Search

It has been generally accepted for long that water molecules are integral parts of layered double hydroxides (LDHs). It is even thought that in the absence of water molecules, there is no LDH structure. It is shown in this contribution that via the solvolysis of Mg- or Ca-alkoxides and Al-alkoxide with methanol or propanol and co-precipitated in methanolic methoxide, water-free LDH-like structures could be constructed. These novel LDH-like materials proved to be more active and selective catalysts in a Knoevenagel condensation than the corresponding 'classical' LDHs. Synthesis, thought to be not possible to prepare, characterization and a catalytic application of water-free LDHs are described. Water molecules are replaced by small alcohol molecules in the interlayer space. [ABSTRACT FROM AUTHOR]

The synthesis of the copper-poor and aluminum-rich layered double hydroxides (LDHs) of the CuAl4 type was optimized in detail in this work, by applying an intense mechanochemical treatment to activate the gibbsite starting reagent. The phase-pure forms of these LDHs were prepared for the first time; using copper nitrate and perchlorate salts during the syntheses turned out to be the key to avoiding the formation of copper hydroxide sideproducts. Based on the use of the optimized syntheses parameters, the preparation of layered triple and multiple hydroxides was also attempted using Ni(II), Co(II), Zn(II) and even Mg(II) ions. These studies let us identify the relative positions of the incorporating cations in the well-known selectivity series as Ni2+ >> Cu2+ >> Zn2+ > Co2+ >> Mg2+. The solids formed were characterized by using powder X-ray diffractometry, UV–Vis diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. The catalytic potential of the samples was investigated in carbon monoxide oxidation reactions at atmospheric pressure, supported by an in situ diffuse reflectance infrared spectroscopy probe. All solids proved to be active and the combination of the nickel and cobalt incorporation (which resulted in a NiCoAl8 layered triple hydroxide) brought outstanding benefits regarding low-temperature oxidation and increased carbon monoxide conversion values. [ABSTRACT FROM AUTHOR]

In this study, we report a base‐catalyzed transesterification reaction of glycerol, a waste product of the biodiesel industry, with various dialkyl carbonates, which act both as reactants and solvents, to convert glycerol carbonate into an industrially useful molecular building block. The catalyst, being used for the first time, is also a waste product from industry, present in bauxite residues and in the Portland cement, simply known as tricalcium aluminate. Despite being well‐known and readily available, this solid is only extremely poorly researched catalyst, nevertheless, using dimethyl and diethyl carbonate, glycerol conversion rates >80% and glycerol carbonate yields >60% could be achieved in just 1 h (under air atmosphere and reflux). In a comparison of the performance with other catalysts commonly researched today, as well as with other components of red mud and cements, the results showed that tricalcium aluminate is excellent, cheap, and largely environmentally friendly material for this purpose. Reusability studies of the catalysts have also shown that they provide high conversion and product yields even after repeated use, although different material characterization techniques showed intense glycerol‐catalyst surface interaction and intermediate product formation, the deactivating side effects of which could be avoided by catalyst regeneration steps. [ABSTRACT FROM AUTHOR]

In hydrometallurgical processing and acidic wastewater treatment, one of the neutralizing agents employed is MgO or Mg(OH)2. At the end of this process, the resulting solution, which is rich in SO42− and Mg2+ is treated with lime to remove (or minimize the amount) of these ions via the precipitation of Mg(OH)2 and CaSO4·2H2O (gypsum). In our work, an attempt was made to separate the two solids by increasing the induction time of the gypsum precipitation, thus regenerating relatively pure Mg(OH)2 which could be reused in wastewater treatments or hydrometallurgical processing circuits, and in this way, significantly enhancing the economic viability of the process. During our experiments, the reaction of an MgSO4 solution with milk of lime prepared from quicklime was studied. The effects of a range of organic additives, which can slow down the precipitation of gypsum have been assessed. The process was optimized for the most promising inhibiting agent—that is, the citrate ion. The reactions were continuously monitored in situ by conductometric measurements with parallel monitoring of solution pH and temperature. ICP-OES measurements were also carried out on samples taken from the reaction slurry. The composition of the precipitating solids at different reaction times was established by powder XRD and their morphology by SEM. Finally, experiments were carried out to locate the additive after the completion of the precipitation reaction to get information about its potential reuse. [ABSTRACT FROM AUTHOR]

In the present work, the structure and thermal stability of Ca–Al mixed-metal compounds, relevant in the Bayer process as intermediates, have been investigated. X-ray diffraction (XRD) measurements revealed the amorphous morphology of the compounds, which was corroborated by SEM-EDX measurements. The results of ICP-OES and UV-Vis experiments suggested the formation of three possible ternary calcium aluminum heptagluconate (Ca-Al-Hpgl) compounds, with the formulae of CaAlHpgl(OH)40, Ca2AlHpgl2(OH)50 and Ca3Al2Hpgl3(OH)90. Additional IR and Raman experiments revealed the centrally symmetric arrangement of heptagluconate around the metal ion. The increased thermal stability was demonstrated by thermal analysis of the solids and confirmed our findings. [ABSTRACT FROM AUTHOR]