Search

Rationale: Neuromyelitis optica spectrum disorders (NMOSD) is a rare autoimmune disease predominantly involving optic nerves and spinal cord, and possible comorbidities including syndrome of inappropriate antidiuretic hormone secretion or urinary complication. We reported a young girl diagnosed with NMOSD presented with refractory hyponatremia, acute urine retention, and general weakness. Clinical symptoms improved gradually after receiving intravenous immunoglobulin, high-dose methylprednisolone, and plasmapheresis. NMOSD should be kept in mind in adolescence with acute urine retention, intermittent fever, and hyponatremia., Patient Concerns: A 15-year-old girl admitted to our hospital due to no urination for 2 days., Diagnosis: Aquaporin-4 antibodies were detected showing positive both in serum and cerebrospinal fluid. Long transverse myelitis in cervical and thoracic spinal cord and optic neuritis was revealed in magnetic resonance imaging., Interventions: Intravenous immunoglobulin 2 g/kg was infused totally in 4 days, and methylprednisolone pulse therapy was subsequently followed in 5 days; followed by 5 courses of plasmapheresis a week later., Outcomes: Her muscle power, syndrome of inappropriate antidiuretic hormone secretion condition, and urinary function were all improved after immune-modulated treatment course; NMOSD relapsed twice within the first year after diagnosis, however no relapse of NMOSD in the subsequent 1 year., Lessons: To the best of our knowledge, this was the first childhood case of NMO accompanied by refractory hyponatremia in the reported literature. In childhood cases presenting with refractory hyponatremia and limb weakness, NMO or NMOSD should be considered possible diagnoses despite their rarity in pediatric cases., Competing Interests: The authors have no conflicts of interest to disclose., (Copyright © 2021 the Author(s). Published by Wolters Kluwer Health, Inc.)

We have fabricated a photodetector based on (CH 3 NH 3 ) 3 Sb 2 Br 9 (MA 3 Sb 2 Br 9 ) lead-free perovskite-like single crystal, which plays an important role in the optoelectronic characteristics of the photodetector as a perovskite-like photosensitive layer. Here, MA 3 Sb 2 Br 9 single crystals were synthesized by an inverse temperature crystallization process with a precursor solution at three different growth temperatures, 60 °C, 80 °C, and 100 °C. As a result, a MA 3 Sb 2 Br 9 single crystal with an optimum growth temperature of 60 °C presented a low trap density of 2.63 × 10 11 cm -3 , a high charge carrier mobility of 0.75 cm 2 V -1 s -1 , and excellent crystal structure and optical absorption properties. This MA 3 Sb 2 Br 9 perovskite-like photodetector displayed a low dark current of 8.09 × 10 -9 A, high responsivity of 0.113 A W -1 , and high detectivity of 4.32 × 10 11 Jones.

We report a catalytic cross-coupling process between aryl (pseudo)halides and boron-based acyl anion equivalents. This mode of acylboronate reactivity represents polarity reversal, which is supported by the observation of tetracoordinated boronate and acyl palladium(II) species by 11 B, 31 P NMR, and mass spectrometry. A broad scope of aliphatic and aromatic acylboronates has been examined, as well as a variety of aryl (pseudo)halides.

We proposed a novel cryptographic imaging scheme that is the combination of optical encryption and computational decryption. To prevent personal privacy from being spied upon amid the imaging formation process, in this study we applied a coded mask to optically encrypt the scene and utilized the deep neural network for computational decryption. For encryption, the sensor recorded a new representation of the original signal, not being distinguishable by humans on purpose. For decryption, we successfully reconstructed the image with the mean squared error equal to 0.028, and 100% for the classification through the Japanese Female Facial Expression dataset. By means of the feature visualization, we found that the coded mask served as a linear operator to synthesize the spatial fidelity of the original scene, but kept the features for the post-recognition process. We believe the proposed framework can inspire more possibilities for the unconventional imaging system.

The application of carboxy-MIDA-boronate (MIDA=N-methyliminodiacetic acid) as an in situ CO surrogate for various palladium-catalyzed transformations is described. Carboxy-MIDA-boronate was previously shown to be a bench-stable boron-containing building block for the synthesis of borylated heterocycles. The present study demonstrates that, in addition to its utility as a precursor to heterocycle synthesis, carboxy-MIDA-boronate is an excellent in situ CO surrogate that is tolerant of reactive functionalities such as amines, alcohols, and carbon-based nucleophiles. Its wide functional-group compatibility is highlighted in the palladium-catalyzed aminocarbonylation, alkoxycarbonylation, carbonylative Sonogashira coupling, and carbonylative Suzuki-Miyaura coupling of aryl halides. A variety of amides, esters, (hetero)aromatic ynones, and bis(hetero)aryl ketones were synthesized in good-to-excellent yields in a one-pot fashion., (© 2020 Wiley-VCH GmbH.)

Herein we report that coordinative hemilability allows the MIDA ( N -methyliminodiacetic acid) nitrogen to behave as a nucleophile and intramolecularly intercept palladium π-allyl intermediates. A mechanistic investigation indicates that this rearrangement proceeds through an S N 2-like displacement at tetrasubstituted boron to furnish novel DABN boronates. Oxidative addition into the N-C bond of the DABN scaffold furnishes borylated π-allyl intermediates that can then be trapped with a variety of nucleophiles, including in a three-component coupling.

