Search

Alveolar ridge resorption following tooth extraction often renders a lateral bone augmentation inevitable. Some patients, however, suffer from severe early (during graft healing, EPatients who underwent a guided bone regeneration (GBR) were screened for inclusion according to the following criteria: (1) a relatively symmetrical maxillary arch, (2) an intact contra-lateral alveolar bone dimension, (3) the presence of a pre-operative cone-beam CT (CBCT), (4) a CBCT taken immediately after GBR, and (5) at least one CBCT scan ≥6 months after surgery. CBCT scans from different timepoints were registered and imported into Mimics software (Materialise, Leuven, Belgium). Bone dimensions of the contra-lateral site of the augmentation, representing the "individual phenotypical dimension of the alveolar crest" (IPD) were super-imposed on the augmented site and registered accordingly. As such, EA total of 17 patients (23 augmented sites) were included. After EWithin the limitations of this study the results indicate that the dimensions of a lateral bone augmentation are defined by the "individual phenotypic bone boundaries" of the patient. This article is protected by copyright. All rights reserved.

To report on zygomatic implant (ZI) survival rate and associated complications through a longitudinal retrospective cohort assessment.A total of 940 ZIs (rough: 781, machined: 159; immediate loading: 454, delayed loading: 486) and 451 standard implants (rough: 195, machined: 256; immediate loading: 58, delayed loading: 393) were placed in 302 adult patients with atrophic maxilla from December 1998 till September 2020. Following data collection reported complications were grouped based on their origin as infectious/ non-infectious biological and mechanical. Statistical analysis was performed to identify risk factors and preceding complications leading to implant loss (p0.05).The survival rate of ZI was found to be 89.9% and the average time between implant placement and an eventual loss was 4.8 years. The mean ZI follow-up period was 7.9±4.9 years. Amongst the infectious biological complications, sinusitis was the most reported (n=138) occurring at a mean follow-up time-point of 4.5 years, whereas infraorbital nerve hypoesthesia occurred more frequently in the non-infectious biological category (n=8, meantime: 0.3 years). The prosthetic screw fracture was the most reported complication of mechanical origin (n=29, meantime: 4 years). Furthermore, sinusitis, standard implant loss, zygomatic/peri-zygomatic region infection, and oroantral communication were significantly associated with ZI loss.ZI placement offered a high survival rate for the rehabilitation of severely atrophied maxilla with most losses occurring within the first five years at follow-up. The most frequently observed complication was sinusitis which tends to develop several years following implant placement.

The aim of this review was to investigate the application of artificial intelligence (AI) in maxillofacial computer-assisted surgical planning (CASP) workflows with the discussion of limitations and possible future directions.An in-depth search of the literature was undertaken to review articles concerned with the application of AI for segmentation, multimodal image registration, virtual surgical planning (VSP), and three-dimensional (3D) printing steps of the maxillofacial CASP workflows.The existing AI models were trained to address individual steps of CASP, and no single intelligent workflow was found encompassing all steps of the planning process. Segmentation of dentomaxillofacial tissue from computed tomography (CT)/cone-beam CT imaging was the most commonly explored area which could be applicable in a clinical setting. Nevertheless, a lack of generalizability was the main issue, as the majority of models were trained with the data derived from a single device and imaging protocol which might not offer similar performance when considering other devices. In relation to registration, VSP and 3D printing, the presence of inadequate heterogeneous data limits the automatization of these tasks.The synergy between AI and CASP workflows has the potential to improve the planning precision and efficacy. However, there is a need for future studies with big data before the emergent technology finds application in a real clinical setting.The implementation of AI models in maxillofacial CASP workflows could minimize a surgeon's workload and increase efficiency and consistency of the planning process, meanwhile enhancing the patient-specific predictability.

