Search

Dinitrogen adsorption on overexchanged Cu-ZSM-5 is examined at 302 K by diffuse reflectance infrared spectroscopy, N2-adsorption isotherms and tempertaure-programmed N2 desorption. The introduction of controlled amounts of impurities, together with the utilization of N(super 15)(sub 2) and CO(super 13) indicate that this band is instead related to hydrated Cu(*I)-CO species formed by accumulation on the sample of traces of H2O in the N2 flow.

Herein, the growth of substoichiometric tungsten oxide (WO3–x) nanowires (NWs) via thermal oxidation of W films (a few 10 to a few 100 nm thick) deposited by Ar‐plasma sputtering on fluorine‐doped tin oxide (FTO) substrates is reported. A thermal treatment at relatively low temperature (525–550 °C) in Ar at atmospheric pressure leads to the conversion of the W films into W suboxide (WO3–x) NW arrays. Such NWs have a length of ≈500 nm and their diameter ranges from 10 to 40 nm depending on the duration of the annealing process. These growth conditions for the formation of WO3–x NWs are significantly milder and more straightforward than those reported in previous literature. This avoids high temperatures (e.g., above 600 °C), vacuum conditions, or the addition of catalysts. A thermal‐oxidative approach of these sputtered films is suitable to directly form WO3–x NWs on various surfaces, including conductive substrates to fabricate photoelectrodes or large‐scale supports, e.g., for smart windows. [ABSTRACT FROM AUTHOR]

Pt nanoparticles are typically decorated as co‐catalyst on semiconductors to enhance the photocatalytic performance. Due to the low abundance and high cost of Pt, reaching a high activity with minimized co‐catalyst loadings is a key challenge in the field. We explore a dewetting‐dealloying strategy to fabricate on TiO2 nanotubes nanoporous Pt nanoparticles, aiming at improving the co‐catalyst mass activity for H2 generation. For this, we sputter first Pt‐Ni bi‐layers of controllable thickness (nm range) on highly ordered TiO2 nanotube arrays, and then induce dewetting‐alloying of the Pt‐Ni bi‐layers by a suitable annealing step in a reducing atmosphere: the thermal treatment causes the Pt and Ni films to agglomerate and at the same time mix with each other, forming on the TiO2 nanotube surface metal islands of a mixed PtNi composition. In a subsequent step we perform chemical dealloying of Ni that is selectively etched out from the bimetallic dewetted islands, leaving behind nanoporous Pt decorations. Under optimized conditions, the nanoporous Pt‐decorated TiO2 structures show a>6 times higher photocatalytic H2 generation activity compared to structures modified with a comparable loading of dewetted, non‐porous Pt. We ascribe this beneficial effect to the nanoporous nature of the dealloyed Pt co‐catalyst, which provides an increased surface‐to‐volume ratio and thus a more efficient electron transfer and a higher density of active sites at the co‐catalyst surface for H2 evolution. [ABSTRACT FROM AUTHOR]

Gold-decorated TiO2 nanotubes were used for the photocatalytic abatement of Hg(ii) in aqueous solutions. The presence of dewetted Au nanoparticles induces a strong enhancement of photocatalytic reduction and scavenging performances, with respect to naked TiO2. In the presence of chlorides, a massive formation of Hg2Cl2 nanowires, produced from Au nanoparticles, was observed using highly Au loaded photocatalysts to treat a 10 ppm Hg(ii) solution. EDS and XPS confirmed the nature of the photo-produced nanowires. In the absence of chlorides and/or at lower Hg(ii) starting concentrations, the scavenging of mercury proceeds through the formation of Hg–Au amalgams. Solar light driven Hg(ii) abatements up to 90% were observed after 24 h. ICP-MS analysis revealed that the removed Hg(ii) is accumulated on the photocatalyst surface. Regeneration of Hg-loaded exhaust photocatalysts was easily performed by anodic stripping of Hg(0) and Hg(i) to Hg(ii). After four catalytic-regeneration cycles, only a 10% decrease of activity was observed. [ABSTRACT FROM AUTHOR]