Search

Liquid cell transmission electron microscopy has become a powerful and increasingly accessible technique for in situ studies of nanoscale processes in liquid and solution phase. Exploring reaction mechanisms in electrochemical or crystal growth processes requires precise control over experimental conditions, with temperature being one of the most critical factors. Here we carry out a series of crystal growth experiments and simulations at different temperatures in the well-studied system of Ag nanocrystal growth driven by the changes in redox environment caused by the electron beam. Liquid cell experiments show strong changes in both morphology and growth rate with temperature. We develop a kinetic model to predict the temperature-dependent solution composition, and we discuss how the combined effect of temperature-dependent chemistry, diffusion, and the balance between nucleation and growth rates affect the morphology. We discuss how this work may provide guidance in interpreting liquid cell TEM and potentially larger-scale synthesis experiments for systems controlled by temperature.

Correlated quantum phenomena in one-dimensional (1D) systems that exhibit competing electronic and magnetic order are of strong interest for the study of fundamental interactions and excitations, such as Tomonaga-Luttinger liquids and topological orders and defects with properties completely different from the quasiparticles expected in their higher-dimensional counterparts. However, clean 1D electronic systems are difficult to realize experimentally, particularly for magnetically ordered systems. Here, we show that the van der Waals layered magnetic semiconductor CrSBr behaves like a quasi-1D material embedded in a magnetically ordered environment. The strong 1D electronic character originates from the Cr-S chains and the combination of weak interlayer hybridization and anisotropy in effective mass and dielectric screening, with an effective electron mass ratio of m X e / m Y e ∼ 50. This extreme anisotropy experimentally manifests in strong electron-phonon and exciton-phonon interactions, a Peierls-like structural instability, and a Fano resonance from a van Hove singularity of similar strength to that of metallic carbon nanotubes. Moreover, because of the reduced dimensionality and interlayer coupling, CrSBr hosts spectrally narrow (1 meV) excitons of high binding energy and oscillator strength that inherit the 1D character. Overall, CrSBr is best understood as a stack of weakly hybridized monolayers and appears to be an experimentally attractive candidate for the study of exotic exciton and 1D-correlated many-body physics in the presence of magnetic order.

The integration of metallic contacts with two-dimensional (2D) semiconductors is routinely required for the fabrication of nanoscale devices. However, nanometer-scale variations in the 2D/metal interface can drastically alter the local optoelectronic properties. Here, we map local excitonic changes of the 2D semiconductor MoS 2 in contact with Au. We utilize a suspended and epitaxially grown 2D/metal platform that allows correlated electron energy-loss spectroscopy (EELS) and angle resolved photoelectron spectroscopy (nanoARPES) mapping. Spatial localization of MoS 2 excitons uncovers an additional EELS peak related to the MoS 2 /Au interface. NanoARPES measurements indicate that Au-S hybridization decreases substantially with distance from the 2D/metal interface, suggesting that the observed EELS peak arises due to dielectric screening of the excitonic Coulomb interaction. Our results suggest that increasing the van der Waals distance could optimize excitonic spectra of mixed-dimensional 2D/3D interfaces and highlight opportunities for Coulomb engineering of exciton energies by the local dielectric environment or moiré engineering.

Atomic-level defects in van der Waals (vdW) materials are essential building blocks for quantum technologies and quantum sensing applications. The layered magnetic semiconductor CrSBr is an outstanding candidate for exploring optically active defects because of a direct gap, in addition to a rich magnetic phase diagram, including a recently hypothesized defect-induced magnetic order at low temperature. Here, we show optically active defects in CrSBr that are probes of the local magnetic environment. We observe a spectrally narrow (1 meV) defect emission in CrSBr that is correlated with both the bulk magnetic order and an additional low-temperature, defect-induced magnetic order. We elucidate the origin of this magnetic order in the context of local and nonlocal exchange coupling effects. Our work establishes vdW magnets like CrSBr as an exceptional platform to optically study defects that are correlated with the magnetic lattice. We anticipate that controlled defect creation allows for tailor-made complex magnetic textures and phases with direct optical access.

Controlling magnetism at nanometer length scales is essential for realizing high-performance spintronic, magneto-electric and topological devices and creating on-demand spin Hamiltonians probing fundamental concepts in physics. Van der Waals (vdW)-bonded layered magnets offer exceptional opportunities for such spin texture engineering. Here, we demonstrate nanoscale structural control in the layered magnet CrSBr with the potential to create spin patterns without the environmental sensitivity that has hindered such manipulations in other vdW magnets. We drive a local phase transformation using an electron beam that moves atoms and exchanges bond directions, effectively creating regions that have vertical vdW layers embedded within the initial horizontally vdW bonded exfoliated flakes. We calculate that the newly formed two-dimensional structure is ferromagnetically ordered in-plane with an energy gap in the visible spectrum, and weak antiferromagnetism between the planes, suggesting possibilities for creating spin textures and quantum magnetic phases., (© 2022. The Author(s).)

Extraordinary optoelectronic properties of van der Waals (vdW) heterostructures can be tuned via strain caused by mechanical deformation. Here, we demonstrate strong and localized luminescence in the ultraviolet region from interface bubbles between stacked multilayers of hexagonal boron nitride (hBN). Compared to bubbles in stacked monolayers, bubbles formed by stacking vdW multilayers show distinct mechanical behavior. We use this behavior to elucidate radius- and thickness-dependent bubble geometry and the resulting strain across the bubble, from which we establish the thickness-dependent bending rigidity of hBN multilayers. We then utilize the polymeric material confined within the bubbles to modify the bubble geometry under electron beam irradiation, resulting in strong luminescence and formation of optical standing waves. Our results open a route to design and modulate microscopic-scale optical cavities via strain engineering in vdW materials, which we suggest will be relevant to both fundamental mechanical studies and optoelectronic applications., (© 2022. The Author(s).)

