Search

A monitoring system is needed to determine the performance of an off-grid solar power plant. This paper presents a monitoring system design for an off-grid solar power plant with a capacity of 4 kWp. This off-grid solar power plant system was built on campus 2 of Institut Teknologi Nasional Malang. The purpose of a monitoring system is to collect and present information systematically about the state of the off-grid solar power plant system. This information can be accessed anywhere and anytime by users. Hardware used includes SPM91 to read energy meters digitally, PZEM-017 as a Modbus-based measuring instrument, and communication devices to send data to a database server. The monitoring system dashboard was built using Haiwell SCADA software. The result was a monitoring system that can display parameter data, data loggers, and graphs of the condition of the off-grid solar power plant. The PZEM-017 has an accuracy rate of 99.48% for voltage readings and 98.76% for current readings. Meanwhile, the SPM91 has an accuracy rate of 99.89% for voltage readings and 99.25% for current readings. [ABSTRACT FROM AUTHOR]

Major latex proteins, or MLPs, are crucial to plants' capacity to grow, develop, and endure biotic and abiotic stresses. The MLP gene family has been found in numerous plants, but little is known about its role in Populus simonii × P. nigra. This study discovered and assessed 43 PtMLP genes that were unevenly dispersed throughout 12 chromosomes in terms of their physicochemical characteristics, gene structure, conserved motifs, and protein localization. Based on their phylogeny and protein structural characteristics, three separate subclasses of PtMLP family were identified. Segmental and tandem duplication were found to be essential variables in the expansion of the PtMLP genes. The involvement of the PtMLP genes in growth and development, as well as in the responses to different hormones and stresses, was demonstrated by cis-regulatory element prediction. The PtMLP genes showed varying expression patterns in various tissues and under different conditions (cold, salt, and drought stress), as demonstrated in RNA-Seq databases, suggesting that PsnMLP may have different functions. Following the further investigation of the genes demonstrating notable variations in expression before and after the application of three stresses, PsnMLP5 was identified as a candidate gene. Subsequent studies revealed that PsnMLP5 could be induced by ABA treatment. This study paves the way for further investigations into the MLP genes' functional mechanisms in response to abiotic stressors, as well as the ways in which they can be utilized in poplar breeding for improved stress tolerance. [ABSTRACT FROM AUTHOR]

The escalating global capacity of desalination plants has posed a significant environmental threat due to the discharge of brine. Consequently, urgent treatment of these hypersaline brines has become imperative. This article provides an overview of a novel hybrid model for water desalination. Energy consumption and brine discharge of three desalination configurations, namely freeze desalination (FD), multi‐effect desalination (MED), and reverse osmosis (RO), are compared. The configurations encompass FD, MED‐FD, and RO‐MED‐FD, with FD utilizing the brine from MED and RO desalination. The hybrid desalination system integrates with combined power and cooling CO2 system (CPCS‐CO2) for energy supply. This hybridization offers enhanced operational flexibility, increased desalination capacity, and reduced brine discharge. Optimal gas heater pressure exists for different temperatures and salt concentrations in saline water. The findings demonstrate a noteworthy 47% and 50% reduction in energy consumption and brine discharge, respectively, in RO‐MED‐FD compared to simple FD. [ABSTRACT FROM AUTHOR]

Numerous studies have attempted to pinpoint certain traits of rice varieties linked with great ratooning ability that may be used in cultural practice. However, both genetic and environmental variables affect rice's capacity for ratooning. We are able to measure the innovative ratooning ability that affects the decline in ratoon yield using the agronomic features of the main crop and ratoon rice in our global database for a meta‐analysis, drawn from 51 experiments in 14 countries. We discovered that changes in cultivar yield and maturity features, cropping location, and nitrogen fertilizer treatment may all affect a plant's capacity to tiller. On the other hand, the growth duration ratoon ability was less responsive to variations in cultivars and cropping location. We also found that ratooning changes the plant architecture for yield generation from bigger spikelets with fewer panicles to fewer spikelets (dropping 48%) with larger panicles (increasing 19%). We came to the conclusion based on our research that the decreased yield in ratoon crops may be caused by fast ear emergence and aggressive tillering, which negatively influence stem elongation, panicle differentiation, and a lack of nutrition, resulting in fewer spikelets (panicle−1). The present data are thoroughly summarized and analyzed in this research, which also clarifies the lack of knowledge around the characteristics that affect ratoon rice crop production. Core Ideas: A comprehensive global quantitative analysis was conducted to assess the ratoon rice's ratooning ability.The tillering–ratooning ability was found to be influenced by variations in genetic and environmental factors.Genetic and environmental variables may have little effect on ratoon crop growth duration.The plant architecture shifts from large spikelets in the main crop to large panicles in the ratoon crop.The accelerated ear emergence could have a detrimental impact on stem elongation during panicle differentiation. [ABSTRACT FROM AUTHOR]

The safety of workers and equipment in the power grid requires the shutdown of power plants in case of maintenance or malfunction. The shutdown relies on protective devices that must be properly coordinated to isolate only the part of the grid affected by the malfunction. Using the DIgSILENT PowerFactory software, an analysis was conducted on a model of an accurate real grid integrating a photovoltaic power plant with a capacity of 390 kW. Protection coordination testing was carried out for three-phase, two-phase, and single-phase short circuit currents at arbitrarily selected locations at medium and low voltage levels. Protection in the time domain is coordinated on lines and busbars to determine the speed and selectivity of protective devices. The analysis results indicate that adequately adjusting the three-phase short circuit at the main transformer output 110/10 kV with an impedance of 0 O and an allowed protection operation time of up to two seconds can be correctly addressed within 36.7 ms. [ABSTRACT FROM AUTHOR]

Plant functional traits reflect the capacity of plants to adapt to their environment and the underlying optimization mechanisms. However, few studies have investigated trade-off strategies for functional traits in desert-wetland ecosystems, the mechanisms by which surface water disturbance and groundwater depth drive functional trait variation at the community scale, and the roles of intraspecific and interspecific variation. Therefore, this study analyzed specific differences in community-weighted mean traits among habitat types and obtained the relative contribution of intraspecific and interspecific variation by decomposing communityweighted mean traits, focusing on the Daliyabuyi Oasis in the hinterland of the Taklamakan Desert. We also explored the mechanisms by which surface water and groundwater influence different sources of variability specifically. The results showed that plant height, relative chlorophyll content, leaf thickness, leaf nitrogen content, and nitrogen-phosphorus ratio were the key traits reflecting habitat differences. As the groundwater depth becomes shallower and surface water disturbance intensifies, plant communities tend to have higher leaf nitrogen content, nitrogenphosphorus ratio, and relative chlorophyll content and lower height. Surface water, groundwater, soil water content, and total soil nitrogen can influence interspecific and intraspecific variation in these traits through direct and indirect effects. As arid to wet habitats change, plant trade-off strategies for resources will shift from conservative to acquisitive. The study concluded that community functional traits are mainly contributed by interspecific variation, but consideration of intraspecific variation and the covariation effects that exist between it and interspecific variation can help to further enhance the understanding of the response of community traits in desert-wetland ecosystems to environmental change. Surface water disturbance has a non-negligible contribution to this adaptation process and plays a higher role than groundwater depth. [ABSTRACT FROM AUTHOR]