This study aimed at performing a systematic review of the literature on the application of artificial intelligence (AI) in dental and maxillofacial cone beam computed tomography (CBCT) and providing comprehensive descriptions of current technical innovations to assist future researchers and dental professionals. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses Protocols (PRISMA) Statement was followed. The study's protocol was prospectively registered. Following databases were searched, based on MeSH and Emtree terms: PubMed/MEDLINE, Embase and Web of Science. The search strategy enrolled 1473 articles. 59 publications were included, which assessed the use of AI on CBCT images in dentistry. According to the PROBAST guidelines for study design, seven papers reported only external validation and 11 reported both model building and validation on an external dataset. 40 studies focused exclusively on model development. The AI models employed mainly used deep learning models (42 studies), while other 17 papers used conventional approaches, such as statistical-shape and active shape models, and traditional machine learning methods, such as thresholding-based methods, support vector machines, k-nearest neighbors, decision trees, and random forests. Supervised or semi-supervised learning was utilized in the majority (96.62%) of studies, and unsupervised learning was used in two (3.38%). 52 publications included studies had a high risk of bias (ROB), two papers had a low ROB, and four papers had an unclear rating. Applications based on AI have the potential to improve oral healthcare quality, promote personalized, predictive, preventative, and participatory dentistry, and expedite dental procedures.

To assess, in vitro, variables potentially influencing implant blooming using a human-like imaging phantom and 3D-printed mandibles.Sixty implants were inserted in 3D-printed mandibles in 26 different configurations in order to examine the impact of implant diameter, presence of a cover screw, implant design/material, implant position, and the presence of additional implants on implant blooming using two cone-beam computed tomography (CBCT) devices (Accuitomo [ACC] and NewTom [NWT]). Two observers measured the amount of implant blooming in both buccolingual and mesiodistal directions. Inter-rater agreement and descriptive statistics, grouped by implant characteristic and CBCT device, were calculated.Both CBCT devices increased implant diameter (a mean increase of 9.2% and 11.8% for titanium, 20.3% and 24.4% for zirconium, for ACC and NWT, respectively). An increase in implant diameter did not increase the amount of blooming, whereas placing a cover screw did (from 8.0% to 10.9% for ACC, and from 10.0% to 15.6% for NWT). Moreover, implant design, anatomical region, and the presence of another implant also affected the extent of the blooming.Dental implants show a clear diameter increase on CBCT, with the effect being more pronounced for zirconium than for titanium implants. Similar effects are likely to occur in the clinical setting, potentially masking nonosseointegration, reducing the dimensions of peri-implant defects, and/or causing underestimation of the buccal bone thickness.

This systematic review was performed to assess the potential influence of orthognathic surgery on root resorption (RR).An electronic search was conducted using PubMed, Web of Science, Cochrane Central and Embase for articles published up to April 2022. Following inclusion and exclusion criteria, a total of six articles were selected that reported on RR following orthognathic surgery. Risk of bias assessment was performed according to the ROBINS-1 and ROB-2 tools.The design of five studies was retrospective and one randomized clinical trial was included, with a follow-up period ranging between six months and ten years. The assessment methodologies mostly relied on two-dimensional imaging modalities where only one study used cone-beam computed tomography (CBCT) for objective quantification via linear measurements. The percentage of teeth affected by RR varied between approximately 1 and 36%, where surgically assisted rapid maxillary expansion (SARME) and Le Fort I osteotomy showed the highest percentage of RR followed by bilateral sagittal split osteotomy.The present data tend to indicate that specific orthognathic procedures such as SARME and Le Fort I osteotomy may induce or reinforce RR. Yet, considering lack of evidence related to objective quantification of RR following orthodontic and/or orthognathic treatment, further CBCT-based prospective studies are required for an improved understanding of RR following different surgical procedures.

Objective To qualitatively and quantitatively assess integrated segmentation of three convolutional neural network (CNN) models for the creation of a maxillary virtual patient (MVP) from cone-beam computed tomography (CBCT) images. Materials and methods A dataset of 40 CBCT scans acquired with different scanning parameters was selected. Three previously validated individual CNN models were integrated to achieve a combined segmentation of maxillary complex, maxillary sinuses, and upper dentition. Two experts performed a qualitative assessment, scoring-integrated segmentations from 0 to 10 based on the number of required refinements. Furthermore, experts executed refinements, allowing performance comparison between integrated automated segmentation (AS) and refined segmentation (RS) models. Inter-observer consistency of the refinements and the time needed to create a full-resolution automatic segmentation were calculated. Results From the dataset, 85% scored 7–10, and 15% were within 3–6. The average time required for automated segmentation was 1.7 min. Performance metrics indicated an excellent overlap between automatic and refined segmentation with a dice similarity coefficient (DSC) of 99.3%. High inter-observer consistency of refinements was observed, with a 95% Hausdorff distance (HD) of 0.045 mm. Conclusion The integrated CNN models proved to be fast, accurate, and consistent along with a strong interobserver consistency in creating the MVP. Clinical relevance The automated segmentation of these structures simultaneously could act as a valuable tool in clinical orthodontics, implant rehabilitation, and any oral or maxillofacial surgical procedures, where visualization of MVP and its relationship with surrounding structures is a necessity for reaching an accurate diagnosis and patient-specific treatment planning.

