Search

Alternating current (ac) losses in conductor-on-rounded-core (CORC) cables of YBCO high-temperature superconducting (HTS) tapes are a significant challenge in HTS power applications. This study employs two finite element analysis (FEA) models to investigate the contributions from different ac loss components and provide approaches for reducing ac losses in cables. An FEA model based on the T-A formulation treats the cross section of thin superconducting layers as 1D lines and, therefore, only can predict the ac loss generated by the perpendicular magnetic field. In contrast, the model based on H-formulation can be performed on the actual 2D rectangular cross section HTS tapes to provide the total ac losses generated by magnetic fluxes penetrating from both the edges and surfaces of HTS tapes, although this model requires more computing time and memory. The 1D and 2D simulation models were validated by cross comparing the results from both models and by comparing sub-section and full cross section models. Subsequently, two models relate cable design and operational parameters to the surface and edge losses of a two-layer CORC cable by considering the (1) relative contributions of edge and surface losses to the overall ac losses; (2) effect of the current distribution between inner and outer HTS layers on ac losses; (3) impact of the tape alignment on ac losses in each HTS layer; (4) influence of the thickness of HTS layers on ac losses; (5) effect of size and number of inter-tape gaps on ac losses; and (6) contribution frequency on the ac losses. The research results given in this paper are therefore not only valuable to suggest strategies for reducing ac loss in multi-layer cables but also for developing more accurate and effective methods to calculate ac loss in CORC HTS cables. [ABSTRACT FROM AUTHOR]

Superconductors play a crucial role in the advancement of high-field electromagnets. Unfortunately, their performance can be compromised by thermomagnetic instabilities, wherein the interplay of rapid magnetic and slow heat diffusion can result in catastrophic flux jumps, eventually leading to irreversible damage. This issue has long plagued high-Jc Nb3Sn wires at the core of high-field magnets. In this study, we introduce a large-scale GPU-optimized algorithm aimed at tackling the complex intertwined effects of electromagnetism, heating, and strain acting concomitantly during the quenching process of superconducting coils. We validate our model by conducting comparisons with magnetization measurements obtained from short multifilamentary Nb3Sn wires and further experimental tests conducted on solenoid coils while subject to ramping transport currents. Furthermore, leveraging our developed numerical algorithm, we unveil the dynamic propagation mechanisms underlying thermomagnetic instabilities (including flux jumps and quenches) within the coils. Remarkably, our findings reveal that the velocity field of flux jumps and quenches within the coil is correlated with the cumulated Joule heating over a time interval rather than solely being dependent on instantaneous Joule heating power or maximum temperature. These insights have the potential to optimize the design of next-generation superconducting magnets, thereby directly influencing a wide array of technologically relevant and multidisciplinary applications. Flux jumps can lead to premature quenching and irreversible damage of superconducting magnets. Here, authors developed a GPU-optimized algorithm aimed at tackling the complex intertwined effects of electromagnetism, heating, and strain acting concomitantly on real superconducting coils. [ABSTRACT FROM AUTHOR]

As a high-efficiency cooling technology for high-temperature superconducting coils, we have begun research and development to examine the feasibility of a cooling assist technology that maintains a cryogenic state by combining the magnetic force generated by the superconducting coil with magnetic refrigeration technology. Magnetic refrigeration requires the magneto caloric material to change the magnetic field. In many cases, the magnetic field change is obtained by moving the magnetic source, but moving the superconducting coil is not a good idea. Although it is possible to generate a change in the magnetic field by turning on and off the power supply of the high-temperature superconducting coil, it is unlikely to be established as a system that assists cooling of the superconducting coil because the coil generates heat due to AC loss. Therefore, it was considered that the magnetic field change can be obtained if the magnetic force generated from the superconducting coil can be controlled by the magnetic shield. As a verification of the principle, it was clarified experimentally that a magnetic field change can be obtained by repeatedly inserting and removing the magnetic shield into and from the gap between the magnetic field generation source and the magneto caloric material, and the temperature change can be extracted by the magneto caloric effect. In the experiment, the temperature change obtained when a magnetic shield was inserted into the air gap was measured by a simple test device using an iron-based magneto caloric material having high magneto caloric effect performance at room temperature and a permanent magnet. The principle verification confirmation test was performed using several types of magnetic shielding materials such as Permalloy bulks and the electrical steel sheets. In addition, numerical analysis is performed on the magnetic shielding effect, and the shielding effect is improved by increasing the thickness of the shielding material and the possibility of using high temperature superconductors as magnetic shielding materials were also analyzed. In this study, we report the possibility of cooling the high-temperature superconducting coil with high efficiency by combining the magnetic field created by the superconducting coil and magnetic refrigeration. [ABSTRACT FROM AUTHOR]