Supply chain network design (SCND) problems are essential in formulating strategic decisions on the number of facilities, network facility location, and plant capacity, to ensure the optimal delivery of products from manufacturers to end consumers. On the other hand, assembly line balancing (ALB) problems provide details on operational decisions which encompass production levels and inventories and therefore should be flexible enough to react when changes in resource availability and product demands occur. This study develops a novel combination of these independent problems as a multi-objective SCND-ALB problem which considers economic, environmental, and social objectives in determining the optimal design and operational conditions of the supply chain which consists of U-shaped assembly lines. Furthermore, the normal type belief degree-based uncertainty is considered to reflect the uncertainty of the parameters of the problem. The uncertain formulation is crisped using two different approaches. Then, two multi-objective solution approaches of the literature such as TH and GCM approaches are considered to simultaneously account for the three sustainability objectives of the obtained crisp multi-objective formulations. Finally, a numerical example is used to demonstrate the capabilities of the problem in detail. Furthermore, several test problems are used to compare the performance of the solution approaches. Based on the obtained results, the TH approach performs better in 100% of the experiments. [ABSTRACT FROM AUTHOR]

Current rates of climate change are exceeding the capacity of many plant species to track climate, thus leading communities to be in disequilibrium with climatic conditions. Plant canopies can contribute to this disequilibrium by buffering macro‐climatic conditions and sheltering poorly adapted species to the oncoming climate, particularly in their recruitment stages. Here we analyse differences in climatic disequilibrium between understorey and open ground woody plant recruits in 28 localities, covering more than 100,000 m2, across an elevation range embedding temperature and aridity gradients in the southern Iberian Peninsula. This study demonstrates higher climatic disequilibrium under canopies compared with open ground, supporting that plant canopies would affect future community climatic lags by allowing the recruitment of less arid‐adapted species in warm and dry conditions, but also it endorse that canopies could favour warm‐adapted species in extremely cold environments as mountain tops, thus pre‐adapting communities living in these habitats to climate change. [ABSTRACT FROM AUTHOR]

This contribution focuses on extending the current state of the art in a central resource allocation planning model known under the name of the short-run Johansen industry model in three ways. First, we correct a long-standing issue of the correct choice of weight variables on the capacity distribution by guaranteeing that these weights determine production combinations that belong to the production technology on which the plant capacity estimates are based in the first place. Second, we exploit the gap between average practice and best practice models by introducing an efficiency improvement imperative that allows for partial technical inefficiency when planning. Third, instead of only considering output-oriented plant capacity, we allow for alternative plant capacity concepts. In particular, we introduce an input-oriented plant capacity concept, and an alternative attainable output-oriented plant capacity concept that corrects a major empirical issue in the traditional output-oriented plant capacity notion. These methodological refinements are illustrated with a data set on U.S. fishing vessels by developing a planning model to curb overfishing. [ABSTRACT FROM AUTHOR]

Elevated atmospheric CO2 concentration and precipitation change affect plants' survival and thriving. Phenotypic plasticity can show plants adaptability to varying environment. Physiological plasticity reflects plants capacity to open areas, and morphological plasticity reflects capacity to survive and grow. In this study, we simulated combined effects of elevated CO2 and precipitation change on the phenotypic plasticity of two Stipa species: Stipa grandis and Stipa breviflora. Our results indicated that plasticity of physiology was higher than plasticity of morphology under either ambient or elevated CO2 concentration in both Stipa species. S. breviflora showed higher plasticity index of physiological (PIp) and plasticity index of morphological (PIm) than S. grandis under elevated CO2 concentration. Therefore, we speculate that S. breviflora is more adaptable than S. grandis under high CO2 concentration in the future. Elevated atmospheric CO2 concentration and simultaneous precipitation change is advantageous to S. breviflora distribution expansion, nonetheless, the changing environments also favor the competitive ability of S. grandis. [ABSTRACT FROM AUTHOR]

Rapid growth in the global population and associated elevated reliance on modern technology has resulted in increased demand for energy consumption. This has resulted in an increased focus on the development and generation of advanced sustainable energy systems. The swift implementation of sustainable renewable energy resource utilization and improvement in their efficiency by the modification of current technologies are the possible solutions that gave rise to the emergence of geothermal technology as a potential alternative. Geothermal technology is a non-carbon renewable energy resource that could be utilized efficiently to fulfil the energy demands while mitigating the climate change threat. According to the surveyed literature, the global geothermal energy power plant installation capacity has reached 14.3 GWe to successfully implement this sustainable alternative. In order to have a successful and uninterrupted way forward, it is essential to evaluate the constraints both in terms of technicality and economic feasibility to establish an approved framework. Moreover, the governance and monitoring regarding the social and environmental impact alongside the legal challenges should also be addressed. The significant barriers include increased capital cost, site selection, superiority of resources at diverse levels of rock bottoms, and obstruction from nearby residents that need to be addressed appropriately. As a result, policymakers will continue to seek measure that have least negative impact on environment. [ABSTRACT FROM AUTHOR]

To meet the requirements of developing high head and huge capacity hydropower plants, this paper proposes a new Pelton turbine that joints three runners by one vertical shaft to have a rated head of 1 000 m and a single unit capacity close to 800 MW. The design concept of increasing capacity by increasing the number of runners and the structural components of the new turbine-generator unit are explained, the theoretical design parameters of the runner are calculated and presented, the performance characteristics and the flow patterns in runner and casing are predicted and optimized by CFD simulation. The results show that the rated operating efficiency of the turbine can reach 87%, and the operating characteristic curves are smooth for different heads and outputs, the water splashing interference in the casing is an important factor affecting the efficiency of the turbine. By optimizing the layout of the runners and nozzles in the casing to suppress the splashing interference, the efficiency level, torque oscillation, and operation stability of the Pelton turbine can be improved. This preliminary attempt has demonstrated the feasibility of the concept and also found the importance of optimizing the water splashing in the casing, which has reference values for further researches. [ABSTRACT FROM AUTHOR]

