Search

This paper deals with importance and position of upbringing of children with disabilities, and it gives a review of ten efficient, evidence-based, support programs created for parents of children with disabilities, which are used globally. Contemporary concept of children upbringing in general includes interaction between parents and children in a process of upbringing and participation of a child in its own development. In this regard, parents of children with disabilities need strong support targeted at strengthening their parental capacities and building special skills, considering their children's disabilities. There are no support programs for parents of children with disabilities in Serbia. Evidence-based and proven support programs for families and parents have to be provided, promoted and offered as constantly available support for parents and children with disabilities within the comprehensive and complex process of upbringing.

Background/Aim. During drilling implant sites, mechanical energy is converted into thermal one resulting in transient rise in temperature of surrounding bone. The temperature of 47°C exeeding one minute impairs osseointegration, compromises mechanical properties of the local bone and could cause early implant failure. This in vitro study aimed to assess the effect of surgical drill guide and temperature of irrigans on thermal changes of the local bone during drilling implant sites, and to test the influence of irrigans temperature on the temperature of surgical drill guide. Methods. A total of 48 specimens obtained from bovine ribs were randomly allocated to four experimental conditions according to the 2 x 2 factorial design: drill guide (with or without) and saline (at 25°C or 5°C). Real-time infrared thermography was used as a method for temperature measurement. The primary outcome was bone temperature change during drilling implant sites measured at 3 osteotomy depths, whereas the second one was change in the temperature of the drill guide. Data were analyzed by Brunner and Langer nonparametric analysis and Wilcoxon test. Results. The effect of drill guide on the changes of bone temperature was significant at the entrance of osteotomy, whereas the effect of saline temperature was significant at all osteotomy levels (p < 0.001). No significant interaction was found (p > 0.05). Guided surgery and irrigation with saline at 25°C were associated with the highest bone temperature increase. Increase in drill guide temperature was significantly higher when saline at 25°C was used (p < 0.001). Conclusion. Guided implant site preparation generates higher temperature of the local bone than conventional drilling, not exceeding the threshold for thermal bone necrosis. Although saline at room temperature provides sufficient heat control during drilling, cooled saline is more effective regardless the use of surgical drill guide.

The titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis like the temperature (500 and 550 °C) and the duration of the calcination (1.5, 2, and 2.5 h). X-ray powder diffraction (XRPD) results have shown that all synthesized nanopowders are dominantly in anatase phase, with the presence of a small amount of rutile in samples calcined at 550 °C. According to the results obtained by Williamson-Hall method, the anatase crystallite size was increased with the duration of the calcination (from 24 to 29 nm in samples calcined at lower, and from 30 to 35 nm in samples calcined at higher temperature). The analysis of the shift and linewidth of the most intensive anatase Eg Raman mode confirmed the XRPD results. The analysis of pore structure from nitrogen sorption experimental data described all samples as mesoporous, with mean pore diameters in the range of 5-8 nm. Nanopowder properties have been related to the photocatalytic activity, tested in degradation of the textile dye (C.I. Reactive Orange 16), carbofuran and phenol. [Projekat Ministarstva nauke Republike Srbije, br. III45018 i br. ON171032]

Introduction. Esophageal fibrovascular polyps are rare, benign, intraluminal, submucosal tumor-like lesions, characterized by pedunculated masses which can demonstrate enormous growth. The most frequent symptoms are dysphagia, vomiting and weight loss. Fibrovascular polyps with long stalks can regurgitate into the airways and cause asphyxia. Esophageal inflammatory pseudotumor is extremely rare lesion accompanied with various systemic manifestations as fever, anemia and thrombocytosis. Case report. We presented a 29-year-old man complaining of a long-lasting fever and dysphagia. He was found to have huge pedunculated submucosal tumor of esophagus, surgically completely resected. Histopathological examination showed that this giant tumor, 24 x 9 x 6 cm, was a fibrovascular polyp. The postoperative course was uneventful. The preoperative fever, anemia and thrombocytosis disappeared and did not recur in the postoperative course. Conclusion. We reported a patient with giant esophageal pedunculated tumor with clinical manifestations of inflammatory pseudotumor and histopathological picture of fibrovascular polyp, that we have not found described in the literature before.