Objectives: To prospectively follow up a previously reported sample, analyzing (1) changes in third molar (M3) position after completion of 2 different types of orthodontic treatment: (2) non-extraction treatment with (HG) vs without cervical headgear (non-HG) and (3) first or second premolar extractions (PM1-2) compared to a non-extraction group (NE). Methods: A total of 474 patients were prospectively followed up. Panoramic radiographs were taken pre- (T1), post-treatment (T2) and at follow-up (T3). T3 records (a mean of three years after treatment) were available for 135 (HG vs non-HG) and 134 patients (PM1-2 vs NE), respectively. Angulation, vertical position, relation with the mandibular canal and mineralization status of M3 at T2 and T3 were statistically compared. Results: The HG group presented more M3 with ideal vertical orientation at T3. In NE-cases, further improvement in angulation and orientation can be expected after debonding, as well as a deterioration in the relationship with the mandibular canal. Extractions accelerated upper M3 vertical eruption and PM2 extractions led to long-term larger lower retromolar spaces. Conclusions: The use of cervical headgear increased upper M3 uprighting three years after debonding, while little changes in M3 position were found after orthodontic treatment with extractions. However, PM2 extractions led to larger retromolar spaces and better M3 angulation in the long term.

Objectives: To compare the performance of the Malmgren index on 2D and 3D radiographs. Methods: Patients with a panoramic radiograph and a cone beam computed tomography (CBCT) taken at an interval of

Study Design: Retrospective study. Objective: Zygomaticomaxillary complex (ZMC) fractures are common facial injuries with heterogeneity regarding aetiologies, fracture types, infraorbital nerve (ION) involvement, and treatment methods. The aim of this study was to identify associations between aetiologies, fracture types, and neurological complications. Additionally, treatment methods and recovery time were investigated. Methods: Medical files of 272 patients with unilateral and bilateral ZMC fractures were reviewed, whose cases were managed from January 2014 to January 2019 at the Department of Oral and Maxillofacial Surgery, University hospitals Leuven, Belgium. History of ION sensory dysfunction and facial nerve motoric dysfunction were noted during follow-up. Results: ION hypoaesthesia incidence was 37.3%, with the main causes being fall accidents, road traffic accidents, and interpersonal violence. Significant predictors of ION hypoaesthesia were Zingg type B fractures ( P = 0.003), fracture line course through the infraorbital canal ( P < .001), orbital floor fracture ( P < 0.001), and ZMC dislocation or mobility ( P = 0.001). Conclusion: Of all ZMC fractures, 37.3% exhibited ION hypoaesthesia. Only ZMC Zingg type B fractures (74.0%) were significantly more associated with ION hypoaesthesia. ION hypoesthesia was more likely (OR = 2.707) when the fracture line course ran through the infraorbital canal, and was less dependent on the degree of displacement. Neuropathic pain symptoms developed after ZMC fractures in 2.2% patients, posing a treatment challenge. Neuropathic pain symptoms were slightly more common among women, and were associated only with type B or C fractures. No other parameters were found to predict the outcome of this post-traumatic neuropathic pain condition.

