Search

The overall objective of this study was to evaluate the behavior of different codend designs to provide basic information that is relevant for implementing technical management measures, improving selectivity and catch quality, and reducing energy consumption. Six different codend designs were evaluated: a traditional diamond mesh codend; a T90 codend (meshes turned 90°); a Bacoma codend with diamond meshes in the lower panel and square meshes in the upper panel; a Bacoma codend with the square meshes orientated in the T0 direction; a two panel square mesh codend; and a four panel square mesh codend. The codends were tested in a flume tank with flow of 1.8 knots/h. A simulated catch of 500 kg was placed in the tested codend. A motion tracking system was used with four track markers placed on each of three successive cross-sections and a single marker at the end of the codend. This made it possible to assess and compare the movements of the codend and the netting in three dimensions. The drag of the codends also was measured and compared.

International audience; no abstract

Soak duration in the gillnet fisheries can vary from a few hours to several days. The industry reports a variation of soak tactics between target species, but also between seasons for the same species. These are determined by the robustness of the target species and the catch of unwanted species. Different soak tactics were compared to estimate the role that the choice of a soak tactic plays in the catch efficiency of both target and unwanted species. In the Danish summer gillnet fishery targeting plaice (Pleuronectes platessa) , nets are deployed approximately 12 h (h) during day. Unwanted species are common dab ( Limanda limanda ) and edible crab ( Cancer pagurus ). The commercially used 12 h deployment during day was compared to 12 h deployment during night and 24 h deployment. On average, there were about 1.5 more catches of commercial size plaice (above 27 cm), and 2 and 4 times less catches of the unwanted dab and edible crab, respectively, for 12 h at day compared to the other soak tactics (12 h at night or 24 h). Gillnetters participating in the coastal summer fishery for plaice follow the theoretical optimal soak tactic. The commercially used 12 h deployment during day maximises the catch of commercial sized plaice and limits handling time by catching less unwanted dab and crabs.

Norway lobster Nephrops norvegicus fisheries are often characterized by high bycatch and discard rates. However, fisheries species exhibit differences in vertical behaviour that can be used to develop selective devices. We developed a separator frame that can be inserted into the forward part of a cod-end to divide it into a bottom cod-end and a top cod-end. In the top cod-end we inserted a 3-m-long window constructed of 274-mm mesh. The separator frame was tested from a commercial vessel in the Kattegat and Skagerrak area. Small mesh net bags were used to collect the catch going through the separator frame and ending up in the bottom cod-end, the top cod-end, or penetrating the window. The majority of Norway lobster and flatfish entered the bottom cod-end, and most gadoids entered the top cod-end. A relatively high proportion of gadoids and flatfish that entered the top cod-end penetrated the window. The separation was size dependant for some of the investigated species.

Danish seines and bottom trawls operate differently and have different catching processes. Both gears belong to the same legislative category in European fisheries, but different management strategies in other countries and criticism by fishers on grouping Danish seines and trawls together indicate disagreement on current gear classification. This study compared both gears in terms of their fishing characteristics and catches of commercial species based on 16 years of observer data. Danish seining is a specialised fishing method that targeted few species but with higher total catch rates than bottom trawlers. Bottom trawling is a more all-purpose fishing method that targets a larger number of species, and bottom trawlers use larger engines than Danish seiners. A generalised additive mixed model indicated that catch rates of flatfish are generally higher for Danish seines, and catch rates of roundfish species are higher for trawlers. The results do not directly suggest a separation of the gears in terms of legislation as the quantities of fish below current minimum size were similar, but for example future survival studies may reach different conclusions. Additional factors were found to be important in determining catches of both gears.

Antihydrogen atoms are now routinely trapped in small numbers. One of the purposes of this effort is to make precision comparisons of the 1S-2S transition in hydrogen and antihydrogen as a precision test of the CPT theorem. We investigate, through calculations and simulations, various methods by which the 1S-2S transition may be probed with only a few trapped atoms. We consider the known constraints from typical experimental geometries, detection methods, sample temperatures, laser light sources etc and we identify a viable path towards a measurement of this transition at the 10(-11) level in a realistic scenario. We also identify ways in which such a first measurement could be improved upon as a function of projected changes and improvements in antihydrogen synthesis and trapping. These calculations recently guided the first observation of the 1S-2S transition in trapped antihydrogen.

The observation of hyperfine structure in atomic hydrogen by Rabi and co-workers1,2,3 and the measurement4 of the zero-field ground-state splitting at the level of seven parts in 1013 are important achievements of mid-twentieth-century physics. The work that led to these achievements also provided the first evidence for the anomalous magnetic moment of the electron5,6,7,8, inspired Schwinger’s relativistic theory of quantum electrodynamics9,10 and gave rise to the hydrogen maser11, which is a critical component of modern navigation, geo-positioning and very-long-baseline interferometry systems. Research at the Antiproton Decelerator at CERN by the ALPHA collaboration extends these enquiries into the antimatter sector. Recently, tools have been developed that enable studies of the hyperfine structure of antihydrogen12—the antimatter counterpart of hydrogen. The goal of such studies is to search for any differences that might exist between this archetypal pair of atoms, and thereby to test the fundamental principles on which quantum field theory is constructed. Magnetic trapping of antihydrogen atoms13,14 provides a means of studying them by combining electromagnetic interaction with detection techniques that are unique to antimatter12,15. Here we report the results of a microwave spectroscopy experiment in which we probe the response of antihydrogen over a controlled range of frequencies. The data reveal clear and distinct signatures of two allowed transitions, from which we obtain a direct, magnetic-field-independent measurement of the hyperfine splitting. From a set of trials involving 194 detected atoms, we determine a splitting of 1,420.4 ± 0.5 megahertz, consistent with expectations for atomic hydrogen at the level of four parts in 104. This observation of the detailed behaviour of a quantum transition in an atom of antihydrogen exemplifies tests of fundamental symmetries such as charge–parity–time in antimatter, and the techniques developed here will enable more-precise such tests.