Nanoscale ionic programmable resistors for analog deep learning are 1000 times smaller than biological cells, but it is not yet clear how much faster they can be relative to neurons and synapses. Scaling analyses of ionic transport and charge-transfer reaction rates point to operation in the nonlinear regime, where extreme electric fields are present within the solid electrolyte and its interfaces. In this work, we generated silicon-compatible nanoscale protonic programmable resistors with highly desirable characteristics under extreme electric fields. This operation regime enabled controlled shuttling and intercalation of protons in nanoseconds at room temperature in an energy-efficient manner. The devices showed symmetric, linear, and reversible modulation characteristics with many conductance states covering a 20× dynamic range. Thus, the space-time-energy performance of the all-solid-state artificial synapses can greatly exceed that of their biological counterparts.

Control of nucleation sites is an important goal in materials growth: nuclei in regular arrays may show emergent photonic or electronic behavior, and once the nuclei coalesce into thin films, the nucleation density influences parameters such as surface roughness, stress, and grain boundary structure. Tailoring substrate properties to control nucleation is therefore a powerful tool for designing functional thin films and nanomaterials. Here, we examine nucleation control for metals deposited on two-dimensional materials in a situation where substrate effects are absent and heterogeneous nucleation sites are minimized. Through quantification of faceted, epitaxial Au island nucleation on graphene, we show that ultralow nucleation densities with nuclei several micrometers apart can be achieved on suspended graphene under conditions where we measure 2-3 orders of magnitude higher nucleation density on the adjacent supported substrate. We estimate diffusion distances using nucleation theory and find a strong sensitivity of nucleation and diffusion to suspended graphene thickness. Finally, we discuss the role of surface roughness as the main factor determining nucleation density on clean free-standing graphene.

Understanding structure at the interface between two-dimensional (2D) materials and 3D metals is crucial for designing novel 2D/3D heterostructures and improving the performance of many 2D material devices. Here, we quantify and discuss the 2D/3D interface structure and the 3D morphology in several materials systems. We first deposit faceted Au nanoislands on graphene and transition metal dichalcogenides, using measurements of the equilibrium island shape to determine values for the 2D/Au interface energy and examining the role of surface reconstructions, chemical identity, and defects on the grown structures. We then deposit the technologically relevant metals Ti and Nb under conditions where kinetic rather than thermodynamic factors govern growth. We describe a transition from dendritic to faceted islands as a function of growth temperature and discuss the factors determining island shape in these materials systems. Finally, we show that suspended 2D materials enable the fabrication of a novel type of 3D/2D/3D heterostructure and discuss the growth mechanism. We suggest that emerging nanodevices will utilize versatile fabrication of 2D/3D heterostructures with well-characterized interfaces and morphologies.

The atomic structure at the interface between two-dimensional (2D) and three-dimensional (3D) materials influences properties such as contact resistance, photo-response, and high-frequency electrical performance. Moiré engineering is yet to be utilized for tailoring this 2D/3D interface, despite its success in enabling correlated physics at 2D/2D interfaces. Using epitaxially aligned MoS 2 /Au{111} as a model system, we demonstrate the use of advanced scanning transmission electron microscopy (STEM) combined with a geometric convolution technique in imaging the crystallographic 32 Å moiré pattern at the 2D/3D interface. This moiré period is often hidden in conventional electron microscopy, where the Au structure is seen in projection. We show, via ab initio electronic structure calculations, that charge density is modulated according to the moiré period, illustrating the potential for (opto-)electronic moiré engineering at the 2D/3D interface. Our work presents a general pathway to directly image periodic modulation at interfaces using this combination of emerging microscopy techniques.

The ability to vary the temperature of an electrochemical cell provides opportunities to control reaction rates and pathways and to drive processes that are inaccessible at ambient temperature. Here, we explore the effect of temperature on electrochemical etching of Ni-Pt bimetallic nanoparticles. To observe the process at nanoscale resolution we use liquid cell transmission electron microscopy with a modified liquid cell that enables simultaneous heating and biasing. By controlling the cell temperature, we demonstrate that the reaction rate and dissolution potential of the electrochemical Ni etching process can be changed. The in situ measurements suggest that the destabilization of the native nickel oxide layer is the slow step prior to subsequent fast Ni removal in the electrochemical Ni dissolution process. These experiments highlight the importance of in situ structural characterization under electrochemical and thermal conditions as a strategy to provide deeper insights into nanomaterial transformations as a function of temperature and potential., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Background: Convalescent plasma is frequently administered to patients with Covid-19 and has been reported, largely on the basis of observational data, to improve clinical outcomes. Minimal data are available from adequately powered randomized, controlled trials., Methods: We randomly assigned hospitalized adult patients with severe Covid-19 pneumonia in a 2:1 ratio to receive convalescent plasma or placebo. The primary outcome was the patient's clinical status 30 days after the intervention, as measured on a six-point ordinal scale ranging from total recovery to death., Results: A total of 228 patients were assigned to receive convalescent plasma and 105 to receive placebo. The median time from the onset of symptoms to enrollment in the trial was 8 days (interquartile range, 5 to 10), and hypoxemia was the most frequent severity criterion for enrollment. The infused convalescent plasma had a median titer of 1:3200 of total SARS-CoV-2 antibodies (interquartile range, 1:800 to 1:3200). No patients were lost to follow-up. At day 30 day, no significant difference was noted between the convalescent plasma group and the placebo group in the distribution of clinical outcomes according to the ordinal scale (odds ratio, 0.83; 95% confidence interval [CI], 0.52 to 1.35; P = 0.46). Overall mortality was 10.96% in the convalescent plasma group and 11.43% in the placebo group, for a risk difference of -0.46 percentage points (95% CI, -7.8 to 6.8). Total SARS-CoV-2 antibody titers tended to be higher in the convalescent plasma group at day 2 after the intervention. Adverse events and serious adverse events were similar in the two groups., Conclusions: No significant differences were observed in clinical status or overall mortality between patients treated with convalescent plasma and those who received placebo. (PlasmAr ClinicalTrials.gov number, NCT04383535.)., (Copyright © 2020 Massachusetts Medical Society.)