Surface hazards can form hazard cascades which expand their reach. However, our understanding of their complex dynamics and ability to mitigate their impacts remain limited. In 2018, two landslides dammed the Jinsha River in the Tibetan plateau and formed landslide‐dammed lakes. Subsequent dam breaches prompted the evacuation of >120,000 people. An early warning system for floods using a regional seismic network has been proposed on the basis of catastrophic floods having been detected ∼100 km away, with seismic energy proportional to discharge. Surprisingly, we find that this catastrophic outburst flood was undetectable beyond a few kilometers, with peak seismic energy preceding peak discharge. We propose that river channel stability also controls seismic energy generation and should be considered for accurate monitoring of catastrophic floods. In contrast, we find that the various processes during dam breach can be well‐characterized seismically further away and provide warning ∼60 min before discharge exceeds monsoon flood levels. We also show that numerical modeling of dam breaches which typically lacks in situ measurements can benefit from incorporating seismic data as constraints. Finally, we show that this event drastically increased sediment fluxes ∼670 km downstream for years and may significantly reduce the capacity of hydropower plants. Our results reveal ways to improve early warning of catastrophic outburst floods and the need to consider surface hazards' long‐term impact when managing infrastructure in mountainous regions. Plain Language Summary: Mountainous regions are prone to surface hazards such as landslides and floods. However, our understanding of how these events evolve and interact is limited. In 2018, two landslides blocked a river in Tibet and created landslide‐dammed lakes. Subsequently, the dam broke and the resulting outburst floods severely damaged downstream infrastructure and led to the evacuation of >120,000 people. In contrast to what previous studies suggest, we find that this catastrophic outburst flood was undetectable beyond a few kilometers, with peak seismic energy preceding peak discharge. We propose that river channel stability also controls seismic energy generation and should be considered for accurate monitoring of catastrophic floods. Conversely, the dam breakage could be detected seismically further away and provide warning ∼60 min before discharge exceeded monsoon flood levels. Finally, we show that this event drastically increased sediment amounts downstream for years and may reduce the capacity of hydropower plants. Our results reveal ways to improve seismic monitoring and early warning of catastrophic floods and the need to consider the long‐term impact of surface hazards when managing downstream infrastructure. Key Points: Catastrophic outburst floods were surprisingly quiet with peak seismic energy preceding peak discharge due to changes in channel stabilityVarious dam breach processes can be well‐characterized seismically, which can constrain numerical modeling and provide earlier warningThese hazard cascades drastically increased sediment fluxes ≥670 km downstream for years and reduced hydropower plant capacity [ABSTRACT FROM AUTHOR]

An integrated system is studied to supply green hydrogen feedstock for ammonia production in the Netherlands. The system is modeled to compare wind and solar resources when coupled to Alkaline Electrolysis (AEL) and Proton Exchange Membrane Electrolysis (PEMEL) technologies with a compressed hydrogen storage system. The nominal installed capacity of the electrolysis plant is around 2.3 GW, with the most suitable energy source offshore wind, and the preferred storage technology pressurized tubes. For Alkaline Electrolysis and Proton Exchange Membrane Electrolysis technologies, the levelized cost of hydrogen is 5.30 €/kg H 2 and 6.03 €/kg H 2 , respectively. • Studied a novel system for green hydrogen in the Netherlands. • Offshore wind beats solar for the electrolysis process. • Pressurized tubes emerge as optimal hydrogen storage. • AEL produces hydrogen at a lower cost than PEMEL. • The model suggests a green route to ammonia production. [ABSTRACT FROM AUTHOR]

This paper discusses the plant-wide control system of a biohydrogen plant from biomass. The plant's control structure is designed by assessing the use of model predictive control (MPC) and proportional-integral (PI) controllers for each controlled variable. Then, the control structure design is tested by set point and disturbance change tests, and its performance is evaluated by integral square error (ISE). This plant is simulated in two different capacities to understand the effect of change in plant capacity on the plant's controllability. Results show that the plant with capacity A has controllability of +25% and −5%, while the plant with capacity B has controllability of +100% and −5% for the dry biomass molar flow rate change test. Both plants have the same controllability of +100% and −100% for the dry biomass temperature test. Both plants result in a dry biomass conversion rate of 16.52%, where the amount of H2 produced is 382 kg/h and 2,291 kg/h, respectively. [ABSTRACT FROM AUTHOR]

Even though there are numerous CO2 capture technologies (such as chemical and physical absorption), investigators are still trying to come up with novel methods that can minimize the energy requirements for their integration into thermal power plants, as well as the CAPEX and OPEX expenses. In this work, the technical and financial aspects of integrating two-stage polymeric membranes into a coal-fired power plant with a capacity of 330 MW were examined. The study researched the membrane post-combustion CO2 capture process utilizing CHEMCAD version 8.1 software with several parameters and an expander to decrease the total cost. The simulation showed promising results regarding reducing power consumption after using an expander for both a high capture rate (>90%) and a CO2 concentration of more than 95%. Thus, the CO2 captured cost decreased from 58.4 EUR/t (no expander) to 48.7 EUR/t (with expander). [ABSTRACT FROM AUTHOR]

Indoor low-concentration carbon monoxide (CO) exposure is widespread worldwide, and potted plants may be a potential means for CO purification. The objective is to evaluate common indoor plants' CO purification and tolerance capacities. Epipremnum aureum (Linden ex André) G.S.Bunting, Chlorophytum comosum (Thunb.) Jacques, Spathiphyllum kochii Engl. & K.Krause, and Sansevieria trifasciata Hort. ex Prain with similar sizes were tested in the glass chamber with initial CO concentrations of 10, 25, 50, 100, 200, and 400 ppm, respectively. (1) The CO purification capacity of the four potted plants is ranked as Epipremnum aureum (Linden ex André) G.S.Bunting > Chlorophytum comosum (Thunb.) Jacques > Spathiphyllum kochii Engl. & K.Krause > Sansevieria trifasciata Hort. ex Prain. Under the purification effect of each plant, the CO concentration in the chamber decreases linearly and significantly (p < 0.05), and within a specific time period, the time-weighted average (TWA) CO concentrations can be reduced to below the corresponding permissible exposure limits specified by some countries and organizations. (2) With the increase of the stomatal number of each plant and the increase in CO concentration, the hourly and cumulative absorbed CO of each plant increase linearly and significantly (p < 0.05). (3) With the increase in CO concentration, the CO purification efficiency of each plant decreases exponentially and significantly (p < 0.05). (4) When the CO concentration was ≤ 50 ppm, all plants could effectively purify CO without damage. When the CO concentration was in the range of 100 ~ 400 ppm, within 2 weeks after the 48-h experiment, the leaf tips of Chlorophytum comosum (Thunb.) Jacques and Epipremnum aureum (Linden ex André) G.S.Bunting were damaged one after another, and the damaged leaf area increased with the increase of CO concentration. However, each plant as a whole still survived. This study demonstrated that different species of potted plants can effectively absorb low concentrations of CO to varying degrees, but higher concentrations of CO will damage the survival of specific species of potted plants. [ABSTRACT FROM AUTHOR]

