Search

Protein-particle conjugates and mixtures have been investigated extensively for their diverse applications in biotechnology. However, general methods to measure protein concentration of protein-particle solutions are lacking. Typically, proteins in turbid solutions require separation or staining with another chromophore to quantitate their concentration. Here we demonstrate a label-free, direct approach to measure protein concentrations in turbid solutions using a UV-vis integrating cavity absorbance spectrometer. Three systems are used to test the ability to measure accurate protein concentrations: proteins adsorbed to Alhydrogel, proteins in solution with gold nanoparticles, and proteins encapsulated within polymeric microspheres. Protein concentrations in each of the three protein-particle systems were successfully quantified using a calibration curve created from the absorbance at 280 nm.

Antibodies are molecules that exhibit diverse conformational changes on different timescales, and there is ongoing interest to better understand the relationship between antibody conformational dynamics and storage stability. Physical stability data for an IgG4 monoclonal antibody (mAb-D) were gathered through traditional forced degradation (temperature and stirring stresses) and accelerated stability studies, in the presence of different additives and solution conditions, as measured by differential scanning calorimetry, size exclusion chromatography, and microflow imaging. The results were correlated with hydrogen exchange mass spectrometry (HX-MS) data gathered for mAb-D in the same formulations. Certain parameters of the HX-MS data, including hydrogen exchange in specific peptide segments in the C H 2 domain, were found to correlate with stabilization and destabilization of additives on mAb-D during thermal stress. No such correlations between mAb physical stability and HX-MS readouts were observed under agitation stress. These results demonstrate that HX-MS can be set up as a streamlined methodology (using minimal material and focusing on key peptide segments at key time points) to screen excipients for their ability to physically stabilize mAbs. However, useful correlations between HX-MS and either accelerated or real-time stability studies will be dependent on a particular mAb's degradation pathway(s) and the type of stresses used., (Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Lumazine synthase (LS) is an oligomeric enzyme involved in the biosynthesis of riboflavin in microorganisms, fungi, and plants. LS has become of significant interest to biomedical science because of its critical biological role and attractive structural properties for antigen presentation in vaccines. LS derived from Bacillus anthracis (BaLS) consists of 60 identical subunits forming an icosahedron. Its crystal structure has been solved, but its dynamic conformational properties have not yet been studied. We investigated the conformation of BaLS in response to different stress conditions (e.g., chemical denaturants, pH, and temperature) using a variety of biophysical techniques. The physical basis for these thermal transitions was studied, indicating that a molten globular state was present during chemical unfolding by guanidine HCl. In addition, BaLS showed 2 distinct thermal transitions in phosphate-containing buffers. The first transition was due to the dissociation of phosphate ions from BaLS and the second one came from the dissociation and conformational alteration of its icosahedral structure. A small conformational alteration was induced by the binding/dissociation of phosphate ions to BaLS. This work provides a closer view of the conformational behavior of BaLS and provides important information for the formulation of vaccines which use this protein., (Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Nontyphoidal Salmonella enterica serotypes (NTS) are the leading cause of hospitalization and death due to foodborne illnesses. NTS are the costliest of the foodborne pathogens and cause ∼$4 billion annually in health care costs. In Africa, new invasive NTS are the leading cause of bacteremia, especially in HIV-positive children and adults. Current vaccines against S. enterica are not broadly protective and most are directed at the typhoid-causing serotypes, not the NTS. All S. enterica strains require two type III secretion systems (T3SS) for virulence. The T3SS needle tip protein and the first translocator are localized to the T3SS needle tip and are required for pathogenesis of S. enterica Collectively they are 95 to 98% conserved at the amino acid sequence level among all S. enterica strains. The Salmonella pathogenicity island 1 or 2 tip and first translocator proteins were genetically fused to produce the S1 and S2 fusion proteins, respectively, as potential vaccine candidates. S1 and S2 were then characterized using spectroscopic techniques to understand their structural and biophysical properties. Formulated at the proper pH, S1, S2, or S1 plus S2 (S1S2), admixed with adjuvant, was used to immunize mice followed by a lethal challenge with S. enterica serotype Typhimurium or S. enterica serotype Enteritidis. The S1S2 formulation provided the highest protective efficacy, thus demonstrating that an S1S2 subunit vaccine can provide broad, serotype-independent protection, possibly against all S. enterica serotypes. Such a finding would be transformative in improving human health., (Copyright © 2018 American Society for Microbiology.)

An automated method using biotinylated GroEL-streptavidin biosensors with biolayer interferometry (GroEL-BLI) was evaluated to detect the formation of transiently formed, preaggregate species in various pharmaceutically relevant monoclonal antibody (mAb) samples. The relative aggregation propensity of various IgG1 and IgG4 mAbs was rank ordered using the GroEL-BLI biosensor method, and the least stable IgG4 mAb was subjected to different stresses including elevated temperatures, acidic pH, and addition of guanidine HCl. The GroEL-BLI biosensor detects mAb preaggregate formation mostly before, or sometimes concomitantly with, observing soluble aggregates and subvisible particles using size-exclusion chromatography and microflow imaging, respectively. A relatively unstable bispecific antibody (Bis-3) was shown to bind the GroEL biosensor even at low temperatures (25 ° C). During thermal stress (50°C, 1 h), increased Bis-3 binding to GroEL-biosensors was observed prior to aggregation by size-exclusion chromatography or microflow imaging. Transmission electron microscopy analysis of Bis-3 preaggregate GroEL complexes revealed, in some cases, potential hydrophobic interaction sites between the Fc domain of the Bis-3 and GroEL protein. The automated BLI method not only enables detection of transiently formed preaggregate species that initiate protein aggregation pathways but also permits rapid mAb formulation stability assessments at low volumes and low protein concentrations., (Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

We previously produced a heavy-chain-only antibody (Ab) VH domain (V H H)-displayed phage library from two alpacas that had been immunized with ricin toxoid and nontoxic mixtures of the enzymatic ricin toxin A subunit (RTA) and binding ricin toxin B subunit (RTB) (D. J. Vance, J. M. Tremblay, N. J. Mantis, and C. B. Shoemaker, J Biol Chem 288:36538-36547, 2013, https://doi.org/10.1074/jbc.M113.519207). Initial and subsequent screens of that library by direct enzyme-linked immunosorbent assay (ELISA) yielded more than two dozen unique RTA- and RTB-specific V H Hs, including 10 whose structures were subsequently solved in complex with RTA. To generate a more complete antigenic map of ricin toxin and to define the epitopes associated with toxin-neutralizing activity, we subjected the V H H-displayed phage library to additional "pannings" on both receptor-bound ricin and antibody-captured ricin. We now report the full-length DNA sequences, binding affinities, and neutralizing activities of 68 unique V H Hs: 31 against RTA, 33 against RTB, and 4 against ricin holotoxin. Epitope positioning was achieved through cross-competition ELISAs performed with a panel of monoclonal antibodies (MAbs) and verified, in some instances, with hydrogen-deuterium exchange mass spectrometry. The 68 V H Hs grouped into more than 20 different competition bins. The RTA-specific V H Hs with strong toxin-neutralizing activities were confined to bins that overlapped two previously identified neutralizing hot spots, termed clusters I and II. The four RTB-specific V H Hs with potent toxin-neutralizing activity grouped within three adjacent bins situated at the RTA-RTB interface near cluster II. These results provide important insights into epitope interrelationships on the surface of ricin and delineate regions of vulnerability that can be exploited for the purpose of vaccine and therapeutic development., (Copyright © 2017 American Society for Microbiology.)