The exploration of unconventional catalysts for the vapor-liquid-solid synthesis of one-dimensional materials promises to yield new morphologies and functionality. Here, we show, for the model ZnO system, that unusual nanostructures can be produced via a semiconductor (Ge) catalyst. As well as the usual straight nanowires, we describe two other distinct morphologies: twisted nanowires and twisted nanotubes. The twisted nanotubes show large hollow cores and surprisingly high twisting rates, up to 9°/μm, that cannot be easily explained through the Eshelby twist model. A combination of ex situ and in situ transmission electron microscopy measurements suggest that the hollow core results from a competition between growth and etching at the Ge-ZnO interface during synthesis. The twisting rate is consistent with a softening of elastic rigidity. These results indicate that the use of unconventional, nonmetallic catalysts provides opportunities to synthesize unusual oxide nanostructures with potentially useful properties.

Correlating the structure and composition of nanowires grown by the vapour-liquid-solid (VLS) mechanism with their electrical properties is essential for designing nanowire devices. In situ transmission electron microscopy (TEM) that can image while simultaneously measuring the current-voltage (I-V) characteristics of individual isolated nanowires is a unique tool for linking changes in structure with electronic transport. Here we grow and electrically connect silicon nanowires inside a TEM to perform in situ electrical measurements on individual nanowires both at high temperature and upon surface oxidation, as well as under ambient conditions. As-grown, the oxide-free nanowires have nonlinear I-V characteristics. We analyse the I-V measurements in terms of both bulk and injection limited transport models, finding Joule heating effects, bulk-limiting effects for thin nanowires and an injection-limiting effect for thick wires when high voltages are applied. When the nanowire surface is modified by in situ oxidation, drastic changes occur in the electronic properties. We investigate the relation between the observed geometry, changes in the surface structure and changes in electronic transport, obtaining information for individual nanowires that is inaccessible to other measuring techniques.

Graphene p-n junctions offer a potentially powerful approach toward controlling electron trajectories via collimation and focusing in ballistic solid-state devices. The ability of p-n junctions to control electron trajectories depends crucially on the doping profile and roughness of the junction. Here, we use four-probe scanning tunneling microscopy and spectroscopy (STM/STS) to characterize two state-of-the-art graphene p-n junction geometries at the atomic scale, one with CMOS polySi gates and another with naturally cleaved graphite gates. Using spectroscopic imaging, we characterize the local doping profile across and along the p-n junctions. We find that realistic junctions exhibit non-ideality both in their geometry as well as in the doping profile across the junction. We show that the geometry of the junction can be improved by using the cleaved edge of van der Waals metals such as graphite to define the junction. We quantify the geometric roughness and doping profiles of junctions experimentally and use these parameters in non-equilibrium Green's function-based simulations of focusing and collimation in these realistic junctions. We find that for realizing Veselago focusing, it is crucial to minimize lateral interface roughness which only natural graphite gates achieve and to reduce junction width, in which both devices under investigation underperform. We also find that carrier collimation is currently limited by the non-linearity of the doping profile across the junction. Our work provides benchmarks of the current graphene p-n junction quality and provides guidance for future improvements.

In situ transmission electron microscopy reveals that an atomically thin crystalline phase at the surface of liquid Au-Si is stable over an unexpectedly wide range of conditions. By measuring the surface structure as a function of liquid temperature and composition, a simple thermodynamic model is developed to explain the stability of the ordered phase. The presence of surface ordering plays a key role in the pathway by which the Au-Si eutectic solidifies and also dramatically affects the catalytic properties of the liquid, explaining the anomalously slow growth kinetics of Si nanowires at low temperature. A strategy to control the presence of the surface phase is discussed, using it as a tool in designing strategies for nanostructure growth., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The original version of this Article contained an error in the spelling of a member of the PRACTICAL Consortium, Manuela Gago-Dominguez, which was incorrectly given as Manuela Gago Dominguez. This has now been corrected in both the PDF and HTML versions of the Article. Furthermore, in the original HTML version of this Article, the order of authors within the author list was incorrect. The PRACTICAL consortium was incorrectly listed after Richard S. Houlston and should have been listed after Nora Pashayan. This error has been corrected in the HTML version of the Article; the PDF version was correct at the time of publication.

Formation mechanisms of dendrite structures have been extensively explored theoretically, and many theoretical predictions have been validated for micro- or macroscale dendrites. However, it is challenging to determine whether classical dendrite growth theories are applicable at the nanoscale due to the lack of detailed information on the nanodendrite growth dynamics. Here, we study iron oxide nanodendrite formation using liquid cell transmission electron microscopy (TEM). We observe "seaweed"-like iron oxide nanodendrites growing predominantly in two dimensions on the membrane of a liquid cell. By tracking the trajectories of their morphology development with high spatial and temporal resolution, it is possible to explore the relationship between the tip curvature and growth rate, tip splitting mechanisms, and the effects of precursor diffusion and depletion on the morphology evolution. We show that the growth of iron oxide nanodendrites is remarkably consistent with the existing theoretical predictions on dendritic morphology evolution during growth, despite occurring at the nanoscale.

