Search

Marine biofouling is considered one of the major biophysical processes influencing the vertical dynamics of plastic debris in seawater. We numerically implement, for the first time, this mechanism within a fine-resolution, regional model of the Tyrrhenian Sea, in order to simulate the dispersion of microplastics (MPs) released at the mouth of a highly polluting river. Four polymers and three particle sizes are used to quantify algal concentration influence on the trajectories, fates, and accumulation spots of the tracked MPs, by comparing 2002 winter and summer runs encompassing or not biofouling. Besides a marked seasonality for most of the MP types and radii tested, biofouling effects are prominently observed for only 2 polymers and particles bigger than 1μm. Thus, further realistic applications of the biofouling mechanism in oceanic circulation models are required to achieve a thorough assessment of its impact on plastic density within distinctive basins of the world seas., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The combination of flow elasticity and inertia has emerged as a viable tool for focusing and manipulating particles using microfluidics. Although there is considerable interest in the field of elasto-inertial microfluidics owing to its potential applications, research on particle focusing has been mostly limited to low Reynolds numbers (Re<1), and particle migration toward equilibrium positions has not been extensively examined. In this work, we thoroughly studied particle focusing on the dynamic range of flow rates and particle migration using straight microchannels with a single inlet high aspect ratio. We initially explored several parameters that had an impact on particle focusing, such as the particle size, channel dimensions, concentration of viscoelastic fluid, and flow rate. Our experimental work covered a wide range of dimensionless numbers (0.05 < Reynolds number < 85, 1.5 < Weissenberg number < 3800, 5 < Elasticity number < 470) using 3, 5, 7, and 10 µm particles. Our results showed that the particle size played a dominant role, and by tuning the parameters, particle focusing could be achieved at Reynolds numbers ranging from 0.2 (1 µL/min) to 85 (250 µL/min). Furthermore, we numerically and experimentally studied particle migration and reported differential particle migration for high-resolution separations of 5 µm, 7 µm and 10 µm particles in a sheathless flow at a throughput of 150 µL/min. Our work elucidates the complex particle transport in elasto-inertial flows and has great potential for the development of high-throughput and high-resolution particle separation for biomedical and environmental applications., Competing Interests: Conflict of interestThe authors declare no competing interests., (© The Author(s) 2024.)

We investigate the buckling dynamics of an elastic filament impacted axially by a falling liquid droplet, and identify the buckling modes through a combination of experimental and theoretical analyses. A phase diagram is constructed on a plane defined by two primary parameters: the falling height and the filament length. Two transition boundaries are observed, with one marking the occurrence of dynamic buckling and the other separating the buckling regime into two distinct modes. Notably, the hydrodynamic viscous force of the liquid dominates during the impact, with the dynamic buckling instability predicted by a single elastoviscous number. The critical load is twice the critical static load, which is, however, lower for the deformable droplet utilized in our study, as compared to a solid object. An additional time-dependent simulation on a longer filament exhibits a higher buckling mode, succeeded by a more distinct coarsening process than our experimental observations.

We present a new and efficient phase-field solver for viscoelastic fluids with moving contact line based on a dual-resolution strategy. The interface between two immiscible fluids is tracked by using the Cahn-Hilliard phase-field model, and the viscoelasticity incorporated into the phase-field framework. The main challenge of this approach is to have enough resolution at the interface to approach the sharp-interface methods. The method presented here addresses this problem by solving the phase field variable on a mesh twice as fine as that used for the velocities, pressure, and polymer-stress constitutive equations. The method is based on second-order finite differences for the discretization of the fully coupled Navier-Stokes, polymeric constitutive, and Cahn-Hilliard equations, and it is implemented in a 2D pencil-like domain decomposition to benefit from existing highly scalable parallel algorithms. An FFT-based solver is used for the Helmholtz and Poisson equations with different global sizes. A splitting method is used to impose the dynamic contact angle boundary conditions in the case of large density and viscosity ratios. The implementation is validated against experimental data and previous numerical studies in 2D and 3D. The results indicate that the dual-resolution approach produces nearly identical results while saving computational time for both Newtonian and viscoelastic flows in 3D., (© 2022 The Authors. International Journal for Numerical Methods in Fluids published by John Wiley & Sons Ltd.)

Symmetry breaking (SB) of fluid-structure interaction problems plays an important role in our understanding of animals' locomotive and sensing behaviors. In this Letter, we study the SB of flexible filaments clamped at one end and placed in a spanwise periodic array in Stokes flow. The equilibrium state of the filament along the streamwise direction loses stability and experiences two-dimensional and then three-dimensional SBs as the spanwise distance increases, or as the filament rigidity reduces. For slightly deformed filaments, the viscous and pressure forces are commensurate, while for extremely deformed filaments the viscous force becomes dominant.

