Search

The Casson viscous gas fluid flow with mass transpiration and radiation is demonstrated in this paper. A similarity transformation is utilized to interpret the representing construction of nonlinear PDEs by nonlinear ODEs. Then, using an exact analysis of the momentum equation, we constructed the dual solutions to the flow problem. This solution domain aids in the solution of the energy equation under the incomplete gamma function condition. The effect of radiation can also be seen in the heat equation. Physical parameters of interest, such as Brinkman number, porous media, thermal radiation number, induced slip, suction/injection and shear stress, are examined and graphically depicted. The gas slip velocity is used to simulate the slip flow model of the overall mass transfer on the moving sheet. Models of first- and second-order slip are introduced to induce the total mass transfer on the moving sheet. Additionally, the suction that causes the slip velocity rather than surface movement is investigated. The neighboring gases are forced to flow in the opposite direction of sheet movement by the mass suction-induced slip. As a result, the slip-induced suction and sheet movement cause the solution space to increase. The closed-form exact solutions are achieved for both the stretching and shrinking sheet cases. For stretched sheet instances, there is never a uniform solution. However, depending on the values of the Casson and wall mass transfer parameters, the solution in the case of the shrinking sheet may or may not exist, and if it does, it may or may not be unique or may have a dual nature. The research also demonstrates that stronger mass suction is required for a consistent flow of Casson fluid. The impacts of inverse Darcy number, induced slip parameter, Casson fluid and suction/injection on the flow and heat transfer properties of the fluid are examined under the influence of radiation, and the solution of each profile is shown in the form of figures along with the outcomes of the interface velocity and heat transfer rate at the surface. [ABSTRACT FROM AUTHOR]

This research article, explores the influence of an inclined magnetic field on the fluid flow over a permeable stretching/shrinking surface with heat transfer. The study use water as a conventional base fluid, with graphene oxide (GO) and Aluminum oxide (Al2O3) nanoparticles submerged to create a nanofluid, the system of governing nonlinear partial differential equations converted into ordinary differential equations via suitable similarity conversions. This allow for the unique solution for stretching sheet/shrinking sheets to be obtained, along with the corresponding temperature solution in terms of the hypergeometric function, several parameters are included in the investigation and their contribution is graphically explained to examine physical characteristics such as radiation, inclined magnetic field, solution domain, volume fraction parameter, and temperature jump. Increasing the volume fraction and thermal radiation increases the thermal boundary layer, increasing the magnetic field parameter and inverse Darcy number increases the temperature and decays the velocity profile. The present work has many useful applications in engineering, biological and physical sciences, as well as in cleaning engine lubricants and thrust-bearing technologies. [ABSTRACT FROM AUTHOR]

The present paper investigates analytically a continuous stream of viscoelastic fluid and magnetohydrodynamic flow of second‐grade fluids owing to protracted sheets in a permeable medium with the help of the Cattaneo–Christov pattern. This idea is a new generalization of the classical Fourier law. Also, in this analysis, heat as well as mass transfer in second‐grade fluid past wall suction/injection is assumed. A few similarity transformations are used to simplify the addressing of boundary layer expressions. An analytical solution is obtained by applying the Appell hypergeometric properties. Furthermore, our work also describes an effect of the relaxation time variable, elasticity number, and Prandtl number together with temperature fields. Also, we studied the newly introduced parameter, that is, the thermal radiation parameter by Cattaneo, over a Fourier heat flux pattern. In addition, some physical presentation of the measurements is illustrated in the graphs. [ABSTRACT FROM AUTHOR]

In this paper, the three-dimensional Casson flow of a ternary hybrid nanofluid over a porous linearly stretching/shrinking surface in the presence of an external magnetic field is considered. The surface deformation process is described by introducing two parameters of stretching/shrinking in the lateral directions. Using similarity transformations, the basic set of nonlinear partial differential equations is converted into ordinary differential equations. An exact analytical solution to this boundary value problem is obtained. The influence of the Casson parameter, magnetic field, porosity medium, and stretching/shrinking parameter, taking into account mass transpiration, on the velocity profiles and the skin friction coefficients is considered in detail. It has been established that the results obtained in some limited cases are in excellent agreement with the available data. Tables show the new results for the skin friction coefficients in the lateral directions (x and y) for different variants of surface deformation. [ABSTRACT FROM AUTHOR]

The impacts of radiation, mass transpiration, and volume fraction of carbon nanotubes on the flow of a Newtonian fluid past a porous stretching/shrinking sheet are investigated. For this purpose, three types of base liquids are considered, namely, water, ethylene glycol and engine oil. Moreover, single and multi-wall carbon nanotubes are examined in the analysis. The overall physical problem is modeled using a system of highly nonlinear partial differential equations, which are then converted into highly nonlinear third order ordinary differential equations via a suitable similarity transformation. These equations are solved analytically along with the corresponding boundary conditions. It is found that the carbon nanotubes can significantly improve the heat transfer process. Their potential application in cutting-edge areas is also discussed to a certain extent. [ABSTRACT FROM AUTHOR]

The unsteady stagnation-point flow of a hybrid nanofluid over a stretching/shrinking sheet embedded in a porous medium with mass transpiration and chemical reactions is considered. The momentum and mass transfer problems are combined to form a system of partial differential equations, which is converted into a set of ordinary differential equations via similarity transformation. These ordinary differential equations are solved analytically to obtain the solution for velocity and concentration profiles in exponential and hypergeometric forms, respectively. The concentration profile is obtained for four different cases namely constant wall concentration, uniform mass flux, general power law wall concentration and general power law mass flux. The effect of different physical parameters such as Darcy number ðDa-1Þ, mass transpiration parameter VC ð Þ, stretching/shrinking parameter ðdÞ, chemical reaction parameter ð-Þ and Schmidt number ðScÞ on velocity and concentration profile is examined. Results show that, the axial velocity will decreases as the shrinking sheet parameter increases, regardless of whether the suction or injection case is examined. The concentration decreases with an increase in the shrinking sheet parameter and the chemical reaction rate parameter. [ABSTRACT FROM AUTHOR]

This work purpose suggest a new analytical technique called the fractional homotopy analysis transform method (FHATM) for solving time fractional Bloch NMR (nuclear magnetic resonance) flow equations, which are a set of macroscopic equations that are used for modeling nuclear magnetization as a function of time. The true beauty of this article is the coupling of the homotopy analysis method and the Laplace transform method for systems of fractional differential equations. The solutions obtained by the proposed method indicate that the approach is easy to implement and computationally very attractive. [ABSTRACT FROM AUTHOR]

This research article, explores the influence of an inclined magnetic field on the fluid flow over a permeable stretching/shrinking surface with heat transfer. The study use water as a conventional base fluid, with graphene oxide (GO) and Aluminum oxide (Al 2 O 3 ) nanoparticles submerged to create a nanofluid, the system of governing nonlinear partial differential equations converted into ordinary differential equations via suitable similarity conversions. This allow for the unique solution for stretching sheet/shrinking sheets to be obtained, along with the corresponding temperature solution in terms of the hypergeometric function, several parameters are included in the investigation and their contribution is graphically explained to examine physical characteristics such as radiation, inclined magnetic field, solution domain, volume fraction parameter, and temperature jump. Increasing the volume fraction and thermal radiation increases the thermal boundary layer, increasing the magnetic field parameter and inverse Darcy number increases the temperature and decays the velocity profile. The present work has many useful applications in engineering, biological and physical sciences, as well as in cleaning engine lubricants and thrust-bearing technologies., (© 2023 IOP Publishing Ltd.)