Vibrational coupled-cluster (VCC) theory provides an accurate method for calculating vibrational spectra and properties of small to medium-sized molecules. Obtaining these properties requires the solution of the non-linear VCC equations which can in some cases be hard to converge depending on the molecule, the basis set, and the vibrational state in question. We present and compare a range of different algorithms for solving the VCC equations ranging from a full Newton-Raphson method to approximate quasi-Newton models using an array of different convergence-acceleration schemes. The convergence properties and computational cost of the algorithms are compared for the optimization of VCC states. This includes both simple ground-state problems and difficult excited states with strong non-linearities. Furthermore, the effects of using tensor-decomposed solution vectors and residuals are investigated and discussed. The results show that for standard ground-state calculations, the conjugate residual with optimal trial vectors algorithm has the shortest time-to-solution although the full Newton-Raphson method converges in fewer macro-iterations. Using decomposed tensors does not affect the observed convergence rates in our test calculations as long as the tensors are decomposed to sufficient accuracy.

We present a new integral format for 4-index electron repulsion integrals, in which several strategies like the Resolution-of-the-Identity (RI) approximation and other more general tensor-decomposition techniques are combined with an atomic batching scheme. The 3-index RI integral tensor is divided into sub-tensors defined by atom pairs on which we perform an accelerated decomposition to the canonical product (CP) format. In a first step, the RI integrals are decomposed to a high-rank CP-like format by repeated singular value decompositions followed by a rank reduction, which uses a Tucker decomposition as an intermediate step to lower the prefactor of the algorithm. After decomposing the RI sub-tensors (within the Coulomb metric), they can be reassembled to the full decomposed tensor (RC approach) or the atomic batched format can be maintained (ABC approach). In the first case, the integrals are very similar to the well-known tensor hypercontraction integral format, which gained some attraction in recent years since it allows for quartic scaling implementations of MP2 and some coupled cluster methods. On the MP2 level, the RC and ABC approaches are compared concerning efficiency and storage requirements. Furthermore, the overall accuracy of this approach is assessed. Initial test calculations show a good accuracy and that it is not limited to small systems.

It is demonstrated how the second-quantisation formulation of multi-mode dynamics leads to expressions for vibrational density matrices. The properties and different representations of these matrices are discussed. Diagonalising the one-mode density matrices defines a set of natural modals for each vibrational mode. The theory and first implementation of the iterative natural modals (ItNaMo) method for correlated vibrational structure models is presented. In the ItNaMo method, natural modals are used as basis functions for a subsequent correlated calculation. This optimisation of the one-mode basis is repeated until the changes in the basis functions become sufficiently small. Ground-state and excited-state energy calculations are presented for water, formaldehyde and ethylene. It is shown that using optimised coordinates for the water calculation makes the occupation numbers converge to zero much faster and thereby allows for large reductions in the required number of basis functions. For the higher-order wave-function models the ItNaMo method results in smaller energy errors compared to full vibrational configuration interaction and thereby facilitates a more accurate description of the wave function.

Due to generally high discard rates in Norway lobster ( Nephrops norvegicus ) fisheries, a discard ban coming up and to the cod recovery plan in several areas, selective sorting grids have been tested in many areas and are specified by legislation for use in the Kattegat and Skagerrak area bordering Norway, Denmark and Sweden. Grids are very selective, but they can lead to loss of landable Norway lobster and valuable fish species. To improve retention of these species, we developed three new grids using made by polyurethane to make them flexible: One grid had horizontal bars, one had vertical bars, and one had vertical bars and a guiding funnel in front of the grid. Four unselective net bags were used to collect the catch escaping through different parts of the grid or escaping without passing through the grid. Water flow around the grid bars was measured in a flume tank. The three grids were tested from a commercial trawler in the Kattegat and Skagerrak area. Underwater filming was conducted to assess grid performance and fish behavior. Results showed that a bottom hole in the lower part of the grid allowed species in the lower part of the gear to pass and retained in the bag behind the hole. More flatfish passed the grid with horizontal bars compared to that with vertical bars, but the retention rate was still low. Use of the guiding funnel increased the contact with the grid considerably for both target and unwanted species. In all three grid designs, there were losses of Norway lobster above minimum landing size.

