Search

Synthetic methylotrophic Yarrowia lipolytica was constructed to convert methanol into biomass components and succinic acid.

2-Phenylethanol (2-PE), a higher alcohol with a rose-like odor, has been widely utilized in food, perfume, and beverages. Saccharomyces cerevisiae is one of the most promising microorganisms for the biosynthesis of natural 2-PE. However, the growth of S. cerevisiae is generally inhibited by 2-PE, which makes its production in yeast cell factories challenging. Here, the whole-cell bioconversion was used to avert growth inhibition, leading to an increase in the concentration and productivity of 2-PE. Moreover, rapamycin (Rap) addition further improved the efficiency of 2-PE synthesis. The concentration of 2-PE (2.20 g/L) was 1.68-fold higher than that in the absence of Rap during the whole-cell bioconversion by S. cerevisiae BY4741. RT-qPCR results showed that Rap addition increased the transcription of ARO9, ARO10, ADH2, GAP1, ARO80, GLN3, and GDH2. When the GLN3 was knocked out, the transcriptional levels of the genes were dramatically decreased, and the concentration of 2-PE significantly decreased to 0.21 g/L. The results indicated that Rap enhanced the flux of the Ehrlich pathway, and Gln3 exerted a central role in the regulation of Rap. Furthermore, commercial yeast (S. cerevisiae FY202001) was selected to verify the applicability of Rap. In the presence of Rap, 3.67 g/L 2-PE was obtained by whole-cell bioconversion in flask, which was increased by 9% than that in the absence of Rap. Finally, the 2-PE titer reached 4.93 g/L by whole-cell bioconversion in a 5 L bioreactor, with a yield of 84 mol% from L-phenylalanine and a productivity of 0.103 g/L h, which was far higher than that of the currently reported in S. cerevisiae. These findings provided a new idea for the efficient synthesis of 2-PE. KEY POINTS: • Whole-cell bioconversion was used to produce 2-PE. • The regulation of the Ehrlich pathway by Rap provides a theoretical basis for developing an effective yeast cell factory to produce 2-PE. • The 2-PE productivity of 0.103 g/L h is far higher than that of the currently reported in S. cerevisiae .

Glutamic acid is an important amino acid that is used widely in the fields of food, medicine, and agriculture. One of the methods of glutamic acid production is direct microbial fermentation, so the genetic stability and glutamic-acid-producing capacity of the producing strain are the keys to improving glutamic acid concentration. Experiments were carried out using Corynebacterium glutamicum GL−6 as the parental strain, with two iterations of mutagenesis by atmospheric and room temperature plasma (ARTP) and screening with agar plates tolerant to high sugar and malonic acid, and the best strains with stable phenotypes were verified by fermentation in 20 L tanks. The results show that the optimal mutagenesis time of ARTP was 140 s, with lethality and positive mutation rates of 93.0% and 15.6%, respectively. The concentrations of the high-sugar and malonic acid agar plates were 240 g/L and 35 g/L, respectively. A mutant strain, P−45, with improved glutamic acid production capacity and genetic stability, was obtained through two rounds of iterative mutagenesis screening. The concentration of this strain in the Erlenmeyer flasks was 17.7 g/L, which was 18.8% higher than that of the parental strain, GL−6, and could be inherited stably for 10 generations. In the glutamic acid synthesis pathway, the upregulation of the gene encoding citrate synthase (cs), gene encoding isocitrate dehydrogenase (icdh), and gene encoding glutamate dehydrogenase (gdh), and the downregulation of the gene encoding oxoglutarate dehydrogenase complex (odhc) increased the carbon flows of the TCA cycle and its branch metabolic flow to glutamic acid synthesis. P−45 showed a glutamic acid concentration of 147.0 g/L under fed-batch fermentation conditions in 20 L tanks, which was 81.5% higher than the starting strain, GL−6. This study provides a new technical solution for improving microbial metabolites and genetic stability.

Flux balance analysis (FBA) is an important method for calculating optimal pathways to produce industrially important chemicals in genome-scale metabolic models (GEMs). However, for biologists, the requirement of coding skills poses a significant obstacle to using FBA for pathway analysis and engineering target identification. Additionally, a time-consuming manual drawing process is often needed to illustrate the mass flow in an FBA-calculated pathway, making it challenging to detect errors or discover interesting metabolic features. To solve this problem, we developed CAVE, a cloud-based platform for the integrated calculation, visualization, examination and correction of metabolic pathways. CAVE can analyze and visualize pathways for over 100 published GEMs or user-uploaded GEMs, allowing for quicker examination and identification of special metabolic features in a particular GEM. Additionally, CAVE offers model modification functions, such as gene/reaction removal or addition, making it easy for users to correct errors found in pathway analysis and obtain more reliable pathways. With a focus on the design and analysis of optimal pathways for biochemicals, CAVE complements existing visualization tools based on manually drawn global maps and can be applied to a broader range of organisms for rational metabolic engineering. CAVE is available at https://cave.biodesign.ac.cn/.

