Search

Mato Grosso state is the biggest maize producer in Brazil, with the predominance of cultivation concentrated in the second harvest. Due to the need to obtain more accurate and efficient data, agricultural intelligence is adapting and embracing new technologies such as the use of satellites for remote sensing and geographic information systems. In this respect, this study aimed to map the second harvest maize cultivation areas at Canarana-MT in the crop year 2019/2020 by using geographic object-based image analysis (GEOBIA) with different spatial, spectral, and temporal resolutions. MSI/Sentinel-2, OLI/Landsat-8, MODIS-Terra and MODIS-Aqua, and PlanetScope imagery were used in this assessment. The maize crops mapping was based on cartographic basis from IBGE (Brazilian Institute of Geography and Statistics) and the Google Earth Engine (GEE), and the following steps of image filtering (gray-level co-occurrence matrix—GLCM), vegetation indices calculation, segmentation by simple non-iterative clustering (SNIC), principal component (PC) analysis, and classification by random forest (RF) algorithm, followed finally by confusion matrix analysis, kappa, overall accuracy (OA), and validation statistics. From these methods, satisfactory results were found; with OA from 86.41% to 88.65% and kappa from 81.26% and 84.61% among the imagery systems considered, the GEOBIA technique combined with the SNIC and GLCM spectral and texture feature discriminations and the RF classifier presented a mapping of the corn crop of the study area that demonstrates an improved and aided the performance of automated multispectral image classification processes. [ABSTRACT FROM AUTHOR]

Plants respond to biotic and abiotic pressures by changing their biophysical and biochemical aspects, such as reducing their biomass and developing chlorosis, which can be readily identified using remote-sensing techniques applied to the VIS/NIR/SWIR spectrum range. In the current scenario of agriculture, production efficiency is fundamental for farmers, but diseases such as target spot continue to harm soybean yield. Remote sensing, especially hyperspectral sensing, can detect these diseases, but has disadvantages such as cost and complexity, thus favoring the use of UAVs in these activities, as they are more economical. The objectives of this study were: (i) to identify the most appropriate input variable (bands, vegetation indices and all reflectance ranges) for the metrics assessed in machine learning models; (ii) to verify whether there is a statistical difference in the response of NDVI (normalized difference vegetation index), grain weight and yield when subjected to different levels of severity; and (iii) to identify whether there is a relationship between the spectral bands and vegetation indices with the levels of target spot severity, grain weight and yield. The field experiment was carried out in the 2022/23 crop season and involved different fungicide treatments to obtain different levels of disease severity. A spectroradiometer and UAV (unmanned aerial vehicle) imagery were used to collect spectral data from the leaves. Data were subjected to machine learning analysis using different algorithms. LR (logistic regression) and SVM (support vector machine) algorithms performed better in classifying target spot severity levels when spectral data were used. Multivariate canonical analysis showed that healthy leaves stood out at specific wavelengths, while diseased leaves showed different spectral patterns. Disease detection using hyperspectral sensors enabled detailed information acquisition. Our findings reveal that remote sensing, especially using hyperspectral sensors and machine learning techniques, can be effective in the early detection and monitoring of target spot in the soybean crop, enabling fast decision-making for the control and prevention of yield losses. [ABSTRACT FROM AUTHOR]

Obtaining soybean genotypes that combine better nutrient uptake, higher oil and protein levels in the grains, and high grain yield is one of the major challenges for current breeding programs. To avoid the development of unpromising populations, selecting parents for crossbreeding is a crucial step in the breeding pipeline. Therefore, our objective was to estimate the combining ability of soybean cultivars based on the F2 generation, aiming to identify superior segregating parents and populations for agronomic, nutritional and industrial traits. Field experiments were carried out in two locations in the 2020/2021 crop season. Leaf contents of the following nutrients were evaluated: phosphorus, potassium, calcium, magnesium, sulfur, copper, iron, manganese, and zinc. Agronomic traits assessed were days to maturity (DM) and grain yield (GY), while the industrial traits protein, oil, fiber and ash contents were also measured in the populations studied. There was a significant genotype × environment (G × A) interaction for all nutritional traits, except for P content, DM and all industrial traits. The parent G3 and the segregating populations P20 and P27 can be used aiming to obtain higher nutritional efficiency in new soybean cultivars. The segregating populations P11 and P26 show higher potential for selecting soybean genotypes that combine earliness and higher grain yield. The parent G5 and segregant population P6 are promising for selection seeking improvement of industrial traits in soybean. [ABSTRACT FROM AUTHOR]

Soil salinity affects plant growth, compromising sugarcane cultivation in regions with great production potential. Saccharum complex genotypes that respond positively to growth under saline environment can be used in the diversification of sugarcane cultivars to obtain greater economic returns. The objective of this study was to evaluate growth‐related traits of Saccharum genotypes grown under the presence and absence of salinity. The experiment was carried out in a 32 × 2 factorial scheme in a randomized block design with three replicates. The first factor consisted of 32 genotypes of the Saccharum complex and the second factor consisted of the presence and absence of salinity. The salinity provided higher mean values than the environment without salinity for plant height in the genotypes G9, G11, G13, G22 and G28, leaf number for G9 and G24, leaf area index for G9 and stem diameter for G1, G11 and G24. Among the genotypes tested, G1, G9, G11, G13, G22, G24 and G28 were the most promising genotypes and could be used for breeding new sugarcane cultivars of enhanced salinity tolerance. [ABSTRACT FROM AUTHOR]