The reformed European Common Fisheries Policy introduced a discard ban, with a possibility of exempting species where a high discard survival can be demonstrated. This necessitates a validation of the methods used for estimating the discard mortality of candidate species. In this study, we assess whether reflex impairment can predict short-term mortality in commercially trawled European plaice upon landing and after air exposure of up to 90 min. Sub-lethal stress was assessed by a suite of physiological variables. Over a 10-day period, mortality was monitored for a total of 199 plaice following trawl and air exposure of varying duration, and for 50 control fish scored for reflex impairment on board the vessel. Mortality was only observed in fish exposed to air for >60 min, and averaged 11.1% (95% CI = 7.1–16.3%). Reflex impairment was found to be a significant (P

Danish seining (or anchor seining) is a fishing technique that is gaining increasing attention because it is considered to be a fuel-efficient fishing method with low environmental impact. However, scientific documentation of the selectivity characteristics of Danish seines is lacking, and the gear generally is grouped with bottom trawls and Scottish seines in fisheries management legislation. In this study, we developed a codend cover to estimate the selectivity of a standard commercial Danish seine codend for four fish species. The data for the dominant species, dab (Limanda limanda) and plaice (Pleuronectes platessa), was best described by models that combine two or three logistic models, which indicated that more than one selection process was at work. Selectivity of cod (Gadus morhua) was best described by a Richard curve and selectivity of red gurnard (Chelidonichthys lucernus) by a logistic curve. The estimated selectivity curve of dab indicated, contrary to cod and plaice, low retention of individuals below MLS. Confidence limits for larger length classes of cod and red gurnard were relatively wide. For plaice, the estimated selection factor, which is the length with 50% retention divided by mesh size, was comparable to literature values from trawl studies. The average value for cod was similar for Danish and Scottish seines, but lower for trawls. The results are discussed in the context of fisheries management with focus on the landing obligation of the new Common Fisheries Policy.

Detailed comparisons of antihydrogen with hydrogen promise to be a fruitful test bed of fundamental symmetries such as the CPT theorem for quantum field theory or studies of gravitational influence on antimatter. With a string of recent successes, starting with the first trapped antihydrogen and recently resulting in the first measurement of a quantum transition in anti-hydrogen, the ALPHA collaboration is well on its way to perform such precision comparisons. We will discuss the key innovative steps that have made these results possible and in particular focus on the detailed work on positron and antiproton preparation to achieve antihydrogen cold enough to trap as well as the unique features of the ALPHA apparatus that has allowed the first quantum transitions in anti-hydrogen to be measured with only a single trapped antihydrogen atom per experiment. We will also look at how ALPHA plans to step from here towards more precise comparisons of matter and antimatter.

Equations are derived for the time evolution of time-dependent vibrational coupled cluster (TDVCC) wave functions covering both the TDVCC ket state and the associated so-called Λ bra state. The equations are implemented in the special case of both the Hamiltonian and the cluster operator containing at most two-mode coupling terms. The nontrivial behavior of the evolution of norm, energy, and expectation values due to the nonunitary time-evolution of the nonvariational TDVCC theory is analyzed theoretically and confirmed in numerical experiments that also include time-dependent Hamiltonians. In the spirit of time-independent size-consistency analysis, the separability of both the coupled cluster and Λ states for noninteracting systems is studied. While the coupled cluster state clearly has the correct behavior, the behavior of the Λ state is more intricate, and the consequence for different properties is shown theoretically and numerically. Overall, the numerical experiments show that TDVCC in incomplete expansions gives higher accuracy than a standard linear variational wave function parameterization with the same number of independent parameters, while equivalent results are obtained for complete expansions. The efficiency of the methodology is illustrated in computations on polycyclic aromatic hydrocarbons with up to 156 modes.

Herrmann, B., Mieske, B., Stepputtis, D., Krag, L. A., Madsen, N., and Noack, T. 2013. Modelling towing and haul-back escape patterns during the fishing process: a case study for cod, plaice, and flounder in the demersal Baltic Sea cod fishery. – ICES Journal of Marine Science, 70: 850–863. The survival likelihood of fish escaping through trawl codends may depend on when they escape. It is therefore relevant to investigate when during the fishing process fish actually attempt to escape and do escape from trawl codends. This subject is addressed by modelling data collected during a specially designed experiment. Results demonstrate that the escape process during towing cannot be described sufficiently by a traditional logistic model or something similar. Instead, a model is required that explicitly considers that not all fish necessarily contact the codend netting to attempt escape during the towing phase. A model that accounts for such behaviour is applied and it is demonstrated that this model can adequately describe the size selection process during towing. The overall escape process, which consists of the attempt probability, partial escape during towing, and partial escape during the haul-back phase, is also modelled. This proposed model sufficiently described the observed escape pattern for cod (Gadus morhua), plaice (Pleuronectes platessa), and flounder (Platichtys flesus). For all three species, a significant percentage of the individuals entering the codends during fishing first attempt to escape during the haul-back operation.

The proportion of Atlantic cod (Gadus morhua) discarded in the Danish Baltic Sea cod trawl fishery has been as high as 40%. This, combined with a stock that has declined dramatically over the past 30 years, has led to numerous technical regulations being introduced to reduce the capture of juveniles and thus discards. One method that has been widely adopted in the Baltic Sea has been to improve gear selectivity, subsequently allowing young individuals to escape capture. To understand the effects that changes to gear selectivity and minimum landing size have had on discard rates, as well as the effects of a range of additional explanatory factors, generalized additive mixed models were used. Gear regulation changes enforced in the Danish demersal trawl fishery in the Baltic Sea and other factors, such as minimum landings size, juvenile abundance, catch mass, price, and their spatial and temporal distribution, were found to significantly affect discard rates. The newest and currently legislated gears were identified as having the lowest discard rates. The increase in minimum landing size from 35 to 38 cm has increased discard rates.

We describe recent experiments at CERN in which antihydrogen, an atom made entirely of antimatter, has been held in a magnetic minimum neutral atom trap and subjected to microwave radiation to induce a resonant quantum transition in the anti-atom. We discuss how this, the first experiment to observe an interaction between an antihydrogen atom and a photon, was achieved. We provide some background to antimatter physics and cover aspects of the current motivation for our experiments.

