Search

Simultaneously improving device efficiency and stability is the most important issue in perovskite solar cell (PSC) research. Here, we strategically introduce a multi-functional interface layer (MFIL) with integrated roles of: (1) electron transport, (2) moisture barrier, (3) near-infrared photocurrent enhancement, (4) trap passivation, and (5) ion migration suppression to enhance the device performance. The narrow-band-gap non-fullerene acceptor, Y6, was screened out to replace the most commonly used PCBM in the inverted PSCs. A significantly improved power conversion efficiency of 21.0% was achieved, along with a remarkable stability (up to 1,700 h) without encapsulation under various external stimuli (light, heat, and moisture). Furthermore, systematic studies of the molecular orientation or passivation and the charge carrier dynamics at the interface between perovskite and MFIL were presented. These results offer deep insights for designing advanced interlayers and establish the correlations between molecular orientation, interface molecular bonding, trap state density, non-radiation recombination, and the device performance.

BackgroundThe Asian tiger mosquito, Aedes albopictus, an increasingly relevant arboviral vector, has spread worldwide. However, currently available tools are limited in terms of effective monitoring of vector populations and accurate determination of the extent of viral transmission, especially before and during outbreaks. Therefore, it is essential to develop novel monitoring and surveillance tools, particularly those that target adult mosquitoes and enhance the trapping efficiency for Ae. albopictus.MethodsA variety of human body odorants associated with different types of mosquito olfactory receptors were selected, and their attractiveness to Ae. albopictus was tested by a four-arm olfactometer. The optimal compatibility and proportion of the odorants, Mix-5, was observed via orthogonal design analyses. The attractiveness of Mix-5 to Ae. albopictus in the laboratory was assessed using Mosq-ovitraps and Electric Mosquito Killers. In the field, the effectiveness of generic BG-Lure, Mix-5 and a control treatment was compared with a baited Biogents Sentinel trap (BGS-trap) using a Latin square design.ResultsIn the olfactometer experiments, the attractiveness of the selected candidate compounds at varying dilutions was poor when the individual compounds were used alone. The optimal combination, Mix-5, was generated based on orthogonal design analyses. In the laboratory, the average numbers of female Ae. albopictus mosquitoes attracted by the synthetic odorant blend Mix-5 were 27.00 and 27.50, compared with 12.00 and 14.83 for the control, when using Mosq-ovitraps and Electric Mosquito Killers, respectively. In the field, the average number of Ae. albopictus female mosquitoes trapped by Mix-5 was 9.67 females/trap, whereas the average numbers for BG-Lure and the control were 7.78 and 4.47, respectively. The lure also played an important role in attracting Culex quinquefasciatus mosquitoes, and the average numbers of Cx. quinquefasciatus female mosquitoes attracted by Mix-5, BG-Lure and the control were 18.78, 25.11 and 12.22, respectively.ConclusionsA human odor-based bait blend was developed and exhibited enhanced effectiveness at attracting Ae. albopictus This blend can be used to monitor and trap dengue vector mosquitoes in Chinese cities.

BACKGROUND:Aedes albopictus (Skuse) is an invasive mosquito that has become an important vector of chikungunya, dengue and Zika viruses. In the absence of specific antiviral therapy or a vaccine, vector management is the sole method available for reducing Aedes-induced disease morbidity. Determining the resistance status of Ae. albopictus to insecticides and exploring the resistance mechanisms is essential for future vector control planning. METHODS:Aedes albopictus larvae and pupae were sampled from six sites (two sites each from urban, suburban and rural) in Guangzhou. The resistance bioassays were conducted against Bacillus thuringiensis israelensis (Bti): deltamethrin, propoxur and malathion for larvae; and deltamethrin, DDT, propoxur and malathion for adults. P450 monooxygenase (P450s), glutathione S-transferase (GSTs) and carboxylesterase (COEs) activities of adult mosquitoes were measured. Mutations at the knockdown resistance (kdr) gene were analyzed, and the association between kdr mutations and phenotypic resistance was tested. RESULTS:Adult bioassays revealed varied susceptibility against DDT, deltamethrin and propoxur in the six Ae. albopictus populations. Significantly lower mortality rates were found in urban populations than suburban and rural populations. Urban mosquito populations showed resistance against DDT, deltamethrin and propoxur, while one rural population was resistant to DDT. All populations tested were susceptible to malathion. Larval bioassays results indicated that all populations of Ae. albopictus were sensitive to the larvicide Bti and malathion. Resistance to deltamethrin and propoxur was common in larval populations. The F1534S and F1534 L mutations were found to be significantly associated with deltamethrin resistance. Biochemical assays indicated elevated detoxification enzyme activities in the field mosquito populations. CONCLUSIONS:Aedes albopictus populations in Guangzhou, especially in urban areas, have developed resistance to the commonly used insecticides, primarily DDT and deltamethrin. This finding calls for resistance management and developing counter measures to mitigate the spread of resistance.