RiVax is a promising recombinant ricin toxin A subunit (RTA) vaccine antigen that has been shown to be safe and immunogenic in humans and effective at protecting rhesus macaques against lethal-dose aerosolized toxin exposure. We previously used a panel of RTA-specific monoclonal antibodies (MAbs) to demonstrate, by competition enzyme-linked immunosorbent assay (ELISA), that RiVax elicits similar serum antibody profiles in humans and macaques. However, the MAb binding sites on RiVax have yet to be defined. In this study, we employed hydrogen exchange-mass spectrometry (HX-MS) to localize the epitopes on RiVax recognized by nine toxin-neutralizing MAbs and one nonneutralizing MAb. Based on strong protection from hydrogen exchange, the nine MAbs grouped into four spatially distinct epitope clusters (namely, clusters I to IV). Cluster I MAbs protected RiVax's α-helix B (residues 94 to 107), a protruding immunodominant secondary structure element known to be a target of potent toxin-neutralizing antibodies. Cluster II consisted of two subclusters located on the "back side" (relative to the active site pocket) of RiVax. One subcluster involved α-helix A (residues 14 to 24) and α-helices F-G (residues 184 to 207); the other encompassed β-strand d (residues 62 to 69) and parts of α-helices D-E (154 to 164) and the intervening loop. Cluster III involved α-helices C and G on the front side of RiVax, while cluster IV formed a sash from the front to back of RiVax, spanning strands b, c, and d (residues 35 to 59). Having a high-resolution B cell epitope map of RiVax will enable the development and optimization of competitive serum profiling assays to examine vaccine-induced antibody responses across species., (Copyright © 2017 American Society for Microbiology.)

A novel protein adjuvant double-mutant Escherichia coli heat-labile toxin, LT (R192G/L211A) or dmLT, is in preclinical and early clinical development with various vaccine candidates. Structural characterization and formulation development of dmLT will play a key role in its successful process development, scale-up/transfer, and commercial manufacturing. This work describes extensive analytical characterization of structural integrity and physicochemical stability profile of dmLT from a lyophilized clinical formulation. Reconstituted dmLT contained a heterogeneous mixture of intact holotoxin (AB 5 , ∼75%) and free B 5 subunit (∼25%) as assessed by analytical ultracentrifugation and hydrophobic interaction chromatography. Intact mass spectrometry (MS) analysis revealed presence of Lys 84 glycation near the native sugar-binding site in dmLT, and forced degradation studies using liquid chromatography-MS peptide mapping demonstrated specific Asn deamidation and Met oxidation sites. Using multiple biophysical measurements, dmLT was found most stable between pH 6.5 and 7.5 and at temperatures ≤50°C. In addition, soluble aggregates and particle formation were observed upon shaking stress. By identifying the physicochemical degradation pathways of dmLT using newly developed stability-indicating analytical methods from this study, we aim at developing more stable candidate formulations of dmLT that will minimize the formation of degradants and improve storage stability, as both a frozen bulk substance and eventually as a liquid final dosage form., (Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.)

High protein concentration formulations are required for low-volume administration of therapeutic antibodies targeted for subcutaneous, self-administration by patients. Ultra-high concentrations (≥150 mg/mL) can lead to dramatically increased solution viscosities, which in turn can lead to stability, manufacturing, and delivery challenges. In this study, various categories and individual types of pharmaceutical excipients and other additives (56 in total) were screened for their viscosity reducing effects on 2 different mAbs. The physicochemical stability profile, as well as viscosity ranges, of several candidate antibody formulations, identified and designed based on the results of the excipient screening, were evaluated over a 6-month time period under accelerated and real-time storage conditions. In addition to reducing the solution viscosities to acceptable levels for parenteral administration (using currently available and acceptable delivery devices), the candidate formulations did not result in notable losses of physicochemical stability of the 2 antibodies on storage for 6 months at 25°C. The experiments described here demonstrate the feasibility of a formulation development and selection approach to identify candidate high-concentration antibody formulations with viscosities within pharmaceutically acceptable ranges that do not adversely affect their physicochemical storage stability., (Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

There is growing interest in generating physicochemical and biological analytical data sets to compare complex mixture drugs, for example, products from different manufacturers. In this work, we compare various crofelemer samples prepared from a single lot by filtration with varying molecular weight cutoffs combined with incubation for different times at different temperatures. The 2 preceding articles describe experimental data sets generated from analytical characterization of fractionated and degraded crofelemer samples. In this work, we use data mining techniques such as principal component analysis and mutual information scores to help visualize the data and determine discriminatory regions within these large data sets. The mutual information score identifies chemical signatures that differentiate crofelemer samples. These signatures, in many cases, would likely be missed by traditional data analysis tools. We also found that supervised learning classifiers robustly discriminate samples with around 99% classification accuracy, indicating that mathematical models of these physicochemical data sets are capable of identifying even subtle differences in crofelemer samples. Data mining and machine learning techniques can thus identify fingerprint-type attributes of complex mixture drugs that may be used for comparative characterization of products., (Copyright © 2017 American Pharmacists Association®. All rights reserved.)

Crofelemer is a botanical polymeric proanthocyanidin that inhibits chloride channel activity and is used clinically for treating HIV-associated secretory diarrhea. Crofelemer lots may exhibit significant physicochemical variation due to the natural source of the raw material. A variety of physical, chemical, and biological assays were used to identify potential critical quality attributes (CQAs) of crofelemer, which may be useful in characterizing differently sourced and processed drug products. Crofelemer drug substance was extracted from tablets of one commercial drug product lot, fractionated, and subjected to accelerated thermal degradation studies to produce derivative lots with variations in chemical and physical composition potentially representative of manufacturing and raw material variation. Liquid chromatography, UV absorbance spectroscopy, mass spectrometry, and nuclear magnetic resonance analysis revealed substantial changes in the composition of derivative lots. A chloride channel inhibition cell-based bioassay suggested that substantial changes in crofelemer composition did not necessarily result in major changes to bioactivity. In 2 companion papers, machine learning and data mining approaches were applied to the analytical and biological data sets presented herein, along with chemical stability data sets derived from forced degradation studies, to develop an integrated mathematical model that can identify CQAs which are most relevant in distinguishing between different populations of crofelemer., (Copyright © 2017 American Pharmacists Association®. All rights reserved.)

As the second of a 3-part series of articles in this issue concerning the development of a mathematical model for comparative characterization of complex mixture drugs using crofelemer (CF) as a model compound, this work focuses on the evaluation of the chemical stability profile of CF. CF is a biopolymer containing a mixture of proanthocyanidin oligomers which are primarily composed of gallocatechin with a small contribution from catechin. CF extracted from drug product was subjected to molecular weight-based fractionation and thiolysis. Temperature stress and metal-catalyzed oxidation were selected for accelerated and forced degradation studies. Stressed CF samples were size fractionated, thiolyzed, and analyzed with a combination of negative-ion electrospray ionization mass spectrometry (ESI-MS) and reversed-phase-HPLC with UV absorption and fluorescence detection. We further analyzed the chemical stability data sets for various CF samples generated from reversed-phase-HPLC-UV and ESI-MS using data-mining and machine learning approaches. In particular, calculations based on mutual information of over 800,000 data points in the ESI-MS analytical data set revealed specific CF cleavage and degradation products that were differentially generated under specific storage/degradation conditions, which were not initially identified using traditional analysis of the ESI-MS results., (Copyright © 2017 American Pharmacists Association®. All rights reserved.)