The 1S–2S transition in magnetically trapped atoms of antihydrogen is observed, and its frequency is shown to be consistent with that expected for hydrogen. Testing to high precision whether matter behaves like antimatter could provide clues to one of the biggest puzzles in modern physics: why does the observable Universe consist almost entirely of matter? After all, the Standard Model predicts that after the Big Bang the Universe should have been made up of equal amounts of matter and antimatter. Antimatter is difficult to produce and characterize because it annihilates when it comes in contact with matter. But recent advances at CERN's Antiproton Decelerator have allowed researchers to trap and measure both antiprotons and antihydrogen. Now the ALPHA Collaboration at CERN reports the first spectroscopic characterization of antihydrogen, exciting the 1S to 2S transition with laser light. The transition frequency is consistent with that of hydrogen. The spectrum of ordinary hydrogen has been characterized to extremely high precision, so improvements in antihydrogen spectroscopy will yield highly sensitive tests of matter–antimatter symmetry. The spectrum of the hydrogen atom has played a central part in fundamental physics over the past 200 years. Historical examples of its importance include the wavelength measurements of absorption lines in the solar spectrum by Fraunhofer, the identification of transition lines by Balmer, Lyman and others, the empirical description of allowed wavelengths by Rydberg, the quantum model of Bohr, the capability of quantum electrodynamics to precisely predict transition frequencies, and modern measurements of the 1S–2S transition by Hansch1 to a precision of a few parts in 1015. Recent technological advances have allowed us to focus on antihydrogen—the antimatter equivalent of hydrogen2,3,4. The Standard Model predicts that there should have been equal amounts of matter and antimatter in the primordial Universe after the Big Bang, but today’s Universe is observed to consist almost entirely of ordinary matter. This motivates the study of antimatter, to see if there is a small asymmetry in the laws of physics that govern the two types of matter. In particular, the CPT (charge conjugation, parity reversal and time reversal) theorem, a cornerstone of the Standard Model, requires that hydrogen and antihydrogen have the same spectrum. Here we report the observation of the 1S–2S transition in magnetically trapped atoms of antihydrogen. We determine that the frequency of the transition, which is driven by two photons from a laser at 243 nanometres, is consistent with that expected for hydrogen in the same environment. This laser excitation of a quantum state of an atom of antimatter represents the most precise measurement performed on an anti-atom. Our result is consistent with CPT invariance at a relative precision of about 2 × 10−10.

© 2016 Macmillan Publishers Limited. All rights reserved. Antimatter continues to intrigue physicists because of its apparent absence in the observable Universe. Current theory requires that matter and antimatter appeared in equal quantities after the Big Bang, but the Standard Model of particle physics offers no quantitative explanation for the apparent disappearance of half the Universe. It has recently become possible to study trapped atoms - of antihydrogen to search for possible, as yet unobserved, differences in the physical behaviour of matter and antimatter. Here we consider the charge neutrality of the antihydrogen atom. By applying stochastic acceleration to trapped antihydrogen atoms, we determine an experimental bound on the antihydrogen charge, Qe, of |Q| < 0.71 parts per billion (one standard deviation), in which e is the elementary charge. This bound is a factor of 20 less than that determined from the best previous measurement of the antihydrogen charge. The electrical charge of atoms and molecules of normal matter is known to be no greater than about 10-21e for a diverse range of species including H2, He and SF6. Charge-parity-time symmetry and quantum anomaly cancellation demand that the charge of antihydrogen be similarly small. Thus, our measurement constitutes an improved limit and a test of fundamental aspects of the Standard Model. If we assume charge superposition and use the best measured value of the antiproton charge, then we can place a new limit on the positron charge anomaly (the relative difference between the positron and elementary charge) of about one part per billion (one standard deviation), a 25-fold reduction compared to the current best measurement.

Magnetically trapped antihydrogen atoms at low temperatures were used to test the charge neutrality of this antiatomic system, by precisely placing a limit to its electrical charge. A new method for measuring the gravitational interaction of antimatter was also developed, and prospects for making a precise measurement of this interaction are discussed. Finally, progress towards a precise, direct test of CPT symmetry by laser spectroscopy of antihydrogen is presented.

Systems that take discrete samples of the catch while trawling are widely used in fisheries investigations. We have developed the Minisampler, a relatively small system to be used particularly on small vessels and small trawls. The device is simple, has low weight and is reasonably cheap to make. The Minisampler consists of a tele-command deck unit, a dunking transducer, a stainless steel frame and one or two acoustical trigger-units. Each of them releases a metal bar that opens/closes a collecting bag. Thus is possible to take two or three remotely controlled discrete samples during a tow. We tested the system successfully in a flume tank and during sea trials from a commercial trawler. The Minisampler is a multi-purpose tool and provides opportunity for new experimental designs to improve scientific work using demersal or pelagic trawls in marine or freshwater environments.