This work presents a method for obtaining a color-converted red light source through a combination of a blue GaN light-emitting diode and a red fluorescent color conversion film of a perovskite CsPbI 3 /TOPO composite. High-quality CsPbI 3 quantum dots (QDs) were prepared using the hot-injection method. The colloidal QD solutions were mixed with different ratios of trioctylphosphine oxide (TOPO) to form nanowires. The color conversion films prepared by the mixed ultraviolet resin and colloidal solutions were coated on blue LEDs. The optical and electrical properties of the devices were measured and analyzed at an injection current of 50 mA; it was observed that the strongest red light intensity was 93.1 cd/m 2 and the external quantum efficiency was 5.7% at a wavelength of approximately 708 nm when CsPbI 3 /TOPO was 1:0.35.

In this paper, a thermally crosslinkable 9,9-Bis[4-[(4-ethenylphenyl)methoxy]phenyl]-N2,N7-di-1-naphthalenyl-N2,N7-diphenyl-9H-fluorene-2,7-diamine (VB-FNPD) film served as the hole transporting layer (HTL) of perovskite CsPbBr 3 quantum-dot light-emitting diodes (QD-LEDs) was investigated and reported. The VB-FNPD film crosslinked at various temperatures in the range of 100~230 °C followed by a spin-coating process to improve their chemical bonds in an attempt to resist the erosion from the organic solvent in the remaining fabrication process. It is shown that the device with VB-FNPD HTL crosslinking at 170 °C has the highest luminance of 7702 cd/m 2 , the maximum current density (J) of 41.98 mA/cm 2 , the maximum current efficiency (CE) of 5.45 Cd/A, and the maximum external quantum efficiency (EQE) of 1.64%. Our results confirm that the proposed thermally crosslinkable VB-FNPD is a candidate for the HTL of QD-LEDs.

Air-stable secondary phosphine oxides (SPOs) are readily formed from diazaphospholene bromides. In the presence of pinacolborane, these SPOs are transformed into catalytically active diazaphospholene hydrides. A silyl triflate transforms the SPOs into phosphenium triflates. The use of diazaphospholene SPOs as reduction reaction precatalysts was validated by imine reduction, conjugate reduction, pyridine hydroboration, and asymmetric reduction.

The synthesis and applications of carboxy-MIDA-boronate, a novel C1 building block, are described. This molecule is accessible via a ruthenium tetraoxide-mediated cleavage of commercially available ethynyl-MIDA-boronate. In the course of this study, carboxy-MIDA-boronate was found to possess ambident reactivity towards nucleophiles. Carboxylic acid derivatization produces a broad range of previously unknown carbamoyl-, oxycarbo- and thiocarboboronates. Carboxy-MIDA-boronate and its derivatives undergo condensations to access borylated heterocycles with boron at positions that are difficult to access using alternate methods. The resulting heterocycles participate in the Suzuki-Miyaura cross-coupling reaction, enabling entry into diverse bis(heteroaryl) motifs. The carbon monoxide-releasing capacity of carboxy-MIDA-boronate was also examined and applied in palladium-catalyzed carbonylation., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The first use of phosphenium cations in asymmetric catalysis is reported. A diazaphosphenium triflate, prepared in two or three steps on a multigram scale from commercially available materials, catalyzes the hydroboration or hydrosilylation of cyclic imines with enantiomeric ratios of up to 97:3. Catalyst loadings are as low as 0.2 mol %. Twenty-two aryl/heteroaryl pyrrolidines and piperidines were prepared using this method. Imines containing functional groups such as thiophenes or pyridyl rings that can challenge transition-metal catalysts were reduced employing these systems.

Background: Congenital TORCH (toxoplasmosis, other viruses [varicella-zoster virus, VZV, etc.], rubella, cytomegalovirus [CMV], Herpes simplex virus [HSV]) infections are major causes of prenatal, perinatal, and postnatal morbidity and mortality. Although treatment or prevention strategies are available for these pathogens, all drugs may not be safe during the pregnancy. The aim of this study is to measure the antibodies (Abs) concentration in the intravenous immunoglobulin (IVIG) preparation to evaluate the therapeutic potential for TORCH infection., Methods: We tested the only one commercial IVIG preparation from Taiwanese for the presence of Abs against Toxoplasma gondii, VZV, Epstein-Barr virus (EBV), measles, mumps, rubella, CMV, HSV type 1 (HSV-1), and HSV type 2 (HSV-2) by using enzyme-linked immunosorbent assay or chemiluminescent microparticle immunoassay., Results: In our study, the median level (range) of anti-CMV immunoglobulin G (IgG) is > 250 (All > 250) (arbitrary unit, AU)/mL, anti-EBV > 200 (All > 200) (relative unit, RU)/mL, anti-HSV > 200 (152.75 to >200) RU/mL, anti-VZV > 5000 (All > 5000) IU/L, anti-measles > 5000 (All > 5000) IU/L, anti-mumps > 200 (156.5 to > 200) RU/mL, anti-rubella 209.8 IU/mL (192.7 to 238.5), and anti-Toxoplasma is 14.05 (12.3 to 16) IU/mL. There was not any immunoglobulin M (IgM) against HSV, VZV, mumps, measles, rubella, CMV, EBV, and Toxoplasma in the "Taiwan Blood Services Foundation" IVIG preparations., Conclusion: There was high activity against T. gondii, VZV, EBV, measles, mumps, rubella, CMV, HSV-1, and HSV-2 in all IVIG batches. Further investigation is warranted to confirm the efficacy of IVIG from Taiwanese for congenital TORCH infections.

