Search

Hydro-viscous clutch has become an inevitable choice for special vehicle transmissions. As a nonlinear dynamic system with large lagging link, its timing performance is affected by input rotational speed, lubricating oil temperature and pressure and other factors. However, from the control perspective, the speed regulation law, formation mechanism control characteristics, global model of hydro-viscous speed control system (HSCS) are unclear. To solve these problems, this paper presents a comprehensive analysis of the Hydro-viscous Speed Control System (HSCS), focusing on its steady-state and dynamic speed control characteristics. A data-driven model is established to describe the relationship between input rotational speed, output speed, control oil pressure, and lubricating oil temperature. The findings provide a foundation for optimizing HSCS structure and parameters, enhancing the performance and reliability of such systems in special vehicle transmissions and establishing a temperature-speed control system for special vehicle transmissions., (© 2024. The Author(s).)

Aim: In patients with type-2 diabetes mellitus (T2DM), sodium-glucose co-transporter 2 inhibitors are suspected to increase the risk of amputation. "Traditional" diuretics may increase major adverse limb events (MALEs), but the evidence is weak. We studied the association between common diuretics (i.e. thiazides, loop- and potassium-sparing diuretics) and MALEs/amputations in patients with T2DM., Methods: Consecutive T2DM patients without cardiovascular history referred to our center for cardiovascular check-ups were retrospectively studied. Follow-up data on MALEs were collected. We used Cox models to assess the association between diuretics and MALEs, or amputation alone. A propensity score with inverse probability of diuretic treatment weighting (IPTW) analysis was performed., Results: We studied 1309 patients, (59.5 ± 10.7 years, 51 % females) with diabetes duration of 9.1 ± 8.5 years, among whom 402 (30 %) were taking diuretics. During a follow-up of 3.8 ± 1.64 years, 121 (9.1 %) had MALEs, including 19 (1.4 %) amputations. Death occurred in 111 patients and the proportion of death was significantly different between groups: patients with diuretics n = 49, 44.1% vs patients without diuretics n = 62, 55.9 %, P = 0.001. Diuretics, in multivariable analysis, were associated with MALEs (aHR[95 %CI] 1.96[1.32;2.91] P = 0.001), even after adjustment on propensity score (aHR 1.66[1.08;2.56] P = 0.02) and IPTW analysis (aHR 1.76[1.67;1.84] P < 0.0001). This risk was particularly increased in case of an abnormal ankle-brachial index (aHR 2.29[1.32;3.96], P = 0.003) at baseline. Looking at diuretic classes separately, the adjusted risk was increased with loop diuretics (aHR 2.56[1.16;5.64] P = 0.020), thiazides (aHR 2.21[1.37;3.57] P = 0.001) or potassium sparing diuretics (aHR 2.56[1.16;5.64] P = 0.020)., Conclusion: Diuretic treatment weighting may be associated with increased risk of MALEs. We identified several markers of increased risk of limb events where the use of diuretics should be considered with caution., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: J Magne - Servier, AstraZeneca V Aboyans - Amarin, AstraZeneca, Bayer, BMS/Pfizer alliance, Boehringer-Ingelheim, NovoNordisk, Vifor., (Copyright © 2024 Elsevier Masson SAS. All rights reserved.)

2D carbon nitride nanosheets, exemplified by g-C 3 N 4 , offers significant structural benefits and enhanced photocatalytic activity. Nonetheless, the quantum confinement effect prevalent in nanoscale photocatalysts would result in an enlarged bandgap, potentially restricting the spectral absorption range and impeding improvements in photocatalytic efficiency. Here, a high-performance 2D photocatalyst with an extended spectral response is achieved by incorporating a novel phenol-like structure into the conjugated framework of ultrathin g-C 3 N 4 nanosheet. This novel strategy features targeted pyrimidine doping to create a conjugated carbon zone in heptazine structure, offering a thermodynamically favorable pathway for hydroxyl functionalization during the annealing exfoliation process. Consequently, the π-π* transition energy in the material is significantly decreased, and the active lone pair electrons in phenol-like structure induces a new n-π* transition with notably enhanced absorption from 500 to 650 nm. The optimized material shows a dramatic enhancement in photocatalytic activity, achieving ≈72 times than the activity of bulk g-C 3 N 4 , and demonstrating a measurable H 2 production rate of 6.57 µmol g -1 h -1 under 650 nm light. This study represents a significant step forward in the strategic design of 2D photocatalysts, with tailored electronic structures that significantly boost light absorption and photocatalytic efficiency., (© 2024 Wiley‐VCH GmbH.)

A recent study reported exaggerated false positives by popular differential expression methods when analyzing large population samples. We reproduce the differential expression analysis simulation results and identify a caveat in the data generation process. Data not truly generated under the null hypothesis led to incorrect comparisons of benchmark methods. We provide corrected simulation results that demonstrate the good performance of dearseq and argue against the superiority of the Wilcoxon rank-sum test as suggested in the previous study., (© 2024. The Author(s).)

Background: The right to participate in political processes is fundamental to democratic governance, economic development and human rights., Objectives: We assessed participation in political processes and also explored factors associated with voting at the most recent election for people with and without disabilities., Method: We conducted cross-sectional survey in four cities in Senegal and three in Cameroon in 2021. Disability was assessed using the Washington Group Short Set of questions. Univariate and multiple regression analyses were conducted to identify the factors associated with voting at the most recent elections., Results: Among 4180 participants in Cameroon and 4171 in Senegal, disability prevalence was 9.77% and 10.89%, respectively. More than half of the participants had voted at the most recent elections in both Cameroon (52.31%) and Senegal (58.27%). Participants with an interest in politics, having all the key documents or registered with a political party were more likely to have voted in both countries. Adjusting for socio-demographic characteristics, people with disabilities were less likely to have voted compared to those without disabilities in Cameroon (odds ratio [OR] = 0.58 [0.40, 0.84]) and in Senegal (OR = 0.36 [0.26, 0.44])., Conclusion: There is an urgent need to address the socio-political and environmental factors that have been identified so as to close the disability gaps in voting and ensure equitable opportunities and levels of political participation between people with and without disabilities., Contribution: This article contributes to the existing knowledge base on the political participation of people with and without disabilities in Cameroon and Senegal., Competing Interests: This study was funded by Irish Aid. The funder had no role in study design, data collection and analysis, decision to publish or preparation of the manuscript., (© 2024. The Authors.)

Photocatalytic generation of H₂O₂, involving both oxygen reduction and water oxidation without sacrificial agents, necessitates maximized light absorption, suitable band structure, and efficient carrier transport. Leveraging the redox capacity this study designs and constructs a step-scheme heterostructured SnO₂/Zn₃In₂S₆ catalyst for H₂O₂ production from seawater under ambient conditions for the first time. This photocatalyst demonstrates a remarkable H₂O₂ production rate of 43.5 µmol g⁻¹ min⁻¹ without sacrificial agents, which can be increased to 80.7 µmol g⁻¹ min⁻¹ with additional O₂ injection. Extensive in situ and ex situ characterizations, supported by theoretical calculations, reveal efficient carrier transport and robust redox ability, enabling complete photosynthesis of H₂O₂ at the oxidation and reduction sites in the S-scheme SnO₂/Zn₃In₂S₆ heterojunction. Furthermore, it is hypothesized that substituting SnO₂ with other semiconductors such as TiO₂, WO₃, and BiVO₄ can all form S-scheme and the results confirm the feasibility of such catalyst design. Additionally, it demonstrates the recycling and further utilization of the H₂O₂ produced. These findings offer new insights into the design of heterostructure catalyst architectures and present new opportunities for H₂O₂ production from seawater at ambient conditions without sacrificial agents., (© 2024 Wiley‐VCH GmbH.)

