Search

This letter derives and computes the detection probability of timing synchronization in a wireless personal area network (WPAN) system encountered with a multipath Rayleigh fading channel. The timing synchronization scheme using CAZAC training symbols and correlation techniques is adopted. For measuring system performance, the sync detection probability derived in the considered system is evaluated in a multipath Rayleigh fading channel. [ABSTRACT FROM PUBLISHER]

A treatment process was developed when basic oxygen furnace slag (BOF slag) and hydrogen peroxide were used to oxidize 2,4-dinitrophenol from an aqueous solution. BOF slag, final waste slurry from steel making plants, contains about 12.5% by weight of ferrous oxide. In an acid solution, BOF slag can be dissociated to produce ferrous ions and react with hydrogen peroxide to produce hydroxyl radicals and oxidize2,4-dinitrophenol. The results of the research demonstrated that theprocess had a significant capacity for oxidation of 2,4-dinitrophenol from the aqueous phase. Various factors critical to the oxidation of 2,4-dinitrophenol were studied, including hydrogen peroxide concentration, concentration of BOF slag, initial concentration of 2,4-dinitrophenol, and pH value of solution. Experimental results proved that 100 mg/L 2,4-dinitrophenol and its oxidation intermediate could be totally decomposed within 60 min by 10 g/L BOF slag, 0.18 g/L hydrogen peroxide and pH 2.8 +/- 0.2. The optimum hydrogen peroxide concentration for degradation of 100 mg/L of 2,4-dinitrophenol is between 0.09 g/L and 0.18 g/L as 10 g/L BOF slag in the solution of pH 2.8 +/- 0.2. A hydrogen peroxide concentration higher than 0.18 g/L is disadvantageous to the oxidation process. The oxidation efficiency increased with the increase of BOF slag concentration at 0.18 g/L hydrogen peroxide dose. The best pH value of the solution is in the vicinity of 2.8. An oxidation reaction mechanism was proposed for predicting the concentration changes of 2,4-dinitrophenol, ferrous ion, and hydrogen peroxide. [ABSTRACT FROM AUTHOR]

Congenital infiltrating lipomatosis of the face (CILF) is a rare congenital disease of the head and neck region. In this study, the cases of 20 patients diagnosed with CILF were reviewed retrospectively to analyse the characteristics of the disease. The symptoms, signs, and clinical progression were investigated. Radiological changes were analysed according to the distribution of the trigeminal nerve. The pathological features of the fatty facial lesions, jaw hyperplasia, and lingual lesions were further identified. All 20 patients demonstrated hemifacial hypertrophy at birth. None had a family history of the disease. Significant radiological features of CILF (prevalence ≥90%) included thickened buccal subcutaneous fat, palatal submucosal fat, and temporal subcutaneous fat, maxillary tuberosity heteroplasia, and fatty infiltration of the masseteric intermuscular space. With regard to the trigeminal nerve, the frontal branch region (CNV1) was rarely affected, while the maxillary (CNV2) and mandibular (CNV3) branch regions showed considerable changes. Pathologically, CILF was observed to be characterized by the infiltration of mature adipose tissue into the adjacent buccal soft tissue, osteal remodelling surrounded by sheets of mature lipocytes and supporting fibrovascular stroma, and lingual hamartoma. In summary, CILF exhibits distinct characteristics that are related to the regions controlled by the maxillary and mandibular branches of the trigeminal nerve, suggesting that CILF may be associated with early neural development., (Copyright © 2024 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Precision measurements by the Alpha Magnetic Spectrometer (AMS) on the International Space Station of the deuteron (D) flux are presented. The measurements are based on 21×10^{6} D nuclei in the rigidity range from 1.9 to 21 GV collected from May 2011 to April 2021. We observe that over the entire rigidity range the D flux exhibits nearly identical time variations with the p, ^{3}He, and ^{4}He fluxes. Above 4.5 GV, the D/^{4}He flux ratio is time independent and its rigidity dependence is well described by a single power law ∝R^{Δ} with Δ_{D/^{4}He}=-0.108±0.005. This is in contrast with the ^{3}He/^{4}He flux ratio for which we find Δ_{^{3}He/^{4}He}=-0.289±0.003. Above ∼13  GV we find a nearly identical rigidity dependence of the D and p fluxes with a D/p flux ratio of 0.027±0.001. These unexpected observations indicate that cosmic deuterons have a sizable primarylike component. With a method independent of cosmic ray propagation, we obtain the primary component of the D flux equal to 9.4±0.5% of the ^{4}He flux and the secondary component of the D flux equal to 58±5% of the ^{3}He flux.

