Search

The aviation industry relies on lightweight carbon fiber-reinforced polymers (CFRP) for fuel efficiency, which necessitates lightning strike protection (LSP) and electromagnetic shielding due to their electrical insulating characteristics. Traditional metallic meshes used for LSP are heavy and corrosion-prone, prompting the exploration of alternatives. This research showcases CFRP nanocomposites with enhanced LSP properties through the incorporation of graphene nanoplatelets (GNPs) and carbon nanotubes (CNTs). While the enhanced conductivity in the nanofilled epoxy matrix did not impact the overall conductivity of CFRP panels, a significant damage reduction was observed after simulated lightning strike tests. Similar approaches in the literature have also noted this discrepancy, but no attempts to reconcile it have been made. This work provides a framework to explain the damage reduction mechanism while accounting for the modest conductivity improvements in the nanoreinforced CFRPs. Additionally, a simple, nondestructive method to assess surface resin degradation after a lightning strike test is proposed, based on the fluorescence of diphenyl ketones. The discussion is supported by electrical conductivity measurements, damage pattern evaluation using the proposed UV-illumination method, ATR-FTIR, and scanning electron microscopy analysis pre- and postlightning strike simulation., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Temperature homeostasis is critical for cells to perform their physiological functions. Among the diverse methods for temperature detection, fluorescent temperature probes stand out as a proven and effective tool, especially for monitoring temperature in cells and suborganelles, with a specific emphasis on mitochondria. The utilization of these probes provides a new opportunity to enhance our understanding of the mechanisms and interconnections underlying various physiological activities related to temperature homeostasis. However, the complexity and variability of cells and suborganelles necessitate fluorescent temperature probes with high resolution and sensitivity. To meet the demanding requirements for intracellular/subcellular temperature detection, several strategies have been developed, offering a range of options to address this challenge. This review examines four fundamental temperature-response strategies employed by small molecule and polymer probes, including intramolecular rotation, polarity sensitivity, Förster resonance energy transfer, and structural changes. The primary emphasis was placed on elucidating molecular design and biological applications specific to each type of probe. Furthermore, this review provides an insightful discussion on factors that may affect fluorescent thermometry, providing valuable perspectives for future development in the field. Finally, the review concludes by presenting cutting-edge response strategies and research insights for mitigating biases in temperature sensing.

Gadolinium chelates are employed worldwide today as clinical contrast agents for magnetic resonance imaging. Until now, the commonly used linear contrast agents based on the rare-earth element gadolinium have been considered safe and well-tolerated. Recently, concerns regarding this type of contrast agent have been reported, which is why there is an urgent need to develop the next generation of stable contrast agents with enhanced spin-lattice relaxation, as measured by improved T 1 relaxivity at lower doses. Here, we show that by the integration of gadolinium ions in cerium oxide nanoparticles, a stable crystalline 5 nm sized nanoparticulate system with a homogeneous gadolinium ion distribution is obtained. These cerium oxide nanoparticles with entrapped gadolinium deliver strong T 1 relaxivity per gadolinium ion ( T 1 relaxivity, r 1 = 12.0 mM -1 s -1 ) with the potential to act as scavengers of reactive oxygen species (ROS). The presence of Ce 3+ sites and oxygen vacancies at the surface plays a critical role in providing the antioxidant properties. The characterization of radial distribution of Ce 3+ and Ce 4+ oxidation states indicated a higher concentration of Ce 3+ at the nanoparticle surfaces. Additionally, we investigated the ROS-scavenging capabilities of pure gadolinium-containing cerium oxide nanoparticles by bioluminescent imaging in vivo, where inhibitory effects on ROS activity are shown., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Activatable fluorescent probes have been successfully used as molecular tools for biomedical research in the last decades. Fluorescent probes allow the detection of molecular events, providing an extraordinary platform for protein and cellular research. Nevertheless, most of the fluorescent probes reported are susceptible to interferences from endogenous fluorescence (background signal) and limited tissue penetration is expected. These drawbacks prevent the use of fluorescent tracers in the clinical setting. To overcome the limitation of fluorescent probes, we and others have developed activatable magnetic resonance probes. Herein, we report for the first time, an oligonucleotide-based probe with the capability to detect bacteria using magnetic resonance imaging (MRI). The activatable MRI probe consists of a specific oligonucleotide that targets micrococcal nuclease (MN), a nuclease derived from Staphylococcus aureus. The oligonucleotide is flanked by a superparamagnetic iron oxide nanoparticle (SPION) at one end, and by a dendron functionalized with several gadolinium complexes as enhancers, at the other end. Therefore, only upon recognition of the MRI probe by the specific bacteria is the probe activated and the MRI signal can be detected. This approach may be widely applied to detect bacterial infections or other human conditions with the potential to be translated into the clinic as an activatable contrast agent., (© 2021. The Author(s).)

Cerium oxide nanoparticles with integrated gadolinium have been proved to be useful as contrast agents in magnetic resonance imaging. Of question is their performance in dual-energy computed tomography. The aims of this work are to determine (1) the relation between the computed tomography number and the concentration of the I, Gd or Ce contrast agent and (2) under what conditions it is possible to resolve the type of contrast agent. Hounsfield values of iodoacetic acid, gadolinium acetate and cerium acetate dissolved in water at molar concentrations of 10, 50 and 100 mM were measured in a water phantom using the Siemens SOMATOM Definition Force scanner; gadolinium- and cerium acetate were used as substitutes for the gadolinium-integrated cerium oxide nanoparticles. The relation between the molar concentration of the I, Gd or Ce contrast agent and the Hounsfield value was linear. Concentrations had to be sufficiently high to resolve the contrast agents., (© The Author(s) 2021. Published by Oxford University Press.)

Metal oxide nanoparticles are widely used in both consumer products and medical applications, but the knowledge regarding exposure-related health effects is limited. However, it is challenging to investigate nanoparticle interaction processes with biological systems. The overall aim of this project was to improve the possibility to predict exposure-related health effects of metal oxide nanoparticles through interdisciplinary collaboration by combining workflows from the pharmaceutical industry, nanomaterial sciences, and occupational medicine. Specific aims were to investigate nanoparticle-protein interactions and possible adverse immune reactions. Four different metal oxide nanoparticles; CeO x nanocrystals with 5% or 14% Gd, Co 3 O 4 , and Fe 2 O 3 , were characterized by dynamic light scattering and high-resolution transmission electron microscopy. Nanoparticle-binding proteins were identified and screened for HLA-binding peptides in silico . Monocyte interaction with nanoparticle-protein complexes was assessed in vitro . Herein, for the first time, immunogenic properties of nanoparticle-binding proteins have been characterized. The present study indicates that especially Co 3 O 4 -protein complexes can induce both 'danger signals', verified by the production of inflammatory cytokines and simultaneously bind autologous proteins, which can be presented as immunogenic epitopes by MHC class II. The clinical relevance of these findings should be further evaluated to investigate the role of metal oxide nanoparticles in the development of autoimmune disease. The general workflow identified experimental difficulties, such as nanoparticle aggregate formation and a lack of protein-free buffers suitable for particle characterization, protein analyses, as well as for cell studies. This confirms the importance of future interdisciplinary collaborations.