In this report we investigated, within a group of closely related single domain camelid antibodies (V H Hs), the relationship between binding affinity and neutralizing activity as it pertains to ricin, a fast-acting toxin and biothreat agent. The V1C7-like V H Hs (V1C7, V2B9, V2E8, and V5C1) are similar in amino acid sequence, but differ in their binding affinities and toxin-neutralizing activities. Using the X-ray crystal structure of V1C7 in complex with ricin's enzymatic subunit (RTA) as a template, Rosetta-based homology modeling coupled with energetic decomposition led us to predict that a single pairwise interaction between Arg29 on V5C1 and Glu67 on RTA was responsible for the difference in ricin toxin binding affinity between V1C7, a weak neutralizer, and V5C1, a moderate neutralizer. This prediction was borne out experimentally: substitution of Arg for Gly at position 29 enhanced V1C7's binding affinity for ricin, whereas the reverse (ie, Gly for Arg at position 29) diminished V5C1's binding affinity by >10 fold. As expected, the V5C1 R29G mutant was largely devoid of toxin-neutralizing activity (TNA). However, the TNA of the V1C7 G29R mutant was not correspondingly improved, indicating that in the V1C7 family binding affinity alone does not account for differences in antibody function. V1C7 and V5C1, as well as their respective point mutants, recognized indistinguishable epitopes on RTA, at least at the level of sensitivity afforded by hydrogen-deuterium mass spectrometry. The results of this study have implications for engineering therapeutic antibodies because they demonstrate that even subtle differences in epitope specificity can account for important differences in antibody function., (© 2017 Wiley Periodicals, Inc.)

This work describes the formulation design and development of a novel protein based adjuvant, a double mutant of heat labile toxin (dmLT), based on knowledge of the protein's structural integrity and physicochemical degradation pathways. Various classes of pharmaceutical excipients were screened for their stabilizing effect on dmLT during exposure to thermal and agitation stresses as monitored by high throughput analytical assays for dmLT degradation. Sucrose, phosphate, sodium chloride, methionine and polysorbate-80 were identified as potential stabilizers that protected dmLT against either conformational destabilization, aggregation/particle formation or chemical degradation (e.g., Met oxidation and Lys glycation). Different combinations and concentrations of the selected stabilizers were then evaluated to further optimize dmLT stability while maintaining pharmaceutically acceptable ranges of solution pH and osmolality. The effect of multiple freeze-thaw (FT) cycles on the physical stability of candidate bulk formulations was also examined. Increasing the polysorbate-80 concentration to 0.1% in the lead candidate bulk formulation mitigated the loss of protein mass during FT. This formulation development study enabled the design of a new bulk formulation of the dmLT adjuvant and provides flexibility for future use in combination with a variety of different vaccine dosage forms with different antigens., (Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Polyvalent antigen display is an effective strategy to enhance the immunogenicity of subunit vaccines by clustering them in an array-like manner on a scaffold system. This strategy results in a higher local density of antigens, increased high avidity interactions with B cells and other antigen presenting cells, and therefore a more effective presentation of vaccine antigens. In this study, we used lumazine synthase (LS), an icosahedral symmetry capsid derived from Bacillus anthracis, as a scaffold to present 60 copies of a linear B cell epitope (PB10) from the ricin toxin fused to the C terminus of LS via four different linkers. We then investigated the effects of linker length, linker rigidity and formaldehyde crosslinking on the protein assembly, conformational integrity, thermal stability, in vitro antibody binding, and immunogenicity in mice. Fusion of the PB10 peptide onto LS, with varying linker lengths, did not affect protein assembly, thermal stability or exposure of the epitope, but had a minor impact on protein conformation. Formaldehyde crosslinking considerably improved protein thermal stability with only minor impact on protein conformation. All LS_PB10 constructs, when administered to mice by injection without adjuvant, elicited measurable anti-ricin serum IgG titers, although the titers were not sufficient to confer protection against a 10× lethal dose ricin challenge. This work sheds light on the biophysical properties, immunogenicity and potential feasibility of LS from B. anthracis as a scaffold system for polyvalent antigen display., (© 2017 The Protein Society.)

A barrier to the use of hydrogen exchange-mass spectrometry (HX-MS) in many contexts, especially analytical characterization of various protein therapeutic candidates, is that differences in temperature, pH, ionic strength, buffering agent, or other additives can alter chemical exchange rates, making HX data gathered under differing solution conditions difficult to compare. Here, we present data demonstrating that HX chemical exchange rates can be substantially altered not only by the well-established variables of temperature and pH but also by additives including arginine, guanidine, methionine, and thiocyanate. To compensate for these additive effects, we have developed an empirical method to correct the hydrogen-exchange data for these differences. First, differences in chemical exchange rates are measured by use of an unstructured reporter peptide, YPI. An empirical chemical exchange correction factor, determined by use of the HX data from the reporter peptide, is then applied to the HX measurements obtained from a protein of interest under different solution conditions. We demonstrate that the correction is experimentally sound through simulation and in a proof-of-concept experiment using unstructured peptides under slow-exchange conditions (pD 4.5 at ambient temperature). To illustrate its utility, we applied the correction to HX-MS excipient screening data collected for a pharmaceutically relevant IgG4 mAb being characterized to determine the effects of different formulations on backbone dynamics.

Multidose formulations of biotherapeutics, which offer better dosage management and reduced production costs, require the addition of antimicrobial preservatives (APs). APs have been shown, however, to decrease protein stability in solution and cause protein aggregation. In this report, the effect of 4 APs, m-cresol, phenol, phenoxyethanol, and benzyl alcohol on conformational stability, aggregation propensity, and backbone flexibility of an IgG1 mAb, mAb-4, is investigated. Compared with no preservative control, each of the APs decreased the conformational stability of mAb-4 as measured by differential scanning calorimetry and extrinsic fluorescence spectroscopy. The addition of APs resulted in increased monomer loss and aggregate accumulation at 50°C over 28 days, as monitored by size-exclusion chromatography. The extent of conformational destabilization and protein aggregation of mAb-4 induced by APs followed their calculated octanol-water partition coefficients. Increases in backbone flexibility, as measured by hydrogen exchange, of a region located in the C H 2 domain of the mAb (heavy chain 237-254) in the presence of APs also correlated with hydrophobicity. Based on these results, the destabilizing effect of APs on mAb-4 correlates with the increased hydrophobicity of the APs and their ability to enhance the local backbone flexibility of an aggregation hot spot within the C H 2 domain of the mAb., (Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