Background/Aim. Different types of dental restorations are used for the therapy of unilateral free-end saddle edentulism. Unilateral complex partial denture is one of the indications for the Kennedy class II partial edentulism. The abscence of major connector and denture plate is an advantage compared to the conventional restorations, because of better comfort and shorter period of adaptation. The aim of the study was to analyse the influence of free-end saddle length change on the behaviour of unilateral complex partial denture supporting structures. Methods. Stress levels of the canine and the first premolar as retentional teeth and the attachments were tested under the influence of physiological forces with the loading point shifting distally in relation to the saddle length change. A virtual real size 3D model of the fixed part of the restoration (the canine and the first premolar with milled crowns) was created using the CATIA computer program. It was connected to the mobile part of partial denture with the SD snap in latch attachment. Mobile part of the restoration was designed in the region of 2, 3 and 4 lateral teeth (second premolar, first, second and third molar). By using the finite element method (FEM) stress levels analysis was performed under the load of physiological forces of 150 N in the free-end saddle teeth zone. Results. The results of analysis show that physiological forces cause a different stress distribution on the abutment teeth and the attachment, depending on the saddle length. Conclusion. The stress level values obtained for the abutment teeth as well as the attachment are far lower than the marginal ones. The behaviour of the system changes under this defined stress, but no plastic deformation occurs.

Bacground/Aim. Retentive force of removable partial denture (RPD) directly depends on elastic force of stretched retentive clasp arms (RCAs). During deflection RCA must have even stress distribution. Safety factor is the concept which can be applied in estimating durability and functionality of RCAs. This study was based on analyzing properties of clasps designed by conventional clasp wax profiles and defining the optimal shapes of RCAs for stress distribution and safety factor aspects. Methods. Computer-aided-design (CAD) models of RCAs with simulated properties of materials used for fabrication of RPD cobalt-chromium-molybdenum (CoCrMo) alloy, commercially pure titanium (CPTi) and polyacetale were analyzed. Results. The research showed that geometrics of Rapidflex profiles from the BIOS concept are defined for designing and modeling RCAs from CoCrMo alloys. I-Bar and Bonihard clasps made from CPTi might have the same design as Co- CrMo clasp only by safety factor aspect, but it is obvious that CPTi are much more flexible, so their shape must be more massive. Polyacetale clasps should not be fabricated by BIOS concept for CoCrMo alloy. A proof for that is the low value of safety factor. Conclusion. The BIOS concept should be used only for RCAs made of CoCrMo alloy and different wax profiles should be used for fabricating clasps of other investigated materials. The contribution of this study may be the improvement of present systems for defining the clasps shapes made from CoCrMo alloys. The more significant application is possibility of creating new concepts in defining shapes of RCA made from CPTi and polyacetale.

Raman spectroscopy has been used for characterization of commercial nanosized TiO2 powder with declared grain size of 5 nm. The Raman spectra measured in Stokes and anti-Stokes regime confirm the anatase phase of TiO2 powder in temperature range 25-1173K. It is shown that phonon-confinement (due to small grain size) and nonstoichiometry (caused by laser irradiation in vacuum) have a great influence on blueshift and broadening of the main Eg Raman mode at low temperatures, while the influence of the strong anharmonic effect becomes dominant at higher temperatures. The phonon confinement effect decreases due to the crystallite growth at temperatures above 673K.

Defect structures related to the intrinsic and extrinsic oxygen vacancies in Ce0.85Nd(Gd)0.15O2-δ nanocrystals were studied by Raman scattering spectroscopy during the temperature treatment. It was observed that the agglomeration effect has major contribution to the stoichiometry of Ce0.85Nd(Gd)0.15O2-δ, namely the change of surface to volume ratio in nanocrystals has significant influence on the concentration and type of defect formed structures. Investigation of these structures is very important from the aspect of application of doped cerium dioxide as an electrolyte in solid oxide fuel cells.

Evolution as in all segments of human behavior and existence has left traces on human teeth. The aim of this study was to determine the frequency of the supernumerary teeth in skeletal remains found at the archeological site Stara Torina and SEM evaluation of the changes on the supernumerary teeth. The study included 90 skulls and 81 jaws of both sexes with average age 20-60 years. Supernumerary teeth were prepared for SEM for analyzing dental tissues. Six supernumerary teeth were found, among them five mesiodensand one paramolar. The frequency of hyperdontia in these skeletal remains is 2,1%. Mesiodens is different morphologically from the incisor it replaced and took part in occlusal contacts during mastication. Paramolar is different morphologically from molar teeth and it did not take part in occlusal contacts during mastication because of its low adherence for bone tissues and small dimensions.