This study proposes a novel direct-lit mini-chip-scale packaged light-emitting diode (mini-CSPLED) backlight unit (BLU) that used quantum dot (QD) film, diffusion plate, and two prism films to improve brightness uniformity. Three different luminous intensity units, 120° mini-CSPLED, 150° mini-CSPLED, and 180° mini-CSPLED with different emission angle structures were fabricated using a CSP process. In terms of component characteristics, although the 180° mini-CSPLED light output power is about loss 4% (at 10 mA) compared with 150° mini-CSPLED, it has a large emission angle that forms a planar light source that contributes to improving the BLU brightness uniformity and reduced quantity of LEDs at the same area. In terms of BLU analysis, the blue mini-CSPLEDs with different emission angles excite the different QD film thicknesses; the chromaticity coordinates conversion to the white light region. The BLU brightness increases as the QD film thickness increases from 60, 90, and 150 μm. This result can achieve a brightness uniformity of 86% in a 180° mini-CSPLED BLU + 150-μm-thick QD films as compared to the 120° mini-CSPLED BLU and 150° mini-CSPLED BLU.

The poor stability of CsPbX₃ quantum dots (QDs-CsPbX₃) under wet conditions is still considered to be a key issue. In order to overcome this problem, this study presents a high molecular weight polymer matrix (polymethylmethacrylate, PMMA) incorporated into the QDs-CsPbBr₃ to improve its stability and maintain its excellent optical properties. In this study, the Cs₂CO₃, PbO, Tetrabutylammonium Bromide (TOAB) powder, oleic acid, and toluene solvent were uniformly mixed and purified to prepare high-quality QDs powders. Then, hexane was used as a dispersing agent for the QD powder to complete the perovskite QDs-CsPbBr₃ solution. Finally, a solution with different proportions of quantum dots CsPbBr₃ and PMMA was prepared and discussed. In the preparation of thin films, firstly, a thin film with the structure of glass/QD-CsPbBr₃/PMMA was fabricated in a glove box using a well-developed QDs-CsPbBr₃ solution by changing the ratio of CsPbBr₃:PMMA. The material analysis of QDs-CsPbBr₃ thin films was performed with photoluminescence (PL), transmittance, absorbance, and transmission electron microscopy (TEM). The structures and morphologies were further examined to study the effect of doped PMMA on perovskite QDs-CsPbBr₃.

The capability of landing on previously unvisited areas is a fundamental challenge for an unmanned aerial vehicle (UAV). In this paper, we developed a vision-based motion estimation as an aid to improve landing performance. As an alternative to the common scenarios accompanying by external infrastructures or well-defined marker, the proposed hybrid framework can successfully land on a new area without any prior information about guiding marks. The implementation was based on the optical flow technique associated with a multi-scale strategy to overcome the decreasing field-of-view during the UAV descending. Compared with a commercial Global Positioning System (GPS) through a sequence of flight trials, the vision-aided scheme can effectively minimize the possible sensing error, thus, leading to a more accurate result. Moreover, this work has potential to integrate the fast-growing image learning process and yields more practical versatility for UAV applications in the future.

Rheumatoid arthritis (RA) is a chronic, inflammatory autoimmune disease of unknown etiology. It is characterized by the presence of rheumatoid factor and anticitrullinated peptide antibodies. The orchestra of the inflammatory process among various immune cells, cytokines, chemokines, proteases, matrix metalloproteinases (MMPs), and reactive oxidative stress play critical immunopathologic roles in the inflammatory cascade of the joint environment, leading to clinical impairment and RA. With the growing understanding of the immunopathogenic mechanisms, increasingly novel marked and potential biologic agents have merged for the treatment of RA in recent years. In this review, we focus on the current understanding of pathogenic mechanisms, highlight novel biologic disease-modifying antirheumatic drugs (DMRADs), targeted synthetic DMRADs, and immune-modulating agents, and identify the applicable immune-mediated therapeutic strategies of the near future. In conclusion, new therapeutic approaches are emerging through a better understanding of the immunopathophysiology of RA, which is improving disease outcomes better than ever.