In this study, we compared the size selectivity of a T 90 codend (netting turned by 90 degrees) with that of a standard codend made of similar netting. Sea trials were conducted in a Norway lobster directed fishery in the Kattegat-Skagerrak area, where there is a need for improved selectivity because of a severe discard problem. The codends were tested by fishing simultaneously with them in a twin trawl rig. Codend covers mounted with Minisamplers were used, which made it possible to catch individuals escaping during towing and haul-back separately. Herein we proposed a model to assess the sequential selection during towing and haul back. This model takes into account the parameter C tow , which can be interpreted as the proportion of fish that comes into contact with the codend meshes during towing and, thereby, has a chance of escape. Compared to the standard codend, the T 90 codend retained fewer Norway lobster both below and above the legal minimum landing size (40 mm, cephalothorax length), thereby causing a reduction of commercial catch. The difference was mainly due to a significantly higher escape rate during towing for the T 90 codend. For plaice below minimum landing size (27 cm), the retention was slightly but significantly higher for the T 90 codend compared to the standard codend. A model developed for both codends showed that not all plaice are able to attempt escapement during the towing process. For cod, the results indicated an increased L 50 (the length at which 50% of this species is caught) for the T 90 codend, but the effect was not statistically significant, probably due to the limited number of cod retained during the sea trials. The results demonstrated that, for all three species, a significant proportion did escape during haul-back in both codends.

The ALPHA project is an international collaboration, based at CERN, with the experimental goal of performing precision spectroscopic measurements on antihydrogen. As part of this endeavor, the ALPHA experiment includes a silicon tracking detector. This detector consists of a three-layer array of silicon modules surrounding the antihydrogen trapping region of the ALPHA apparatus. Using this device, the antihydrogen annihilation position can be determined with a spatial resolution of better than 5 mm. Knowledge of the annihilation distribution was a critical component in the recently successful antihydrogen trapping effort. This paper will describe the methods used to reconstruct annihilation events in the ALPHA detector. Particular attention will be given to the description of the background rejection criteria.

Precision comparisons of hyperfine intervals in atomic hydrogen and antihydrogen are expected to yield experimental tests of the CPT theorem. The CERN-based ALPHA collaboration has initiated a program of study focused on microwave spectroscopy of trapped ground-state antihydrogen atoms. This paper outlines some of the proposed experiments, and summarizes measurements that characterize microwave fields that have been injected into the ALPHA apparatus.

Precision spectroscopic comparison of hydrogen and antihydrogen holds the promise of a sensitive test of the Charge-Parity-Time theorem and matter-antimatter equivalence. The clearest path towards realising this goal is to hold a sample of antihydrogen in an atomic trap for interrogation by electromagnetic radiation. Achieving this poses a huge experimental challenge, as state-of-the-art magnetic-minimum atom traps have well depths of only ∼1 T (∼0.5 K for ground state antihydrogen atoms). The atoms annihilate on contact with matter and must be ‘born’ inside the magnetic trap with low kinetic energies. At the ALPHA experiment, antihydrogen atoms are produced from antiprotons and positrons stored in the form of non-neutral plasmas, where the typical electrostatic potential energy per particle is on the order of electronvolts, more than 104 times the maximum trappable kinetic energy. In November 2010, ALPHA published the observation of 38 antiproton annihilations due to antihydrogen atoms that had been trapped for at least 172 ms and then released—the first instance of a purely antimatter atomic system confined for any length of time (Andresen et al., Nature 468:673, 2010). We present a description of the main components of the ALPHA traps and detectors that were key to realising this result. We discuss how the antihydrogen atoms were identified and how they were discriminated from the background processes. Since the results published in Andresen et al. (Nature 468:673, 2010), refinements in the antihydrogen production technique have allowed many more antihydrogen atoms to be trapped, and held for much longer times. We have identified antihydrogen atoms that have been trapped for at least 1,000 s in the apparatus (Andresen et al., Nature Physics 7:558, 2011). This is more than sufficient time to interrogate the atoms spectroscopically, as well as to ensure that they have relaxed to their ground state.

In efforts to trap antihydrogen, a key problem is the vast disparity between the neutral trap energy scale (\(\sim\!50\,\upmu\mathrm{eV}\)), and the energy scales associated with plasma confinement and space charge (~1 eV). In order to merge charged particle species for direct recombination, the larger energy scale must be overcome in a manner that minimizes the initial antihydrogen kinetic energy. This issue motivated the development of a novel injection technique utilizing the inherent nonlinear nature of particle oscillations in our traps. We demonstrated controllable excitation of the center-of-mass longitudinal motion of a thermal antiproton plasma using a swept-frequency autoresonant drive. When the plasma is cold, dense and highly collective in nature, we observe that the entire system behaves as a single-particle nonlinear oscillator, as predicted by a recent theory. In contrast, only a fraction of the antiprotons in a warm or tenuous plasma can be similarly excited. Antihydrogen was produced and trapped by using this technique to drive antiprotons into a positron plasma, thereby initiating atomic recombination. The nature of this injection overcomes some of the difficulties associated with matching the energies of the charged species used to produce antihydrogen.

Species-specific differences in morphology and minimum landing size will often result in high discard rates in mixed-species fisheries. This is the case in the Danish Nephrops -directed fishery and the aim of this study was to improve the size selectivity of Nephrops without increasing catch below minimum landing size (MLS) of cod ( Gadus morhua ) and plaice ( Pleuronectes platessa ). A new codend concept combining square meshes and diamond meshes in a four-panel configuration was developed and tested in the Kattegat and Skagerrak. A 5 m long 70 mm square-mesh panel was inserted in the lower panel of the codend to increase size selectivity of Nephrops while the remaining three panels were made of standard 90 mm diamond-mesh netting to maintain selectivity of plaice and cod. The concept succeeded in significantly ( p L 50 of Nephrops without increasing discards of either plaice or cod. When using the new codend concept, expected numbers of Nephrops below MLS (carapace length = 40 mm) were reduced by approximately 37% but the expected weight of marketable catch was also reduced by 21%. The concept was adjusted and tested in a second experiment so that fishing using the new net configuration would remain commercially viable. This experiment indicated that size selectivity of Nephrops could be adjusted by changing the square-mesh panel but differences in mean selection between the gears were insignificant. We introduce a new analytical approach with increased statistical power to detect differences in selection parameters between different codends.