Given the breadth of currently arising opportunities and concerns associated with nanoparticles for biomedical imaging, various types of nanoparticles have been widely exploited, especially for cellular/subcellular level probing. However, most currently reported nanoparticles either have inefficient delivery into cells or lack specificity for intracellular destinations. The absence of well-defined nanoplatforms remains a critical challenge hindering practical nano-based bio-imaging. Herein, the authors elaborate on a tailorable membrane-penetrating nanoplatform as a carrier with encapsulated actives and decorated surfaces to tackle the above-mentioned issues. The tunable contents in such a versatile nanoplatform offer huge flexibility to reach the expected properties and functions. Aggregation-induced emission luminogen (AIEgen) is applied to achieve sought-after photophysical properties, specific targeting moieties are installed to give high affinity towards different desired organelles, and critical grafting of cell-penetrating cyclic disulfides (CPCDs) to promote cellular uptake efficiency without sacrificing the specificity. Hereafter, to validate its practicability, the tailored nano products are successfully applied to track the dynamic correlation between mitochondria and lysosomes during autophagy. The authors believe that the strategy and described materials can facilitate the development of functional nanomaterials for various life science applications., (© 2021 The Authors. Small published by Wiley-VCH GmbH.)

Amines are widely employed as additives for improving the performance of metal halide perovskite optoelectronic devices. However, amines are well-known for their high chemical reactivity, the impact of which has yet to receive enough attention from the perovskite light-emitting diode community. Here, by investigating an unusual positive aging effect of CH 3 NH 3 I/CsI/PbI 2 precursor solutions as an example, we reveal that amines gradually undergo N-formylation in perovskite precursors over time. This reaction is initialized by hydrolysis of dimethylformamide in the acidic chemical environment. Further investigations suggest that the reaction products collectively impact perovskite crystallization and eventually lead to significantly enhanced external quantum efficiency values, increasing from ∼2% for fresh solutions to ≳12% for aged ones. While this case study provides a positive aging effect, a negative aging effect is possible in other perovksite systems. Our findings pave the way for more reliable and reproducible device fabrication and call for further attention to underlying chemical reactions within the perovskite inks once amine additives are included.

Competing Interests: Conflict of interest Olle Inganäs has ownership in Epishine AB, developing printed organic photovoltaic devices. The other authors declared that they have no conflict of interest.

In this work, we report a novel protein-based nanoprobe (PNP) that can be employed for quantitative analysis of Cu 2+ in pure water medium and real samples. Structurally, the proposed nanoprobe comprises a biofriendly protein (hen egg-white lysozyme (HEWL)) and a Cu 2+ -specific chromogenic agent, where HEWL acts as a nanocarrier encapsulating a structurally tailored rhodamine B derivate. The resulting PNP exhibits a hydrodynamic diameter of ~ 106 nm and efficiently disperses in water, enabling the detection of Cu 2+ in pure aqueous systems without the aid of any organic co-solvents. The high sensitivity and selectivity of PNP allow the colorimetric detection of Cu 2+ in the presence of other metal interferents with a low detection limit of 160 nM. The satisfying recovery of trace level Cu 2+ in environmental samples demonstrate the great potential of employing PNP for the determination of Cu 2+ in actual applications. Most importantly, the simple co-grinding method employing proteins and chromogenic agents provides a novel strategy to generate sensing systems that are useful detection of pollutants in aqueous samples., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Photoemission electron microscopy and imaging X-ray photoelectron spectroscopy are today frequently used to obtain chemical and electronic states, chemical shifts, work function profiles within the fields of surface- and material sciences. Lately, because of recent technological advances, these tools have also been valuable within life sciences. In this study, we have investigated the power of photoemission electron microscopy and imaging X-ray photoelectron spectroscopy for visualization of human neutrophil granulocytes. These cells, commonly called neutrophils, are essential for our innate immune system. We hereby investigate the structure and morphology of neutrophils when adhered to gold and silicon surfaces. Energy-filtered imaging of single cells are acquired. The characteristic polymorphonuclear cellular nuclei divided into 2-5 lobes is visualized. Element-specific imaging is achieved based on O 1s, P 2p, C 1s, Si 2p, and N 1s core level spectra, delivering elemental distribution with submicrometer resolution, illustrating the strength of this type of cellular morphological studies.

A rhodamine B-based sensor (RS) was designed and synthesized by a combination of the spirolacton rhodamine B (fluorophore) and multidentate chelates (ionophore) with high affinity towards Hg 2+ . In the presence of Hg 2+ , the resulting red-orange fluorescence (under UV light) and naked eye red color of RS are supposed to be used for quantitative and qualitative measurement of Hg 2+ . Further fluorescent titration and analysis demonstrate that RS can selectively detect Hg 2+ within 1 s with a low limit of detection (LOD) of 16 nM in acetonitrile media, meanwhile, the association constant (K a ) was calculated to be 0.32 × 10 5  M -1 . More importantly, the resultant complex (RSHg) of RS and Hg 2+ has also been successfully applied to detect limited water content in acetonitrile solution., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier B.V.)

Transition-metal oxides (TMOs) are potential candidates for anode materials of lithium-ion batteries (LIBs) due to their high theoretical capacity (∼1000 mA h/g) and enhanced safety from suppressing the formation of lithium dendrites. However, the poor electron conductivity and the large volume expansion during lithiation/delithiation processes are still the main hurdles for the practical usage of TMOs as anode materials. In this work, the CoSnO 3 @NC@MnO@NC hierarchical nanobox (CNMN) is then proposed and fabricated to solve those issues. The as-prepared nanobox contains hollow cubic CoSnO 3 as a core and dual N-doped carbon-"sandwiched" MnO particles as a shell. As anode materials of LIBs, the hollow and carbon interlayer structures effectively accommodate the volume expansion while dual active TMOs of CoSnO 3 and MnO efficiently increase the specific capacity. Notably, the dual-layer structure of N-doped carbons plays a critical functional role in the incorporated composites, where the inner layer serves as a reaction substrate and a spatial barrier and the outer layer offers electron conductivity, enabling more effective involvement of active anode materials in lithium storage, as well as maintaining their high activity during lithium cycling. Subsequently, the as-prepared CNMN exhibits a high specific capacity of 1195 mA h/g after the 200th cycle at 0.1C and an excellent stable reversible capacity of about 876 mA h/g after the 300th cycle at 0.5C with only 0.07 mA h/g fade per cycle after 300 cycles. Even after a 250 times fast charging/discharging cycle both at 5C, it still retains a reversible capacity of 422.6 mA h/g. We ascribe the enhanced lithium storage performances to the novel hierarchical architectures achieved from the rational design.