We describe a method to enhance power conversion efficiency (PCE) of MAPbI₃ perovskite solar cell by inserting a FAPbX₃ perovskite quantum dots (QD-FAPbX₃) layer. The MAPbI₃ and QD-FAPbX₃ layers were prepared using a simple, rapid spin-coating method in a nitrogen-filled glove box. The solar cell structure consists of ITO/PEDOT:PSS/MAPbI₃/QD-FAPbX₃/C 60 /Ag, where PEDOT:PSS, MAPbI₃, QD-FAPbX₃, and C 60 were used as the hole transport layer, light-absorbing layer, absorption enhance layer, and electron transport layer, respectively. The MAPbI₃/QD-FAPbX₃ solar cells exhibit a PCE of 7.59%, an open circuit voltage (Voc) of 0.9 V, a short-circuit current density (Jsc) of 17.4 mA/cm², and a fill factor (FF) of 48.6%, respectively.

In conventional emitting devices, the mobility of electron is much higher than that of hole, which increases the non-recombination rate. To generate slow electrons, we demonstrate an electron retarding n-electrode (ERN) on the n-GaN layer of InGaN blue light emitting diode (LED), making more efficient radiation emission. Transparent conductive oxides are estimated to be more suitable for ERN materials. However, for ERN materials used in InGaN LEDs, three requirements should be satisfied, i.e., Ohmic contact to n-GaN, dilute magnetic doping, and good electrical conductivity. The pulsed-laser deposited cobalt-doped ZnO film prepared at 400 °C was chosen as the ERN. The electron retarding of 120-nm-thick ERN/n-GaN reached 19.9% compared to the n-GaN. The output powers (@350 mA) of LEDs with and without the ERN were 246.7 and 212.9 mW, while their wall-plug efficiencies were 18.2% and 15.1%, respectively. Moreover, owing to the efficient filling of electrons in the quantum wells by inserting the ERN, the bandgap of quantum wells was enlarged, inducing the blue-shift in the emission wavelength of LED. The slow electron generated from the ERN technique paves the way to solve the problem of large difference between electron and hole velocities and improve the optoelectronic performance of emitting devices.

In this study, we maneuvered a dual-band spectral imaging system to capture an iridal image from a cosmetic-contact-lens-wearing subject. By using the independent component analysis to separate individual spectral primitives, we successfully distinguished the natural iris texture from the cosmetic contact lens (CCL) pattern, and restored the genuine iris patterns from the CCL-polluted image. Based on a database containing 200 test image pairs from 20 CCL-wearing subjects as the proof of concept, the recognition accuracy (False Rejection Rate: FRR) was improved from FRR = 10.52% to FRR = 0.57% with the proposed ICA anti-spoofing scheme., Competing Interests: The authors declare no conflict of interest.

The first use of diazaphospholenes as chiral catalysts has been demonstrated with enantioselective imine hydroboration. A chiral diazaphospholene prepared in a simple three-step synthesis from commercial materials has been shown to achieve the highest enantioselectivity for the hydroboration of alkyl imines with pinacolborane reported to date. Enantiomer ratios of up to 88:12 were obtained with low (2 mol %) catalyst loadings. Twenty examples of asymmetric reduction employing this main-group catalysis protocol, including the synthesis of the pharmaceuticals ent-rasagiline and fendiline, are shown., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The synthesis and study of the catalytic activity of 1,2,4,3-triazaphospholenes (TAPs) is reported. TAPs represent a more modular scaffold than previously reported diazaphospholenes. TAP halides were shown to catalyze the 1,2 hydroboration of 19 imines, and three α,β unsaturated aldehydes with pinacolborane, including examples that did not undergo hydroboration by previously reported diazaphospholene systems. DFT calculations support a mechanism where a triazaphospholene cation interacts with the substrate, a mechanism distinct from diazaphospholene catalyzed hydroborations.

The first examples of 1,3,2-diazaphospholene-catalyzed imine reduction and conjugate reduction reactions are reported. This approach employs readily synthesized alkoxydiazaphospholene precatalysts that can be handled in open air. Reduction of substrates containing Lewis basic functionality, isolated unsaturation, and protic functional groups was accomplished. The synthetic utility of this approach is demonstrated by the synthesis of the important antiparkinson medicine rasagiline and the natural product zingerone., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Introduction: Far-Forward Damage Control Laparotomies (DCLs) might provide direct-compression of visceral hemorrhage, however, suturing is a limiting factor, especially for non-physicians. We thus compared abbreviated skin closures comparing skin-suture (SS) versus wound-clamp (WC), on-board a research aircraft in weightlessness (0g) and normal gravity (1g)., Methods: Surgeons conducted DCLs on a surgical-simulator; onboard the hangered-aircraft (1g), or during parabolic flight (0g), randomized to either WC or SS., Results: Ten surgeons participated. Two (40%) surgeons randomized to suture in 0g were incapacitated with motion-sickness, and none were able to close in either 1 or 0g. With WC, two completely closed in 1g as did three in 0g, despite having longer incisions (p = 0.016). Overall skin-closure with WC was significantly greater in both 1g (p = 0.016) and 0g (p = 0.008)., Conclusions: WC was more effective in 1g and particularly 0g. Future studies should address the utility of abbreviated WC abdominal closure to facilitate potential Far-Forward DCL., Trial Registration: ID ISRCTN/77929274., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Iris recognition has gained increasing popularity over the last few decades; however, the stand-off distance in a conventional iris recognition system is too short, which limits its application. In this paper, we propose a novel hardware-software hybrid method to increase the stand-off distance in an iris recognition system. When designing the system hardware, we use an optimized wavefront coding technique to extend the depth of field. To compensate for the blurring of the image caused by wavefront coding, on the software side, the proposed system uses a local patch-based super-resolution method to restore the blurred image to its clear version. The collaborative effect of the new hardware design and software post-processing showed great potential in our experiment. The experimental results showed that such improvement cannot be achieved by using a hardware-or software-only design. The proposed system can increase the capture volume of a conventional iris recognition system by three times and maintain the system's high recognition rate.