The efficiency of photoelectrochemical (PEC) water splitting is hindered by the slow kinetics of the oxygen evolution reaction (OER). This study developed a composite photoanode for water oxidation by incorporating ternary LDHs (ZnCoAl-LDH) onto Ti-Fe 2 O 3 as a cocatalyst. The ZnCoAl-LDH/Ti-Fe 2 O 3 photoanode achieved a photocurrent density of 3.51 mA/cm 2 at 1.23 V vs. RHE, which is 9.8 times higher than that of bare Ti-Fe 2 O 3 . Through a series of characterizations, the synergistic effects among the three metals were revealed. Furthermore, the addition of Zn can induce the formation of more high-valent Co, increasing the conductivity of CoAl-LDH and significantly reducing the surface charge transfer resistance. These advantages significantly enhance the injection efficiency of ZnCoAl-LDH/Ti-Fe 2 O 3 (82 %), thereby accelerating the OER kinetics of Ti-Fe 2 O 3 . Our work introduces new approaches for selecting photoelectrochemical cocatalysts and designing high-performance photoanodes for water splitting., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Objectives: This study aims to compare the sedative effects of remimazolam and midazolam during impacted tooth extraction to provide a comfortable sedation treatment for patients with dental anxiety., Methods: A prospective randomized controlled trial was conducted, in which 60 patients undergoing intravenous sedation for mandibular impacted third molar extraction were evenly divided into either the remimazolam or midazolam group. Prior to receiving a nerve blocker, the patients were sedated with remimazolam or midazolam. Various parameters were recorded and analyzed, including onset time, awakening time, recovery time, modified dental anxiety scale (MDAS) scores before and after surgery, patient-doctor satisfaction levels, postoperative side effects within 24 hours, heart rate (HR), and mean arterial pressure (MAP) at different time points., Results: Compared with the midazolam group, patients in the remimazolam group demonstrated significantly shorter onset, awakening, and recovery times as well as lower postoperative MDAS scores and higher levels of patient-doctor satisfaction. Fewer postoperative side effects were reported in the remimazolam group, although the differences were not statistically significant., Conclusions: The use of remimazolam demonstrates faster onset and recovery, superior efficacy in reducing dental anxiety, and enhanced satisfaction among patients and doctors, thereby presenting distinct advantages for sedation treatment for patients with dental anxiety.

Constructing π-conjugated polymer structures through covalent bonds dominates the design of organic framework photocatalysts, which significantly depends on the selection of multiple donor-acceptor building blocks to narrow the optical gap and increase the lifetimes of charge carriers. In this work, self-bipolarized organic frameworks of single aromatic units are demonstrated as novel broad-spectrum-responsive photocatalysts for H 2 O 2 production. The preparation of such photocatalysts is only to fix the aromatic units (such as 1,3,5-triphenylbenzene) with alkane linkers in 3D space. Self-bipolarized aromatic units can drive the H 2 O 2 production from H 2 O and O 2 under natural sunlight, wide pH ranges (3.0-10.0) and natural water sources. Moreover, it can be extended to catalyze the oxidative coupling of amines. Experimental and theoretical investigation demonstrate that such a strategy obeys the mechanism of through-space π-conjugation, where the closely face-to-face overlapped aromatic rings permit the electron and energy transfer through the large-area delocalization of the electron cloud under visible light irradiation. This work introduces a novel design concept for the development of organic photocatalysts, which will break the restriction of conventional through-band π-conjugation structure and will open a new way in the synthesis of organic photocatalysts., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

Two-dimensional (2D) van der Waals (vdW) heterostructures are considered as promising candidates for realizing multifunctional applications, including photodetectors, field effect transistors and solar cells. In this work, we performed first-principles calculations to design a 2D vdW MoTe 2 /MoS 2 heterostructure and investigate its electronic properties, contact types and the impact of an electric field and in-plane biaxial strain. We find that the MoTe 2 /MoS 2 heterostructure is predicted to be structurally, thermally and mechanically stable. It is obvious that the weak vdW interactions are mainly dominated at the interface of the MoTe 2 /MoS 2 heterostructure and thus it can be synthesized in recent experiments by the transfer method or chemical vapor deposition. The construction of the vdW MoTe 2 /MoS 2 heterostructure forms a staggered type II band alignment, effectively separating the electrons and holes at the interface and thereby extending the carrier lifetime. Interestingly, the electronic properties and contact types of the type II vdW MoTe 2 /MoS 2 heterostructure can be tailored under the application of external conditions, including an electric field and in-plane biaxial strain. The semiconductor-semimetal-metal transition and type II-type I conversion can be achieved in the vdW MoTe 2 /MoS 2 heterostructure. Our findings underscore the potential of the vdW MoTe 2 /MoS 2 heterostructure for the design and fabrication of multifunctional applications, including electronics and optoelectronics., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The precise design and synthesis of active sites to improve catalyst's performance has emerged as a promising tactic for electrochemistry. However, it is challenging to combine different types of active sites and manipulate them simultaneously at atomic resolution. Here, we present a strategy to synthesize Re atom-doped Cu twin boundaries (TBs), through pulsed electrodeposition and boundary segregation. The Re-doped Cu TBs demonstrate a highly efficient nitrogen reduction reaction (NRR) performance. Re-doped Cu TBs showed a turnover frequency of ∼5889 s -1 , ∼800 times higher than the pure Cu TB active centers (∼7 s -1 ). In addition to the "acceptance-donation" activation of N 2 molecules, theoretical calculations also reveal that the Re-Re dimer on TB can boost the NRR and impede the hydrogen evolution reaction synchronously, rendering Re-doped Cu TB catalysts with high NRR activity and selectivity.

In this work, cyano contained g-C 3 N 4 comodified by In 2 S 3 and polypyrrole (C≡N─CN/IS/Ppy) materials are synthesized for the photocatalytic production of H 2 O 2 and photocatalysis-self-Fenton reaction for highly efficient degradation of metronidazole. The results from UV-vis spectrophotometry, surface photovoltage, and Kelvin probe measurements reveal the promoted transport and separation efficiency of photoinduced charges after the introduction of In 2 S 3 and Ppy in the heterojunction. The existence of a built-in electric field accelerates the photoinduced charge separation and preserves the stronger oxidation ability of holes at the valence band of C≡N─CN. Linear sweep voltammetry measurements, zeta potential analyzations, nitroblue tetrazolium determination, and other measurements show that Ppy improves the conversion ratio of • O 2 - to H 2 O 2 and the utilization ratio of • O 2 - , as well as suppresses decomposition of H 2 O 2 . Accordingly, the H 2 O 2 evolution rate produced via a two-step single-electron reduction reaction reaches almost 895 µmol L -1 h -1 , a value 80% and 7.2-fold higher than those obtained with C≡N─CN/IS and C≡N─CN, respectively. The metronidazole removal rate obtained via photocatalysis-self-Fenton reaction attains 83.7% within 120 minutes, a value much higher than that recorded by the traditional Fenton method. Overall, the proposed synthesis materials and route look promising for the H 2 O 2 production and organic pollutants degradation., (© 2023 Wiley‐VCH GmbH.)

