Search

Ceria-supported copper catalysts (Ce1−xCuxO2, with x (mol) = 0, 0.01, 0.03, 0.05 and 0.10) were prepared in one step through the polymeric precursor method. The textural properties of the catalysts were investigated by X-ray diffraction (XRD), Rietveld refinement, N2-physisorption (BET surface area), electron paramagnetic resonance (EPR), UV–visible diffuse reflectance and photoluminescence spectroscopies and temperature-programmed reduction (TPR). In a previous study ceria-supported copper catalysts were found to be efficient in the preferential oxidation of CO. In this study, we extended the catalytic application of Ce1−xCuxO2 systems to n-hexane oxidation and it was verified that the catalysts were highly efficient in the proposed reaction. The best performance (up to 95% conversion) was observed for the catalysts with low copper loads (Ce0.97Cu0.03O2 and Ce0.99Cu0.01O2, respectively). The physicochemical characterizations revealed that these behaviors could be attributed to the copper species present in the catalysts and the interaction between CuO and CeO2, which vary according to the copper content.

This paper describes the synthesis of Ni/MgAl2O4 catalysts using a method developed by our group with the objective of obtaining a material with more homogeneous composition, more porous structure and greater surface area compared with other spinel preparation methods. The performance of the material obtained was evaluated in the catalytic decomposition of methane, which is a potential alternative route for obtaining pure hydrogen and valuable carbonaceous materials. The textural properties of the catalyst were investigated by X-ray diffraction (XRD), N2 adsorption/desorption isotherms (BET and BJH methods), and temperature-programmed reduction (TPR) analysis. The nature of the carbon deposits was investigated by thermogravimetric analysis (TGA), Raman spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The influence of the operating conditions on the characteristics of the carbon deposited was studied. The results demonstrated the efficiency of the catalyst in this reaction with the formation of CNTs, irrespective of the operating conditions employed. In general, multiple-walled nanotubes (MWCNTs) were preferentially obtained, and when a diluted flow of CH4 was used the CNTs presented a greater degree of graphitization.

A novel and simple method to prepare nickel-based catalysts for ethanol steam reforming is proposed. The present method was developed using castor oil as a precursor. The results clarify that the nickel–carbon (Ni/C) catalyst has a high activity for ethanol steam reforming. It was observed that the catalytic behavior could be modified according to the experimental conditions employed. Moreover, it is interesting to note that the increase in the catalytic activity of the Ni/C nanocomposite over time, at 500 and 600 °C of reaction temperature, may be associated with the formation of filamentous carbon. The preliminary results indicate that the novel methodology used, led to the obtainment of materials with important properties that can be extended to applications in different catalytic process.

This paper presents the synthesis of Co-doped Al2O3 catalysts, developed by our group, with porous structures and high surface areas. The catalytic activity of the materials obtained was evaluated in the catalytic decomposition of methane, which is an attractive method for CO/CO2-free production of hydrogen, particularly for fuel cell applications. The catalysts were shown to be active and stable in relation to the catalytic decomposition of methane reaction. It was observed that the catalytic performance is dependent on the catalyst characteristics and on the operational conditions employed. The conversion of methane increased with metal loading, reaction temperature and N2:CH4 molar ratio.

Here we describe a single chemical route to obtain highly dispersed nanometric Ni particles embedded in titania/carbon matrixes (amorphous and crystalline). The synthesis of these nanocomposites is based on a polymeric precursor method. The metallic Ni nanoparticles (1–15 nm) were obtained in a single process. We also present the results of photocatalytic experiments involving a series of nanocrystalline composites based on TiO2/carbon with embedded Ni nanoparticles as nanocatalysts for rhodamine 6G degradation in aqueous solution and investigate the effects of the structure and properties of the nanocomposites on their photocatalytic applications. The effect of the different annealing treatments on the formation of TiO2 nanophases (anatase and/or rutile), the size of Ni particles and the role of the residual carbon phase on the final solid are also described. r 2008 Elsevier Ltd. All rights reserved.

Neste trabalho foi investigada a preparação de carbonos ativados através da pirólise de composições elastoméricas provenientes de resíduos de bandas de rodagem de pneus de automóveis. O material foi processado nas temperaturas de 500, 620 e 700 °C, em atmosfera de N2, utilizando-se o hidróxido de potássio como agente ativador. Os produtos resultantes foram caracterizados pela fisisorção de N2 a 77 K, através de isotermas de Brunauer, Emmet e Teller e por microscopia eletrônica de varredura. Esses carbonos ativados apresentam estruturas típicas de sólidos mesoporosos e a temperatura de pirólise tem grande influência na área específica e distribuição de volume de poros. O carbono ativado obtido a 700 °C apresentou maior área específica e estrutura porosa compacta. Esse material apresenta melhor desempenho frente à adsorção de azul de metileno, removendo até 1,0 x 10-1 g de corante por grama de carbono utilizado, em tempos inferiores a 300 s. In this work, the preparation of activated carbons through the pyrolysis of elastomers, arising from car threads of tire waste, was investigated. The material was processed at 500, 620 and 700 °C, under N2 atmosphere, by using potassium hydroxide as activating agent. The resulting products were characterized by physisorption of N2 at 77 K, through Brunauer, Emmet and Teller isotherms, and scanning electron microscopy. The carbons obtained display a characteristic structure of mesoporous materials and the pyrolysis temperature has strong influence on the specific area and porous volume distribution. The activated carbon obtained at 700 °C has high specific area and compact structure. It exhibited high performance for adsorption of methylene blue solution, removing 1.1 x 10-1 g of the dye per gram of carbon in less than 300 s.

Aldol condensation between methanol and acetone, catalyzed by undoped and rare earths (Ce and Y) doped tin oxide nanoparticles is presented. Several methanol/acetone molar ratio conditions were evaluated aiming to produce methyl vinyl ketone as the main product. The undoped and doped ultrafine nanoparticles of tin oxide were prepared using the polymeric precursor method. The characterization was carried out by means of N2 adsorption (BET), X-ray diffraction (XRD), CO2 chemisorption, X-ray photoemission spectroscopy (XPS) and transmission electron microscopy (TEM). The catalytic behavior observed for SnO2 samples suggests that the methanol/acetone molar ratio and Ce and Y doping play an important role in the catalytic activity and in the product selectivity. The results from XRD and XPS pointed to the de-mixing process for the doped samples, due to the heat-treatment. This segregation layer contributes to the observed change in the catalytic behavior. Neste trabalho é apresentada a reação de condensação aldólica entre metanol e acetona promovida por nanopartículas de dióxido de estanho, não dopadas e dopadas com as terras raras Ce e Y. Diversas condições de relação molar metanol/acetona foram avaliadas, objetivando a obtenção com elevada seletividade do composto a, b-insaturado, metil vinil cetona. As nanopartículas foram preparadas empregando-se o método dos precursores poliméricos. As amostras foram caracterizadas por meio de adsorção de N2 para determinação de área superficial específica (BET), difração de raios X (DRX), adsorção química de CO2, espectroscopia de fotoelétrons (XPS) e microscopia eletrônica de transmissão (MET). O comportamento catalítico observado para as amostras de SnO2 sugere que a relação molar metanol/acetona e a dopagem com as terras raras desempenham um papel importante na atividade catalítica do material e na seletividade aos produtos reacionais. Os resultados de DRX e XPS apontam para a formação de uma camada de segregação, para as amostras dopadas, devido ao tratamento térmico imposto. Essa camada de segregação afeta diretamente o comportamento catalítico do material frente à reação de condensação.