Search

This paper has designed a novel off-wall insulation liner, aiming to prevent severe frost damages for the high-speed railway tunnel in cold regions. In terms of composition, the double-layer steel corrugated plates of the liner not only prevent the block falling and water intrusion of cold-region tunnels but prolong the durability and effectiveness of thermal insulation materials. Besides, the quick-construction technology for the off-wall insulation liner was derived in the present study, and it exhibits excellent construction efficiency, great economic and social benefits in the high-speed railway tunnel. Concerning the insulation capacity, the double insulation layers (polyurethane foam and air) perform the dramatical coldness-blocking effect, the freezing line moves forward from 0.48m-deep surrounding rock to the lining surface. The four-year field test has proved the effectiveness and insulation capacity of the off-wall tunnel, the severe frost damages in the Wufengshan tunnel were successfully eliminated. Compared with existing coldproof measures, the off-wall insulation liner in this paper exhibits excellent insulation capacity, high construction efficiency, and excellent economic benefits, it could be applied in the high-speed railway tunnels with high-altitude or extremely low temperatures.

Background Human mutations in the X‐linked lysosome‐associated membrane protein‐2 (LAMP2) gene can cause a multisystem Danon disease or a primary cardiomyopathy characterized by massive hypertrophy, conduction system abnormalities, and malignant ventricular arrhythmias. We introduced an in‐frame LAMP2 gene exon 6 deletion mutation (denoted L2Δ6) causing human cardiomyopathy, into mouse LAMP2 gene, to elucidate its consequences on cardiomyocyte biology. This mutation results in in‐frame deletion of 41 amino acids, compatible with presence of some defective LAMP2 protein. Methods and Results Left ventricular tissues from L2Δ6 and wild‐type mice had equivalent amounts of LAMP2 RNA, but a significantly lower level of LAMP2 protein. By 20 weeks of age male mutant mice developed left ventricular hypertrophy which was followed by left ventricular dilatation and reduced systolic function. Cardiac electrophysiology and isolated cardiomyocyte studies demonstrated ventricular arrhythmia, conduction disturbances, abnormal calcium transients and increased sensitivity to catecholamines. Myocardial fibrosis was strikingly increased in 40‐week‐old L2Δ6 mice, recapitulating findings of human LAMP2 cardiomyopathy. Immunofluorescence and transmission electron microscopy identified mislocalization of lysosomes and accumulation of autophagosomes between sarcomeres, causing profound morphological changes disrupting the cellular ultrastructure. Transcription profile and protein expression analyses of L2Δ6 hearts showed significantly increased expression of genes encoding activators and protein components of autophagy, hypertrophy, and apoptosis. Conclusions We suggest that impaired autophagy results in cardiac hypertrophy and profound transcriptional reactions that impacted metabolism, calcium homeostasis, and cell survival. These responses define the molecular pathways that underlie the pathology and aberrant electrophysiology in cardiomyopathy of Danon disease.

Fiber reinforced polymer (FRP) has been proved to be effective to improve the structural strength and ductility for column structures. An experimental study was conducted to investigate the compressive performance of FRP confined glued-laminated timber (GLT) and cross-laminated timber (CLT) columns. A total of 60 column specimens of two dimensions in height using different FRP types, FRP thickness, and laminate types were tested under cyclic axial compression loads. This study focuses on the compressive capacity and ductility of the new FRP composited timber structure. For this purpose, a loading protocol was designed, including a force-dependent pre-load and an amplitude-increasing displacement-dependent cyclic compression load. The results showed that the ultimate compression load of specimens was considerably promoted by the FRP sheets. Wrapping FRP sheets led to an average improvement of 29% and 24% for the FRP confined CLT and GLT specimens, respectively, compared to the initial stiffness of unreinforced specimens. Using the FRP sheets, the energy dissipation capacity of CLT and GLT specimens was increased by 358% and 266%, respectively. In general, GLT specimens had a higher energy dissipation rate compared to the CLT specimens, while CLT specimens showed a better potential for sustained energy consumption if confined with sufficient FRP sheets.