Methanotrophs capable of converting C1-based substrates play an important role in the global carbon cycle. As one of the essential macronutrient components in the medium, the uptake of nitrogen sources severely regulates the cell's metabolism. Although the feasibility of utilizing nitrogen gas (N

Due to its pleasant rose-like scent, 2-phenylethanol (2-PE) has been widely used in the fields of cosmetics and food. Microbial production of 2-PE offers a natural and sustainable production process. However, the current bioprocesses for de novo production of 2-PE suffer from low titer, yield, and productivity. In this work, a multilevel metabolic engineering strategy was employed for the high-level production of 2-PE. Firstly, the native alcohol dehydrogenase YugJ was identified and characterized for 2-PE production via genome mining and gene function analysis. Subsequently, the redirection of carbon flux into 2-PE biosynthesis by combining optimization of Ehrlich pathway, central metabolic pathway, and phenylpyruvate pathway enabled the production of 2-PE to a titer of 1.81 g/L. Specifically, AroK and AroD were identified as the rate-limiting enzymes of 2-PE production through transcription and metabolite analyses, and overexpression of aroK and aroD efficiently boosted 2-PE synthesis. The precursor competing pathways were blocked by eliminating byproduct formation pathways and modulating the glucose transport system. Under the optimal condition, the engineered strain PE23 produced 6.24 g/L of 2-PE with a yield and productivity of 0.14 g/g glucose and 0.13 g/L/h, respectively, using a complex medium in shake flasks. This work achieves the highest titer, yield, and productivity of 2-PE from glucose via the phenylpyruvate pathway. This study provides a promising platform that might be widely useful for improving the production of aromatic-derived chemicals.

High Heterologous PHB Production and Continuous Anaerobic Ethanol Fermentation using Zymomonas mobilis.

Genome minimization is an effective way for industrial chassis development. In this study

Curcumin is the main active ingredient of turmeric, which has a wide range of pharmacological effects, including antitumor, antibacterial, anti-inflammatory, anti-oxidation, immune regulation, and so on. Periodontitis is a prevalent oral inflammatory disease caused by a variety of factors. In recent years, many studies have shown that curcumin has a potential role on the treatment of periodontitis. Curcumin has been used in research related to the treatment of periodontitis in the form of solution, chip, gel, and capsule. Combined with other periodontitis treatment methods, such as scaling and root planing (SRP) and photodynamic therapy (PDT), can enhance curcumin's efficacy in treating periodontitis. In addition to natural curcumin, chemically modified curcumin, such as 4-phenylaminocarbonyl bis-demethoxy curcumin (CMC 2.24) and 4-methoxycarbonyl curcumin (CMC 2.5), have also been used in animal models of periodontitis. Here, this paper reviews the research progress of curcumin on the treatment of periodontitis and its related mechanisms.

Polyetheretherketone (PEEK) has become increasingly popular in dentistry and orthopedics due to its excellent chemical stability, reliable biosafety, and low elastic modulus. However, PEEK's biomechanical strength and bioactivity are limited and need to be increased as an implant material. The previous study in vitro has shown that the amino-functionalized carbon fiber reinforced PEEK (A-30%-CPEEK) possessed enhanced mechanical property and bioactivity. This study aims to evaluate the effect of amino groups modification on the osseointegration behavior of carbon fiber reinforced PEEK (30%-CPEEK) in rabbits. Herein, 30%-CPEEK and A-30%-CPEEK implant discs were implanted in rabbit skulls for 5 weeks, with pure titanium implants serving as a control. The bone-forming ability and osseointegration in vivo were systematically investigated by micro-computed tomography analysis, scanning electron microscope observation, and histological evaluation. Our results showed that all detection parameters were significantly different between the A-30%-CPEEK and 30%-CPEEK groups, favoring those in the A-30%-CPEEK, whose appraisal parameters were equal to or better than pure titanium. Therefore, this study supported the importance of amino groups in facilitating the new bone formation and bone-implant integration, suggesting that A-30%-CPEEK with enhanced osseointegration will be a promising material for dental or orthopedic implants.