Physical classification is the procedure adopted by the rice unloading, delivery, storage, and processing units for the commercial characterization of the quality of the grains. This step occurs mostly by the conventional method, which demands more time and specialized labor, and the results are subjective since the evaluation is visual. In order to make the operation faster, more accurate, and less dependent, non-destructive technologies and computational intelligence can be applied to characterize grain quality. Therefore, this study aimed to characterize and predict the quality of whole, processed rice grains, as well as classify any defects present. This was achieved by sampling from the upper and lower points of four silo dryers with capacities of up to 40,000 sacks. The grain samples had moisture contents of 16%, 17%, 18%, and 19% and were subjected to drying-aeration until reaching 12% moisture content (w.b.). Near-infrared spectroscopy technology and Machine Learning algorithm models (Artificial Neural Networks, decision tree algorithms Quinlan's algorithm, Random Tree, REPTree, and Random Forest) were employed for this purpose. By analyzing Pearson's correlation statistics, a strong negative correlation (R2 = 0.98) was found between moisture content and the yield of whole grains. Conversely, a strong positive correlation (R2 = 0.97) was observed between moisture content and classified physical defects across the various characterized physicochemical constituents. These findings indicate the effectiveness of near-infrared spectroscopy technology. The Random Tree model (RandT) successfully predicted the grain quality outcomes and is therefore recommended as the model of choice, obtained Pearson's correlation coefficient (r = 0.96), mean absolute error (MAE = 0.017), and coefficient of determination (R2 = 0.92). The results obtained here reveal that the combination of near-infrared spectroscopy technology and Machine Learning algorithm models is an excellent non-destructive alternative to manual physical classification for characterizing the physicochemical quality of whole and defective rice grains. [ABSTRACT FROM AUTHOR]

Predicting maize yield using spectral information, temperature, and different irrigation management through machine learning algorithms provide information in a fast, accurate, and non-destructive way. The use of multispectral sensor data coupled with irrigation management in maize allows further exploration of water behavior and its relationship with changes in spectral bands presented by the crop. Thus, the objective of this study was to evaluate, by means of multivariate statistics and machine learning techniques, the relationship between irrigation management and spectral bands in predicting maize yields. Field experiments were carried out over two seasons (first and second seasons) in a randomized block design with four treatments (control and three additional irrigation levels) and eighteen sample repetitions. The response variables analyzed were vegetation indices (IVs) and crop yield (GY). Measurement of spectral wavelengths was performed with the Sensefly eBee RTK, with autonomous flight control. The eBee was equipped with the Parrot Sequoia multispectral sensor acquiring reflectance at the wavelengths of green (550 nm ± 40 nm), red (660 nm ± 40 nm), red-edge (735 nm ± 10 nm), and NIR (790 nm ± 40 nm). The blue length (496 nm) was obtained by additional RGB imaging. Data were subjected to Pearson correlations (r) between the evaluated variables represented by a correlation and scatter plot. Subsequently, the canonical analysis was performed to verify the interrelationship between the variables evaluated. Data were also subjected to machine learning (ML) analysis, in which three different input dataset configurations were tested: using only irrigation management (IR), using irrigation management and spectral bands (SB+IR), and using irrigation management, spectral bands, and temperature (IR+SB+Temp). ML models used were: Artificial Neural Network (ANN), M5P Decision Tree (J48), REPTree Decision Tree (REPT), Random Forest (RF), and Support Vector Machine (SVM). A multiple linear regression (LR) was tested as a control model. Our results revealed that Random Forest has higher accuracy in predicting grain yield in maize, especially when associated with the inputs SB+IR and SB+IR+Temp. [ABSTRACT FROM AUTHOR]

In Brazil, grain sorghum has been mainly grown in Cerrado biome during the off‐season, as a succession crop, after the soybean harvest. At this period, rainfall is erratic and insufficient, causing drought stress in pre‐ or post‐flowering of grain sorghum crops. In this scenario, the identification of both drought‐tolerant and irrigation responsive hybrids has been one of the main targets of sorghum breeding programmes. The hypothesis of this research was that grain sorghum genotypes respond differently to different moments of water deficit. This study aimed to evaluate the agronomic performance of sorghum hybrids under full irrigation and drought stress at pre‐ and post‐flowering, in order to identify hybrids tolerant to drought stress and responsive to the water supply. Field trials were carried out in Nova Porteirinha during the 2017/2018 and 2018/2019 crop seasons. Twelve grain sorghum single‐hybrids were evaluated for days to flowering and grain yield in three water availability conditions: drought stress at pre‐flowering, drought stress at post‐flowering and full‐irrigation (control). Tolerant hybrids were identified under both pre‐ and post‐flowering drought stress, as well as hybrids responsive to irrigation. The hybrids 1G282 and 116,748 stood out in the 2017/18 season for high yield and earliness under both drought‐stress conditions, while the hybrid 1G282, AG1090, AS4625 and DKB590 stood out for the 2018/19 season in both stress condition. The hybrid A9904 and 1G282 stood out for its responsiveness to water supply, being recommended to high‐tech farming systems that employ irrigation or for in‐season cultivation. [ABSTRACT FROM AUTHOR]