This paper investigated the stress distribution of an adhesive layer for GFRP–steel bonded joints under 22.48 kN tensile loading using a three-dimensional numerical simulation. Firstly, a stress analysis of three paths was conducted, and after comparison, path II (through the middle layer of the bonding layer) was adopted as the analyzing path. Furthermore, a systemically parametric study of the effects of the FRP stiffness (i.e., elastic modulus and thickness), bonding length, adhesive thickness, and adhesive modulus was conducted. For the joints with different FRP elastic moduli, the minimum value of normal peeling stress was calculated as −3.80 MPa by the FRP for 10 GPa, showing a significantly severe stress concentration of FRP for 10 GPa. An analysis of the von Mises stresses proved that the increase in FRP stiffness could reduce the stress concentration of the adhesive layer effectively. The study of the effect of bonding lengths indicated that a more uniform peeling stress distribution could result from the longest bonding size; the largest peeling stress of 6.54 MPa was calculated for a bonding length of 30 mm. Further parameter analysis showed that the stress concentration of the adhesive layer could be influenced by the FRP thickness, bonding thickness, and elastic modulus of the adhesive layer.

This study aimed to evaluate the pharmacokinetics of acipimox in rats under simulated high altitude hypoxia conditions. A sensitive and reliable LC–MS/MS method has been established for the quantitation of acipimox in rat plasma and tissue homogenate and validated according to the guidelines of the European Medicines Agency (EMA) and the US Food and Drug Administration (FDA). Western blotting and enzyme linked immunosorbent assay (ELISA) were used to investigate the expression of lipid metabolism-related proteins and free fatty acid (FFA) levels, respectively. Cell viability was detected using a Cell Counting kit-8 assay (CCK-8). The method was then successfully applied in a pharmacokinetic comparison between normoxic and hypoxic rats. The results indicated that there were significant differences in the main pharmacokinetics parameters of acipimox between normoxic and hypoxic rats. HCAR2 expression in the hypoxia group was upregulated compared to that in the normoxia group and the levels of FFA decreased more in the hypoxia group. Under the hypoxia condition, the proliferation of HK2 cells was inhibited with increasing concentrations of acipimox. The results provide important and valuable information for the safety and efficacy of acipimox, which indicated that the dosage of acipimox might be adjusted appropriately during clinical medication in hypoxia.

Abstract Blastocyst complementation by pluripotent stem cell (PSC) injection is believed to be the most promising method to generate xenogeneic organs. However, ethical issues prevent the study of human chimeras in the late embryonic stage of development. Primate embryonic stem cells (ESCs), which have similar pluripotency to human ESCs, are a good model for studying interspecies chimerism and organ generation. However, whether primate ESCs can be used in xenogenous grafts remains unclear. In this study, we evaluated the chimeric ability of cynomolgus monkey (Macaca fascicularis) ESCs (cmESCs) in pigs, which are excellent hosts because of their many similarities to humans. We report an optimized culture medium that enhanced the anti-apoptotic ability of cmESCs and improved the development of chimeric embryos, in which domesticated cmESCs (D-ESCs) injected into pig blastocysts differentiated into cells of all three germ layers. In addition, we obtained two neonatal interspecies chimeras, in which we observed tissue-specific D-ESC differentiation. Taken together, the results demonstrate the capability of D-ESCs to integrate and differentiate into functional cells in a porcine model, with a chimeric ratio of 0.001–0.0001 in different neonate tissues. We believe this work will facilitate future developments in xenogeneic organogenesis, bringing us one step closer to producing tissue-specific functional cells and organs in a large animal model through interspecies blastocyst complementation.

Abstract Tetraparvovirus, formerly known as Partetravirus, is a newly discovered genus in the family Parvoviridae that is considered phylogenetically distinct from other parvoviruses. However, nothing is known about the prevalence of Tetraparvovirus in special livestock living on the Qinghai-Tibet Plateau of China, such as Tibetan pigs and Tibetan sheep. A pair of special primers was designed based on the conserved regions in the genome of ungulate tetraparvovirus 2 (P-PARV4) and ungulate tetraparvovirus 4 (O-PARV4) and was used to detect P-PARV4 in domestic pigs and Tibetan pigs and O-PARV4 in ovines and Tibetan sheep. The results showed a 15.59 and 9.38% prevalence of P-PARV4 in domestic pigs (18.96% in Gansu Province and 11.76% in Qinghai Province) and Tibetan pigs (14.28% in Gansu Province and 4.44% in Qinghai Province), respectively, and a 7.31 and 5.20% prevalence of O-PARV4 in ovines (6.61% in Gansu Province and 8.00% in Qinghai Province) and Tibetan sheep (4.55% in Gansu Province and 5.50% in Qinghai Province), respectively. The prevalence of P-PARV4 was 14.76% (31/210) for ≤1-month-old pigs and 10.58% (20/189) for > 1-month-old pigs, and the positive rates of O-PARV4 were 7.65% (18/235) for ≤1-month-old sheep and 5.05% (11/218) for > 1-month-old sheep. The phylogenetic analysis of NS1, VP1, VP2 and the whole PARV4-related provirus genome demonstrated that both P-PARV4 and O-PARV4 sequences in this study were more closely related to the sequences of other strains discovered in the same genus of animals. The identity analyses for the full-length VP2 genomes of O-PARV4 revealed 98.84–100.00% sequence identity among the 7 strains and the previously reported strain, which was 98.60–99.28% for P-PARV4. In the present study, for the first time, we have provided comprehensive information regarding the widespread infection of P-PARV4 and O-PARV4 in special livestock on the Qinghai-Tibet Plateau in China. Our present findings highlight the importance of epidemiologic surveillance to limit the spread of Tetraparvovirus in livestock at high altitudes in China.