Although S-scheme artificial photosynthesis shows promise for photocatalytic hydrogen production, traditional methods often overly concentrate on a single reduction site. This limitation results in inadequate redox capability and inefficient charge separation, which hampers the efficiency of the photocatalytic hydrogen evolution reaction. To overcome this limitation, a double S-scheme system is proposed that leverages dual reduction sites, thereby preserving energetic photo-electrons and holes to enhance apparent quantum efficiency. The design features a double S-scheme junction consisting of CdS nanospheres decorated with anatase TiO 2 nanoparticles coupled with graphitic C 3 N 4 . The as-prepared catalyst exhibits a hydrogen evolution rate of 26.84 mmol g -1  h -1 and an apparent quantum efficiency of 40.2% at 365 nm. This enhanced photocatalytic hydrogen evolution is ascribed to the efficient charge separation and transport induced by the double S-scheme. Both theoretical calculations and comprehensive spectroscopy tests (both in situ and ex situ) affirm the efficient charge transport across the catalyst interface. Moreover, substituting the reduction-type catalyst CdS with other similar sulfides like ZnIn 2 S 4 , ZnS, MoS 2 and In 2 S 3 further confirms the feasibility of the proposed double S-scheme configuration. The findings provide a pathway to designing more effective double S-scheme artificial photosynthetic systems, opening up fresh perspectives in enhancing photocatalytic hydrogen evolution performance., (© 2023 Wiley-VCH GmbH.)

The realization of a controllable transparent conducting system with selective light transparency is crucial for exploring many of the most intriguing effects in top-illuminated optoelectronic devices. However, the performance is limited by insufficient electrical conductivity, low work function, and vulnerable interface of traditional transparent conducting materials, such as tin-doped indium oxide. Here, it is reported that two-dimensional (2D) titanium carbide (Ti 3 C 2 T x ) MXene film acts as an efficient transparent conducting electrode for the lead sulfide (PbS) colloidal quantum dots (CQDs) photodiode with controllable near infrared transmittance. The solution-processed interface engineering of MXene and PbS layers remarkably reduces the interface defects of MXene/PbS CQDs and the carrier concentration in the PbS layer. The stable Ti 3 C 2 T x /PbS CQDs photodiodes give rise to a high specific detectivity of 5.51 × 10 12  cm W -1  Hz 1/2 , a large dynamic response range of 140 dB, and a large bandwidth of 0.76 MHz at 940 nm in the self-powered state, ranking among the most exceptional in terms of comprehensive performance among reported PbS CQDs photodiodes. In contrast with the traditional photodiode technologies, this efficient and stable approach opens a new horizon to construct widely used infrared photodiodes with CQDs and MXenes., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Introduction: Timely and effective treatments of pericoronitis are very important. We aimed to evaluate the role of ornidazole in the treatment of pericoronitis, to provide insights for clinical pericoronitis treatment., Material and Methods: The PubMed, Clinical trials, EMBASE, Science Direct, Cochrane Library, China National Knowledge Infrastructure (CNKI), Weipu and Wanfang databases were searched to find randomized controlled trials (RCTs) of ornidazole in the treatment of pericoronitis from the establishment of the database to March 15, 2023. Review Manager 5.3 software was used for meta-analysis., Results: A total of 16 RCTs involving 2004 patients were included. The results of the meta-analysis showed that the effective rate of ornidazole treatment was significantly higher than that of the routine treatment group (RR = 1.22, 95% CI (1.15, 1.29), p < 0.001). Ornidazole treatment was beneficial to reduce the oral bacterial density (MD = -26.13, 95% CI (-32.08, -21.51)), time to pain disappearance (MD = -0.64, 95% CI (-0.92, -0.17)) and time to disappearance of redness and swelling of the teeth crown (MD = -1.45, 95% CI (-2.43, -1.01)) compared to the routine treatment (all p = 0.05). No publication bias was found by the funnel plots and Egger test ( p = 0.206)., Conclusions: Ornidazole is effective in the treatment of pericoronitis, with more advantages. Still, the effects and safety of ornidazole in the treatment of pericoronitis need to be evaluated by more high-quality RCTs with larger sample sizes., Competing Interests: The authors declare no conflict of interest., (Copyright: © 2024 Termedia & Banach.)

Legged robots have shown great adaptability to various environments. However, conventional walking gaits are insufficient to meet the motion requirements of robots. Therefore, achieving high-speed running for legged robots has become a significant research topic. In this paper, based on the Spring-Loaded Inverted Pendulum (SLIP) model and the optimized Double leg-Spring-Loaded Inverted Pendulum (D-SLIP) model, the running control strategies for the double flying phase Bound gait and the Rotatory gallop gait of quadruped robots are designed. First, the dynamics of the double flying phase Bound gait and Rotatory gallop gait are analyzed. Then, based on the "three-way" control idea of the SLIP model, the running control strategy for the double flying phase Bound gait is designed. Subsequently, the SLIP model is optimized to derive the D-SLIP model with two touchdown legs, and its dynamic characteristics are analyzed. And the D-SLIP model is applied to the running control strategy of the Rotatory gallop gait. Furthermore, joint simulation verification is conducted using Adams virtual prototyping and MATLAB/Simulink control systems for the designed control strategies. Finally, experimental verification is performed for the double flying phase Bound gait running control strategy. The experimental results demonstrate that the quadruped robot can achieve high-speed and stable running.

Hybrid cocatalysts have great application potential for improving the photocatalytic hydrogen evolution performance of semiconductors. The interfaces between components of hybrid cocatalysts make a great contribution to the improvement, but the associated mechanisms remain unclear. Herein, we prepared and tested three comparative CdS-based photocatalysts with NiS, NiS/Ni 9 S 8 , and Ni 9 S 8 as the cocatalysts separately. The emphasis is placed on investigating the effect of the NiS/Ni 9 S 8 interfaces on the photocatalytic hydrogen evolution performance of CdS. NiS/Ni 9 S 8 exhibits a higher ability than NiS and Ni 9 S 8 in making CdS a more active photocatalyst for water splitting. It shows that NiS, NiS/Ni 9 S 8 , and Ni 9 S 8 perform similarly in terms of promoting the charge transfer and separation of CdS based on steady-state and time-resolved photoluminescence studies. At the same time, the linear sweep voltammetry and electrochemical impedance spectroscopy tests combined with the density functional theory calculations reveal that the component interfaces of NiS/Ni 9 S 8 enable us to lower the water splitting activation energy, the charge-transfer resistance from the cocatalyst to sacrificial agent, and hydrogen adsorption Gibbs free energy. It is evidenced from this work that component interfaces of hybrid cocatalysts play a vital role in accelerating the dynamics of hydrogen evolution reactions.

The development of photoelectrochemical (PEC) water splitting is hindered by the slow kinetics of four-electron processes for the oxygen evolution reaction (OER) and severe charge recombination. Amorphous carbon was chosen as a carrier for the active sites due to its exceptional conductivity and strong loading capacity. In addition, this enhanced performance was attributed to the loading of oxides of cobalt. Here, amorphous carbon-covered cobalt oxides chosen as a co-catalyst loaded on α-Fe 2 O 3 (noted as CoO x @C/Ti-Fe 2 O 3 ) have been synthesized, and they show a high current density (2.86 mA cm -2 under 1.23 V vs. RHE), and a low onset potential (0.611 V vs. RHE). Experimental analysis demonstrates that the charge transfer and separation leading to accelerated OER dynamics and improved PEC performance are enhanced by CoO x @C effectively. This study provides new ideas for designing high-performance photoelectrochemical electrodes based on amorphous carbon co-catalysts.