The present aim was to estimate direct health care costs of patients suffering from post-traumatic trigeminal neuropathy (PTTN) and to compare the use of health care services, medications, and costs between temporary and persistent (>3 months) PTTN cohorts. A pre-existing clinical dataset of PTTN patients visiting a tertiary orofacial pain clinic in Belgium was utilized, including symptoms and quality of life measurements. Cost and resource utilization data were obtained by Belgium's largest health insurance provider for a period of 5 years after onset. Data from 158 patients was analyzed. The average cost per patient in the first year after injury was €2353 (IQR 1426-4499) with an out-of-pocket expense of 25% of the total cost. Hospitalization and technical interventions were the main drivers of cumulative costs, followed by consultation costs. For each cost category, expenditure was significantly higher in patients with persistent PTTN than in those with temporary PTTN (median 5-year total costs in persistent PTTN patients yielded €8866 (IQR 4368-18191) versus €4432 (IQR 2156-9032) in temporary PTTN, p

The objective of this review was to assess the accuracy of available means of determining the BBT (buccal bone thickness) and/or BBL (buccal bone level). This was translated into the following research question: What is the accuracy of the available means of visualizing the BBP (buccal bone plate) to establish the BBT and/or the BBL, when compared to control measurements? As control measurements histomorphometric measurements, direct measurements and cone-beam computed tomography (CBCT) measurements in the absence of metal are accepted.METHODS: The literary search was performed by searching the databases of MEDLINE, Embase, and Web of Science, up to July 13, 2021. Types of studies included were clinical, in vitro and animal trials, specifically looking into the bone level and/or bone thickness of the buccal bone plate at oral implants. Reference lists were hand searched for relevant articles. Two reviewers performed the data extraction and analysis. Only studies using reliable control measurements to evaluate the accuracy of the tested means of visualizing BBT and/or BBL were included for analysis. The QUADAS-2 tool was used to perform bias analysis on the relevant studies. Extracted data was tabulated to show the differences between test and control measurements for BBT and BBL. For in vitro studies on CBCT measurements of BBT meta-analysis could be performed.A total of 1176 papers were identified in the search. Twenty-two articles were used for data extraction and qualitative analysis. Of these studies nine were animal studies, 9 were in vitro studies and four were human studies. Six animal studies and three human studies provided data on probing. CBCT and sonography as techniques for visualizing the buccal bone plate. Probing at implant sites seems to provide data that correlates with a consistent distance from the BBP. Meta-analysis for probing studies could not be performed due to heterogeneity in the setups of these studies. Eleven studies on CBCT were eligible for inclusion. Of these three were animal studies, the remaining 8 studies were all in vitro studies. Meta-analysis was performed on the accuracy of CBCT for in vitro studies, finding a significant underestimation of the BBT when compared to control measurements by a mean difference of -0.15 mm with 95%CI [-0.26,-0.03]. Three studies were identified on measurement of BBT and/or BBL by sonography. This included one human study and two in vitro studies. The identified studies show a low error when determining the buccal bone level or thickness using sonography. All included studies possess a high risk of bias according to risk of bias analysis, mostly due to selection of the patient.A strong limitation of this systematic review is the inclusion of different studies with heterogeneous designs. Within the limits of this analysis it cannot be concluded that probing is an accurate way of visualizing the BBP. CBCT cannot yet be recommended as a standard diagnostic tool for follow-up of the BBP at oral implants. The application of sonography as a diagnostic tool to visualize the BBP needs further scientific validation.

A 6-year-old girl presented with a grossly expansive lesion of the left lower jaw. Radiological investigations revealed a large mixed radiolucent/radio-opaque lesion of the left mandible extending into the ramus. Correlation of biopsy and imaging results lead to the diagnosis of an expansile form of focal cemento-osseous dysplasia. Surgical enucleation was performed, and the patient remained free of recurrence after 6 months of follow-up. When dealing with fibro-osseous lesions of the jaw, correlation of radiological and pathological results is mandatory to make a correct diagnosis and avoid unnecessarily extensive surgery.

