Search

Two frequency combs emitting from a single cavity are of great potential in the field of dual-comb spectroscopy because they are mutually coherent and therefore the common mode noise can be suppressed naturally. However, it is difficult to fully and flexibly control the repetition frequency difference in most of the all-optical schemes. In this paper, a birefringence-compensation Kerr resonator is proposed for the mutual dual-comb generation. It is shown that by offset aligning the fast and slow axis with appropriate fiber length, the total birefringence of the cavity can be equalized while the local one keeps at a high level. Theoretical investigations reveal that the polarization decoupled mutual dual-comb can be generated with nearly the same power level and arbitrary repetition frequency difference. Additionally, a numerical model of polarization-maintaining fiber (PMF) with near-zero dispersion is proposed for the proof of the concept. Based on this fiber, the coherent polarization-decoupled dual-comb with 10-dB bandwidth of 33 nm can be obtained. And the repetition frequency difference can be flexibly tuned compared to the cavity without offset alignment.

Curvature measurement plays an important role in structural health monitoring, robot-pose measuring, etc. High-resolution curvature measurement is highly demanded. In this paper, an optical curvature sensor with high resolution based on in-fiber Mach-Zehnder interferometer (MZI) and microwave photonic filter (MPF) is proposed and experimentally demonstrated. The in-fiber MZI is constructed with a ring-core fiber (RCF) which is fusion spliced between two coreless fibers (CLFs). The structure of CLF-RCF-CLF is then sandwiched between two segments of single-mode fiber (SMF), making the whole interferometer structure of SMF-CLF-RCF-CLF-SMF. The operating principle is that different curvatures will cause the variations of the interference spectrum of MZI due to elastic-optic effect, and then the variations are converted into the frequency-shift of the MPF. The factors affecting the visibility of the interference spectrum are researched. A preliminary exploration of the multiplexing demodulation for the in-fiber-MZIs is also investigated and discussed, which is for the first time to the best of our knowledge, holding great potential to pave the way for constructing the sensing network composed of interferometric sensors. The curvature measurement sensitivity is -147.634 MHz/m -1 , and the resolution is 6.774 × 10 -6 m -1 which is the highest value up to now.

Long-range surface plasmon resonances (LRSPRs) are featured with longer propagation and deeper penetration, compared with conventional surface plasmon resonances (SPRs). Thus, LRSPR-based fiber sensors are considered to have great potential for highly sensitive detection in chemistry or biomedicine areas. Here, we propose and demonstrate a near-infrared LRSPR sensor based on a D-shaped honeycomb microstructured optical fiber (MOF) directly coated with gold film. Although there is no additional heterogeneous buffer layer, the optical field of the long-range surface plasmon polariton (LRSPP) mode penetrates strongly into the analyte region. Thus the effective refractive index of the LRSPP mode depends highly on the analyte's material refractive index and an abnormal dispersion relationship between the LRSPP mode and MOF's y-polarized core mode is observed. The mechanism of the LRSPR excitation in the coupling zone is attributed to an avoided crossing effect between these two modes. It also results in the generation of a narrow-bandwidth peak in the loss spectrum of the core mode. Further discussion shows that the resonance wavelength is mainly determined by the core size that is contributed by the MOF's cladding pitch, silica-web thickness and planar-layer-silica thickness together. It indicates that the operation wavelength of the proposed LRSPR device can be flexibly tuned in a broadband wavelength range, even longer than 2 µm, through appropriately designing the MOF's structural parameters. Finally, the proposed LRSPR sensor shows the highest wavelength sensitivity of 14700 nm/RIU and highest figure of merit of 475 RIU -1 for the analyte refractive index range from 1.33 to 1.39.

The optical attractive force in tapered single-mode fibers (SMFs) is usually uniformly distributed around the tapered section and has been found to be important for trapping and manipulating targeted atoms and nanoparticles. In contrast, a peculiar phenomenon of the evanescent field splitting along the azimuth axis can be experimentally observed by tapering a weakly-coupled MCF into a strongly-coupled MCF to generate supermode interference. Moreover, the supermode interference produces a hexagonally distributed evanescent field and its six vertices give rise to the multiline optical attractive force. For such spectral resonances, the optimum extinction ratio for the transmission dips is given by 47.4 dB, this being determined using an index liquid to cover the tapered MCF. The resonant dips move to a greater extent at longer wavelengths, with the optimum tuning efficiency of 392 nm/RIU for index sensing. The split evanescent fields respectively attract the excited upconversion nanoparticles in the liquid to be linearly aligned and running down the tapered region over the fiber surface, emitting green light with 60° symmetry. The charged nanoparticles were periodically self-organized, with a period of around 1.53 µm. The parallel lines, with 60° rotational symmetry, can be useful for (1) indicating the exact locations of the side-cores or orientations of the tapered MCF; (2) as precision alignment keys for micro-optical manipulation; and (3) enhancing the upconversion light, or for use in lasers, coupling back to the MCF. The split evanescent fields can be promising for developing new evanescent field-based active and passive fiber components with nano-structures.

In quasi-distributed fiber Bragg grating (FBG) sensor networks, challenges are known to arise when signals are highly overlapped and thus hard to separate, giving rise to substantial error in signal demodulation. We propose a multi-peak detection deep learning model based on a dilated convolutional neural network (CNN) that overcomes this problem, achieving extremely low error in signal demodulation even for highly overlapped signals. We show that our FBG demodulation scheme enhances the network multiplexing capability, detection accuracy and detection time of the FBG sensor network, achieving a root-mean-square (RMS) error in peak wavelength determination of < 0.05 pm, with a demodulation time of 15 ms for two signals. Our demodulation scheme is also robust against noise, achieving an RMS error of < 0.47 pm even with a signal-to-noise ratio as low as 15 dB. A comparison on our high-performance computer with existing signal demodulation methods shows the superiority in RMS error of our dilated CNN implementation. Our findings pave the way to faster and more accurate signal demodulation methods, and testify to the substantial promise of neural network algorithms in signal demodulation problems.