To find alternative non-metallic materials as dental implants for clinical application, different types of carbon fiber reinforced polyetheretherketone were fabricated and investigated.Continuous carbon fiber reinforced polyetheretherketone fabrics were fabricated with polyetheretherketone fibers and carbon fibers. Different kinds of carbon fiber reinforced polyetheretherketone were synthesized by setting specific experiment parameters of injection or hot press molding. Various mechanical tests were performed to determine the mechanical properties of different carbon fiber reinforced polyetheretherketone, pure polyetheretherketone and pure titanium.Polyetheretherketone composites presented outstanding mechanical and thermal properties after incorporating carbon fiber. The bending and tensile strength of short carbon fiber reinforced polyetheretherketone were close to human bone, and the bending strength of continuous carbon fiber reinforced polyetheretherketone reached 644 MPa, even higher than that of pure titanium.The mechanical properties of polyetheretherketone composites are more similar to bone tissue than titanium, and the stress shielding phenomenon may be inhibited. They may become promising materials as substitutions for titanium and prospective materials in bone tissue engineering.

Commercial cellulosic biofuel operation requires a reliable, low-cost, and stable feedstock logistic system. One great challenge is its long-term storage at least for one harvest cycle (1 year for ...

BACKGROUND In this case study, a minimally invasive transalveolar approach using platelet-rich fibrin and bone substitute with simultaneous implantation was carried out in an elderly patient. We analyzed the cone-beam computed tomography (CBCT) findings to evaluate bone regeneration. CASE SUMMARY A 65-year-old female with no contraindications for dental implants and loss of maxillary bilateral molars is described. Examination by CBCT showed the available vertical bone height in the bilateral posterior maxilla was 0.5-6.8 mm in the left and 2.8-6.5 mm in the right. The patient underwent a transalveolar approach using platelet-rich fibrin and bone substitute with simulataneous placement of an implant 10 mm in length. Six months post-surgery, the implant showed excellent osseointegration with the bone graft. Thereafter, full-ceramic crowns were fitted. Follow-up at 2 years demonstrated satisfactory prognosis. CONCLUSION Platelet-rich fibrin and bone substitute can be used to augment the maxillary sinus with a vertical bone height less than 4 mm.

Lichenysin, producted by Bacillus licheniformis, is an important cyclic lipopeptide biosurfactant, which has potential applications in oil exploitation, drug development, biological control of agriculture and bioremediation. While studies are lacking on metabolism regulation of lichenysin biosynthesis, which limits metabolic engineering and large-scale production of lichenysin. In this study, the yield of lichenysin was improved obviously by 13.6 folds to 2.18 ± 0.03 g/L in degU deletion strain (WX02△degU) compared with the wild-type strain (WX02) and completely inhibited in degU overexpressed strain (WX02/pHY-degU). We further proved that DegU, a transcription factor plays a significant role in multicellular behavior, is a key negative regulator of lichenysin synthesis lchA operon. But interestingly, lichenysin yield was still inhibited by overexpressing DegU in the promoter-substituted strain (WX02-P

BackgroundAcid pretreatment is a common strategy used to break down the hemicellulose component of the lignocellulosic biomass to release pentoses, and a subsequent enzymatic hydrolysis step is usually applied to release hexoses from the cellulose. The hydrolysate after pretreatment and enzymatic hydrolysis containing both hexoses and pentoses can then be used as substrates for biochemical production. However, the acid-pretreated liquor can also be directly used as the substrate for microbial fermentation, which has an acidic pH and contains inhibitory compounds generated during pretreatment. Although the natural ethanologenic bacteriumZymomonas mobiliscan grow in a broad range of pH 3.5 ~ 7.5, cell growth and ethanol fermentation are still affected under acidic-pH conditions below pH 4.0.ResultsIn this study, adaptive laboratory evolution (ALE) strategy was applied to adaptZ. mobilisunder acidic-pH conditions. Two mutant strains named 3.6M and 3.5M with enhanced acidic pH tolerance were selected and confirmed, of which 3.5M grew better than ZM4 but worse than 3.6M in acidic-pH conditions that is served as a reference strain between 3.6M and ZM4 to help unravel the acidic-pH tolerance mechanism. Mutant strains 3.5M and 3.6M exhibited 50 ~ 130% enhancement on growth rate, 4 ~ 9 h reduction on fermentation time to consume glucose, and 20 ~ 63% improvement on ethanol productivity than wild-type ZM4 at pH 3.8. Next-generation sequencing (NGS)-based whole-genome resequencing (WGR) and RNA-Seq technologies were applied to unravel the acidic-pH tolerance mechanism of mutant strains. WGR result indicated that compared to wild-type ZM4, 3.5M and 3.6M have seven and five single nucleotide polymorphisms (SNPs), respectively, among which four are shared in common. Additionally, RNA-Seq result showed that the upregulation of genes involved in glycolysis and the downregulation of flagellar and mobility related genes would help generate and redistribute cellular energy to resist acidic pH while keeping normal biological processes inZ. mobilis. Moreover, genes involved in RND efflux pump, ATP-binding cassette (ABC) transporter, proton consumption, and alkaline metabolite production were significantly upregulated in mutants under the acidic-pH condition compared with ZM4, which could help maintain the pH homeostasis in mutant strains for acidic-pH resistance. Furthermore, our results demonstrated that in mutant 3.6M, genes encoding F1F0ATPase to pump excess protons out of cells were upregulated under pH 3.8 compared to pH 6.2. This difference might help mutant 3.6M manage acidic conditions better than ZM4 and 3.5M. A few gene targets were then selected for genetics study to explore their role in acidic pH tolerance, and our results demonstrated that the expression of two operons in the shuttle plasmids,ZMO0956–ZMO0958encoding cytochrome bc1 complex andZMO1428–ZMO1432encoding RND efflux pump, could helpZ. mobilistolerate acidic-pH conditions.ConclusionAn acidic-pH-tolerant mutant 3.6M obtained through this study can be used for commercial bioethanol production under acidic fermentation conditions. In addition, the molecular mechanism of acidic pH tolerance ofZ. mobiliswas further proposed, which can facilitate future research on rational design of synthetic microorganisms with enhanced tolerance against acidic-pH conditions. Moreover, the strategy developed in this study combining approaches of ALE, genome resequencing, RNA-Seq, and classical genetics study for mutant evolution and characterization can be applied in other industrial microorganisms.