The kinetic competition between water oxidation/electron extraction processes and recombination behaviors is a key consideration in the development of efficient photoanodes for solar-driven water splitting. Investigating the photogenerated charge behaviors could guide the construction of high-efficiency photoanodes. In this study, the charge carrier kinetics involved in photoelectrochemical water oxidation of PDS/Ti-Fe 2 O 3 were analyzed using surface photovoltage (SPV), transient photovoltage (TPV), short-pulse transient photocurrent (TPC) and photoelectrochemical impedance spectra (PEIS). The TPC results indicate the interfacial electric field introduced by the PDS loading increases the electron extraction and suppresses the bulk recombination, enhancing the spatial separation of photogenerated charges, which is consistent with the SPV and TPV results. Besides, the surface recombination of the back electron (BER) is also attenuated, which enhances the long-lived holes at the surface of PDS/Ti-Fe 2 O 3 photoanode. Similarly, as obtained by PEIS fitting, the loading of PDS accelerates holes transfer at the photoanode/electrolyte interface, and increases the utilization of long-lived holes. In other word, the recombination behaviors of photogenerated charges are restrained both in the bulk and surface of the photoanode after the deposition of PDS, leading to enhanced PEC performance. These findings highlight the importance of understanding charge carrier dynamics in the design of high-efficient photoanodes., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Photocatalytic water splitting holds great promise as a sustainable and cost-effectiveness alternative for the production of hydrogen. Nevertheless, the practical implementation of this strategy is hindered by suboptimal visible light utilization and sluggish charge carrier dynamics, leading to low yield. MXene is a promising cocatalyst due to its high conductivity, abundance of active sites, tunable terminal functional groups, and great specific surface area. Homo-interface has perfect lattice matching and uniform composition, which are more conducive to photogenerated carriers' separation and migration. In this study, a novel ternary heterogeneous photocatalyst, a-TiO 2 /H-TiO 2 /Ti 3 C 2 MXene (MXTi), is presented using an electrostatic self-assembly method. Compared to commercial P25, pristine anatase, and rutile TiO 2 , as-prepared MXTi exhibit exceptional photocatalytic hydrogen evolution performance, achieving a rate of 0.387 mmol h -1 . The significant improvement is attributable to the synergistic effect of homo-interface engineering and Ti 3 C 2 MXene, which leads to widened light absorption and efficient carrier transportation. The findings highlight the potential of interface engineering and MXene cocatalyst loading as a proactive approach to enhance the performance of photocatalytic water splitting, paving the way for more sustainable and efficient hydrogen production., (© 2023 Wiley-VCH GmbH.)

Ti-ZnFe 2 O 4 photoanode has attracted extensive attention in photoelectrochemical (PEC) water oxidation due to its narrow band gap and good photostability. However, its low efficiency limits its development. Herein, we designed and constructed direct Z-scheme Ti-ZnFe 2 O 4 /In 2 O 3 (Ti-ZFO/In 2 O 3 ) photoanode. Under the interface electric field, photogenerated holes with stronger oxidation capacity on In 2 O 3 are retained to participate in the water oxidation reaction, and the photocurrent density of Ti-ZFO/In 2 O 3 is much higher than that of pure Ti-ZFO, reaching 2.2 mA/cm 2 at 1.23 V vs. RHE. Kelvin Probe, steady-state photovoltage spectroscopy (SPV), transient photovoltage spectroscopy (TPV) and in-situ double beam strategy were used to demonstrate the Z-scheme charge transfer mechanism of Ti-ZFO/In 2 O 3 photoanode. Our work provides an effective scheme and technical means for further understanding the mechanism of interfacial charge transfer., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Crack propagation is a critical phenomenon in materials science and engineering, significantly impacting structural integrity, reliability, and safety across various applications. The accurate prediction of crack propagation behavior is paramount for ensuring the performance and durability of engineering components, as extensively explored in prior research. Nevertheless, there is a pressing demand for automated models capable of efficiently and precisely forecasting crack propagation. In this study, we address this need by developing a machine learning-based automated model using the powerful H2O library. This model aims to accurately predict crack propagation behavior in various materials by analyzing intricate crack patterns and delivering reliable predictions. To achieve this, we employed a comprehensive dataset derived from measured instances of crack propagation in Acrylonitrile Butadiene Styrene (ABS) specimens. Rigorous evaluation metrics, including Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and R-squared (R 2 ) values, were applied to assess the model's predictive accuracy. Cross-validation techniques were utilized to ensure its robustness and generalizability across diverse datasets. Our results underscore the automated model's remarkable accuracy and reliability in predicting crack propagation. This study not only highlights the immense potential of the H2O library as a valuable tool for structural health monitoring but also advocates for the broader adoption of Automated Machine Learning (AutoML) solutions in engineering applications. In addition to presenting these findings, we define H2O as a powerful machine learning library and AutoML as Automated Machine Learning to ensure clarity and understanding for readers unfamiliar with these terms. This research not only demonstrates the significance of AutoML in future-proofing our approach to structural integrity and safety but also emphasizes the need for comprehensive reporting and understanding in scientific discourse.

The stability of granules, contaminant removal and microbial structure of an aerobic granular sludge (AGS) process were investigated with a focus on ordinary heterotrophic organisms (OHOs). Long-term stable granules and high removals of COD (97 %), NH 4 + (98 %), P (85 %) and total N (77 %) were achieved. Sequencing analyses identified 6.6 % of phosphorus-accumulating organisms in the sludge, concordant with the observed bio-P removal capacity. However, OHOs were the most abundant bacteria in the sludge (70-93 %) without resulting in unstable aggregates. Under current dogmas of microbial competition in activated sludge, it seemed contradictory that OHOs could persist in the long term in the AGS where COD was depleted beginning in the anaerobic phase. Microbial analyses showed that OHOs could survive in granules by micropredation, proteolysis, fermentation and EPS consumption. Heterotrophic-nitrification/ aerobic-denitrification was an active pathway in the AGS. These findings contribute to a better understanding of microbial competition in AGS and its stability., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Background: Recently, increased risk of amputation under sodium glucose cotransporter-2 inhibitors has been debated. Similar concerns have been raised with other "traditional" diuretics, more particularly in patients with or at risk of lower extremity arterial disease (LEAD)., Aim: To collect all available data on any potential risk of amputation associated with diuretics in patients with or at risk of LEAD. Additionally, we looked for other limb-related events in these patients., Methods: We searched in PubMed, Embase and Scopus databases up to February 2021 for references, using peripheral or lower extremity arterial disease, diuretics and amputation keywords, excluding case reports, experimental animal studies and non-English reports., Results: Among the 1376 hits identified in the databases, six studies were finally included in this review, including one cross-sectional and five longitudinal studies (total of 47,612 participants). One study was limited to thiazide diuretics, one focused on loop diuretics and the remainder mixed all diuretics. All studies reported a significant association between diuretic use and amputation risk in patients with or at high risk of LEAD. Despite some limitations in several studies, the meta-analysis showed an increased risk of amputation associated with diuretics (odds ratio: 1.75, 95% confidence interval: 1.53-1.99; P<0.001). Beyond amputation, patients with or at risk of LEAD under diuretics appeared to be at increased risk of other lower limb events, mostly in the presence of other comorbidities, including diabetes., Conclusions: Although the amount of data in the literature is scarce, this first systematic review and meta-analysis favours an increased risk of amputation in patients with or at risk of LEAD under diuretics. Further prospective studies must be conducted to provide a better understanding of the mechanisms. Meanwhile, the use of diuretics in these patients should be parsimonious, considering alternatives whenever possible., (Copyright © 2023 Elsevier Masson SAS. All rights reserved.)

Background: There is no source of data on causes of death in Senegal that covers both community and hospital deaths. Yet the death registration system in the Dakar region is relatively complete (>80%) and could be expanded to provide information on the diseases and injuries that led to death., Methods: In this pilot study, we recorded all deaths that occurred over 2 months and were reported in the 72 civil registration offices in the Dakar region. We selected the deaths of residents of the region and administered a verbal autopsy to a relative of the deceased to identify the underlying causes of death. Causes of death were assigned using the InterVA5 model., Results: The age structure of deaths registered at the civil registry differed from that of the census, with a proportion of infant deaths about twice as high as in the census. The main causes of death were prematurity and obstetric asphyxia in newborns. Meningitis and encephalitis, severe malnutrition, and acute respiratory infections were the leading causes from 1 month to 15 years of age. Cardiovascular diseases accounted for 27% of deaths in adults aged 15-64 and 45% of deaths among adults above age 65, while neoplasms accounted for 20% and 12% of deaths in these two age groups, respectively., Conclusions: This study demonstrates that the epidemiological transition is at an advanced stage in urban areas of Dakar, and underlines the importance of conducting regular studies based on verbal autopsies of deaths reported in civil registration offices., (© 2023. The Author(s).)