Sensors based on Fano resonance (FR) have become a promising platform for various biological and chemical applications. However, most investigations on FR are limited to the generation of individual resonance. In this paper, based on the coupling between surface plasmon polariton (SPP) and two photonic waveguide modes, a dual-FR system is designed and analyzed. To explain the coupling mechanism, an extended temporal coupled-mode model is established to provide the physical insight. The spectral response obtained from the model matches well with the numerical one. Due to the decoupled nature of the FRs, a self-calibrated or dual-parameter sensing scheme for refractive index and temperature is proposed. The refractive index sensitivity up to 765 nm/RIU and temperature sensitivity up to 0.087 nm/°C are obtained by wavelength interrogation with figure-of-merit (FOM) up to 33260.9 RIU -1 and 3.78 °C -1 respectively. The proposed sensor provides great potential in fields of the multi-parameter sensing.

Recent progress in optical fiber Mach-Zehnder interferometers (MZIs) has gained many achievements in sensing application. However, the strain sensitivity of optical fiber MZIs is low due to the low elasto-optical coefficient of silica. In this Letter, we propose and demonstrate a method to modulate the guided modes in an MZI based on a special hollow core microstructured optical fiber (HCMOF) by fabricating periodical deformations. Specifically, periodical deformations reduce the extinction ratio of the transmission spectrum. Furthermore, the axial tension modulates these periodical deformations, leading to the enhanced strain sensitivity in comparison to the configuration without deformations. In our experiment, the strain response from 0 to 1000µε is obtained with a sensitivity of 0.00359 d B /µε corresponding to an improvement of 13 times compared with a sensor based on same HCMOF without deformations.

Aqueous secondary Ni-Fe batteries with superior energy density, cost-effectiveness, and outstanding safety contribute significantly toward the development of portable and wearable energy storage devices with high performance. However, the common electrode materials are nickel/iron or their oxides which have suffered from poor conductivity and cycle performance. As an ideal candidate to address these issues, metal phosphides may offer outstanding theoretical specific capacity, low conversion potential, and impressive redox. In this study, one novel type of high-performance flexible Ni-Fe battery with binder-free electrodes on conductive fiber substrates is successfully designed and fabricated. Carbon nanotube fibers with the direct grown hierarchical NiCoP nanosheet arrays and FeP nanowire arrays are fabricated first using hydrothermal synthesis and then the pursuant gas phosphating process. With the assistance of the PVA-KOH gel electrolyte, our fiber-shaped aqueous rechargeable battery (FARB) presents negligible capacity loss after bending 3000 times. Meanwhile, the assembled FARB has a significant capacity of 0.294 mA h/cm 2 under the current density of 2 mA/cm 2 and a high energy density of 235.6 μW h/cm 2 .

The performance of sensors, including optical fiber sensors, is commonly limited by the tradeoff between a large dynamic range and a high resolution. In this Letter, in order to optimize both, we propose an inline multimode interferometer sensor based on a suspended-core microstructured optical fiber. Due to the existence of multiple pairs of mode interferences, the transmission spectrum of the interferometer consists of dense fringes modulated by a lower envelope. Since these mode interferences take place in the uniform material with the same length, the dense fringes and the lower envelope have an identical sensing response without crosstalk. Hence, the sensor integrates the large dynamic range of the lower envelope and the high resolution of the dense fringes. Strain-sensing performance is investigated to validate the characteristic of the large dynamic range and the high resolution of the proposed sensor. The dynamic range, theoretically 0-9200 µɛ, is 12 times larger than for the dense fringes, and the resolution is 17.5 times higher than for the lower envelope.

Rapid progress in real-time spectroscopy uncovers the spatio-spectral scenarios of ultrashort pulses in dissipative systems. Varieties of transient soliton dynamics on different timescales have been revealed. Here, we report on an experimental observation of stationary and pulsating vector dissipative solitons in a nonlinear multimode interference (NL-MMI) based fiber laser with net normal dispersion. Polarization non-discrimination of the NL-MMI mode-locking facilitates the dissipative soliton trapping process. Two orthogonally polarized components are coupled together through oppositely shifting their central frequencies to form the group-velocity-locked vector dissipative solitons (GVLVDSs). Dispersive Fourier transform (DFT) based polarization resolved measurement enables insights into the transient polarization dynamics and the long-term evolution. Particularly, both stationary and pulsating GVLVDSs are obtained with appropriate parameter settings. It is found that the quasi-stationary pulsating manner is accompanied with recurrent spectral breathing and energy oscillation; the two orthogonally polarized components possess synchronous pulsating manners due to the cross-phase modulation induced trapping mechanism and the similar formation process. Additionally, chaotic pulsation is also captured in sense that the spectra cannot recover to their original profiles despite of the harmonic energy oscillation. All these findings can enhance our understanding towards soliton pulsation with the freedom of vectorial degree.

A Bragg labeled wavelength (BLW) employed to the sensitivity calibration in an interference pattern has been proposed and experimentally demonstrated. According to the critical condition of Fabry-Perot (FP) interference and the antiresonant (AR) effect, the length of hollow core fiber (HCF) is artificially controlled to form a FP microcavity by collapsed fusion splicing. Dual-spectral features of the BLW and inline multimode interference (IMMI) dominate the transmission spectrum of the collapsed Bragg HCF (BHCF). The location of the BLW remains unchanged once the air-core diameter is selected. Sensing performance is investigated to validate the calibration function of the proposed BHCF. In particular, the temperature sensitivity of the BLW and multimode interference are 12.8 pm/°C and 87.1 pm/°C, respectively, corresponding to the reference sensitivity induced by the Bragg structure and the measurement sensitivity of the IMMI. All these findings highlight the calibration of HCF-based interferometric sensors in practical applications.