In the past, experimental fishing with square mesh codends was conducted with the expectation that this would lead to a better defined size selection indicated by a smaller selection range (SR) of haddock ( Melanogrammus aeglefinus ) and other gadoid species compared to that provided by traditional diamond mesh codends. However, experimental results demonstrated considerable between-haul variations in the selection parameters (L50 and SR). It was speculated that these results could be linked to differences in morphology of individual haddock of the same length. In the present study we assessed which measures of haddock morphology are important for size selection through meshes. We quantified between-individual variation in morphology and used simulation techniques to estimate that this variation can account for less than 28% (range 15–28%) of the SR values found during experimental fishing. By including a realistic range of mesh openings when simulating the fishing process of a square mesh codend, we were able to explain most of the experimental results. Additionally, we used our method to better understand the seasonal variation in size selectivity reported in the literature and to predict the basic selective properties for haddock for other mesh shapes. Finally, we found that the conditions of our model, which describes mesh penetration for haddock based on assessment of morphology, is very similar to the conditions previously applied in the literature to study size selection of haddock in diamond mesh codends.

Spectroscopy of antihydrogen has the potential to yield high-precision tests of the CPT theorem and shed light on the matter-antimatter imbalance in the Universe. The ALPHA antihydrogen trap at CERN's Antiproton Decelerator aims to prepare a sample of antihydrogen atoms confined in an octupole-based Ioffe trap and to measure the frequency of several atomic transitions. We describe our techniques to directly measure the antiproton temperature and a new technique to cool them to below 10 K. We also show how our unique position-sensitive annihilation detector provides us with a highly sensitive method of identifying antiproton annihilations and effectively rejecting the cosmic-ray background., 10 pages, 5 figures

Antihydrogen spectroscopy promises precise tests of the symmetry of matter and antimatter, and can possibly offer new insights into the baryon asymmetry of the universe. Antihydrogen is, however, difficult to synthesize and is produced only in small quantities. The ALPHA collaboration is therefore pursuing a path towards trapping cold antihydrogen to permit the use of precision atomic physics tools to carry out comparisons of antihydrogen and hydrogen. ALPHA has addressed these challenges. Control of the plasma sizes has helped to lower the influence of the multipole field used in the neutral atom trap, and thus lowered the temperature of the created atoms. Finally, the first systematic attempt to identify trapped antihydrogen in our system is discussed. This discussion includes special techniques for fast release of the trapped anti-atoms, as well as a silicon vertex detector to identify antiproton annihilations. The silicon detector reduces the background of annihilations, including background from antiprotons that can be mirror trapped in the fields of the neutral atom trap. A description of how to differentiate between these events and those resulting from trapped antihydrogen atoms is also included.

Madsen, N., and Valentinsson, D. 2010. Use of selective devices in trawls to support recovery of the Kattegat cod stock: a review of experiments and experience. – ICES Journal of Marine Science, 67: 2042–2050. The spawning-stock biomass of cod (Gadus morhua) in the Kattegat area is at a historically low level. Throughout the past decade considerable efforts have been devoted to research on improving both species and size selectivity of the trawls used in the mixed demersal fishery in the area, because this provides a valuable management tool for reducing the bycatch of cod and reducing mortality, and thus helping to rebuild the depleted stock. Gear research in the area has been focused on devices that allow for continued exploitation of the Norway lobster (Nephrops norvegicus) and flatfish, but minimizing the bycatch. We review the results of previous and continuing experiments with various codend mesh sizes, mesh configurations, escape windows, sorting grids, sorting frames, and separator panels, but also changes in whole-trawl designs. Based on our review, we compare and discuss the gear-related technical measures and their effectiveness in maintaining a commercial fishery on viable stocks, yet protecting cod. We discuss the results in relation to changes in legislation and experience with implementation of new selective devices in recent years. We also discuss ways to create stronger incentives for fishers to participate in gear research and to increase acceptance of more selective gears.

Frandsen, R. P., Madsen, N., and Krag, L. A. 2010. Selectivity and escapement behaviour of five commercial fishery species in standard square- and diamond-mesh codends. – ICES Journal of Marine Science, 67: 1721–1731. The Danish fishery for Nephrops (Nephrops norvegicus) is often conducted in a mixed-species setting, characterized by high rates of discards of several target species, including Nephrops and cod (Gadus morhua). Experiments were conducted to investigate and compare the selective properties of a standard 70 mm square-mesh codend (standard SMC) and a standard 90 mm diamond-mesh codend (standard DMC). Selectivity estimates for five commercial species are provided for both codends. The standard SMC yielded higher estimates of length at 50% retention/mesh size (hereafter SF) for Nephrops and roundfish than did the standard DMC, but no effect of codend type on SF was found for plaice (Pleuronectes platessa). Moreover, a novel codend cover design allowed assessment of the preferred direction of escapement in the codend. Whiting (Merlangius merlangus) and Nephrops showed pronounced, but opposite, vertical preference in the direction of escapement, with whiting escaping upwards and Nephrops downwards. A significant (p < 0.05) difference in the direction of escapement between the two codends was found for haddock (Melanogrammus aeglefinus) and whiting. Owing to the relatively small catches, the outcome is probably most applicable to Nephrops-directed fisheries under similar conditions, and caution should be taken not to extrapolate the results to other fisheries.