Intracellular lipid metabolism occurs in lipid droplets (LDs), which is critical to the survival of cells. Imaging LDs is an intuitive way to understand their physiology in live cells. However, this is limited by the availability of specific probes that can properly visualize LDs in vivo. Here, an LDs-specific red-emitting probe is proposed to address this need, which is not merely with an ultrahigh signal-to-noise (S/N) ratio and a large Stokes shift (up to 214 nm) but also with superior resistance to photobleaching. The probe has been successfully applied to real-time tracking of intracellular LDs behaviors, including fusion, migration, and lipophagy processes. We deem that the proposed probe here offers a new possibility for deeper understanding of LDs-associated behaviors, elucidation of their roles and mechanisms in cellular metabolism, and determination of the transition between adaptive lipid storage and lipotoxicity as well.

Fluorophores and probes are invaluable for the visualization of the location and dynamics of gene expression, protein expression, and molecular interactions in complex living systems. Rhodamine dyes are often used as scaffolds in biological labeling and turn-on fluorescence imaging. To date, their absorption and emission spectra have been expanded to cover the entire near-infrared region (650-950 nm), which provides a more suitable optical window for monitoring biomolecular production, trafficking, and localization in real time. This review summarizes the development of rhodamine fluorophores since their discovery and provides strategies for modulating their absorption and emission spectra to generate specific bathochromic-shifts. We also explain how larger Stokes shifts and dual-emissions can be obtained from hybrid rhodamine dyes. These hybrid fluorophores can be classified into various categories based on structural features including the alkylation of amidogens, the substitution of the O atom of xanthene, and hybridization with other fluorophores., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Hypochlorous acid (HClO) is one of the most important ROS (reactive oxygen species) and common pollutant in tap-water. However, the determination of HClO with fast response and high sensitivity/selectivity is still an urgent demanding. Here we fabricated a ratiometric fluorescent probe RC based on TBET (through-bond energy transfer) on the platform of coumarin and rhodamine with the thiosemicarbazide group as the linker. This probe could display the characteristic fluorescence emission of coumarin. Upon addition of HClO, the linker was reacted into an oxadiazole, resulting in the opening of spiro-ring of rhodamine. The resultant then gives ratiometric fluorogenic changes. The probe exhibits fast response and high selectivity and sensitivity towards HClO with a low limit of detection (~140 nM). Eventually, RC is successfully applicated for determining spiked HClO in water samples and imaging endogenous HClO in living cells., (Copyright © 2019. Published by Elsevier B.V.)

Gases, such as nitrogen dioxide, formaldehyde and benzene, are toxic even at very low concentrations. However, so far there are no low-cost sensors available with sufficiently low detection limits and desired response times, which are able to detect them in the ranges relevant for air quality control. In this work, we address both, detection of small gas amounts and fast response times, using epitaxially grown graphene decorated with iron oxide nanoparticles. This hybrid surface is used as a sensing layer to detect formaldehyde and benzene at concentrations of relevance (low parts per billion). The performance enhancement was additionally validated using density functional theory calculations to see the effect of decoration on binding energies between the gas molecules and the sensor surface. Moreover, the time constants can be drastically reduced using a derivative sensor signal readout, allowing the sensor to work at detection limits and sampling rates desired for air quality monitoring applications.

A complementary metal-oxide-semiconductor (CMOS) chip biosensor was developed for cell viability monitoring based on an array of capacitance sensors utilizing a ring oscillator. The chip was packaged in a low temperature co-fired ceramic (LTCC) module with a flip chip bonding technique. A microcontroller operates the chip, while the whole measurement system was controlled by PC. The developed biosensor was applied for measurement of the proliferation stage of adherent cells where the sensor response depends on the ratio between healthy, viable and multiplying cells, which adhere onto the chip surface, and necrotic or apoptotic cells, which detach from the chip surface. This change in cellular adhesion caused a change in the effective permittivity in the vicinity of the sensor element, which was sensed as a change in oscillation frequency of the ring oscillator. The sensor was tested with human lung epithelial cells (BEAS-2B) during cell addition, proliferation and migration, and finally detachment induced by trypsin protease treatment. The difference in sensor response with and without cells was measured as a frequency shift in the scale of 1.1 MHz from the base frequency of 57.2 MHz. Moreover, the number of cells in the sensor vicinity was directly proportional to the frequency shift.

A novel donor-π-acceptor-π-donor type (D-π-A-π-D') Schiff base derivative (L) has been designed and synthesized. The structure of L is confirmed by single-crystal X-ray diffraction analysis as well. The photophysical properties of compound L were comprehensively investigated by using both experimental and theoretical methods. The results indicate that L exhibits large Stokes shift and moderate two-photon action (2PA) cross-section in the near infrared (NIR) region. Furthermore, the confocal microscopy imaging study demonstrates that compound L could penetrate into cells and target the cellular mitochondria compartment. Due to its low cytotoxicity, compound L provides a promising tool for directly lighting up the mitochondria compartment in living HepG2 cells., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The chelating gadolinium-complex is routinely used as magnetic resonance imaging (MRI) -contrast enhancer. However, several safety issues have recently been reported by FDA and PRAC. There is an urgent need for the next generation of safer MRI-contrast enhancers, with improved local contrast and targeting capabilities. Cerium oxide nanoparticles (CeNPs) are designed with fractions of up to 50% gadolinium to utilize the superior MRI-contrast properties of gadolinium. CeNPs are well-tolerated in vivo and have redox properties making them suitable for biomedical applications, for example scavenging purposes on the tissue- and cellular level and during tumor treatment to reduce in vivo inflammatory processes. Our near edge X-ray absorption fine structure (NEXAFS) studies show that implementation of gadolinium changes the initial co-existence of oxidation states Ce 3+ and Ce 4+ of cerium, thereby affecting the scavenging properties of the nanoparticles. Based on ab initio electronic structure calculations, we describe the most prominent spectral features for the respective oxidation states. The as-prepared gadolinium-implemented CeNPs are 3-5 nm in size, have r 1 -relaxivities between 7-13 mM -1  s -1 and show clear antioxidative properties, all of which means they are promising theranostic agents for use in future biomedical applications.