We present the precision measurements of 11 years of daily cosmic positron fluxes in the rigidity range from 1.00 to 41.9 GV based on 3.4×10^{6} positrons collected with the Alpha Magnetic Spectrometer (AMS) aboard the International Space Station. The positron fluxes show distinctly different time variations from the electron fluxes at short and long timescales. A hysteresis between the electron fluxes and the positron fluxes is observed with a significance greater than 5σ at rigidities below 8.5 GV. On the contrary, the positron fluxes and the proton fluxes show similar time variation. Remarkably, we found that positron fluxes are modulated more than proton fluxes with a significance greater than 5σ for rigidities below 7 GV. These continuous daily positron fluxes, together with AMS daily electron, proton, and helium fluxes over an 11-year solar cycle, provide unique input to the understanding of both the charge-sign and mass dependencies of cosmic rays in the heliosphere.

We report the properties of primary cosmic-ray sulfur (S) in the rigidity range 2.15 GV to 3.0 TV based on 0.38×10^{6} sulfur nuclei collected by the Alpha Magnetic Spectrometer experiment (AMS). We observed that above 90 GV the rigidity dependence of the S flux is identical to the rigidity dependence of Ne-Mg-Si fluxes, which is different from the rigidity dependence of the He-C-O-Fe fluxes. We found that, similar to N, Na, and Al cosmic rays, over the entire rigidity range, the traditional primary cosmic rays S, Ne, Mg, and C all have sizeable secondary components, and the S, Ne, and Mg fluxes are well described by the weighted sum of the primary silicon flux and the secondary fluorine flux, and the C flux is well described by the weighted sum of the primary oxygen flux and the secondary boron flux. The primary and secondary contributions of the traditional primary cosmic-ray fluxes of C, Ne, Mg, and S (even Z elements) are distinctly different from the primary and secondary contributions of the N, Na, and Al (odd Z elements) fluxes. The abundance ratio at the source for S/Si is 0.167±0.006, for Ne/Si is 0.833±0.025, for Mg/Si is 0.994±0.029, and for C/O is 0.836±0.025. These values are determined independent of cosmic-ray propagation.

Objective: To explore the clinical characteristics and outcomes of patients with non-Epstein-Barr virus (EBV) infection-associated hemophagocytic lymphohistiocytosis (IAHLH) . Methods: Clinical data of 48 patients diagnosed with non-EBV IAHLH in Beijing Friendship Hospital from January 2015 to March 2021 were collected, and the clinical characteristics, treatment, curative effect and prognosis of the patients were analyzed retrospectively. Results: This study included 48 patients, 28 males and 20 females, with a median (range) age of 34.5 (2-74) years. Pathogens that cause IAHLH were as follows: virus (16 cases, 33.3%) , bacteria (17 cases, 35.4%) , parasitic agents (13 cases, 27.1%) , and fungi (2 cases, 4.2%) . The median time from onset to diagnosis of hemophagocytic syndrome (HLH) was 40 (10-160) days. The median (range) time duration from prodrome to the definite diagnosis of IAHLH was 67 (23-270) days. The clinical characteristics were fever (48 cases, 100%) , splenomegaly (34 cases, 70.8%) , cytopenia (38 cases, 79.1%) , elevated ferritin (45 cases, 93.8%) , elevated fasting triglyceride levels (7 cases, 14.6%) , hypofibrinogenemia (17 cases, 35.4%) , decrease natural killer cell activity (26 in 44 cases, 59.1%) , and elevated sCD25 (35 cases, 74.5%) . Twenty-five patients (52.1%) had adenopathy. Once a certain pathogen was identified as the causative factor of hemophagocytic lymphohistiocytosis (HLH) , cytotoxic agents and glucocorticoids were withdrawn, and specific pathogen-directed treatment was initiated. After treatment, 36 cases (75.0%) achieved complete response, and 14 of 15 patients (93.3%) with parasitic and fungal HLH got a response; however, the response rate of patient with bacterial and viral HLH was only 66.7% (22 of 33 patients) . The estimated 5-year overall survival rate was 72.3% (95% CI 50.3%-69.8%) . The adverse prognostic factors were total bilirubin over the upper limit of normal ( OR =20.0, 95% CI 1.1-378.3, P =0.046) and pathogenic infection not fully controlled ( OR =19.9, 95% CI 2.9-134.5, P =0.002) . Conclusion: Non-EBV IAHLH has a good prognosis. When diagnosed, cytotoxic agents and glucocorticoids should be tapered off, and pathogen-targeted therapy should be critically administered to clear the triggering infection.

