Search

For decades, partially oxidized hydrides were commonly considered as undesirably contaminated phases and were avoided by scientists. Nevertheless, more recently, it was realized that in some hydrides and oxides, partial substitution of dissimilar H− and O2− anions allows one to obtain unique optical and electrical properties that might have appealing applications in commercial products. It was determined that specific properties of so called oxyhydride materials strongly depend on the used synthesis methods; therefore, there is a great interest in exploring various variants of oxyhydride formation. In the current study, TiHxOy films were deposited by a reactive magnetron sputtering process in Ar-O2-H2 gas mixtures. Color, transparency and crystal phase composition of the films coherently reacted to the Ar:O2:H2 gas ratio. Namely, the rise in partial hydrogen pressure promoted the formation of anatase phase TiO2 structure and darkening of the films. Interestingly, this had only minimal impact on the band gap values, but had a relatively strong negative effect on the photocatalytic activity of the films. The unaccustomed results stressed the difference between the partially reduced TiO2 with a significant amount of oxygen vacancies and synthesized TiHxOy films where some O2− ions are implicitly substituted by H− ions.

Special attention has recently been paid to surface-defective titanium dioxide and black TiO2 with advanced optical, electrical, and photocatalytic properties. Synthesis of these materials for photodegradation and mineralization of persistent organic pollutants in water, especially under visible radiation, presents interest from scientific and application points of view. Chemical reduction by heating a TiO2 and NaBH4 mixture at 350 °C successfully introduced Ti3+ defects and oxygen vacancies at the surface of TiO2, with an increase in the photocatalytic degradation of amoxicillin—an antibiotic that is present in wastewater due to its intense use in human and animal medicine. Three TiO2 samples were prepared at different annealing temperatures to control the ratio between anatase and rutile and were subjected to chemical reduction. Electron paramagnetic resonance investigations showed that the formation of surface Ti3+ defects in a high concentration occurred mainly in the anatase sample annealed at 400 °C, contributing to the bandgap reduction from 3.32 eV to 2.92 eV. The reduced band gap enhances visible light absorption and the efficiency of photocatalysis. The nanoparticles of ~90 m2/g specific surface area and 12 nm average size exhibit ~100% efficiency in the degradation of amoxicillin under simulated solar irradiation compared with pristine TiO2. Mineralization of amoxicillin and by-products was over 75% after 48 h irradiation for the anatase sample, where the Ti3+ defects were present in a higher concentration at the catalyst’s surface.

Osteoarthritis, the most common joint disorder, is characterised by deterioration of the articular cartilage. Many studies have identified potential therapeutic targets, yet no effective treatment has been determined. The aim of this study was to identify and rank osteoarthritis-associated genes and micro-RNAs to prioritise those most integral to the disease. A systematic meta-analysis of differentially expressed mRNA and micro-RNAs in human osteoarthritic cartilage was conducted. Ingenuity pathway analysis identified cellular senescence as an enriched pathway, confirmed by a significant overlap (p < 0.01) with cellular senescence drivers (CellAge Database). A co-expression network was built using genes from the meta-analysis as seed nodes and combined with micro-RNA targets and SNP datasets to construct a multi-source information network. This accumulated and connected 1689 genes which were ranked based on node and edge aggregated scores. These bioinformatic analyses were confirmed at the protein level by mass spectrometry of the different zones of human osteoarthritic cartilage (superficial, middle, and deep) compared to normal controls. This analysis, and subsequent experimental confirmation, revealed five novel osteoarthritis-associated proteins (PPIB, ASS1, LHDB, TPI1, and ARPC4-TTLL3). Focusing future studies on these novel targets may lead to new therapies for osteoarthritis.

Yttrium oxyhydride exhibits photochromic properties at ambient temperature and pressures. Although oxygen plays an important role in determining the optoelectronic properties of the material, the question remains open regarding the site that it occupies in the crystal structure. In this paper, we address the issue by synchrotron radiation and neutron powder diffraction measurements. We report that the oxide anions occupy tetrahedral sites together with hydride anions in the face-centered cubic structure.

Abstract The effects of Cr on local environment and electronic structure of rutile TiO2 are studied combining theoretical and experimental approaches. Neutral and negatively charged substitutional Cr impurities CrTi 0 and CrTi 1− as well as Cr-oxygen vacancy complex 2CrTi + VO are studied by the density functional theory (DFT) within the generalized gradient approximation (GGA) of Perdew-Burke-Ernzerhof (PBE) functional. Experimental results based on X-Ray absorption spectroscopy (XAS) and X-Ray photoelectron spectroscopy (XPS) performed on Cr doped TiO2 at the Synchrotron facility were compared to the theoretical results. It is shown that the electrons of the oxygen vacancy tend to be localized at the t 2g states of the Cr ions in order to reach the stable oxidation state of Cr3+. Effects of Cr on crystal field (CF) and structural distortions in the rutile TiO2 cell were analyzed by the DFT calculations and XAS spectra revealing that the CF and tetragonal distortions in TiO2 are very sensitive to the concentration of Cr.