This study describes the physicochemical characterization, stabilization, and formulation design of SM4-AC, an acrylodan-labeled glucose/galactose-binding protein for use in a continuous glucose monitoring device. The physical stability profile of SM4-AC as a function of pH and temperature was monitored using a combination of biophysical techniques and the resulting physical stability profile was visualized using an empirical phase diagram. Forced degradation chemical stability studies (Asn deamidation, Met oxidation) of SM4-AC were performed using a combination of capillary isoelectric focusing, peptide mapping, and reversed-phase HPLC. Differential scanning fluorimetry was then employed to screen various pharmaceutical excipients for their ability to physically stabilize SM4-AC. An optimized formulation of 20% sucrose and 2.5 mM calcium chloride in 10 mM MES buffer, 150 mM NaCl at pH 6.0 increased the conformational stability of SM4-AC by 15°C. Accelerated and real-time stability studies were setup to compare the SM4-AC protein's physicochemical stability and glucose-binding activity in 2 formulations for up to 12 months. SM4-AC in an optimized formulation (vs the original formulation) showed improved physical stability, and similar chemical stability and glucose binding activity profiles during storage up to 52 weeks at various temperatures., (Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Fibroblast growth factor-1 (FGF-1), a potent human mitogen and insulin sensitizer, signals through both tyrosine kinase receptor-mediated autocrine/paracrine pathways as well as a nuclear intracrine pathway. Phosphorylation of FGF-1 at serine 116 (S116) has been proposed to regulate intracrine signaling. Position S116 is located within a ∼17 amino acid C-terminal loop that contains a rich set of functional determinants including heparin∖heparan sulfate affinity, thiol reactivity, nuclear localization, pharmacokinetics, functional half-life, nuclear ligand affinity, stability, and structural dynamics. Mutational targeting of specific functionality in this region without perturbing other functional determinants is a design challenge. S116R is a non-phosphorylatable variant present in bovine FGF-1 and other members of the human FGF family. We show that the S116R mutation in human FGF-1 is accommodated with no perturbation of biophysical or structural properties, and is therefore an attractive mutation with which to elucidate the functional role of phosphorylation. Characterization of S116R shows reduction in NIH 3T3 fibroblast mitogenic stimulation, increase in fibroblast growth factor receptor-1c activation, and prolonged duration of glucose lowering in ob/ob hyperglycemic mice. A novel FGF-1/fibroblast growth factor receptor-1c dimerization interaction combined with non-phosphorylatable intracrine signaling is hypothesized to be responsible for these observed functional effects., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Concentration-dependent reversible self-association (RSA) of monoclonal antibodies (mAbs) poses a challenge to their pharmaceutical development as viable candidates for subcutaneous delivery. While the role of the antigen-binding fragment (Fab) in initiating RSA is well-established, little evidence supports the involvement of the crystallizable fragment (Fc). In this report, a variety of biophysical tools, including hydrogen exchange mass spectrometry, are used to elucidate the protein interface of such non-covalent protein-protein interactions. Using dynamic and static light scattering combined with viscosity measurements, we find that an IgG1 mAb (mAb-J) undergoes RSA primarily through electrostatic interactions and forms a monomer-dimer-tetramer equilibrium. We provide the first direct experimental mapping of the interface formed between the Fab and Fc domains of an antibody at high protein concentrations. Charge distribution heterogeneity between the positively charged interface spanning complementarity-determining regions CDR3H and CDR2L in the Fab and a negatively charged region in C H 3/Fc domain mediates the RSA of mAb-J. When arginine and NaCl are added, they disrupt RSA of mAb-J and decrease the solution viscosity. Fab-Fc domain interactions between mAb monomers may promote the formation of large transient antibody complexes that ultimately cause increases in solution viscosity. Our findings illustrate how limited specific arrangements of amino-acid residues can cause mAbs to undergo RSA at high protein concentrations and how conserved regions in the Fc portion of the antibody can also play an important role in initiating weak and transient protein-protein interactions.

Liquid chromatographic methods, combined with mass spectrometry, offer exciting and important opportunities to better characterize complex vaccine antigens including recombinant proteins, virus-like particles, inactivated viruses, polysaccharides, and protein-polysaccharide conjugates. The current abilities and limitations of these physicochemical methods to complement traditional in vitro and in vivo vaccine potency assays are explored in this review through the use of illustrative case studies. Various applications of these state-of-the art techniques are illustrated that include the analysis of influenza vaccines (inactivated whole virus and recombinant hemagglutinin), virus-like particle vaccines (human papillomavirus and hepatitis B), and polysaccharide linked to protein carrier vaccines (pneumococcal). Examples of utilizing these analytical methods to characterize vaccine antigens in the presence of adjuvants, which are often included to boost immune responses as part of the final vaccine dosage form, are also presented. Some of the challenges of using chromatographic and LC-MS as physicochemical assays to routinely test complex vaccine antigens are also discussed., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Adequate protein solubility is an important prerequisite for development, manufacture, and administration of biotherapeutic drug candidates, especially for high-concentration protein formulations. A previously established method for determining the relative apparent solubility (thermodynamic activity) of proteins using polyethylene glycol (PEG) precipitation is adapted for screening and comparing monoclonal antibody (mAb) candidates where only limited quantities (≤1 mg) are available. This micro-PEG assay is used to evaluate various broadly neutralizing mAb candidates to HIV-1 viral spike (gp120 and gp41 glycoproteins). Using ∼1 mg of VRC01-WT mAb per assay, the precision of the micro-PEG assay was established. A series of 7 different broadly neutralizing mAbs to the HIV-1 viral spike proteins were compared by curve shape (%PEG vs. protein concentration), %PEGmidpoint determinations, and extrapolated apparent solubility values. Numerous formulation conditions were then evaluated for their relative effects on the VRC01-WT mAb. The PEGmidpt and apparent solubility values of VRC01-WT mAb decreased as the solution pH increased and increased as NaCl and arginine were added. A final optimization of the micro-PEG assay established that amounts as low as 0.1-0.2 mg can be used. Thus, the micro-PEG assay has significant potential as a relative solubility screening tool during candidate selection and early formulation development., (Copyright © 2016 American Pharmacists Association®. All rights reserved.)

Non-native protein aggregation is a key degradation pathway of immunoglobulins. In this work, the aggregation kinetics of an immunoglobulin gamma-1 monoclonal antibody (IgG1 mAb) in different solution environments was monitored over a range of incubation temperatures for up to seven months using size exclusion chromatography. Histidine and citrate buffers with/without sodium chloride were employed to modulate the mAb's conformational stability, solubility (in the presence of polyethylene glycol, PEG), and protein-protein interactions as measured by differential scanning calorimetry, PEG precipitation, and static light scattering, respectively. The effect of these parameters on the mechanism(s) of mAb aggregation during storage at different temperatures was determined using kinetic models, which were used to fit aggregation data to determine rate constants for aggregate nucleation and growth processes. This approach was used to investigate the effects of colloidal protein-protein interactions and solubility values (in PEG solutions) on the mechanisms and rates of IgG1 mAb aggregation as a function of temperature-induced structural perturbations. Aggregate nucleation and growth pathways for this IgG1 mAb were sensitive to temperature and overall conformational stability. Aggregate growth, on the other hand, was also sensitive to conditions affecting the solubility of the mAb, particularly at elevated temperatures.

Chaotropes like urea and guanidinium chloride (GdmCl) tend to destabilize, and kosmotropes like proline tend to stabilize folded structures of peptides and proteins. Here, we combine fluorescence anisotropy decay measurements and molecular dynamics simulations to gain a microscopic understanding of the molecular mechanism for shifting conformational preferences in aqueous, GdmCl, urea, and proline solutions of a simple model dipeptide, N-acetyl-tryptophan-amide (NATA). Measured anisotropy decay of NATA as a function of temperature, pH, and cosolvent concentrations showed reorientations moderately slower in GdmCl and urea and substantially slower in proline compared to those of aqueous environment. A small change in pH significantly slows orientation time in water and GdmCl and less markedly in urea. Computationally, we use molecular dynamics with dihedral restraints to separately analyze the motions and interactions of the representative NATA conformers in the four different solvent environments. This novel analysis provides a dissection of the observed overall diffusion rates into contributions from individual dipeptide conformations. The variation of rotational diffusion rates with conformation are quite large. Population-weighted averaging or using properties of the major cluster reproduces the dynamical features of the full unrestrained dynamics. Additionally, we correlate the observable diffusion rates with microscopic features of conformer size, shape, and solvation. This analysis uncovered underlying differences in detailed atomistic behavior of the three cosolvents-urea, GdmCl, and proline. For both urea and the pure water system we find good agreement with hydrodynamic theory, with diffusion rates primarily correlated with conformer size and shape. In contrast, for GdmCl and proline solutions, the variation in conformer diffusion rates was mostly determined by specific interactions with the cosolvents. We also find preferences for different molecular shapes by the three cosolvents, with increased preferential solvation of smaller and more spherical conformers by urea and larger and more elongated conformers by GdmCl and proline. Additionally, our results provide a basis for a simple approximate model of the effects of pH lowering on dipeptide conformational equilibria. The translational diffusion rates of NATA are less sensitive to conformations, but variation with solvation strength is similar to rotational diffusion. Our results, combining experiment and simulation, show that we can identify the individual peptide conformers with definite microscopic properties of shape, size, and solvation, that are responsible for producing physical observables, such as translational and orientational diffusion in the complex solvent environments of denaturants and osmolytes.