Soybean (Glycine max) is one of the most important crops globally, serving as a primary source of protein and oil for both human consumption and animal feed. Chlorophyll is crucial for photosynthesis and plays a significant role in the growth and development of soybean plants. Chlorophylls are one of the main metabolites responsible for the color of foliage and fruits, particularly when they are still unripe. The spectral properties of chlorophylls are essential in harvesting light energy and in the transduction of absorbed light energy for photosynthesis. Like other plants, the variation of the leaf color as well as photosynthetic activity in soybean, is dependent on chlorophyll concentration. Chlorophyll content affects nutritional deficits, stress, and photosynthetic capacity of the plant per unit area of the leaf. This paper investigates the relationship between chlorophyll contents and soybean yield, considering various factors such as photosynthetic efficiency, plant health, and environmental conditions. [ABSTRACT FROM AUTHOR]

Copyright of Ciencia e Ingenieria Neogranadina is the property of Ciencia e Ingenieria Neogranadina and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The LAUNCH MELT™ Ultra-Low Energy urea plant concept, which was launched during the Stamicarbon symposium in 2012 as a 5XX design, was designed, constructed and successfully put into operation for three grassroot plants in China since the beginning of 2021. All three plants were designed with same name plate capacity of 2334 MTPD urea prills. To date, three more Ultra-Low Energy grass-root plants; two plants under construction are expected to be in operation in the middle of 2024 and a further plant is in the engineering phase. Based on actual plant operation, the Ultra-Low Energy Design for a melt plant with prilled product demonstrates a steam consumption (23 bara, 330°C) of less than 567 kg steam/ton product compared to traditional LAUNCH MELT™ Pool Reactor Designs (former Urea 2000plus®) with slightly below 870 kg steam/ton product. This paper highlights the process design aspects as well as operational experience of grass root Ultra-Low Energy urea plants in operation in China, along with a comparison of the key performance parameters, including steam consumption and product quality. [ABSTRACT FROM AUTHOR]

Bacteria have the ability to inhibit the growth of competitors by using contact-dependent killing devices, such as the bacterial-killing type IV secretion system (T4SS). A recent publication in The ISME Journal by Wang et al. (ISME J, 2023. https://doi.org/10.1038/s41396-023-01533-7) uncovered that T4SS could deliver a unique "non-toxic" effector protein, LtaE, into interspecies bacterial cells. The delivery of LtaE by the bacteria Lysobacter enzymogenes induces the antifungal antibiotic 2,4-DAPG production by binding to the transcriptional repressor PhlF in another bacterial species, Pseudomonas protegens. As a result, P. protegens regains the capacity to protect plants from nearby fungal infections. This finding uncovered a novel role of T4SS in mediating interactions of interkingdom cooperation to kill microbial competitors in soil microbiomes. [ABSTRACT FROM AUTHOR]

Supply chain network design (SCND) problems are used to formulate and make strategic decisions on the number of facilities, network facility location and plant capacity, to ensure the optimal delivery of products from manufacturers to end consumers. On the other hand, assembly line balancing (ALB) problems provide details on operational decisions which encompass production levels and inventories and therefore should be flexible enough to react when changes in resource availability and product demands occur. Integration of the SCND and ALB problems has thus been explored to develop a more holistic model and to further improve the efficiency of the supply chain. This study develops a novel SCND-ALB optimization model which considers economic, environmental, and social objectives in determining the optimal design and operational conditions of the supply chain under flexible cycle time of the assembly lines. Furthermore, for the first time a zigzag type belief degree model is integrated to address system uncertainties of the SCND-ALB problem. Two multi-objective solution approaches are then considered to simultaneously account for the three sustainability objectives. A case study on the production of a nozzle is explored to demonstrate the capabilities of the model. [ABSTRACT FROM AUTHOR]

The intricate hydrological processes elucidating the interplay between rainfall and flow manifest through rainwater's traversal along diverse routes, encompassing surface runoff and subsurface flow. While the foundational association between these entities is discernible, the convoluted intricacies characterizing this correlation defy straightforward comprehension. Examining the data between 2019 and 2022, the average daily sewage outflow was 12,518 m3/d, with occasional peaks of up to 50,440 m3/d. The wastewater treatment plant's capacity of 35,000 m3/d was usually not exceeded. Overall, average daily sewage outflows varied between 11,716 m3/d and 13,969 m3/d during the studied period. Comprehending this interrelationship holds pivotal significance for the optimization of water-resource-management strategies. A moderate correlation (r = 0.42) between daily rainfall levels and sewage discharge was found in the dataset covering 2018–2023. When categorizing daily rainfall into groups labelled "A" through "G" and comparing them to sewage flows, a pattern emerged: Rain-free days in group "A" had the lowest average sewage flow (10,996 m3/d), while heavy rain days in group "G", had the highest average flow (22,112 m3/d). This observation underscores a significant correlation between intensified rainfall and increased volume of sewage discharge. Through a comprehensive analysis of factors such as sewage composition, meteorological dynamics and chronological sequences, we will gain an enhanced ability to prognosticate and govern sewage systems. The significance of this is heightened within the context of evolving climatic dynamics. [ABSTRACT FROM AUTHOR]

Traditional plants have played a significant role in human culture and medicine throughout history. These plants have the capability to synthesize a diverse range of chemical compounds that serve essential biological functions. This study's objective was to analyze the phytochemical composition of five traditional plants, namely Emilia sonchifolia, Chloranthus erectus, Caesalpinia mimosoides, Acacia concinna, and Tacca chantrieri, native to northern Thailand, using LC-QTOF/MS analysis and assess their potential bioactivity through various assays including DPPH radical scavenging activity, ABTS radical scavenging activity, ferric ion reducing antioxidant power, total phenolic compounds, and total flavonoid content. The findings revealed the presence of natural bioactive compounds in each plant extract, which exhibited pharmacological activity. Notably, Caesalpinia mimosoides displayed the highest antioxidant capacity across all plant extracts (IC50 in DPPH with the methanol extract was 0.03 and 898.18 mg AAE/100 g with the ethanol extract), along with elevated levels of total phenolic and flavonoid content, which showed the highest TFC at 46.79 µgRE/g in the methanol extract. In conclusion, traditional plants possess notable biological constituents and antioxidant properties, suggesting their potential for bioactive applications. Based on these findings, these indigenous plants can serve as a valuable resource in traditional medicine, offering the possibility of uncovering new products with similar capabilities and additional therapeutic attributes worthy of future exploration. [ABSTRACT FROM AUTHOR]