Objective An experiment was conducted to determine the effect of reduced energy density of close-up diets on metabolites, lipolysis and gluconeogenesis in cows during the transition period. Methods Thirty-nine Holstein dry cows were blocked and assigned randomly to three groups, fed a high energy density diet (HD, 1.62 Mcal of net energy for lactation [NEL]/kg dry matter [DM]), a medium energy density diet (MD, 1.47 Mcal NEL/kg DM), or a low energy density diet (LD, 1.30 Mcal NEL/kg DM) prepartum; they were fed the same lactation diet to 28 days in milk (DIM). All the cows were housed in a free-stall barn and fed ad libitum. Results The reduced energy density diets decreased the blood insulin concentration and increased nonesterified fatty acids (NEFA) concentration in the prepartum period (p0.05). The dietary energy density had no effect on mRNA abundance of insulin receptors, leptin and peroxisome proliferator-activated receptor-γ in adipose tissue, and phosphoenolpyruvate carboxykinase, carnitine palmitoyltransferase-1 and peroxisome proliferator-activated receptor-α in liver during the transition period (p>0.05). The HD cows had higher mRNA abundance of hormone-sensitive lipase at 3 DIM compared with the MD cows and LD cows (p = 0.001). The mRNA abundance of hepatic pyruvate carboxykinase at 3 DIM tended to be increased by the reduced energy density of the close-up diets (p = 0.08). Conclusion The reduced energy density diet prepartum was effective in controlling adipose tissue mobilization and improving the capacity of hepatic gluconeogenesis postpartum.

Abstract Background Breast cancer is one of the most common malignancy among females from the worldwide cancer incidence statistics. Peroxisome gamma coactivator-1β (PGC-1β) has long been identified to be involved in this type of tumorigenesis. However, the mechanisms of PGC-1β in human breast cancer have not been fully understood and the function requires to be further elucidated. Methods mRNA and protein expression of PGC-1β and FOXA2 in breast cancer tissues and cell lines were determined by qRT-PCR and Western Blotting, respectively. To further visualize the expression and localization of PGC-1β and FOXA2, immunochemistry and immunofluorescence staining methods were employed. The effect of PGC-1β and FOXA2 on cell proliferation and migration were evaluated by CCK8, clone formation, transwell and wound-healing assays, which has been done either with stable PGC-1β knockdown or FOXA2 overexpression in vitro. Xenografts model of nude mice were used to evaluate tumor growth in vivo. In addition, proteins expression of the PI3K-AKT-mTOR signaling pathway involved in the regulation of breast cancer were detected by Western Blotting. Results Our results showed that PGC-1β was upregulated and FOXA2 was downregulated in breast cancer tissues and cell lines. These two proteins can be interacted with each other to form the complex. Also, we found the combination of PGC-1β interference with FOXA2 overexpression significantly inhibited cell proliferation and migration in vitro as well as tumor growth in vivo. We further identified that PGC-1β and FOXA2 strongly correlated with the PI3K-AKT-mTOR signaling pathway, and they exerted their biological functions by activating this pathway. Conclusions We demonstrated that downregulation of PGC-1β combined with overexpression of FOXA2 obviously inhibited the function of breast cancer cells through regulating the PI3K-AKT-mTOR pathway.

As a new type of green low-carbon engineered wood product, cross-laminated timber (CLT) is widely used in various types of wooden buildings in Europe and North America, and the number of high-rise wood construction is also increasing. Based on the introduction of the structural characteristics of the CLT and the development status of the CLT in developed countries, this paper focused on the review of the status of research and development of the CLT in China, with an emphasis on the breakthrough technologies of new bamboo-wood composite CLT developed. Finally, the prospects of the CLT in China were discussed.

