Search

Observations on single internally mixed ammonium sulfate/calcium carbonate microparticles are reported. Deliquescence and efflorescence relative humidities for the mixed system are reported.

We report the development and validation of a new humidified aerosol single-scattering albedometer to quantify the effects of water uptake on submicrometer particle optical properties. The instrument simultaneously measures in situ aerosol light extinction (σep) and scattering (σsp) using a cavity-attenuated phase shift-single scattering albedo particulate matter (PM) monitor (CAPS-PMSSA, Aerodyne Research, Inc., Billerica, MA, USA). It retrieves by difference aerosol light absorption (σap) and directly quantifies aerosol single-scattering albedo (SSA), the aerosol "brightness." We custom built a relative humidity (RH) control system using a water vapor-permeable membrane humidifier and coupled it to the CAPS-PMSSA to enable humidified aerosol observations. Our humidified instrument (H-CAPS-PMSSA) overcomes problems with noise caused by mirror purge-flow humidification, heating, and characterizing cell RH. Careful angular truncation corrections in scattering, particularly for larger particles, were combined with empirical observations. Results show that the optimal operational size to be Dp < 400 nm. The H-CAPS-PMSSA was evaluated with several pure single-component aerosols including ammonium sulfate ((NH4)2SO4), absorbing nigrosin, and levoglucosan, an organic biomass smoke tracer. The measured σep, σsp, and the derived optical hygroscopicity parameter (κ) for size-selected ammonium sulfate are in good agreement with literature values. For dry size-selected nigrosin in the 100 < Dp < 400 nm range, SSA values increased from ∼0.3 to 0.65 with increasing Dp. The enhancement in nigrosin σap at RH = 80% was a factor of 1.05–1.20 relative to dry conditions, with the larger particles showing greater enhancement. SSA increased with RH with the largest fractional enhancement measured for the smallest particles. For polydisperse levoglucosan, we measured an optical κ of 0.26 for both light extinction and scattering and negligible absorption. Our new instrument enables reliable observations of the effects of ambient humidity on mixed aerosol optical properties, particularly for light-absorbing aerosols whose climate forcing is uncertain due to measurement gaps. Copyright © 2021 American Association for Aerosol Research [ABSTRACT FROM AUTHOR]

The Aerodyne Soot Particle Aerosol Mass Spectrometer (SP-AMS) can operate with one or both of two particle vaporizers: (1) the standard resistively heated tungsten vaporizer (TV) for detection of non-refractory particulate matter (NR-PM), and (2) an intracavity laser vaporizer (LV) for detection of absorbing, refractory materials, including refractory black carbon (rBC), metal nanoparticles, and associated coatings. In addition to using these vaporizers individually, both can be used simultaneously (dual vaporizer, DV, mode), commonly implemented by sequentially turning the laser vaporizer on (DV-Lon) and off (DV-Loff). Recent results in DV mode have shown an apparent enhancement in measured NR-PM signal during DV-Lon compared with DV-Loff, even for inorganic species unlikely to be strongly associated with rBC. The use of dual vaporizers is complicated by different collection efficiencies (CE) of the two vaporizers, potential differences in the relative ionization efficiencies (RIE) for the same species vaporized from the two vaporizers, and potential interference between the two vaporizers due to laser heating of AMS internal components. Here, we investigated the effect of the laser-heating interference on NR-PM signal. We tested a variety of laser baffles to minimize laser-heating interferences and to constrain the alignment of the laser vaporizer and we identified a baffle that meets these criteria and can be incorporated into SP-AMS systems. For well aligned standard and laser vaporizers, laser heating was found to have only a minor effect on the NR-PM ion signals. Most of the observed increases in NR-PM signals during DV-Lon are attributed to vaporizer-specific differences in the CE and RIE values of NR-PM associated with the rBC-containing particles. Copyright © 2020 American Association for Aerosol Research [ABSTRACT FROM AUTHOR]