In low-permeability fractured reservoirs, there is a generalized fluid displacement between the replacement fluid in the fracture and the matrix crude oil. This imbibition behavior plays a crucial role in the development of this type of reservoir. The experimental devices for studying static imbibition behavior are generally susceptible to air pollution on the surface of the test core and a long testing period; the experimental devices for studying dynamic imbibition behavior are generally unable to eliminate the driving action. A dual-purpose experimental setup and an experimental method for dynamic or static imbibition that can avoid the above defects were designed. A method of fracture fluid flow rate calculation and motor speed conversion is proposed, and the method is used to assist in setting the parameters of dynamic imbibition experiments. The device was applied to compare the experimental effects with the static imbibition bottle and the dynamic replacement imbibition, respectively, and the effect of fracture width on the dynamic imbibition of repellent oil was investigated. The results show that: the static imbibition recovery rate of the dynamic/static imbibition experimental device is 1.55 percentage points higher than that of the imbibition bottle; the dynamic imbibition recovery rate is 3–6 percentage points lower than that of the driving dynamic imbibition method, and it can reflect the influence of a single flow rate condition on the imbibition; imbibition in low-permeability fractured reservoirs is more likely to take place in the fracture in the interval of 50–100 μm in the width. [ABSTRACT FROM AUTHOR]

Reservoir transformation is essential for developing gas hydrate reservoirs. Predicting sediment brittleness is key to optimizing drilling design and evaluating engineering sweet spots. Constructing a brittleness index reflecting the brittle mineral content of a rock based on elastic parameters and predicting it using seismic data is a feasible solution for assessing reservoir brittleness. In addition, the elastic brittleness index can characterize the effect of complex pore types, fractures and pore fillings on rock brittleness. With the shallow hydrate reservoir in the sea as the research target. First, a novel brittleness index characterized by multiplying the Lamé parameter (λ$\lambda $) by Poisson's ratio (σ$\sigma $) is proposed. Its superiority in indicating brittle mineral content is verified by a rock‐physics model. Second, a reflection coefficient approximation equation including the novel brittleness index is derived, enabling direct estimation of reservoir brittleness from seismic data. The new brittleness index has proven to better reflect brittle mineral content and effectively indicate the high brittleness characteristics of hydrate reservoirs. The accuracy of the proposed approximate equation is verified by a layered medium model, and the viability of predicting the new brittleness index using seismic data is also theoretically supported by the model test. Finally, the proposed method has obtained favourable results in the application of hydrate work area data collected at the South China Sea, confirming its availability and practicality. [ABSTRACT FROM AUTHOR]