The current non‐circular and non‐regenerative approaches to farm dairy waste management have spurred a search for alternatives. Anaerobic digestion of the waste to collect biogas and digestate products is an option with significant potential for reducing the farm's environmental footprint and generating additional revenue. Although much research exists on the anaerobic digestion of dairy manure, there is a lack of detailed understanding of the challenges faced with farm dairy effluent (FDE). In addition, most existing studies lack key data, such as the on‐farm process cost. Therefore, the main aim of this review is to highlight these challenges and offer new insights into possible state‐of‐the‐art solutions The conventional methods of FDE disposal are critically compared to anaerobic digestion for economic, environmental, and technical feasibility. The paper also extends into a case study where a preliminary techno‐economic assessment showed that in New Zealand, $2.3 million would be required to set up a farm anaerobic digestion plant with a 900‐cow capacity. This information can aid decision‐making on policies for farm technologies. [ABSTRACT FROM AUTHOR]

This correction notice provides updates and corrections to an article titled "Plant capacity notions: review, new definitions, and existence results at firm and industry levels" by Kerstens and Sadeghi. The affiliation of one of the authors, Kristiaan Kerstens, has been updated. Formatting errors in equations on pages 6 and 7 have been corrected, and an error in the labeling of equation (41) on page 16 has been removed. Figures 1(a), 1(b), 2(a), and 2(b) have been re-positioned in section 5, and the word "become" has been moved to a single line on page 19. [Extracted from the article]

In Poland, mixed municipal waste, municipal sewage and agricultural waste are used to produce biogas. Biodegradable green waste and kitchen waste generated in households are not used for this purpose. In the cogeneration process, the produced biogas is burned in a gas generator, resulting in electricity and heat. Electricity is sold in its entirety to the energy operator, but there are no heat consumers. The solution may be the construction of municipal biogas plants in urban areas, using kitchen and green biowaste from households located in cities and surrounding municipalities. Thanks to this location, the surplus heat can be used by the local district heating network to heat the buildings in the city. The aim of the article is to assess the possibilities of producing biogas and energy from municipal bio-waste generated in households in Krakow and surrounding communes. To achieve the goal, a simulation was carried out for a biogas plant with a capacity of 1 MW. Two types of substrates were used as inputs, i.e., biowaste from households and green biowaste. The data for analysis came from the Marshal's Office of the Małopolskie Voivodeship, to which municipalities submit reports on the amount of municipal waste collected, and the Central Statistical Office, which has data on municipal waste collected in municipalities in Poland. The collected data were used to conduct five simulations. The most advantageous method is to produce biogas from kitchen waste and silage from green waste mixed in the appropriate C:N ratio. Assuming the optimal proportions of mixed substrates, a 1 MW biogas plant can produce 4.1 million m3 of biogas, from which electricity can be produced for 2.5 thousand houses and heat for 1.1 thousand houses. The article ends with conclusions and recommendations on how to collect biodegradable municipal waste, which should be treated as a valuable source of energy. [ABSTRACT FROM AUTHOR]

Drought stress profoundly affects plant growth and development, posing a significant challenge that is extensively researched in the field. Thioredoxins (TRXs), small proteins central to redox processes, are crucial to managing both abiotic and biotic stresses. In this research, the VyTRXy gene, cloned from wild Yanshan grapes, was validated as a functional TRX through enzyme activity assays. VyTRXy was found to bolster photosynthesis, augment levels of osmotic regulators, stimulate antioxidant enzyme activities, and strengthen drought resilience in transgenic plants. These enhancements were evidenced by higher survival rates, optimized photosynthetic metrics, increased proline levels, augmented chlorophyll concentration, reduced electrolyte leakage, and decreased malondialdehyde and hydrogen peroxide (H2O2) levels. Furthermore, there was a surge in the activities of enzymes such as catalase, ascorbate peroxidase, glutathione peroxidase, dehydroascorbate reductase, and glutathione reductase, along with an increased expression of TRX peroxidase. Notably, under drought stress, there was a marked elevation in the expression of stress-responsive genes, including the adversity stress-inducible expression gene (NtRD29A) and DRE-binding protein (NtDREB), in transgenic tobacco. This investigation is pivotal in the quest for drought-resistant grapevine varieties and provides significant insights into the molecular functionality of VyTRXy in enhancing grapevine drought tolerance. [ABSTRACT FROM AUTHOR]

Plant volatiles, particularly biogenic volatile organic compounds (BVOCs), emitted in urban areas have attracted attention as olfactory signals between plants and other organisms, including insects. However, in urban areas, elevated ozone (O3) levels inhibit plant growth and degrade olfactory signals, including both insect pheromones and BVOCs, resulting in disrupted biological communication. In this article, we review recent findings on how O3 modifies olfactory interactions, focusing on both the emitters and receivers of these signals. The influence of O3 on herbivorous insects and their enemies alters the pressure caused by herbivorous damage in the field, which can affect the development of the defensive capacities of plants at the hereditary level. To address the challenges posed by O3 in biological interactions, BVOC characteristics (e.g., emission rate and species, blend composition, O3 reactivity, and oxidative products) and O3 effects on insects (e.g., preference and antennal detectivity) should be clarified. At the same time, BVOC emissions are expected to increase with rising temperatures, which will likely increase the impact of BVOCs on O3 formation in the future. Therefore, it is necessary to devise strategies, such as selecting non- or low BVOC emitters, to regulate BVOC emissions from urban greening plants and mitigate O3 risks to olfactory interactions and plant health. [ABSTRACT FROM AUTHOR]