Recent progress in designing optimized microstructured optical fiber spreads an application scenario of optical fiber sensing. Here, we investigate the bending measurement based on a specially designed hollow core photonic crystal fiber (HC-PCF). Numerical simulation indicates that the bending sensitivity is mainly determined by the diameter of the hollow core and also depends on the coupled modes. Experimentally, a direction-independent bending sensor is fabricated by sandwiching a segment of specially designed HC-PCF into two segments of single mode fibers. The bending sensitivity of our device is improved 10 times by increasing the diameter of the hollow core. Bending measurement is validated at two orthogonal planes. The maximum sensitivity up to 2.8 nm/deg is obtained at 14° bending angle. Additionally, a low thermal sensitivity of 2.5 pm/°C is observed from 18°C to 1000°C. The sensor is robust, easy to fabricate and cost effective, which is promising in the field of small-angle bending measurement under a large temperature range.

Recent progress in time-stretch spectroscopy accelerates the exploration of ultrafast dynamics in mode-locked lasers through mapping the spectral information into time domain. Here, we report on real-time access to the coexistence of soliton singlets and molecules in an all-fiber laser mode-locked by a 45° tilted fiber grating. By virtue of the dispersive Fourier transform process, spectral information of the pulse trains under multi-pulse states can be resolved. It is identified that soliton singlets and soliton molecules coexist in one cavity roundtrip with different assembling forms. In addition, consecutive recordings of the shot-to-shot spectra further enable insight into the transient dynamics of soliton molecules. Particularly, varieties of internal motions, including the diverging/oscillating phase evolution and the temporal separation vibration, are validated loosely bound intra-soliton molecules. All of these findings unveil the scenarios of multi-soliton phenomena in fiber lasers, as well as highlight the significance of pulse interaction towards both scientific research and practical applications.

Extensive efforts have been devoted to construct a fiber-shaped energy-storage device to fulfill the increasing demand for power consumption of textile-based wearable electronics. Despite the myriad of available material selections and device architectures, it is still fundamentally challenging to develop eco-friendly fiber-shaped aqueous rechargeable batteries (FARBs) on a single-fiber architecture with high energy density and long-term stability. Here, we demonstrate flexible and high-voltage coaxial-fiber aqueous rechargeable zinc-ion batteries (CARZIBs). By utilizing a novel spherical zinc hexacyanoferrate with prominent electrochemical performance as cathode material, the assembled CARZIB offers a large capacity of 100.2 mAh cm -3 and a high energy density of 195.39 mWh cm -3 , outperforming the state-of-the-art FARBs. Moreover, the resulting CARZIB delivers outstanding flexibility with the capacity retention of 93.2% after bending 3000 times. Last, high operating voltage and output current are achieved by the serial and parallel connection of CARZIBs woven into the flexible textile to power high-energy-consuming devices. Thus, this work provides proof-of-concept design for next-generation wearable energy-storage devices.

In this paper, a bicharacteristic waveguide (BW) is proposed for fundamental-mode phase-matched second harmonic generation (SHG) from mid-infrared (MIR) to near-infrared (NIR). The required phase matching condition (PMC) is satisfied between the fundamental plasmonic mode at 3100 nm and the photonic mode at 1550 nm. With 1 W pump power, the SHG conversion efficiency of 4.173% can be obtained in 90.3 μm length waveguide. Moreover, the SHG conversion can be enhanced by using a microring resonator (MRR). By optimizing the MRR, the SHG conversion efficiency is increased to 8.30%. The proposed waveguide can also provide a promising platform for upconversion detection. By using an on-chip cascaded configuration, a gas sensor with the capability of MIR absorption and NIR detection is proposed. It is found that the detection limit (DL) can reach 1.04 nmol/L with 100 mW pump power, which shows significant enhancement compared with direct MIR absorption and detection.

Fast detection and identification of chemicals are of utmost importance for field testing and real-time monitoring in many fields. Raman spectroscopy is the predominant technique in principle, but its wide application is limited on account of weak scattering efficiency. Surface Enhanced Raman Spectroscopy (SERS) technique provides a solution for signal enhancement, but may not good at fast detection due to cross contamination and bulky instruments. Hollow-core fiber-based Raman cell with long interaction length can achieve high detection sensitivity, but it also suffers from low flow rate, bulky high-pressure equipment and light coupling structure, which also restricts its application for fast detection. In order to solve those problems, we proposed a portable Raman cell, by using metal-lined hollow-core fibers (MLHCF) with large bandwidth, good field confinement, extremely large numerical aperture and arbitrary length. With our proposed fiber inserted light coupling and light reflecting method, a Raman cell of 3.1 cm in length provides nearly 50 times of signal enhancement compared with direct detection using bare fiber tip. Furthermore, the sample exchange rate could be as fast as 1 second even under normal pressure without any cross contamination. At last, we also demonstrated the underlying general mechanism of signal enhancement and summarized it as volumetric enhancement of Raman scattering (VERS). Both the experiment results and the theoretical analysis demonstrated that our device has the potential for fast online Raman detection, which also possesses high-sensitivity and high-accuracy.

Coding technique has long been investigated as a solution to improve the signal-to-noise ratio (SNR) without sacrificing spatial resolution in optical time domain reflectometry (OTDR) systems. The past researches have been focusing at the construction of new codes, the combination of coding and other techniques, and the application of coding technique to versatile distributed optical fiber sensing systems such as Raman OTDR and Brillouin optical time domain analyzer, where the results are fruitful. Here, we reveal that oversampling after photodetection opens up a new dimension for coded OTDR other than code length and code type. We demonstrate that the coding gain can be further improved by harnessing the oversampling. Furthermore, the photodetector's bandwidth-limited feature can also be used to select the optimal sampling rate in order to obtain additional SNR enhancement. We believe this principle could be applied to any practical correlation-coded OTDR-based distributed fiber sensing systems with sufficient SNR enhancement. Our findings can serve to update existing instruments based on correlation-coded OTDR in a straightforward manner and at a relatively low cost.

