314 results on '"Vergnaud, J.M."'
Search Results
52. Process of drying a polymeric paint by diffusion-evaporation and shrinkage. Determination of the concentration-dependent diffusivity
53. Correlations between the state of cure of unsaturated polyester coatings and their behaviour to water at 60 °C
54. PROCESS OF DRUG DELIVERY FROM ORAL DOSAGE FORMS WITH A POLYMER MATRIX MADE OF GELUCIRES
55. Correlation between the state of cure of a thermoset resin and its hardness
56. Deconvolution of the thermal effects of the heat of conduction and heat of cure reaction for an unsaturated polyester
57. Release of iodine from wood in finite volumes of water in succession
58. Computation of drug concentrations in endocardial vegetations in patients during antibiotic therapy
59. Intravegetation antimicrobial distribution in endocarditis: A numerical model and establishment of the conditions for an in-vitro test
60. Absorption-desorption history of water at 100° by polyurethane foam
61. Radial Diffusion in a Sphere with Subsequent Change in Dimension. Desorption with a Finite Surface Coefficient of Mass Transfer in an Infinite Volume
62. Diffusion of a chemical through the liquid located in a polymer: Modelling and experiments
63. Dosage Form for Controlled Delivery to the Intestine of a Drug Soluble in Gastric Liquid and Poorly Soluble in Intestinal Liquid
64. Séchage des formes médicamenteuses avec matrice polymère préparées par voie humide
65. Controlled Release of Iodine in Water by Using Wood
66. Correlation between dynamic mechanical properties and state of cure for bulk moulding compounds
67. The effect of thermal parameters on the cure of a bulk moulding composite with polyester
68. Absorption of water by polyurethane foam. modelling and experiments
69. Effect of the operational conditions on the process of cure of thermoset resins
70. Process of Absorption of Moisture by Wood in Case of Condensation. Modelling and Experiment
71. Plasticized PVC with low matter transfers in n-hexane by fixing a thin film of ethylene glycol on its surface
72. Injection moulding of thermosets. Effect of the temperature of injection
73. Increase in cure of thermosets after extraction out of the mould
74. Liquid transport controlled release processes in polymeric materials: Applications to oral dosage forms
75. Comparison of the Absorption and Desorption of Water Between Scots Pine and Spruce after Submersion in Water
76. Dying of Polymeric and Solid Materials
77. Plasticized PVC with low matter transfers prepared by pre-immersing in n-hexane and testing in methanol
78. Diethyl Phthalate Migration Through Novolac Epoxy Compositions: Kinetics and Concentration
79. Preparation of plasticized pvc packagings with low matter transfers in n-hexane by using a pre-immersion in methanol
80. Regulation of the process of cure of thermosets by varying the temperature of the mould
81. Process of absorption of a liquid by a thin sheet of polymer by considering diffusion and change in dimension
82. Regulation of the process of cure of thermosets by varying the coefficient of surface heat transfer
83. Kinetics of absorption of toluene by coatings made of epoxy resin; modelling and experiments
84. Preparation of plasticized PVC coatings with low matter transfers by using n-pentane
85. Modelling of the drying process of polyurethane foam
86. Effect of temperature on the cure of a sheet of maleic polyester resin heated by oil. Modelling and experiments
87. Modelling the Process of Absorption and Desorption of Water in a Sheet beyond the Fiber Saturation Point by Considering a Two-Dimensional Transfer
88. Cuisson des résines thermodurcissables
89. MODELLING OF THE DRYING PROCESS OF WOOD IN 3-DIMENSIONS
90. Effect of the Volume of the Surrounding Atmosphere on the Drying Process of Dosage Forms Made of Polymer and Drug
91. Dosage Forms with a Core Made of a Swelling Polymer and a Polymer Matrix with an Erodible Shell
92. Effect of temperature on the transfer between epoxy coatings and water
93. Modelling the process of absorption of toluene by coatings made of epoxy resin
94. Modelling of the process of desorption of liquid by polymer beads, by considering diffusion and shrinkage
95. Process of cure of a maleic polyester resin. Modelling and experiments with thin slab in metal mould
96. Absorption of water at 100°C by polyurethane foam
97. Absorption and Desorption of Water along the Longitudinal Axis above and below the Fiber Saturation Point (Short Time of Absorption)
98. Correlation of Dynamic Properties of Vulcanizates with Their State of Cure
99. Plasticizer Transfer in Plasticized PVC-Polyurethane Sandwiches
100. Modelling the curing of epoxy-resin coating at low temperature (50°C)
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.