Designing heterojunction photocatalysts imitating natural photosynthetic systems has been a promising approach for photocatalytic hydrogen generation. However, in the traditional Z-Scheme artificial photosynthetic systems, the poor charge separation, and rapid recombination of photogenerated carriers remain a huge bottleneck. To rationally design S-Scheme (i.e., Step scheme) heterojunctions by avoiding the futile charge transport routes is therefore seen as an attractive approach to achieving high hydrogen evolution rates. Herein, a twin S-scheme heterojunction is proposed involving graphitic C 3 N 4 nanosheets self-assembled with hydrogen-doped rutile TiO 2 nanorods and anatase TiO 2 nanoparticles. This catalyst shows an excellent photocatalytic hydrogen evolution rate of 62.37 mmol g -1 h -1 and high apparent quantum efficiency of 45.9% at 365 nm. The significant enhancement of photocatalytic performance is attributed to the efficient charge separation and transfer induced by the unique twin S-scheme structure. The charge transfer route in the twin S-scheme is confirmed by in situ X-ray photoelectron spectroscopy (XPS) and electron spin resonance (ESR) spin-trapping tests. Femtosecond transient absorption (fs-TA) spectroscopy, transient-state surface photovoltage (TPV), and other ex situ characterizations further corroborate the efficient charge transport across the catalyst interface. This work offers a new perspective on constructing artificial photosynthetic systems with S-scheme heterojunctions to enhance photocatalytic performance., (© 2022 Wiley-VCH GmbH.)

Interface modification is an important means to enhance the photovoltaic performance of quantum dot sensitized solar cells (QDSCs). The TiO 2 /CdS/CdSe solar cells are sensitized with CdS QDs and CdSe QDs, which inevitably introduces a new interface to form a recombination center. Therefore, it is necessary to coat a passivation layer in order to effectively inhibit charge recombination at the CdS/CdSe interface. In this work, CuInS 2 (CIS) has been introduced into the CdS/CdSe QD system as an inner passivation layer and the CdS/CIS/CdSe photoanode structure has been fabricated in an environmentally friendly manner. The extracted charge amount ( Q ) is used to express the charge separation efficiency, indicating that we have obtained outstanding charge extraction efficiency in CIS based CdS/CdSe QDSCs. As a result, the photocurrent density of the TiO 2 /CdS/CIS/CdSe photoanode significantly has increased from 19.01 mA cm -2 to 22.74 mA cm -2 (TiO 2 /CdS/CdSe photoanode), which demonstrates a higher photoconversion efficiency of 4.52% in comparison with that of TiO 2 /CdS/CdSe photoanode.

The electro-hydraulic servo system (EHSS) drives the hydraulic quadruped robot, which has the advantages such as high load capacity, fast response velocity, and powerful motion ability. EHSS of single leg consists of three sets of hydraulic drive unit (HDU), which is the joint driver. As a result, HDU control is the fundamental control of the hydraulic quadruped robot, and it controls the robot's motion performance directly. In order to improve the control accuracy and adaptability to different working conditions of impedance control for HDU, a composite control method combining sliding mode control (SMC) and model-based linear extended state observer (MLESO), which is called SMC-MLESO, is designed in this paper. Firstly, the chattering problem of SMC is improved by designing a novel composite reaching law and adding total disturbance to sliding mode control law. Secondly, the parameters of sliding mode surface are calculated by the optimal control. The parameters of MLESO are calculated by the bandwidth of the controller. And the known model of the system is added to observer to reduce the influence of sensor noise. Finally, comparative experiments show that SMC-MLESO has a good control effect. The maximum error of using SMC-MLESO is 0.101 mm and the biggest change of the maximum error is 36.5% under different working conditions, which is better than PI+G cp and PI+G cp +G fp (The two controllers were designed by the author's previous research, which was published by Journal of the Franklin Institute)., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 ISA. Published by Elsevier Ltd. All rights reserved.)

The generation of layered heterostructures with type-II band alignment is considered to be an effective tool for the design and fabrication of a highly efficient photocatalyst. In this work, we design a novel type-II MoS 2 /SiH HTS and investigate its atomic structure, electronic properties and contact types. In the ground state, the MoS 2 /SiH HTS is proved to be structurally and mechanically stable. The MoS 2 /SiH HTS generates type-II band alignment with separation of the photogenerated carriers. Both the electronic properties and contact type of the MoS 2 /SiH HTS can be modulated by an external electric field. The application of a negative electric field leads to a transformation from type-II to type-I band alignment. While the application of a positive electric field gives rise to a transition from semiconductor to metal in the MoS 2 /SiH HTS. These results could provide useful information for the design and fabrication of photoelectric devices on the MoS 2 /SiH HTS., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The slow kinetics and poor structural stability prevent transition metal selenides from being widely used in sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). Herein, the "flower-like" porous carbon anchored by Zn-Mn binary selenides (ZMS@FC) composites are fabricated by selenizing the modified hierarchically metal-organic frameworks. The 2D conductive hierarchically flakes' abundant pore structure and multiple active sites shorten the ion diffusion length and promote conductivity, while the synergistic effect of the binary metals and intrinsic large pseudocapacitive contribution effectively improve capacity and rate performance. ZMS@FC composites exhibit impressive rate capability of 294.4 mA h g -1 at 10 A g -1 and excellent cyclic stability with 369.6 mA h g -1 specific capacity retention at 2 A g -1 after 1000 cycling in SIBs. It is noted that 156.9 mA h g -1 can be retained at 5 A g -1 and 227.0 mA h g -1 is remained after 500 cycles at 2 A g -1 in PIBs. The ex situ X-ray diffraction patterns and transmission electron microscopy pictures are used to confirm the conversion reaction processes of the Zn-Mn-Se. Designing high-performance energy storage materials may benefit greatly from the universal synthesis technology of bimetallic sulfide anodes for enhanced SIBs and PIBs., (© 2022 Wiley-VCH GmbH.)

The American Association of Pharmaceutical Scientists (AAPS) Chemistry, Manufacturing, and Controls (CMC) Community hosted two virtual panel discussions focusing on several novel regulatory review pathways for innovative oncology products: Real-Time Oncology Review (RTOR), Project Orbis, and the Product Quality Assessment Aid (PQAAid). The panel sessions were held on August 27, 2021, for the discussion of RTOR, and January 21, 2022, for the discussion of Project Orbis and the PQAAid. Both panel sessions included representatives from the US Food and Drug Administration (FDA) and subject matter experts from the pharmaceutical and biotechnology industries, with the aim of facilitating knowledge sharing on CMC-specific advantages, challenges, eligibility criteria for participation, and operational modifications instituted through the utilization of these acceleration initiatives. Key topics included managing cross-regional regulatory CMC requirements, adapting to expedited development timelines, coordinating interactions between health authorities and industry, and potential opportunities for future improvement and expansion of these programs. As RTOR, Project Orbis, and PQAAid are relatively new initiatives, the experiences shared by the panel experts are valuable for providing deeper insight into these new regulatory pathways and processes., Competing Interests: Competing interestsThe authors declare that they have no competing interests. The view expressed in this paper are those of the authors and should not be taken as expert instructions or excerpts from their organization., (© The Author(s) 2022.)