Ultrafast fiber lasers have been serving as an ideal playground for spreading the extensive industrial applications and exploring the optics nonlinear dynamics. Here, we report a bidirectional fiber laser scheme for validating the possibility of a multiplexed laser system, which is passively mode-locked by the nonlinear polarization rotation (NPR) technique. In particular, the proposed fiber laser consists of one main cavity and two counter-propagating branches with different dispersion distributions. Thus, different formation mechanisms are introduced into the lasing oscillator. Consequently, stable conventional solitons (CSs) and dissipative solitons (DSs) are respectively formed in the clockwise (CW) and counterclockwise (CCW) directions of the same lasing oscillator. Moreover, attributing to the strong birefringence filtering effect, the wavelength selection mechanism is induced. Through the proper management of intra-cavity birefringence, wideband wavelength tuning and switchable multi-wavelength operations are experimentally observed. The central wavelength of CS can be continuously tuned from 1560 nm to 1602 nm. Additionally, the evolution process of different multi-wavelength operations is also elucidated. Benefiting from this multiplexed laser scheme, bidirectional lasing oscillation, multi-state soliton emission, wavelength tuning and multi-wavelength operations are synchronously realized in a single laser cavity. To the best of our knowledge, it is the first time for such a multiplexed fiber laser has been reported. The results provide information for multifunctional ultrafast fiber laser system, which is potentially set for telecommunications, fiber sensing and optics signal processing, etc.

We propose and demonstrate an on-chip 2×2 polarization-transparent switch for simultaneously handling two-group polarization-division multiplexing (PDM) signals. By introducing the polarization-transparent power splitter/combiner (PPS/PPC), waveguide crossings such as those in conventional PDM switches can be avoided and, thus, the insertion losses and complexity of the device can be reduced. Furthermore, each input polarization tributary can be independently switched and routed thanks to the output selectivity of the PPS/PPC. Thus, not only a basic switch between the dual-group PDM signals, but also a precise four-channel-signal regrouping can be achieved, enabling a complete and non-redundant switching functionality. A polarization extinction ratio larger than 15 dB with reasonable insertion losses is experimentally observed. Clear and open eye diagrams can be obtained with less than 1 dB power penalties for all the measured paths.

An ultra-wideband fiber optic acoustic sensor based on graphene diaphragm with a thickness of 10nm has been proposed and experimentally demonstrated. The two reflectors of the extrinsic Fabry-Perot interferometer is consist of fiber endface and graphene diaphragm, and the cavity is like a horn-shape. The radius of the effective area of the ultrathin graphene diaphragm is 1mm. Attributed to the strong van der Waals force between the diaphragm and the ceramic ferrule, the sensor head can be applied not only in the air but also underwater. Experimental results illustrate that ultra-wideband frequency response is from 5Hz to 0.8MHz, covering the range from infrasound to ultrasound. The noise-limited minimum detectable pressure level of 0.77Pa/Hz 1/2 @5Hz and 33.97μPa/Hz 1/2 @10kHz can be achieved, and the applied sound pressure is 114dB and 65.8dB, respectively. The fiber optic acoustic sensor may have a great potential in seismic wave monitoring, photoacoustic spectroscopy and photoacoustic imaging application due to its compact structure, simple manufacturing, and low cost.

In this paper, a high resolution and large dynamic range fiber optic temperature sensor without measurement crosstalk has been proposed. Two combinational mechanisms of anti-resonant reflecting optical waveguide and inline Mach-Zehnder interference structure are integrated in single hole twin eccentric cores fiber. The dual-effect composite spectrum is consist of several dominant resonant wavelengths and comb pattern, which are corresponding to the two above-mentioned mechanisms. Gauss fit and fast Fourier transform filtering are used for extracting the resonant wavelengths and comb spectrum, respectively. Accordingly, the temperature sensitivity of 42.18pm/°C and 2.057nm/°C are achieved by tracking the coherent decrease point. The lower sensitivity can guarantee a large dynamic range, while the higher one will contribute to the enhanced resolution. Therefore, the temperature monitoring is the combination of large dynamic range and enhanced resolution. Moreover, the size of the ultracompact sensor is only 950μm, which has a great potential for engineering applications.

We propose and demonstrate a compact and efficient grating coupler for first-order mode fiber-to-chip coupling. The coupler is configured by a double-part grating structure combined with a curved Y-junction by means of mode diversity. Compared with a traditional grating coupler, the designed structure takes advantage of minimizing the taper lengths of gratings, while performing higher coupling efficiency and lower crosstalk. At a mere 20 μm taper length, we measured a peak coupling efficiency of -3.68  dB with a 1 dB bandwidth of 35 nm. The coupling performance for the fundamental mode is also investigated. A reduced crosstalk below -15  dB within the whole band with reasonable coupling efficiency can be experimentally observed.

We propose and experimentally demonstrate a directional torsion sensor based on a Mach-Zehnder interferometer formed in a multicore fiber (MCF) with a ~570-μm-long helical structure (HS). The HS was fabricated into the MCF by simply pre-twisting and then heating with a CO 2 laser splicing system. This device shows the capability of directional torsion measurement from -17.094 rad/m to 15.669 rad/m with the sensitivity of ~0.118 nm/(rad/m). Moreover, since the multiple interferences respond differently to torsion and temperature simultaneously, the temperature cross-sensitivity of the proposed sensor can be eliminated effectively. Besides, the sensor owns other merits such as easy fabrication and good mechanical robustness.