Pigments can retain their color for many centuries and can withstand the effects of light and weather. The paint industry suffers from issues like aggressive moisture, corrosion, and further environmental contamination of the pigment materials. Low-cost, long-lasting, and large-scale pigments are highly desirable to protect against the challenges of contamination that exist in the paint industry. This exploratory study reinforces the color and thermal stability of industrial-grade (IG) magnetite (Fe3O4). IG Fe3O4 pigments were further considered for surface treatment with sodium hexametaphosphate (SHMP). This metaphosphate hexamer sequestrant provides good dispersion ability and a high surface energy giving thermal and dust protection to the pigment. Various physicochemical characterizations were employed to understand the effectiveness of this treatment across various temperatures (180–300 °C). The X-ray diffraction, Raman, and X-ray photoelectron spectroscopy techniques signify that the SHMP-treated Fe3O4 acquired magnetite phase stability up to 300 °C. In addition, the delta-E color difference method was also adopted to measure the effective pigment properties, where the delta-E value significantly decreased from 8.77 to 0.84 once treated with SHMP at 300 °C. The distinct color retention at 300 °C and the improved dispersion properties of surface-treated Fe3O4 positions this pigment as a robust candidate for high-temperature paint and coating applications. This study further encompasses an effort to design low-cost, large-scale, and thermally stable pigments that can protect against UV-rays, dust, corrosion, and other color contaminants that are endured by building paints.

Stem cells aging: balancing self-renewal halt with complexity Mounting evidence suggests a link between cellular senescence and human adult stem cell function upon aging. Senescence is often viewed as an intrinsic program to prevent oncogenic transformation. However, the collaborative research lead by Aelan Cell Technologies suggests that replicative senescence might be more dynamic than previously anticipated. Integrated genomic and proteomic analyses of human adult stem cells revealed that subset of senescence-associated miRNAs (SA-miRNA) functionally required for establishing senescence, act to provide an intricate balance between driving and restraining cancerous events upon senescence. It is commonly believed that cancer arises as a consequence of an imbalance in cellular homeostasis. These new results shed light on the fundamental role of these SA-miRNA as functionally antagonistic regulators of gene networks, future exploration of which can help us understand the etiology underlying age-related disease and cancer.

Flooding of the cathode flow channel is a major hindrance in achieving maximum performance from Proton Exchange Membrane Fuel Cells (PEMFC) during the scaling up process. Water accumulated between the interface region of Gas Diffusion Layer (GDL) and rib of the cathode flow field can be removed by the use of Porous Sponge Inserts (PSI) on the ribs. In the present work, the experimental investigations are carried out on PEMFC for the various reaction areas, namely 25, 50 and 100 cm2. Stoichiometry value of 2 is maintained for all experiments to avoid variations in power density obtained due to differences in fuel utilization. The experiments include two flow fields, namely Serpentine Flow Field (SFF) and Modified Serpentine with Staggered provisions of 4 mm PSI (4 mm × 2 mm × 2 mm) Flow Field (MSSFF). The peak power densities obtained on MSSFF are 0.420 W/cm2, 0.298 W/cm2 and 0.232 W/cm2 compared to SFF which yields 0.242 W/cm2, 0.213 W/cm2 and 0.171 W/cm2 for reaction areas of 25, 50 and 100 cm2 respectively. Further, the reliability of experimental results is verified for SFF and MSSFF on 25 cm2 PEMFC by using Electrochemical Impedance Spectroscopy (EIS). The use of 4 mm PSI is found to improve the performance of PEMFC through the better water management.

The fabrication of cost-effective photostable materials with optoelectronic properties suitable for commercial photoelectrochemical (PEC) water splitting represents a complex task. Herein, we present a simple route to produce Sb2Se3 that meets most of the requirements for high-performance photocathodes. Annealing of Sb2Se3 layers in a selenium-containing atmosphere persists as a necessary step for improving device parameters; however, it could complicate industrial processability. To develop a safe and scalable alternative to the selenium physical post-processing, we propose a novel SbCl3/glycerol-based thermochemical treatment for controlling anisotropy, a severe problem for Sb2Se3. Our procedure makes it possible to selectively etch antimony-rich oxyselenide presented in Sb2Se3, to obtain high-quality compact thin films with a favorable morphology, stoichiometric composition, and crystallographic orientation. The treated Sb2Se3 photoelectrode demonstrates a record photocurrent density of about 31 mA cm−2 at −248 mV against the calomel electrode and can thus offer a breakthrough option for industrial solar fuel fabrication.