Pristine monolayer molybdenum disulfide (MoS 2 ) demonstrates predominant and persistent n-type semiconducting polarity due to the natural sulfur vacancy, which hinders its electronic and optoelectronic applications in the rich bipolarity area of semiconductors. Current doping strategies in single-layer MoS 2 are either too mild to reverse the heavily n-doped polarity or too volatile to create a robust electronic device meeting the requirements of both a long lifetime and compatibility for mass production. Herein, we demonstrate that MoS 2 can be transferred onto polytetrafluoroethylene (PTFE), one of the most electronegative substrates. After transfer, the MoS 2 photoluminescence exhibits an obvious blueshift from 1.83 to 1.89 eV and a prolonged lifetime, from 0.13 to 3.19 ns. The Fermi level of MoS 2 experiences a remarkable 510 meV decrease, transforming its electronic structure into that of a hole-rich p-type semiconductor. Our work reveals a strong p-doping effect and charge transfer between MoS 2 and PTFE, shedding light on a new nonvolatile strategy to fabricate p-type MoS 2 devices.

Pneumoconiosis remains one of the most common and harmful occupational diseases in China, leading to huge economic losses to society with its high prevalence and costly treatment. Diagnosis of pneumoconiosis still strongly depends on the experience of radiologists, which affects rapid detection on large populations. Recent research focuses on computer-aided detection based on machine learning. These have achieved high accuracy, among which artificial neural network (ANN) shows excellent performance. However, due to imbalanced samples and lack of interpretability, wide utilization in clinical practice meets difficulty. To address these problems, we first establish a pneumoconiosis radiograph dataset, including both positive and negative samples. Second, deep convolutional diagnosis approaches are compared in pneumoconiosis detection, and a balanced training is adopted to promote recall. Comprehensive experiments conducted on this dataset demonstrate high accuracy (88.6%). Third, we explain diagnosis results by visualizing suspected opacities on pneumoconiosis radiographs, which could provide solid diagnostic reference for surgeons.

The American Association of Pharmaceutical Scientists (AAPS) Chemistry, Manufacturing, and Control (CMC) Community hosted a virtual panel discussion on December 9, 2020, to provide a forum to discuss N-nitrosamine control strategies in the pharmaceutical and biotechnology industries. The panel included staff from the US Food and Drug Administration (FDA) and industry subject matter experts. Meeting topics included acceptable intake levels for nitrosamine impurities, definitions of "acceptable level of risk," water as a contributor in nitrosamine risk assessments, nitrosamine impurity control strategies based upon fate/purge data, early vs. late development assessment expectations, application to oncology programs developed under ICH S9, and Drug Master File (DMF) regulatory expectations. During the meeting, divergence in global health authority expectations was additionally discussed. One of the most important outputs from this AAPS panel discussion was the criticality of continued dialog between industry and health authorities to help understand actual versus perceived risks and provide pragmatic, scientifically justified solutions to ensure patients are provided with an uninterrupted supply of safe medicines based on globally harmonized requirements., (© 2021. American Association of Pharmaceutical Scientists.)

The practice of conventional medicine is rooted in the ability of a patient to effectively communicate with their physician, and for the physician to comprehend the patient's story and perceive it through the lens of evidence-based practice. In reality, the differences in environmental backgrounds hinders this exchange of information and prevents a shared understanding and strategy. Narrative medicine provides a framework in which this divide can be bridged by encouraging the clinician to develop an appreciation of cultural nuances that drive a patient's decision making. The importance of this practice is highlighted with four stories in which the only path to competent patient management was through the utilization of narrative medicine., Competing Interests: Declaration of Conflicting Interests: The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article., (© The Author(s) 2021.)

Background: A patient-centred approach is increasingly the mandate for healthcare delivery, especially with the growing emergence of chronic conditions. A relevant but often overlooked obstacle to delivering person-centred care is the identification and consideration of all demands based on individual experience, not only disease-based requirements. Mindful of this approach, there is a need to explore how patient demands are expressed and considered in healthcare delivery systems. This study aims to: (i) understand how different types of demands expressed by patients are taken into account in the current delivery systems operated by Health Care Organisations (HCOs); (ii) explore the often overlooked content of specific non-clinical demands (i.e. demands related to interactions between disease treatments and everyday life)., Method: We adopted a mixed method in two cancer centres, representing exemplary cases of organisational transformation: (i) circulation of a questionnaire to assess the importance that breast cancer patients attach to every clinical (C) and non-clinical (NC) demand identified in an exploratory inquiry, and the extent to which each demand has been taken into account based on individual experiences; (ii) a qualitative analysis based on semi-structured interviews exploring the content of specific NC demands., Results: Further to the way in which the questionnaires were answered (573 answers/680 questionnaires printed) and the semi-structured interviews (36) with cancer patients, results show that NC demands are deemed by patients to be almost as important as C demands (C = 6.53/7 VS. NC = 6.13), but are perceived to be considered to a lesser extent in terms of pathway management (NC = 4.02 VS C = 5.65), with a significant variation depending on the type of non-clinical demands expressed. Five types of NC demands can be identified: demands relating to daily life, alternative medicine, structure of the treatment pathway, administrative and logistic assistance and demands relating to new technologies., Conclusions: This study shows that HCOs should be able to consider non-clinical demands in addition to those referring to clinical needs. These demands require revision of the healthcare professionals' mandate and transition from a supply-orientated system towards a demand-driven approach throughout the care pathway. Other sectors have developed hospitality management, mass customisation and personalisation to scale up approaches that could serve as inspiring examples.

Background: The epileptogenicity of recombinant tissue-plasminogen activator (rt-PA) has been suggested, but seizures were not evaluated in randomised controlled trials., Objective: To evaluate whether rt-PA was associated with early seizures in a cohort of consecutive patients with cerebral ischaemia., Method: We included consecutive adults with ischaemic stroke due to large-vessel occlusion from the North-of-France stroke network selected for a mechanical thrombectomy (MT). Patients without contraindication received i.v. rt-PA. We evaluated stroke severity with the National Institutes of Health Stroke Scale (NIHSS), and functional status with the modified Rankin scale (mRS), and recorded epileptic seizures occurring between the end of imaging and day 7. We performed statistics using propensity analyses., Results: We included 1638 patients (783 men, 47.8%; median age 71 years; median NIHSS score 16; 1007 treated by rt-PA, 61.5%), in whom 60 (3.7%) developed early epileptic seizures. After adjustment on propensity scores, early seizures were associated with infections [adjusted odds ratio ( adj OR) 2.86; 95% confidence interval (CI) 1.37-5.95] and delay between stroke recognition and end of MT ( adj OR 1.04 for 10 min more; 95% CI 1.01-1.08), but not with rt-PA ( adj OR 1.35; 95% CI 0.55-3.33). The propensity-matched analysis of 343 pairs of patients found no difference in the occurrence of early seizures between those with and without rt-PA (p = 0.386)., Conclusion: We found no significant association between rt-PA and early epileptic seizures. If rt-PA has the potential for epileptogenicity, the magnitude of the effect should be modest compared to its favourable effect on functional outcome.

The Stability Community of the American Association of Pharmaceutical Scientists (AAPS) held a virtual workshop on "Vaccine Stability Considerations to Enable Rapid Development and Deployment", on March 24-25, 2021. The workshop included distinguished speakers and panelists from across the industry, academia, regulatory agencies, as well as health care leaders. This paper presents a review of the topics covered. Specifically the challenges in accelerating vaccine development and analytical characterization techniques to establish shelf-life were covered. Additionally, vaccine stability modeling using prior knowledge stability models and advanced kinetic analysis played a key in the EUA approaches discussed during the workshop. Finally, the role of stability studies in addressing the challenges of vaccine distribution and deployment during the pandemic were a focus of presentations and panel discussions. Although the workshop did not have any presentation topics directly dedicated to the mRNA vaccines, the techniques discussed are generally applicable. The mRNA vaccine developers were represented in the panel discussions, where experts involved in the EUA approval/deployment stages for this vaccine type could discuss the challenges as applied to their vaccines., Competing Interests: Competing InterestsThe authors declare that they do not have any competing interests. The view expressed in this paper are those of the authors and should not be taken as expert instructions or excerpts from their organization., (© The Author(s) 2021.)

