Search

In the North China Plain, groundwater tables have been dropping at unsustainable rates of 1 m per year due to irrigation of a double cropping system of winter wheat and summer maize. To reverse the trend, we examined whether alternative crop rotations could save water. Moisture contents were measured weekly at 20 cm intervals in the top 180 cm of soil as part of a 12-year field experiment with four crop rotations: sweet potato→ cotton→ sweet potato→ winter wheat-summer maize (SpCSpWS, 4-year cycle); peanuts → winter wheat-summer maize (PWS, 2-year cycle); ryegrass-cotton→ peanuts→ winter wheat-summer maize (RCPWS, 3-year cycle); and winter wheat-summer maize (WS, each year). We found that, compared to WS, the SpCSpWS annual evapotranspiration was 28% lower, PWS was 19% lower and RCPWS was 14% lower. The yield per unit of water evaporated improved for wheat within any alternative rotation compared to WS, increasing up to 19%. Average soil moisture contents at the sowing date of wheat in the SpCSpWS, PWS, and RCPWS rotations were 7, 4, and 10% higher than WS, respectively. The advantage of alternative rotations was that a deep rooted crop of winter wheat reaching down to 180 cm followed shallow rooted crops (sweet potato and peanut drawing soil moisture from 0 to 120 cm). They benefited from the sequencing and vertical complementarity of soil moisture extraction. Thus, replacing the traditional crop rotation with cropping system that involves rotating with annual shallow rooted crops is promising for reducing groundwater depletion in the North China Plain.

Denitrifying bioreactors have been suggested as effective best management practices to reduce nitrate and nitrite (NO) in large-scale agricultural tile drainage. This study combines experiments in flow-through laboratory reactors with in situ continuous monitoring and experiments in a pair of field reactors to determine the effectiveness of reactors for small-scale agriculture in New York. It also compares the use of a typical woodchip media with a woodchip and biochar mixture. Laboratory results showed linear increase in NO removal with both increased inflow concentration and increased residence time. Average removal of NO in weekly monitoring of field reactors over the course of two growing seasons was 3.23 and 4.00 g N m d for woodchip and woodchip/biochar reactors, respectively. Removal of NO during two field experimental runs was similar to in situ monitoring and did not correlate with laboratory experiments. Factors that are uncontrollable at the field scale, such as temperature and inflow water chemistry, may result in more complex and resilient microbial communities that are less specialized for denitrification. Further study of other controlling variables, other field sites, and other parameters, including microbial communities and trace gas emissions, will help elucidate function and applicability of denitrifying bioreactors., (Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.)

Spectral confocal microscope visualizations of microsphere movement in unsaturated porous media showed that attachment at the Air Water Solid (AWS) interface was an important retention mechanism. These visualizations can aid in resolving the functional form of retention rates of colloids at the AWS interface. In this study, soil adsorption isotherm equations were adapted by replacing the chemical concentration in the water as independent variable by the cumulative colloids passing by. In order of increasing number of fitted parameters, the functions tested were the Langmuir adsorption isotherm, the Logistic distribution, and the Weibull distribution. The functions were fitted against colloid concentrations obtained from time series of images acquired with a spectral confocal microscope for three experiments performed where either plain or carboxylated polystyrene latex microspheres were pulsed in a small flow chamber filled with cleaned quartz sand. Both moving and retained colloids were quantified over time. In fitting the models to the data, the agreement improved with increasing number of model parameters. The Weibull distribution gave overall the best fit. The logistic distribution did not fit the initial retention of microspheres well but otherwise the fit was good. The Langmuir isotherm only fitted the longest time series well. The results can be explained that initially when colloids are first introduced the rate of retention is low. Once colloids are at the AWS interface they act as anchor point for other colloids to attach and thereby increasing the retention rate as clusters form. Once the available attachment sites diminish, the retention rate decreases.

Describing the distribution of aquatic habitats and the health of biological communities can be costly and time-consuming; therefore, simple, inexpensive methods to scale observations of aquatic biota to watersheds that lack data would be useful. In this study, we explored the potential of a simple "hydrogeomorphic" model to predict the effects of acid deposition on macroinvertebrate, fish, and diatom communities in 28 sub-watersheds of the 176-km2 Neversink River basin in the Catskill Mountains of New York State. The empirical model was originally developed to predict stream-water acid neutralizing capacity (ANC) using the watershed slope and drainage density. Because ANC is known to be strongly related to aquatic biological communities in the Neversink, we speculated that the model might correlate well with biotic indicators of ANC response. The hydrogeomorphic model was strongly correlated to several measures of macroinvertebrate and fish community richness and density, but less strongly correlated to diatom acid tolerance. The model was also strongly correlated to biological communities in 18 sub-watersheds independent of the model development, with the linear correlation capturing the strongly acidic nature of small upland watersheds (< 1 km2). Overall, we demonstrated the applicability of geospatial data sets and a simple hydrogeomorphic model for estimating aquatic biological communities in areas with stream-water acidification, allowing estimates where no direct field observations are available. Similar modeling approaches have the potential to complement or refine expensive and time-consuming measurements of aquatic biota populations and to aid in regional assessments of aquatic health.

This study demonstrates that the pattern assembly and attachment strength of colloids in an evaporating sessile droplet resting on a smooth substrate can be controlled by adding nonionic solutes (surfactant) to the solution. As expected, increasing the surfactant concentration leads to a decrease in initial surface tension of the drop, σ(0). For the range of initial surface tensions investigated (39-72 mN m(-1)), three distinct deposition patterns were produced: amorphous stains (σ(0) = 63-72 mN m(-1)), coffee-ring stains (σ(0) = 48-53 mN m(-1)), and concentric rings (σ(0) = 39-45 mN m(-1)). A flow-displacement system was used to measure the attachment strength of the dried colloids. Characteristic drying regimes associated with the three unique pattern formations are attributed to abrupt transitions of contact line dynamics during evaporation. The first transition from slipping- to pinned-contact line was found to be a direct result of the competition between mechanical instability of the droplet and the friction generated by pinned colloids at the contact line. The second transition from pinned- to recurrent-stick-rip-slip-contact line was caused by repeated liquid film rupturing from evaporation-intensified surfactant concentration. Data from flow-displacement tests indicate that attachment strength of dried particles is strongest for amorphous stains (lowest surfactant concentration) and weakest for concentric rings (highest surfactant concentration). The mechanism behind these observations was ascribed to the formation and adsorption of micelles onto colloid and substrate surfaces as the droplet solution evaporates. The range of attachment forces observed between the colloids and the solid substrate were well captured by extended-DLVO interactions accounting for van der Waals attraction, electric double layer repulsion, and micelle-protrusion repulsion. Both empirical and theoretical results suggest that an increasingly dense layer of adsorbed micellar-protrusions on colloid and substrate surfaces acts as a physical barrier that hinders strong van der Waals attractive interactions at close proximity. Thereby, colloid stains dried at higher surfactant concentrations are more easily detached from the substrate when dislodging forces are applied than stains dried at lower surfactant concentrations.