Search

The metal contacts on 2D black phosphorus field-effect transistor and photodetectors are studied. The metal work functions can significantly impact the Schottky barrier at the metal-semiconductor contact in black phosphorus devices. Higher metal work functions lead to larger output hole currents in p-type transistors, while ambipolar characteristics can be observed with lower work function metals. Photodetectors with record high photoresponsivity (223 mA/W) are demonstrated on black phosphorus through contact-engineering., Comment: 4 Pages

Black phosphorus has been revisited recently as a new two-dimensional material showing potential applications in electronics and optoelectronics. Here we report the anisotropic in-plane thermal conductivity of suspended few-layer black phosphorus measured by micro-Raman spectroscopy. The armchair and zigzag thermal conductivities are ~20 and ~40 W m$^{-1}$ K$^{-1}$ for black phosphorus films thicker than 15 nm, respectively, and decrease to ~10 and ~20 W m$^{-1}$ K$^{-1}$ as the film thickness is reduced, exhibiting significant anisotropy. The thermal conductivity anisotropic ratio is found to be ~2 for thick black phosphorus films and drops to ~1.5 for the thinnest 9.5-nm-thick film. Theoretical modeling reveals that the observed anisotropy is primarily related to the anisotropic phonon dispersion, whereas the intrinsic phonon scattering rates are found to be similar along the armchair and zigzag directions. Surface scattering in the black phosphorus films is shown to strongly suppress the contribution of long-mean-free-path acoustic phonons., Comment: Accepted by Nature Communications

Phosphorus is one of the most abundant elements preserved in earth, constructing with a fraction of ~0.1% of the earth crust. In general, phosphorus has several allotropes. The two most commonly seen allotropes, white and red phosphorus, are widely used in explosives and safety matches. In addition, black phosphorus, though rarely mentioned, is a layered semiconductor and have great potentials in optical and electronic applications. Remarkably, this layered material can be reduced to one single atomic layer in the vertical direction owing to the van der Waals structure, known as phosphorene, where the physical properties can be tremendously different from its bulk counterpart. In this review article, we trace back to the 100 years research history on black phosphorus from the synthesis to material properties, and extend the topic from black phosphorus to phosphorene. The physical and transport properties are highlighted, aiming at further applications in electronic and optoelectronics devices., Comment: Invited review article published by Chemical Society Review (2014)

Layered two-dimensional (2D) semiconducting transition metal dichalcogenides (TMD) have been widely isolated, synthesized, and characterized recently. Numerous 2D materials are identified as the potential candidates as channel materials for future thin film technology due to their high mobility and the exhibiting bandgaps. While many TMD filed-effect transistors (FETs) have been widely demonstrated along with a significant progress to clearly understand the device physics, large contact resistance at metal/semiconductor interface still remain a challenge. From 2D device research point of view, how to minimize the Schottky barrier effects on contacts thus reduce the contact resistance of metals on 2D materials is very critical for the further development of the field. Here, we present a review of contact research on molybdenum disulfide and other TMD FETs from the fundamental understanding of metal-semiconductor interfaces on 2D materials. A clear contact research strategy on 2D semiconducting materials is developed for future high-performance 2D FETs with aggressively scaled dimensions., Comment: Published in APL Materials

Low-resistivity metal-semiconductor (M-S) contact is one of the urgent challenges in the research of 2D transition metal dichalcogenides (TMDs). Here, we report a chloride molecular doping technique which greatly reduces the contact resistance (Rc) in the few-layer WS2 and MoS2. After doping, the Rc of WS2 and MoS2 have been decreased to 0.7 kohm*um and 0.5 kohm*um, respectively. The significant reduction of the Rc is attributed to the achieved high electron doping density thus significant reduction of Schottky barrier width. As a proof-ofconcept, high-performance few-layer WS2 field-effect transistors (FETs) are demonstrated, exhibiting a high drain current of 380 uA/um, an on/off ratio of 4*106, and a peak field-effect mobility of 60 cm2/V*s. This doping technique provides a highly viable route to diminish the Rc in TMDs, paving the way for high-performance 2D nano-electronic devices., Comment: published in Nano Letters ASAP