Background: Zoonoses are an increasing concern worldwide, particularly in low- and middle-income countries. People with close contact with animals are at high risk for contracting and transmitting the zoonotic diseases., Objectives: To determine health literacy of livestock farmers toward biosecurity to prevent zoonotic diseases., Methods: This cross-sectional mixed-methods study was conducted in Thai Nguyen Province, Vietnam, where livestock and farming are the main occupation. The questionnaire survey was submitted to 218 farmers who have close contact with livestock. In addition, 8 farmers were invited to an in-depth interview to further explore the health literacy., Results: Half of the participants were men. The average age (standard deviation) of the participants was 49.3(11.5) years. The median years with experience in farming was 15 years. The majority (82.0%) of the participants had moderate health literacy level regarding zoonoses. Improper use of antibiotics was referred by 58.0% of participants, including antibiotic use as feeding supplements (34.0%) and the use of human antibiotics to treat sick animals (24.0%). Many participants were unaware of zoonotic prevention measures and due to this had practices such as not wearing protective equipment (60.0%), an absence of acaricides to prevent vector infestations (52.0%), an absence of disinfection measures (42.0%), low rate of rabies vaccination (54.0%), and do not quarantining sick animals (38.0%). In-depth interviews revealed great concern among farmers about a collective lack of participation from local veterinarians, health workers, and government authorities in zoonoses-prevention efforts. Statistical models showed that farm scale, ethnic groups, and perceived income were associated with the overall health literacy about zoonoses., Conclusion: Comprehensive health education related to zoonotic diseases is recommended to improve overall knowledge, including routes of transmission, symptoms and consequences of diseases, and antibiotic usage. In addition, guidance should be provided to farmers on how to treat sick animals, the appropriate use of antibiotics, and waste management. Local veterinarians and health workers are important contact points and should work closely with the farmers to prevent zoonotic diseases., Competing Interests: Declaration of Conflicting Interests:The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article., (© The Author(s) 2020.)

The largest contributor to pollutant emissions is the sintering process in steel industry. Ultra-low emission policy for the Chinese steel industry states that emission concentrations of particulate matter, SO 2 and NO x should not exceed 10, 35 and 50 mg/m 3 respectively. The emission concentrations of the steel industry are the same as the ultra-low emission policy for the coal-fired power industry, but the pollutant control technologies of the two industries are different. Life cycle assessment method is applied to analyze the latest ultra-low treatment process for sintering flue gas emissions which includes electrostatic precipitation, ozone oxidation, wet desulfurization, wet denitration, condensation dehumidification and wet electrostatic precipitation. Following this novel ultra-low emission treatment, the concentrations of particulate matter, SO 2 , NO x , and PCDDs in the sintering flue gas decreased very significantly, attaining the new emission standard. With 1 ton of sinter as the functional unit and "cradle to gate" as the system boundary, the environmental impact of the process is 0.1811 and the total economic cost is 172.79 RMB, of which internal cost is 34.64 RMB and external cost is 138.15 RMB. The main environmental impacts result from applying the wet denitration and ozone oxidation processes. Sodium sulfite in the wet denitration process, and electricity and liquid oxygen in the ozone oxidation process are the key inputs that cause environmental impact. These findings are useful for a further optimization of the ultra-low emissions process from both the environmental and economic perspective, which is applicable in other regions of the world., Competing Interests: Declaration of competing interest There are no conflicts to declare., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Although the bioavailability and stability of curcumin can be greatly improved by liposomes encapsulation, its application is still limited due to the short circulating time. In this present work, we aim to construct a long-circulating delivery system of liposomal curcumin (Cur-Lips) by coating bovine serum albumin (BSA), namely, BSA-coated liposomal curcumin (BSA-Cur-Lips). The effects of coating albumin on the physicochemical properties of Cur-Lips were investigated. It was found that BSA-Cur-Lips was more spherical, more homogeneous in size, and significantly larger than Cur-Lips. Combining sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), Coomassie bright blue staining, and X-ray photoelectron spectroscopy analysis (XPS), we confirmed that albumin molecules were stably located on the surface of BSA-Cur-Lips. In addition, the impacts of the coating albumin on the Cur-Lips release and phagocytosis by mouse macrophages Raw264.7 in vitro were investigated. We found that no significant initial burst drug release effect was observed for both Cur-Lips and BSA-Cur-Lips and the presence of albumin can enhance the liposome structure stability and slow down the release of Cur. More importantly, the macrophage phagocytosis of Cur-Lips was significantly reduced after coating albumin. In conclusion, coating albumin is a promising approach for developing a long-circulating delivery system of liposomal curcumin, and its properties including low phagocytosis, slow drug release, enhanced stability, and nontoxicity give this system great prospects for practical use., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

Background and Objectives: Blood transfusion is inherently associated with risks, and little is known regarding the available quality and safety measures in developing countries. No studies or census has been carried out, and therefore, no data on this compelling issue are available., Materials and Methods: Data emanating from eight Arabic eastern/southern Mediterranean countries who responded to five surveys were collected and tabulated., Results: Asepsis during phlebotomy, screening for serological and immuno-haematological parameters and appropriate storage conditions are maintained across all countries. Variations in blood component processing exist. Universal leucoreduction is systematically applied in Lebanon. Nucleic acid testing is only performed in Egypt. Aphaeresis procedure, leucoreduction and quality control for blood components are virtually inexistent in Mauritania. Written donor questionnaire is absent in Algeria and Tunisia. Most donor deferral periods for infectious agents are inconsistent with international standards., Conclusion: Gaps in the processing and in the quality/safety measures applied to the manufacture of blood components are quite evident in most eastern/southern Mediterranean countries. The decision of establishing an effective collaboration network and an independent body - aside from WHO - composed of specialists that oversees all transfusion activities in these countries is certainly a crucial step towards ensuring an optimum level of blood safety., (© 2020 International Society of Blood Transfusion.)

Objective: Neck management in cT1-2N0 tongue squamous cell carcinoma (SCC) remains controversial. Our goal was to compare the survival difference between PET-CT-guided neck dissection and elective neck dissection (END) for the treatment of cT1-2 tongue SCC. Methods: Patients with surgically treated cT1-2N0 tongue SCC were retrospectively enrolled. These patients were divided into two groups. Group A: The decision of whether to perform neck dissection was mainly based on the results of preoperative PET-CT examinations. Group B: Patients received END treatment without preoperative PET-CT examinations. The study endpoints were regional control (RC) and disease-specific survival (DSS). The Kaplan-Meier method was used to calculate the survival rates. Results: Group A consisted of 66 patients, and 16 patients underwent neck dissection owing to positive PET-CT results. Group B consisted of 169 patients. The 5-year RC rates in group A and group B were 86 and 87%, respectively, and the difference was not significant ( p = 0.731). The 5-year DSS rates in group A and group B were 93 and 90%, respectively, and the difference was not significant ( p = 0.583). Conclusions: Neck dissection can be safely avoided when the PET-CT scan reveals no neck lymph node involvement., (Copyright © 2020 Zhu, Sun and Ba.)