We propose and demonstrate a silicon-based spot size converter (SSC), composed of two identical tapered channel waveguides and a Y-junction. The SSC is designed for first-order mode fiber-to-chip coupling on the basis of mode petal separation and the recombination method. Compared with a traditional on-chip SSC, this method is superior with reduced coupling loss when dealing with a higher-order mode. To the best of our knowledge, we present the first experimental observations of a higher-order SSC which is fully compatible with a standard fabrication process. Average coupling losses of 3 and 5.5 dB are predicted by simulation and demonstrated experimentally. A fully covered 3 dB bandwidth over a 1515-1585 nm wavelength range is experimentally observed.

In this paper, we report a sensitivity-controllable refractive index (RI) sensor based on a reflective θ-shaped microfiber resonator cooperated with Vernier effect. The θ-shaped microfiber resonator is a reflective all-fiber device with comb spectrum under weak coupling condition. By cascading it with a fiber Fabry-Perot interferometer, Vernier effect is generated to demodulate surrounding RI with enhanced sensitivity. Theoretical analysis reveals that RI sensitivity of the combined structure with Vernier effect is m times higher than the sensitivity of singular θ-shaped microfiber resonator. Moreover, by adjusting cavity length of the θ-shaped microfiber resonator, magnification factor M = (m + 1) can be tuned which enables the RI sensitivity to be controlled. Experimental result demonstrates that the RI sensitivity can be widely tuned from 311.77 nm/RIU (Reflective index unit) to 2460.07 nm/RIU when the cavity length of the θ-shaped microfiber resonator is adjusted from 9.4 mm to 8.7 mm. The θ-shaped microfiber resonator based all-fiber RI sensor featuring controllable sensitivity and compact size can be widely used for chemical and biological detections. The proposed scheme of generating Vernier effect also offers a universal idea to increase measurement sensitivity for optical fiber sensing structures with comb spectrum.

Featuring a dependence of Brillouin frequency shift (BFS) on temperature and strain changes over a wide range, Brillouin distributed optical fiber sensors are however essentially subjected to the relatively poor temperature/strain measurement resolution. On the other hand, phase-sensitive optical time-domain reflectometry (Φ-OTDR) offers ultrahigh temperature/strain measurement resolution, but the available frequency scanning range is normally narrow thereby severely restricts its measurement dynamic range. In order to achieve large dynamic range and high measurement resolution simultaneously, we propose to employ both the Brillouin optical time domain analysis (BOTDA) and Φ-OTDR through space-division multiplexed (SDM) configuration based on the multicore fiber (MCF), in which the two sensors are spatially separately implemented in the central core and a side core, respectively. As a proof of concept, the temperature sensing has been performed for validation with 2.5 m spatial resolution over 1.565 km MCF. Large temperature range (10 °C) has been measured by BOTDA and the 0.1 °C small temperature variation is successfully identified by Φ-OTDR with ~0.001 °C resolution. Moreover, the temperature changing process has been recorded by continuously performing the measurement of Φ-OTDR with 80 s frequency scanning period, showing about 0.02 °C temperature spacing at the monitored profile. The proposed system enables the capability to see finer and/or farther upon requirement in distributed optical fiber sensing.

High precision surface processing has an unmet demand for picosecond pulses with arbitrary temporal profiles in radial polarization states and at high average powers. Here, simultaneous spatial and arbitrary temporal shaping of chirped 10 - 100 picoseconds pulses is demonstrated with an Yb-doped fiber laser system generating an output power of more than 10 W at 40 MHz repetition frequency. The closed-loop control algorithm carves the pulses using a commercial, rugged, and fiberized optical pulse shaper placed at the front end of the system and uses feedback from the output pulse shapes for optimization. Arbitrary complex temporal profiles were demonstrated using a dispersive Fourier transform based technique and limits set by the system were investigated. Pulse shaping in the spatial domain was accomplished using an S-waveplate, fabricated in-house, to change the linearly polarized fundamental mode into a doughnut mode with radial polarization. This was amplified in a final-stage few-mode large-mode area fiber amplifier. Placing both temporal and spatial shaping elements before the power-amplifier avoids complex and potentially lossy conversion of the spatial mode profile at the output and provides an efficient route for power-scaling. The use of properly oriented quarter- and half-wave plates, which have both low loss and high power handling capability, enabled the output to be set to pure radial or azimuthal polarization states. Using commercial off-the-shelf components, our technique is able to immediately enhance the versatility of ultrashort fiber laser systems for high precision material processing and other industrial applications.

A novel Brillouin optical time-domain analysis (BOTDA) system without frequency sweep operation is proposed using intensity-modulated direct detection optical orthogonal frequency division multiplexing (IM-DD-OOFDM) probe signal. The influence of peak to average power ratio (PAPR) of OFDM probe signal on the recovery of Brillouin gain spectrum (BGS) is analyzed in theory and experiment. The complex BGS is reconstructed by channel estimation algorithm and Brillouin frequency shift (BFS) is located by curve fitting of intensity spectrum. The IM-DD-OOFDM BOTDA is demonstrated experimentally with 25 m spatial resolution over 10 km standard single mode fibers within much less measurement time.

The few-mode fiber (FMF) based Brillouin sensing operated in quasi-single mode (QSM) has been reported to achieve the distributed curvature measurement by monitoring the bend-induced strain variation. However, its practicality is limited by the inherent temperature-strain cross-sensitivity of Brillouin sensors. Here we proposed and experimentally demonstrated an approach for simultaneously distributed curvature and temperature sensing, which exploits a hybrid QSM operated Raman-Brillouin system in FMFs. Thanks to the larger spot size of the fundamental mode in the FMF, the Brillouin frequency shift change of the FMF is used for curvature estimation while the temperature variation is alleviated through Raman signals with the enhanced signal-to-noise ratio (SNR). Within 2 minutes measuring time, a 1.5 m spatial resolution is achieved along a 2 km FMF. The worst resolution of the square of fiber curvature is 0.333 cm -2 while the temperature resolution is 1.301 °C at the end of fiber.