This letter evaluates temporal and thermal stability of a state-of-the-art few-layer phosphorene MOSFET with Al2O3 surface passivation and Ti/Au top gate. As fabricated, the phosphorene MOSFET was stable in atmosphere for at least 100 h. With annealing at 200{\deg}C in dry nitrogen for 1 h, its drain current increased by an order of magnitude to approximately 100 mA/mm, which could be attributed to the reduction of trapped charge in Al2O3 and/or Schottky barrier at the source and drain contacts. Thereafter, the drain current was stable between -50{\deg}C and 150{\deg}C up to at least 1000 h. These promising results suggest that environmental protection of phosphorene should not be a major concern, and passivation of phosphorene should focus on its effect on electronic control and transport as in conventional silicon MOSFETs. With cutoff frequencies approaching the gigahertz range, the present phosphorene MOSFET, although far from being optimized, can meet the frequency and stability requirements of most flexible electronics for which phosphorene is intrinsically advantageous due to its corrugated lattice structure., Comment: To be published in IEEE Electron Device Letters

Although monolayer black phosphorus (BP) or phosphorene has been successfully exfoliated and its optical properties have been explored, most of electrical performance of the devices is demonstrated on few-layer phosphorene and ultra-thin BP films. In this paper, we study the channel length scaling of ultra-thin BP field-effect transistors (FETs), and discuss a scheme for using various contact metals to change transistor characteristics. Through studying transistor behaviors with various channel lengths, the contact resistance can be extracted from the transfer length method (TLM). With different contact metals, we find out that the metal/BP interface has different Schottky barrier heights, leading to a significant difference in contact resistance, which is quite different from previous studies of transition metal dichalcogenides (TMDs) such as MoS2 where Fermi-level is strongly pinned near conduction band edge at metal/MoS2 interface. The nature of BP transistors are Schottky barrier FETs, where the on and off states are controlled by tuning the Schottky barriers at the two contacts. We also observe the ambipolar characteristics of BP transistors with enhanced n-type drain current and demonstrate that the p-type carriers can be easily shifted to n-type or vice versus by controlling the gate bias and drain bias, showing the potential to realize BP CMOS logic circuits., Comment: Published in ACS Nano

We have determined the spin-orbit scattering length of two-dimensional layered 2H-TaSe2 metallic crystals by detailed characterization of the weak anti-localization phenomena in this strong spin-orbit interaction material. By fitting the observed magneto-conductivity, the spin-orbit scattering length for 2H-TaSe2 is determined to be 17 nm in the few-layer films. This small spin-orbit scattering length is comparable to that of Pt, which is widely used to study the spin Hall effect, and indicates the potential of TaSe2 for use in spin Hall effect devices. In addition to strong spin-orbit coupling, a material must also support large charge currents to achieve spin-transfer-torque via the spin Hall effect. Therefore, we have characterized the room temperature breakdown current density of TaSe2 in air, where the best breakdown current density reaches 3.7$\times$10$^7$ A/cm$^2$. This large breakdown current further indicates the potential of TaSe2 for use in spin-torque devices and two-dimensional device interconnect applications., Comment: to be published in ACS Nano

Phosphorene, an elemental 2D material, which is the monolayer of black phosphorus, has been mechanically exfoliated recently. In its bulk form, black phosphorus shows high carrier mobility (~10000 cm2/Vs) and a ~0.3 eV direct bandgap. Well-behaved p-type field-effect transistors with mobilities of up to 1000 cm2/Vs, as well as phototransistors, have been demonstrated on few-layer black phosphorus, showing its promise for electronics and optoelectronics applications due to its high hole mobility and thickness-dependence direct bandgap. However, p-n junctions, the basic building blocks of modern electronic and optoelectronic devices, have not yet been realized based on black phosphorus. In this paper, we demonstrate a gate tunable p-n diode based on a p-type black phosphorus/n-type monolayer MoS2 van der Waals p-n heterojunction. Upon illumination, these ultra-thin p-n diodes show a maximum photodetection responsivity of 418 mA/W at the wavelength of 633 nm, and photovoltaic energy conversion with an external quantum efficiency of 0.3%. These p-n diodes show promise for broadband photodetection and solar energy harvesting., Comment: 37 pages