Objective: This study aimed to compare the cartilage regeneration of the stromal vascular fraction (SVF) cells and adipose-derived mesenchymal stem cells (ASCs) cocultured with chondrocytes seeded on the scaffolds., Methods: The cellular morphologies and proliferation capabilities on the scaffolds were evaluated. The scaffolds with the cocul-ture of ASCs/SVF and chondrocytes were implanted into the full thickness cartilage defective rabbit joints for 10 weeks., Results: The cells seeded into the scaffolds showed good adhesion and proliferation. Implantation with SVF and chondrocytes revealed desirable in vitro healing outcomes., Conclusions: The SVF cells were better than ASCs in terms of the formation of cartilage matrix in a coimplantation model. Without in vitro expansion, the SVF cells are good cell sources for cartilage repair.

Objective: We aimed to clarify the significance of PET-CT for detecting occult lymph node metastasis and for affecting prognosis in early-stage tongue squamous cell carcinoma (SCC). Methods: Patients with surgically treated primary cT1-2N0 tongue SCC who agreed to undergo a preoperative PET-CT scan were prospectively enrolled. The primary study outcomes were occult neck lymph node metastasis and locoregional control (LRC). The Kaplan-Meier method was used to analyze the LRC rate, and then the factors that were significant in the Kaplan-Meier method were assessed in the Cox model to determine the independent factors. Results: A total of 135 patients were included, and the median maximum standardized uptake value (SUV max) of the primary tumor was 9.0. When analyzing the PET-CT results, 18 patients were recognized as having neck lymph node metastasis, and 12 patients were proven to have pathologic lymph nodes. A total of 117 patients did not have neck lymph node metastasis reported by PET-CT, and five patients were proven to have pathologic lymph nodes. The sensitivity and specificity of PET-CT for predicting occult metastasis were 70.6 and 94.9%, respectively. In patients with an SUV max ≤ 9.0, the 5-year LRC rate was 95%; in patients with an SUV max >9.0, the 5-year LRC rate was 85%, and the difference was significant. Further Cox model analyses confirmed the independence of the SUV max for predicting LRC. Conclusion: PET-CT has a high specificity for predicting occult lymph node metastasis, and an SUV max >9.0 is significantly associated with worse LRC in cT1-2N0 tongue SCC., (Copyright © 2020 Zhao, Sun, Ba and Zhang.)

Electronics allowing for visible light to pass through are attractive, where a key challenge is to make the core functional units transparent. Here, it is shown that transparent electronics can be constructed by epitaxial growth of metal-organic frameworks (MOFs) on single-layer graphene (SLG) to give a desirable transparency of 95.7% to 550 nm visible light and an electrical conductivity of 4.0 × 10 4 S m -1 . Through lattice and symmetry match, collective alignment of MOF pores and dense packing of MOFs vertically on SLG are achieved, as directly visualized by electron microscopy. These MOF-on-SLG constructs are capable of room-temperature recognition of gas molecules at the ppb level with a linear range from 10 to 10 8 ppb, providing real-time gas monitoring function in transparent electronics. The corresponding devices can be fabricated on flexible substrates with large size, 3 × 5 cm, and afford continuous folding for more than 200 times without losing conductivity or transparency., Competing Interests: The authors declare no conflict of interest., (© 2020 The Authors. Published by WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

Objectives: To outline and analyse the national organisation, infrastructure and management of transfusion systems in countries sharing common historical, cultural and economic features and to decipher management trends, in order to potentially benchmark., Background: Little is known regarding transfusion systems in Eastern/southern Mediterranean at a time international organisations are calling for the establishment of a safe and sustainable blood system., Materials and Methods: Data emanating from eight Arabic-speaking Eastern/Southern Mediterranean countries who responded to five surveys were collected and tabulated., Results: While similarities in terms of supervision by national authorities, authorization of blood centres, quality control and management information system are evident, some significant divergence between these countries do exists. Only Lebanon does not possess a national blood establishment or organisation for blood supply. Blood components are fully government-subsidised in Algeria and Mauritania. Algeria, Morocco and Tunisia have a blood supply that relies mainly on Voluntary non-remunerated donors. Plateletpheresis is performed in all countries except Mauritania while plasmapheresis exists only in Algeria and Egypt. Morocco is the sole country outsourcing its plasma for Plasma derived products., Conclusion: Despite the various challenges facing these countries, lot of progresses have been made so far in the field of transfusion medicine. Yet, nationally coordinated blood programs overviewed by national regulatory authorities and actively supported by local governments are still needed to ensure the optimum level of blood safety., (© 2020 British Blood Transfusion Society.)

Curcumin (CURC) is a hydrophobic molecule and its water solubility can be greatly improved by liposome encapsulation. However, investigations on the stability of pH-sensitive molecules incorporated into liposomal membranes are limited. In this study, CURC-loaded liposomes with varied internal pH values (pH 2.5, 5.0, or 7.4) were prepared and designated as CURC-LP (pH 2.5), CURC-LP (pH 5.0), and CURC-LP (pH 7.4). Physical properties including particle size, ζ-potential, morphology, entrapment efficiency, and physical stabilities of these CURC-LPs were assessed. In addition, the chemical stability of liposomal CURC to different external physiological environments and internal microenvironmental pH levels were investigated. We found that among these CURC-LPs, CURU-LP (pH 2.5) has the highest entrapment efficiency (73.7%), the best physical stabilities, and the slowest release rate in vitro. Liposomal CURC remains more stable in an acid external environment. In the physiological environment, the chemical stability of liposomal CURC is microenvironmental pH-dependent. In conclusion, we prove that the stability of liposomal CURC is external physiological environment- and internal microenvironmental pH-dependent. These findings suggest that creating an acidic microenvironment in the internal chamber of liposomes is beneficial to the stability of liposomal CURC, as well as for other pH-sensitive molecules., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

Background: Lumbar vertebrae carry the greatest load from the spinal column, often leading to several pathologies, including degenerative disc disease (DDD), potentially disturbing spinal movement patterns. Mobilisation increases hypomobile segment mobility, however there is little evidence on mobilisation in patients suffering from different types of DDD., Objective: To assess the efficacy of mobilisation in young patients with DDD, as diagnosed by MRI., Methods: Thirty patients (24-35 years) participated in this study, and were divided into two groups, based on progression levels of DDD diagnosed by MRI (protrusion-PRO/extrusion-EXT). Twenty sessions of sustained stretch mobilisation (grade III) were applied to both groups over four weeks. Numeric Rating Scale (NRS), Oswestry Disability Index (ODI), straight leg raise (SLR), passive lumbar extension (PLE) and lumbar range of motion (ROM) assessed outcome variables. Three trial stages were investigated: pre-therapy (1), post-therapy (2) and follow-up (3)., Results: Age (p= 0.007) and NRS (p= 0.002) were significantly different before therapy. Patient outcomes were significantly improved for all parameters in both groups, except SLR which improved in the EXT group only (p= 0.043)., Conclusions: Applied treatments improved patient outcomes and were statistically significant in both groups, however, better outcomes were observed in the EXT group during follow-up. Mobilisation was a safe and effective procedure for the treatment of DDD.

Chondral defects are challenging to repair because of the poor self-healing capacity of articular cartilage. The aim of this study was to compare and investigate the cartilage regeneration of stromal vascular fraction (SVF) cells and adipose-derived stem cells (ASCs) co-cultured with chondrocytes seeding on scaffolds composed of polyhydroxybutyrate (PHB)/poly-(hydroxybutyrate-co-hydroxyhexanoate) (PHBHHx). In this study, the cellular morphologies and proliferation capabilities on scaffolds were evaluated. Next, scaffolds with 1:1 co-culture of ASCs/SVF and chondrocytes were implanted into the full-thickness cartilage defects in rabbit knee for 10 weeks. Cells seeded on the scaffolds showed better adhesion, migration, and proliferation in vitro. Importantly, implantation with scaffolds with SVF and chondrocytes revealed more desirable in vivo healing outcomes. Our results illustrate a one-step surgical procedure for the regeneration of focal cartilage defects using a mixture of SVF from adipose tissue and uncultured chondrocytes.