Abstract Background Due to the complexity of health system reform in the post-conflict, post-disaster, and development settings, attempts to restructure health services are fraught with pitfalls that are often unanticipated because of inadequate preliminary assessments. Our proposed Integrated Multimodal Assessment – combining quantitative and qualitative methodologies – may provide a more robust mechanism for identifying programmatic priorities and critical barriers for appropriate and sustainable health system interventions. The purpose of this study is to describe this novel multimodal assessment using emergency medicine in post-conflict Serbia as a model. Methods Integrated quantitative and qualitative methodologies – system characterization and observation, focus group discussions, free-response questionnaires, and by-person factor analysis – were used to identify needs, problems, and potential barriers to the development of emergency medicine in Serbia. Participants included emergency and pre-hospital personnel from all emergency medical institutions in Belgrade. Results Demographic data indicate a loosely ordered network of part-time emergency departments supported by 24-hour pre-hospital services and an academic emergency center. Focus groups and questionnaires reveal significant impediments to delivery of care and suggest development priorities. By-person factor analysis subsequently divides respondents into distinctive attitudinal types, compares participant opinions, and identifies programmatic priorities. Conclusions By combining quantitative and qualitative methodologies, our Integrated Multimodal Assessment identified critical needs and barriers to emergency medicine development in Serbia and may serve as a model for future health system assessments in post-conflict, post-disaster, and development settings.

Objectives: To assess whether implant macrodesign parameters interacting with implant time in function (Tf) could influence the peri-implantitis occurrence., Materials and Methods: One hundred and two patients (55.17 ± 11.2 years old) with diagnosed early/moderate peri-implantitis around endosseous implants with implant-supported prosthetics reconstruction (n = 139) were recruited. Implant macrodesign (implant shape, thread number, implant collar), clinical parameters (peri-implant probing depth (PPD), clinical attachment level (CAL), keratinised tissue width (KTW), plaque index, bleeding on probe), implant placement localisation and region, and Tf were assessed and compared., Results: Peri-implantitis occurred approximately 6.1 ± 3.38 years after implant loading. There was a significant positive correlation between the implant macrodesign and Tf. Peri-implantitis rates were statistically significantly higher in implants with a cylindric shape and triple-thread in the posterior part of the mandible (p = 0.037 and 0.012, respectively). The thread number and implant shape interacting with Tf showed statistically significant influences on CAL and PPD increase (p < 0.05). Results indicated a statistically positive interaction between Tf and KTW decrease around the implants with microthreaded collar (p < 0.001)., Conclusion: Peri-implantitis might be presented as a time-dependent disease. Implant-based factors, such as Tf and implant macrodesign, could influence peri-implantitis occurrence, exacerbate clinical parameters, and promote progressive bone loss., Clinical Relevance: Peri-implantitis can be affected by implant macrodesign and Tf. The implant body shape, thread number, and design of the implant collar may be considered peri-implantitis-related risk indicators that should be taken into account in proper implant planning and therapy., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Colorectal cancer (CRC) is becoming a major public health problem in the Republic of Serbia. Organized mass screening has been shown to decrease CRC mortality and even its incidence. The aim of this study was to assess the acceptability of a faecal immunochemical test for haemoglobin proposed by primary care physicians. From August to November 2013, a pilot study for CRC screening was organized in individuals aged 50 to 74 years. The study included 50 primary healthcare centres from all 25 administrative regions of Serbia. A qualitative immunochromatographic faecal immunochemical test for human haemoglobin detection was used. Overall, 50 894 individuals were invited. The participation rate was 67.8 and 3.4% of the tests were positive. Among individuals with a positive test, 69.7% agreed to undergo colonoscopy. The positive predictive value was 27.1% for adenoma and 14.6% for carcinoma. This was the first CRC screening project encompassing approximately one-third of primary healthcare facilities in all regions across the country. It showed a good response of the target population and satisfactory cooperation of the healthcare professionals involved.