Multiphase shear flows often show banded structures that affect the global behavior of complex fluids e.g. in microdevices. Here we investigate numerically the banding of emulsions, i.e. the formation of regions of high and low volume fractions, alternated in the vorticity direction and aligned with the flow (shear bands). These bands are associated with a decrease of the effective viscosity of the system. To understand the mechanism of experimentally observed banding, we have performed interface-resolved simulations of the two-fluid system. The experiments were performed starting with a random distribution of droplets, which under the applied shear, evolve in time resulting in a phase separation. To numerically reproduce this process, the banded structures are initialized in a narrow channel confined by two walls moving in opposite directions. We find that the initial banded distribution is stable when droplets are free to merge and unstable when coalescence is prevented. In this case, additionally, the effective viscosity of the system increases, resembling the rheological behavior of suspensions of deformable particles. Droplet coalescence, on the other hand, allows emulsions to reduce the total surface of the system and, hence, the energy dissipation associated with the deformation, which in turn reduces the effective viscosity.

We perform direct numerical simulations of the flow through a model of deformable porous medium. Our model is a two-dimensional hexagonal lattice, with defects, of soft elastic cylindrical pillars, with elastic shear modulus G, immersed in a liquid. We use a two-phase approach: the liquid phase is a viscous fluid and the solid phase is modeled as an incompressible viscoelastic material, whose complete nonlinear structural response is considered. We observe that the Darcy flux (q) is a nonlinear function - steeper than linear - of the pressure-difference (ΔP) across the medium. Furthermore, the flux is larger for a softer medium (smaller G). We construct a theory of this super-linear behavior by modelling the channels between the solid cylinders as elastic channels whose walls are made of material with a linear constitutive relation but can undergo large deformation. Our theory further predicts that the flow permeability is an universal function of ΔP/G, which is confirmed by the present simulations.

A numerical and theoretical study of yield-stress fluid flows in two types of model porous media is presented. We focus on viscoplastic and elastoviscoplastic flows to reveal some differences and similarities between these two classes of flows. Small elastic effects increase the pressure drop and also the size of unyielded regions in the flow which is the consequence of different stress solutions compare to viscoplastic flows. Yet, the velocity fields in the viscoplastic and elastoviscoplastic flows are comparable for small elastic effects. By increasing the yield stress, the difference in the pressure drops between the two classes of flows becomes smaller and smaller for both considered geometries. When the elastic effects increase, the elastoviscoplastic flow becomes time-dependent and some oscillations in the flow can be observed. Focusing on the regime of very large yield stress effects in the viscoplastic flow, we address in detail the interesting limit of 'flow/no flow': yield-stress fluids can resist small imposed pressure gradients and remain quiescent. The critical pressure gradient which should be exceeded to guarantee a continuous flow in the porous media will be reported. Finally, we propose a theoretical framework for studying the 'yield limit' in the porous media., Competing Interests: Conflict of interestThe authors declare that they have no conflict of interest., (© The Author(s) 2019.)

Self-assembly of soft matter, such as droplets or colloids, has become a promising scheme to engineer novel materials, model living matter, and explore non-equilibrium statistical mechanics. In this article, we present detailed numerical simulations of few non-Brownian droplets in various flow conditions, specifically, focusing on their self-assembly within a short distance in a three-dimensional (3D) microfluidic channel, cf. [Shen et al., Adv. Sci., 2016, 3(6), 1600012]. Contrary to quasi two-dimensional (q2D) systems, where dipolar interaction is the key mechanism for droplet rearrangement, droplets in 3D confinement produce much less disturbance to the underlying flow, thus experiencing weaker dipolar interactions. Using confined simple shear and Poiseuille flows as reference flows, we show that the droplet dynamics is mostly affected by the shear-induced cross-stream migration, which favors chain structures if the droplets are under an attractive depletion force. For more compact clusters, such as three droplets in a triangular shape, our results suggest that an inhomogeneous cross-sectional inflow profile is further required. Overall, the accelerated self-assembly of a small-size droplet cluster results from the combined effects of strong depletion forces, confinement-mediated shear alignments, and fine-tuned inflow conditions. The deterministic nature of the flow-assisted self-assembly implies the possibility of large throughputs, though calibration of all different effects to directly produce large droplet crystals is generally difficult.