There is evidence that black carbon (BC) particles may affect cirrus formation and hence global climate by acting as potential ice nucleating particles (INPs) in the troposphere. Nevertheless, the ice nucleation (IN) ability of bare BC and BC coated with secondary organic aerosol (SOA) material remains uncertain. We have systematically examined the IN ability of 100-400 nm size-selected BC particles with different morphologies and different SOA coatings representative of anthropogenic (toluene and n-dodecane) and biogenic (ß-caryophyllene) sources in the cirrus regime (-46 to -38 °C). Several aerosolized BC proxies were selected to represent different particle morphologies and oxidation levels. Atmospheric aging was further replicated with exposure of SOA-coated BC to OH. The results demonstrate that the 400 nm hydrophobic BC types nucleate ice only at or near the homogeneous freezing threshold (-42 to -46 °C). Deposition IN, as opposed to purely homogeneous freezing, was observed to occur for some BC types between 100-200 nm within the investigated temperature range. More fractal BC particles did not consistently act as superior deposition INPs over more spherical ones. SOA coating generated by oxidizing ß-caryophyllene with O3 did not seem to affect BC IN ability. However, SOA coatings generated from OH oxidation of various organic species did exhibit higher IN onset supersaturation ratio with respect to ice (SS) compared with bare BC particles, with toluene SOA coating showing an increase of SSi by 0.1-0.15 while still below the homogeneous threshold. n- dodecane and ß-caryophyllene-derived SOA only froze in the homogeneous regime. We attribute the inhibition of IN ability to the filling of the pores on the BC surface by the SOA material coating. OH exposure levels of all SOA coating experiments, from an equivalent atmospheric 10 days to 90 days, did not render significant differences in IN potential. Our study suggests that BC particles with large sizes and/or oxidized surfaces generally exhibit better IN ability, and that the organic coating materials can inhibit ice formation. [ABSTRACT FROM AUTHOR]

Biomass burning emits vapors and aerosols into the atmosphere that can rapidly evolve as smoke plumes travel downwind and dilute, affecting climate- and health-relevant properties of the smoke. To date, theory has been unable to explain variability in smoke evolution. Here, we use observational data from the BBOP field campaign and show that initial smoke concentrations can help predict changes in smoke aerosol aging markers, number, and diameter. Because initial field measurements of plumes are generally > 10 minutes downwind, smaller plumes will have already undergone substantial dilution relative to larger plumes. However, the extent to which dilution has occurred prior to the first observation is not a measurable quantity. Hence, initial observed concentrations can serve as an indicator of dilution, which impacts photochemistry and aerosol evaporation. Cores of plumes have higher concentrations than edges. By segregating the observed plumes into cores and edges, we infer that particle aging, evaporation, and coagulation occurred before the first measurement, and we find that edges generally undergo higher increases in oxidation tracers, more decreases in semivolatile compounds, and less coagulation than the cores. [ABSTRACT FROM AUTHOR]

An evaluation of the performance and accuracy of a Cavity Attenuated Phase-Shift Single Scattering Albedo Monitor (CAPS PMssa, Aerodyne Res. Inc.) was conducted in an optical closure study with proven technologies: Cavity Attenuated Phase-Shift Particle Extinction Monitor (CAPS PMex, Aerodyne Res. Inc.); 3-wavelengh Integrating Nephelometer (TSI Model 3563); and 3-wavelength filter-based Particle Soot Absorption Photometer (PSAP, Radiance Research). The evaluation was conducted by connecting the instruments to a controlled aerosol generation system and comparing the measured scattering, extinction, and absorption coefficients measured by the CAPS PMssa with the independent measurements. Three different particle types were used to generate aerosol samples with single-scattering albedos (SSA) ranging from 0.4 to 1.0 at 630 nm wavelength. The CAPS PMssa measurements compared well with the proven technologies. Extinction measurement comparisons exhibited a slope of the linear regression line for the full data set of 0.96 (-0.02/+0.06), an intercept near zero, and a regression coefficient R² > 0.99; whereas, scattering measurements had a slope of 1.01 (-0.07/+0.06), an intercept of less than +/-2 x 10-6 m-1 (Mm-1), and a coefficient R² ∼ 1.0. The derived CAPS PMssa absorption compared well to the PSAP measurements at low levels (< 70 Mm-1) for the small particle sizes and modest (0.4 to 0.6) SSA values tested, with a linear regression slope of 1.0, an intercept of -4 Mm-1, and a coefficient R² = 0.97. Comparisons at higher particle loadings were compromised by loading effects on the PSAP filters. For the SSA measurements, agreement was highest (regression slopes within 1% ) for SSA = 1.0 particles, though the difference between the measured values increased to 9 % for extinction coefficients lower than 55 Mm-1. SSA measurements for absorbing particles exhibited absolute differences up to 18 %, though it is not clear which measurement had the lowest accuracy. For a given particle type, the CAPS PMssa instrument exhibited the lowest scatter around the average. This study demonstrates that the CAPS PMssa is a robust and reliable instrument for the direct measurement of the scattering and extinction coefficients and thus SSA. This conclusion also holds as well for the indirect measurement of the absorption coefficient with the constraint that the accuracy of this particular measurement degrades as the SSA and particle size increases. [ABSTRACT FROM AUTHOR]

The water activity of ammonium nitrate microparticles is determined as a function of composition down to 12% relative humidity by accounting for the rapid evaporation of ammonia and nitric acid. It was concluded that if a deliquescent particle is contaminated by a solid organic inclusion, the particle may not remain hygroscopic at low RH due to a higher ERH and thus exists as a small crystalline particle.