Search

The effects of radiated radio-frequency interference (RFI) on the operation of digital systems are studied by simulating the response of simple logic circuits to incident plane waves. The simulation is accomplished by combining a linear electromagnetic moment-method model of the wire structure with a nonlinear circuit model of the solid-state components. The complete model is analyzed in the linear and noulinear regimes as an example. It is shown how a circuit simulator, such as SPICE, can be used in the analysis of an arbitrary wire network loaded with logic circuits, by the process of representing the linear wire network as a lumped-element N-port [Pi] network and interfacing it to the nonlinear circuit simulator. Examples are given that demonstrate the occurrence of both static and dynamic failures under various RFI-field excitations and wire structure geometries. The prediction methods presented in this paper, can be used by eme engineers to assess the likelihood of failures in RFI-exposed digital systems.

Delays induced by radio frequency interference (RFI) in CMOS inverters are measured under radiated and capacitively coupled interference. Experimental and theoretical investigations of the effects of the RFI coupling mode (capacitive venus inductive) on the amount of induced delay are presented and a worst-case coupling mode is identified. A formula to predict delays caused by in-band low-level RFI in CMOS inverters is introduced. This formula uses experimentally determined parameters which are dependent on the coupling mode. The change in delay is computed as a function of the induced voltage disturbance, which in turn can be computed from the incident field using linear frequency-domain analysis. The formula accounts for the dependence of the induced delay on the phase and amplitude of the RFI signal as web as on the slew rate of the logic transitions. A delay growth phenomenon in a string of inverters is identified and characterized. A correction to the delay prediction formula is proposed in order to take this growth into account in worst-case predictions.

In this work, we present a bilateral reflectionless filter topology. A low‐pass filter prototype and its theoretical frequency responses are given. The frequency responses are obtained by means of ABCD matrices, thereby showing that the proposed prototype is reciprocal, symmetrical, and reflectionless at both ports. A first‐order bandpass filter with the reflectionless characteristic has been designed by applying the conventional low‐pass‐to‐bandpass transformation to the proposed low‐pass filter topology. It is verified by measurement results that the proposed bandpass filter can have less than −20 dB reflection coefficient over the passband and stopband at both ports with the same transmission response of a conventional first‐order bandpass filter. [ABSTRACT FROM AUTHOR]

A near-field to far-field transformation based on the antenna representation by equivalent magnetic current (EMC) sources has been proposed and validated experimentally on large high-directivity antenna arrays. In this paper, the use of EMC is extended to the diagnostics of low-directivity printed antennas. The limitation of the near-field to far-field transformation applied to EMC models of low-directivity antennas, caused by the finite dimensions of the antenna ground plane, is demonstrated. A method to partially overcome this limitation by including the contribution of diffracted rays is implemented, and its effectiveness is demonstrated with antenna prototypes. It is shown that the agreement between the far-field patterns measured in an anechoic chamber and the patterns computed from the EMC model obtained from the near-field measurements is significantly improved upon, within a sector of [+ or -] 90 [degrees] with respect to the antenna boresight in the E plane. The influence of the near-field sampling density and topology of the EMC model on the accuracy of the predicted far-field pattern is examined. Index Terms--Near field, printed antennas.

In this paper, design considerations and experimental investigations of an integrated active antenna for space power combining that makes use of unidirectional dielectric radiators (UDRs) are presented and discussed. Attractive electrical performance stemmed from proprieties of nonradiating dielectric waveguide structures is benefited to design a prototype at a frequency of 14 GHz. An UDR feed circuit is implemented by microstrip lines and aperture-coupling is studied experimentally for arrays of two, four, and eight radiators. Measurements show high coupling and radiation efficiencies of the proposed excitation method. A power-combining efficiency of 89% was measured and a gain of 23.1 dBi was achieved for an antenna with eight radiators and four amplifiers. It is also shown that such a circuit configuration allows the combination of planar K u-band monolithic hybrid microwave integrated circuit and UDR components in flexible design of active array antennas.

An investigation of the multifilament current method's (MFCM) ability to solve electromagnetic scattering and/or absorption problems involving inhomogeneous cylindrical structures is presented. Dielectric cylinders of arbitrary cross section covered by multiple layers of lossy dielectrics are considered. Both cases of wave incidence, TM and TE, are treated. Like some other moment-method solutions, the MFCM experiences numerical difficulties when dealing with a medium characterized by a high loss tangent or large electrical conductivity. To overcome this problem, a new boundary condition based on an impedance matrix equivalent circuit approach that accounts for the curvature of the surfaces has been developed. This new impedance matrix boundary condition (IMBC) extends the MFCM capability to the analysis of two-dimensional (2-D) structures involving conducting layers with ohmic losses. The usefulness of this extended method is confirmed by the study of metallic shells for which a strong energy coupling with the incident electromagnetic (EM) field is demonstrated at their structural resonance frequencies. Index Terms--Impedance matrix boundary condition, multifilament current method, shielding.

A simple and low-cost single substrate layer Luneburg lens-based beamforming network (BFN) operating in $W$ -band is proposed. A multibeam antenna is then realized using the novel BFN and fabricated using a low-cost printed circuit board process. The Luneburg lens is realized by drilling holes in a substrate, and to extend the refractive index variation, a high dielectric constant substrate is embedded at the lens center. The lens is excited by radially placed open-ended substrate integrated waveguides (SIWs) at the lens circumference, feeding a subset of antenna ports placed on the opposite side of the lens. The proposed BFN thus provides half-power beamwidth (HPBW) and beam steering angle flexibility for multibeam antennas. An antenna generating seven beams was prototyped at 79.5 GHz to validate this BFN, providing measured beam steering of approximately ±41° with a broadside HPBW of 10°. The bandwidth of the proposed BFN is determined by the single-mode operation of the SIW. The fabricated multibeam antenna impedance bandwidth is, however, about 2% at 79.5 GHz because of the radiating elements. The radiating elements are series fed slot arrays placed on SIWs. [ABSTRACT FROM AUTHOR]