For many practical applications of image sensors, how to extend the depth-of-field (DoF) is an important research topic; if successfully implemented, it could be beneficial in various applications, from photography to biometrics. In this work, we want to examine the feasibility and practicability of a well-known "extended DoF" (EDoF) technique, or "wavefront coding," by building real-time long-range iris recognition and performing large-scale iris recognition. The key to the success of long-range iris recognition includes long DoF and image quality invariance toward various object distance, which is strict and harsh enough to test the practicality and feasibility of EDoF-empowered image sensors. Besides image sensor modification, we also explored the possibility of varying enrollment/testing pairs. With 512 iris images from 32 Asian people as the database, 400-mm focal length and F/6.3 optics over 3 m working distance, our results prove that a sophisticated coding design scheme plus homogeneous enrollment/testing setups can effectively overcome the blurring caused by phase modulation and omit Wiener-based restoration. In our experiments, which are based on 3328 iris images in total, the EDoF factor can achieve a result 3.71 times better than the original system without a loss of recognition accuracy., Competing Interests: The authors declare no conflict of interest.

A Ge 67 Cu 33 (16 nm) layer and a Ge (3 nm)/Ge 67 Cu 33 (16 nm) bilayer were grown by sputtering at room temperature and used as the recording films for write-once blue laser media. In comparison to the crystallization temperature of Ge in a GeCu film (380.7 °C-405.1 °C), the crystallization temperature of Ge in a Ge/GeCu bilayer could be further decreased to 333.7 °C-382.8 °C. The activation energies of Ge crystallization were 3.51 eV ± 0.05 eV and 1.50 eV ± 0.04 eV for the GeCu and the Ge/GeCu films, respectively, indicating that the Ge/GeCu bilayer possesses a higher feasibility in high-speed optical recording applications. Moreover, the lower activation energy would lead to a larger grain size of Ge crystallization in the Ge/GeCu bilayer after the annealing process. Between the as-deposited and the annealed states, the optical contrasts (@ 405 nm) of the GeCu and the Ge/GeCu films were 26.0% and 47.5%, respectively. This reveals that the Ge/GeCu bilayer is more suitable for the recording film of a write-once blu-ray disc (BD-R) in comparison with the GeCu film. Based on the dynamic tests performed for 2× and 4× recording speeds, the optimum jitter values of the BD-R with the Ge/GeCu recording film were 7.4% at 6.3 mW and 7.6% at 8.6 mW, respectively.

Flexible InGaN-based green light emitting diodes (LEDs) were fabricated by transferring epilayer to a flexible polyimide substrate with laser lift-off (LLO) and double-transfer technologies. We present a method of increasing light output power in flexible LEDs without modifying their epitaxial layers. These improvements are achieved by reducing the quantum-confined Stark effect by reducing piezoelectric polarization that results from compressive stress in the GaN epilayer. The compressive stress is relaxed due to the external stress induced by increasing bending displacement of flexible substrate. The light output power of the flexible LED at an injection current of 150 mA is increased by approximately 42.2%, as the external bending went to the case of effective length of 15 mm. The experimental results demonstrated that applying external tensile stress effectively compensates for the compressive strain and changes the piezoelectric field in the InGaN/GaN MQWs region, thereby increases the probability of radiative recombination.

In this paper, we proposed a methodology to optimize the parametric window of a liquid crystal display (LCD) system, whose visual performance was deteriorated by the pixel moiré arising in between multiple periodic structures. Conventional analysis and minimization of moiré patterns are limited by few parameters. With the proposed image-based particle swarm optimization (PSO), we enable a multivariable optimization at the same time. A series of experiments was conducted to validate the methodology. Due to its versatility, the proposed technique will certainly have a promising impact on the fast optimization in LCD design with more complex configuration.

Current human fertilization in vitro (IVF) bypasses the female oviduct and manually inseminates, fertilizes and cultivates embryos in a static microdrop containing appropriate chemical compounds. A microfluidic microchannel system for IVF is considered to provide an improved in-vivo-mimicking environment to enhance the development in a culture system for an embryo before implantation. We demonstrate a novel digitalized microfluidic device powered with electrowetting on a dielectric (EWOD) to culture an embryo in vitro in a single droplet in a microfluidic environment to mimic the environment in vivo for development of the embryo and to culture the embryos with good development and live births. Our results show that the dynamic culture powered with EWOD can manipulate a single droplet containing one mouse embryo and culture to the blastocyst stage. The rate of embryo cleavage to a hatching blastocyst with a dynamic culture is significantly greater than that with a traditional static culture (p<0.05). The EWOD chip enhances the culture of mouse embryos in a dynamic environment. To test the reproductive outcome of the embryos collected from an EWOD chip as a culture system, we transferred embryos to pseudo-pregnant female mice and produced live births. These results demonstrate that an EWOD-based microfluidic device is capable of culturing mammalian embryos in a microfluidic biological manner, presaging future clinical application.