A two-photon active probe for physiological copper (Cu2+) detection is expected to play an important role in monitoring biological metabolism. Herein, a novel Schiff base derivative (E)-2,2'-((4-((4-(diethylamino)-2-hydroxybenzylidene)amino)phenyl)azanediyl)bis(ethan-1-ol) (L) with remarkable two-photon activity was developed and synthetically investigated. L presents high selectivity and sensitivity for Cu2+ sensing in ethanol/HEPES buffer (v/v, 1 : 1), which is accompanied by the fluorescence switching "off" and subsequently "on" with the addition of EDTA. The mechanism for the detection of Cu2+ is further analyzed using 1H NMR titration, mass spectra and theoretical calculations. Furthermore, since the probe L possesses good photophysical properties, excellent biocompatibility and low cytotoxicity, it is successfully applied to track Cu2+ in the cellular endoplasmic reticulum by two-photon fluorescence imaging, showing its potential value for practical applications in biological systems.

Combined photoemission electron microscopy (PEEM) and imaging x-ray photoelectron spectroscopy (XPS), i.e., electron spectroscopy for chemical analysis in the nanoregion, has been used for surface characterization of bio-relevant and biological samples. In the first example, the authors prepared a gold patterned silicon substrate, stepwise surface modified by self-assembled monolayers followed by quantum dot (QDot) specific linking and investigated by means of work function mapping and elemental imaging in the submicrometer range. Spatially resolved core level images of C1s, V2p, and Y3d are obtained, which verify the selective thiol adsorption on the gold squares and specific binding of europium doped yttrium vanadate QDots on the self-assembled monolayer. The second example is platelet adhesion to Immunoglobulin G modified silicon surfaces, investigated by means of laterally resolved PEEM. Images of platelets clearly show activated cells with a morphology change including an enlarged surface area and elongated pseudopodia, with a lateral resolution of 140 nm. In the last example, neutrophils were allowed to attach to plain silicon surfaces and investigated by means of PEEM and imaging XPS. Here, the cells show a round shaped morphology, as expected. Threshold imaging with work function contrast is used to localize the area of interest, followed by elemental specific mapping on cells in the submicrometer region. Chemical shifts of C1s in photoemission are used to distinguish vital parts of the cell structure. The strong C1s (C-C) signal is achieved from the region of the cell membrane, i.e., high density of phospholipids, while C1s (C-N) and C1s (C-O) signals are obtained from the core of the cell, in good agreement with the presence of cytoplasm and deoxyribonucleic acid containing cell nucleus. The combination of PEEM and imaging XPS is shown here as a tool to deliver new insight into biological samples, i.e., a rapid sample overview is obtained based on low energy secondary electrons with work function contrast, followed by detailed studies in the narrow mode for elemental compositions based on photoemission. This study illustrates the strength of combined PEEM and XPS in the imaging mode on cell studies.

Small, biocompatible and water-soluble molecules with high two-photon absorption (2PA) cross-section values ( δ ) are in high demand for specific bioimaging applications. Here, two novel terpyridine derivative ligands with donor-acceptor (D-A) ( L1 ) and donor-π-acceptor (D-π-A) ( L2 ) models, and their corresponding Zn(ii) complexes are designed and characterized. It was found that the two-photon absorption cross section values ( δ ) in the near-infrared region (NIR, about 800 nm) are significantly enhanced for complexes 1 and 2 compared to their free D-A type ligand L1 , while those of complexes 3 and 4 were greatly decreased relative to their free ligand L2 , thus confirming that the smaller ligand (D-A type) displays a suitable Turn-ON fluorescence pair for two-photon fluorescence microscopy (2PFM). Firstly, the potential of simultaneously labeling a live cell plasma membrane and nucleus using complex 1 is demonstrated. In addition, live larval and adult zebrafish incubated with an optimal concentration of 1 demonstrated clear brain uptake. Lastly and importantly, using such a probe to visualize the blood-brain-barrier (BBB) capillary endothelial cells and penetrate the BBB into the central nervous system (CNS) intravenously in a mouse model is also explored.

We strategize to utilize the precursors of (imino)coumarin fluorophores to deliver novel reactive Cu(+) probes, where tris[(2-pyridyl)-methyl] amine (TPA) works as a reactive receptor towards Cu(+). To verify this strategy, CP1, a representative probe and relevant sensing behaviors towards Cu(+) are presented here. CP1 features good solubility and fast response for monitoring labile copper in aqueous solution and live cells. The sensing mechanism of CP1 is determined by HPLC titration and mass spectrometric analysis. The probe CP1 exhibits a 60-fold fluorescence enhancement and a detection limitation of 10.8 nM upon the detection of Cu(+). CP1 is further applied for imaging labile copper in live cells. This work provides a starting point for future development of Cu(+) probes, based on in situ formation of (imino)coumarin scaffolds, as well as their further investigations of copper signaling and biological events., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A new colorimetric and fluorogenic probe (RN3) based on rhodamine-B has been successfully designed and synthesized. It displays a selective response to Hg(2+) in the aqueous buffer solution over the other competing metals. Upon addition of Hg(2+), the solution of RN3 exhibits a 'naked eye' observable color change from colorless to red and an intensive fluorescence with about 105-fold enhancement. The changes in the color and fluorescence are ascribed to the ring-opening of spirolactam in rhodamine fluorophore, which is induced by a binding of the constructed receptor to Hg(2+) with the association and dissociation constants of 0.22 × 10(5) M(-1) and 25.2 μM, respectively. The Job's plot experiment determines a 1:1 binding stoichiometry between RN3 and Hg(2+). The resultant "turn-on" fluorescence in buffer solution, allows the application of a method to determine Hg(2+) levels in the range of 4.0-15.0 μM, with the limit of detection (LOD) calculated at 60.7 nM (3σ/slope). In addition, the fluorescence 'turn-off' and color 'fading-out' happen to the mixture of RN3-Hg(2+) by further addition of I(-) or S(2-). The reversible switching cycles of fluorescence intensity upon alternate additions of Hg(2+) and S(2-) demonstrate that RN3 can perform as an INHIBIT logic gate. Furthermore, the potential of RN3 as a fluorescent probe has been demonstrated for cellular imaging., (Copyright © 2016 Elsevier B.V. All rights reserved.)

