of BMI. Conclusion: The small bias, particularly in patients with BMI between 16 and 18, suggests that BIA and DXA methods are interchangeable at a population level. However, concordance between BIA and DXA methods at the individual level is lacking, irrespective of BMI. [ABSTRACT FROM AUTHOR]

Bronchopulmonary dysplasia (BPD) remains the most common and serious chronic lung disease of premature infants. Severe BPD complicated with pulmonary hypertension (PH) increases the mortality of these infants. Riociguat is an allosteric soluble guanylate cyclase stimulator and is approved by the FDA for treating PH in adults. However, it has not been approved for use in neonates due to concern for adverse effects on long bone growth. To address this concern we investigated if administration of riociguat is beneficial in preventing hyperoxia-induced lung injury and PH without side effects on long bone growth in newborn rats. Newborn rats were randomized to normoxia (21% O2) or hyperoxia (85% O2) exposure groups within 24 hours of birth, and received riociguat or placebo by once daily intraperitoneal injections during continuous normoxia or hyperoxia exposure for 9 days. In the hyperoxia control group, radial alveolar count, mean linear intercept and vascular density were significantly decreased, the pathological hallmarks of BPD, and these were accompanied by an increased inflammatory response. There was also significantly elevated vascular muscularization of peripheral pulmonary vessels, right ventricular systolic pressure and right ventricular hypertrophy indicating PH. However, administration of riociguat significantly decreased lung inflammation, improved alveolar and vascular development, and decreased PH during hyperoxia by inducing cGMP production. Additionally, riociguat did not affect long bone growth or structure. These data indicate that riociguat is beneficial in preventing hyperoxia-induced lung injury and PH without affecting long bone growth and structure and hence, suggests riociguat may be a potential novel agent for preventing BPD and PH in neonates. [ABSTRACT FROM AUTHOR]

Background and purpose: The most common and gold standard method to diagnose and follow-up on scoliosis treatment is to capture biplanar X-ray images and then use these to determine the sagittal frontal spinal curvature angles by the Cobb method. Reducing exposure to radiation is an important aspect for consideration, especially regarding children. The ZEBRIS spinal examination method is an external, non-invasive measurement method that uses an ultrasound-based motion analysis system. The aim of this study is to compare angle values of patients with adolescent idiopathic scoliosis (AIS) determined by the ZEBRIS spine examination method with the angle values defined by the gold standard Cobb method on biplanar X-ray images. Methods: Subjects included 19 children with AIS (mean age 14.5±2.1 years, range 8–16 years, frontal plane thoracic Cobb angle 19.95±10.23°, thoracolumbar/lumbar angle 16.57±10.23°). The thoracic kyphosis and lumbar lordosis in the sagittal plane and the thoracic and lumbar scoliosis values were calculated by the Cobb method on biplanar X-ray images. The sagittal frontal spinal curvature angles were calculated from the position of the processus spinosus of 19 vertebrae, as determined by the ZEBRIS spine examination method. The validity of the ZEBRIS spine examination method was evaluated with Bland-Altman analyses between the sagittal and frontal spinal curvature parameters calculated from data determined by the ZEBRIS spine examination method and data obtained by the Cobb method on the X-ray images. Results and discussion: Thoracic spinal curvature angles in sagittal and in frontal planes can be measured with sufficient accuracy. The slopes of the linear regression lines for thoracic kyphosis (TK) and thoracic scoliosis (TSC) are close to one (1.00 and 0.79 respectively), and the intercept values are below 5 degrees. The correlation between the TK and TSC values determined by the two methods is significant (p = 0.000) and excellent (rTK = 0.95, rTSC = 0.85). The differences are in the limit of agreement. The lumbar lordosis (LL) in the sagittal plane shows a very good correlation (rLL = 0.76); however the differences between the angles determined by the two methods are out of the limit of agreement in patients with major lumbar lordosis (LL≥50°). The thoracolumbar/lumbar spinal curvature angles in the frontal plane determined by ZEBRIS spine examination were underestimated at curvatures larger than 15°, mainly due to the rotational and pathological deformities of the scoliotic vertebrae. However, the correlation between lumbar scoliosis (LSC) values determined by the two methods is significant (p = 0.000) and excellent (rLSC = 0.84), the slopes are below one (0.71), the intercept values are below 5 degrees, and the differences between the angles determined by the two methods are within the limits of agreement. We could conclude that ZEBRIS spinal examination is a valid and reliable method for determination of sagittal and frontal curvatures during the treatment of patients with scoliosis. However, it cannot replace the biplanar X-ray examination for the visualization of spinal curvatures in the sagittal and frontal planes and the rotation of vertebral bodies during the diagnosis and annual evaluation of the progression. [ABSTRACT FROM AUTHOR]

We aimed to determine the significance and usefulness of imaging characteristics of gubernaculum tracts (GT) for the diagnosis of odontogenic tumors or cysts. This was a retrospective analysis of relationships between odontogenic or non-odontogenic tumors or cysts and the GT that were visualized using multi-detector computed tomography (MDCT). The relationship between the size of a mass and expansion of the GT in all odontogenic tumors or cysts to which GTs were contiguous on MDCT, was statistically analyzed. Intact or expanded GTs were detected in MDCT images on the top of almost all odontogenic tumors or cysts, but not on non-odontogenic tumors or cysts. Characteristic image findings regarding the relationship between the GT and the odontogenic mass were detected for the respective odontogenic tumors or cysts in which the GTs were contiguous to the mass on MDCT. In ameloblastomas, expansion of the GTs significantly and very strongly correlated with tumor size (r = 0.741, p = 0.0001), but this correlation was very weak in dentigerous cysts (r = 0.167, p = 0.028) and there was no correlation between these parameters in odontogenic keratocysts (r = -0.089, p = 0.557). The imaging characteristics of GTs at the top of masses should be very useful for both the differential diagnosis of the pathological diagnosis of odontogenic masses and for differentiation between odontogenic and non-odontogenic masses. [ABSTRACT FROM AUTHOR]

Bone substitutes are frequently used in clinical practice but often exhibit limited osteoinductivity. We hypothesized that unfocused shockwaves enhance the osteoinductivity of bone substitutes and improve osteointegration and angiogenesis. Three different bone substitutes, namely porous tricalcium phosphate, porous hydroxyapatite and porous titanium alloy, were implanted in a critical size (i.e. 6-mm) femoral defect in rats. The femora were treated twice with 1500 shockwaves at 2 and 4 weeks after surgery and compared with non-treated controls. The net volume of de novo bone in the defect was measured by microCT-scanning during 11-weeks follow-up. Bone ingrowth and angiogenesis in the bone substitutes was examined at 5 and 11 weeks using histology. It was shown that hydroxyapatite and titanium both had an increase of bone ingrowth with more bone in the shockwave group compared to the control group, whereas resorption was seen in tricalcium phosphate bone substitutes over time and this was insensitive to shockwave treatment. In conclusion, hydroxyapatite and titanium bone substitutes favour from shockwave treatment, whereas tricalcium phosphate does not. This study shows that osteoinduction and osteointegration of bone substitutes can be influenced with unfocused shockwave therapy, but among other factors depend on the type of bone substitute, likely reflecting its mechanical and biological properties. [ABSTRACT FROM AUTHOR]