Towards 100G beyond large-capacity optical access networks, wavelength division multiplexing (WDM) techniques incorporating with space division multiplexing (SDM) and affordable spectrally efficient advanced modulation formats are indispensable. In this paper, we proposed and experimentally demonstrated a cost-efficient multicore fiber (MCF) based hybrid WDM-SDM optical access network with self-homodyne coherent detection (SHCD) based downstream (DS) and direct detection optical filter bank multi carrier (DDO-FBMC) based upstream (US). In the DS experiments, the inner core of the 7-core fiber is used as a dedicated channel to deliver the local oscillator (LO) lights while the other 6 outer cores are used to transmit 4 channels of wavelength multiplexed 200-Gb/s PDM-16QAM-OFDM signals. For US transmission, 4 wavelengths with channel spacing of 100 GHz are intensity modulated with 30 Gb/s 32-QAM-FBMC and directly detected by a ~7 GHz bandwidth receiver after transmission along one of the outer core. The results show that a 4 × 6 × 200-Gb/s DS transmission can be realized over 37 km 7-core fiber without carrier frequency offset (CFO) and phase noise (PN) compensation even using 10 MHz linewidth DFB lasers. The SHCD based on MCF provides a compromise and cost efficient scheme between conventional intradyne coherent detection and intensity modulation and direct detection (IM/DD) schemes. Both US and DS have acceptable BER performance and high spectral efficiency.

We proposed and experimentally demonstrated a few mode fiber (FMF) based Raman distributed temperature sensor (RDTS) to extend the sensing distance with enhanced signal-to-noise ratio (SNR) of backscattered anti-Stokes spontaneous Raman scattering. Operating in the quasi-single mode (QSM) with efficient fundamental mode excitement, the FMF allows much larger input pump power before the onset of stimulated Raman scattering compared with the standard single mode fiber (SSMF) and mitigates the detrimental differential mode group delay (DMGD) existing in the conventional multimode fiber (MMF) based RDTS system. Comprehensive theoretical analysis has been conducted to reveal the benefits of RDTS brought by QSM operated FMFs with the consideration of geometric/optical parameters of different FMFs. The measurement uncertainty of FMF based scheme has also been evaluated. Among fibers being investigated and compared (SSMF, 2-mode and 4-mode FMFs, respectively), although an ideal 4-mode FMF based RDTS has the largest SNR enhancement in principle, real fabrication imperfections and larger splicing loss degrade its performance. While the 2-mode FMF based system outperforms in longer distance measurement, which agrees well with the theoretical calculations considering real experimental parameters. Using the conventional RDTS hardware, a 30-ns single pulse at 1550nm has been injected as the pump; the obtained temperature resolutions at 20km distance are estimated to be about 10°C, 7°C and 6°C for the SSMF, 4-mode and 2-mode FMFs, respectively. About 4°C improvement over SSMF on temperature resolution at the fiber end with 3m spatial resolution within 80s measuring time over 20km 2-mode FMFs have been achieved.

An in-line optofluidic refractive index (RI) sensing platform is constructed by splicing a side-channel photonic crystal fiber (SC-PCF) with side-polished single mode fibers. A long-period grating (LPG) combined with an intermodal interference between LP 01 and LP 11 core modes is used for sensing the RI of the liquid in the side channel. The resonant dip shows a nonlinear wavelength shift with increasing RI over the measured range from 1.3330 to 1.3961. The RI response of this sensing platform for a low RI range of 1.3330-1.3780 is approximately linear, and exhibits a sensitivity of 1145 nm/RIU. Besides, the detection limit of our sensing scheme is improved by around one order of magnitude by introducing the intermodal interference.

Spatial-division multiplexed (SDM) hybrid Raman- and Brillouin- optical time-domain reflectometry (RODTR and BODTR) utilizing the multi-core fiber has been proposed and experimentally demonstrated. The solution is proposed in order to overcome the incompatible input pump power required for hybrid ROTDR and BOTDR in single mode fiber (SMF), while ensuring the capability of discriminative measurement between temperature and strain. What's more, the central core has been intentionally chosen to implement BOTDR so as to avoid bending-induced cross-sensitivity on Brillouin frequency shift (BFS) measurement. The proposed system utilizes a single laser source, shared pump generation devices, but separate interrogation fiber channels, thus enabling efficient input power management for the two reflectometry, allowing for simultaneous measurement of spontaneous Raman scattering and Brillouin scattering. The worst temperature and strain resolutions are estimated to be about 2.2 °C and 40 με respectively in 6 km sensing range with 3 m spatial resolution.

A compact high temperature sensor utilizing a multipath Michelson interferometer (MI) structure based on weak coupling multicore fiber (MCF) is proposed and experimentally demonstrated. The device is fabricated by program-controlled tapering the spliced region between single mode fiber (SMF) and a segment of MCF. After that, a spherical reflective structure is formed by arc-fusion splicing the end face of MCF. Theoretical analysis has been implemented for this specific multipath MI structure; beam propagation method based simulation and corresponding experiments were performed to investigate the effect of taper and spherical end face on system's performance. Benefiting from the multipath interferences and heterogeneous structure between the center core and surrounding cores of the all-solid MCF, an enhanced temperature sensitivity of 165 pm/°C up to 900°C and a high-quality interference spectrum with 25 dB fringe visibility were achieved.

