Search

To be accurate and equivalent, laboratory results should be traceable to higher-order references. Furthermore, their quality should fulfill acceptable measurement uncertainty as defined to fit the intended clinical use. With this aim, in vitro diagnostics (IVD) manufacturers should define a calibration hierarchy to assign traceable values to their system calibrators and to fulfill during this process uncertainty limits for calibrators, which should represent a proportion of the uncertainty budget allowed for clinical laboratory results. It is therefore important that, on one hand, the laboratory profession clearly defines the clinically acceptable uncertainty for relevant tests and, on the other hand, end-users may know and verify how manufacturers have implemented the traceability of their calibrators and estimated the corresponding uncertainty. Important tools for IVD traceability surveillance are quality control programmes through the daily verification by clinical laboratories that control materials of analytical systems are in the manufacturer's declared validation range [Internal Quality Control (IQ C) component I] and the organization of External Quality Assessment Schemes meeting metrological criteria. In a separate way, clinical laboratories should also monitor the reliability of employed commercial systems through the IQC component II, devoted to estimation of the measurement uncertainty due to random effects, which includes analytical system imprecision together with individual laboratory performance in terms of variability.

Analytical performance specifications, lot-to-lot variation, measurement uncertainty, method evaluation, CLSI-ep26 Keywords: analytical performance specifications; CLSI-ep26; lot-to-lot variation; measurement uncertainty; method evaluation EN analytical performance specifications CLSI-ep26 lot-to-lot variation measurement uncertainty method evaluation e218 e220 3 10/03/23 20231001 NES 231001 To the Editor, We appreciate the attention that Bayat et al. have paid to our paper proposing an approach for determining allowable between reagent lot variation [[1]]. [Extracted from the article]

IVD manufacturers have total responsibility in terms of the traceability of marketed in vitro diagnostic medical devices (IVD-MD). This includes the provision of a quality control (QC) material as a part of the measuring system, suitable for traceability verification and alignment surveillance by end-users in daily practice. This material [to be used for the internal QC (IQC) component I as described in this paper] should have unbiased target values and an acceptability range corresponding to analytical performance specifications (APS) for suitable (expanded) measurement uncertainty (MU) on clinical samples. On the other hand, medical laboratories (by the IQC component II as described in this paper) should improve the IQC process and its judging criteria to establish a direct link between their performance, estimated as MU of provided results, and APS defined according to recommended models to apply corrective actions if the performance is worsening with the risk to jeopardize the clinical validity of test results. The participation to external quality assessment (EQA) programs that meet specific metrological criteria is also central to the evaluation of performance of IVD-MDs and of medical laboratories in terms of harmonization and clinical suitability of their measurements. In addition to the use of commutable materials, in this type of EQA it is necessary to assign values to them with selected reference procedures and to define and apply maximum allowable APS to substantiate the suitability of laboratory measurements in the clinical setting. [ABSTRACT FROM AUTHOR]

Laboratories should estimate and validate [using analytical performance specifications (APS)] the measurement uncertainty (MU) of performed tests. It is therefore essential to appropriately define APS for MU, but also to provide a perspective on suitability of the practical application of these APS. In this study, 23 commonly ordered measurands were allocated to the models defined during the 2014 EFLM Strategic Conference to derive APS for MU. Then, we checked if the performance of commercial measuring systems used in our laboratory may achieve them. Most measurands (serum alkaline phosphatase, aspartate aminotransferase, creatine kinase, γ-glutamyltransferase, lactate dehydrogenase, pancreatic amylase, total proteins, immunoglobulin G, A, M, magnesium, urate, and prostate-specific antigen, plasma homocysteine, and blood red and white cells) were allocated to the biological variation (BV) model and desirable APS were defined accordingly (2.65%, 4.75%, 7.25%, 4.45%, 2.60%, 3.15%, 1.30%, 2.20%, 2.50%, 2.95%, 1.44%, 4.16%, 3.40%, 3.52%, 1.55%, and 5.65%, respectively). Desirable APS for serum total cholesterol (3.00%) and urine albumin (9.00%) were derived using outcome-based model. Lacking outcome-based information, serum albumin, high-density lipoprotein cholesterol, triglycerides, and blood platelets were temporarily reallocated to BV model, the corresponding desirable APS being 1.25%, 2.84%, 9.90%, and 4.85%, respectively. A mix between the two previous models was employed for serum digoxin, with a 6.00% desirable APS. In daily practice by using our laboratory systems, 16 tests fulfilled desirable and five minimum APS, while two (serum albumin and plasma homocysteine) exceeded goals, needing improvements. [ABSTRACT FROM AUTHOR]

In the recent years, new CRP candidate reference materials (RM) were nominated to be listed in the Joint Committee for Traceability in Laboratory Medicine (JCTLM) database. In other words, it was unclear if the new CRP candidate RM providers proposed an alternative calibration hierarchy to that currently used in the clinical community, already listed on the JCTLM database [[10]]. Keywords: C-reactive protein; metrological traceability; result comparability; standardization EN C-reactive protein metrological traceability result comparability standardization 1537 1539 3 07/18/23 20230801 NES 230801 Of current inflammatory markers identified, C-reactive protein (CRP) has the assay and biological characteristics most conducive to use in clinical practice [[1]]. [Extracted from the article]