Pectate lyase treatment can be an alternative strategy of the chemical processing, which causes severe environmental pollution, and has been broadly studied and applied for diverse industrial applications including textile industry, beverage industry, pulp processing, pectic wastewater pretreatment, and oil extraction. This review gave a brief description of the origins, enzymatic characterizations, structure, and applications of pectate lyases (Pels). Most of the reported pectate lyases are originated from microorganisms with a small number of them from plants and animals. Due to the diverse environments that these microorganisms exist, Pels present diversified features, especially for the range of optimal pH and temperature. The diversified biochemical properties of Pels define their applications in different industries, and the applications of alkaline Pels on cotton bioscouring and ramie degumming in textile industry were focused in this review. This review also discussed the perspectives of the development and applications of Pels. KEY POINTS: • The first review on pectate lyase focusing on biotechnological applications. • Origins, features, structures, applications of pectate lyases reviewed. • Applications of alkaline Pels in textile industry demonstrated. • Perspectives on future development and applications of Pels discussed.

Background Biofuels and value-added biochemicals derived from renewable biomass via biochemical conversion have attracted considerable attention to meet global sustainable energy and environmental goals. Isobutanol is a four-carbon alcohol with many advantages that make it attractive as a fossil-fuel alternative. Zymomonas mobilis is a highly efficient, anaerobic, ethanologenic bacterium making it a promising industrial platform for use in a biorefinery. Results In this study, the effect of isobutanol on Z. mobilis was investigated, and various isobutanol-producing recombinant strains were constructed. The results showed that the Z. mobilis parental strain was able to grow in the presence of isobutanol below 12 g/L while concentrations greater than 16 g/L inhibited cell growth. Integration of the heterologous gene encoding 2-ketoisovalerate decarboxylase such as kdcA from Lactococcus lactis is required for isobutanol production in Z. mobilis. Moreover, isobutanol production increased from nearly zero to 100–150 mg/L in recombinant strains containing the kdcA gene driven by the tetracycline-inducible promoter Ptet. In addition, we determined that overexpression of a heterologous als gene and two native genes (ilvC and ilvD) involved in valine metabolism in a recombinant Z. mobilis strain expressing kdcA can divert pyruvate from ethanol production to isobutanol biosynthesis. This engineering improved isobutanol production to above 1 g/L. Finally, recombinant strains containing both a synthetic operon, als-ilvC-ilvD, driven by Ptet and the kdcA gene driven by the constitutive strong promoter, Pgap, were determined to greatly enhance isobutanol production with a maximum titer about 4.0 g/L. Finally, isobutanol production was negatively affected by aeration with more isobutanol being produced in more poorly aerated flasks. Conclusions This study demonstrated that overexpression of kdcA in combination with a synthetic heterologous operon, als-ilvC-ilvD, is crucial for diverting pyruvate from ethanol production for enhanced isobutanol biosynthesis. Moreover, this study also provides a strategy for harnessing the valine metabolic pathway for future production of other pyruvate-derived biochemicals in Z. mobilis.