Aim: The aim of this study was comparing the effect of flapless vs. flap technique of implant placement on inflammation degree of peri-implant soft tissue, through histopathological analysis., Method: The experiment was conducted on five domestic pigs. Nine weeks after tooth extraction, implants were installed. Each animal received six implants in mandible. According to split-mouth design, randomly one side was used for flapless technique using mini-incision, while on the other side, flap was raised. After 7, 14, 21, 28, and 90 days, the experimental animals were sacrificed. Samples for histopathological analyzes were taken from the buccal side of peri-implant mucosa next to the neck of implants, from three levels. The degree of inflammatory response in the peri-implant soft tissue was estimated through ordinal scores from 0 to 3., Results: In the flap group Score 3 indicating high degree of inflammation was present from day 7 to day 21, in contrast to flapless group where Score 3 was not recorded during the entire follow-up. Three months after implantation, there were no signs of inflammation neither around flap nor around flapless implants., Conclusion: Flapless surgical implantation technique using mini-incision decreases peri-implant soft tissue inflammatory reaction compared with flap surgery., (© 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Aim: The aim of this 1-year prospective cohort study was to evaluate the outcomes and complications of immediately loaded mini dental implants used for stabilizing mandibular overdentures in edentulous patients wearing conventional complete dentures., Materials and Methods: Thirty patients received mandibular conventional complete dentures that were subsequently retained by 4 immediately loaded mini dental implants placed in the interforaminal region. Overdenture success, implant success and biological and prosthetic complications were evaluated after the first year of service. Quality of life using the Oral Heath Impact Profile (OHIP)- EDENT test, satisfaction with dental prosthesis and chewing efficiency using questionnaires and a Visual Analogue Scale (VAS) were evaluated twice: after they had received mandibular complete dentures, and again after they had received mandibular overdentures., Results: After 1 year, no overdenture failed and 2 implants did not osseointegrate, resulting in a 98.3% success rate for loaded implants and 95.9% for total implants used (3 out of 123 were not loaded due to fracture). A flap surgical approach was performed in 7 patients, 3 implants fractured during insertion, 3 overdentures fractured, occlusion balancing was necessary for 11 dentures and relining for 8. Implant rehabilitation provided significant improvement in quality of life, stability, comfort, chewing and speaking ability while no significant differences were found in quality of maintenance of hygiene and for aesthetics., Conclusions: Mini dental implant retained overdentures can be a successful therapeutic procedure for treating mandibular edentulism that improves quality of life, patient satisfaction and chewing ability in patients wearing maxillary dentures. Longer follow-ups are needed to validate this therapy in the medium and long-term.

Purpose: The National Kidney Foundation Kidney Disease Outcomes Quality Initiative (NKF-K/DOQI™) 2003 and Kidney Disease: Improving Global Outcomes (KDIGO) 2009 have established guidelines for the treatement of secondary hyperparathyroidism. This study evaluated the impact of parathyroidectomy to achieve recommended values for parathyroid hormone, calcium, phosphorus and CaxPO(4) product in dialysis patients with severe secondary hyperparathyroidism that is resistant to medical treatment., Methods: This study included 43 consecutive patients who underwent parathyroidectomy for a severe form of secondary hyperparathyroidism (SHPT) that is unresponsive to medical treatment. The serum iPTH, calcium and phosphorus levels were measured prior to surgery, every morning after surgery for 5 days and on the first, sixth and eighth postoperative months., Results: Following parathyroidectomy, a significant decline in iPTH values was observed in all patients; however, after the 8-month study period, only one of these patients achieved a serum iPTH concentration within the K/DOQI recommended target range. Unlike iPTH, targeting for calcium, phosphorus and CaxPO(4) at the last follow-up were 55.8%, 60.5% and 93%, respectively. These values indicated a significant improvement in comparison to preoperative percentages. In regards to the KDIGO recommended guidelines, the iPTH levels did not significantly change at the end of our study compared to preoperative values; however, calcium levels significantly declined and phosphorus levels significantly improved compared to preoperative values., Conclusions: Although the majority of patients fail to reach recommended iPTH values, parathyroidectomy remains a valuable tool to attain these NKF-K/DOQI recommendations for serum calcium, phosphorus and CaxPO(4) in dialysis patients with secondary hyperparathyroidism resistant to medical therapy. Parathyroidectomy was shown to be an inadequate intervention for achieving KDIGO recommendations.

The design and fabrication procedures for implementing a high-density (16-microm center spacing) single-mode fiber (SMF) array are described. The specific application for this array is a parallel optical coherence tomography system for endoscopic imaging. We obtained fiber elements by etching standard single-mode SMF-28 fibers to a diameter of 14-15 microm. We equalized 1-m lengths of fiber to within 1 mm by using a fiber interferometer setup, and we describe a method for packaging arrays with as many as 100 fibers.

We discuss the use of holographic photopolymer materials for use as dense wavelength division multiplexing filters in the C-band of the optical communication spectrum. An edge-illuminated hologram configuration is described that effectively extends the grating length to achieve narrow band filters operating near 1550 nm in photopolymers that are 100-200-microm thick. This configuration enables the formation of apodized and cascaded filter systems. Rouard's method is used to examine the properties of both apodization and cascaded gratings and indicates the potential for narrow spectral bandwidths (< 0.2 nm) and high side-lobe suppression (<-- 30 dB). Initial experimental results with a commercially available photopolymer are provided that verify narrowband spectral-transmittance properties (< 0.6 nm) and the ability to apodize the index profile. The primary limitation of the design is the absorption of existing photopolymer materials. Optimizing the polymer chemistry for filter design at 1550 nm may solve this problem.