In this paper, the feasibility of space division multiplexing for optical wireless fronthaul systems is experimentally demonstrated by implementing high speed MIMO-OFDM/OQAM radio signals over 20km 7-core fiber and 0.4m wireless link. Moreover, the impact of optical inter-core crosstalk in multicore fibers on the proposed MIMO-OFDM/OQAM radio over fiber system is experimentally evaluated in both SISO and MIMO configurations for comparison. The experimental results show that the inter-core crosstalk tolerance of the proposed radio over fiber system can be relaxed to -10 dB by using the proposed MIMO-OFDM/OQAM processing. These results could guide high density multicore fiber design to support a large number of antenna modules and a higher density of radio-access points for potential applications in 5G cellular system.

In this paper, we investigate and experimentally demonstrate the influences of distance between the silica core and the glycerin core of a selectively glycerin-infiltrated photonic crystal fiber (PCF) on the mode characteristics, as well as the temperature sensitivity. By comparing the simulation and experiment results of three single-void glycerin-infiltrated PCFs with the glycerin core being one period, two periods and three periods away from the silica core respectively, it reveals that the smaller distance between the silica core and the glycerin core does not affect the modes indices, but increases the intensities of modes in the glycerin core and thus enhances the temperature sensitivity. Consequently, the temperature sensitivity can be controlled and tuned by appropriately designing the structure parameters of glycerin-infiltrated PCF. Besides, the highest temperature sensitivity up to -3.06nm/°C is obtained in the experiment as the glycerin core is nearest to the silica core. This work provides insights into the design and optimization of the liquid-infiltrated PCF for sensing applications.

We report on a compact sensor by integrating a Mach-Zehnder interference and a cladding Bragg grating in a same section of all-solid photonic bandgap fiber. Theoretical investigation reveals that the Bragg grating resonance stems from the coupling of counter-propagating cladding LP01-like supermodes and the Mach-Zehnder interference works between a LP01-like supermode and LP01 core mode. Compared with the interference fringe, such supermode grating dip responses to axial strain in a more sensitive and opposite-direction manner. Whereas, the interference fringe shows a higher temperature sensitivity than the supermode grating dip. By means of these different responses, this device finds a useful application in the discrimination of temperature and axial strain.

A miniature all-fiber temperature sensor is demonstrated by using a Michelson interferometer formed with a short length of Germania-core, silica-cladding optical fiber (Ge-fiber) fusion-spliced to a conventional single-mode fiber (SMF). Thanks to the large differential refractive index of the Ge-fiber sensing element, a reasonably small free spectral range (FSR) of 18.6 nm is achieved even with an as short as 0.9 mm Ge-fiber that may help us increase the measurement accuracy especially in point sensing applications and, at the same time, keep large measurement temperature range without overlapping reading problem. Experimental results show that high sensitivity of 89.0 pm/°C is achieved and the highest measurement temperature is up to 500°C.

High spectral efficiency modulation format based unrepeatered transmission systems using distributed Raman amplifier (DRA) have attracted much attention recently. To enhance the reach and optimize system performance, careful design of DRA is required based on the analysis of various types of impairments and their balance. In this paper, we study various pump RIN induced distortions on high spectral efficiency modulation formats. The vector theory of both 1st and higher-order stimulated Raman scattering (SRS) effect using Jones-matrix formalism is presented. The pump RIN will induce three types of distortion on high spectral efficiency signals: intensity noise stemming from SRS, phase noise stemming from cross phase modulation (XPM), and polarization crosstalk stemming from cross polarization modulation (XPolM). An analytical model for the statistical property of relative phase noise (RPN) in higher order DRA without dealing with complex vector theory is derived. The impact of pump RIN induced impairments are analyzed in polarization-multiplexed (PM)-QPSK and PM-16QAM-based unrepeatered systems simulations using 1st, 2nd and 3rd-order forward pumped Raman amplifier. It is shown that at realistic RIN levels, negligible impairments will be induced to PM-QPSK signals in 1st and 2nd order DRA, while non-negligible impairments will occur in 3rd order case. PM-16QAM signals suffer more penalties compared to PM-QPSK with the same on-off gain where both 2nd and 3rd order DRA will cause non-negligible performance degradations. We also investigate the performance of digital signal processing (DSP) algorithms to mitigate such impairments.

Towards the next generation optical access network supporting large capacity data transmission to enormous number of users covering a wider area, we proposed a hybrid wavelength-space division multiplexing (WSDM) optical access network architecture utilizing multicore fibers with advanced modulation formats. As a proof of concept, we experimentally demonstrated a WSDM optical access network with duplex transmission using our developed and fabricated multicore (7-core) fibers with 58.7km distance. As a cost-effective modulation scheme for access network, the optical OFDM-QPSK signal has been intensity modulated on the downstream transmission in the optical line terminal (OLT) and it was directly detected in the optical network unit (ONU) after MCF transmission. 10 wavelengths with 25GHz channel spacing from an optical comb generator are employed and each wavelength is loaded with 5Gb/s OFDM-QPSK signal. After amplification, power splitting, and fan-in multiplexer, 10-wavelength downstream signal was injected into six outer layer cores simultaneously and the aggregation downstream capacity reaches 300 Gb/s. -16 dBm sensitivity has been achieved for 3.8 × 10 -3 bit error ratio (BER) with 7% Forward Error Correction (FEC) limit for all wavelengths in every core. Upstream signal from ONU side has also been generated and the bidirectional transmission in the same core causes negligible performance degradation to the downstream signal. As a universal platform for wired/wireless data access, our proposed architecture provides additional dimension for high speed mobile signal transmission and we hence demonstrated an upstream delivery of 20Gb/s per wavelength with QPSK modulation formats using the inner core of MCF emulating a mobile backhaul service. The IQ modulated data was coherently detected in the OLT side. -19 dBm sensitivity has been achieved under the FEC limit and more than 18 dB power budget is guaranteed.