Objective: Pancreatic carcinoma (PC), one of the most prevalent and malignant tumors, has a poor prognosis and a high mortality rate. EG-VEGF, a vascular endothelial growth factor from endocrine glands, also termed as PROK1, has a high positive expression rate in PC tissues and is involved in the pathogenesis of various tumors. However, the expression and potential role of EG-VEGF in PC has not been thoroughly explored. The aim of this study was to better clarify the expression and potential role of EG-VEGF in pancreatic carcinoma. Methods: Immunohistochemical staining, western blotting, and RT-qPCR analysis were performed to detect the EG-VEGF level in PC tissues and cells. Subsequently, two short hairpin RNA (shRNA) lentiviral expression vector, shPROK1-1/shPROK1-2, were transfected into PANC-1 and BxPC-3 PC cell lines. MTT assay was used to determine cell proliferation. Meanwhile, flow cytometry assay was conducted to measure cell cycle and cell apoptosis. The protein levels of PI3K/AKT/mTOR pathway-related genes were also determined by western blotting. Results: EG-VEGF was aberrantly expressed in PC samples, as compared with paracancerous samples. Knockdown of PROK1 notably decreased the protein level of EG-VEGF, indicating a successful downregulation model of EG-VEGF. EG-VEGF silencing remarkably attenuated cell proliferation, while also induced G0/G1 arrest and magnified the extent of cell apoptosis. Further, EG-VEGF knockdown significantly inhibited PI3K/AKT/mTOR signaling pathway by downregulating p-PI3K, p-AKT, and p-mTOR levels. Conclusion: This study identified the high-expression of EG-VEGF in pancreatic carcinoma tissues and cells, and demonstrated that EG-VEGF silencing inhibits the proliferation of PC cells and promotes apoptosis via regulating PI3K/AKT/mTOR pathway. Thus, EG-VEGF may become an essential target for the therapy of pancreatic cancer in the future.

The proliferation of plug-in electric vehicles has led to increased public charging infrastructure in cities worldwide. Grid-connected parking lot spaces are the most common charging option due to their technological readiness and convenience of adoption. Since the batteries aggregated by parking lots can be regarded as virtual energy storage, grid-connected parking lots are expected to provide many benefits to the urban distribution grid. This paper proposes a comprehensive methodological framework to evaluate the potential benefits and costs of utilizing grid-connected parking lot infrastructures to promote energy supply sustainability in future power distribution grids. Capacity-value-based and cost-effectiveness indexes are developed, which quantify the potential contribution of parking lots to power supply reliability and the associated economic implications. To realistically describe the available generation capacity of parking lot resources, a comprehensive model is presented, which explicitly considers the impact of external stimuli (incentive rates) on the behavioral patterns of lot users. Vehicle user responsiveness to incentive grades is derived from social field surveys. To conduct the evaluation, a hybrid algorithm based on Monte Carlo simulations is employed. The proposed methodology is illustrated on a real distribution grid in Beijing. The results confirm the effectiveness of our proposed approach and support practical policy suggestions.

Background: To study the specific expression of circular RNA (circRNA) in breast cancer and adjacent normal tissues to identify differentially expressed circRNA in breast cancer patients. To study the correlation between circRNA and clinical data of breast cancer, and to evaluate its potential as a breast cancer biomarker. Methods: The differential expression of circRNAs between the breast cancer tissues and adjacent normal tissues was screened by Human CircRNA Microarray. Candidate circRNAs verified by qRT-PCR. CircRNA was analyzed by Agilent GeneSpring 13.0 software. SPSS23.0, GraphPad Prism, and Sigmaplot software were used for statistical analysis. Perform T test, one-way ANOVA, curve regression analysis and ROC curve analysis for evaluating the diagnostic value of circular RNA. Results: Among the 2021 differentially expressed circRNAs, 546 were up-regulated and 1475 were down-regulated in breast cancer tissues. The validation study demonstrated that six circRNAs were downregulated. Among them, hsa_circ_0104824 proved high correlation between breast cancer tissues and plasma samples in its expression and diagnostic value. Conclusion: Hsa_circ_0104824 may serve as a promising predictive biomarker and therapeutic target for patients with breast cancer.