Genome-wide association studies (GWAS) have transformed our understanding of susceptibility to multiple myeloma (MM), but much of the heritability remains unexplained. We report a new GWAS, a meta-analysis with previous GWAS and a replication series, totalling 9974 MM cases and 247,556 controls of European ancestry. Collectively, these data provide evidence for six new MM risk loci, bringing the total number to 23. Integration of information from gene expression, epigenetic profiling and in situ Hi-C data for the 23 risk loci implicate disruption of developmental transcriptional regulators as a basis of MM susceptibility, compatible with altered B-cell differentiation as a key mechanism. Dysregulation of autophagy/apoptosis and cell cycle signalling feature as recurrently perturbed pathways. Our findings provide further insight into the biological basis of MM.

We show that templating a Si surface with a focused beam of Si 2+ or Si + ions can create suitable nucleation sites for the subsequent growth of self-assembled Ge quantum dots by chemical vapor deposition. To determine the mechanism of patterning we use atomic force microscopy to show that, similar to Ga + patterning, the formation of a surface pit is required to enable control over Ge quantum dot locations. We find that relatively high implantation doses are required to achieve patterning, and these doses lead to amorphization of the substrate. We assess the degree to which the substrate crystallinity can be recovered by subsequent processing. Using in situ transmission electron microscopy heating experiments we find that recrystallization is possible at the growth temperature of the Ge quantum dots, but defects remain that follow the pattern of the initial implantation. We discuss the formation mechanism of the defects and the benefits of using Si ions for patterning both defects and quantum dots on Si substrates.

The use of liquid cell electron microscopy as a quantitative probe of nanomaterial structures and reactions requires an accurate understanding of how the sample is altered by the imaging electron beam. In particular, changes in the chemical environment due to beam-induced radiolysis can strongly affect processes such as solution-phase nanocrystal synthesis or electrochemical deposition. It is generally assumed that beam effects are uniform throughout the irradiated liquid. Here we show that for a liquid cell filled with water, the inevitable presence of interfaces between water and the surrounding surfaces causes a spatial variation in the energy absorbed by the water near the walls. The mechanism for this effect is that the walls act as a source of secondary and backscattered electrons which diffuse and deposit energy in the water nearby. This increased dose rate then changes the local concentrations of radiolysis species. We quantify and compare the effects for different materials used in practical liquid cells. We show that the dose rate can increase by several times within tens of nanometers of a water/Au interface, locally increasing the concentrations of species such as the hydrated electron. We discuss the implications for materials processes that are typically triggered at the solid-liquid interface.

The performance of many electrochemical energy storage systems can be compromised by the formation of metal dendrites during charging. Additives in the electrolyte represent a useful strategy to mitigate dendrite formation, but understanding the mechanisms involved requires knowledge of the nanoscale effects of additives during electrochemical deposition. Here we quantify the effects of an inorganic additive on the morphology of an evolving electrochemical growth front, using liquid cell electron microscopy to provide the necessary spatial and temporal resolution. We examine deposition of ZnAu on Au in the presence of Bi additive, and show that low concentrations of Bi delay but do not prevent the formation of growth front instabilities. We describe a model in which Bi segregates at the growth front and promotes the surface diffusion and relaxation of Zn, allowing better coverage of the initial Au electrode surface. A more precise knowledge of the mechanism of inorganic additive effects may help in designing electrolyte chemistry for battery and other applications where morphology control is essential.

Control of interfacial morphology in electrochemical processes is essential for applications ranging from nanomanufacturing to batteries. Here, we quantify the evolution of an electrochemical growth front, using liquid cell electron microscopy to access unexplored length and time scales. During galvanostatic deposition of copper from an acidic electrolyte, we find that the growth front initially evolves consistent with kinetic roughening theory. Subsequently, it roughens more rapidly, consistent with diffusion-limited growth physics. However, the onset of roughening is strongly delayed compared to expectations, suggesting the importance of lateral diffusion of ions. Based on these growth regimes, we discuss morphological control and demonstrate the effects of two strategies, pulse plating and the use of electrolyte additives.

Manufacturable nanodevices must now be the predominant goal of nanotechnological research to ensure the enhanced properties of nanomaterials can be fully exploited and fulfill the promise that fundamental science has exposed. Here, we test the electrical stability of Au nanocatalyst-ZnO nanowire contacts to determine the limits of the electrical transport properties and the metal-semiconductor interfaces. While the transport properties of as-grown Au nanocatalyst contacts to ZnO nanowires have been well-defined, the stability of the interfaces over lengthy time periods and the electrical limits of the ohmic or Schottky function have not been studied. In this work, we use a recently developed iterative analytical process that directly correlates multiprobe transport measurements with subsequent aberration-corrected scanning transmission electron microscopy to study the electrical, structural, and chemical properties when the nanowires are pushed to their electrical limits and show structural changes occur at the metal-nanowire interface or at the nanowire midshaft. The ohmic contacts exhibit enhanced quantum-mechanical edge-tunneling transport behavior because of additional native semiconductor material at the contact edge due to a strong metal-support interaction. The low-resistance nature of the ohmic contacts leads to catastrophic breakdown at the middle of the nanowire span where the maximum heating effect occurs. Schottky-type Au-nanowire contacts are observed when the nanowires are in the as-grown pristine state and display entirely different breakdown characteristics. The higher-resistance rectifying I-V behavior degrades as the current is increased which leads to a permanent weakening of the rectifying effect and atomic-scale structural changes at the edge of the Au interface where the tunneling current is concentrated. Furthermore, to study modified nanowires such as might be used in devices the nanoscale tunneling path at the interface edge of the ohmic nanowire contacts is removed with a simple etch treatment and the nanowires show similar I-V characteristics during breakdown as the Schottky pristine contacts. Breakdown is shown to occur either at the nanowire midshaft or at the Au contact depending on the initial conductivity of the Au contact interface. These results demonstrate the Au-nanowire structures are capable of withstanding long periods of electrical stress and are stable at high current densities ensuring they are ideal components for nanowire-device designs while providing the flexibility of choosing the electrical transport properties which other Au-nanowire systems cannot presently deliver.