It is still a challenge to obtain two-photon excited fluorescent bioimaging probes with intense emission, high photo-stability and low cytotoxicity. In the present work, four Zn(ii)-coordinated complexes (1-4) constructed from two novel D-A and D-π-A ligands (L 1 and L 2 ) are investigated both experimentally and theoretically, aiming to explore efficient two-photon probes for bioimaging. Molecular geometry optimization used for theoretical calculations is achieved using the crystallographic data. Notably, the results indicate that complexes 1 and 2 display enhanced two-photon absorption (2PA) cross sections compared to their corresponding D-A ligand (L 1 ). Furthermore, it was found that complex 1 has the advantages of moderate 2PA cross section in the near-infrared region, longer fluorescence lifetime, higher quantum yield, good biocompatibility and enhanced two-photon excited fluorescence. Therefore, complex 1 is evaluated as a bioimaging probe for in vitro imaging of HepG2 cells, in which it is observed under a two-photon scanning microscope that complex 1 exhibits effective co-staining with endoplasmic reticulum (ER) and nuclear membrane; as well as for in vivo imaging of zebrafish larva, in which it is observed that complex 1 exhibits specificity in the intestinal system.

Nanoparticles exhibiting bright near-infrared (NIR) fluorescence, T 1 - and T 2 -weighted MR were synthesized for specific tumor imaging. Clinically used Fe 3 O 4 nanoparticles exhibit an intrinsic dark signal (T 2 -weighted MRI), which sometimes misleads clinical diagnosis. Here, for the first time we integrated ultrasmall Fe 3 O 4 nanoparticles (2-3 nm) with an NIR emitting semiconducting polymer for both T 1 - and T 2 -weighted MRI as well as fluorescence imaging of tumors. Bio-functionalized multi-modality fluorescent magnetic nanoparticles (FMNPs) functionalized with folic acid exhibit bright fluorescence and high relaxation (r 1 = 7.008 mM -1 s -1 , r 2 = 26.788 mM -1 s -1 , r 2 /r 1 = 3.8). These FMNPs have a small average dynamic size of about 20 nm with low aggregation and long circulation time. In vitro studies revealed that FMNPs can serve as an effective fluorescent probe to achieve targeting images of human A549 lung cancer cells without obvious cytotoxicity. In vivo experimental results show that the FMNPs are able to preferentially accumulate in tumor tissues for specific fluorescence imaging, T 1 - and T 2 -weighted MRI.

A facile one-step Cu(i)-catalyzed "click" reaction, between a dansyl-azide and a propargyl-substituted rhodamine B hydrazide, is employed to fabricate a novel FRET ratiometric "off-on" fluorescent probe. The sensitive emission of the donor, a dansyl group, overlaps perfectly with the absorption of the acceptor, xanthene in the open-ring rhodamine. The proposed probe shows high selectivity towards Cu 2+ . The ratio of emission intensities at 568 and 540 nm (I 568 /I 540 ) exhibits a drastic 28-fold enhancement upon addition of Cu 2+ . The probe shows an excellent linear relationship between emission ratios and the concentrations of Cu 2+ from 10 to 50 μM, with a detection limit (S/N = 3) of 0.12 μM. The preliminary cellular studies demonstrated that the probe is cell membrane permeable and could be applied for ratiometric fluorescence imaging of intracellular Cu 2+ with almost no cytotoxicity. The ingenuity of the probe design is to construct a FRET donor-acceptor interconnector and a selective receptor simultaneously by "click" reaction. The strategy was verified to have great potential for developing novel FRET probes for Cu 2+ .

Uniform, highly water-dispersible and ultra-small Fe3O4 nanoparticles were synthesized via a modified one-step coprecipitation approach. The prepared Fe3O4 nanoparticles not only show good magnetic properties, long-term stability in a biological environment, but also exhibit good biocompatibility in cell viability and hemolysis assay. Due to the ultra-small sized and highly water-dispersibility, they exhibit excellent relaxivity properties, the 1.7 nm sized Fe3O4 nanoparticles reveal a low r2/r1 ratio of 2.03 (r1 = 8.20 mM(-1) s(-1), r2 = 16.67 mM(-1) s(-1)); and the 2.2 nm sized Fe3O4 nanoparticles also appear to have a low r2/r1 ratio of 4.65 (r1 = 6.15 mM(-1) s(-1), r2 = 28.62 mM(-1) s(-1)). This demonstrates that the proposed ultra-small Fe3O4 nanoparticles have great potential as a new type of T1 magnetic resonance imaging contrast agents. Especially, the 2.2 nm sized Fe3O4 nanoparticles, have a competitive r1 value and r2 value compared to commercial contrasting agents such as Gd-DTPA (r1 = 4.8 mM(-1) s (-1)), and SHU-555C (r2 = 69 mM(-1) s(-1)). In vitro and in vivo imaging experiments, show that the 2.2 nm sized Fe3O4 nanoparticles exhibit great contrast enhancement, long-term circulation, and low toxicity, which enable these ultra-small sized Fe3O4 nanoparticles to be promising as T1 and T2 dual contrast agents in clinical settings.

Water-dispersible and luminescent gadolinium oxide (GO) nanoparticles (NPs) were designed and synthesized for potential dual-modal biological imaging. They were obtained by capping gadolinium oxide nanoparticles with a fluorescent glycol-based conjugated carboxylate (HL). The obtained nanoparticles (GO-L) show long-term colloidal stability and intense blue fluorescence. In addition, L can sensitize the luminescence of europium(III) through the so-called antenna effect. Thus, to extend the spectral ranges of emission, europium was introduced into L-modified gadolinium oxide nanoparticles. The obtained EuIII-doped particles (Eu:GO-L) can provide visible red emission, which is more intensive than that without L capping. The average diameter of the monodisperse modified oxide cores is about 4 nm. The average hydrodynamic diameter of the L-modified nanoparticles was estimated to be about 13 nm. The nanoparticles show effective longitudinal water proton relaxivity. The relaxivity values obtained for GO-L and Eu:GO-L were r1=6.4 and 6.3 s−1 mM−1 with r2/r1 ratios close to unity at 1.4 T. Longitudinal proton relaxivities of these nanoparticles are higher than those of positive contrast agents based on gadolinium complexes such as Gd-DOTA, which are commonly used for clinical magnetic resonance imaging. Moreover, these particles are suitable for cellular imaging and show good biocompatibility.