This experiment was conducted to study the effects of different doses of γ-aminobutyric acid (GABA) on mutton sheep. The experimental animals were 120 similar month old Du Han hybrid sheep, randomly divided into 4 groups: control group and experimental group 1 (60 mg/kg GABA), test group 2 (100 mg/kg GABA), test group 3 (140 mg/kg GABA), pre feeding period of 3 days, experimental period of 30 days. The growth performance, serum biochemical, antioxidant and immune indexes, were detected in this experiment. The results showed that: ① the average daily weight gain of group 2 and group 3 was significantly higher than that of control group (P<0.05), and the feed intake of group 2 and group 3 was significantly higher than that of control group (P<0.05). The feed weight ratio of group 2 and group 3 was significantly lower than that of control group (P<0.05). ② Compared with control group, the serum total protein (TP) and albumin (ALB) contents of the group 2 and group 3 were significantly increased (P< 0.05), while the activities of aspartate aminotransferase (AST), alanine aminotransferase (ALT), and urea nitrogen (BUN) content were significantly reduced (P<0.05). ③The total antioxidant capacity (T-AOC) in the serum of groups 1, 2, and 3 were significantly increased (P<0.05), while the activities of superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) in groups 2 and 3 were significantly increased (P< 0.05). The contents of malondialdehyde (MDA) in the serum of groups 1, 2, and 3 were significantly reduced (P<0.05). ④ The levels of serum immunoglobulin A (IgA), immunoglobulin G (IgG), and in terleukin-2 (IL-2) in group 2 and 3 significantly increased (P<0.05). Comprehensive research results: Adding 100 mg/kg and 140 mg/kg GABA to diet can improve the growth performance, serum biochemical, antioxidant, and immune indicators of mutton sheep. Considering economic costs, the recommended dosage is 100 mg/kg. [ABSTRACT FROM AUTHOR]

Multiple abiotic stresses negatively impact wheat production all over the world. We need to increase productivity by 60% to provide food security to the world population of 9.6 billion by 2050; it is surely time to develop stress-tolerant genotypes with a thorough comprehension of the genetic basis and the plant's capacity to tolerate these stresses and complex environmental reactions. To approach these goals, we used multivariate analysis techniques, the additive main effects and multiplicative interaction (AMMI) model for prediction, linear discriminant analysis (LDA) to enhance the reliability of the classification, multi-trait genotype-ideotype distance index (MGIDI) to detect the ideotype, and the weighted average of absolute scores (WAASB) index to recognize genotypes with stability that are highly productive. Six tolerance multi-indices were used to test twenty wheat genotypes grown under multiple abiotic stresses. The AMMI model showed varying differences with performance indices, which disagreed with the trait and genotype differences used. The G01, G12, G16, and G02 were selected as the appropriate and stable genotypes using the MGIDI with the six tolerance multi-indices. The biplot features the genotypes (G01, G03, G11, G16, G17, G18, and G20) that were most stable and had high tolerance across the environments. The pooled analyses (LDA, MGIDI, and WAASB) showed genotype G01 as the most stable candidate. The genotype (G01) is considered a novel genetic resource for improving productivity and stabilizing wheat programs under multiple abiotic stresses. Hence, these techniques, if used in an integrated manner, strongly support the plant breeders in multi-environment trials. [ABSTRACT FROM AUTHOR]

Background: Clonal plants can successfully adapt to various ecosystems. A trade-off between sexual and clonal reproduction is generally assumed in clonal plants, which may be influenced both by the characteristics of the plant itself and environmental conditions. Currently, it is unclear how climate change, and specifically warming and increased precipitation, might affect sexual and clonal reproduction in clonal plants. Therefore, this study aimed to investigate both the sexual and clonal reproduction responses of Stipa breviflora to warming and increased precipitation. A controlled experiment was conducted by inducing increases in precipitation (ambient condition, 25% and 50% increases) and warming (ambient temperature, 1.5 °C and 3.0 °C increases). Results: Warming significantly influenced both the ratio of reproductive ramet shoot biomass to total shoot biomass, and the ratio of reproductive ramet number to total ramet number. Additionally, the ratio of reproductive ramet shoot biomass to total shoot biomass was also significantly affected by increased precipitation. Increased precipitation benefited sexual reproduction, while effects of warming on reproductive and/or vegetative ramets varied from negative to positive depending on precipitation conditions. There was no relationship between the number or shoot biomass of reproductive ramets and vegetative ramets. Reproductive ramets displayed greater sensitivity to climate change than vegetative ramets. Conclusions: The findings of our study suggest that there was no trade-off between sexual and clonal reproduction in S. breviflora. The combined impact of warming and increased precipitation promoted sexual reproduction but did not inhibit clonal reproduction. Clonal plants with the capacity for both sexual and clonal reproduction, may cope with climate change well via clonal reproduction, ensuring their survival. [ABSTRACT FROM AUTHOR]

Remobilization of carbon (C) and nitrogen (N) from roots and crowns to regrowing shoots is an important strategy for grassland plants to tolerate herbivory. While this remobilization is thought to terminate once plants have the capacity to photosynthesize again and to take up N from the soil, this has rarely been quantified.Here we investigated the remobilization of C and N to regrowing shoots of a perennial grassland under two defoliation frequencies (every 15 and 30 days) and two N fertilization levels (0 and 2.8 g m−2) by growing intact plant–soil cores for 60 days in a growth chamber. We measured the C remobilization from roots and crowns to regrowing shoots using a novel continuous 13C labelling method, and quantified the N remobilization to regrowing shoots and plant N uptake from soil with a 15N tracer method.Regrowing shoots relied strongly on below‐ground C reserves, where up to 52% of C in regrowing shoots came from below‐ground during the first 30 days after defoliation. Below‐ground C was still remobilized when plant shoots had fully regrown and retained full capacity to photosynthesize. Plants relied more on C remobilization with shorter times between defoliation events at the expense of root biomass, particularly without N fertilization. Large amounts of C remobilization were accompanied by large amounts of N remobilization (up to 89% of total shoot N) that were positively related, suggesting a coupled C and N transfer from roots and crowns to shoots.Synthesis. The unexpectedly high dependency on C and N remobilization occurred continuously after defoliation and did not terminate once plants were fully regrown. Our results indicate that remobilization of C and N from below‐ground has profound effects on long‐term productivity and C sequestration that needs to be considered for managing similar grasslands worldwide. [ABSTRACT FROM AUTHOR]

The purification effect of a natural wetland landscape is often low when the focus is placed on the landscape effect. The effective combination of constructed wetland technology with landscape construction is challenging. Taking the Yuhe Wetland Park in Datong, Shanxi Province, China, as an example, the COD, phosphorus, and nitrogen removal capacities of aquatic plant species were determined, as well as the effects of the soil and the microbial communities. The highest COD and P removal capacity was observed for Typha orientalis Presl. which the purification rate reached 76.9% and 76.6%, and the highest N removal capacities were found for Scirpus validus Vahl., the rate of purification was 83.4%. Gram-negative bacteria were dominant. [ABSTRACT FROM AUTHOR]