Due to declining cod (Gadus morhua) stocks, the Baltic Sea was one of the first areas regulated by the European Communities where selective escape windows were implemented to improve the exploitation pattern. Increasing discard rates and the potential for a significant increase of the spawning stock and the yield of the fishery are important reasons to further improve the selectivity of the fishery and to asses the potential next step in this process. In this study, we tested three relatively different design concepts, in the Baltic cod pelagic trawl fishery, that are relevant to past or present legislation and that were developed to meet requirements of increased selectivity performance. A standard nominal 135 mm diamond mesh codend, a codend with two nominal 125 mm bottom windows, and a codend with a nominal 125 mm nominal top window were tested using the covered codend method. A Danish and a Swedish commercial vessel were used for the sea trials to account for potential differences between vessels. Potential differences among the three gear variants were assessed by a two-step mixed effects model. The codend catch weight was found to have a significant effect on the selectivity in some cases. We assessed the actual effect of the selectivity performance on the immediate reductions of the proportions of cod being retained below and above the present minimum landing size (MLS) and a potential increased MLS.

Antihydrogen production in a neutral atom trap formed by an octupole-based magnetic field minimum is demonstrated using field-ionization of weakly bound anti-atoms. Using our unique annihilation imaging detector, we correlate antihydrogen detection by imaging and by field-ionization for the first time. We further establish how field-ionization causes radial redistribution of the antiprotons during antihydrogen formation and use this effect for the first simultaneous measurements of strongly and weakly bound antihydrogen atoms. Distinguishing between these provides critical information needed in the process of optimizing for trappable antihydrogen. These observations are of crucial importance to the ultimate goal of performing CPT tests involving antihydrogen, which likely depends upon trapping the anti-atom. Antihydrogen production in a neutral atom trap formed by an octupole-based magnetic field minimum is demonstrated using field-ionization of weakly bound anti-atoms. Using our unique annihilation imaging detector, we correlate antihydrogen detection by imaging and by field-ionization for the first time. We further establish how field-ionization causes radial redistribution of the antiprotons during antihydrogen formation and use this effect for the first simultaneous measurements of strongly and weakly bound antihydrogen atoms. Distinguishing between these provides critical information needed in the process of optimizing for trappable antihydrogen. These observations are of crucial importance to the ultimate goal of performing CPT tests involving antihydrogen, which likely depends upon trapping the anti-atom.

The selectivity for Nephrops (Nephrops norvegicus) in trawl codends generally is poor and the lack of steepness of the selection curve results in high discard rates and/or loss of legal-sized catch. This poor codend selectivity often is attributed to the irregular shape of Nephrops, which to some extent characterizes the problem as insoluble. In the present study, the FISHSELECT methodology was used to examine the selection process of the species in order to identify ways to improve selectivity. The use of three different modes of orientation for contact (contact modes) with the codend meshes explained most of the characteristics of the selection curves for Nephrops obtained experimentally. The contact mode with the smallest cross-section was optimal for mesh penetration and, when evaluated against experimental data, 87.5% of all Nephrops encountering the gear were estimated to meet the netting in this contact mode. The range of configurations of the meshes (e.g., opening angles in the diamond mesh netting) was determinative for the selectivity, and the selective process for Nephrops was found to take place along the entire length of the codend. Simulating selectivity in a diamond mesh codend in which the closed meshes in the forward part of the codend were replaced by more open meshes revealed that the selectivity for Nephrops can be efficiently improved.

This paper presents a quantitative approach to the study of fish behaviour in trawls with the aim of maintaining the catching efficiency of target species and reducing discards of unwanted bycatch. Differences in vertical distributions of species during passage through a trawl are used to sort the catch into separate compartments prior to size selection. It is demonstrated that behavioural differences may be utilized in separating species prior to size selection. Comparisons indicate that these patterns are consistent over replicate trials. Unlike cod (Gadus morhua), haddock (Melanogrammus aeglefinus), saithe (Pollachius virens), and whiting (Merlangius merlangus) do not change their vertical preference longitudinally in the trawl.

A rigid separator frame with three vertically stacked codends was used to study fish behaviour in the extension piece of a demersal trawl. A video camera recorded fish as they encountered the separator frame. Ten hauls were conducted in a mixed species fishery in the northern North Sea. Fish behaviour was analysed using the camera observations from several of these hauls by assigning seven descriptive attributes and also using catch data. Gadoids, in particular haddock (Melanogrammus aeglefinus), whiting (Merlangius merlangus), and saithe (Pollachius virens), were caught in the upper codend, whereas Nephrops (Nephrops norvegicus) were caught in the lower codends. Catches of flatfish were more uniformly distributed among the three codends. Unlike the flatfish, gadoids reacted to the presence of the separator frame. The camera method and the separator frame yielded different information about fish behaviour within the trawl, and together the two methods provided a more complete picture of the catching process. Behavioural observations, vertical distribution, and the methodology are discussed, as is the potential for improving species separation in demersal trawls.