Near-IR (NIR) emitting semiconducting polymer dots (Pdots) with ultrabright fluorescence have been prepared for specific cellular targeting. A series of π-conjugated polymers were synthesized to form water dispersible multicomponent Pdots by an ultrasonication-assisted co-precipitation method. By optimizing cascade energy transfer in Pdots, high-intensity NIR fluorescence ( φ = 0.32) with tunable excitations, large absorption-emission separation (up to 330 nm), and narrow emission bands (FWHM = 44 nm) have been achieved. Single-particle fluorescence imaging show that the as-prepared NIR Pdots were more than three times brighter than the commercially available Qdot705 with comparable sizes under identical conditions of excitation and detection. Because of the covalent introduction of carboxylic acid groups into polymer side chains, the bioconjugation between NIR-emitting Pdots and streptavidins can be readily completed via these functional groups on the surface of Pdots. Furthermore, through flow cytometry and confocal fluorescence microscopy the NIR-emitting Pdot-streptavidin conjugates proved that they could effectively label EpCAM receptors on the surface of MCF-7 cells, via specific binding between streptavidin and biotin.

Fluorescent semiconducting polymer dots (Pdots) have attracted great interest because of their superior characteristics as fluorescent probes, such as high fluorescence brightness, fast radiative rates, and excellent photostability. However, currently available Pdots generally exhibit broad emission spectra, which significantly limit their usefulness in many biological applications involving multiplex detections. Here, we describe the design and development of multicolor narrow emissive Pdots based on different boron dipyrromethene (BODIPY) units. BODIPY-containing semiconducting polymers emitting at multiple wavelengths were synthesized and used as precursors for preparing the Pdots, where intraparticle energy transfer led to highly bright, narrow emissions. The emission full width at half-maximum of the resulting Pdots varies from 40 to 55 nm, which is 1.5-2 times narrower than those of conventional semiconducting polymer dots. BODIPY 520 Pdots were about an order of magnitude brighter than commercial Qdot 525 under identical laser excitation conditions. Fluorescence imaging and flow cytometry experiments indicate that the narrow emissions from these bright Pdots are promising for multiplexed biological detections.

We have previously shown that gadolinium oxide (Gd(2)O(3)) nanoparticles are promising candidates to be used as contrast agents in magnetic resonance (MR) imaging applications. In this study, these nanoparticles were investigated in a cellular system, as possible probes for visualization and targeting intended for bioimaging applications. We evaluated the impact of the presence of Gd(2)O(3) nanoparticles on the production of reactive oxygen species (ROS) from human neutrophils, by means of luminol-dependent chemiluminescence. Three sets of Gd(2)O(3) nanoparticles were studied, i.e. as synthesized, dialyzed and both PEG-functionalized and dialyzed Gd(2)O(3) nanoparticles. In addition, neutrophil morphology was evaluated by fluorescent staining of the actin cytoskeleton and fluorescence microscopy. We show that surface modification of these nanoparticles with polyethylene glycol (PEG) is essential in order to increase their biocompatibility. We observed that the as synthesized nanoparticles markedly decreased the ROS production from neutrophils challenged with prey (opsonized yeast particles) compared to controls without nanoparticles. After functionalization and dialysis, more moderate inhibitory effects were observed at a corresponding concentration of gadolinium. At lower gadolinium concentration the response was similar to that of the control cells. We suggest that the diethylene glycol (DEG) present in the as synthesized nanoparticle preparation is responsible for the inhibitory effects on the neutrophil oxidative burst. Indeed, in the present study we also show that even a low concentration of DEG, 0.3%, severely inhibits neutrophil function. In summary, the low cellular response upon PEG-functionalized Gd(2)O(3) nanoparticle exposure indicates that these nanoparticles are promising candidates for MR-imaging purposes.

A method to prepare amyloid-like fibrils functionalized with magnetic nanoparticles has been developed. The amyloid-like fibrils are prepared in a two step procedure, where insulin and magnetic nanoparticles are mixed simply by grinding in the solid state, resulting in a water soluble hybrid material. When the hybrid material is heated in aqueous acid, the insulin/nanoparticle hybrid material self assembles to form amyloid-like fibrils incorporating the magnetic nanoparticles. This results in magnetically labeled amyloid-like fibrils which has been characterized by Transmission Electron Microscopy (TEM) and electron tomography. The influence of the aggregation process on proton relaxivity is investigated. The prepared materials have potential uses in a range of bio-imaging applications., (Copyright © 2012 Elsevier Inc. All rights reserved.)

ZnO nanostructured materials, such as films and nanoparticles, could provide a suitable platform for development of high performance biosensors due to their unique fundamental material properties. This paper reviews different preparation techniques of ZnO nanocrystals and material issues like wettability, biocompatibility and toxicity, which have an important relevance to biosensor functionality. Efforts are made to summarize and analyze existing results regarding surface modification and molecular attachments for successful biofunctionalization and understanding of the mechanisms involved. A section is devoted to implementations of tailored surfaces in biosensors. We end with conclusions on the feasibility of using ZnO nanocrystals for biosensing.

We report the self-assembly of stable nanoscale coordination polymers (NCPs), which exhibit temperature-controlled guest encapsulation and release, as well as an efficient light-harvesting property. NCPs are obtained by coordination-directed organization of pi-conjugated dicarboxylate (L1) and lanthanide metal ions Gd(III), Eu(III), and Yb(III) in a DMF system. Guest molecules trans-4-styryl-1-methylpyridiniumiodide (D1) and methylene blue (D2) can be encapsulated into NCPs, and the loading amounts can be controlled by changing reaction temperatures. Small angle X-ray diffraction (SAXRD) results reveal that the self-assembled discus-like NCPs exhibit long-range ordered structures, which remain unchanged after guest encapsulations. Experimental results reveal that the negatively charged local environment around the metal connector is the driving force for the encapsulation of cationic guests. The D1 molecules encapsulated in NCPs at 140 degrees C can be released gradually at room temperature in DMF. Guest-loaded NCPs exhibit efficient light harvesting with energy transfer from the framework to the guest D1 molecule, which is studied by photoluminescence and fluorescence lifetime decays. This coordination-directed encapsulation approach is general and should be extended to the fabrication of a wide range of multifunctional nanomaterials.