We develop a solution-based nanoscale patterning technique for site-specific deposition and dissolution of metallic nanocrystals. Nanocrystals are grown at desired locations by electron beam-induced reduction of metal ions in solution, with the ions supplied by dissolution of a nearby electrode via an applied potential. The nanocrystals can be "erased" by choice of beam conditions and regrown repeatably. We demonstrate these processes via in situ transmission electron microscopy using Au as the model material and extend to other metals. We anticipate that this approach can be used to deposit multicomponent alloys and core-shell nanostructures with nanoscale spatial and compositional resolutions for a variety of possible applications.

Graphene epitaxy on the Si face of a SiC wafer offers monolayer graphene with unique crystal orientation at the wafer-scale. However, due to carrier scattering near vicinal steps and excess bilayer stripes, the size of electrically uniform domains is limited to the width of the terraces extending up to a few microns. Nevertheless, the origin of carrier scattering at the SiC vicinal steps has not been clarified so far. A layer-resolved graphene transfer (LRGT) technique enables exfoliation of the epitaxial graphene formed on SiC wafers and transfer to flat Si wafers, which prepares crystallographically single-crystalline monolayer graphene. Because the LRGT flattens the deformed graphene at the terrace edges and permits an access to the graphene formed at the side wall of vicinal steps, components that affect the mobility of graphene formed near the vicinal steps of SiC could be individually investigated. Here, we reveal that the graphene formed at the side walls of step edges is pristine, and scattering near the steps is mainly attributed by the deformation of graphene at step edges of vicinalized SiC while partially from stripes of bilayer graphene. This study suggests that the two-step LRGT can prepare electrically single-domain graphene at the wafer-scale by removing the major possible sources of electrical degradation., Competing Interests: The authors declare no conflict of interest.

Semiconductor nanowires with precisely controlled structure, and hence well-defined electronic and optical properties, can be grown by self-assembly using the vapour-liquid-solid process. The structure and chemical composition of the growing nanowire is typically determined by global parameters such as source gas pressure, gas composition and growth temperature. Here we describe a more local approach to the control of nanowire structure. We apply an electric field during growth to control nanowire diameter and growth direction. Growth experiments carried out while imaging within an in situ transmission electron microscope show that the electric field modifies growth by changing the shape, position and contact angle of the catalytic droplet. This droplet engineering can be used to modify nanowires into three dimensional structures, relevant to a range of applications, and also to measure the droplet surface tension, important for quantitative development of strategies to control nanowire growth.

Multiple myeloma (MM) is a plasma cell malignancy with a significant heritable basis. Genome-wide association studies have transformed our understanding of MM predisposition, but individual studies have had limited power to discover risk loci. Here we perform a meta-analysis of these GWAS, add a new GWAS and perform replication analyses resulting in 9,866 cases and 239,188 controls. We confirm all nine known risk loci and discover eight new loci at 6p22.3 (rs34229995, P=1.31 × 10(-8)), 6q21 (rs9372120, P=9.09 × 10(-15)), 7q36.1 (rs7781265, P=9.71 × 10(-9)), 8q24.21 (rs1948915, P=4.20 × 10(-11)), 9p21.3 (rs2811710, P=1.72 × 10(-13)), 10p12.1 (rs2790457, P=1.77 × 10(-8)), 16q23.1 (rs7193541, P=5.00 × 10(-12)) and 20q13.13 (rs6066835, P=1.36 × 10(-13)), which localize in or near to JARID2, ATG5, SMARCD3, CCAT1, CDKN2A, WAC, RFWD3 and PREX1. These findings provide additional support for a polygenic model of MM and insight into the biological basis of tumour development.

We visualize atomic level dynamics during Si nanowire growth using aberration corrected environmental transmission electron microscopy, and compare with lower pressure results from ultra-high vacuum microscopy. We discuss the importance of higher pressure observations for understanding growth mechanisms and describe protocols to minimize effects of the higher pressure background gas.

Controlled formation of non-equilibrium crystal structures is one of the most important challenges in crystal growth. Catalytically grown nanowires are ideal systems for studying the fundamental physics of phase selection, and could lead to new electronic applications based on the engineering of crystal phases. Here we image gallium arsenide (GaAs) nanowires during growth as they switch between phases as a result of varying growth conditions. We find clear differences between the growth dynamics of the phases, including differences in interface morphology, step flow and catalyst geometry. We explain these differences, and the phase selection, using a model that relates the catalyst volume, the contact angle at the trijunction (the point at which solid, liquid and vapour meet) and the nucleation site of each new layer of GaAs. This model allows us to predict the conditions under which each phase should be observed, and use these predictions to design GaAs heterostructures. These results could apply to phase selection in other nanowire systems.

Transmission electron microscopy offers structural and compositional information with atomic resolution, but its use is restricted to thin, solid samples. Liquid samples, particularly those involving water, have been challenging because of the need to form a thin liquid layer that is stable within the microscope vacuum. Liquid cell electron microscopy is a developing technique that allows us to apply the powerful capabilities of the electron microscope to imaging and analysis of liquid specimens. We describe its impact in materials science and biology. We discuss how its applications have expanded via improvements in equipment and experimental techniques, enabling new capabilities and stimuli for samples in liquids, and offering the potential to solve grand challenge problems., (Copyright © 2015, American Association for the Advancement of Science.)