Objectives We aim to validate 3D CRANI, a novel high-field STIR TSE, MR neurography sequence in the visualisation of the extraforaminal cranial and occipital nerve branches on a 3-T system. Furthermore, we wish to evaluate the role of gadolinium administration and calculate nerve benchmark values for future reference. Methods Eleven consecutive patients underwent MR imaging including the 3D CRANI sequence before and immediately after intravenous gadolinium administration. Two observers rated suppression quality and nerve visualisation using Likert scales before and after contrast administration. Extraforaminal cranial and occipital nerves were assessed. Nerve calibers and signal intensities were measured at predefined anatomical landmarks, and apparent signal intensity ratios were calculated. Results The assessed segments of the cranial and occipital nerves could be identified in most cases. The overall intrarater agreement was 79.2% and interrater agreement was 82.7% (intrarater κ = .561, p < .0001; interrater κ = .642, p < .0001). After contrast administration, this significantly improved to an intrarater agreement of 92.7% and interrater agreement of 93.6% (intrarater κ = .688, p < .0001; interrater κ = .727, p < .0001). Contrast administration improved suppression quality and significant changes in nerve caliber and signal intensity measurements. Nerve diameter and signal intensity benchmarking values were obtained. Conclusion 3D CRANI is reliable for the visualization of the extraforaminal cranial and occipital nerves. Intravenous gadolinium significantly improves MR neurography when applying this sequence. Benchmarking data are published to allow future assessment of the 3D CRANI sequence in patients with pathology of the extraforaminal cranial and occipital nerves. Key Points • MR neurography using the 3D CRANI sequence is a reliable method to evaluate the extraforaminal cranial and occipital nerves. • Gadolinium contrast administration significantly improves suppression quality and nerve visualisation. • Benchmarking values including apparent signal intensity ratios and nerve calibers depend on contrast administration and might play an important role in future studies evaluating extraforaminal cranial and occipital neuropathies.

Trismus is one of the most debilitating and treatment-resistant complications resulting from head and neck oncological treatments. The objective of this study was to assess how primary tumour variables could assist in predicting chronic trismus. From a (retrospective) oncological database (Department of Oral and Maxillofacial Surgery, University Hospitals Leuven), tumour-related, surgical, and oral functional variables were reviewed. Contributing factors for chronic trismus, defined as a mouth opening of less than 35 mm, at least one year after treatment for oral squamous cell cancer, were assessed via logistic regression. A mediational analysis was conducted on the significant predictive variables. Thirteen out of 52 patients were observed to have chronic trismus. A significantly higher prevalence of trismus was found for increasing clinical T classification (p0.01), tumours based in the maxilla or the retromolar trigone (p = 0.04), after adjuvant radiotherapy (p = 0.04), and/or with masticatory muscle tumour invasion (p ≤ 0.02). Furthermore, radiotherapy significantly impacted T classification in chronic trismus, while T classification was significantly related to masticatory muscle invasion. Although radiotherapy and clinical T classification are well-established risk factors for postoperative trismus, masticatory muscle invasion should be considered as one of the main predictive factors.

The aim of this systematic review was to provide evidence related to the association between non-antiresorptive medications and MRONJ.The following three electronic databases were screened: PubMed, EMBASE, and Web of Science from December 2020 until April 2021. Two reviewers independently performed the study selection, data extraction, and quality assessment of the included studies. The Newcastle-Ottawa Scale (NOS) was used for assessing the risk of bias. A meta-analysis was performed for assessing the relationship between MRONJ and non-antiresorptive medications.The search strategy retrieved 996 articles. Following removal of duplicates, title, and abstract screening and full-text reading, 58 publications were eligible to be included in the review. A total of 867 cases of MRONJ were included (33% female, 55% male, 12% no gender reported). The mean age of the patients when MRONJ was diagnosed was 61 years (range 19-100 years) and the average time of diagnosis was 10 months following non-antiresorptive drug therapy. Patients with a history of corticosteroids (0.61, 95% CI 0.39, 0.82, p = 0.001) and chemotherapy (0.59, 95% CI 0.51, 0.67, p = 0.001) showed the highest significant effect size (ED) compared to the control group for MRONJ occurrence.A significant association existed between MRONJ and non-antiresorptive drugs. However, considering limited evidence, findings should be interpreted with caution.The non-antiresorptive drugs might allow the dentist to apply the principle of "drug holiday" following concurrence from the drug prescribing clinician.CRD42020173891.