Although estrogen has crucial functions for endometrium growth, the specific dose and underlying molecular mechanism in intrauterine adhesion (IUA) remain unclear. In this study, we aimed to investigate the effects of estrogen on epithelial-mesenchymal transition (EMT) in normal and fibrotic endometrium, and the role of estrogen and Wnt/β-catenin signaling in the formation of endometrial fibrosis. CCK-8 and immunofluorescence assay were performed to access the proliferation of different concentrations of estrogen on normal human endometrial epithelial cells (hEECs). qRT-PCR and western blot assay were utilized to explore the effect of estrogen on EMT in normal and fibrotic endometrium, and main components of Wnt/β-catenin signaling pathway in vitro. Hematoxylin and eosin and Masson staining were used to evaluate the effect of estrogen on endometrial morphology and fibrosis in vivo. Our results indicated that the proliferation of normal hEECs was inhibited by estrogen at a concentration of 30 nM accompanied by upregulation of mesenchymal markers and downregulation of epithelial markers. Interestingly, in the model of transforming growth factor β1 (TGF-β1)-induced endometrial fibrosis, the same concentration of estrogen inhibited the process of EMT, which might be partially mediated by regulation of the Wnt/β-catenin pathway. In addition, relatively high doses of estrogen efficiently increased the number of endometrial glands and reduced the area of fibrosis as determined by the reduction of EMT in IUA animal models. Taken together, our results demonstrated that an appropriate concentration of estrogen may prevent the occurrence and development of IUA by inhibiting the TGF-β1-induced EMT and activating the Wnt/β-catenin pathway.

The estrogen-signalling pathway is critical for normal follicular development; however, little is known about its importance during in vitro maturation (IVM) in large animals, particularly yaks (Bos grunniens). Through the present study, we aimed to determine the mechanisms underlying estrogen involvement in cumulus expansion and the subsequent development of cumulus-oocyte complexes (COCs). COCs were cultured in the maturation medium supplemented with different concentrations (10-6-10-3 mM) of 17β-estradiol (E2) or its receptor antagonist, fulvestrant, and quantitative reverse-transcription polymerase chain reaction (qRT-PCR) and western blot were performed to determine the expression of cumulus-expansion related factors and oocyte-secreted factors (OSFs). The cumulus expansion of COCs was observed using an inverted microscope, and COCs developmental ability were judged by the evaluation of cleavage and blastulation rates per inseminated oocytes by IVF, and the number of cells in the blastocyst. Cumulus expansion increased with 10-6-10-3 mM E2, but decreased with fulvestrant. HAS2, PTGS2, PTX3 and OSFs expression increased in the 10-6-10-3 mM E2 groups. Significantly higher cleavage and blastocyst rates were observed in the 10-4 mM E2 group than in the fulvestrant and 0 mM E2 groups. Moreover, in the 10-4 mM group, blastocysts at 7 days had higher cell counts than the other groups. In conclusion, the increase in cumulus expansion and subsequent oocyte development after the addition of E2 to IVM medium may have resulted from increased cumulus-expansion-related factor expression and OSF levels.

The existing safety analysis methods for the assessment of the aerostatic stability of long-span symmetry cable-stayed bridges have difficulties in meeting the requirements of engineering applications. Based on the finite element method and the inverse reliability theory, an approach for the probabilistic safety analysis of the aerostatic instability of long-span symmetry cable-stayed bridges is proposed here. The probabilistic safety factor of aerostatic instability of long-span symmetry cable-stayed bridges was estimated using the proposed method, with Sutong Bridge as an example. The probabilistic safety factors for the aerostatic instability of Sutong Bridge were calculated using the finite element inverse reliability method, based on the FORM approach. The influences of the mean value and the coefficient of variation of random variables, as well as the iterative step length of finite difference, on the probabilistic safety factors of aerostatic instability of Sutong Bridge were analyzed. The results indicated that it is necessary to consider the uncertainties of random variables in probabilistic safety factor assessments of aerostatic instability in cable-stayed bridges using the proposed method, which could be recommended for the assessment of safety factors involved in the aerostatic instability of long-span symmetry cable-stayed bridges. The randomness of the parameters had an important influence on the probabilistic safety factor of the aerostatic stability of Sutong Bridge. Neglecting the randomness of these parameters may result in instability of the structure.