The time-resolved parallel artificial membrane permeability assay with fluorescence detection and comprehensive computer simulations are used to study the passive permeation of three aromatic dipeptides-N-acetyl-phenylalanineamide (NAFA), N-acetyltyrosineamide (NAYA), and N-acetyl-tryptophanamide (NATA) through a 1,2-dioleoyl-sn-glycero-3-phospocholine (DOPC) lipid bilayer. Measured permeation times and permeability coefficients show fastest translocation for NAFA, slowest for NAYA, and intermediate for NATA under physiological temperature and pH. Computationally, we perform umbrella sampling simulations to model the structure, dynamics, and interactions of the peptides as a function of z, the distance from lipid bilayer. The calculated profiles of the potential of mean force show two strong effects-preferential binding of each of the three peptides to the lipid interface and large free energy barriers in the membrane center. We use several approaches to calculate the position-dependent translational diffusion coefficients D(z), including one based on numerical solution the Smoluchowski equation. Surprisingly, computed D(z) values change very little with reaction coordinate and are also quite similar for the three peptides studied. In contrast, calculated values of sidechain rotational correlation times τrot(z) show extremely large changes with peptide membrane insertion-values become 100 times larger in the headgroup region and 10 times larger at interface and in membrane center, relative to solution. The peptides' conformational freedom becomes systematically more restricted as they enter the membrane, sampling α and β and C7eq basins in solution, α and C7eq at the interface, and C7eq only in the center. Residual waters of solvation remain around the peptides even in the membrane center. Overall, our study provides an improved microscopic understanding of passive peptide permeation through membranes, especially on the sensitivity of rotational diffusion to position relative to the bilayer.

Gram-negative pathogens often use conserved type three secretion systems (T3SS) for virulence. The Shigella type three secretion apparatus (T3SA) penetrates the host cell membrane and provides a unidirectional conduit for injection of effectors into host cells. The protein Spa47 localizes to the base of the apparatus and is speculated to be an ATPase that provides the energy for T3SA formation and secretion. Here, we developed an expression and purification protocol, producing active Spa47 and providing the first direct evidence that Spa47 is a bona fide ATPase. Additionally, size exclusion chromatography and analytical ultracentrifugation identified multiple oligomeric species of Spa47 with the largest greater than 8 fold more active for ATP hydrolysis than the monomer. An ATPase inactive Spa47 point mutant was then engineered by targeting a conserved Lysine within the predicted Walker A motif of Spa47. Interestingly, the mutant maintained a similar oligomerization pattern as active Spa47, but was unable to restore invasion phenotype when used to complement a spa47 null S. flexneri strain. Together, these results identify Spa47 as a Shigella T3SS ATPase and suggest that its activity is linked to oligomerization, perhaps as a regulatory mechanism as seen in some related pathogens. Additionally, Spa47 catalyzed ATP hydrolysis appears to be essential for host cell invasion, providing a strong platform for additional studies dissecting its role in virulence and providing an attractive target for anti-infective agents., (© 2016 The Protein Society.)

RiVax is a candidate ricin toxin subunit vaccine antigen that has proven to be safe in human phase I clinical trials. In this study, we introduced double and triple cavity-filling point mutations into the RiVax antigen with the expectation that stability-enhancing modifications would have a beneficial effect on overall immunogenicity of the recombinant proteins. We demonstrate that 2 RiVax triple mutant derivatives, RB (V81L/C171L/V204I) and RC (V81I/C171L/V204I), when adsorbed to aluminum salts adjuvant and tested in a mouse prime-boost-boost regimen were 5- to 10-fold more effective than RiVax at eliciting toxin-neutralizing serum IgG antibody titers. Increased toxin neutralizing antibody values and seroconversion rates were evident at different antigen dosages and within 7 days after the first booster. Quantitative stability/flexibility relationships analysis revealed that the RB and RC mutations affect rigidification of regions spanning residues 98-103, which constitutes a known immunodominant neutralizing B-cell epitope. A more detailed understanding of the immunogenic nature of RB and RC may provide insight into the fundamental relationship between local protein stability and antibody reactivity., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Human fibroblast growth factor-1 (FGF-1) has broad therapeutic potential in regenerative medicine but has undesirable biophysical properties of low thermostability and 3 buried cysteine (Cys) residues (at positions 16, 83, and 117) that interact to promote irreversible protein unfolding under oxidizing conditions. Mutational substitution of such Cys residues eliminates reactive buried thiols but cannot be accomplished simultaneously at all 3 positions without also introducing further substantial instability. The mutational introduction of a novel Cys residue (Ala66Cys) that forms a stabilizing disulfide bond (i.e., cystine) with one of the extant Cys residues (Cys83) effectively eliminates one Cys while increasing overall stability. This increase in stability offsets the associated instability of remaining Cys substitution mutations and permits production of a Cys-free form of FGF-1 (Cys16Ser/Ala66Cys/Cys117Ala) with only minor overall instability. The addition of a further stabilizing mutation (Pro134Ala) creates a Cys-free FGF-1 mutant with essentially wild-type biophysical properties. The elimination of buried free thiols in FGF-1 can substantially increase the protein half-life in cell culture. Here, we show that the effective cell survival/mitogenic functional activity of a fully Cys-free form is also substantially increased and is equivalent to wild-type FGF-1 formulated in the presence of heparin sulfate as a stabilizing agent. The results identify this Cys-free FGF-1 mutant as an advantageous "second generation" form of FGF-1 for therapeutic application., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Fluorescence anisotropy decay measurements and all atom molecular dynamics simulations are used to characterize the orientational motion and preferential interaction of a peptide, N-acetyl-tryptophan-amide (NATA) containing two peptide bonds, in aqueous, urea, guanidinium chloride (GdmCl), and proline solution. Anisotropy decay measurements as a function of temperature and concentration showed moderate slowing of reorientations in urea and GdmCl and very strong slowing in proline solution, relative to water. These effects deviate significantly from simple proportionality of peptide tumbling time to solvent viscosity, leading to the investigation of microscopic preferential interaction behavior through molecular dynamics simulations. Examination of the interactions of denaturants and osmolyte with the peptide backbone uncovers the presence of strongest interaction with urea, intermediate with proline, and weakest with GdmCl. In contrast, the strongest preferential solvation of the peptide side chain is by the nonpolar part of the proline zwitterion, followed by urea, and GdmCl. Interestingly, the local density of urea around the side chain is higher, but the GdmCl distribution is more organized. Thus, the computed preferential solvation of the side chain by the denaturants and osmolyte can account for the trend in reorientation rates. Analysis of water structure and its dynamics uncovered underlying differences between urea, GdmCl, and proline. Urea exerted the smallest perturbation of water behavior. GdmCl had a larger effect on water, slowing kinetics and stabilizing interactions. Proline had the largest overall interactions, exhibiting a strong stabilizing effect on both water-water and water-peptide hydrogen bonds. The results for this elementary peptide system demonstrate significant differences in microscopic behavior of the examined solvent environments. For the commonly used denaturants, urea tends to form disorganized local aggregates around the peptide groups and has little influence on water, while GdmCl only forms specific interactions with the side chain and tends to destabilize water structure. The protective osmolyte proline has the strongest and most specific interactions with the tryptophan side chain, and also stabilizes both water-water and water-peptide hydrogen bonds. Our results strongly suggest protein or peptide denaturation triggered by urea occurs by direct interaction, whereas GdmCl interacts favorably with side chains and destabilizes peptide-water hydrogen bonds. The stabilization of biopolymers by an osmolyte such as proline is governed by favorable preferential interaction with the side chains and stabilization of water.