Background Arthroscopy is a minimally invasive diagnostic tool and treatment strategy in patients suffering from temporomandibular disorders (TMD) when conservative treatment fails. This study aimed to find specific variables on pre-operative MRI or during arthroscopy that could predict success of arthroscopic lysis and lavage. Methods This retrospective analysis compared pre-operative maximum interincisal opening (MIO), pain and main complaint (pain, limited MIO or joint sounds) with results at short-term and medium-term follow-up (ST and MT respectively). Different variables scored on MRI or arthroscopy were used to make a stepwise regression model, subsequently a combined analysis was conducted using variables from both MRI and arthroscopy. Results A total of 47 patients (50 joints) met the inclusion criteria. The main complaint improved by 62 and 53% at ST and MT respectively. The absolute or probable absence of a crumpled disc scored on MRI predicted success at ST and MT (p = 0.0112 and p = 0.0054), and remained significant at MT in the combined analysis (p = 0.0078). Arthroscopic findings of degenerative joint disease predicted success at ST (p = 0.0178), absolute or probable absence of discal reduction scored during arthroscopy significantly predicted success in the combined analysis at ST (p = 0.0474). Conclusion To improve selection criteria for patients undergoing an arthroscopic lysis and lavage of the TMJ, future research might focus on variables visualized on MRI. Although more research is needed, disc shape and in particular the absolute or probable absence of a crumpled disc might be used as predictive variable for success.

The aim of this study was to perform a three-dimensional evaluation of the skeletal relapse of the proximal and distal mandibular segments following isolated bilateral sagittal split osteotomy advancement surgery. One hundred consecutive patients (mean age 25.8±11.7 years), comprising 65 female patients (mean age 26.4±12.1 years) and 35 male patients (mean age 24.6±11.0 years) requiring mandibular advancement without genioplasty, were enrolled prospectively in the study. Cone beam computed tomography scans were acquired for each patient at three time-points: preoperatively, immediately (1-6 weeks) after surgery, and 1 year after surgery. A validated tool was utilized to assess the surgical movement and relapse. Based on percentage, the majority of the distal and proximal translational and rotational movements relapsed within the range of ≤2mm and ≤2°. The distal segment revealed a significant relapse in a posterior, inferior, and clockwise pitch direction. Both left and right proximal segments showed a significant translational relapse in the medial, posterior, and superior direction. Amongst the rotational parameters, proximal segments relapsed significantly in clockwise pitch, clockwise roll, and counterclockwise yaw direction. Overall, both distal and proximal bone segments showed a clinically acceptable translational and rotational stability. The proximal segments torqued towards their original position with a reduction of flaring. ispartof: INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY vol:51 issue:1 pages:113-121 ispartof: location:Denmark status: published

To three-dimensionally assess and visualize the eruption path and development of the maxillary canine following alveolar bone grafting in patients born with cleft lip and palate. A further objective of this analysis was to assess how the presence of the lateral incisor impacts the eruption path of the canine. Observational follow-up study. Stockholm Craniofacial Team, Karolinska University Hospital, Sweden. Thirty children born with non-syndromic unilateral cleft lip with or without palate were consecutively included. CBCT scans of the maxilla were taken six months before and six months after the alveolar bone-grafting surgery for each patient. Canine eruption (angulation and vertical movement) and canine development (length and volume). There was a significant difference pre- and post-operatively of the canine angulation between the cleft and non-cleft sides. The mean angulation on the cleft side was 14.7° (SD = 11.1°) while on the non-cleft side, it was 4.9° (SD = 9.2°). No significant differences were noted between cleft-side and non-cleft side canines in terms of amount of vertical eruption and volumetric development. Absence of the lateral incisor did not significantly contribute to either canine angulation or its vertical eruption on the cleft-side. Higher angulation of the canine on the cleft side indicates a higher risk of future canine impaction. Presence or absence of the lateral incisor did not significantly affect canine angulation or its vertical eruption. Increased age and children born with total cleft lip and palate imply a higher risk of angulated canines on the cleft side.

Objective: To present patient dose levels for different CBCT scanners, acquired by a dose monitoring tool in a University Hospital, as a function of field of view (FOV), operation mode, and patient age. Methods: An integrated dose monitoring tool was used to collect radiation exposure data [type of CBCT unit, dose-area product (DAP), FOV size, and operation mode] and patient demographic information (age, referral department) performed on a 3D Accuitomo 170 and a Newtom VGI EVO unit. Effective dose conversion factors were calculated and implemented into the dose monitoring system. For each CBCT unit, the frequency of examinations, clinical indications, and effective dose levels were obtained for different age and FOV groups, and operation modes. Results: A total of 5163 CBCT examinations were analyzed. Surgical planning and follow-up were the most frequent clinical indications. For the standard operation mode, effective doses ranged from 35.1 to 300 µSv and 9.26-117 µSv using 3D Accuitomo 170 and Newtom VGI EVO, respectively. In general, effective doses decreased with increasing age and FOV size reduction. Conclusions: Effective dose levels varied notably between systems and operation modes.Operation mode selection and FOV size were indication-oriented, with larger FOV sizes election serving surgical planning and follow-up. Seeing the influence of FOV size on effective dose levels, manufacturers could be advised to move toward patient-specific collimation and dynamic FOV selection. Systematically monitoring patient doses could be recommended for steering future CBCT optimization.