We report the fabrication of small (Ba,A)Fe2As2 (A: Na, K) coils using 10 m-class long round wires, fabricated by the powder-in-tube method. Coils are sintered using the hot-isostatic-press technique after glass-fiber insulations are installed. Critical current (Ic) of the whole coil using (Ba,Na)Fe2As2 and (Ba,K)Fe2As2 are 60 A and 66 A under the self-field, and the generated magnetic fields at the center of the coil reach 2.6 kOe and 2.5 kOe, respectively. Furthermore, the largest transport critical current density (Jc) and Ic in (Ba,Na)Fe2As2 wires picked up from the coil reach 54 kA cm−2 and 51.8 A at T = 4.2 K under a magnetic field of 100 kOe, respectively. This value exceeds transport Jc of all previous iron-based superconducting round wires. Texturing of grains in the core of the wire due to the improvement of the wire drawing process plays a key role for the enhancement of Jc. [ABSTRACT FROM AUTHOR]

Quench detection capability is essential for reliable operation and protection of superconducting magnets, coils, cables, and machinery. We propose a quench detection technique based on sensing local temperature variations in the bulk of a superconducting winding by monitoring its transient acoustic response. Our approach is primarily aimed at coils and devices built with high-temperature superconductor materials where quench detection using standard voltage-based techniques may be inefficient due to the slow velocity of quench propagation. The acoustic sensing technique is non-invasive, fast, and capable of detecting temperature variations of less than 1 K in the interior of the superconductor cable stack in a 77 K cryogenic environment. We show results of finite element modeling and experiments conducted on a model superconductor stack demonstrating viability of the technique for practical quench detection, discuss sensitivity limits of the technique, and its various applications.

The optimized design of a new high-temperature superconducting rotating pole machine is presented. Its main structural feature is the use of a double stator core which separates the synchronous machine pole shoe from the pole body to rotate separately as the machine rotor, allowing the superconducting coil to operate in a stationary state. The inner stator core, the stationary dewar and the rotor core together form the excitation system of the machine. The excitation coil windings adopt a rectangular cross-section, with flux divertor strategically placed between the high-temperature superconducting coils. This configuration aims to modulate the background magnetic field, specifically reducing the perpendicular magnetic field component. This mitigation minimizes the impact of ambient magnetic fields on the superconducting coil's current carrying capacity, ensuring an optimized magnetic field environment for its operation. Through the integration of these modifications, the technical and economic parameters of the enhanced high-temperature superconducting machine have been significantly improved. The optimization of design, coupled with detailed calculations of the 3D electromagnetic field, was achieved utilizing the commercial software Ansys EM module. [ABSTRACT FROM AUTHOR]

This article presents the impact of MgB2 wire bending and diameter on transport critical current density and irreversible magnetic field of a resultant coil. Unreacted MgB2 wires 500 mm in length and 0.63 or 0.83 mm in diameter have been used in the fabrication of small diameter (14 mm) superconducting coils. The coils were subsequently annealed under isostatic pressure of 1 GPa for 15 min at 700 °C and 725 °C. Our results indicate that larger wire diameter, higher annealing temperature, and bending lead to slight reduction of critical current density and irreversible magnetic field in the coil. [ABSTRACT FROM AUTHOR]

High temperature superconducting (HTS) magnets often work at high energy density and have slow quench propagation speed, so a quench will present a serious risk to the safety of magnets. The quench protection method based on the dump resistance can effectively reduce the current and release the energy in the HTS magnets. However, too large dump resistance may cause excessive voltage across the magnets. A quench protection system consisting of dump resistances and metal discs has been proposed. Copper discs are often embedded in HTS magnets for conducting cooling and mechanical support. In the discharging process of HTS magnets, the copper discs can absorb energy from the magnets through magnetic coupling, thus accelerating the current decay of the magnets. This quench protection method is more effective than using dump resistance alone. In this paper, the effect of different copper discs on the discharging process of HTS coils is discussed. Eight types of copper with different residual resistivity ratios (RRR) are applied. The results show that with the increase of the RRR of the copper disc, the current decay rate of the coil increases, and the energy absorbed by the copper disc from the coil increases. The role of different copper discs in the fast quench protection of the coil can be sorted as: RRR = 300 > RRR = 100 > RRR = 80 > RRR = 60 > RRR = 40 > RRR = 30 > RRR = 20 > RRR = 10. The copper disc with RRR of 300 shows the best performance in quench protection of HTS coils.