For therapeutic protein analytical studies related to evaluating lot-to-lot variability, different processes and/or formulations, or biosimilars, there is growing interest in applying novel data visualization tools for fingerprint analysis to identify statistically significant differences between 2 samples. Comparative Signature Diagrams (CSDs) were previously developed to display such differences as colored contour plots using a variety of biophysical data sets. In this study, several improvements are proposed to enhance readability and quantitative determinations of CSDs using protein stability data from more commonly used analytical methods such as size exclusion chromatography and capillary isoelectric focusing. To demonstrate the effectiveness of improved CSDs for data visualization, an accelerated and real-time stability study was set up for an IgG1 mAb (mAb A) and its corresponding triple mutant (mAb E). The stability profiles of both mAbs were compared for differences in aggregation (size exclusion chromatography) and charge heterogeneity (capillary isoelectric focusing) profiles over time. Both traditional data analysis and the improved CSDs conclude that the triple mutant mAb E is more susceptible to physicochemical degradation than mAb A under accelerated conditions. The current abilities and limitations of CSDs to provide fingerprint analysis of protein stability profiles to facilitate the determination of similarity versus nonsimilarity between samples is discussed., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

As part of a series of articles in this special issue describing 4 well-defined IgG1-Fc glycoforms as a model system for biosimilarity analysis (high mannose-Fc, Man5-Fc, GlcNAc-Fc and N297Q-Fc aglycosylated), the focus of this work is comparisons of their physical properties. A trend of decreasing apparent solubility (thermodynamic activity) by polyethylene glycol precipitation (pH 4.5, 6.0) and lower conformational stability by differential scanning calorimetry (pH 4.5) was observed with reducing size of the N297-linked oligosaccharide structures. Using multiple high-throughput biophysical techniques, the physical stability of the Fc glycoproteins was then measured in 2 formulations (NaCl and sucrose) across a wide range of temperatures (10°C-90°C) and pH (4.0-7.5) conditions. The data sets were used to construct 3-index empirical phase diagrams and radar charts to visualize the regions of protein structural stability. Each glycoform showed improved stability in the sucrose (vs. salt) formulation. The HM-Fc and Man5-Fc displayed the highest relative stability, followed by GlcNAc-Fc, with N297Q-Fc being the least stable. Thus, the overall physical stability profiles of the 4 IgG1-Fc glycoforms also show a correlation with oligosaccharide structure. These data sets are used to develop a mathematical model for biosimilarity analysis (as described in a companion article by Kim et al. in this issue)., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Biosimilarity assessments are performed to decide whether 2 preparations of complex biomolecules can be considered "highly similar." In this work, a machine learning approach is demonstrated as a mathematical tool for such assessments using a variety of analytical data sets. As proof-of-principle, physical stability data sets from 8 samples, 4 well-defined immunoglobulin G1-Fragment crystallizable glycoforms in 2 different formulations, were examined (see More et al., companion article in this issue). The data sets included triplicate measurements from 3 analytical methods across different pH and temperature conditions (2066 data features). Established machine learning techniques were used to determine whether the data sets contain sufficient discriminative power in this application. The support vector machine classifier identified the 8 distinct samples with high accuracy. For these data sets, there exists a minimum threshold in terms of information quality and volume to grant enough discriminative power. Generally, data from multiple analytical techniques, multiple pH conditions, and at least 200 representative features were required to achieve the highest discriminative accuracy. In addition to classification accuracy tests, various methods such as sample space visualization, similarity analysis based on Euclidean distance, and feature ranking by mutual information scores are demonstrated to display their effectiveness as modeling tools for biosimilarity assessments., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Four different well-defined IgG1 Fc glycoforms are proposed as a model system to examine important biological and physicochemical features for protein drug biosimilar analyses. The IgG1 Fc glycoforms were produced by yeast expression combined with in vitro enzymatic synthesis as a series of sequentially truncated high-mannose IgG1 Fc glycoforms with an anticipated range of biological activity and structural stability. Initial characterization with mass spectrometry, SDS-PAGE, size exclusion HPLC, and capillary isoelectric focusing confirmed that the glycoproteins are overall highly similar with the only major difference being glycosylation state. Binding to the activating Fc receptor, FcγRIIIa was used to evaluate the potential biological activity of the IgG1 Fc glycoproteins. Two complementary methods using biolayer interferometry, 1 with protein G-immobilized IgG1 Fc and the other with streptavidin-immobilized FcγRIIIa, were developed to assess FcγRIIIa affinity in kinetic binding studies. The high-mannose IgG1 Fc and Man5-IgG1 Fc glycoforms were highly similar to one another with high affinity for FcγRIIIa, whereas GlcNAc-Fc had weak affinity, and the nonglycosylated N297Q-Fc had no measurable affinity for FcγRIIIa. These 4 IgG1 Fc glycoforms were also evaluated in terms of physical and chemical stability profiles and then used as a model system to mathematically assess overall biosimilarity, as described in a series of companion articles., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

Shear thinning behavior, often observed in shear viscosity tests of IgG therapeutic molecules, could lead to significant disparities in the projections for the viscosity profile of a molecule. Despite its importance, molecular determinants of sheer thinning in protein suspensions are largely unknown. To better understand the factors influencing sheer thinning, viscosity profiles of IgG1 and IgG2 molecules were monitored over a wide range of bulk concentrations (0.007-70 mg/mL). The degree of shear-thinning of 70 and 0.007 mg/mL samples was minimal in comparison to the 0.7 mg/mL solution for both IgG molecules. These observations suggest that bulk concentration alone does not determine the degree of sheer thinning, and additional factors play a role. Additional data reveals, within a threshold range of concentrations, that a strong correlation exists between the degree of shear thinning and the surface area to volume (SA:V) ratio of an IgG sample exposed to the interface. The influence of the interface, however, diminishes when the bulk concentration falls outside this concentration window. Also revealed by interfacial oscillatory rheological testing, both IgG molecules showed solid-like behavior (G'i) at the air-water interface at 0.7 mg/mL, whereas liquid-like behavior (G″i) was dominant at 0.007 and 70 mg/mL concentrations. These observations imply that the lack of solid-like behavior was due to the absence of a network structure. Likewise the addition of polysorbate 20 (PS20) to the 0.7 mg/mL solutions decreased the degree of shear thinning by disrupting the network structure at the interface. Taken together, the results presented here suggest that, although shear thinning behavior is a manifestation of an interfacial, rather than a bulk, phenomenon, the extent of it depends on how susceptible the surface molecules are to the air-water interface, where the surface molecular structures are influenced by the bulk properties.