We propose and experimentally demonstrate a refractive index (RI) sensor based on cascaded microfiber knot resonators (CMKRs) with Vernier effect. Deriving from high proportional evanescent field of microfiber and spectrum magnification function of Vernier effect, the RI sensor shows high sensitivity as well as high detection resolution. By using the method named "Drawing-Knotting-Assembling (DKA)", a compact CMKRs is fabricated for experimental demonstration. With the assistance of Lorentz fitting algorithm on the transmission spectrum, sensitivity of 6523nm/RIU and detection resolution up to 1.533 × 10(-7)RIU are obtained in the experiment which show good agreement with the numerical simulation. The proposed all-fiber RI sensor with high sensitivity, compact size and low cost can be widely used for chemical and biological detection, as well as the electronic/magnetic field measurement.

We propose and demonstrate a tunable and switchable dual-wavelength ultra-fast Tm-doped fiber laser. The tunability is based on nonlinear polarization evolution (NPE) technique in a passively mode-locked laser cavity. The NPE effect induces wavelength-dependent loss in the cavity to effectively alleviate mode competition and enables the multiwavelength mode locking. The laser exhibits tunable dual-wavelength mode locking over a wide range from 1852 to 1886 nm. The system has compact structure and both the wavelength tuning and switching capabilities can be realized by controlling the polarization in the fiber ring cavity.

An ultrasensitive surface enhanced Raman spectroscopy (SERS) based sensing platform was developed to detect the mean sialic acid level on the surface of single cell with sensitivity as low as 2 fmol. This platform adopted the use of an interference-free Raman tag, 4-(dihydroxyborophenyl) acetylene (DBA), which selectively binds to sialic acid on the cell membrane. By loading the side channel of a photonic crystal fiber with a mixture of gold nanoparticles and DBA-tagged HeLa cell, and subsequently propagating laser light through the central solid core, strong SERS signal was obtained. This SERS technique achieved accurate detection and quantification of concentration of sialic acid on a single cell, surpassing previously reported methods that required more than 10(5) cells. Moreover, this platform can be developed into a clinical diagnostic tool to potentially analyze sialic acid-related diseases such as tumor malignancy and metastasis in real-time., (Copyright © 2014 Elsevier B.V. All rights reserved.)

We investigate the timing phase noise of fiber lasers mode locked by graphene oxide (GO) and carbon nanotubes (CNTs), respectively, integrated in a linear cavity fiber laser in the reflecting operation. Due to the shorter decay time of the GO and CNTs, weaker slow saturable absorber effects are expected and mode-locked lasers based on these two saturable absorbers exhibit low excess timing phase noise coupled from the laser intensity noise. Compared with a reference laser mode locked by semiconductor saturable absorber mirror (SESAM), GO based laser obtains a timing phase noise reduction of 7 dB at 1 kHz and a timing jitter reduction of 45% experimentally whereas CNTs based laser obtains a timing phase noise reduction of 3 dB and a timing jitter reduction of 29%. This finding suggests that saturable absorbers with short decay time have the potential for achieving mode locking operation with low timing phase noise, which is important for applications including frequency metrology, high-precision optical sampling, clock distribution and optical sensing.

An all-fiber multiwavelength Tm-doped laser assisted by four-wave mixing (FWM) in highly Germania-doped highly nonlinear fiber (HG-HNLF) has been experimentally demonstrated. Benefiting from the high nonlinearity of the HG-HNLF, intensity-dependent gain caused by FWM is introduced into the laser cavity to mitigate the gain competition in Tm-doped fiber. Thanks to a 50-m HG-HNLF, 9, 22, and 36 lasing lines with considering 10-dB, 20-dB, and 30-dB bandwidth, respectively is obtained at room temperature with wavelength spacing of 0.86 nm. More than 30-nm broad-band lasing can be obtained. The stability of the proposed fiber laser has also been studied. Repeat measurements show the power fluctuations and wavelength drifts of the lasing lines are less than 1.6 dB and 0.05 nm, respectively. The laser performances without the assistance of HG-HNLF have fewer center wavelengths lasing, which indicates that FWM in HG-HNLF plays an important role for the multiwavelength laser operation.

We provide a comprehensive study on the efficient third harmonic generation (THG) in a lossy metal-hybrid-metal asymmetric plasmonic slot waveguide (MHM) to develop a method for efficient THG by focusing on the modal phase-matching condition (PMC), the third-order nonlinear susceptibility of the nonlinear interactive material, and the pump-harmonic modal overlap in conjunction with reasonable linear propagation loss. In addition to the PMC and the nonlinear material, the stimulated THG process can be greatly enhanced by the large pump-harmonic modal overlap. With 1 W pump power, simulation results present that THG conversion efficiency up to 2.79 × 10(-4) within 4.5 ����m MHM can be achieved.

We propose and demonstrate a novel and simple dual-parameter measurement scheme based on a cascaded optical fiber device of long-period grating (LPG) and photonic crystal fiber (PCF) modal interferometer. The temperature and refractive index (RI) can be measured simultaneously by monitoring the spectral characteristics of the device. The implemented sensor shows distinctive spectral sensitivities of -30.82  nm/RIU (refractive index unit) and 47.4  pm/°C by the LPG, and 171.96  nm/RIU and 10.4  pm/°C by the PCF modal interferometer. The simultaneous measurement of the temperature and external RI is experimentally demonstrated by the sensor. The temperature shift and RI shift calculated by the sensor matrix agree well with the actual temperature and RI change in the experiment.

We demonstrated an all-fiber mode-locked laser system which generated high-energy wave-breaking-free pulses with low repetition rate. The system included a passively mode-locked fiber laser which acted as a master oscillator and an Yb-doped fiber amplifier. By increasing the cavity length of the laser, pulse energy could be significantly increased. According to different cavity length, wave-breaking-free pulse with 2.9 nJ-6.9 nJ pulse energy and 870 kHz-187 kHz repetition rate has been achieved from the master oscillator. Over 4 microJ pulse can be obtained after amplification.