In this paper, we report a novel chemical doping technique to reduce the contact resistance (Rc) of transition metal dichalcogenides (TMDs) - eliminating two major roadblocks (namely, doping and high Rc) towards demonstration of high-performance TMDs field-effect transistors (FETs). By using 1,2 dichloroethane (DCE) as the doping reagent, we demonstrate an active n-type doping density > 2*1019 cm-3 in a few-layer MoS2 film. This enabled us to reduce the Rc value to a record low number of 0.5 kohm*um, which is ~10x lower than the control sample without doping. The corresponding specific contact resistivity (pc) is found to decrease by two orders of magnitude. With such low Rc, we demonstrate 100 nm channel length (Lch) MoS2 FET with a drain current (Ids) of 460 uA/um at Vds = 1.6 V, which is twice the best value reported so far on MoS2 FETs., Comment: 2 pages, 13 figures,and 1 table. 2014 Symposium on VLSI Technology Digest of Technical Papers

Phosphorene is a unique single elemental semiconductor with two-dimensional layered structures. In this letter, we study the transistor behavior on mechanically exfoliated few-layer phosphorene with the top-gate. We achieve a high on-current of 144 mA/mm and hole mobility of 95.6 cm2/Vs. We deposit Al2O3 by atomic layer deposition (ALD) and study the effects of dielectric capping. We observe that the polarity of the transistors alternated from p-type to ambipolar with Al2O3 grown on the top. We attribute this transition to the changes for the effective Schottky barrier heights for both electrons and holes at the metal contact edges, which is originated from fixed charges in the ALD dielectric., Comment: To appear in IEEE Electron Dev. Lett

For the first time, n-type few-layer MoS2 field-effect transistors with graphene/Ti as the hetero-contacts have been fabricated, showing more than 160 mA/mm drain current at 1 {\mu}m gate length with an on-off current ratio of 107. The enhanced electrical characteristic is confirmed in a nearly 2.1 times improvement in on-resistance and a 3.3 times improvement in contact resistance with hetero-contacts compared to the MoS2 FETs without graphene contact layer. Temperature dependent study on MoS2/graphene hetero-contacts has been also performed, still unveiling its Schottky contact nature. Transfer length method and a devised I-V method have been introduced to study the contact resistance and Schottky barrier height in MoS2/graphene /metal hetero-contacts structure.

Preceding the current interest in layered materials for electronic applications, research in the 1960's found that black phosphorus combines high carrier mobility with a fundamental band gap. We introduce its counterpart, dubbed few-layer phosphorene, as a new 2D p-type material. Same as graphene and MoS2, phosphorene is flexible and can be mechanically exfoliated. We find phosphorene to be stable and, unlike graphene, to have an inherent, direct and appreciable band-gap that depends on the number of layers. Our transport studies indicate a carrier mobility that reflects its structural anisotropy and is superior to MoS2. At room temperature, our phosphorene field-effect transistors with 1.0 um channel length display a high on-current of 194 mA/mm, a high hole field-effect mobility of 286 cm2/Vs, and an on/off ratio up to 1E4. We demonstrate the possibility of phosphorene integration by constructing the first 2D CMOS inverter of phosphorene PMOS and MoS2 NMOS transistors.