A critical element of vaccine formulation studies is the identification of chemical and physical degradation pathways that compromise structural integrity, and which may in turn affect the clinical safety and efficacy, of macromolecular antigens. Formulation development helps optimize and maintain the long-term storage stability and viability of vaccine antigens in pharmaceutically relevant dosage forms. The protocols presented in this manuscript highlight the use of accelerated stability studies for the formulation of influenza vaccine candidates including virus-like particles (VLP) and particle forming hemagglutinin (HA) antigens. Three case studies, each targeting a different facet of preclinical vaccine formulation development, are reviewed: (1) excipient screening experiments to mitigate VLP physical degradation, (2) methods for monitoring a specific chemical perturbation of the recombinant HA antigen and elucidating its effect on in vitro potency, and (3) maintaining HA conformational stability in the presence of freeze-thaw and freeze-drying stresses.

In this chapter we demonstrate a method to produce virus-like particles (VLPs) from Escherichia coli. Standard bacterial protocols are used for the cloning, transformation, and expression of the protein subunits. A two-step protein purification method is highlighted: one step based on separating soluble proteins with ion-exchange affinity chromatography and a second polishing step using size-exclusion columns to isolate VLP species. The ensuing VLPs can be characterized with a variety of biophysical techniques including ultraviolet (UV)-visible spectroscopy for protein quantification, dynamic light scattering for size distribution determination, and transmission electron microscopy to ascertain size and morphology.

Diarrhea caused by Shigella, Salmonella, and Yersinia is an important public health problem, but development of safe and effective vaccines against such diseases is challenging. A new antigen delivery platform called bacterium-like particles (BLPs) was explored as a means for delivering protective antigens from the type III secretion systems (T3SS) of these pathogens. BLPs are peptidoglycan skeletons derived from Lactococcus lactis that are safe for newborns and can carry multiple antigens. Hydrophobic T3SS translocator proteins were fused to a peptidoglycan anchor (PA) for BLP attachment. The proteins and protein-BLP complexes associated with BLPs were characterized and the resulting data used to create three-index empirical phase diagrams (EPDs). On the basis of these EPDs, IpaB (Shigella) and SipB (Salmonella) behave distinctly from YopB (Yersinia) under different environmental stresses. Adding the PA domain appears to enhance the stability of both the PA and translocator proteins, which was confirmed using differential scanning calorimetry, and although the particles dominated the spectroscopic signals in the protein-loaded BLPs, structural changes in the proteins were still detected. The protein-BLPs were most stable near neutral pH, but these proteins' hydrophobicity made them sensitive to environmental stresses., (© 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.)

An IgG2 monoclonal antibody (mAb) solution was subjected to stirring, generating high concentrations of nanometer and subvisible particles, which were then successfully size-enriched into different size bins by low-speed centrifugation or a combination of gravitational sedimentation and fluorescence-activated cell sorting (FACS). The size-fractionated mAb particles were assessed for their ability to elicit the release of cytokines from a population of donor-derived human peripheral blood mononuclear cells (PBMC) at two phases of the immune response. Fractions enriched in nanometer-sized particles showed a lower response than those enriched in micron-sized particles in this assay. Particles of 5-10 μm in size displayed elevated cytokine release profiles compared with other size ranges. Stir-stressed mAb particles had amorphous morphology, contained protein with partially altered secondary structure, elevated surface hydrophobicity (compared with controls), and trace levels of elemental fluorine. FACS size-enriched the mAb particle samples, yet did not notably alter the overall morphology or composition of particles as measured by microflow imaging, transmission electron microscopy, and scanning electron microscopy-energy dispersive X-ray spectroscopy. The utility and limitations of FACS for size separation of mAb particles and potential of in vitro PBMC studies to rank-order the immunogenic potential of various types of mAb particles are discussed., (© 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.)

Upon exposure to shaking stress, an IgG1 mAb formulation in both the liquid and lyophilized state formed subvisible particles. Because freeze-drying was expected to minimize protein physical instability under these conditions, the extent and nature of aggregate formation in the lyophilized preparation were examined using a variety of particle characterization techniques. The effects of formulation variables such as residual moisture content, reconstitution rate, and reconstitution medium were also examined. Upon reconstitution of shake-stressed lyophilized mAb, differences in protein particle size and number were observed by microflow digital imaging, with the reconstitution medium having the largest impact. Shake stress had minor effects on the structure of protein within the particles as shown by SDS-PAGE and FTIR analysis. The lyophilized mAb was shake stressed to different extents and stored for 3 months at different temperatures. Both extent of cake collapse and storage temperature affected the physical stability of the shake-stressed lyophilized mAb upon subsequent storage. These findings demonstrate that physical degradation upon shaking of a lyophilized IgG1 mAb formulation includes not only cake breakage, but also results in an increase in subvisible particles and turbidity upon reconstitution. The shake-induced cake breakage of the lyophilized IgG1 mAb formulation also resulted in decreased physical stability upon storage., (© 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.)

Although formation of subvisible particles (1-100 μm) during manufacturing and/or storage is a major stability concern with protein therapeutics, particle numbers are often too low to permit for direct experimental measurement of their protein content (mass). The objective of this work was to develop a novel, accurate, and easy-to-implement method to calculate the mass of subvisible protein particles using particle number, size, and morphology data obtained from microflow imaging (MFI) measurements. The method was evaluated using (1) spherical and nonspherical polystyrene standards and (2) shake and stir-stressed IgG1 mAb solutions. For extensively stressed mAb samples, in which protein mass loss after particle removal could be measured experimentally, calculated results were in good agreement and showed improvements in accuracy and precision compared with other methods. Improved estimates of protein mass in particles were made possible by using morphological data to better model particle volume, and by using literature-based values for protein density and particle composition. This method improves estimations of protein particle mass when total amounts are too low to be measured experimentally and also facilitates a better understanding of protein particle formation by accounting for particle mass as well as number., (© 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.)

Bacterium-like particles (BLPs), derived from Lactococcus lactis, offer a self-adjuvanting delivery vehicle for subunit protein vaccines. Proteins can be specifically loaded onto the BLPs via a peptidoglycan anchoring (PA) domain. In this study, the tip proteins IpaD, SipD, and LcrV belonging to type III secretion systems of Shigella flexneri, Salmonella enterica, and Yersinia enterocolitica, respectively, were fused to the PA and loaded onto the BLPs. Herein, we biophysically characterized these nine samples and condensed the spectroscopic results into three-index empirical phase diagrams (EPDs). The EPDs show distinctions between the IpaD/SipD and LcrV subfamilies of tip proteins, based on their physical stability, even upon addition of the PA. Upon attachment to the BLPs, the BLPs become defining moiety in the spectroscopic measurements, leaving the tip proteins to have a subtle yet modulating effect on the structural integrity of the tip proteins-BLPs binding. In summary, this work provides a comprehensive view of physical stability of the tip proteins and tip protein-BLPs and serves as a baseline for screening of excipients to increase the stability of the tip protein-BLPs for future vaccine formulation., (© 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.)