This study reports ZnO nanoparticles and thin film surface modification using a two-step functionalization strategy. A small silane molecule was used to build up a stabilizing layer and for conjugation of biotin (vitamin B7), as a specific tag. Biotin was chosen because it is a well-studied bioactive molecule with high affinity for avidin. ZnO nanoparticles were synthesized by electrochemical deposition under oxidizing condition, and ZnO films were prepared by plasma-enhanced metal-organic chemical vapor deposition. Both ZnO nanoparticles and ZnO thin films were surface modified by forming a (3-mercaptopropyl)trimethoxysilane (MPTS) layer followed by attachment of a biotin derivate. Iodoacetyl-PEG2-biotin molecule was coupled to the thiol unit in MPTS through a substitution reaction. Powder X-ray diffraction, transmission electron microscopy, X-ray photoemission electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine structure spectroscopy were used to investigate the as-synthesized and functionalized ZnO materials. The measurements showed highly crystalline materials in both cases with a ZnO nanoparticle diameter of about 5 nm and a grain size of about 45 nm for the as-grown ZnO thin films. The surface modification process resulted in coupling of silanes and biotin to both the ZnO nanoparticles and ZnO thin films. The two-step functionalization strategy has a high potential for specific targeting in bioimaging probes and for recognition studies in biosensing applications.

Recently, much attention has been given to the development of biofunctionalized nanoparticles with magnetic properties for novel biomedical imaging. Guided, smart, targeting nanoparticulate magnetic resonance imaging (MRI) contrast agents inducing high MRI signal will be valuable tools for future tissue specific imaging and investigation of molecular and cellular events. In this study, we report a new design of functionalized ultrasmall rare earth based nanoparticles to be used as a positive contrast agent in MRI. The relaxivity is compared to commercially available Gd based chelates. The synthesis, PEGylation, and dialysis of small (3-5 nm) gadolinium oxide (DEG-Gd(2)O(3)) nanoparticles are presented. The chemical and physical properties of the nanomaterial were investigated with Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, and dynamic light scattering. Neutrophil activation after exposure to this nanomaterial was studied by means of fluorescence microscopy. The proton relaxation times as a function of dialysis time and functionalization were measured at 1.5 T. A capping procedure introducing stabilizing properties was designed and verified, and the dialysis effects were evaluated. A higher proton relaxivity was obtained for as-synthesized diethylene glycol (DEG)-Gd(2)O(3) nanoparticles compared to commercial Gd-DTPA. A slight decrease of the relaxivity for as-synthesized DEG-Gd(2)O(3) nanoparticles as a function of dialysis time was observed. The results for functionalized nanoparticles showed a considerable relaxivity increase for particles dialyzed extensively with r(1) and r(2) values approximately 4 times the corresponding values for Gd-DTPA. The microscopy study showed that PEGylated nanoparticles do not activate neutrophils in contrast to uncapped Gd(2)O(3). Finally, the nanoparticles are equipped with Rhodamine to show that our PEGylated nanoparticles are available for further coupling chemistry, and thus prepared for targeting purposes. The long term goal is to design a powerful, directed contrast agent for MRI examinations with specific targeting possibilities and with properties inducing local contrast, that is, an extremely high MR signal at the cellular and molecular level.

There is a demand for more efficient and tissue-specific MRI contrast agents and recent developments involve the design of substances useful as molecular markers and magnetic tracers. In this study, nanoparticles of gadolinium oxide (Gd2O3) have been investigated for cell labeling and capacity to generate a positive contrast. THP-1, a monocytic cell line that is phagocytic, was used and results were compared with relaxivity of particles in cell culture medium (RPMI 1640). The results showed that Gd2O3-labeled cells have shorter T1 and T2 relaxation times compared with untreated cells. A prominent difference in signal intensity was observed, indicating that Gd2O3 nanoparticles can be used as a positive contrast agent for cell labeling. The r1 for cell samples was 4.1 and 3.6 s(-1) mm(-1) for cell culture medium. The r2 was 17.4 and 12.9 s(-1) mm(-1), respectively. For r1, there was no significant difference in relaxivity between particles in cells compared to particles in cell culture medium, (p(r1) = 0.36), but r2 was significantly different for the two different series (p(r2) = 0.02). Viability results indicate that THP-1 cells endure treatment with Gd2O3 nanoparticles for an extended period of time and it is therefore concluded that results in this study are based on viable cells., (Copyright 2008 John Wiley & Sons, Ltd.)

Electrochemical impedance spectroscopy was employed to explore the possibility of relating the permeation of electrolyte ions in omega-functionalized self-assembled monolayers to structural or polarity changes induced by interaction with metal ions. The monolayers were based on alkanethiols modified with a phosphorylated tyrosine analogue, which from previous work are known to drastically change their organization on gold surfaces upon interaction with aluminum and magnesium ions. The ion permeation was evaluated by using relatively low excitation frequencies, 1000 to 2 Hz, and quantified by an extra resistive component in the equivalent circuit (RSAM). The extent of ion permeation influenced by the dc potential, the electrolyte concentration, the functional group, and the thiol length were also investigated. It was, for example, found that RSAM decreased approximately 20% when the thiol organization collapsed and that RSAM increased approximately 4-5 times when the electrolyte concentration was decreased by 1 order of magnitude. Interesting observations were also made regarding the potential dependence of RSAM and the double layer capacitance. The evaluation of the ion permeation can be used to indirectly detect whether the organization of a SAM is influenced by, for example, electric fields or chemical and biological interactions. This analysis can be performed without addition of redox species, but is on the other hand complicated by the fact that other factors also influence the presence of ions within the monolayer. In addition, a second parallel RC process was obtained in some of the impedance spectra when using even lower frequencies, and its resistive component revealed different results compared to RSAM. Such data may be useful for the understanding of complex double layer phenomena at modified electrodes.

Pure and mixed monolayers of a synthetic peptide, GPR-i3n, derived from the third intracellular loop of the alpha2 adrenergic receptor and a shorter inactive oligopeptide, N-formyl-(Gly)3-(Cys) (called 3GC), were prepared on gold surfaces. The mixing ratio of the GPR-i3n and 3GC was used to control G-protein binding capability. The GPR-i3n peptide is specially designed for bovine G-protein selectivity and has been proven to have high affinity to G-proteins [Vahlberg, C.; Petoral, R. M., Jr.; Lindell, C.; Broo, K.; Uvdal, K. Langmuir 2006, 22 (17), 7260-7264]. Pure 3GC monolayers show very low protein adsorption capability. In this study, 3GC is chosen as a coadsorbent, with the aim to induce molecular conformational changes during monolayer formation to enhance G-protein adsorption. A full characterization of the mixed monolayers was done. The monolayer thickness and the mass-related surface coverage for both GPR-i3n and 3GC were investigated using radio labeling. The GPR-i3n was labeled by 125I-targeting tyrosine, and the activity was measured by using radioimmunoassay (RIA). The formation and chemical composition of GPR-i3n and 3GC monolayers were investigated using X-ray photoelectron spectroscopy, and it is shown that both GPR-i3n and 3GC bind chemically to the gold surface. The interaction between the mixed monolayers and G-proteins was investigated by means of real-time surface plasmon resonance. There is a higher protein binding capacity to the monolayer when the GPR-i3n peptide is intermixed with the 3GC coadsorbent, despite the fact that the 3GC itself has a very low G-protein binding capability. This supports a molecular reorientation at the surface, while 3GC is intermixed with GPR-i3n.