The linear generators having armature winding of copper or superconductor for generation of electrical power from the oceanic wave are usually made of ordinary mild steel core. The heat generated due to armature core loss poses challenges to the superconductor to maintain cryogenic temperature. In this paper, high grade ferromagnetic cores namely Armco DI-MAX M27 and DI-MAX HF 10 are used in a high temperature superconductor linear generator so that the generation of heat energy due to core loss can be minimized. The mathematical model of the linear generator is presented in detail. ANSYS/Maxwell software package is used for simulation works. The magnetic saturation of Armco DI-MAX M27 is higher than that of the DI-MAX HF 10. On the other hand, DI-MAX HF 10 has lower core loss than that of the Armco DI-MAX M27. The novelty of the proposed linear generator is that, it considers all these parameters for both the copper and superconducting coil/winding. Simulation results exhibit excellent features of the proposed linear generator having superconducting coils in its armature with high graded ferromagnetic cores. [ABSTRACT FROM AUTHOR]

Hydrogen ejectors effectively utilize excess unreacted hydrogen. However, traditional ejectors have limited operational ranges and are only suitable for specific power ranges. This paper presents a dual-nozzle ejector aimed at broadening its operational range through different working modes. A simulation model, validated by experiments, is employed based on the working principles of ejectors. Spiral blades are installed at drive end to improve the recirculation efficiency. Flow characteristics, including streamwise and spanwise vortices at high power, are also investigated in different modes. Results indicate that optimal operating range for Ring-nozzle(RN) mode is between 31.1 and 124.4A. When output current exceeds 124.4A, it is necessary to switch to Central-nozzle (CN) or Double-nozzles (DNs) mode. Analysis of streamlines and velocity vectors reveals that installing spiral blades can modify directions of primary flow. Blades with appropriate distortion should be selected. In CN mode, when stack reaches 60% of rated power, installing 20° spiral blades has a minimal impact on stability of radial flow. Installing 30° or 40° spiral blades is suitable for full-load condition. In DNs mode, installing 30° spiral blades enhances acceleration of gas flow with lower influence from radial influx. This ejector provides assurance for upgrade of fuel cell stacks by incorporating recirculation technology. • A dual-nozzle ejector with spiral guide blades is designed, verified and evaluated. • Installed spiral blades change direction and gather kinetic energy of primary flow. • Advantageous working conditions of different modes with blades are discussed. • Flow mechanism of different blades under high power in two modes is analyzed. • Flow acceleration and losses should be balanced by changing the twist of blades. [ABSTRACT FROM AUTHOR]

High-temperature superconducting (HTS) coils are generally operated in a closed-loop persistent current mode, which is crucial for ensuring long-term stability and minimizing heat generation in various applications. However, factors such as joint resistance, flux creep, and losses due to external fields can lead to accelerated decay of the coil's current, making it challenging to achieve an effective persistent current mode. To gain insight into the current decay characteristics of HTS coils, we built a finite element method based model coupled with a lumped parameter electric circuit model. The model is initially verified against the experiment of an inductive magnetized HTS coil subject to a magnetic field perpendicular to the tape surface. The results indicate that the proposed model is highly effective in predicting the current decay behavior of this magnetized HTS coil and is able to provide high accuracy. With the help of this model, we have experimentally and numerically studied the behavior of a current-carrying closed-loop HTS coil subject to external alternating fields. The HTS coil is charged by a DC power supply and then shorted using a thermally-controlled persistent current switch. The current decay behavior of the HTS coil is examined under various scenarios. The simulation results show excellent agreement with experimental data, further validating the effectiveness and versatility of the modeling strategy. The influence of both local and global screening currents on the current decay performance of the closed-loop HTS coils has been investigated. For every case examined, rapid demagnetization occurred in the initial cycle of the applied alternating field. Furthermore, the current decay rate demonstrated a slight dependence on the frequency of the applied fields. Additionally, the resulting resistance has been thoroughly characterized. These insights contribute to the knowledge of the behavior and performance of closed-loop HTS coils, facilitating their practical application. [ABSTRACT FROM AUTHOR]