The construction of standardized tea gardens is the main trend in the development of modern agriculture worldwide. As one of the most important economic crops, tea has increasingly stringent requirements placed on its planting capacity and quality. The application of machine vision technology has led to the gradual development of tea production moving towards intelligence and informatization. In recent years, research on tea production based on machine vision technology has received widespread attention, as it can greatly improve production efficiency and reduce labor costs. This article reviews the current application status of machine vision technology in tea pest monitoring, intelligent harvesting, quality evaluation, and classification, and analyzes and discusses specific challenges around machine vision technology in tea production; for example, this technology lacks a standard database and weather interference, training errors in the model, and differences in the hardware computing speed can become a challenge. Based on the current research and application of machine vision technology in various fields, this article looks ahead to the development prospects and future trends of machine vision technology in tea production applications, such as future research to further integrate multiple types of sensors, improvements in the quality and usability of datasets, optimized model algorithms for existing problems, dissemination of research results, and intelligent management of tea production through machine vision technology. [ABSTRACT FROM AUTHOR]

Copyright of Revista Foco (Interdisciplinary Studies Journal) is the property of Revista Foco and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This article presents research on modelling the operation of an independent electricity generation system consisting of a photovoltaic installation and energy storage in the form of electrochemical batteries (PV/BAT). The generation system was considered primarily in the context of its sizing process, i.e., the selection of the installed power of the photovoltaic installation (PV) and the rated capacity of the battery (BAT). Traditionally, the model includes a one-year analysis of the generation system based on initial (nominal) parameters without considering component performance degradation. The novelty of this research lies in the long-term simulation of the system operation, considering the degradation of its components. The sizing process was based on the numerical method. The best solution is selected on the basis of the economic criterion, while satisfying the reliability condition. The simulations were conducted using Matlab software. Using a comparative analysis, the scale of technical and economic oversizing of the system was determined by considering long-term reliability. For the assumed customer load profile, insolation profile, and battery operation in the range of 25–100% of the available capacity, providing the assumed level of reliability after accounting for degradation in the sizing process resulted in a 33.33% increase in the rated battery capacity, an 18.75% increase in the installed photovoltaic plant capacity, and a 19.5% increase in the system cost of electricity (LCOE) relative to the results of the sizing process without accounting for component performance degradation over the years of operation. [ABSTRACT FROM AUTHOR]

Drought stress is one of the major causes of crop losses. The WRKY families play important roles in the regulation of many plant processes, including drought stress response. However, the function of individual WRKY genes in plants is still under investigation. Here, we identified a new member of the WRKY families, OsWRKY97, and analyzed its role in stress resistance by using a series of transgenic plant lines. OsWRKY97 positively regulates drought tolerance in rice. OsWRKY97 was expressed in all examined tissues and could be induced by various abiotic stresses and abscisic acid (ABA). OsWRKY97-GFP was localized to the nucleus. Various abiotic stress-related cis-acting elements were observed in the promoters of OsWRKY97. The results of OsWRKY97-overexpressing plant analyses revealed that OsWRKY97 plays a positive role in drought stress tolerance. In addition, physiological analyses revealed that OsWRKY97 improves drought stress tolerance by improving the osmotic adjustment ability, oxidative stress tolerance, and water retention capacity of the plant. Furthermore, OsWRKY97-overexpressing plants also showed higher sensitivity to exogenous ABA compared with that of wild-type rice (WT). Overexpression of OsWRKY97 also affected the transcript levels of ABA-responsive genes and the accumulation of ABA. These results indicate that OsWRKY97 plays a crucial role in the response to drought stress and may possess high potential value in improving drought tolerance in rice. [ABSTRACT FROM AUTHOR]

Prunella vulgaris, a medicinal plant with antioxidant capacity, was investigated for its response to varying intensities of far-red light and nutrient levels. Plantlets were cultured for 30 d under low far-red light (LFR) or high far-red light (HFR) conditions and different nutrient levels (full, half, and quarter). HFR reduced leaf and branch number, dry weight, and accumulation of chlorophylls (Chl) and carotenoids (Car), while increasing plant height. Lower nutrient levels increased plant height and leaf number, but decreased branch number, Chl, and Car. HFR significantly increased total phenolic content (TPC), rutin, and rosmarinic acid levels, while total flavonoid content decreased. As nutrient levels decreased, TPC and rosmarinic acid declined. HFR induced significant DPPH scavenging activity, while reducing power increased with higher far-red light and nutrient levels. The ferrous ion chelating effect under LFR reduced with lower nutrient levels. There were strong correlations among TPC, rosmarinic acid, DPPH scavenging activity, and reducing power. In conclusion, HFR inhibited plantlet growth but enhanced secondary metabolite accumulation and antioxidant capacity. Different nutrient levels stimulated diverse growth responses, while elevated nutrient levels promoted secondary metabolite production. This study demonstrated the responses of growth, secondary metabolite accumulation, and antioxidant activity in the in vitro cultured P. vulgaris to supplemental far-red light and various nutrient levels. [ABSTRACT FROM AUTHOR]

• Central power plants present great financial and technological challenges. • Wellhead power plants improve the financial outlook in geothermal projects. • Wellhead plants can be used as a complement in fields developed with central plant. • Hard-to-reach areas are more easily developed with wellhead power plants. Based on preliminary estimates of the geothermal potential of the "Macizo Volcánico del Ruiz", the performance of twelve hypothetical production wells was projected conceptually. Thirteen scenarios of geothermal electricity generation were simulated to the development of the "Macizo Volcánico del Ruiz" geothermal project, considering different technologies and development approaches (wellhead plant and/or central plant). As the results of these simulations and analysis, a technical overview for each scenario was obtained. This overview served as the input for an economic study, which starts from a common base and varies mainly due to the type of plant and the installed capacity of each turbogenerator. Taking all that into consideration it was possible to estimate the construction cost for the different scenarios as well as the operation & maintenance expenses. Finally, a financial projection was made, along with a sensitivity analysis of the construction time for each scenario, which ends when the total installed capacity comes into operation. The results showed the importance of including wellhead plants, when construction times are long, and the benefits of high enthalpy binary plants are highlighted. Under this perspective, the main contribution of the present work is an early analysis procedure of geothermal projects, which provides a general overview for the selection of the development approach, considering the technologies that are gaining relevance in the industry, such as wellhead systems, that no longer are considered a temporary fix but a long-term solution. [ABSTRACT FROM AUTHOR]