Mineral phases in which vanadium (V) and heavy-rare-earth elements (HREEs) coexist are rarely documented. Here, we report a new V-HREE-bearing silicate mineral species, wenlanzhangite-(Y), which is a vanadiferous derivate of jingwenite-(Y) [ Y 2 A l 2 V 2 4 + (S i O 4) 2 O 4 (O H) 4 ] coexisting with jingwenite-(Y) in bedded/massive ores at Yushui, South China. Wenlanzhangite-(Y) forms as a dark brown, 70–100 μm thick rim on a core domain of jingwenite-(Y), which occurs as 100–200 μm columnar crystals. The color, streak, luster, and hardness (Mohs) are dark brown, yellow-gray, vitreous, and ~4, respectively. Compared to jingwenite-(Y), wenlanzhangite-(Y) has higher vanadium and lower aluminum contents. Calculated on the basis of 8 cations, the empirical formula is (Y1.26Dy0.17Er0.11Gd0.09Yb0.09Nd0.09Sm0.06Sc0.04Ho0.03Ce0.02Tb0.02Tm0.02Pr0.01)Σ2.00 (V 1.46 3 + A l 0.54 ) Σ 2.00 V 2 4 + (S i O 4) 2 O 4 (O H) 4 , Which can be simplified to the ideal formula Y 2 V 2 3 + V 2 4 + (S i O 4) 2 O 4 (O H) 4 . Wenlanzhangite-(Y) is triclinic, with space group P 1 (#2), Z = 2, and unit-cell parameters a = 5.9632(7) Å, b = 9.599(1) Å, c = 9.9170(9) Å, α = 90.033(8)°, β = 98.595(2)°, γ = 90.003(9)°, and V = 561.28(10) Å3. Wenlanzhangite-(Y) is approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA2022-142). The structure of wenlanzhangite-(Y) is composed of a-axis-oriented chains of [VO6] octahedra consisting of edgesharing octahedra linked by insular [SiO2] tetrahedra, leaving open channels occupied by rare earth elements. Observed compositional variation and crystal structure demonstrate that V3+ can substitute for Al3+ in jingwenite-(Y), forming wenlanzhangite-(Y). The occurrence of wenlanzhangite-(Y) indicates a relatively more reducing hydrothermal environment, causing a reduction of V5+ in oxidized fluids to V3+ and thus represents a useful proxy for tracing the redox state of ore formation. [ABSTRACT FROM AUTHOR]

The Kaladawan iron deposit is located in the North Altyn Tagh and exhibits occurrences of iron ore bodies at the contact zone between Ordovician magmatic rocks (basalts, rhyolite, and granodiorite) and marble. However, controversy persists regarding the genetic classification and metallogenic mechanism of this deposit. Through a field investigation, single mineral in situ geochemical analysis, whole-rock geochemical analysis, and Fe isotope determination, the following conclusions are made: (1) Ti-(Ni/Cr) and (V/Ti)-Fe diagrams indicate that the magnetite from all studied rocks underwent hydrothermal metasomatism, while (Ni/(Cr + Mn))-(Ti + V) and (Ca + Al + Mn)-(Ti + V) diagrams suggest a skarn origin for these magnetites. Therefore, it can be inferred that the Kaladawan iron deposit is skarn-type. (2) The iron ore exhibits similar rare-earth-element characteristics to the altered basalt. Additionally, the altered basalts (δ56Fe = 0.024~0.100‰) are more enriched in light Fe isotopes than the unaltered basalts (δ56Fe = 0.129~0.197‰) at the same location, indicating that the ore-forming materials of the Kaladawan iron ore are mainly derived from basaltic rocks. (3) According to the law of mass conservation and the intermediate Fe isotopic composition of the iron ore between the granodiorite and basalt, the hydrothermal fluid for the formation of iron ores was inferred to be derived from the late intrusive granodiorite. [ABSTRACT FROM AUTHOR]

Photosynthetic microorganisms typically have multiple isoforms of the electron transfer protein ferredoxin, although we know little about their exact functions. Surprisingly, a Chlamydomonas reinhardtii mutant null for the ferredoxin-5 gene (FDX5) completely ceased growth in the dark, with both photosynthetic and respiratory functions severely compromised; growth in the light was unaffected. Thylakoid membranes in dark-maintained fdx5 mutant cells became severely disorganized concomitant with a marked decrease in the ratio of monogalactosyldiacylglycerol to digalactosyldiacylglycerol, major lipids in photosynthetic membranes, and the accumulation of triacylglycerol. Furthermore, FDX5 was shown to physically interact with the fatty acid desaturases CrΔ4FAD and CrFAD6, likely donating electrons for the desaturation of fatty acids that stabilize monogalactosyldiacylglycerol. Our results suggest that in photosynthetic organisms, specific redox reactions sustain dark metabolism, with little impact on daytime growth, likely reflecting the tailoring of electron carriers to unique intracellular metabolic circuits under these two very distinct redox conditions.