Objectives: As-low-as-diagnostically-acceptable (ALADA) doses are substantially lower than current diagnostic reference levels. To improve dose management, a reference quality approach was tested in which phantom quality metrics of a clinical ALADA dose reference protocol were used to benchmark potential ALADA dose protocols for various scanner models. Methods: Spatial resolution, contrast resolution, contrast-to-noise ratio (CNR) and subjective noise and sharpness were evaluated for a clinical ALADA dose reference protocol at 80 kV and 40 mA (CTDIvol 2.66 mGy) and compared with test protocols of two CT scanners at 100 kV and 35 mA (3.08–3.44 mGy), 80 kV and 54–61 mA (2.65 mGy), 80 kV and 40 mA (1.73–1.92 mGy), and 80 kV and 21–23 mA (1.00–1.03 mGy) using different kernels, filtered backprojection and iterative reconstructions. The test protocols with the lowest dose showing quality metrics non-inferior to the reference protocol were verified in a cadaver study by determining the diagnostic accuracy of detection of maxillofacial fractures and CNR of the optical nerve and rectus inferior muscle. Results: 36 different image series were analysed in the phantom study. Based on the phantom quality metrics, potential ALADA dose protocols at 1.73–1.92 mGy were selected. Compared with the reference images, the selected protocols showed non-inferiority in the detection and classification of maxillofacial fractures and non-inferior CNR of orbital soft tissues in the cadaver study. Conclusions: Reference quality metrics from clinical ALADA dose protocols may be used to guide selection of potential ALADA dose protocols of different CT scanners.

OBJECTIVE: To identify local radiographic risk factors for Medication-Related Osteonecrosis of the Jaws (MRONJ) in osteoporotic patients treated with antiresorptive drugs (ARD) and undergoing tooth extraction. MATERIAL AND METHODS: Patients were included in this retrospective, longitudinal, case-control study, if having at least one administration of ARD, underwent tooth extraction(s), and had pre- and post-operative panoramic radiographs. Additionally, a matched control group was selected. Three calibrated, blinded, and independent observers assessed each tooth extraction site. Statistical analysis compared control against study group, and within the latter, sites MRONJ+ and MRONJ-. RESULTS: In total, 120 patients (99 females/21 males) with 354 tooth extractions were included, from which nine patients (7.5%) and eleven tooth extraction sites (3.1%) developed MRONJ. When comparing control with study group, the latter showed significantly more thickened lamina dura, persistence of the alveolar socket, heterogeneous bone patterns, and sequestrum formation. In the study group, MRONJ developed significantly more in males (19%, p = 0.049), smokers (25%, p = 0.008), in the mandible (82%, p = 0.027), when identifying a radiolucent or sclerotic trabecular pattern (p = 0.004) or when extracting teeth with furcation involvement (p

OBJECTIVE: The objectives of this study were to assess observers' preference for standard screens (SSs) or medical displays (MDs) in visualizing difficult-to-diagnose radiographic dental abnormalities and their preference for dental filter tools when utilized with MD systems. STUDY DESIGN: A retrospective data set of 60 in vivo radiographs consisting of intraoral (n = 20), panoramic (n = 20), and cone beam computed tomography (n = 20) images was created. Three image display monitors, including an SS, an MD, and an MD with 3 dental filter configurations (bone-low density enhancement filter, tooth-high density enhancement filter, and a combined filter representing regular MD), were utilized to assess 4 observers' monitor preferences in detecting radiographically subtle dental abnormalities. The data were analyzed by using binomial distribution. A P value ≤.05 was considered statistically significant. RESULTS: Although observers expressed preference for MD for visualizing some abnormalities when examining intraoral and panoramic radiographs, MD was not preferred for detection of any abnormalities with cone beam computed tomography. There were no significant differences in preference for SS or MD overall (P ≥ .2024). Observers expressed significant preference for the filters in visualizing all but 2 abnormalities (P ≤ .0252). CONCLUSIONS: The use of MD monitors enabled with dental filter tools may be preferred for visualizing certain subtle abnormalities. ispartof: ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY vol:132 issue:4 pages:475-482 ispartof: location:United States status: published

