Search

This paper gives an overview of the use of Electrochemical Noise (EN) for corrosion studying and monitoring. Since the quality and reliability of noise data are affected by a number of acquisition parameters, such as sampling interval, sampling duration, D.C. trend and instrumental noise, some experimental and practical aspects were discussed. The use of statistical parameters such as standard deviation, Pit Index and/or Localization Index and Noise Resistance to analyze noise data of corroding systems were examined. Many experimental applications of Electrochemical Noise Measurements on different metals and alloys were given. EN data have been compared with traditional electrochemical techniques. EN allowed to characterize the corrosion behavior of samples giving in some cases good quantitative estimation. The transposition of current and potential noise acquisition in the frequency domain (by Fast Fourier Transform and/or Maximum Entropy Method), gave further information on corrosion mechanism and in particular permitted to identify the type of corrosion. Finally the use of Discriminant Analysis permitted to deduce the best sampling frequency and sampling duration for EN acquisition, able to discriminate between two different situations. [ABSTRACT FROM AUTHOR]

Abstract: Fibrous poly(vinyl alcohol)/zirconia and poly(vinyl alcohol)/alumina nanohybrids were obtained by electrospinning technique, the applied voltage ranging between 12 and 16kV. The actual nanofiller content ranged between 2 and 9wt%. Electrospun nanohybrids consisted of uniform fibers free of defects. The average fiber diameter was around 600nm for all electrospun mats. Nano and/or submicrometric ceramic agglomerates were observed onto and inside the overall polymeric fibers. Nanohybrid mats containing the highest amounts of nanoparticles showed a significant reduction of crystallinity. All electrospun nanohybrids evidenced improved mechanical properties with respect to the neat PVA mat. The tensile modulus of PVA/Al2O3 and PVA/ZrO2 mats reached 350±40MPa and 190±55MPa, respectively, the value for the neat PVA being 90±20MPa. [Copyright &y& Elsevier]

Due to global environmental concerns related to climate change, the need to improve the service life of structures and infrastructures is imminently urgent. Structural elements typically suffer service life reductions, leading to poor environmental sustainability and high maintenance costs. Graphene oxide nanosheets (GONSs) effectively dispersed in a cement matrix can promote hydration, refine the microstructure and improve interfacial bonding, leading to enhanced building materials' performance, including mechanical strength and transport properties. Cement-based nanocomposites engineered with GONSs were obtained using two commercial nanofillers, a GO water suspension and a free-flowing GO nanopowder, characterized by fully comparable morphology, size and aspect ratio and different oxidation degrees (i.e., oxygen-to-carbon molar ratio), 0.55 and 0.45, respectively. The dosage of the 2D-nanofiller ranged between 0.01% and 0.2% by weight of cement. The electrical and thermal properties were assessed through electrochemical impedance spectroscopy (EIS) and a heat flow meter, respectively. The results were discussed and linked to micrometric porosity investigated by micro-computed tomography (μ-CT) and transport properties as determined by initial surface absorption test (ISAT), boil-water saturation method (BWS) and chloride ion penetration test. Extra-low dosage mortars, especially those loaded with a lower oxidation degree (i.e., 0.45GO), showed decreased permeability and improved barrier to chloride ion transport combined with enhanced thermal and electrical conductivity with respect to that of the control samples.

The increase in concrete structures' durability is a milestone to improve the sustainability of buildings and infrastructures. In order to ensure a prolonged service life, it is necessary to detect the deterioration of materials by means of monitoring systems aimed at evaluating not only the penetration of aggressive substances into concrete but also the corrosion of carbon-steel reinforcement. Therefore, proper data collection makes it possible to plan suitable restoration works which can be carried out with traditional or innovative techniques and materials. This work focuses on building heritage and it highlights the most recent findings for the conservation and restoration of reinforced concrete structures and masonry buildings.

The impact of extra-low dosage (0.01% by weight of cement) Graphene Oxide (GO) on the properties of fresh and hardened nanocomposites was assessed. The use of a minimum amount of 2-D nanofiller would minimize costs and sustainability issues, therefore encouraging the market uptake of nanoengineered cement-based materials. GO was characterized by X-ray Photoelectron Spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), Atomic Force Microscopy (AFM), X-ray Diffraction (XRD), and Raman spectroscopy. GO consisted of stacked sheets up to 600 nm × 800 nm wide and 2 nm thick, oxygen content 31 at%. The impact of GO on the fresh admixtures was evaluated by rheology, flowability, and workability measurements. GO-modified samples were characterized by density measurements, Scanning Electron Microscopy (SEM) analysis, and compression and bending tests. Permeability was investigated using the boiling-water saturation technique, salt ponding test, and Initial Surface Absorption Test (ISAT). At 28 days, GO-nanocomposite exhibited increased density (+14%), improved compressive and flexural strength (+29% and +13%, respectively), and decreased permeability compared to the control sample. The strengthening effect dominated over the adverse effects associated with the worsening of the fresh properties; reduced permeability was mainly attributed to the refining of the pore network induced by the presence of GO.

Poly(methyl methacrylate) resins containing chlorhexidine diacetate (CHX)-loaded mesoporous silicate MCM-41 have the ability to prevent Candida biofilm adhesion and growth over time. With the aim of increasing knowledge of the drug release and surface properties of these materials and their relationship with antibiofilm activity, in this paper an acrylic-based resin containing CHX-loaded spherical and narrow size silanized MCM-41 was prepared. Resins containing CHX but no filler were prepared as well and compared. Samples were characterized for polymerization degree, water sorption, and drug release. The sample capacity of inhibiting Candida biofilm adhesion and formation over time was evaluated. All samples were able to reduce the Candida biofilm mass over time. The resin containing CHX loaded into silanized MCM-41 mesopores resulted in less activity during the first 4 h but was able to maintain antibiofilm activity for a longer time. This effect was correlated to the prolonged CHX release and to the sample surface modifications observed after treatment with water and artificial saliva, evaluated by X-ray photoemission spectroscopy, scanning electron, and atomic force microscopies.

Magnesium alloys represent a valuable option for the production of bioresorbable implantable medical devices aimed to improve the therapeutic approach and minimize the potential risks related to biostable materials. In this regard, the degradation process needs to be carefully evaluated in order to assess the effectiveness of the regenerative support and the eventual toxic effects induced by the released corrosion products. Aluminium is one of the most common alloying element that raised several safety concerns, contributing to shift the investigation toward Al-free alloys. To delve into this issue, a long-term investigation (up to 28 days) was performed using AZ91D alloy, due to its relevant Al content. Immersion tests in phosphate buffered saline (PBS) solution was performed following the ASTM standards and the corrosion behaviour was evaluated at fixed time points by means of electrochemical techniques. Cytotoxic effects were assessed by culturing human neuroblastoma cells with conditioned medium derived from immersion tests at different dilution degree. An increase in the resistance corrosion with the time was observed. In all the investigated cases the presence of Al in the conditioned media did not induce significant toxic effects directly correlated to its content. A decrease of cell viability was only observed in the case of 50 % dilution of PBS conditioned for the longest immersion period (i.e., 28 days).