In situ transmission electron microscopy observations of nanowire morphologies indicate that during Au-catalyzed Ge nanowire growth, Ge facets can rapidly form along the nanowire sidewalls when the source gas (here, digermane) flux is decreased or the temperature is increased. This sidewall faceting is accompanied by continuous catalyst loss as Au diffuses from the droplet to the wire surface. We suggest that high digermane flux and low temperatures promote effective surface passivation of Ge nanowires with H or other digermane fragments inhibiting diffusion and attachment of Au and Ge on the sidewalls. These results illustrate the essential roles of the precursor gas and substrate temperature in maintaining nanowire sidewall passivation, necessary to ensure the growth of straight, untapered, ⟨111⟩-oriented nanowires.

The formation of self-assembled contacts between vapor-liquid-solid grown silicon nanowires and flat silicon surfaces was imaged in situ using electron microscopy. By measuring the structural evolution of the contact formation process, we demonstrate how different contact geometries are created by adjusting the balance between silicon deposition and Au migration. We show that electromigration provides an efficient way of controlling the contact. The results point to novel device geometries achieved by direct nanowire growth on devices.

Measurements of solution-phase crystal growth provide mechanistic information that is helpful in designing and synthesizing nanostructures. Here, we examine the model system of individual Au nanocrystal formation within a defined liquid geometry during electron beam irradiation of gold chloride solution, where radiolytically formed hydrated electrons reduce Au ions to solid Au. By selecting conditions that favor the growth of well-faceted Au nanoprisms, we measure growth rates of individual crystals. The volume of each crystal increases linearly with irradiation time at a rate unaffected by its shape or proximity to neighboring crystals, implying a growth process that is controlled by the arrival of atoms from solution. Furthermore, growth requires a threshold dose rate, suggesting competition between reduction and oxidation processes in the solution. Above this threshold, the growth rate follows a power law with dose rate. To explain the observed dose rate dependence, we demonstrate that a reaction-diffusion model is required that explicitly accounts for the species H(+) and Cl(-). The model highlights the necessity of considering all species present when interpreting kinetic data obtained from beam-induced processes, and suggest conditions under which growth rates can be controlled with higher precision.

Nanowire growth by the vapour-liquid-solid (VLS) process enables a high level of control over nanowire composition, diameter, growth direction, branching and kinking, periodic twinning, and crystal structure. The tremendous impact of VLS-grown nanowires is due to this structural versatility, generating applications ranging from solid-state lighting and single-photon sources to thermoelectric devices. Here, we show that the morphology of these nanostructures can be further tailored by using the liquid droplets that catalyse nanowire growth as a 'mixing bowl', in which growth materials are sequentially supplied to nucleate new phases. Growing within the liquid, these phases adopt the shape of faceted nanocrystals that are then incorporated into the nanowires by further growth. We demonstrate this concept by epitaxially incorporating metal-silicide nanocrystals into Si nanowires with defect-free interfaces, and discuss how this process can be generalized to create complex nanowire-based heterostructures.

The formation of abrupt Si/Ge heterointerfaces in nanowires presents useful possibilities for bandgap engineering. We grow Si nanowires containing thick Ge layers and sub-1 nm thick Ge "quantum wells" and measure the interfacial strain fields using geometric phase analysis. Narrow Ge layers show radial compressive strains of several percent, while stress at the Si/Ge interface causes lattice rotation. High strains can be achieved in these heterostructures, but we show that they are unstable to interdiffusion.

Risk stratification in myeloma requires an accurate assessment of the presence of a range of molecular abnormalities including the differing IGH translocations and the recurrent copy number abnormalities that can impact clinical behavior. Currently, interphase fluorescence in situ hybridization is used to detect these abnormalities. High failure rates, slow turnaround, cost, and labor intensiveness make it difficult and expensive to use in routine clinical practice. Multiplex ligation-dependent probe amplification (MLPA), a molecular approach based on a multiplex polymerase chain reaction method, offers an alternative for the assessment of copy number changes present in the myeloma genome. Here, we provide evidence showing that MLPA is a powerful tool for the efficient detection of copy number abnormalities and when combined with expression assays, MLPA can detect all of the prognostically relevant molecular events which characterize presenting myeloma. This approach opens the way for a molecular diagnostic strategy that is efficient, high throughput, and cost effective., (© 2014 The Authors. Genes, Chromosomes & Cancer Published by Wiley Periodicals, Inc.)

The acquisition of the cytogenetic abnormalities hyperdiploidy or translocations into the immunoglobulin gene loci are considered as initiating events in the pathogenesis of myeloma and were often assumed to be mutually exclusive. These lesions have clinical significance; hyperdiploidy or the presence of the t(11;14) translocation is associated with a favorable outcome, whereas t(4;14), t(14;16), and t(14;20) are unfavorable. Poor outcomes are magnified when lesions occur in association with other high-risk features, del17p and +1q. Some patients have coexistence of both good and poor prognostic lesions, and there has been no consensus on their risk status. To address this, we have investigated their clinical impact using cases in the Myeloma IX study (ISRCTN68454111) and shown that the coexistence of hyperdiploidy or t(11;14) does not abrogate the poor prognosis associated with adverse molecular lesions, including translocations. We have also used single-cell analysis to study cases with coexistent translocations and hyperdiploidy to determine how these lesions cosegregate within the clonal substructure, and we have demonstrated that hyperdiploidy may precede IGH translocation in a proportion of patients. These findings have important clinical and biological implications, as we conclude patients with coexistence of adverse lesions and hyperdiploidy should be considered high risk and treated accordingly., (© 2015 by The American Society of Hematology.)