OBJECTIVE: This systematic review aims to investigate the effect of virtual planning on the treatment of zygomaticomaxillary complex (ZMC) traumatology followed by intraoperative navigation. Furthermore, clinical outcomes following intraoperative navigation surgery or conventional surgery will be compared. MATERIALS AND METHODS: A systematic literature search was conducted in PubMed, Embase, Web-of-Science, and Cochrane on January 1st, 2022. Inclusion criteria were articles using preoperative three-dimensional (3D) virtual planning combined with intraoperative navigation or comparing these 3D methods with conventional methods. Furthermore, at least one of the following outcomes needed to be included in the article: technical accuracy of the procedure, preoperative planning time, operative time, number of fixation points, patient satisfaction, complications, or total costs of the intervention. RESULTS: Following the screening of 4478 articles, 17 were included. Five articles appeared to indicate a significantly better technical linear accuracy, one article reported better accuracy for rotation and two articles showed better accuracy in restoring orbital volume when using navigation. Nine articles investigated operative time with varying results. Seven articles calculated the additional costs, of which three concluded no extra cost while the others indicated high additional costs or questionable cost-effectiveness. CONCLUSION: Virtual planning and intraoperative navigation technologies have the potential to assist maxillofacial trauma surgeons in reducing ZMC fractures significantly more accurately and restoring the facial contour in a less invasive manner at an acceptable cost. REGISTRATION: The protocol for this systematic review (CRD42020216717) was registered in the International Prospective Register of Systematic Reviews (PROSPERO). ispartof: JOURNAL OF STOMATOLOGY ORAL AND MAXILLOFACIAL SURGERY vol:123 issue:6 pages:E841-E848 ispartof: location:France status: published

The aim of this study was to evaluate CBCT exposure protocols and CBCT devices for the detection of cracks and fine endodontic structures using 3 conditions of metallic artifacts. An anthropomorphic phantom containing teeth with cracks, isthmus, narrow canal, and apical delta was scanned using ten CBCT devices. A reference industrial CT image was used to detect and measure all structures. Three conditions were created: 1. metal-free, 2. ‘endo’ and 3.‘implant’ with metallic objects placed next to those teeth. For each condition, three protocols were selected: medium field of view (FOV) standard resolution, small FOV standard, and high resolution. As results, only small FOV high-resolution metal-free images from two devices (A and H) were appropriate to visualize cracks. For fine structure identification, the best result was observed for small FOV high resolution. However, the visualization significantly worsened in the presence of a metallic artefacts. The ability of CBCT images for visualizing cracks is restricted to certain CBCT devices. Once metallic artefacts are present, crack detection becomes unlikely. Overall, small FOV high-resolution protocols may allow identification of fine endodontic structures as long as there are no high-dense objects in the region of interest.

The purpose of this study was to describe the complications following orthognathic surgery in patients with rheumatic diseases and to evaluate rheumatic disease as a possible risk factor.A retrospective cohort study was conducted during a 6-year period. The sample consisted of rheumatic and healthy patients who underwent orthognathic surgery. The outcome variables included infection, relapse, respiratory complications, hemorrhage, neurosensory disturbances, temporomandibular joint complications, and removal of osteosynthesis material. Bivariate analysis and logistic regression were applied to identify rheumatic disease as an independent risk factor for complications after orthognathic surgery.Twenty patients were identified as having rheumatic diseases (male: 2; female: 18; mean age: 37.8 ± 13.6 years), and 278 patients were systemically healthy (male: 105; female: 173; mean age: 25.8 ± 11.8 years). The most frequent complications in rheumatic and healthy patients were delayed recovery from neurosensory disturbance (55% and 33%), removal of osteosynthesis material (45% and 26%), and infection (35% and 7%). Following adjustment for possible confounders, rheumatic disease showed a significant association with infection (OR = 4.191, p = 0.016).Patients with rheumatic diseases are at a higher risk of postoperative infection following orthognathic surgery compared to healthy patients.