The measured vibrational responses of the pumping station pipeline in the irrigation site were chosen to confirm the chaotic characteristics of the pumping station pipeline vibration and to determine the vibrational excitation that makes it chaotic. First, the chaotic properties of the pipeline vibration responses were investigated using a saturation correlation dimension and the maximum Lyapunov exponent. The vibration excitation with chaotic features was obtained using an improved variational mode decomposition (IVMD) method to examine the multi-time-scale chaotic characteristics of the pipeline vibration responses. The results show that the vibrational responses of each measuring point of the pipeline under different operating conditions have clear chaotic characteristics, where the chaotic characteristics of the axial points and bifurcated pipe points are relatively strong. The vibration of the operating conditions and measurement points affected by the unit’s operation and flow state change is further complicated. The intrinsic mode function (IMF) produces a low-dimensional chaotic attractor after the IVMD disrupts the vibration response. Still, the vibration excitation of the remaining components on behalf of the units does not have chaotic properties, implying that water pulsation excitation makes the pumping station pipeline vibrations chaotic. The vibration excitation caused by the unit’s operation covers the chaotic characteristics of the pipeline vibration and increases its uncertainty. The outcomes of this study provide a theoretical basis for further exploration of the vibration characteristics of pumping station pipelines, and a new method of chaos analysis is proposed.

The Jiaoshiba shale gas field is located in the Fuling area of the Sichuan Basin, with the Upper Ordovician WufengâLower Silurian Longmaxi Fm as the pay zone. At the bottom of the pay zone, a high-quality shale gas reservoir about 20Â m thick is generally developed with high organic contents and gas abundance, but its resistivity is relatively low. Accordingly, the gas saturation calculated by formulas (e.g. Archie) using electric logging data is often much lower than the experiment-derived value. In this paper, a new method was presented for calculating gas saturation more accurately based on non-electric logging data. Firstly, the causes for the low resistivity of shale gas reservoirs in this area were analyzed. Then, the limitation of traditional methods for calculating gas saturation based on electric logging data was diagnosed, and the feasibility of the neutronâdensity porosity overlay method was illustrated. According to the response characteristics of neutron, density and other porosity logging in shale gas reservoirs, a model for calculating gas saturation of shale gas was established by core experimental calibration based on the density logging value, the density porosity and the difference between density porosity and neutron porosity, by means of multiple methods (e.g. the dual-porosity overlay method by optimizing the best overlay coefficient). This new method avoids the effect of low resistivity, and thus can provide normal calculated gas saturation of high-quality shale gas reservoirs. It works well in practical application. This new method provides a technical support for the calculation of shale gas reserves in this area. Keywords: Shale gas, Gas saturation, Low resistivity, Non-electric logging, Volume density, Compensated neutron, Overlay method, Reserves calculation, Sichuan Basin, Jiaoshiba shale gas field

This paper presents the outcomes of a research program that tested and examined the behaviors of glass fiber-reinforced polymer (GFRP) bonded steel double-strap joints after being cured in a variety of harsh curing conditions. Nineteen specimens were manufactured, cured in an air environment (the reference specimen), treated with different wet–dry cyclic curing or hygrothermal pretreatment, and then tested under quasi-static loading. Based on the experimental studies, mixed failure modes, rather than the cohesive failure of the adhesive, were found in the harsh environmental cured specimens. Additionally, an approximately linear relationship of load–displacement curves was observed for all the GFRP/steel bonded specimens from which the tensile capacities and stiffness were discussed. By analyzing the strain development of the bonded specimens during quasi-static tensile testing, the fracture mechanism analysis focused on the threshold value of the strain curves for different cured specimens. Finally, based on the studies of interfacial fracture energy, Gf, the effects of harsh environmental curing were assessed. The results showed that the failure modes, joint tensile capacities, stiffness, and interfacial fracture energy Gf were highly dependent on the curing conditions, and a significant degradation of bonding performance could be introduced by the investigated harsh environments.

The main reproductive organs undergo different histological appearances and physiological processes under different reproductive statuses. The variation of these organs depends on a delicate regulation of cell proliferation, differentiation, and apoptosis. Extracellular signal-regulated kinases1/2 (ERK1/2) are members of the mitogen-activated protein kinase (MAPK) super family. They have important roles in regulating various biological processes of different cells, tissues, and organ types. Activated ERK1/2 generally promotes cell survival, but under certain conditions, ERK1/2 also have the function of inducing apoptosis. It is widely believed that ERK1/2 play a significant role in regulating the reproductive processes of mammals. The goal of our research is to investigate the expression and distribution of ERK1/2 in the yak’s main reproductive organs during different stages. In the present study, samples of the ovary, oviduct, and uterus of 15 adult female yak were collected and used in the experiment. The ERK1/2 proteins, localization, and quantitative expression of their mRNA were investigated using immunohistochemistry (IHC), western blot (WB) and relative quantitative real-time polymerase chain reaction (RT-PCR). The results indicated that ERK1/2 proteins and their mRNA were highly expressed in the ovary of the luteal phase and gestation period, in the oviduct of the luteal phase, and in the uterus of the luteal phase and gestation period. Immunohistochemical analysis revealed a strong distribution of ERK1/2 proteins in follicular granulosa cells, granular luteal cells, villous epithelial cells of the oviduct, endometrial glandular epithelium, and luminal epithelium. These results demonstrated that the expression of ERK1 and ERK2 proteins and their mRNA in the yak’s ovary, oviduct, and uterus varies with the stage of the reproductive cycle. The variation character of ERK1 and ERK 2 expression in the yak’s main reproductive organs during different stages implies that they play an important role in regulating the reproductive function under different physiological statuses.