Objective: To analyse the clinical application of thoracodorsal artery perforator flaps (TDAPF) in the repair of head and neck defects. Methods: A retrospective review was conducted on 38 patients with oral and maxillofacial head and neck malignant tumors who underwent radical resection of oral and oropharyngeal carcinoma and TDAPF repair in the Department of Oral and Maxillofacial Head and Neck Oncology of the Ninth People's Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from June 2017 to November 2018. Among them, 32 were males and 6 were females, aged 30-74 years. Flap size, vessel pedicle length, diameter and number of perforators, and flap fat thickness were recorded and counted. Elasti Meter and Skin Fibro Meter were applied to measure the skin elasticity and hardness in the donor areas of 4 kinds of skin flaps before the flap preparation. SPSS 19.0 statistical software was used for statistical analysis of the data. Results: All the flaps survived (100%). The mean elasticity of TDAPF [(41.2±12.9) N/m] was significantly lower than that of anterolateral thigh [(77.6±23.3) N/m, χ²=88.89, P <0.05], anterolateral thigh [(62.6±17.7) N/m, χ²=59.99, P <0.05] and or forearm flap [(51.7±8.6) N/m, χ²=37.82, P <0.05]. The hardness of TDAPF [(0.037±0.016) N] was also significantly lower than that of anterolateral femoral [(0.088±0.019) N, F =93.27, P <0.05], anteromedial femoral [(0.059±0.020) N, F =25.71, P <0.05] or forearm flap [(0.062±0.016) N, F =29.11, P <0.05]. Follow-up period ranged from 2 to 14 months. The 38 patients treated with TDAPF had a good recovery of the functions in the recipient areas, and the scars of the donor areas were not obvious after surgery, without serious complications. Conclusion: TDAPF is suitable for reconstruction of head and neck defect, with ductile texture and good recovery of the morphology and function of head and neck.

Objective: To investigate the effects of hydrophilic treatment on the surface morphology and surface properties of pure titanium and titanium-zirconium alloy implants, and to provide reference for the studies of implant surface modification. Methods: The pure titanium group, the hydrophilic pure titanium group, the titanium zirconium alloy group and the hydrophilic titanium-zirconium alloy group were prepared by sandblasting and acid-etching or hydrophilic sandblasting and acid-etching, (11 specimens in each group). The surface morphology and surface properties of four types of titanium specimens were analyzed by surface contact angle meter, scanning electron microscope (SEM), optical profilometer, atomic force microscope (AFM) and Raman spectrometer. Results: The surface contact angles of hydrophilic pure titanium and hydrophilic titanium-zirconium alloy were 1.6°±0.3° and 1.5°±0.2°, and the surface contact angles of pure titanium and titanium-zirconium alloy were 101.4°±4.6° and 96.2°±3.0°, respectively. SEM showed that the nano-protrusions on the surface of pure titanium and titanium-zirconium alloys were less or even absent, while the nano-protrusions on the surface of hydrophilic pure titanium and hydrophilic titanium-zirconium alloys were relatively more; the nano-protrusions on the surface of hydrophilic pure titanium surface were small and dense relatively, but the nano-protrusions of the hydrophilic titanium-zirconium alloy had large diameters and were dispersed relatively. The optical profiler and AFM showed that the surface roughness of hydrophilic pure titanium and hydrophilic titanium-zirconium alloy was significantly higher than that of pure titanium and titanium-zirconium alloy ( P< 0.05). Raman spectroscopy showed that only the amorphous TiO(2) was present on the surface of the pure titanium group, while the rutile TiO(2) characteristic peak was observed in the other three groups, but the lateral inhomogeneity was observed. After Raman shift 610 cm(-1), the Raman spectra of four groups were similar. Conclusions: Hydrophilic sandblasting and acid-etching treatment can improve the surface hydrophilicity and surface roughness of pure titanium and titanium zirconium alloy, and improve the surface properties of pure titanium and titanium zirconium alloy implants.