Localized corrosion of Cu and Al thin films exposed to aqueous NaCl solutions was studied using liquid cell transmission electron microscopy (LCTEM). We demonstrate that potentiostatic control can be used to initiate pitting and that local compositional changes, due to focused ion beam implantation of Au(+) ions, can modify the corrosion susceptibility of Al films.

The motion of Au between AuSi liquid eutectic droplets, both before and during vapor-liquid-solid growth, is important in controlling tapering and diameter uniformity in Si nanowires. We measure the kinetics of coarsening of AuSi droplets on Si(001) and Si(111), quantifying the size evolution of droplets during annealing in ultrahigh vacuum using in situ transmission electron microscopy. For individual droplets, we show that coarsening kinetics are modified when disilane or oxygen is added: coarsening rates increase in the presence of disilane but decrease in oxygen. Matching droplet size measurements on Si(001) with coarsening models confirms that Au transport is driven by capillary forces and that the kinetic coefficients depend on the gas environment present. We suggest that the gas effects are qualitatively similar whether transport is attachment limited or diffusion limited. These results provide insight into manipulating nanowire morphologies for advanced device fabrication.

Nanowire growth is generally considered a steady-state process, but oscillatory phenomena are known to often play a fundamental role. Here we identify a natural sequence of distinct growth modes, in two of which the catalyst droplet jumps periodically on and off a crystal facet. The oscillatory modes result from a mismatch between catalyst size and wire diameter; they enable growth of straight smooth-sided wires even when the droplet is too small to span the wire tip. Jumping-catalyst growth modes are seen both in computer simulations of vapor-liquid-solid growth, and in movies of Si nanowire growth obtained by in situ microscopy. Our simulations also provide new insight into nanowire kinking.

For the first time, it is demonstrated that nanoscale HfO2 surface passivation layers formed by atomic layer deposition (ALD) significantly improve the performance of Li ion batteries with SnO2 -based anodes. Specifically, the measured battery capacity at a current density of 150 mAg(-1) after 100 cycles is 548 and 853 mAhg(-1) for the uncoated and HfO2 -coated anodes, respectively. Material analysis reveals that the HfO2 layers are amorphous in nature and conformably coat the SnO2 -based anodes. In addition, the analysis reveals that ALD HfO2 not only protects the SnO2 -based anodes from irreversible reactions with the electrolyte and buffers its volume change, but also chemically interacts with the SnO2 anodes to increase battery capacity, despite the fact that HfO2 is itself electrochemically inactive. The amorphous nature of HfO2 is an important factor in explaining its behavior, as it still allows sufficient Li diffusion for an efficient anode lithiation/delithiation process to occur, leading to higher battery capacity., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Bisphosphonates are recommended in patients with osteolytic lesions secondary to multiple myeloma. We report on the safety of bisphosphonate therapy with long-term follow-up in the Medical Research Council Myeloma IX study. Patients with newly diagnosed multiple myeloma were randomised to zoledronic acid (ZOL; 4 mg intravenously every 21-28 d) or clodronate (CLO; 1600 mg/d orally) plus chemotherapy. Among 1960 patients (5.9-year median follow-up), both bisphosphonates were well tolerated. Acute renal failure events were similar between groups (ZOL 5.2% vs. CLO 5.8% at 2 years; incidence plateaued thereafter). The overall incidence of confirmed osteonecrosis of the jaw (ONJ) was low, but higher with ZOL (ZOL 3.7% vs. CLO 0.5%; P < 0.0001). ONJ events were generally low grade and most occurred between 8 and 30 months (median time to ONJ, 23.7 months). Among 10 patients with ONJ recovery data, four patients in the ZOL group completely recovered, two patients improved, and three patients experienced no improvement; one CLO patient experienced no improvement. Dental surgery or trauma preceded ONJ in six ZOL patients. The incidence of renal adverse events was similar for ZOL and CLO. ONJ incidence remained low and was lower with CLO compared to ZOL. We have seen no further ONJ cases to date., (© 2014 John Wiley & Sons Ltd.)

Changes in gene dosage are a major driver of cancer, known to be caused by a finite, but increasingly well annotated, repertoire of mutational mechanisms. This can potentially generate correlated copy-number alterations across hundreds of linked genes, as exemplified by the 2% of childhood acute lymphoblastic leukaemia (ALL) with recurrent amplification of megabase regions of chromosome 21 (iAMP21). We used genomic, cytogenetic and transcriptional analysis, coupled with novel bioinformatic approaches, to reconstruct the evolution of iAMP21 ALL. Here we show that individuals born with the rare constitutional Robertsonian translocation between chromosomes 15 and 21, rob(15;21)(q10;q10)c, have approximately 2,700-fold increased risk of developing iAMP21 ALL compared to the general population. In such cases, amplification is initiated by a chromothripsis event involving both sister chromatids of the Robertsonian chromosome, a novel mechanism for cancer predisposition. In sporadic iAMP21, breakage-fusion-bridge cycles are typically the initiating event, often followed by chromothripsis. In both sporadic and rob(15;21)c-associated iAMP21, the final stages frequently involve duplications of the entire abnormal chromosome. The end-product is a derivative of chromosome 21 or the rob(15;21)c chromosome with gene dosage optimized for leukaemic potential, showing constrained copy-number levels over multiple linked genes. Thus, dicentric chromosomes may be an important precipitant of chromothripsis, as we show rob(15;21)c to be constitutionally dicentric and breakage-fusion-bridge cycles generate dicentric chromosomes somatically. Furthermore, our data illustrate that several cancer-specific mutational processes, applied sequentially, can coordinate to fashion copy-number profiles over large genomic scales, incrementally refining the fitness benefits of aggregated gene dosage changes.