Radio frequency identification (RFID) has recently experienced unprecedented development. Among many other areas, it has been widely applied in blood station management, automatic supermarket checkout, and logistics. In the application of RFID for large-scale passive tags, tag collision is inevitable owing to the non-cooperation mechanism among tags. Therefore, a tag anti-collision method is a key factor affecting the identification efficiency. In this paper, we propose a tag anti-collision method based on Aloha technology for RFID. It estimates the number of remaining tags using the secant iteration method. To achieve optimal identification efficiency, it adaptively and dynamically adjusts the lengths of the subsequent frames according to the principle that the length of a frame should be the same as the number of tags to be identified. For pseudo-solutions of tag population estimation while using secant iteration, we present an elimination method by two probing frames. The simulation results show that the estimation precision of our method can reach above 97%. Thus, it can meet the requirement of the tag anti-collision estimation accuracy. Its global throughput is obviously superior to the Q algorithm adopted by the current international standard, and it is close to the ideal system. It consequently outperforms existing schemes.

C-repeat binding factor- (CBF-) dependent signaling pathway is proposed to be a key responder to low temperature stress in plant. Jasmonates (JAs), the endogenous signal molecules in plant, participate in plant defense against (a)biotic stresses; however, the mechanism has not been fully clarified so far. With the progress made in JAs biopathway, signal transduction, and their relationship with CBF-dependent signaling pathway, our knowledge of the roles of the CBF-dependent signaling pathway in JAs-mediated improvement of chilling tolerance accumulates. In this review, we firstly briefly review the chilling injury (CI) characteristics of postharvest horticultural commodities, then introduce the biopathway and signal transduction of JAs, subsequently summarize the roles of the CBF-dependent signaling pathway under low temperature stress, and finally describe the linkage between JAs signal transduction and the CBF-dependent signaling pathway.

Five measurements of claw conformation (toe angle, claw height, claw width, toe length and abaxial groove length) taken directly from the hoof were compared with the measurements taken from digital images of the same claws. Concordance correlation coefficients and limits-of-agreement analysis showed that, for four of the five measures (claw height, claw width, toe length and abaxial groove length), agreement was too poor for digital and manual measures to be used interchangeably. For all four of these measures, Liao’s modified concordance correlation coefficient (mCCC) was ≤0.4, indicating poor concordance despite Pearson’s correlation being >0.6 in all cases. The worst concordance was seen for toe length (mCCC = 0.13). Limits-of-agreement analysis showed that, for all four measures, there was a large variation in the difference between the manual and digital methods, even when the effect of mean on difference was accounted for, with the 95% limits-of-agreement for the four measures being further away from the mean difference than 10% of the mean in all four cases. The only one of the five measures with an acceptable concordance between digital and manual measurement was toe angle (mCCC = 0.81). Nevertheless, the limits-of-agreement analysis showed that there was a systematic bias with, on average, the manual measure of toe angle, being 2.1° smaller than the digital. The 95% limits-of-agreement for toe angle were ±3.4°, probably at the upper limit of what is acceptable. However, the lack of data on the variability of individual measurements of claw conformation means that it is unclear how this variability compares to measurement of toe angle in the same animal using the same or a different manual technique.