Ferromagnetic hysteresis measurements can be used to determine both magnetic and mechanical state variables that correlate with each other. Therefore, hysteresis measurements are suitable for mechanical material characterization. The application of standardized hysteresis measurement methods is complex and can only be used to a limited extent in an industrial environment. In this work, a BH (ferromagnetic hysteresis) curve is to be reconstructed on 22NiMoCr3-7 samples that are in different mechanically deformed states (different histories). The reconstruction of the hysteresis is performed by an impedance analysis of the H-field generating coil. The applied method demonstrates that the ferromagnetic hysteresis can be reconstructed by means of an impedance analysis and is sensitive to different states of plastical deformation. [ABSTRACT FROM AUTHOR]

In order to cope with the grid fluctuation caused by large‐scale wind power connected to the grid, the wind thermal power generation system has been proposed and extensively studied. The wind thermal power generation system uses a wind turbine to drive a heat generation device to heat the heat storage medium, which is further exchanged to drive a turbine to generate electricity. A superconducting magnetic eddy current heater (SMH) is proposed for the characteristics of wind thermal power generation system, which uses non‐resistive, large current‐carrying superconducting coils for excitation, and has high output efficiency and power density. The working principle of magnetic eddy current heating is analysed, and the structure of SMH with no ferromagnetic material and two heating screens inside and outside is proposed according to the characteristics of SMH. An analytical model of the SMH is established, and the influence of the structure and materials of the SMH on the magnetic field distribution is analysed. Based on this, a 22‐pole SMH was designed and analysed for output power at 10–20 rpm. A three‐dimensional magnetism‐stress combined analysis model of SMH is established, and the strain and stress characteristics of SMH are simulated under the condition of maximum output power, which verifies the feasibility of the mechanical properties of existing superconducting materials for application in SMH. [ABSTRACT FROM AUTHOR]

High‐field magnets have been used in a wide range of scientific and industrial areas. REBCO (REBa2Cu3Ox, where RE = Rare Earth) coated superconductors (CCs) have been gaining increasing interest due to the potentialities of using them in high‐field magnets. However, the thermal stability of the REBCO CCs coils is limited by longitudinal heat conduction inside the coils and bubbles generated by evaporating helium. So as to enhance the heat transfer in REBCO coil, a cooling system based on GM/JT cycle was designed. In this paper, the design, thermodynamic calculation, and analysis of the cooling system for the REBCO coil are provided systematically. It is found that when the mass flow rate is 0.75 g/s at a pressure of 10 bar, the cooling capacity of the system is up to 10.16 W. Meanwhile, the inlet pressure and counterflow heat exchangers efficiency are key factors for significantly improving the cooling capacity of the system. An open loop experiment also has been carried out and the cooling capacity of 0.79 W at 4.5 K is obtained finally when He mass flow rate is 0.1 g/s. © 2024 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

High fracture toughness at cryogenic temperature and radiation hardness can be conflicting requirements for the resins for the impregnation of superconducting magnet coils. The fracture toughness of different epoxy-resin systems at room temperature (RT) and at 77 K was measured, and their toughness was compared with that determined for a polyurethane, polycarbonate (PC) and poly(methyl methacrylate) (PMMA). Among the epoxy resins tested in this study, the MY750 system has the highest 77 K fracture toughness of KIC = 4.6 MPa√m, which is comparable to the KIC of PMMA, which also exhibits linear elastic behaviour and unstable crack propagation. The polyurethane system tested has a much higher 77 K toughness than the epoxy resins, approaching the toughness of PC, which is known as one of the toughest polymer materials. CTD101K is the least performing in terms of fracture toughness. Despite this, it is used for the impregnation of large Nb3Sn coils for its good processing capabilities and relatively high radiation resistance. In this study, the fracture toughness of CTD101K was improved by adding the polyglycol flexibiliser Araldite DY040 as a fourth component. The different epoxy-resin systems were exposed to proton and gamma doses up to 38 MGy, and it was found that adding the DY040 flexibiliser to the CTD101K system did not significantly change the irradiation-induced ageing behaviour. The viscosity evolution of the uncured resin mix is not significantly changed when adding the DY040 flexibiliser, and at the processing temperature of 60 °C, the viscosity remains below 200 cP for more than 24 h. Therefore, the new resin referred to as POLAB Mix is now used for the impregnation of superconducting magnet coils. [ABSTRACT FROM AUTHOR]