Search

Nitrogen-doped graphene quantum dots (N-GQDs) are widely used in biosensing, catalysis, and energy storage due to their excellent conductivity, high specific surface area, unique quantum size effects, and optical properties. In this paper, we successfully synthesized N-GQDs using a facile hydrothermal approach and investigated the effects of different hydrothermal temperatures and times on the morphology and structure of N-GQDs. The results indicated that the size of N-GQDs gradually increased and they eventually aggregated into graphene fragments with increasing temperature or reaction time. Notably, N-GQDs synthesized at 180 °C for 6 h exhibited the most uniform size, with an average diameter of approximately 3.48 nm, a height of 5–6 graphene layers, as well as favorable fluorescence properties. Moreover, the surface of N-GQDs contained abundant oxygen- and nitrogen-containing functional groups, which could provide numerous active sites for electrode reactions. The assembled electrode exhibited typical pseudocapacitive behavior with exceptional electrochemical performance, achieving a specific capacitance of 102 F g−1 at a current density of 1 A g−1. In a 10,000-cycle test, the electrode demonstrated excellent cycling stability with a capacitance retention rate of 78.5%, which laid the foundation for practical application of the electrode. This work successfully applied N-GQDs in supercapacitors, offering new insights into their development for the energy storage field. [ABSTRACT FROM AUTHOR]

Bimodal grain structure (BGS) Mg alloys containing a high fraction of fine grains (FGs) and a low fraction of coarse grains (CGs) show a good combination of strength and plasticity. Here, taking the ZK60 alloy as an example, the influences of CG size, volume fraction, and texture intensity on mechanical properties and the hetero-deformation-induced (HDI) effect were examined using the Mori–Tanaka mean-field method combined with strain gradient theory of plasticity. The results indicate that the overall mechanical properties decrease with an increase in CG size because the limited HDI effect cannot compensate for the strength and plasticity decrease derived from larger CGs. A higher aspect ratio of CG along the loading direction can weaken the HDI effect and subsequently reduce the overall mechanical properties. Optimal comprehensive mechanical properties can be achieved when the CG volume fraction is approximately 30%. Furthermore, an increasing basal texture intensity in CG results in higher yield strength and lower ultimate tensile strength, while the uniform elongation reaches a maximum value when ~60% of CGs possess hard orientations with Euler angles of (0~30°, 0°, 0°). [ABSTRACT FROM AUTHOR]

With the increasing demand for effective electromagnetic wave (EMW) absorbers due to the proliferation of electronic devices and 5G communication systems, traditional wave-absorbing materials can no longer meet the current requirements. Thus, this research introduces a three-dimensional (3D) composite material consisting of PMMA@Mxene@Co₃O₄ microspheres, prepared through in situ self-assembly and hydrothermal growth. The strong electrical conductivity of Mxene, combined with the magnetic loss of Co₃O₄, ensures enhanced dielectric–magnetic synergy, leading to excellent EMW absorption. The study investigates the influence of varying Co₃O₄ content on the electromagnetic properties of the composite. Experimental results show that the optimal sample, with a thickness of 2.5 mm, achieves a minimum reflection loss (RLmin) of −52.88 dB at 6.88 GHz and an effective absorption bandwidth (EAB) of 5.28 GHz. This work highlights the potential of 3D PMMA@Mxene@Co₃O₄ composites as high-performance microwave absorbers, providing a promising solution to EMW pollution. The findings offer valuable insights into material design strategies, demonstrate a promising pathway for developing lightweight, high-performance EMW absorbing materials by optimizing impedance matching and utilizing advanced microstructure design techniques. [ABSTRACT FROM AUTHOR]

Simple Summary: Our study comprehensively performed genome-wide analyses of the oxidative stress 3 gene family in four representative Gossypium species, including identifications of family members, evolutionary relationships, structural features, chromosomal locations, collinearity, cis-acting elements, and expression patterns. Furthermore, the potential functions of cotton OXS3 genes against multiple abiotic stresses were verified. These findings offer valuable insights for use in molecular breeding aimed at cotton germplasm innovation or genetic improvement. Oxidative Stress 3 (OXS3) encodes a plant-specific protein that makes great contributions to a plant's stress tolerance. However, reports on genome-wide identification and expression pattern analyses of OXS3 were only found for Arabidopsis, wheat, and rice. The genus Gossypium (cotton) serves as an ideal model for studying allopolyploidy. Therefore, two diploid species (G. raimondii and G. arboreum) and two tetraploid species (G. hirsutum and G. barbadense) were chosen in this study for a bioinformatics analysis, resulting in 12, 12, 22, and 23 OXS3 members, respectively. A phylogenetic tree was constructed using 69 cotton OXS3 genes alongside 8 Arabidopsis, 10 rice, and 9 wheat genes, which were classified into three groups (Group 1–3). A consistent evolutionary relationship with the phylogenetic tree was observed in our structural analysis of the cotton OXS3 genes and the clustering of six conserved motifs. Gene duplication analysis across the four representative Gossypium species suggested that whole-genome duplication, segmental duplication, and tandem duplication might play significant roles in the expansion of the OXS3 gene family. Some existing elements responsive to salicylic acid (SA), jasmonic acid (JA), and abscisic acid (ABA) were identified by cis-regulatory element analysis in the promoter regions, which could influence the expression levels of cotton OXS3 genes. Furthermore, the expression patterns of the GhOXS3 gene were examined in different tissues or organs, as well as in developing ovules and fibers, with the highest expression observed in ovules. GhOXS3 genes exhibited a more pronounced regulatory response to abiotic stresses, of which ten GhOXS3 genes showed similar expression patterns under cold, heat, salt, and drought treatments. These observations were verified by quantitative real-time PCR experiments. These findings enhance our understanding of the evolutionary relationships and expression patterns of the OXS3 gene family and provide valuable insights for the identification of vital candidate genes for trait improvement in cotton breeding. [ABSTRACT FROM AUTHOR]