Phosphorylated tyrosine analogue molecules (pTyr-PT) were assembled onto gold substrates, and the resulting monolayers were used for metal ion interaction studies. The monolayers were characterized by X-ray photoelectron spectroscopy (XPS), infrared reflection-absorption spectroscopy (IRAS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), both prior to and after exposure to metal ions. XPS verified the elemental composition of the molecular adsorbate and the presence of metal ions coordinated to the phosphate groups. Both the angle-dependent XPS and IRAS results were consistent with the change in the structural orientation of the pTyr-PT monolayer upon exposure to metal ions. The differential capacitance of the monolayers upon coordination of the metal ions was evaluated using EIS. These metal ions were found to significantly change the capacitance of the pTyr-PT monolayers in contrast to the nonphosphorylated tyrosine analogue (TPT). CV results showed reduced electrochemical blocking capabilities of the phosphorylated analogue monolayer when exposed to metal ions, supporting the change in the structure of the monolayer observed by XPS and IRAS. The largest change in the structure and interfacial capacitance was observed for aluminum ions, compared to calcium, magnesium, and chromium ions. This type of monolayer shows an excellent capability to coordinate metal ions and has a high potential for use as sensing layers in biochip applications to monitor the presence of metal ions.

Objective: Nanosized materials of gadolinium oxide can provide high-contrast enhancement in magnetic resonance imaging (MRI). The objective of the present study was to investigate proton relaxation enhancement by ultrasmall (5 to 10 nm) Gd(2)O(3) nanocrystals., Materials and Methods: Gd(2)O(3) nanocrystals were synthesized by a colloidal method and capped with diethylene glycol (DEG). The oxidation state of Gd(2)O(3) was confirmed by X-ray photoelectron spectroscopy. Proton relaxation times were measured with a 1.5-T MRI scanner. The measurements were performed in aqueous solutions and cell culture medium (RPMI)., Results: Results showed a considerable relaxivity increase for the Gd(2)O(3)-DEG particles compared to Gd-DTPA. Both T (1) and T (2) relaxivities in the presence of Gd(2)O(3)-DEG particles were approximately twice the corresponding values for Gd-DTPA in aqueous solution and even larger in RPMI. Higher signal intensity at low concentrations was predicted for the nanoparticle solutions, using experimental data to simulate a T(1)-weighted spin echo sequence., Conclusion: The study indicates the possibility of obtaining at least doubled relaxivity compared to Gd-DTPA using Gd(2)O(3)-DEG nanocrystals as contrast agent. The high T (1) relaxation rate at low concentrations of Gd(2)O(3) nanoparticles is very promising for future studies of contrast agents based on gadolinium-containing nanocrystals.

The affinity of alpha(2A)-adrenergic receptor (alpha(2A)-AR) derived peptide adsorbates for the functional bovine brain G-protein is studied in the search for the minimum sequence recognition. Three short peptides (GPR-i2c, GPR-i3n, and GPR-i3c) are designed to mimic the second and third intracellular loops of the receptor. X-ray photoelectron spectroscopy is used to study the chemical composition of the peptides and the binding strength to the surfaces. Chemisorption of the peptides to the gold substrates is observed. Infrared spectroscopy is used to study the characteristic absorption bands of the peptides. The presence of peptides on the surfaces is verified by prominent amide I and amide II bands. The interaction between the peptides and the G-protein is studied with surface plasmon resonance. It is shown that GPR-i3n has the highest affinity for the G-protein. Equilibrium analysis of the binding shows that the G-protein keeps its native conformation when interacting with GPR-i3c, but during the interaction with GPR-i2c and GPR-i3n the conformation of G-protein is changed, leading to the formation of aggregates and/or multilayers.

A biomimetic model system based on long-chain alkanethiols tailored with serine, threonine and tyrosine side-chain groups is created as a platform for the study of phosphorylated amino acids. The phosphorylated analogues are synthesized with protective tert-butyl groups that after assembly on thin polycrystalline gold films are removed in an acidic deprotection solution to form the corresponding phosphate self-assembled monolayers (SAMs). The SAMs are thoroughly characterized with null ellipsometry, contact angle goniometry, infrared reflection-absorption spectroscopy and X-ray photoelectron spectroscopy. The assembly and the subsequent deprotection process are optimized with respect to molecular orientation and chain conformation by varying the incubation time and the exposure time to the deprotection solution. The high quality of the generated SAMs suggests that the present assembly/deprotection approach is an attractive alternative when traditional synthetic routes become demanding because of solubility problems.

Monolayers of tert-butyl carbamate-terminated thiol were formed by adsorption of the molecules onto polycrystalline gold substrate. The adsorbates were studied using techniques as X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), and infrared reflection-absorption spectroscopy (IRAS). The results provide the electronic structure, composition, characteristic fingerprint, and orientation of the molecular adsorbate. XPS verified that the thiolate group is chemically bonded to the gold surface and that a complete chemisorption of the molecule occurs. Elemental depth profiling by varying the excitation energy in XPS supports the angle-dependent XPS results. Both techniques showed that the tert-butyl group is oriented away from the gold surface. A nearly parallel orientation of the carbonyl group relative to the gold surface is deduced from the IRAS results. The main molecular axis is estimated to have an average tilt angle of about 38 degrees relative to the gold surface normal on the basis of the NEXAFS results. Cyclic voltammetry indicates a less blocking capability of the adsorbates. Overall, the molecules are oriented in an upright manner with indications of presence of pinholes and/or defects possibly due to steric hindrance of the bulky tert-butyl group. This molecular system is envisioned to be of use for surface-based organic synthesis on gold substrates.

Nanocrystals of Gd2O3 have been prepared by various methods, using, e.g., trioctylphosphine oxide (TOPO), diethylene glycol (DEG) or glycine. The crystalline particles were of sizes 5 to 15 nm. Different carboxylic acids, e.g., oleic acid or citric acid, were adsorbed onto the surface of the particles made with DEG. IR measurements show that the molecules coordinate to the Gd2O3 surface via the carboxylate group in a bidentate or bridging manner. The organic-acid/particle complexes were characterised by XRPD, TEM, FTIR, Raman, and XPS.