This study illuminates a range of technological options relevant to present legislation for regulating fish by-catch in a small-meshed Nephrops fishery. The selection of cod, haddock, hake, lemon sole, Nephrops , plaice, saithe, witch, and whiting were evaluated using the twin-trawl technique for: (i) a 90 mm diamond mesh codend (standard codend); (ii) a standard codend with a 120 mm square mesh panel (SMP); and (iii) a standard codend with a 35/80 mm grid mounted in the extension piece to hinder access to the codend for large individuals. We used selection models to estimate selection parameters by species and confidence bands to compare the selective properties of different gear types. For cod, haddock, hake, Nephrops , plaice, and whiting we obtained estimates for all three gear variants, whereas we obtained estimates for lemon sole and witch only with the standard and the SMP codends and for saithe only for the SMP codend. The SMP significantly ( p Nephrops .

The FISHSELECT methodology, tools, and software were developed and used to measure the morphological parameters that determine the ability of cod to penetrate different mesh types, sizes, and openings. The shape of one cross-section at the cod's head was found to explain 97.6% of the mesh penetration results obtained in a laboratory experiment. Design guides predicting the 50% retention length (L50) of different mesh types, sizes, and openings were produced and compared with results from sea trials. Results show that the morphology-based simulations can be used to explain both the within-haul and the between-haul variations previously reported from sea trials. Finally, based on the results obtained, ideas to improve the size selection of cod in towed gear are presented.

We investigated the selectivity of cod ( Gadus morhua ) and haddock ( Melanogrammus aeglefinus ) escaping from three different selection systems (a conventional diamond-mesh codend, a codend fitted with escape windows, and a codend fitted with a sorting grid) using the covered codend technique. By using a MultiSampler attached to the codend cover to partition the collection of escaping fish, we were able to determine the partitioned selectivity of each of these devices at different phases during the towing process: at depth, during the haul back, and at the surface. The percentages of escaping fish at depth from the diamond-mesh codend were significantly lower than those estimated for the escape windows and sorting grid codends: almost 62% of cod and 79% of haddock escaping from the diamond-mesh codend did so at depth, whereas approximately 75% of cod and 93% of haddock escaped from the other two systems at depth. The partitioned selectivity parameters, l 50 and SR , were estimated and modelled for each of the three phases of the towing process and used to compare the selective properties of the three selection systems. A comparison was also made with a traditional whole haul selectivity analysis. Finally, bulk catch was added to the model as an explanatory variable and its effect upon selectivity was measured in both, partitioned and whole haul estimates.

The selectivity of a 99 mm trawl codend was assessed using a codend cover fitted with a MultiSampler, which was acoustically triggered to take separate samples at three different phases of the haul. The first sample was collected during towing, the second during haul-up and the third at the surface. A total of 18 hauls were conducted with a commercial fishing vessel west of Scotland. It was demonstrated that escape takes place not only during the tow but also in the short period when the trawl is hauled back from the seabed and when the codend is at the surface. For haddock (Melanogrammus aeglefinus), whiting (Merlangius merlangus) and Norway lobster (Nephrops norvegicus), respectively, the mean percentages escaping at the surface were 16, 12 and 38% of the total escape while 17, 8 and 28% escaped during the haul-up phase. Compared to towing, the escape rate (no./min) increased for haddock by a factor 2.7 during haul-up and by a factor 1.7 at the surface, whereas the escape rates of whiting were similar for the three phases. The escape rate of Norway lobster increased by a factor of approximately 7 for both the haul-up and surface phases, compared to the towing phase. The selectivity parameters L50 (50% retention length) and SR (selection range =L75–L25) were estimated and compared for the three different phases and for the whole haul for haddock, whiting and Norway lobster. For all three species there was no significant (P > 0.05) difference in L50 between the three phases of the haul. There was also no significant difference for whiting and Norway lobster when comparing the SR of the three phases, whereas the SR was significantly lower for haddock when comparing the surface phase with towing and haul-up. The estimate of L50 when towing was about 6 cm lower for haddock and whiting and 9 mm for Norway lobster compared to the selection curve estimated conventionally for the whole haul. Finally, the effect of sea state, duration and codend catch on the selectivity parameters were estimated for the individual phases and for the whole haul. A significant effect of at least one variable was found in all phases. 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Discarding of fish species in the Kattegat-Skagerrak Nephrops directed fisheries remains at high levels. In this work we have tested four sets of codends pair-wise with the catch comparison technique under full commercial conditions to assess their potential in reducing the catch of undersized commercial species, in particular cod. We investigate the position of a 90 mm square-mesh panel (SMP), the effect of increasing the mesh size from 90 to 120 mm in the SMP, the effect of inserting a 90 mm SMP in an 80 mm codend and the effect of increasing the codend mesh size from 90 to 120 mm in a total of 89 hauls. Inserting the SMP 3–6 m from the codline compared to 6–9 m from the codline, reduced catches of cod above the minimum landing size (MLS) and Nephrops above and below the MLS. Increasing the mesh size in the SMP from 90 to 120 mm increased the catch of cod above the MLS in weight with an overall increase of 12% in the revenue. The effect of installing a 90 mm SMP 6–9 m from the codline in a nominal 80 mm codend had no effect on the catch of cod. Increasing the nominal codend mesh size from 90 to 120 mm reduced the catch of all species below the MLS, except monkfish. Catches of Nephrops above the MLS were, however, reduced by approximately one third and the total loss in revenue was 21%.