One of the fundamental challenges in understanding the early stages of corrosion pitting in metals protected with an oxide film is that there are relatively few techniques that can probe microstructure with sufficient resolution while maintaining a wet environment. Here, we demonstrate that microstructural changes in Al thin films caused by aqueous NaCl solutions of varying chloride concentrations can be directly observed using a liquid flow cell enclosed within a transmission electron microscope (TEM) holder. In the absence of chloride, Al thin films did not exhibit significant corrosion when immersed in de-ionized water for 2 days. However, introducing 0.01 M NaCl solutions led to extensive random formation of blisters over the sample surface, while 0.1 M NaCl solutions formed anomalous structures that were larger than the typical grain size. Immersion in 1.0 M NaCl solutions led to fractal corrosion consistent with previously reported studies of Al thin films using optical microscopy. These results show the potential of in situ liquid cell electron microscopy for probing the processes that take place before the onset of pitting and for correlating pit locations with the underlying microstructure of the material.

Secondary MYC translocations in myeloma have been shown to be important in the pathogenesis and progression of disease. Here, we have used a DNA capture and massively parallel sequencing approach to identify the partner chromosomes in 104 presentation myeloma samples. 8q24 breakpoints were identified in 21 (20%) samples with partner loci including IGH, IGK and IGL, which juxtapose the immunoglobulin (Ig) enhancers next to MYC in 8/23 samples. The remaining samples had partner loci including XBP1, FAM46C, CCND1 and KRAS, which are important in B-cell maturation or myeloma pathogenesis. Analysis of the region surrounding the breakpoints indicated the presence of superenhancers on the partner chromosomes and gene expression analysis showed increased expression of MYC in these samples. Patients with MYC translocations had a decreased progression-free and overall survival. We postulate that translocation breakpoints near MYC result in colocalization of the gene with superenhancers from loci, which are important in the development of the cell type in which they occur. In the case of myeloma these are the Ig loci and those important for plasma cell development and myeloma pathogenesis, resulting in increased expression of MYC and an aggressive disease phenotype.

In the growth of nanoscale device structures, the ultimate goal is atomic-level precision. By growing III-V nanowires in a transmission electron microscope, we measured the local kinetics in situ as each atomic plane was added at the catalyst-nanowire growth interface by the vapor-liquid-solid process. During growth of gallium phosphide nanowires at typical V/III ratios, we found surprising fluctuations in growth rate, even under steady growth conditions. We correlated these fluctuations with the formation of twin defects in the nanowire, and found that these variations can be suppressed by switching to growth conditions with a low V/III ratio. We derive a growth model showing that this unexpected variation in local growth kinetics reflects the very different supply pathways of the V and III species. The model explains under which conditions the growth rate can be controlled precisely at the atomic level.

Liquid cell electron microscopy has emerged as a powerful technique for in situ studies of nanoscale processes in liquids. An accurate understanding of the interactions between the electron beam and the liquid medium is essential to account for, suppress, and exploit beam effects. We quantify the interactions of high energy electrons with water, finding that radiolysis plays an important role, while heating is typically insignificant. For typical imaging conditions, we find that radiolysis products such as hydrogen and hydrated electrons achieve equilibrium concentrations within seconds. At sufficiently high dose-rate, the gaseous products form bubbles. We image bubble nucleation, growth, and migration. We develop a simplified reaction-diffusion model for the temporally and spatially varying concentrations of radiolysis species and predict the conditions for bubble formation by H2. We discuss the conditions under which hydrated electrons cause precipitation of cations from solution and show that the electron beam can be used to "write" structures directly, such as nanowires and other complex patterns, without the need for a mask.

Purpose: Medical Research Council (MRC) Myeloma IX was a phase III trial evaluating bisphosphonate and thalidomide-based therapy for newly diagnosed multiple myeloma. Results were reported previously after a median follow-up of 3.7 years (current controlled trials number: ISRCTN68454111). Survival outcomes were reanalyzed after an extended follow-up (median, 5.9 years)., Experimental Design: At first randomization, patients (N = 1,970) were assigned to bisphosphonate (clodronic acid or zoledronic acid) and induction therapies [cyclophosphamide-vincristine-doxorubicin-dexamethasone (CVAD) or cyclophosphamide-thalidomide-dexamethasone (CTD) followed by high-dose therapy plus autologous stem cell transplantation for younger/fitter patients (intensive pathway), and melphalan-prednisone (MP) or attenuated CTD (CTDa) for older/less fit patients (nonintensive pathway)]. At second randomization, patients were assigned to thalidomide maintenance therapy or no maintenance. Interphase FISH (iFISH) was used to analyze cytogenics., Results: Zoledronic acid significantly improved progression-free survival (PFS; HR, 0.89; P = 0.02) and overall survival (OS; HR, 0.86; P = 0.01) compared with clodronic acid. In the intensive pathway, CTD showed noninferior PFS and OS compared with CVAD, with a trend toward improved OS in patients with favorable cytogenics (P = 0.068). In the nonintensive pathway, CTDa significantly improved PFS (HR, 0.81; P = 0.007) compared with MP and there was an emergent survival benefit after 18 to 24 months. Thalidomide maintenance improved PFS (HR, 1.44; P < 0.0001) but not OS (HR, 0.96; P = 0.70), and was associated with shorter OS in patients with adverse cytogenics (P = 0.01)., Conclusions: Long-term follow-up is essential to identify clinically meaningful treatment effects in myeloma subgroups based on cytogenetics.