The compound fuling granule (CFG) is a traditional Chinese drug which has been used to treat ovarian cancer in China for over twenty years. Nevertheless, the underlying molecular mechanism of its anti-cancer effect remains unclear. In this study, microarray data analysis was performed to search differentially expressed genes in CFG-treated ovarian cancer cells. Several cell cycle and epithelial-mesenchymal transition (EMT) related genes were identified. The microarray analyses also revealed that CFG potentially regulates EMT in ovarian cancer. We also found that, functionally, CFG significantly suppresses ovarian cancer cell proliferation by cell cycle arrest, apoptosis and senescence and the AKT/GSK-3β pathway is possibly involved. Additionally, the invasion and migration ability of ovarian cancer induced by TGFβ is significantly suppressed by CFG. In conclusion, our results demonstrated that CFG suppresses ovarian cancer cell proliferation as well as TGFβ1-induced EMT in vitro. Finally, we discovered that CFG suppresses tumor growth and distant metastasis in vivo. Overall, these findings provide helpful clues to design novel clinical treatments against cancer.

Proper initial load is necessary to ensure the stability of the bolted connections. In order to apply appropriate torque, the relationship between tightening torque and initial load should be determined. In this study, a detailed three-dimensional finite element model of bolted joints was established with consideration of helix angle, pitch, thread type, tooth-type angle, and other details. The process of pre-tightening of bolted joints was simulated to validate the finite element model. The curves for the relationship between the torque and initial load obtained from finite element analysis agree well with those calculated from theoretical equations. Then, the influence of the friction coefficient, pitch, elastic modulus, assembly clearance, and strain-hardening exponent on the relationship was studied. The results show that the friction coefficient between nut and joint has great influence on the relationship between torque and initial load, that is, the larger the friction coefficient, the smaller the initial load of bolt at the same tightening torque. In contrast, the pitch, assembly clearance, Young’s modulus, and strain-hardening exponent have little influence on torque–initial load relation. The method used in this study provides a theoretical basis for accurately determining the tightening torque for bolted joints.

GyroWheel is an innovative device that combines the actuating capabilities of a control moment gyro with the rate sensing capabilities of a tuned rotor gyro by using a spinning flex-gimbal system. However, in the process of the ground test, the existence of aerodynamic disturbance is inevitable, which hinders the improvement of the specification performance and control accuracy. A vacuum tank test is a possible candidate but is sometimes unrealistic due to the substantial increase in costs and complexity involved. In this paper, the aerodynamic drag problem with respect to the 3-DOF flex-gimbal GyroWheel system is investigated by simulation analysis and experimental verification. Concretely, the angular momentum envelope property of the spinning rotor system is studied and its integral dynamical model is deduced based on the physical configuration of the GyroWheel system with an appropriately defined coordinate system. In the sequel, the fluid numerical model is established and the model geometries are checked with FLUENT software. According to the diversity and time-varying properties of the rotor motions in three-dimensions, the airflow field around the GyroWheel rotor is analyzed by simulation with respect to its varying angular velocity and tilt angle. The IPC-based experimental platform is introduced, and the properties of aerodynamic drag in the ground test condition are obtained through comparing the simulation with experimental results.

Cast steel nodes are being increasingly popular in steel structure joint application as their advanced mechanical performances and flexible forms. This kind of joints improves the structural antifatigue capability observably and is expected to be widely used in the structures with fatigue loadings. Cast steel node joint consists of two parts: casting itself and the welds between the node and the steel member. The fatigue resistances of these two parts are very different; the experiment results showed very clearly that the fatigue behavior was governed by the welds in all tested configurations. This paper focuses on the balance fatigue design of these two parts in a cast steel node joint using fracture mechanics and FEM. The defects in castings are simulated by cracks conservatively. The final crack size is decided by the minimum of 90% of the wall thickness and the value deduced by fracture toughness. The allowable initial crack size could be obtained through the integral of Paris equation when the crack propagation life is considered equal to the weld fatigue life; therefore, the two parts in a cast steel node joint will have a balance fatigue life.

This paper presents a simple methodology to perform a high temperature coupled thermo-mechanical test using ultra-high temperature ceramic material specimens (UHTCs), which are equipped with chemical composition gratings sensors (CCGs). The methodology also considers the presence of coupled loading within the response provided by the CCG sensors. The theoretical strain of the UHTCs specimens calculated with this technique shows a maximum relative error of 2.15% between the analytical and experimental data. To further verify the validity of the results from the tests, a Finite Element (FE) model has been developed to simulate the temperature, stress and strain fields within the UHTC structure equipped with the CCG. The results show that the compressive stress exceeds the material strength at the bonding area, and this originates a failure by fracture of the supporting structure in the hot environment. The results related to the strain fields show that the relative error with the experimental data decrease with an increase of temperature. The relative error is less than 15% when the temperature is higher than 200 °C, and only 6.71% at 695 °C.