We show that the propagating modes in a strongly-guided chiral one-way photonic crystal are not backscattering-immune even though they are indeed insensitive to many kinds of scatters. Since these modes are not protected by the nonreciprocity, the backscattering does occur under certain circumstances. We use a perturbative method to derive criteria for the prominent backscattering in such chiral structures. From both our theory and numerical examinations, we find that the amount of backscattering critically depends on the symmetry of scatters. Additionally, for these chiral photonic modes, disturbances at the most intense parts of field profiles do not necessarily lead to the most effective backscattering.

We fabricated a phosphor-conversion white light emitting diode (PC-WLED) using a thin-film flip-chip GaN LED with a roughened u-GaN surface (TFFC-SR-LED) that emits blue light at 450 nm wavelength with a conformal phosphor coating that converts the blue light into yellow light. It was found that the TFFC-SR-LED with the thin-film substrate removal process and surface roughening exhibits a power enhancement of 16.1% when compared with the TFFC-LED without a sapphire substrate. When a TFFC-SR-LED with phosphors on a Cu-metal packaging-base (TFFC-SR-Cu-WLED) was operated at a forward-bias current of 350 mA, luminous flux and luminous efficacy were increased by 17.8 and 11.9%, compared to a TFFC-SR-LED on a Cup-shaped packaging-base (TFFC-SR-Cup-WLED). The angular correlated color temperature (CCT) deviation of a TFFC-SR-Cu-WLED reaches 77 K in the range of -70° to + 70° when the average CCT of white LEDs is around 4300 K. Consequently, the TFFC-SR-LED in a conformal coating phosphor structure on a Cu packaging-base could not only increase the luminous flux output, but also improve the angular-dependent CCT uniformity, thereby reducing the yellow ring effect.

We theoretically analyze nanowire-based hybrid plasmonic nanocavities on thin substrates at visible wavelengths. In the presence of thin suspended substrates, the hybrid plasmonic modes, formed by the coupling between a metal nanowire and a dielectric nanowire with optical gain, exhibit negligible substrate-mediated characteristics and overlap better with the gain region. Consequently, the confinement factor of the guided hybrid modes is enhanced by more than 42%. However, the presence of significant mirror loss remains the main challenge to lasing. By adding silver coatings with a sufficient thickness range on the two end facets, we show that the reflectivity is substantially enhanced to above 50%. For a coating thickness of 50 nm and cavity length of about 4 μm, the quality factor is above 100.

The characteristics of high-voltage light-emitting diodes (HVLEDs) consisting of a 64-cell LED array were investigated by employing various LED structures. Two types of HVLED were examined: a standard HVLED with a single roughened indium tin oxide (ITO) surface grown on a sapphire substrate and a thin-film HVLED (TF-HVLED) with a roughened n-GaN and ITO double side transferred to a mirror/silicon substrate. At an injection current of 24 mA, the output powers of the HVLEDs fabricated using a sapphire substrate and those fabricated using a mirror/silicon substrate were 170 and 216 mW, respectively. Because the TF-HVLED exhibited improved thermal dissipation and light extraction, it produced a greater output power than the HVLED fabricated using the sapphire substrate did.

Breast cancer is one of the most common origins of metastatic lesions in the central nervous system. Many patients with a breast cancer and concurrent brain tumor(s) were diagnosed to have a metastatic lesion or lesions in the brain, based exclusively on their image findings without further pathologic verification, and received radiotherapy alone thereafter. It is, however, possible that a different pathology such as primary brain malignancy, which actually warrants a specific treatment modality, may occur in such patients with an already known malignancy. We, herein, reported a 61-year-old female patient who suffered from an anaplastic oligodendroglioma 1 year after her diagnosis of breast cancer. Demographic data, characteristic imaging findings, treatment, and outcome of the patient were discussed., (Copyright © 2012. Published by Elsevier B.V.)

A high-performance flip-chip light-emitting diode (FCLED) with a Ni/Ag metallic film as high reflectivity mirror (92.67%) of p-type electrode was successfully fabricated. The effect of geometric electrode patterns on the blue InGaN/GaN LEDs was investigated and analyzed qualitatively its current spreading in the active region. With different electrode patterns, these devices were experimented and simulated by simple electrical circuits in order to confirm its current-voltage characteristics and light emission pattern. It was found that the forward voltages of these FCLEDs were about 3.6 V (@350 mA). The light output power of FCLEDs with circle-round type electrode was 368 mW at an injection current of 700 mA. From these optoelectronic measurement and thermal infrared images, we proposed some design methodologies for improved current spreading, light output power, droop efficiency and thermal performance.