The $ {K_n}\textrm{ - } $ residual graph was proposed by P. Erdös, F. Harary and M. Klaw. They also proposed conclusions and conjectures regarding connected $ m - {K_n}\textrm{ - } $ residual graphs. When $ m = 1 $ , $ n \ne 1,2,3,4 $ , the authors proved that $ {K_{n + 1}} \times {K_2} $ is the only connected residual graph with a minimum order. In this paper, we proved that there are three different connected $ 3 - {K_5}\textrm{ - } $ residual graphs with a minimum order of 32, a unique connected $ 3 - {K_6}\textrm{ - } $ residual graph with a minimum order of 33, and a unique connected $ 3 - {K_8}\textrm{ - } $ residual graph with a minimum order of 44, which is not isomorphic to $ {K_{11}} \times {K_4} $ . At the same time, when $ n \ge 5,n \ne 6 $ , we proved that the minimum order of a connected $ 3 - {K_n}\textrm{ - } $ residual graph is $ 4n + 12 $ , and when $ n \ge 7,n \ne 8, $ $ {K_{n + 3}} \times {K_4} $ is the unique smallest connected $ 3 - {K_n}\textrm{ - } $ residual graph. Therefore, we verified the conjecture about connected $ 3 - {K_n}\textrm{ - } $ residual graphs. When $ n \ge 5 $ , we could obtain the minimum order and specify the corresponding extremal graph of the connected $ 3 - {K_n}\textrm{ - } $ residual graphs.

Zymomonas mobilis is a model bacterial ethanologen and has been engineered to produce lignocellulosic biofuels and biochemicals such as 2,3-butanediol. We have previously identified promoters of different strengths using systems biology datasets and characterized them using the flow cytometry-based dual reporter-gene system. Here, we further demonstrated the capability of applying the dual reporter-gene system and omics datasets on discovering inducible promoters. Ten candidate ethanol-inducible promoters were identified through omics datasets mining and clustering. Using the dual reporter-gene system, these promoters were characterized under natural growth, ethanol stress, and ethanol-induced condition to investigate the transcriptional strength and ethanol inducibility. The results demonstrated that three promoters of P0405, P0435, and P0038 driving the expression of native genes of ZMO0405, ZMO0435, and ZMO0038, correspondingly, are potential ethanol-responsive promoters and may be growth related. This study not only identified and verified three ethanol-inducible promoters as biological parts, which can be used to synchronize the expression of heterologous pathway genes with the ethanol production process of Z. mobilis, but also demonstrated the power of combining omics datasets and dual reporter-gene system to identify biological parts for metabolic engineering and synthetic biology applications in Z. mobilis and related microorganisms.

Zygosaccharomyces rouxii is an osmotolerant and halotolerant yeast that can participate in fermentation. To understand the mechanisms of salt and sugar tolerance, the transcription levels of Z. rouxii M 2013310 under 180 g/L NaCl stress and 600 g/L glucose stress were measured. The transcriptome analysis showed that 2227 differentially expressed genes (DEGs) were identified under 180 g/L NaCl stress, 1530 DEGs were identified under 600 g/L glucose stress, and 1278 DEGs were identified under both stress conditions. Then, KEGG enrichment analyses of these genes indicated that 53.3% of the upregulated genes were involved in the ergosterol synthesis pathway. Subsequently, quantitative PCR was used to verify the results, which showed that the genes of the ergosterol synthesis pathway were significantly upregulated under 180 g/L NaCl stress. Finally, further quantitative testing of ergosterol and spotting assays revealed that Z. rouxii M 2013310 increased the amount of ergosterol in response to high salt stress. These results highlighted the functional differences in ergosterol under sugar stress and salt stress, which contributes to our understanding of the tolerance mechanisms of salt and sugar in Z. rouxii.

As orthopedic and dental implants, polyetheretherketone (PEEK) is expected to be a common substitute material of titanium (Ti) and its alloys due to its good biocompatibility, chemical stability, and elastic modulus close to that of bone tissue. It could avoid metal allergy and bone resorption caused by the stress shielding effect of Ti implants, widely studied in the medical field. However, the lack of biological activity is not conducive to the clinical application of PEEK implants. Therefore, the surface modification of PEEK has increasingly become one of the research hotspots. Researchers have explored various biomolecules modification methods to effectively enhance the osteogenic and antibacterial activities of PEEK and its composites. Therefore, this review mainly summarizes the recent research of PEEK modified by biomolecules and discusses the further research directions to promote the clinical transformation of PEEK implants.