The structural integrity and conformational stability of a genetically modified live, oncolytic herpes simplex virus (o-HSV) were investigated across a wide pH (5.5-8.0) and temperature (10°C-87.5°C) range. A combination of circular dichroism, intrinsic and extrinsic fluorescence, and static light scattering results was visualized using an empirical phase diagram approach to provide a global assessment of physical stability. Distinct phases were identified including the native state of the virus, an intermediate phase that could represent gradual swelling and/or shedding of the viral envelope, and a highly disrupted, aggregated phase. The nature of these altered forms of the virus was further evaluated by transmission electron microscopy and viral plaque assays. The effect of freeze-thaw (F/T) stress on o-HSV was also examined. After one F/T cycle, a loss of infectious virus titers was observed. In addition, the monomeric virus particle concentration decreased during F/T stress, whereas there was a concurrent increase in larger particles (2-10 μm). The comprehensive biophysical characterization of viral stability conducted in this study identified major degradation events leading to loss of infectivity of o-HSV and represents an important step toward stabilization of the virus against thermal and F/T stresses., (© 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.)

The dynamic nature of the structure of monoclonal antibodies (mAbs) can be probed at a resolution of 5-20 residues using hydrogen-deuterium exchange mass spectrometry (H/D-MS). Recent studies using H/D-MS have shown that distinct regions of IgG1 mAbs experience significant changes in backbone dynamics in response to specific physicochemical alterations, varying solution conditions, or exposure to different environmental stresses. Tracking such changes in local dynamics may therefore serve as a key analytical tool, not only to monitor stability changes, but also to design improved, and more stable formulations of therapeutic mAbs in pharmaceutical dosage forms. This review article describes the H/D-MS method as applied to the analysis of formulations containing mAbs and summarizes recent studies monitoring changes in mAb local dynamics in response to chemical modifications, physical degradation, and presence of stabilizing and destabilizing excipients. Furthermore, the nature of the local dynamics of a highly conserved peptide segment in the CH 2 domain of IgG1 mAbs is reviewed, and the results are correlated with decreased pharmaceutical stability, supporting the identification of a common aggregation hotspot sequence in the Fc region of human IgG1 mAbs. In addition, unresolved challenges (and opportunities) in applying H/D-MS technology for stabilization and formulation development of mAbs are discussed., (© 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.)

During transport and storage, vaccines may be exposed to temperatures outside of the range recommended for storage, potentially causing efficacy losses. To better understand and prevent such losses, dominant negative inhibitor (DNI), a recombinant protein antigen for a candidate vaccine against anthrax, was formulated as a liquid and as a glassy lyophilized powder with the adjuvants aluminum hydroxide and glycopyranoside lipid A (GLA). Freeze-thawing of the liquid vaccine caused the adjuvants to aggregate and decreased its immunogenicity in mice. Immunogenicity of liquid vaccines also decreased when stored at 40°C for 8 weeks, as measured by decreases in neutralizing antibody titers in vaccinated mice. Concomitant with efficacy losses at elevated temperatures, changes in DNI structure were detected by fluorescence spectroscopy and increased deamidation was observed by capillary isoelectric focusing (cIEF) after only 1 week of storage of the liquid formulation at 40°C. In contrast, upon lyophilization, no additional deamidation after 4 weeks at 40°C and no detectable changes in DNI structure or reduction in immunogenicity after 16 weeks at 40°C were observed. Vaccines containing aluminum hydroxide and GLA elicited higher immune responses than vaccines adjuvanted with only aluminum hydroxide, with more mice responding to a single dose., (© 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.)

The halophile environment has a number of compelling aspects with regard to the origin of structured polypeptides (i.e., proteogenesis) and, instead of a curious niche that living systems adapted into, the halophile environment is emerging as a candidate "cradle" for proteogenesis. In this viewpoint, a subsequent halophile-to-mesophile transition was a key step in early evolution. Several lines of evidence indicate that aromatic amino acids were a late addition to the codon table and not part of the original "prebiotic" set comprising the earliest polypeptides. We test the hypothesis that the availability of aromatic amino acids could facilitate a halophile-to-mesophile transition by hydrophobic core-packing enhancement. The effects of aromatic amino acid substitutions were evaluated in the core of a "primitive" designed protein enriched for the 10 prebiotic amino acids (A,D,E,G,I,L,P,S,T,V)-having an exclusively prebiotic core and requiring halophilic conditions for folding. The results indicate that a single aromatic amino acid substitution is capable of eliminating the requirement of halophile conditions for folding of a "primitive" polypeptide. Thus, the availability of aromatic amino acids could have facilitated a critical halophile-to-mesophile protein folding adaptation-identifying a selective advantage for the incorporation of aromatic amino acids into the codon table., (© 2014 The Protein Society.)

This study compares the local conformational dynamics and physical stability of an IgG1 mAb (mAb-A) with its corresponding YTE (M255Y/S257T/T259E) mutant (mAb-E), which was engineered for extended half-life in vivo. Structural dynamics was measured using hydrogen/deuterium (H/D) exchange mass spectrometry while protein stability was measured with differential scanning calorimetry (DSC) and size exclusion chromatography (SEC). The YTE mutation induced differences in H/D exchange kinetics at both pH 6.0 and 7.4. Segments covering the YTE mutation sites and the FcRn binding epitopes showed either subtle or no observable differences in local flexibility. Surprisingly, several adjacent segments in the CH2 and distant segments in the VH, CH1, and VL domains had significantly increased flexibility in the YTE mutant. Most notable among the observed differences is increased flexibility of the 244-254 segment of the CH2 domain, where increased flexibility has been shown previously to correlate with decreased conformational stability and increased aggregation propensity in other IgG1 mAbs (e.g., presence of destabilizing additives as well as upon de-glycosylation or methionine oxidation). DSC analysis showed decreases in both thermal onset (Tonset) and unfolding (Tm1) temperatures of 7°C and 6.7°C, respectively, for the CH2 domain of the YTE mutant. In addition, mAb-E aggregated faster than mAb-A under accelerated stability conditions as measured by SEC analysis. Hence, the relatively lower physical stability of the YTE mutant correlates with increased local flexibility of the 244-254 segment, providing a site-directed mutant example that this segment of the CH2 domain is an aggregation hot spot in IgG1 mAbs.

Shigella spp. are causative agents of bacillary dysentery, a human illness with high global morbidity levels, particularly among elderly and infant populations. Shigella infects via the fecal-oral route, and its virulence is dependent upon a type III secretion system (T3SS). Two components of the exposed needle tip complex of the Shigella T3SS, invasion plasmid antigen D (IpaD) and IpaB, have been identified as broadly protective antigens in the mouse lethal pneumonia model. A recombinant fusion protein (DB fusion) was created by joining the coding sequences of IpaD and IpaB. The DB fusion is coexpressed with IpaB's cognate chaperone, IpgC, for proper recombinant expression. The chaperone can then be removed by using the mild detergents octyl oligooxyethelene (OPOE) or N,N-dimethyldodecylamine N-oxide (LDAO). The DB fusion in OPOE or LDAO was used for biophysical characterization and subsequent construction of an empirical phase diagram (EPD). The EPD showed that the DB fusion in OPOE is most stable at neutral pH below 55 °C. In contrast, the DB fusion in LDAO exhibited remarkable thermal plasticity, since this detergent prevents the loss of secondary and tertiary structures after thermal unfolding at 90 °C, as well as preventing thermally induced aggregation. Moreover, the DB fusion in LDAO induced higher interleukin-17 secretion and provided a higher protective efficacy in a mouse challenge model than did the DB fusion in OPOE. These data indicate that LDAO might introduce plasticity to the protein, promoting thermal resilience and enhanced protective efficacy, which may be important in its use as a subunit vaccine., (Copyright © 2015, American Society for Microbiology. All Rights Reserved.)