In this article, we study the properties of metal contacts to single-layer molybdenum disulfide (MoS2) crystals, revealing the nature of switching mechanism in MoS2 transistors. On investigating transistor behavior as contact length changes, we find that the contact resistivity for metal/MoS2 junctions is defined by contact area instead of contact width. The minimum gate dependent transfer length is ~0.63 {\mu}m in the on-state for metal (Ti) contacted single-layer MoS2. These results reveal that MoS2 transistors are Schottky barrier transistors, where the on/off states are switched by the tuning the Schottky barriers at contacts. The effective barrier heights for source and drain barriers are primarily controlled by gate and drain biases, respectively. We discuss the drain induced barrier narrowing effect for short channel devices, which may reduce the influence of large contact resistance for MoS2 Schottky barrier transistors at the channel length scaling limit., Comment: ACS Nano, ASAP (2013)

We have characterized phase coherence length, spin orbit scattering length, and the Hall factor in n-type MoS2 2D crystals via weak localization measurements and Hall-effect measurements. Weak localization measurements reveal a phase coherence length of ~50 nm at T = 400 mK for a few-layer MoS2 film, decreasing as T^-1/2 with increased temperatures. Weak localization measurements also allow us, for the first time without optical techniques, to estimate the spin orbit scattering length to be 430 nm, pointing to the potential of MoS2 for spintronics applications. Via Hall-effect measurements, we observe a low temperature Hall mobility of 311 cm2/Vs at T = 1 K which decreases as a power law with a characteristic exponent {\gamma}=1.5 from 10 K to 60 K. At room temperature, we observe Hall mobility of 24 cm2/Vs. By determining the Hall factor for MoS2 to be 1.35 at T = 1 K and 2.4 at room temperature, we observe drift mobility of 420 cm2/Vs and 56 cm2/Vs at T = 1 K and room temperature, respectively., Comment: ACS Nano nn402377g

For the first time, polyethyleneimine (PEI) doping on multilayer MoS2 field-effect transistors are investigated. A 2.6 times reduction in sheet resistance, and 1.2 times reduction in contact resistance have been achieved. The enhanced electrical characteristics are also reflected in a 70% improvement in ON current, and 50% improvement in extrinsic field-effect mobility. The threshold voltage also confirms a negative shift upon the molecular doping. All studies demonstrate the feasibility of PEI molecular doping in MoS2 transistors, and its potential applications in layer-structured semiconducting 2D crystals.

Monolayer Molybdenum Disulfide (MoS2) with a direct band gap of 1.8 eV is a promising two-dimensional material with a potential to surpass graphene in next generation nanoelectronic applications. In this letter, we synthesize monolayer MoS2 on Si/SiO2 substrate via chemical vapor deposition (CVD) method and comprehensively study the device performance based on dual-gated MoS2 field-effect transistors. Over 100 devices are studied to obtain a statistical description of device performance in CVD MoS2. We examine and scale down the channel length of the transistors to 100 nm and achieve record high drain current of 62.5 mA/mm in CVD monolayer MoS2 film ever reported. We further extract the intrinsic contact resistance of low work function metal Ti on monolayer CVD MoS2 with an expectation value of 175 {\Omega}.mm, which can be significantly decreased to 10 {\Omega}.mm by appropriate gating. Finally, field-effect mobilities ({\mu}FE) of the carriers at various channel lengths are obtained. By taking the impact of contact resistance into account, an average and maximum intrinsic {\mu}FE is estimated to be 13.0 and 21.6 cm2/Vs in monolayer CVD MoS2 films, respectively.

High performance InGaAs gate-all-around (GAA) nanowire MOSFETs with channel length (Lch) down to 20nm have been fabricated by integrating a higher-k LaAlO3-based gate stack with an equivalent oxide thickness of 1.2nm. It is found that inserting an ultrathin (0.5nm) Al2O3 interfacial layer between higher-k and InGaAs can significantly improve the interface quality and reduce device variation. As a result, a record low subthreshold swing of 63mV/dec has been demonstrated at sub-80nm Lch for the first time, making InGaAs GAA nanowire devices a strong candidate for future low-power transistors., Comment: to appear in IEEE Electron Device Letters (3 pages, 5 figures)