Introduction: The prevalence of nonhealing wounds is predicted to increase due to the growing aging population. Despite the use of novel skin substitutes and wound dressings, poorly vascularized wound niches impair wound repair. Mesenchymal stem cells (MSCs) have been reported to provide paracrine signals to promote wound healing, but the effect of human Wharton's jelly-derived MSCs (WJ-MSCs) has not yet been described in human normal skin., Methods: Human WJ-MSCs and normal skin fibroblasts were isolated from donated umbilical cords and normal adult human skin. Fibroblasts were treated with WJ-MSC-conditioned medium (WJ-MSC-CM) or nonconditioned medium., Results: Expression of genes involved in re-epithelialization (transforming growth factor-β2), neovascularization (hypoxia-inducible factor-1α) and fibroproliferation (plasminogen activator inhibitor-1) was upregulated in WJ-MSC-CM-treated fibroblasts (P≤0.05). WJ-MSC-CM enhanced normal skin fibroblast proliferation (P≤0.001) and migration (P≤0.05), and promoted wound healing in an excisional full-thickness skin murine model., Conclusions: Under our experimental conditions, WJ-MSCs enhanced skin wound healing in an in vivo mouse model.

Light extraction of GaN-based light-emitting diodes grown on Si(111) substrate (GaN-on-Si based LEDs) is presented in this study. Three different designs of GaN-on-Si based LEDs with the lateral structure, lateral structure on mirror/Si(100) substrate, and vertical structure on mirror/Si(100) substrate were epitaxially grown by metalorganic chemical vapor deposition and fabricated using chemical lift-off and double-transfer techniques. Current-voltage, light output power, far-field radiation patterns, and electroluminescence characteristics of these three LEDs were discussed. At an injection current of 700 mA, the output powers of LEDs with the lateral structure on mirror/Si(100) substrate and vertical structure on mirror/Si(100) substrate were measured to be 155.07 and 261.07 mW, respectively. The output powers of these two LEDs had 70.63% and 187.26% enhancement compared to that of LED with the lateral structure, respectively. The result indicated this vertical structure LED was useful in improving the light extraction due to an enhancement in light scattering efficiency while the high-reflection mirror and diffuse surfaces were employed.

We theoretically analyze plasmonic gap-mode nanocavities covered by a thick cladding layer at telecommunication wavelengths. In the presence of high-index cladding materials such as semiconductors, the first-order hybrid gap mode becomes more promising for lasing than the fundamental one. Still, the significant mirror loss remains the main challenge to lasing. Using silver coatings within a decent thickness range at two end facets, we show that the reflectivity is substantially enhanced above 95 %. At a coating thickness of 50 nm and cavity length of 1.51 μm, the quality factor is about 150, and the threshold gain is lower than 1500 cm(-1).

A detailed study on the optical cavity modes of zinc oxide microspheres under the optical excitation is presented. The zinc oxide microspheres with diameters ranging from 1.5 to 3.0 µm are prepared using hydrothermal growth technique. The photoluminescence measurement of a single microsphere shows prominent resonances of whispering gallery modes at room temperature. The experimentally observed whispering gallery modes in the photoluminescence spectrum are compared with theoretical calculations using analytical and finite element methods in order to clarify resonance properties of these modes. The comparison between theoretical analysis and experiment suggests that the dielectric constant of the ZnO microsphere is somewhat different from that for bulk ZnO. The sharp resonances of whispering gallery modes in zinc oxide microspheres cover the entire visible window. They may be utilized in realizations of optical resonators, light emitting devices, and lasers for future chip integrations with micro/nano optoelectronic circuits, and developments of optical biosensors.

We explored anti-inflammatory potential of melatonin against the lipopolysaccharide (LPS)-induced inflammation in vivo and in vitro. RAW 264.7 and BV2 cells were stimulated by LPS, followed by the treatment with melatonin or vehicle at various time intervals. In a mouse model of meningitis induced by LPS, melatonin (5mg/kg) or vehicle was intravenously injected at 30min postinsult. The activity of matrix metalloproteinase-2 (MMP-2) and metalloproteinase-9 (MMP-9) was determined by gelatin zymography. Nuclear factor-kappa B (NFκB) translocation and binding activity were determined by immunocytochemistry and electrophoretic mobility shift assay (EMSA). Our results showed that either pretreatment or cotreatment with melatonin at 50-500 μm effectively inhibited the LPS-induced proMMP-9 activation in the RAW 264.7 and BV2 cells, respectively (P<0.05). This melatonin-induced proMMP-9 inhibition remained effective when treatment was delayed up to 2 and 6hr postinsult for RAW 264.7 and BV2 cells, respectively (P<0.05 for both groups). Additionally, melatonin significantly attenuated the rises of circulatory and cerebral MMP-9 activity, respectively (P<0.05) and reduced the loss of body weight (P<0.05) in mice with meningitis. Moreover, melatonin (50μm) effectively inhibited nuclear factor-kappa B (NFκB) translocation and binding activity in the LPS-treated RAW 264.7 and BV2 cells, respectively (P<0.05). These results demonstrate direct inhibitory actions of melatonin against postinflammatory NFκB translocation and MMP-9 activation and highlight its ability to inhibit systemic and cerebral MMP-9 activation following brain inflammation., (© 2012 John Wiley & Sons A/S.)