The quantitative assessment of aircraft skin paint removal can more objectively reflect the efficacy of laser paint stripping. Post-laser paint removal, a comprehensive evaluation was conducted through both two-dimensional image analysis and three-dimensional profile analysis. This yielded two-dimensional cleanliness parameters based on the coverage of residual paint and three-dimensional removal efficiency metrics based on the volume of the stripped coating. The findings revealed that the two-dimensional cleanliness levels achieved by laser paint removal at varying degrees were recorded as 21.17%, 45.02%, 57.35%, 79.16%, and 97.79% respectively. Correspondingly, the three-dimensional removal rates were quantified at 85.94%, 87.97%, 89.12%, 94.84%, and 99.52% respectively. This research successfully provides an intuitive and quantitative characterization of both the two-dimensional cleanliness and three-dimensional removal rate in laser paint stripping, offering valuable references and a solid foundation for the objective and practical evaluation of laser paint removal effectiveness. [ABSTRACT FROM AUTHOR]

Objective: Clinical practice guidelines (CPGs) for Integrated Traditional Chinese and Western Medicine (TCM and WM) are important medical documents used to assist medical decision‐making and are of great significance for standardizing clinical pathways. However, due to the constraints of text format, it is difficult for Integrated TCM and WM CPGs to play a real role in medical practice. In addition, how to standardize the structure and semantic relationships between Integrated TCM and WM CPG knowledge, and realize the construction of computable, sharable and reliable CPGs, remains an urgent issue to be addressed. Therefore, we are proposing an ontology of CPGs for Integrated TCM and WM. Methods: We first initialized domain concepts and relationships to ensure the accuracy of the ontology knowledge structure. We then screened CPGs that meet the standards for Integrated TCM and WM, analyzed and classified the contents, and extracted the common structures. Based on the seven‐step ontology construction method combined with inference‐complement, referring to the representation methods and hierarchical relationships of terms and concepts in MeSH, ICD‐10, SNOMED‐CT, and other ontologies and terminology sets, we formed the concept structure and semantic relationship tables for the ontology. We also achieved the matching and mapping between the ontology and reference ontologies and term sets. Next, we defined the aspects and constraints of properties, selected multiple Integrated TCM and WM CPGs as instances to populate, and used ontology reasoning tools and formulated defined inference rules to reason and extend the ontology. Finally, we evaluated the performance of the ontology. Results: The content of the Integrated TCM and WM CPGs is divided into nine parts: basic information, background, development method, clinical question, recommendation, evidence, conclusion, result, and reason for recommendations. The Integrated TCM and WM CPG ontology has 152 classes and defines 90 object properties and 114 data properties, with a maximum classification depth of 4 layers. The terms of disease, drug and examination item names in the ontology have been standardized. Conclusions: This study proposes an Integrated TCM and WM CPG ontology. The ontology adopts a modular design, which has both sharing and scaling ability, and can express rich guideline knowledge. It provides important support for the semantic processing and computational application of guideline documents. [ABSTRACT FROM AUTHOR]

We experimentally demonstrate a scheme for generating massively parallel and real-time physical random bits (PRBs) by using weak-resonant-cavity Fabry-Perot laser diodes (WRC-FPLDs) with optical feedback. By using external optical feedback to modify the nonlinear dynamic behavior of the longitudinal modes in WRC-FPLDs, the chaotic behavior of each channel can be induced under suitable feedback strength. By filtering these longitudinal modes, a real-time PRBs at 10 Gbits/s can be generated by using field programmable gate array (FPGA) board for the real-time post-processing of a single-channel chaotic signal. Considering the presence of up to 70 longitudinal modes within a broad spectral range exceeding 40 nm, each of these modes can be used to extract chaotic time sequences for random number generation. Therefore, our PRB generation scheme has the potential to achieve a data throughput of over 700 Gbits/s. [ABSTRACT FROM AUTHOR]