In this article, we investigate electrical transport properties in ultrathin body (UTB) MoS2 two-dimensional (2D) crystals with channel lengths ranging from 2 {\mu}m down to 50 nm. We compare the short channel behavior of sets of MOSFETs with various channel thickness, and reveal the superior immunity to short channel effects of MoS2 transistors. We observe no obvious short channel effects on the device with 100 nm channel length (Lch) fabricated on a 5 nm thick MoS2 2D crystal even when using 300 nm thick SiO2 as gate dielectric, and has a current on/off ratio up to ~109. We also observe the on-current saturation at short channel devices with continuous scaling due to the carrier velocity saturation. Also, we reveal the performance limit of short channel MoS2 transistors is dominated by the large contact resistance from the Schottky barrier between Ni and MoS2 interface, where a fully transparent contact is needed to achieve a high-performance short channel device., Comment: 22 pages, 6 figures; ACS Nano, ASAP, 2012

InGaAs gate-all-around nanowire MOSFETs with channel length down to 50nm have been experimentally demonstrated by top-down approach. The nanowire size-dependent transport properties have been systematically investigated. It is found that reducing nanowire dimension leads to higher on-current, transconductance and effective mobility due to stronger quantum confinement and the volume inversion effect. TCAD quantum mechanical simulation has been carried out to study the inversion charge distribution inside the nanowires. Volume inversion effect appears at a larger dimension for InGaAs nanowire MOSFET than its Si counterpart., Comment: 3 pages, 4 figures, to appear in IEEE Electron Device Letters

We investigate the integration of Al2O3 high-k dielectric on two-dimensional (2D) crystals of boron nitride (BN) and molybdenum disulfide (MoS2) by atomic layer deposition (ALD). We demonstrate the feasibility of direct ALD growth with trimethylaluminum(TMA) and water as precursors on both 2D crystals. Through theoretical and experimental studies, we found that the initial ALD cycles play the critical role, during which physical adsorption dominates precursor adsorption at the semiconductor surface. We model the initial ALD growth stages at the 2D surface by analyzing Lennard-Jones Potentials, which could guide future optimization of the ALD process on 2D crystals., Comment: submitted to Appl. Phys. Lett

We demonstrate atomic-layer-deposited (ALD) high-k dielectric integration on two-dimensional (2D) layer-structured molybdenum disulfide (MoS2) crystals and MoS2 dual-gate n-channel MOSFETs with ALD Al2O3 as top-gate dielectric. Our C-V study of MOSFET structures shows good interface between 2D MoS2 crystal and ALD Al2O3. Maximum drain currents using back-gates and top-gates are measured to be 7.07mA/mm and 6.42mA/mm at Vds=2V with a channel width of 3 {\mu}m, a channel length of 9 {\mu}m, and a top-gate length of 3 {\mu}m. We achieve the highest field-effect mobility of electrons using back-gate control to be 517 cm^2/Vs. The highest current on/off ratio is over 10^8., Comment: submitted to IEEE Electron Device Letters

The first inversion-mode gate-all-around (GAA) III-V MOSFETs are experimentally demonstrated with a high mobility In0.53Ga0.47As channel and atomic-layer-deposited (ALD) Al2O3/WN gate stacks by a top-down approach. A well-controlled InGaAs nanowire release process and a novel ALD high-k/metal gate process has been developed to enable the fabrication of III-V GAA MOSFETs. Well-behaved on-state and off-state performance has been achieved with channel length (Lch) down to 50nm. A detailed scaling metrics study (S.S., DIBL, VT) with Lch of 50nm - 110nm and fin width (WFin) of 30nm - 50nm are carried out, showing the immunity to short channel effects with the advanced 3D structure. The GAA structure has provided a viable path towards ultimate scaling of III-V MOSFETs., Comment: IEEE IEDM 2011 pp. 769-772; Structures are valuable for low-dimensional physics study

We report dual-gate modulation of topological insulator field-effect transistors (TI FETs) made on Bi2Te3 thin flakes with integration of atomic-layer-deposited (ALD) Al2O3 high-k dielectric. Atomic force microscopy study shows that ALD Al2O3 is uniformly grown on this layer-structured channel material. Electrical characterization reveals that the right selection of ALD precursors and the related surface chemistry play a critical role in device performance of Bi2Te3 based TI FETs. We realize both top-gate and bottom-gate control on these devices, and the highest modulation rate of 76.1% is achieved by using simultaneous dual gate control., Comment: 4 pages, 3 figures