The increase in motor vehicle users affects the air around us so that the air becomes unhealthy. CO2 gas from burning motor vehicles causes air pollution. It is important to control air pollution to reduce CO2 exhaust emissions by utilizing vegetation around polluted air locations where plants play a very large role in absorbing CO2. This research aims to determine the level of carbon absorption by plants around the company parking area at PT Komatsu Undercarriage Indonesia located in Cikarang on CO2 gas emissions. To achieve this goal, it is necessary to calculate CO2 emissions from moving sources, measure the CO2 absorption capacity of plants in the company parking area. Data collection was carried out by retrieving tree data and vehicle data. Tree data was collected using a manual calculation method in the area around the company's parking lot in 3 areas, namely the KUI Jami' Mosque. KUI Parking Building and KUI Field. The types of trees in these 3 areas were identified and their average diameter was measured so that CO2 uptake was measured. Vehicle data is collected by counting the number of vehicles in the parking area. It is hoped that the results of this research will have Green Open Space (RTH) in the company's parking area able to absorb carbon gas emissions so that clean, healthy and beneficial air will be created for the community, especially the company. [ABSTRACT FROM AUTHOR]

When transplanting vegetable plants in the field, the transplants undergo a small or large setback in growth, known as transplanting shock. Various practices are commonly applied to reduce the transplanting shock. In the past two decades, several studies have shown that the application of microbial and non-microbial biostimulants can enhance plant tolerance against abiotic stresses. However, there is no information on the effect of applying biostimulants at the time of transplanting in mitigating the transplanting shock of lettuce transplants in the field. Lettuce seedlings transplanted into the soil of an unheated plastic greenhouse were treated with two biostimulants, one microbial (Bactiva®) and one non-microbial (Isabion®), on the day of transplanting and after 14 and 21 days. During production, plant growth, and development, chlorophyll fluorescence and compositional parameters were determined. According to the results, the application of the non-microbial biostimulant had a significant effect on some measured parameters, with the leaves of the treated plants having a higher chlorophyll index (CCI) by 8%, as well as higher fluorescence parameters Fm/Fo, Fv/Fo, and Fv/Fm and area by 7, 10, 3, and 27%, respectively, but fewer total soluble phenols and lower fluorescence parameter ABS/RC by 7 and 26%, respectively, compared to the control untreated ones. The above may constitute some effects on the transplanting shock, without, however, being accompanied by significant effects on the number of leaves/plant, the leaf color parameters (L*, a*, b*, C*, and ho), and the chlorophyll (a, b, a + b), total carotenoid, dry matter, and nitrate content, along with the antioxidant capacity and plant fresh weight at harvest. However, a notable effect was that a greater percentage of plants at harvest had a fresh weight in the 351–400 class, while the greatest percentage of the control plants had a fresh weight in the 301–350 g class. In contrast, the application of the microbial biostimulant had no significant effect on any of the parameters determined compared to the control. Therefore, under the conditions of the present study, the effectiveness of biostimulant application at the time of transplanting on lettuce transplants is questionable. [ABSTRACT FROM AUTHOR]

Cadmium (Cd) pollution is a growing environmental problem that negatively impacts plant growth and development, particularly in maize. In this research, the impact of farmyard manure (FYM) and salicylic acid (SA) on rhizospheric characteristics and the reduction of Cd stress in maize was examined at Government College (GC) University, Lahore, in 2022. The experiment was arranged with a randomized design, including three replications of 12 treatments (T1 = Control; T2 = Farmyard manure; T3 = Salicylic Acid; T4 = 100 mg/kg of soil Cd; T5 = 200 mg/kg of soil Cd; T6 = Farmyard manure + Salicylic acid; T7 = FYM + 100 mg/kg soil Cd; T8 = FYM + 200 mg/kg soil Cd; T9 = SA + 100 mg/kg soil Cd; T10 = SA + 200 mg/kg soil Cd; T11 = FYM + SA + 100 mg/kg soil Cd; T12 = FYM + SA + 200 mg/kg soil Cd). Results demonstrated that Cd stress negatively affected the maize plant and soil properties, but the application of SA and FYM was effective to mitigate the Cd stress up to a certain level. A reduction of 41.52%, 39.14%, and 39.94% in root length, length of the leaf, and crop growth rate was noticed, due to the Cd stress at 200 mg/kg soil, but this reduction was reduced to 18.83%, 10.35%, and 12.26%, respectively, when FYM and salicylic acid were applied as a combined application under the same stress level of Cd. The root biomass, leaf surface area, and length were all improved by SA and FYM, which enhanced the plant's capacity to absorb nutrients and improve growth under Cd stress. In conclusion, the use of salicylic acid together with farm manure can be an effective approach to mitigate Cd stress in maize crops. [ABSTRACT FROM AUTHOR]

Nowadays, many countries and governments implement the cap-and-trade regulation to curb carbon emissions. This study aims to explore how the regulation affects an e-tailer's choice of retailing formats between marketplace and reseller as well as its partner's response by considering a supply chain composed of an e-tailer and a manufacturer. We also take the manufacturer's investment strategy into account and then develop four models to examine the two members' preferences for retailing formats. First, our results demonstrate that if a product's emissions in the retail process are medium (low) or the platform fee rate is relatively low (high), the e-tailer and the manufacturer both prefer marketplace (reseller) mode. Second, the e-tailer prefers to offer reseller mode for one manufacturer with a strong ability of emission reduction and offer marketplace mode otherwise; but the manufacturer's preference is opposed to the e-tailer's. Third, the manufacturer always benefits from her investment, regardless of in marketplace or reseller modes; the e-tailer's attitude towards the manufacturer's investment varies with retailing formats. Specifically, the e-tailer under reseller mode always prefers the manufacturer to invest; but under marketplace mode, he prefers the manufacturer to invest only when the latter's ability of emission reduction is weak. [ABSTRACT FROM AUTHOR]

This paper has considered collaborative coordination in supply chains with capacity reservation contracts using the game theory. In some traditional papers, the capacity reservation contracts have contained a capacity quantity, a reservation quantity and a reservation fee as a decision variable. Each decision variable is determined separately based on individual profit functions of a supplier and a manufacturer under the noncooperative game theory. Those papers have assumed that the supplier is always forced to build sufficient capacity to cover the reservation amount of the manufacturer. However, the supplier might not always comply with the reservation amount of the manufacturer since the capacity quantity is a private decision in the supplier and not released to external companies in practice. For instance, the supplier may choose to under-build knowingly to ensure high utilisation of his capacity. This is a kind of moral hazard problems. This paper has investigated such a strategy that the supplier and manufacturer voluntarily comply with the contract for the purpose of solving the moral hazard problem in the capacity reservation contract. Consequently, we have proposed a method of determining the decision variables collaboratively in the contract such that a consensus of the supplier and manufacturer is built. [ABSTRACT FROM AUTHOR]