This Letter presents a scheme to embed both angular/spectral surface plasmon resonance (SPR) in a unique far-field rainbow feature by tightly focusing (effective NA=1.45) a polychromatic radially polarized beam on an Au (20 nm)/SiO2 (500 nm)/Au (20 nm) sandwich structure. Without the need for angular or spectral scanning, the virtual spectral probe snapshots a wide operation range (n=1-1.42; λ=400-700 nm) of SPR excitation in a locally nanosized region. Combined with the high-speed spectral analysis, a proof-of-concept scenario was given by monitoring the NaCl liquid concentration change in real time. The proposed scheme will certainly has a promising impact on the development of objective-based SPR sensor and biometric studies due to its rapidity and versatility.

LEDs have changed the concept of illumination not only in an expectation of the highest electroluminance efficiency but also in tremendous chances for smart lighting applications. With a cluster mixing, many studies were addressed to strategically manipulate the chromaticity point, system efficiency and color rendering performance according to different operational purposes. In this paper, we add an additional thermal function to extend the operational thermal window of a pentachromatic R/G/B/A/CW light engine over a chromaticity from 2800K to 8000K. The proposed model is experimentally validated to offer a full operable range in ambient temperature (Ta = 10° to 100°C) associated with high color quality scale (above 85 points) as well as high luminous efficiency (above 100 lm/watt).

Asthma is a common chronic disease among children in Taiwan. Acute asthma exacerbation is a cause of strong concern for children and parents and represents a challenge for pediatric healthcare providers. This review summarizes the most up-to-date information on assessing and managing acute asthma exacerbations in children. The latest guidelines (National Asthma Education and Prevention Program, Expert Panel Report 3, 2007 and the Global Initiative for Asthma, 2010) recommend using sensitive instruments to assess asthma exacerbation severity and administering early treatment in order to avoid emergency outpatient visits and hospitalizations. SABA (short acting β-agonist) in combination with systematic cortisone is the most widely prescribed pharmaceutical intervention for acute asthma management. Other pediatric asthma medications are still in the trial stage. Educating parents on self-management techniques, especially with regard to the correct application of asthma medication on children, is crucial to reducing relapse incidents and visits to the emergency ward. Nursing studies addressing the issue of asthma exacerbation in children and parents are currently at the initial, qualitative stage. More evidence-based studies are necessary to explore and understand the independent role and function of nurses in acute pediatric asthma care.

The interplay between light polarization and matter is the basis of many fundamental physical processes and applications. However, the electromagnetic wave nature of light in free space sets a fundamental limit on the three-dimensional polarization orientation of a light beam. Although a high numerical aperture objective can be used to bend the wavefront of a radially polarized beam to generate the longitudinal polarization state in the focal volume, the arbitrary three-dimensional polarization orientation of a beam has not been achieved yet. Here we present a novel technique for generating arbitrary three-dimensional polarization orientation by a single optically configured vectorial beam. As a consequence, by applying this technique to gold nanorods, orientation-unlimited polarization encryption with ultra-security is demonstrated. These results represent a new landmark of the orientation-unlimited three-dimensional polarization control of the light-matter interaction.

This paper presents a methodology analogous to a general lens design rule to optimize step-by-step the spectral power distribution of a white-light LED cluster with the highest possible color rendering and efficiency in a defined range of color temperatures. By examining a platform composed of four single-color LEDs and a phosphor-converted cool-white (CW) LED, we successfully validate the proposed algorithm and suggest the optimal operation range (correlated color temperature = 2600-8500 K) accompanied by a high color quality scale (CQS > 80 points) as well as high luminous efficiency (97% of cluster's theoretical maximum value).

In this paper, we demonstrated a far-field scheme for the manipulation of locally excited surface plasmon polaritons (SPPs). This scheme features steering and shaping capabilities, and relies on the focusing of a high numerical aperture, in conjunction with spatially inhomogeneous polarized (SIP) illumination. We were able to control the propagation and direction of SPPs, via the field distribution of polarization at the entrance pupil, without the need for an aperture, protrusion or any other near-field features. Depending on the axial position of the focus, the field distribution of excited SPPs revealed either counter-propagating interference or a multi-casting plasmonic source. The results of near-field imaging demonstrated the versatility of the SPPs, showing strong agreement with the predictions made during simulations. Due to the simplicity and versatility of the proposed method, we believe that it could have a significant impact the processes employed in the excitation of a variety of SPPs.

For the phosphor-converted light-emitting diodes (pcLEDs), the interaction of the illuminating energy with the phosphor would not just behave as a simple wavelength-converting phenomenon, but also a function of various combinations of illumination and viewing geometries. This paper presents a methodology to characterize the converting and scattering mechanisms of the phosphor layer in the pcLEDs by the measured bidirectional scattering distribution functions (BSDFs). A commercially available pcLED with conformal phosphor coating was used to examine the validity of the proposed model. The close agreement with the measurement illustrates that the proposed characterization opens new perspectives for phosphor-based conversion and scattering feature for white lighting uses.